From: Chris Talbot <chris@talbothome.com>
To: ofono@ofono.org, netdev@vger.kernel.org,
debian-on-mobile-maintainers@alioth-lists.debian.net,
librem-5-dev@lists.community.puri.sm
Subject: [PATCH 6/9] Update README
Date: Sat, 10 Apr 2021 10:22:37 -0400 [thread overview]
Message-ID: <85928d2def5893cd90f823b563369e313e993084.camel@talbothome.com> (raw)
In-Reply-To: <9c67f5690bd4d5625b799f40e68fa54373617341.camel@talbothome.com>
This updates the README for mmsd
---
README | 66 +++++++++++++++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 61 insertions(+), 5 deletions(-)
diff --git a/README b/README
index e33be69..cecc99f 100644
--- a/README
+++ b/README
@@ -2,20 +2,76 @@ Multimedia Messaging Service
****************************
Copyright (C) 2010-2011 Intel Corporation. All rights reserved.
+Updated 2021 by: Mohammad Sadiq, kent, kop316,
+ fuzzy7k, craftyguy, anteater
+Parts adapted from: https://source.puri.sm/Librem5/purple-mm-sms
+ Copyright (C) 2018 Purism SPC
+
+About
+===========================
+mmsd is a lower level daemon that transmits and recieves MMSes. It
works with
+both the ofono stack and the Modem Manager stack.
+Please note that mmsd alone will not get MMS working! It is designed
to work
+with a higher level chat application to facilitate fetching and
+sending MMS. It interfaces with other applications via the dbus.
-Compilation and installation
+Compiling mmsd
============================
-
In order to compile proxy daemon you need following software packages:
- GCC compiler
- D-Bus library
- GLib library
+Installing mmsd
+============================
+
To configure run:
- ./configure --prefix=/usr
+ ./bootstrap-configure --prefix=/usr/
Configure automatically searches for all required components and
packages.
-To compile and install run:
- make && make install
+To compile, run:
+ make
+
+And to Install:
+ make install
+
+mmsd will be installed in /${prefix}/libexec (if you are following
this guide,
+it is /usr/libexec )
+
+To uninstall, simply remove the "mmsd" binary from /${prefix}/libexec
or run:
+ sudo make uninstall
+
+Note that you must manually configure your favorite service manager to
run
+the daemon, as this installer does not configure it to autorun.
+
+Testing out mmsd
+===========================
+To configure, run:
+ ./bootstrap-configure --enable-debug --enable-maintainer-mode
+
+Make it:
+ make
+
+Run daemon in foreground with debugging:
+ ./src/mmsd -n -d 'src/*'
+
+General Configuration
+===========================
+On first run, mmsd will write a settings file at
+"$HOME/.mms/$PLUGIN/mms"
+
+IMPORTANT NOTE: If you change settings in this file, mmsd MUST BE
RESTARTED
+ for the changes to take effect!
+
+This settings file use sane defaults, but you can change them:
+
+UseDeliveryReports
+ Whether you want delivery reports for MMSes you send
+
+TotalMaxAttachmentSize
+ The maximum size all of your attachments can be before mmsd
rejects it.
+ NOTE: This value is carrier specific! Changing this value to a
higher
+ number may cause your carrier to silently reject MMSes
you send.
+ CHANGE AT YOUR OWN RISK!
\ No newline at end of file
--
2.30.2
next prev parent reply other threads:[~2021-04-10 14:24 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-10 14:13 [PATCH 0/9] Updates for mmsd Chris Talbot
2021-04-10 14:17 ` [PATCH 1/9] Fix mmsd to work with T-mobile Chris Talbot
2021-04-10 14:20 ` [PATCH 2/9] Ensure Compatibility with Telus Canada Chris Talbot
2021-04-10 14:20 ` [PATCH 3/9] Ensure Compatibility with AT&T Chris Talbot
2021-04-10 14:21 ` [PATCH 4/9] Fix issue if there is an empty string in encoded text Chris Talbot
2021-04-10 14:22 ` [PATCH 5/9] Allow for a user configurable maximum attachment size Chris Talbot
2021-04-10 14:22 ` Chris Talbot [this message]
2021-04-10 14:23 ` [PATCH 7/9] Fix Draft and Sent Bugs Chris Talbot
2021-04-10 14:23 ` [PATCH 8/9] Allow Maintainer mode to compile without -WError Chris Talbot
2021-04-10 14:24 ` [PATCH 9/9] Enable support for Modem Manager Chris Talbot
2021-04-14 18:21 ` Forking on MMSD Chris Talbot
2021-04-14 18:30 ` [Debian-on-mobile-maintainers] " Guido Günther
2021-04-14 18:46 ` Chris Talbot
2021-04-15 9:10 ` Guido Günther
2021-04-14 18:39 ` Marius Gripsgard
2021-04-14 22:09 ` Bug#985893: " Wookey
2021-04-15 0:12 ` Chris Talbot
2021-04-14 19:29 ` Pavel Machek
2021-04-14 21:11 ` Bug#985893: " Paul Wise
-- strict thread matches above, loose matches on Subject: below --
2021-03-26 10:51 [PATCH 6/9] Update README Christopher Talbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=85928d2def5893cd90f823b563369e313e993084.camel@talbothome.com \
--to=chris@talbothome.com \
--cc=debian-on-mobile-maintainers@alioth-lists.debian.net \
--cc=librem-5-dev@lists.community.puri.sm \
--cc=netdev@vger.kernel.org \
--cc=ofono@ofono.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).