* [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt @ 2013-01-17 22:18 Peter Korsgaard [not found] ` <1358461134-13452-1-git-send-email-jacmet-OfajU3CKLf1/SzgSGea1oA@public.gmane.org> 0 siblings, 1 reply; 10+ messages in thread From: Peter Korsgaard @ 2013-01-17 22:18 UTC (permalink / raw) To: linux-omap, netdev, devicetree-discuss, mugunthanvnm, hvaibhav, richardcochran, tony, michal.bachraty Cc: Peter Korsgaard When booting with CONFIG_ARM_APPENDED_DTB (either because of using an old U-Boot, not wanting the hassle of 2 files or when using Falcon fast boot mode in U-Boot), nothing updates the ethernet hwaddr specified for the CPSW slaves, causing the driver to use a random hwaddr, which is some times troublesome. The am33xx has unique ethernet hwaddrs programmed in the efuse, so it makes more sense to default to these rather than random ones. Add a fixup step which adds mac-address dt properties using the efuse addresses if the DTB didn't contain valid ones. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> --- Changes since v1: - Use omap_arch_initcall as pointed out by Tony arch/arm/mach-omap2/Makefile | 3 ++ arch/arm/mach-omap2/am33xx-cpsw.c | 94 +++++++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/control.h | 4 ++ 3 files changed, 101 insertions(+) create mode 100644 arch/arm/mach-omap2/am33xx-cpsw.c diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 65fb6fb..54fb2ee 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -298,4 +298,7 @@ endif emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o obj-y += $(emac-m) $(emac-y) +cpsw-$(CONFIG_TI_CPSW) := am33xx-cpsw.o +obj-y += $(cpsw-m) $(cpsw-y) + obj-y += common-board-devices.o twl-common.o dss-common.o diff --git a/arch/arm/mach-omap2/am33xx-cpsw.c b/arch/arm/mach-omap2/am33xx-cpsw.c new file mode 100644 index 0000000..eec29a4 --- /dev/null +++ b/arch/arm/mach-omap2/am33xx-cpsw.c @@ -0,0 +1,94 @@ +/* + * am335x specific cpsw dt fixups + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/etherdevice.h> +#include <linux/of.h> +#include <linux/of_net.h> + +#include "soc.h" +#include "control.h" + +/** + * am33xx_dt_cpsw_set_mac_from_efuse - Add mac-address property using + * ethernet hwaddr from efuse + * @np: Pointer to the cpsw slave to set mac address of + * @idx: Mac address index to use from efuse + */ +static void am33xx_dt_cpsw_set_mac_from_efuse(struct device_node *np, int idx) +{ + struct property *prop; + u32 lo, hi; + u8 *mac; + + switch (idx) { + case 0: + lo = omap_ctrl_readl(AM33XX_CONTROL_MAC_ID0_LOW); + hi = omap_ctrl_readl(AM33XX_CONTROL_MAC_ID0_HIGH); + break; + + case 1: + lo = omap_ctrl_readl(AM33XX_CONTROL_MAC_ID1_LOW); + hi = omap_ctrl_readl(AM33XX_CONTROL_MAC_ID1_HIGH); + break; + + default: + pr_err("cpsw.%d: too many slaves found\n", idx); + return; + } + + prop = kzalloc(sizeof(*prop) + ETH_ALEN, GFP_KERNEL); + if (!prop) + return; + + prop->value = prop + 1; + prop->length = ETH_ALEN; + prop->name = kstrdup("mac-address", GFP_KERNEL); + if (!prop->name) { + kfree(prop); + return; + } + + mac = prop->value; + + mac[0] = hi; + mac[1] = hi >> 8; + mac[2] = hi >> 16; + mac[3] = hi >> 24; + mac[4] = lo; + mac[5] = lo >> 8; + + of_update_property(np, prop); + + pr_info("cpsw.%d: No hwaddr in dt. Using %pM from efuse\n", idx, mac); +} + +static int __init am33xx_dt_cpsw_mac_fixup(void) +{ + struct device_node *np, *slave; + int idx = 0; + + if (!soc_is_am33xx()) + return -ENODEV; + + for_each_compatible_node(np, NULL, "ti,cpsw") + for_each_node_by_name(slave, "slave") { + if (!of_get_mac_address(slave)) + am33xx_dt_cpsw_set_mac_from_efuse(slave, idx); + idx++; + } + + return 0; +} +omap_arch_initcall(am33xx_dt_cpsw_mac_fixup); diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index e6c3281..266d512 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -352,6 +352,10 @@ /* AM33XX CONTROL_STATUS register */ #define AM33XX_CONTROL_STATUS 0x040 #define AM33XX_CONTROL_SEC_CLK_CTRL 0x1bc +#define AM33XX_CONTROL_MAC_ID0_LOW 0x630 +#define AM33XX_CONTROL_MAC_ID0_HIGH 0x634 +#define AM33XX_CONTROL_MAC_ID1_LOW 0x638 +#define AM33XX_CONTROL_MAC_ID1_HIGH 0x63c /* AM33XX CONTROL_STATUS bitfields (partial) */ #define AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT 22 -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 10+ messages in thread
[parent not found: <1358461134-13452-1-git-send-email-jacmet-OfajU3CKLf1/SzgSGea1oA@public.gmane.org>]
* Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt [not found] ` <1358461134-13452-1-git-send-email-jacmet-OfajU3CKLf1/SzgSGea1oA@public.gmane.org> @ 2013-01-18 5:14 ` Mugunthan V N [not found] ` <50F8DA3A.3090406-l0cyMroinI0@public.gmane.org> 2013-07-08 12:42 ` Mark Jackson 0 siblings, 2 replies; 10+ messages in thread From: Mugunthan V N @ 2013-01-18 5:14 UTC (permalink / raw) To: Peter Korsgaard Cc: michal.bachraty-Re5JQEeQqe8AvxtiuMwx3w, michal.bachraty-6oiIBCxl0MMjD8S081q9vkEOCMrvLtNR, netdev-u79uwXL29TY76Z2rM5mHXA, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, linux-omap-u79uwXL29TY76Z2rM5mHXA, richardcochran-Re5JQEeQqe8AvxtiuMwx3w On 1/18/2013 3:48 AM, Peter Korsgaard wrote: > When booting with CONFIG_ARM_APPENDED_DTB (either because of using an old > U-Boot, not wanting the hassle of 2 files or when using Falcon fast boot > mode in U-Boot), nothing updates the ethernet hwaddr specified for the > CPSW slaves, causing the driver to use a random hwaddr, which is some times > troublesome. > > The am33xx has unique ethernet hwaddrs programmed in the efuse, so it makes > more sense to default to these rather than random ones. Add a fixup step > which adds mac-address dt properties using the efuse addresses if the DTB > didn't contain valid ones. > > Signed-off-by: Peter Korsgaard <jacmet-OfajU3CKLf1/SzgSGea1oA@public.gmane.org> > This implementation looks fine. Acked-by: Mugunthan V N <mugunthanvnm-l0cyMroinI0@public.gmane.org> Regards Mugunthan V N ^ permalink raw reply [flat|nested] 10+ messages in thread
[parent not found: <50F8DA3A.3090406-l0cyMroinI0@public.gmane.org>]
* Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt [not found] ` <50F8DA3A.3090406-l0cyMroinI0@public.gmane.org> @ 2013-01-18 8:26 ` Michal Bachraty 0 siblings, 0 replies; 10+ messages in thread From: Michal Bachraty @ 2013-01-18 8:26 UTC (permalink / raw) To: Mugunthan V N Cc: michal.bachraty-6oiIBCxl0MMjD8S081q9vkEOCMrvLtNR, netdev-u79uwXL29TY76Z2rM5mHXA, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, linux-omap-u79uwXL29TY76Z2rM5mHXA, richardcochran-Re5JQEeQqe8AvxtiuMwx3w [-- Attachment #1.1: Type: text/plain, Size: 1641 bytes --] On Fri, Jan 18, 2013 at 6:14 AM, Mugunthan V N <mugunthanvnm-l0cyMroinI0@public.gmane.org> wrote: > On 1/18/2013 3:48 AM, Peter Korsgaard wrote: > >> When booting with CONFIG_ARM_APPENDED_DTB (either because of using an old >> U-Boot, not wanting the hassle of 2 files or when using Falcon fast boot >> mode in U-Boot), nothing updates the ethernet hwaddr specified for the >> CPSW slaves, causing the driver to use a random hwaddr, which is some >> times >> troublesome. >> >> The am33xx has unique ethernet hwaddrs programmed in the efuse, so it >> makes >> more sense to default to these rather than random ones. Add a fixup step >> which adds mac-address dt properties using the efuse addresses if the DTB >> didn't contain valid ones. >> >> Signed-off-by: Peter Korsgaard <jacmet-OfajU3CKLf1/SzgSGea1oA@public.gmane.org> >> >> > This implementation looks fine. > Acked-by: Mugunthan V N <mugunthanvnm-l0cyMroinI0@public.gmane.org> > > Regards > Mugunthan V N > Thanks, My approach for cpsw driver is posted here: https://patchwork.kernel.org/patch/1966481/ I added DT option mac-address-source because there is still possiblility to have mac address set by the u-boot in the future. Beaglebone have special eeprom on board, were you can have stored user MAC and u-boot can read eeprom data. Maybe some users will want this feature. Also in cpsw dt binding documentation, there is mention /* Filled in by U-Boot */. For that purpose, code I proposed can easily deal with any driver exteds. Reading CPU mac address registers with (my approach) or without (your approach) DT should be more discussed. Also your way seems to be fine. [-- Attachment #1.2: Type: text/html, Size: 2435 bytes --] [-- Attachment #2: Type: text/plain, Size: 192 bytes --] _______________________________________________ devicetree-discuss mailing list devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org https://lists.ozlabs.org/listinfo/devicetree-discuss ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt 2013-01-18 5:14 ` Mugunthan V N [not found] ` <50F8DA3A.3090406-l0cyMroinI0@public.gmane.org> @ 2013-07-08 12:42 ` Mark Jackson 2013-07-12 14:33 ` Mark Jackson 2013-09-05 20:11 ` Koen Kooi 1 sibling, 2 replies; 10+ messages in thread From: Mark Jackson @ 2013-07-08 12:42 UTC (permalink / raw) To: Mugunthan V N Cc: Peter Korsgaard, linux-omap, netdev, devicetree-discuss, hvaibhav, richardcochran, tony, michal.bachraty, michal.bachraty On 18/01/13 05:14, Mugunthan V N wrote: > On 1/18/2013 3:48 AM, Peter Korsgaard wrote: >> When booting with CONFIG_ARM_APPENDED_DTB (either because of using an old >> U-Boot, not wanting the hassle of 2 files or when using Falcon fast boot >> mode in U-Boot), nothing updates the ethernet hwaddr specified for the >> CPSW slaves, causing the driver to use a random hwaddr, which is some times >> troublesome. >> >> The am33xx has unique ethernet hwaddrs programmed in the efuse, so it makes >> more sense to default to these rather than random ones. Add a fixup step >> which adds mac-address dt properties using the efuse addresses if the DTB >> didn't contain valid ones. >> >> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> >> > > This implementation looks fine. > Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Tested-by: Mark Jackson <mpfj-list@newflow.co.uk> ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt 2013-07-08 12:42 ` Mark Jackson @ 2013-07-12 14:33 ` Mark Jackson 2013-07-15 5:31 ` Peter Korsgaard 2013-09-05 20:11 ` Koen Kooi 1 sibling, 1 reply; 10+ messages in thread From: Mark Jackson @ 2013-07-12 14:33 UTC (permalink / raw) To: Mugunthan V N Cc: Peter Korsgaard, linux-omap, netdev, devicetree-discuss, hvaibhav, richardcochran, tony, michal.bachraty, michal.bachraty On 08/07/13 13:42, Mark Jackson wrote: > On 18/01/13 05:14, Mugunthan V N wrote: >> On 1/18/2013 3:48 AM, Peter Korsgaard wrote: >>> When booting with CONFIG_ARM_APPENDED_DTB (either because of using an old >>> U-Boot, not wanting the hassle of 2 files or when using Falcon fast boot >>> mode in U-Boot), nothing updates the ethernet hwaddr specified for the >>> CPSW slaves, causing the driver to use a random hwaddr, which is some times >>> troublesome. >>> >>> The am33xx has unique ethernet hwaddrs programmed in the efuse, so it makes >>> more sense to default to these rather than random ones. Add a fixup step >>> which adds mac-address dt properties using the efuse addresses if the DTB >>> didn't contain valid ones. >>> >>> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> >>> >> >> This implementation looks fine. >> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> > > Tested-by: Mark Jackson <mpfj-list@newflow.co.uk> Is this ever going to be put into the mainline code ? ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt 2013-07-12 14:33 ` Mark Jackson @ 2013-07-15 5:31 ` Peter Korsgaard 2013-09-05 20:16 ` Matt Porter 0 siblings, 1 reply; 10+ messages in thread From: Peter Korsgaard @ 2013-07-15 5:31 UTC (permalink / raw) To: Mark Jackson, tony Cc: Mugunthan V N, linux-omap, netdev, devicetree-discuss, hvaibhav, richardcochran, tony, michal.bachraty, michal.bachraty >>>>> "Mark" == Mark Jackson <mpfj-list@newflow.co.uk> writes: Hi, Mark> On 08/07/13 13:42, Mark Jackson wrote: >> On 18/01/13 05:14, Mugunthan V N wrote: >>> On 1/18/2013 3:48 AM, Peter Korsgaard wrote: >>>> When booting with CONFIG_ARM_APPENDED_DTB (either because of using an old >>>> U-Boot, not wanting the hassle of 2 files or when using Falcon fast boot >>>> mode in U-Boot), nothing updates the ethernet hwaddr specified for the >>>> CPSW slaves, causing the driver to use a random hwaddr, which is some times >>>> troublesome. >>>> >>>> The am33xx has unique ethernet hwaddrs programmed in the efuse, so it makes >>>> more sense to default to these rather than random ones. Add a fixup step >>>> which adds mac-address dt properties using the efuse addresses if the DTB >>>> didn't contain valid ones. >>>> >>>> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> >>> >>> This implementation looks fine. >>> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> >> >> Tested-by: Mark Jackson <mpfj-list@newflow.co.uk> Mark> Is this ever going to be put into the mainline code ? Good question. Tony, could you please pick this up? It has been pending since January and has a number of acks. Do you want me to resend? -- Bye, Peter Korsgaard ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt 2013-07-15 5:31 ` Peter Korsgaard @ 2013-09-05 20:16 ` Matt Porter 2013-09-05 20:22 ` Olof Johansson 0 siblings, 1 reply; 10+ messages in thread From: Matt Porter @ 2013-09-05 20:16 UTC (permalink / raw) To: Peter Korsgaard Cc: Mark Jackson, tony, Mugunthan V N, linux-omap, netdev, devicetree-discuss, hvaibhav, richardcochran, Olof Johansson, Kevin Hilman, michal.bachraty, michal.bachraty On Mon, Jul 15, 2013 at 07:31:18AM +0200, Peter Korsgaard wrote: > >>>>> "Mark" == Mark Jackson <mpfj-list@newflow.co.uk> writes: > > Hi, > > Mark> On 08/07/13 13:42, Mark Jackson wrote: > >> On 18/01/13 05:14, Mugunthan V N wrote: > >>> On 1/18/2013 3:48 AM, Peter Korsgaard wrote: > >>>> When booting with CONFIG_ARM_APPENDED_DTB (either because of using an old > >>>> U-Boot, not wanting the hassle of 2 files or when using Falcon fast boot > >>>> mode in U-Boot), nothing updates the ethernet hwaddr specified for the > >>>> CPSW slaves, causing the driver to use a random hwaddr, which is some times > >>>> troublesome. > >>>> > >>>> The am33xx has unique ethernet hwaddrs programmed in the efuse, so it makes > >>>> more sense to default to these rather than random ones. Add a fixup step > >>>> which adds mac-address dt properties using the efuse addresses if the DTB > >>>> didn't contain valid ones. > >>>> > >>>> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> > >>> > >>> This implementation looks fine. > >>> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> > >> > >> Tested-by: Mark Jackson <mpfj-list@newflow.co.uk> > > Mark> Is this ever going to be put into the mainline code ? > > Good question. Tony, could you please pick this up? It has been pending > since January and has a number of acks. > > Do you want me to resend? Also working nicely here on 3.11. Tested-by: Matt Porter <matt.porter@linaro.org> Kevin or Olof: can you apply? Seems to be continuing no response after Ack back in January. -Matt ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt 2013-09-05 20:16 ` Matt Porter @ 2013-09-05 20:22 ` Olof Johansson 2013-09-05 21:08 ` Peter Korsgaard 0 siblings, 1 reply; 10+ messages in thread From: Olof Johansson @ 2013-09-05 20:22 UTC (permalink / raw) To: Matt Porter Cc: Peter Korsgaard, Mark Jackson, Tony Lindgren, Mugunthan V N, linux-omap, Network Development, devicetree-discuss, hvaibhav, Richard Cochran, Kevin Hilman, michal.bachraty, michal.bachraty On Thu, Sep 5, 2013 at 1:16 PM, Matt Porter <matt.porter@linaro.org> wrote: > On Mon, Jul 15, 2013 at 07:31:18AM +0200, Peter Korsgaard wrote: >> >>>>> "Mark" == Mark Jackson <mpfj-list@newflow.co.uk> writes: >> >> Hi, >> >> Mark> On 08/07/13 13:42, Mark Jackson wrote: >> >> On 18/01/13 05:14, Mugunthan V N wrote: >> >>> On 1/18/2013 3:48 AM, Peter Korsgaard wrote: >> >>>> When booting with CONFIG_ARM_APPENDED_DTB (either because of using an old >> >>>> U-Boot, not wanting the hassle of 2 files or when using Falcon fast boot >> >>>> mode in U-Boot), nothing updates the ethernet hwaddr specified for the >> >>>> CPSW slaves, causing the driver to use a random hwaddr, which is some times >> >>>> troublesome. >> >>>> >> >>>> The am33xx has unique ethernet hwaddrs programmed in the efuse, so it makes >> >>>> more sense to default to these rather than random ones. Add a fixup step >> >>>> which adds mac-address dt properties using the efuse addresses if the DTB >> >>>> didn't contain valid ones. >> >>>> >> >>>> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> >> >>> >> >>> This implementation looks fine. >> >>> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> >> >> >> >> Tested-by: Mark Jackson <mpfj-list@newflow.co.uk> >> >> Mark> Is this ever going to be put into the mainline code ? >> >> Good question. Tony, could you please pick this up? It has been pending >> since January and has a number of acks. >> >> Do you want me to resend? > > Also working nicely here on 3.11. > > Tested-by: Matt Porter <matt.porter@linaro.org> > > Kevin or Olof: can you apply? Seems to be continuing no response after > Ack back in January. I have no idea what the patch is, it's no longer in the email. Can you resend it, please? -Olof ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt 2013-09-05 20:22 ` Olof Johansson @ 2013-09-05 21:08 ` Peter Korsgaard 0 siblings, 0 replies; 10+ messages in thread From: Peter Korsgaard @ 2013-09-05 21:08 UTC (permalink / raw) To: Olof Johansson Cc: Matt Porter, Mark Jackson, Tony Lindgren, Mugunthan V N, linux-omap, Network Development, devicetree-discuss, hvaibhav, Richard Cochran, Kevin Hilman, michal.bachraty, michal.bachraty >>>>> "Olof" == Olof Johansson <olof@lixom.net> writes: >> Tested-by: Matt Porter <matt.porter@linaro.org> >> >> Kevin or Olof: can you apply? Seems to be continuing no response after >> Ack back in January. Olof> I have no idea what the patch is, it's no longer in the email. Can you Olof> resend it, please? Sure, one moment. -- Bye, Peter Korsgaard ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt 2013-07-08 12:42 ` Mark Jackson 2013-07-12 14:33 ` Mark Jackson @ 2013-09-05 20:11 ` Koen Kooi 1 sibling, 0 replies; 10+ messages in thread From: Koen Kooi @ 2013-09-05 20:11 UTC (permalink / raw) To: Mark Jackson Cc: Mugunthan V N, Peter Korsgaard, linux-omap, netdev, devicetree-discuss, hvaibhav, richardcochran, tony, michal.bachraty, michal.bachraty Op 8 jul. 2013, om 14:42 heeft Mark Jackson <mpfj-list@newflow.co.uk> het volgende geschreven: > On 18/01/13 05:14, Mugunthan V N wrote: >> On 1/18/2013 3:48 AM, Peter Korsgaard wrote: >>> When booting with CONFIG_ARM_APPENDED_DTB (either because of using an old >>> U-Boot, not wanting the hassle of 2 files or when using Falcon fast boot >>> mode in U-Boot), nothing updates the ethernet hwaddr specified for the >>> CPSW slaves, causing the driver to use a random hwaddr, which is some times >>> troublesome. >>> >>> The am33xx has unique ethernet hwaddrs programmed in the efuse, so it makes >>> more sense to default to these rather than random ones. Add a fixup step >>> which adds mac-address dt properties using the efuse addresses if the DTB >>> didn't contain valid ones. >>> >>> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> >>> >> >> This implementation looks fine. >> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> > > Tested-by: Mark Jackson <mpfj-list@newflow.co.uk> Tested-by: Koen Kooi <koen@dominion.thruhere.net> ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2013-09-05 21:08 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2013-01-17 22:18 [PATCHv2] am33xx: cpsw: default to ethernet hwaddr from efuse if not defined in dt Peter Korsgaard [not found] ` <1358461134-13452-1-git-send-email-jacmet-OfajU3CKLf1/SzgSGea1oA@public.gmane.org> 2013-01-18 5:14 ` Mugunthan V N [not found] ` <50F8DA3A.3090406-l0cyMroinI0@public.gmane.org> 2013-01-18 8:26 ` Michal Bachraty 2013-07-08 12:42 ` Mark Jackson 2013-07-12 14:33 ` Mark Jackson 2013-07-15 5:31 ` Peter Korsgaard 2013-09-05 20:16 ` Matt Porter 2013-09-05 20:22 ` Olof Johansson 2013-09-05 21:08 ` Peter Korsgaard 2013-09-05 20:11 ` Koen Kooi
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).