From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Georgi Djakov <djakov@kernel.org>, Will Deacon <will@kernel.org>,
Robin Murphy <robin.murphy@arm.com>,
Joerg Roedel <joro@8bytes.org>,
Manivannan Sadhasivam <mani@kernel.org>,
Jassi Brar <jassisinghbrar@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Richard Cochran <richardcochran@gmail.com>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Vinod Koul <vkoul@kernel.org>, Alex Elder <elder@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
iommu@lists.linux.dev, linux-gpio@vger.kernel.org,
netdev@vger.kernel.org,
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Subject: [PATCH 01/18] dt-bindings: clock: sa8775p: add bindings for Qualcomm gcc-sa8775p
Date: Mon, 9 Jan 2023 18:44:54 +0100 [thread overview]
Message-ID: <20230109174511.1740856-2-brgl@bgdev.pl> (raw)
In-Reply-To: <20230109174511.1740856-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add DT bindings for the GCC clock on SA8775P platforms. Add relevant
DT include definitions as well.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
.../bindings/clock/qcom,gcc-sa8775p.yaml | 77 +++++
include/dt-bindings/clock/qcom,gcc-sa8775p.h | 320 ++++++++++++++++++
2 files changed, 397 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sa8775p.yaml
create mode 100644 include/dt-bindings/clock/qcom,gcc-sa8775p.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sa8775p.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sa8775p.yaml
new file mode 100644
index 000000000000..35d92d94495a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sa8775p.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sa8775p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on sa8775p
+
+maintainers:
+ - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description: |
+ Qualcomm global clock control module provides the clocks, resets and
+ power domains on sa8775p.
+
+ See also:: include/dt-bindings/clock/qcom,gcc-sa8775p.h
+
+properties:
+ compatible:
+ const: qcom,gcc-sa8775p
+
+ clocks:
+ items:
+ - description: XO reference clock
+ - description: Sleep clock
+ - description: UFS memory first RX symbol clock
+ - description: UFS memory second RX symbol clock
+ - description: UFS memory first TX symbol clock
+ - description: UFS card first RX symbol clock
+ - description: UFS card second RX symbol clock
+ - description: UFS card first TX symbol clock
+ - description: Primary USB3 PHY wrapper pipe clock
+ - description: Secondary USB3 PHY wrapper pipe clock
+ - description: PCIe 0 pipe clock
+ - description: PCIe 1 pipe clock
+ - description: PCIe PHY clock
+ - description: First EMAC controller reference clock
+ - description: Second EMAC controller reference clock
+
+ protected-clocks:
+ maxItems: 240
+
+required:
+ - compatible
+ - clocks
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ gcc: clock-controller@100000 {
+ compatible = "qcom,gcc-sa8775p";
+ reg = <0x100000 0xc7018>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <&usb_0_ssphy>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ };
+...
diff --git a/include/dt-bindings/clock/qcom,gcc-sa8775p.h b/include/dt-bindings/clock/qcom,gcc-sa8775p.h
new file mode 100644
index 000000000000..badc253379c9
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,gcc-sa8775p.h
@@ -0,0 +1,320 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SA8775P_H
+#define _DT_BINDINGS_CLK_QCOM_GCC_SA8775P_H
+
+/* GCC clocks */
+#define GCC_GPLL0 0
+#define GCC_GPLL0_OUT_EVEN 1
+#define GCC_GPLL1 2
+#define GCC_GPLL4 3
+#define GCC_GPLL5 4
+#define GCC_GPLL7 5
+#define GCC_GPLL9 6
+#define GCC_AGGRE_NOC_QUPV3_AXI_CLK 7
+#define GCC_AGGRE_UFS_CARD_AXI_CLK 8
+#define GCC_AGGRE_UFS_PHY_AXI_CLK 9
+#define GCC_AGGRE_USB2_PRIM_AXI_CLK 10
+#define GCC_AGGRE_USB3_PRIM_AXI_CLK 11
+#define GCC_AGGRE_USB3_SEC_AXI_CLK 12
+#define GCC_AHB2PHY0_CLK 13
+#define GCC_AHB2PHY2_CLK 14
+#define GCC_AHB2PHY3_CLK 15
+#define GCC_BOOT_ROM_AHB_CLK 16
+#define GCC_CAMERA_AHB_CLK 17
+#define GCC_CAMERA_HF_AXI_CLK 18
+#define GCC_CAMERA_SF_AXI_CLK 19
+#define GCC_CAMERA_THROTTLE_XO_CLK 20
+#define GCC_CAMERA_XO_CLK 21
+#define GCC_CFG_NOC_USB2_PRIM_AXI_CLK 22
+#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK 23
+#define GCC_CFG_NOC_USB3_SEC_AXI_CLK 24
+#define GCC_DDRSS_GPU_AXI_CLK 25
+#define GCC_DISP1_AHB_CLK 26
+#define GCC_DISP1_HF_AXI_CLK 27
+#define GCC_DISP1_XO_CLK 28
+#define GCC_DISP_AHB_CLK 29
+#define GCC_DISP_HF_AXI_CLK 30
+#define GCC_DISP_XO_CLK 31
+#define GCC_EDP_REF_CLKREF_EN 32
+#define GCC_EMAC0_AXI_CLK 33
+#define GCC_EMAC0_PHY_AUX_CLK 34
+#define GCC_EMAC0_PHY_AUX_CLK_SRC 35
+#define GCC_EMAC0_PTP_CLK 36
+#define GCC_EMAC0_PTP_CLK_SRC 37
+#define GCC_EMAC0_RGMII_CLK 38
+#define GCC_EMAC0_RGMII_CLK_SRC 39
+#define GCC_EMAC0_SLV_AHB_CLK 40
+#define GCC_EMAC1_AXI_CLK 41
+#define GCC_EMAC1_PHY_AUX_CLK 42
+#define GCC_EMAC1_PHY_AUX_CLK_SRC 43
+#define GCC_EMAC1_PTP_CLK 44
+#define GCC_EMAC1_PTP_CLK_SRC 45
+#define GCC_EMAC1_RGMII_CLK 46
+#define GCC_EMAC1_RGMII_CLK_SRC 47
+#define GCC_EMAC1_SLV_AHB_CLK 48
+#define GCC_GP1_CLK 49
+#define GCC_GP1_CLK_SRC 50
+#define GCC_GP2_CLK 51
+#define GCC_GP2_CLK_SRC 52
+#define GCC_GP3_CLK 53
+#define GCC_GP3_CLK_SRC 54
+#define GCC_GP4_CLK 55
+#define GCC_GP4_CLK_SRC 56
+#define GCC_GP5_CLK 57
+#define GCC_GP5_CLK_SRC 58
+#define GCC_GPU_CFG_AHB_CLK 59
+#define GCC_GPU_GPLL0_CLK_SRC 60
+#define GCC_GPU_GPLL0_DIV_CLK_SRC 61
+#define GCC_GPU_MEMNOC_GFX_CLK 62
+#define GCC_GPU_SNOC_DVM_GFX_CLK 63
+#define GCC_GPU_TCU_THROTTLE_AHB_CLK 64
+#define GCC_GPU_TCU_THROTTLE_CLK 65
+#define GCC_PCIE_0_AUX_CLK 66
+#define GCC_PCIE_0_AUX_CLK_SRC 67
+#define GCC_PCIE_0_CFG_AHB_CLK 68
+#define GCC_PCIE_0_MSTR_AXI_CLK 69
+#define GCC_PCIE_0_PHY_AUX_CLK 70
+#define GCC_PCIE_0_PHY_AUX_CLK_SRC 71
+#define GCC_PCIE_0_PHY_RCHNG_CLK 72
+#define GCC_PCIE_0_PHY_RCHNG_CLK_SRC 73
+#define GCC_PCIE_0_PIPE_CLK 74
+#define GCC_PCIE_0_PIPE_CLK_SRC 75
+#define GCC_PCIE_0_PIPE_DIV_CLK_SRC 76
+#define GCC_PCIE_0_PIPEDIV2_CLK 77
+#define GCC_PCIE_0_SLV_AXI_CLK 78
+#define GCC_PCIE_0_SLV_Q2A_AXI_CLK 79
+#define GCC_PCIE_1_AUX_CLK 80
+#define GCC_PCIE_1_AUX_CLK_SRC 81
+#define GCC_PCIE_1_CFG_AHB_CLK 82
+#define GCC_PCIE_1_MSTR_AXI_CLK 83
+#define GCC_PCIE_1_PHY_AUX_CLK 84
+#define GCC_PCIE_1_PHY_AUX_CLK_SRC 85
+#define GCC_PCIE_1_PHY_RCHNG_CLK 86
+#define GCC_PCIE_1_PHY_RCHNG_CLK_SRC 87
+#define GCC_PCIE_1_PIPE_CLK 88
+#define GCC_PCIE_1_PIPE_CLK_SRC 89
+#define GCC_PCIE_1_PIPE_DIV_CLK_SRC 90
+#define GCC_PCIE_1_PIPEDIV2_CLK 91
+#define GCC_PCIE_1_SLV_AXI_CLK 92
+#define GCC_PCIE_1_SLV_Q2A_AXI_CLK 93
+#define GCC_PCIE_CLKREF_EN 94
+#define GCC_PCIE_THROTTLE_CFG_CLK 95
+#define GCC_PDM2_CLK 96
+#define GCC_PDM2_CLK_SRC 97
+#define GCC_PDM_AHB_CLK 98
+#define GCC_PDM_XO4_CLK 99
+#define GCC_QMIP_CAMERA_NRT_AHB_CLK 100
+#define GCC_QMIP_CAMERA_RT_AHB_CLK 101
+#define GCC_QMIP_DISP1_AHB_CLK 102
+#define GCC_QMIP_DISP1_ROT_AHB_CLK 103
+#define GCC_QMIP_DISP_AHB_CLK 104
+#define GCC_QMIP_DISP_ROT_AHB_CLK 105
+#define GCC_QMIP_VIDEO_CVP_AHB_CLK 106
+#define GCC_QMIP_VIDEO_VCODEC_AHB_CLK 107
+#define GCC_QMIP_VIDEO_VCPU_AHB_CLK 108
+#define GCC_QUPV3_WRAP0_CORE_2X_CLK 109
+#define GCC_QUPV3_WRAP0_CORE_CLK 110
+#define GCC_QUPV3_WRAP0_S0_CLK 111
+#define GCC_QUPV3_WRAP0_S0_CLK_SRC 112
+#define GCC_QUPV3_WRAP0_S1_CLK 113
+#define GCC_QUPV3_WRAP0_S1_CLK_SRC 114
+#define GCC_QUPV3_WRAP0_S2_CLK 115
+#define GCC_QUPV3_WRAP0_S2_CLK_SRC 116
+#define GCC_QUPV3_WRAP0_S3_CLK 117
+#define GCC_QUPV3_WRAP0_S3_CLK_SRC 118
+#define GCC_QUPV3_WRAP0_S4_CLK 119
+#define GCC_QUPV3_WRAP0_S4_CLK_SRC 120
+#define GCC_QUPV3_WRAP0_S5_CLK 121
+#define GCC_QUPV3_WRAP0_S5_CLK_SRC 122
+#define GCC_QUPV3_WRAP0_S6_CLK 123
+#define GCC_QUPV3_WRAP0_S6_CLK_SRC 124
+#define GCC_QUPV3_WRAP1_CORE_2X_CLK 125
+#define GCC_QUPV3_WRAP1_CORE_CLK 126
+#define GCC_QUPV3_WRAP1_S0_CLK 127
+#define GCC_QUPV3_WRAP1_S0_CLK_SRC 128
+#define GCC_QUPV3_WRAP1_S1_CLK 129
+#define GCC_QUPV3_WRAP1_S1_CLK_SRC 130
+#define GCC_QUPV3_WRAP1_S2_CLK 131
+#define GCC_QUPV3_WRAP1_S2_CLK_SRC 132
+#define GCC_QUPV3_WRAP1_S3_CLK 133
+#define GCC_QUPV3_WRAP1_S3_CLK_SRC 134
+#define GCC_QUPV3_WRAP1_S4_CLK 135
+#define GCC_QUPV3_WRAP1_S4_CLK_SRC 136
+#define GCC_QUPV3_WRAP1_S5_CLK 137
+#define GCC_QUPV3_WRAP1_S5_CLK_SRC 138
+#define GCC_QUPV3_WRAP1_S6_CLK 139
+#define GCC_QUPV3_WRAP1_S6_CLK_SRC 140
+#define GCC_QUPV3_WRAP2_CORE_2X_CLK 141
+#define GCC_QUPV3_WRAP2_CORE_CLK 142
+#define GCC_QUPV3_WRAP2_S0_CLK 143
+#define GCC_QUPV3_WRAP2_S0_CLK_SRC 144
+#define GCC_QUPV3_WRAP2_S1_CLK 145
+#define GCC_QUPV3_WRAP2_S1_CLK_SRC 146
+#define GCC_QUPV3_WRAP2_S2_CLK 147
+#define GCC_QUPV3_WRAP2_S2_CLK_SRC 148
+#define GCC_QUPV3_WRAP2_S3_CLK 149
+#define GCC_QUPV3_WRAP2_S3_CLK_SRC 150
+#define GCC_QUPV3_WRAP2_S4_CLK 151
+#define GCC_QUPV3_WRAP2_S4_CLK_SRC 152
+#define GCC_QUPV3_WRAP2_S5_CLK 153
+#define GCC_QUPV3_WRAP2_S5_CLK_SRC 154
+#define GCC_QUPV3_WRAP2_S6_CLK 155
+#define GCC_QUPV3_WRAP2_S6_CLK_SRC 156
+#define GCC_QUPV3_WRAP3_CORE_2X_CLK 157
+#define GCC_QUPV3_WRAP3_CORE_CLK 158
+#define GCC_QUPV3_WRAP3_QSPI_CLK 159
+#define GCC_QUPV3_WRAP3_S0_CLK 160
+#define GCC_QUPV3_WRAP3_S0_CLK_SRC 161
+#define GCC_QUPV3_WRAP3_S0_DIV_CLK_SRC 162
+#define GCC_QUPV3_WRAP_0_M_AHB_CLK 163
+#define GCC_QUPV3_WRAP_0_S_AHB_CLK 164
+#define GCC_QUPV3_WRAP_1_M_AHB_CLK 165
+#define GCC_QUPV3_WRAP_1_S_AHB_CLK 166
+#define GCC_QUPV3_WRAP_2_M_AHB_CLK 167
+#define GCC_QUPV3_WRAP_2_S_AHB_CLK 168
+#define GCC_QUPV3_WRAP_3_M_AHB_CLK 169
+#define GCC_QUPV3_WRAP_3_S_AHB_CLK 170
+#define GCC_SDCC1_AHB_CLK 171
+#define GCC_SDCC1_APPS_CLK 172
+#define GCC_SDCC1_APPS_CLK_SRC 173
+#define GCC_SDCC1_ICE_CORE_CLK 174
+#define GCC_SDCC1_ICE_CORE_CLK_SRC 175
+#define GCC_SGMI_CLKREF_EN 176
+#define GCC_TSCSS_AHB_CLK 177
+#define GCC_TSCSS_CNTR_CLK_SRC 178
+#define GCC_TSCSS_ETU_CLK 179
+#define GCC_TSCSS_GLOBAL_CNTR_CLK 180
+#define GCC_UFS_CARD_AHB_CLK 181
+#define GCC_UFS_CARD_AXI_CLK 182
+#define GCC_UFS_CARD_AXI_CLK_SRC 183
+#define GCC_UFS_CARD_ICE_CORE_CLK 184
+#define GCC_UFS_CARD_ICE_CORE_CLK_SRC 185
+#define GCC_UFS_CARD_PHY_AUX_CLK 186
+#define GCC_UFS_CARD_PHY_AUX_CLK_SRC 187
+#define GCC_UFS_CARD_RX_SYMBOL_0_CLK 188
+#define GCC_UFS_CARD_RX_SYMBOL_0_CLK_SRC 189
+#define GCC_UFS_CARD_RX_SYMBOL_1_CLK 190
+#define GCC_UFS_CARD_RX_SYMBOL_1_CLK_SRC 191
+#define GCC_UFS_CARD_TX_SYMBOL_0_CLK 192
+#define GCC_UFS_CARD_TX_SYMBOL_0_CLK_SRC 193
+#define GCC_UFS_CARD_UNIPRO_CORE_CLK 194
+#define GCC_UFS_CARD_UNIPRO_CORE_CLK_SRC 195
+#define GCC_UFS_PHY_AHB_CLK 196
+#define GCC_UFS_PHY_AXI_CLK 197
+#define GCC_UFS_PHY_AXI_CLK_SRC 198
+#define GCC_UFS_PHY_ICE_CORE_CLK 199
+#define GCC_UFS_PHY_ICE_CORE_CLK_SRC 200
+#define GCC_UFS_PHY_PHY_AUX_CLK 201
+#define GCC_UFS_PHY_PHY_AUX_CLK_SRC 202
+#define GCC_UFS_PHY_RX_SYMBOL_0_CLK 203
+#define GCC_UFS_PHY_RX_SYMBOL_0_CLK_SRC 204
+#define GCC_UFS_PHY_RX_SYMBOL_1_CLK 205
+#define GCC_UFS_PHY_RX_SYMBOL_1_CLK_SRC 206
+#define GCC_UFS_PHY_TX_SYMBOL_0_CLK 207
+#define GCC_UFS_PHY_TX_SYMBOL_0_CLK_SRC 208
+#define GCC_UFS_PHY_UNIPRO_CORE_CLK 209
+#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC 210
+#define GCC_USB20_MASTER_CLK 211
+#define GCC_USB20_MASTER_CLK_SRC 212
+#define GCC_USB20_MOCK_UTMI_CLK 213
+#define GCC_USB20_MOCK_UTMI_CLK_SRC 214
+#define GCC_USB20_MOCK_UTMI_POSTDIV_CLK_SRC 215
+#define GCC_USB20_SLEEP_CLK 216
+#define GCC_USB30_PRIM_MASTER_CLK 217
+#define GCC_USB30_PRIM_MASTER_CLK_SRC 218
+#define GCC_USB30_PRIM_MOCK_UTMI_CLK 219
+#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC 220
+#define GCC_USB30_PRIM_MOCK_UTMI_POSTDIV_CLK_SRC 221
+#define GCC_USB30_PRIM_SLEEP_CLK 222
+#define GCC_USB30_SEC_MASTER_CLK 223
+#define GCC_USB30_SEC_MASTER_CLK_SRC 224
+#define GCC_USB30_SEC_MOCK_UTMI_CLK 225
+#define GCC_USB30_SEC_MOCK_UTMI_CLK_SRC 226
+#define GCC_USB30_SEC_MOCK_UTMI_POSTDIV_CLK_SRC 227
+#define GCC_USB30_SEC_SLEEP_CLK 228
+#define GCC_USB3_PRIM_PHY_AUX_CLK 229
+#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC 230
+#define GCC_USB3_PRIM_PHY_COM_AUX_CLK 231
+#define GCC_USB3_PRIM_PHY_PIPE_CLK 232
+#define GCC_USB3_PRIM_PHY_PIPE_CLK_SRC 233
+#define GCC_USB3_SEC_PHY_AUX_CLK 234
+#define GCC_USB3_SEC_PHY_AUX_CLK_SRC 235
+#define GCC_USB3_SEC_PHY_COM_AUX_CLK 236
+#define GCC_USB3_SEC_PHY_PIPE_CLK 237
+#define GCC_USB3_SEC_PHY_PIPE_CLK_SRC 238
+#define GCC_USB_CLKREF_EN 239
+#define GCC_VIDEO_AHB_CLK 240
+#define GCC_VIDEO_AXI0_CLK 241
+#define GCC_VIDEO_AXI1_CLK 242
+#define GCC_VIDEO_XO_CLK 243
+#define GCC_AGGRE_UFS_PHY_AXI_HW_CTL_CLK 244
+#define GCC_UFS_PHY_AXI_HW_CTL_CLK 245
+#define GCC_UFS_PHY_ICE_CORE_HW_CTL_CLK 246
+#define GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK 247
+#define GCC_UFS_PHY_UNIPRO_CORE_HW_CTL_CLK 248
+
+/* GCC resets */
+#define GCC_CAMERA_BCR 0
+#define GCC_DISPLAY1_BCR 1
+#define GCC_DISPLAY_BCR 2
+#define GCC_EMAC0_BCR 3
+#define GCC_EMAC1_BCR 4
+#define GCC_GPU_BCR 5
+#define GCC_MMSS_BCR 6
+#define GCC_PCIE_0_BCR 7
+#define GCC_PCIE_0_LINK_DOWN_BCR 8
+#define GCC_PCIE_0_NOCSR_COM_PHY_BCR 9
+#define GCC_PCIE_0_PHY_BCR 10
+#define GCC_PCIE_0_PHY_NOCSR_COM_PHY_BCR 11
+#define GCC_PCIE_1_BCR 12
+#define GCC_PCIE_1_LINK_DOWN_BCR 13
+#define GCC_PCIE_1_NOCSR_COM_PHY_BCR 14
+#define GCC_PCIE_1_PHY_BCR 15
+#define GCC_PCIE_1_PHY_NOCSR_COM_PHY_BCR 16
+#define GCC_PDM_BCR 17
+#define GCC_QUPV3_WRAPPER_0_BCR 18
+#define GCC_QUPV3_WRAPPER_1_BCR 19
+#define GCC_QUPV3_WRAPPER_2_BCR 20
+#define GCC_QUPV3_WRAPPER_3_BCR 21
+#define GCC_SDCC1_BCR 22
+#define GCC_TSCSS_BCR 23
+#define GCC_UFS_CARD_BCR 24
+#define GCC_UFS_PHY_BCR 25
+#define GCC_USB20_PRIM_BCR 26
+#define GCC_USB2_PHY_PRIM_BCR 27
+#define GCC_USB2_PHY_SEC_BCR 28
+#define GCC_USB30_PRIM_BCR 29
+#define GCC_USB30_SEC_BCR 30
+#define GCC_USB3_DP_PHY_PRIM_BCR 31
+#define GCC_USB3_DP_PHY_SEC_BCR 32
+#define GCC_USB3_PHY_PRIM_BCR 33
+#define GCC_USB3_PHY_SEC_BCR 34
+#define GCC_USB3_PHY_TERT_BCR 35
+#define GCC_USB3_UNIPHY_MP0_BCR 36
+#define GCC_USB3_UNIPHY_MP1_BCR 37
+#define GCC_USB3PHY_PHY_PRIM_BCR 38
+#define GCC_USB3PHY_PHY_SEC_BCR 39
+#define GCC_USB3UNIPHY_PHY_MP0_BCR 40
+#define GCC_USB3UNIPHY_PHY_MP1_BCR 41
+#define GCC_USB_PHY_CFG_AHB2PHY_BCR 42
+#define GCC_VIDEO_BCR 43
+#define GCC_VIDEO_AXI0_CLK_ARES 44
+#define GCC_VIDEO_AXI1_CLK_ARES 45
+
+/* GCC GDSCs */
+#define PCIE_0_GDSC 0
+#define PCIE_1_GDSC 1
+#define UFS_CARD_GDSC 2
+#define UFS_PHY_GDSC 3
+#define USB20_PRIM_GDSC 4
+#define USB30_PRIM_GDSC 5
+#define USB30_SEC_GDSC 6
+#define EMAC0_GDSC 7
+#define EMAC1_GDSC 8
+
+#endif /* _DT_BINDINGS_CLK_QCOM_GCC_SA8775P_H */
--
2.37.2
next prev parent reply other threads:[~2023-01-09 17:45 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-09 17:44 [PATCH 00/18] arm64: qcom: add support for sa8775p-ride Bartosz Golaszewski
2023-01-09 17:44 ` Bartosz Golaszewski [this message]
2023-01-09 18:15 ` [PATCH 01/18] dt-bindings: clock: sa8775p: add bindings for Qualcomm gcc-sa8775p Krzysztof Kozlowski
2023-01-09 18:16 ` Krzysztof Kozlowski
2023-01-09 20:13 ` Rob Herring
2023-01-09 17:44 ` [PATCH 02/18] clk: qcom: add the GCC driver for sa8775p Bartosz Golaszewski
2023-01-09 17:58 ` Konrad Dybcio
2023-01-09 18:18 ` Konrad Dybcio
2023-01-09 21:06 ` Dmitry Baryshkov
2023-01-17 12:44 ` Bartosz Golaszewski
2023-01-17 12:45 ` Dmitry Baryshkov
2023-01-09 17:44 ` [PATCH 03/18] arm64: defconfig: enable the clock driver for Qualcomm SA8775P platforms Bartosz Golaszewski
2023-01-09 17:59 ` Konrad Dybcio
2023-01-09 17:44 ` [PATCH 04/18] dt-bindings: clock: qcom-rpmhcc: document the clock for sa8775p Bartosz Golaszewski
2023-01-09 18:16 ` Krzysztof Kozlowski
2023-01-09 17:44 ` [PATCH 05/18] clk: qcom: rpmh: add clocks " Bartosz Golaszewski
2023-01-09 18:01 ` Konrad Dybcio
2023-01-09 17:44 ` [PATCH 06/18] dt-bindings: interconnect: qcom: document the interconnects " Bartosz Golaszewski
2023-01-09 18:19 ` Krzysztof Kozlowski
2023-01-09 17:45 ` [PATCH 07/18] interconnect: qcom: add a driver " Bartosz Golaszewski
2023-01-09 18:03 ` Konrad Dybcio
2023-01-09 18:22 ` Krzysztof Kozlowski
2023-01-09 17:45 ` [PATCH 08/18] arm64: defconfig: enable the interconnect driver for Qualcomm SA8775P Bartosz Golaszewski
2023-01-09 18:04 ` Konrad Dybcio
2023-01-09 17:45 ` [PATCH 09/18] dt-bindings: pinctrl: sa8775p: add bindings for qcom,sa8775p-tlmm Bartosz Golaszewski
2023-01-09 18:09 ` Krzysztof Kozlowski
2023-01-10 16:22 ` Bjorn Andersson
2023-01-09 17:45 ` [PATCH 10/18] pinctrl: qcom: sa8775p: add the pinctrl driver for the sa8775p platform Bartosz Golaszewski
2023-01-09 18:07 ` Konrad Dybcio
2023-01-10 8:18 ` Linus Walleij
2023-01-10 16:26 ` Bjorn Andersson
2023-01-19 8:43 ` Bartosz Golaszewski
2023-01-09 17:45 ` [PATCH 11/18] arm64: defconfig: enable the pinctrl driver for Qualcomm SA8775P platforms Bartosz Golaszewski
2023-01-09 18:08 ` Konrad Dybcio
2023-01-09 18:11 ` Krzysztof Kozlowski
2023-01-09 17:45 ` [PATCH 12/18] dt-bindings: mailbox: qcom-ipcc: document the sa8775p platform Bartosz Golaszewski
2023-01-09 18:22 ` Krzysztof Kozlowski
2023-01-09 17:45 ` [PATCH 13/18] dt-bindings: power: qcom,rpmpd: document sa8775p Bartosz Golaszewski
2023-01-09 18:23 ` Krzysztof Kozlowski
2023-01-09 17:45 ` [PATCH 14/18] soc: qcom: rmphpd: add power domains for sa8775p Bartosz Golaszewski
2023-01-09 18:08 ` Konrad Dybcio
2023-01-09 20:10 ` Dmitry Baryshkov
2023-01-09 17:45 ` [PATCH 15/18] dt-bindings: arm-smmu: document the smmu on Qualcomm SA8775P Bartosz Golaszewski
2023-01-09 18:24 ` Krzysztof Kozlowski
2023-01-09 17:45 ` [PATCH 16/18] iommu: arm-smmu: qcom: add support for sa8775p Bartosz Golaszewski
2023-01-09 18:10 ` Konrad Dybcio
2023-01-09 18:41 ` Krzysztof Kozlowski
2023-01-09 17:45 ` [PATCH 17/18] dt-bindings: arm: qcom: document the sa8775p reference board Bartosz Golaszewski
2023-01-09 18:26 ` Krzysztof Kozlowski
2023-01-09 17:45 ` [PATCH 18/18] arm64: dts: qcom: add initial support for qcom sa8775p-ride Bartosz Golaszewski
2023-01-09 18:29 ` Konrad Dybcio
2023-01-09 18:34 ` Krzysztof Kozlowski
2023-01-13 16:58 ` Prasad Sodagudi
2023-01-26 20:35 ` Eric Chanudet
2023-01-09 20:13 ` [PATCH 00/18] arm64: qcom: add support for sa8775p-ride Dmitry Baryshkov
2023-01-09 20:59 ` Konrad Dybcio
2023-01-09 21:03 ` Dmitry Baryshkov
2023-01-10 17:17 ` (subset) " Bjorn Andersson
2023-01-19 2:16 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230109174511.1740856-2-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=bartosz.golaszewski@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=djakov@kernel.org \
--cc=elder@kernel.org \
--cc=iommu@lists.linux.dev \
--cc=jassisinghbrar@gmail.com \
--cc=joro@8bytes.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mani@kernel.org \
--cc=mturquette@baylibre.com \
--cc=netdev@vger.kernel.org \
--cc=richardcochran@gmail.com \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=sboyd@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=vkoul@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).