netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
@ 2013-01-17 22:18 Peter Korsgaard
       [not found] ` <1358461134-13452-1-git-send-email-jacmet-OfajU3CKLf1/SzgSGea1oA@public.gmane.org>
  0 siblings, 1 reply; 10+ messages in thread
From: Peter Korsgaard @ 2013-01-17 22:18 UTC (permalink / raw)
  To: linux-omap, netdev, devicetree-discuss, mugunthanvnm, hvaibhav,
	richardcochran, tony, michal.bachraty
  Cc: Peter Korsgaard

When booting with CONFIG_ARM_APPENDED_DTB (either because of using an old
U-Boot, not wanting the hassle of 2 files or when using Falcon fast boot
mode in U-Boot), nothing updates the ethernet hwaddr specified for the
CPSW slaves, causing the driver to use a random hwaddr, which is some times
troublesome.

The am33xx has unique ethernet hwaddrs programmed in the efuse, so it makes
more sense to default to these rather than random ones. Add a fixup step
which adds mac-address dt properties using the efuse addresses if the DTB
didn't contain valid ones.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
Changes since v1:
- Use omap_arch_initcall as pointed out by Tony

 arch/arm/mach-omap2/Makefile      |    3 ++
 arch/arm/mach-omap2/am33xx-cpsw.c |   94 +++++++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/control.h     |    4 ++
 3 files changed, 101 insertions(+)
 create mode 100644 arch/arm/mach-omap2/am33xx-cpsw.c

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 65fb6fb..54fb2ee 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -298,4 +298,7 @@ endif
 emac-$(CONFIG_TI_DAVINCI_EMAC)		:= am35xx-emac.o
 obj-y					+= $(emac-m) $(emac-y)
 
+cpsw-$(CONFIG_TI_CPSW)			:= am33xx-cpsw.o
+obj-y					+= $(cpsw-m) $(cpsw-y)
+
 obj-y					+= common-board-devices.o twl-common.o dss-common.o
diff --git a/arch/arm/mach-omap2/am33xx-cpsw.c b/arch/arm/mach-omap2/am33xx-cpsw.c
new file mode 100644
index 0000000..eec29a4
--- /dev/null
+++ b/arch/arm/mach-omap2/am33xx-cpsw.c
@@ -0,0 +1,94 @@
+/*
+ * am335x specific cpsw dt fixups
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/etherdevice.h>
+#include <linux/of.h>
+#include <linux/of_net.h>
+
+#include "soc.h"
+#include "control.h"
+
+/**
+ * am33xx_dt_cpsw_set_mac_from_efuse - Add mac-address property using
+ * ethernet hwaddr from efuse
+ * @np:		Pointer to the cpsw slave to set mac address of
+ * @idx:	Mac address index to use from efuse
+ */
+static void am33xx_dt_cpsw_set_mac_from_efuse(struct device_node *np, int idx)
+{
+	struct property *prop;
+	u32 lo, hi;
+	u8 *mac;
+
+	switch (idx) {
+	case 0:
+		lo = omap_ctrl_readl(AM33XX_CONTROL_MAC_ID0_LOW);
+		hi = omap_ctrl_readl(AM33XX_CONTROL_MAC_ID0_HIGH);
+		break;
+
+	case 1:
+		lo = omap_ctrl_readl(AM33XX_CONTROL_MAC_ID1_LOW);
+		hi = omap_ctrl_readl(AM33XX_CONTROL_MAC_ID1_HIGH);
+		break;
+
+	default:
+		pr_err("cpsw.%d: too many slaves found\n", idx);
+		return;
+	}
+
+	prop = kzalloc(sizeof(*prop) + ETH_ALEN, GFP_KERNEL);
+	if (!prop)
+		return;
+
+	prop->value = prop + 1;
+	prop->length = ETH_ALEN;
+	prop->name = kstrdup("mac-address", GFP_KERNEL);
+	if (!prop->name) {
+		kfree(prop);
+		return;
+	}
+
+	mac = prop->value;
+
+	mac[0] = hi;
+	mac[1] = hi >> 8;
+	mac[2] = hi >> 16;
+	mac[3] = hi >> 24;
+	mac[4] = lo;
+	mac[5] = lo >> 8;
+
+	of_update_property(np, prop);
+
+	pr_info("cpsw.%d: No hwaddr in dt. Using %pM from efuse\n", idx, mac);
+}
+
+static int __init am33xx_dt_cpsw_mac_fixup(void)
+{
+	struct device_node *np, *slave;
+	int idx = 0;
+
+	if (!soc_is_am33xx())
+		return -ENODEV;
+
+	for_each_compatible_node(np, NULL, "ti,cpsw")
+		for_each_node_by_name(slave, "slave") {
+			if (!of_get_mac_address(slave))
+				am33xx_dt_cpsw_set_mac_from_efuse(slave, idx);
+			idx++;
+		}
+
+	return 0;
+}
+omap_arch_initcall(am33xx_dt_cpsw_mac_fixup);
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index e6c3281..266d512 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -352,6 +352,10 @@
 /* AM33XX CONTROL_STATUS register */
 #define AM33XX_CONTROL_STATUS		0x040
 #define AM33XX_CONTROL_SEC_CLK_CTRL	0x1bc
+#define AM33XX_CONTROL_MAC_ID0_LOW	0x630
+#define AM33XX_CONTROL_MAC_ID0_HIGH	0x634
+#define AM33XX_CONTROL_MAC_ID1_LOW	0x638
+#define AM33XX_CONTROL_MAC_ID1_HIGH	0x63c
 
 /* AM33XX CONTROL_STATUS bitfields (partial) */
 #define AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT		22
-- 
1.7.10.4


^ permalink raw reply related	[flat|nested] 10+ messages in thread

* Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
       [not found] ` <1358461134-13452-1-git-send-email-jacmet-OfajU3CKLf1/SzgSGea1oA@public.gmane.org>
@ 2013-01-18  5:14   ` Mugunthan V N
       [not found]     ` <50F8DA3A.3090406-l0cyMroinI0@public.gmane.org>
  2013-07-08 12:42     ` Mark Jackson
  0 siblings, 2 replies; 10+ messages in thread
From: Mugunthan V N @ 2013-01-18  5:14 UTC (permalink / raw)
  To: Peter Korsgaard
  Cc: michal.bachraty-Re5JQEeQqe8AvxtiuMwx3w,
	michal.bachraty-6oiIBCxl0MMjD8S081q9vkEOCMrvLtNR,
	netdev-u79uwXL29TY76Z2rM5mHXA,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-omap-u79uwXL29TY76Z2rM5mHXA,
	richardcochran-Re5JQEeQqe8AvxtiuMwx3w

On 1/18/2013 3:48 AM, Peter Korsgaard wrote:
> When booting with CONFIG_ARM_APPENDED_DTB (either because of using an old
> U-Boot, not wanting the hassle of 2 files or when using Falcon fast boot
> mode in U-Boot), nothing updates the ethernet hwaddr specified for the
> CPSW slaves, causing the driver to use a random hwaddr, which is some times
> troublesome.
>
> The am33xx has unique ethernet hwaddrs programmed in the efuse, so it makes
> more sense to default to these rather than random ones. Add a fixup step
> which adds mac-address dt properties using the efuse addresses if the DTB
> didn't contain valid ones.
>
> Signed-off-by: Peter Korsgaard <jacmet-OfajU3CKLf1/SzgSGea1oA@public.gmane.org>
>

This implementation looks fine.
Acked-by: Mugunthan V N <mugunthanvnm-l0cyMroinI0@public.gmane.org>

Regards
Mugunthan V N

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
       [not found]     ` <50F8DA3A.3090406-l0cyMroinI0@public.gmane.org>
@ 2013-01-18  8:26       ` Michal Bachraty
  0 siblings, 0 replies; 10+ messages in thread
From: Michal Bachraty @ 2013-01-18  8:26 UTC (permalink / raw)
  To: Mugunthan V N
  Cc: michal.bachraty-6oiIBCxl0MMjD8S081q9vkEOCMrvLtNR,
	netdev-u79uwXL29TY76Z2rM5mHXA,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-omap-u79uwXL29TY76Z2rM5mHXA,
	richardcochran-Re5JQEeQqe8AvxtiuMwx3w


[-- Attachment #1.1: Type: text/plain, Size: 1641 bytes --]

On Fri, Jan 18, 2013 at 6:14 AM, Mugunthan V N <mugunthanvnm-l0cyMroinI0@public.gmane.org> wrote:

> On 1/18/2013 3:48 AM, Peter Korsgaard wrote:
>
>> When booting with CONFIG_ARM_APPENDED_DTB (either because of using an old
>> U-Boot, not wanting the hassle of 2 files or when using Falcon fast boot
>> mode in U-Boot), nothing updates the ethernet hwaddr specified for the
>> CPSW slaves, causing the driver to use a random hwaddr, which is some
>> times
>> troublesome.
>>
>> The am33xx has unique ethernet hwaddrs programmed in the efuse, so it
>> makes
>> more sense to default to these rather than random ones. Add a fixup step
>> which adds mac-address dt properties using the efuse addresses if the DTB
>> didn't contain valid ones.
>>
>> Signed-off-by: Peter Korsgaard <jacmet-OfajU3CKLf1/SzgSGea1oA@public.gmane.org>
>>
>>
> This implementation looks fine.
> Acked-by: Mugunthan V N <mugunthanvnm-l0cyMroinI0@public.gmane.org>
>
> Regards
> Mugunthan V N
>

Thanks,
My approach for cpsw driver is posted here:
https://patchwork.kernel.org/patch/1966481/
I added DT option mac-address-source because there is still possiblility to
have mac address set by the u-boot in the future. Beaglebone have special
eeprom on board, were you can have stored user MAC and u-boot can read
eeprom
data. Maybe some users will want this feature.  Also in cpsw dt binding
documentation, there is mention  /* Filled in by U-Boot */.  For that
purpose,
code I proposed can easily deal with any driver exteds.

Reading CPU mac address registers with (my approach) or without (your
approach) DT should be more discussed. Also your way seems to be fine.

[-- Attachment #1.2: Type: text/html, Size: 2435 bytes --]

[-- Attachment #2: Type: text/plain, Size: 192 bytes --]

_______________________________________________
devicetree-discuss mailing list
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
https://lists.ozlabs.org/listinfo/devicetree-discuss

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
  2013-01-18  5:14   ` Mugunthan V N
       [not found]     ` <50F8DA3A.3090406-l0cyMroinI0@public.gmane.org>
@ 2013-07-08 12:42     ` Mark Jackson
  2013-07-12 14:33       ` Mark Jackson
  2013-09-05 20:11       ` Koen Kooi
  1 sibling, 2 replies; 10+ messages in thread
From: Mark Jackson @ 2013-07-08 12:42 UTC (permalink / raw)
  To: Mugunthan V N
  Cc: Peter Korsgaard, linux-omap, netdev, devicetree-discuss,
	hvaibhav, richardcochran, tony, michal.bachraty, michal.bachraty

On 18/01/13 05:14, Mugunthan V N wrote:
> On 1/18/2013 3:48 AM, Peter Korsgaard wrote:
>> When booting with CONFIG_ARM_APPENDED_DTB (either because of using an old
>> U-Boot, not wanting the hassle of 2 files or when using Falcon fast boot
>> mode in U-Boot), nothing updates the ethernet hwaddr specified for the
>> CPSW slaves, causing the driver to use a random hwaddr, which is some times
>> troublesome.
>>
>> The am33xx has unique ethernet hwaddrs programmed in the efuse, so it makes
>> more sense to default to these rather than random ones. Add a fixup step
>> which adds mac-address dt properties using the efuse addresses if the DTB
>> didn't contain valid ones.
>>
>> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
>>
> 
> This implementation looks fine.
> Acked-by: Mugunthan V N <mugunthanvnm@ti.com>

Tested-by: Mark Jackson <mpfj-list@newflow.co.uk>


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
  2013-07-08 12:42     ` Mark Jackson
@ 2013-07-12 14:33       ` Mark Jackson
  2013-07-15  5:31         ` Peter Korsgaard
  2013-09-05 20:11       ` Koen Kooi
  1 sibling, 1 reply; 10+ messages in thread
From: Mark Jackson @ 2013-07-12 14:33 UTC (permalink / raw)
  To: Mugunthan V N
  Cc: Peter Korsgaard, linux-omap, netdev, devicetree-discuss,
	hvaibhav, richardcochran, tony, michal.bachraty, michal.bachraty

On 08/07/13 13:42, Mark Jackson wrote:
> On 18/01/13 05:14, Mugunthan V N wrote:
>> On 1/18/2013 3:48 AM, Peter Korsgaard wrote:
>>> When booting with CONFIG_ARM_APPENDED_DTB (either because of using an old
>>> U-Boot, not wanting the hassle of 2 files or when using Falcon fast boot
>>> mode in U-Boot), nothing updates the ethernet hwaddr specified for the
>>> CPSW slaves, causing the driver to use a random hwaddr, which is some times
>>> troublesome.
>>>
>>> The am33xx has unique ethernet hwaddrs programmed in the efuse, so it makes
>>> more sense to default to these rather than random ones. Add a fixup step
>>> which adds mac-address dt properties using the efuse addresses if the DTB
>>> didn't contain valid ones.
>>>
>>> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
>>>
>>
>> This implementation looks fine.
>> Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
> 
> Tested-by: Mark Jackson <mpfj-list@newflow.co.uk>

Is this ever going to be put into the mainline code ?

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
  2013-07-12 14:33       ` Mark Jackson
@ 2013-07-15  5:31         ` Peter Korsgaard
  2013-09-05 20:16           ` Matt Porter
  0 siblings, 1 reply; 10+ messages in thread
From: Peter Korsgaard @ 2013-07-15  5:31 UTC (permalink / raw)
  To: Mark Jackson, tony
  Cc: Mugunthan V N, linux-omap, netdev, devicetree-discuss, hvaibhav,
	richardcochran, tony, michal.bachraty, michal.bachraty

>>>>> "Mark" == Mark Jackson <mpfj-list@newflow.co.uk> writes:

Hi,

 Mark> On 08/07/13 13:42, Mark Jackson wrote:
 >> On 18/01/13 05:14, Mugunthan V N wrote:
 >>> On 1/18/2013 3:48 AM, Peter Korsgaard wrote:
 >>>> When booting with CONFIG_ARM_APPENDED_DTB (either because of using an old
 >>>> U-Boot, not wanting the hassle of 2 files or when using Falcon fast boot
 >>>> mode in U-Boot), nothing updates the ethernet hwaddr specified for the
 >>>> CPSW slaves, causing the driver to use a random hwaddr, which is some times
 >>>> troublesome.
 >>>> 
 >>>> The am33xx has unique ethernet hwaddrs programmed in the efuse, so it makes
 >>>> more sense to default to these rather than random ones. Add a fixup step
 >>>> which adds mac-address dt properties using the efuse addresses if the DTB
 >>>> didn't contain valid ones.
 >>>> 
 >>>> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
 >>> 
 >>> This implementation looks fine.
 >>> Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
 >> 
 >> Tested-by: Mark Jackson <mpfj-list@newflow.co.uk>

 Mark> Is this ever going to be put into the mainline code ?

Good question. Tony, could you please pick this up? It has been pending
since January and has a number of acks.

Do you want me to resend?

-- 
Bye, Peter Korsgaard

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
  2013-07-08 12:42     ` Mark Jackson
  2013-07-12 14:33       ` Mark Jackson
@ 2013-09-05 20:11       ` Koen Kooi
  1 sibling, 0 replies; 10+ messages in thread
From: Koen Kooi @ 2013-09-05 20:11 UTC (permalink / raw)
  To: Mark Jackson
  Cc: Mugunthan V N, Peter Korsgaard, linux-omap, netdev,
	devicetree-discuss, hvaibhav, richardcochran, tony,
	michal.bachraty, michal.bachraty


Op 8 jul. 2013, om 14:42 heeft Mark Jackson <mpfj-list@newflow.co.uk> het volgende geschreven:

> On 18/01/13 05:14, Mugunthan V N wrote:
>> On 1/18/2013 3:48 AM, Peter Korsgaard wrote:
>>> When booting with CONFIG_ARM_APPENDED_DTB (either because of using an old
>>> U-Boot, not wanting the hassle of 2 files or when using Falcon fast boot
>>> mode in U-Boot), nothing updates the ethernet hwaddr specified for the
>>> CPSW slaves, causing the driver to use a random hwaddr, which is some times
>>> troublesome.
>>> 
>>> The am33xx has unique ethernet hwaddrs programmed in the efuse, so it makes
>>> more sense to default to these rather than random ones. Add a fixup step
>>> which adds mac-address dt properties using the efuse addresses if the DTB
>>> didn't contain valid ones.
>>> 
>>> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
>>> 
>> 
>> This implementation looks fine.
>> Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
> 
> Tested-by: Mark Jackson <mpfj-list@newflow.co.uk>

Tested-by: Koen Kooi <koen@dominion.thruhere.net>




^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
  2013-07-15  5:31         ` Peter Korsgaard
@ 2013-09-05 20:16           ` Matt Porter
  2013-09-05 20:22             ` Olof Johansson
  0 siblings, 1 reply; 10+ messages in thread
From: Matt Porter @ 2013-09-05 20:16 UTC (permalink / raw)
  To: Peter Korsgaard
  Cc: Mark Jackson, tony, Mugunthan V N, linux-omap, netdev,
	devicetree-discuss, hvaibhav, richardcochran, Olof Johansson,
	Kevin Hilman, michal.bachraty, michal.bachraty

On Mon, Jul 15, 2013 at 07:31:18AM +0200, Peter Korsgaard wrote:
> >>>>> "Mark" == Mark Jackson <mpfj-list@newflow.co.uk> writes:
> 
> Hi,
> 
>  Mark> On 08/07/13 13:42, Mark Jackson wrote:
>  >> On 18/01/13 05:14, Mugunthan V N wrote:
>  >>> On 1/18/2013 3:48 AM, Peter Korsgaard wrote:
>  >>>> When booting with CONFIG_ARM_APPENDED_DTB (either because of using an old
>  >>>> U-Boot, not wanting the hassle of 2 files or when using Falcon fast boot
>  >>>> mode in U-Boot), nothing updates the ethernet hwaddr specified for the
>  >>>> CPSW slaves, causing the driver to use a random hwaddr, which is some times
>  >>>> troublesome.
>  >>>> 
>  >>>> The am33xx has unique ethernet hwaddrs programmed in the efuse, so it makes
>  >>>> more sense to default to these rather than random ones. Add a fixup step
>  >>>> which adds mac-address dt properties using the efuse addresses if the DTB
>  >>>> didn't contain valid ones.
>  >>>> 
>  >>>> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
>  >>> 
>  >>> This implementation looks fine.
>  >>> Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
>  >> 
>  >> Tested-by: Mark Jackson <mpfj-list@newflow.co.uk>
> 
>  Mark> Is this ever going to be put into the mainline code ?
> 
> Good question. Tony, could you please pick this up? It has been pending
> since January and has a number of acks.
> 
> Do you want me to resend?

Also working nicely here on 3.11.

Tested-by: Matt Porter <matt.porter@linaro.org>

Kevin or Olof: can you apply? Seems to be continuing no response after
Ack back in January.

-Matt

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
  2013-09-05 20:16           ` Matt Porter
@ 2013-09-05 20:22             ` Olof Johansson
  2013-09-05 21:08               ` Peter Korsgaard
  0 siblings, 1 reply; 10+ messages in thread
From: Olof Johansson @ 2013-09-05 20:22 UTC (permalink / raw)
  To: Matt Porter
  Cc: Peter Korsgaard, Mark Jackson, Tony Lindgren, Mugunthan V N,
	linux-omap, Network Development, devicetree-discuss, hvaibhav,
	Richard Cochran, Kevin Hilman, michal.bachraty, michal.bachraty

On Thu, Sep 5, 2013 at 1:16 PM, Matt Porter <matt.porter@linaro.org> wrote:
> On Mon, Jul 15, 2013 at 07:31:18AM +0200, Peter Korsgaard wrote:
>> >>>>> "Mark" == Mark Jackson <mpfj-list@newflow.co.uk> writes:
>>
>> Hi,
>>
>>  Mark> On 08/07/13 13:42, Mark Jackson wrote:
>>  >> On 18/01/13 05:14, Mugunthan V N wrote:
>>  >>> On 1/18/2013 3:48 AM, Peter Korsgaard wrote:
>>  >>>> When booting with CONFIG_ARM_APPENDED_DTB (either because of using an old
>>  >>>> U-Boot, not wanting the hassle of 2 files or when using Falcon fast boot
>>  >>>> mode in U-Boot), nothing updates the ethernet hwaddr specified for the
>>  >>>> CPSW slaves, causing the driver to use a random hwaddr, which is some times
>>  >>>> troublesome.
>>  >>>>
>>  >>>> The am33xx has unique ethernet hwaddrs programmed in the efuse, so it makes
>>  >>>> more sense to default to these rather than random ones. Add a fixup step
>>  >>>> which adds mac-address dt properties using the efuse addresses if the DTB
>>  >>>> didn't contain valid ones.
>>  >>>>
>>  >>>> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
>>  >>>
>>  >>> This implementation looks fine.
>>  >>> Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
>>  >>
>>  >> Tested-by: Mark Jackson <mpfj-list@newflow.co.uk>
>>
>>  Mark> Is this ever going to be put into the mainline code ?
>>
>> Good question. Tony, could you please pick this up? It has been pending
>> since January and has a number of acks.
>>
>> Do you want me to resend?
>
> Also working nicely here on 3.11.
>
> Tested-by: Matt Porter <matt.porter@linaro.org>
>
> Kevin or Olof: can you apply? Seems to be continuing no response after
> Ack back in January.

I have no idea what the patch is, it's no longer in the email. Can you
resend it, please?


-Olof

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt
  2013-09-05 20:22             ` Olof Johansson
@ 2013-09-05 21:08               ` Peter Korsgaard
  0 siblings, 0 replies; 10+ messages in thread
From: Peter Korsgaard @ 2013-09-05 21:08 UTC (permalink / raw)
  To: Olof Johansson
  Cc: Matt Porter, Mark Jackson, Tony Lindgren, Mugunthan V N,
	linux-omap, Network Development, devicetree-discuss, hvaibhav,
	Richard Cochran, Kevin Hilman, michal.bachraty, michal.bachraty

>>>>> "Olof" == Olof Johansson <olof@lixom.net> writes:

 >> Tested-by: Matt Porter <matt.porter@linaro.org>
 >> 
 >> Kevin or Olof: can you apply? Seems to be continuing no response after
 >> Ack back in January.

 Olof> I have no idea what the patch is, it's no longer in the email. Can you
 Olof> resend it, please?

Sure, one moment.

-- 
Bye, Peter Korsgaard

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2013-09-05 21:08 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-01-17 22:18 [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt Peter Korsgaard
     [not found] ` <1358461134-13452-1-git-send-email-jacmet-OfajU3CKLf1/SzgSGea1oA@public.gmane.org>
2013-01-18  5:14   ` Mugunthan V N
     [not found]     ` <50F8DA3A.3090406-l0cyMroinI0@public.gmane.org>
2013-01-18  8:26       ` Michal Bachraty
2013-07-08 12:42     ` Mark Jackson
2013-07-12 14:33       ` Mark Jackson
2013-07-15  5:31         ` Peter Korsgaard
2013-09-05 20:16           ` Matt Porter
2013-09-05 20:22             ` Olof Johansson
2013-09-05 21:08               ` Peter Korsgaard
2013-09-05 20:11       ` Koen Kooi

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).