netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maxim Uvarov <muvarov@gmail.com>
To: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: netdev <netdev@vger.kernel.org>,
	grygorii.strashko@ti.com, ivan.khoronzhuk@linaro.org,
	nsekhar@ti.com, jiri@resnulli.us, ivecera@redhat.com,
	francois.ozog@linaro.org, yogeshs@ti.com, spatton@ti.com
Subject: Re: [PATCH 3/4] cpsw_switchdev: add switchdev support files
Date: Thu, 24 May 2018 13:00:10 +0300	[thread overview]
Message-ID: <CAJGZr0LpTT=Wo67PD1deRZAmtu4QDhtAp5VhgF=NWS0vQAZW6g@mail.gmail.com> (raw)
In-Reply-To: <1527144984-31236-4-git-send-email-ilias.apalodimas@linaro.org>

2018-05-24 9:56 GMT+03:00 Ilias Apalodimas <ilias.apalodimas@linaro.org>:
> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
> ---
>  drivers/net/ethernet/ti/Kconfig          |   9 +
>  drivers/net/ethernet/ti/Makefile         |   1 +
>  drivers/net/ethernet/ti/cpsw_switchdev.c | 299 +++++++++++++++++++++++++++++++
>  drivers/net/ethernet/ti/cpsw_switchdev.h |   4 +
>  4 files changed, 313 insertions(+)
>  create mode 100644 drivers/net/ethernet/ti/cpsw_switchdev.c
>  create mode 100644 drivers/net/ethernet/ti/cpsw_switchdev.h
>
> diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
> index 48a541e..b22ae7d 100644
> --- a/drivers/net/ethernet/ti/Kconfig
> +++ b/drivers/net/ethernet/ti/Kconfig
> @@ -73,6 +73,15 @@ config TI_CPSW
>           To compile this driver as a module, choose M here: the module
>           will be called cpsw.
>
> +config TI_CPSW_SWITCHDEV
> +       bool "TI CPSW switchdev support"
> +       depends on TI_CPSW
> +       depends on NET_SWITCHDEV
> +       help
> +         Enable switchdev support on TI's CPSW Ethernet Switch.
> +
> +         This will allow you to configure the switch using standard tools.
> +
>  config TI_CPTS
>         bool "TI Common Platform Time Sync (CPTS) Support"
>         depends on TI_CPSW || TI_KEYSTONE_NETCP
> diff --git a/drivers/net/ethernet/ti/Makefile b/drivers/net/ethernet/ti/Makefile
> index 0be551d..3926c6a 100644
> --- a/drivers/net/ethernet/ti/Makefile
> +++ b/drivers/net/ethernet/ti/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_TI_CPSW_PHY_SEL) += cpsw-phy-sel.o
>  obj-$(CONFIG_TI_CPSW_ALE) += cpsw_ale.o
>  obj-$(CONFIG_TI_CPTS_MOD) += cpts.o
>  obj-$(CONFIG_TI_CPSW) += ti_cpsw.o
> +ti_cpsw-objs:= cpsw_switchdev.o
>  ti_cpsw-y := cpsw.o
>
>  obj-$(CONFIG_TI_KEYSTONE_NETCP) += keystone_netcp.o
> diff --git a/drivers/net/ethernet/ti/cpsw_switchdev.c b/drivers/net/ethernet/ti/cpsw_switchdev.c
> new file mode 100644
> index 0000000..bf8c1bf
> --- /dev/null
> +++ b/drivers/net/ethernet/ti/cpsw_switchdev.c
> @@ -0,0 +1,299 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Texas Instruments switchdev Driver
> + *
> + * Copyright (C) 2018 Texas Instruments
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/etherdevice.h>
> +#include <linux/if_bridge.h>
> +#include <net/switchdev.h>
> +#include "cpsw.h"
> +#include "cpsw_priv.h"
> +#include "cpsw_ale.h"
> +
> +static u32 cpsw_switchdev_get_ver(struct net_device *ndev)
> +{
> +       struct cpsw_priv *priv = netdev_priv(ndev);
> +       struct cpsw_common *cpsw = priv->cpsw;
> +
> +       return cpsw->version;
> +}
> +
> +static int cpsw_port_attr_set(struct net_device *dev,
> +                             const struct switchdev_attr *attr,
> +                             struct switchdev_trans *trans)
> +{
> +       return -EOPNOTSUPP;
> +}
> +
> +static int cpsw_port_attr_get(struct net_device *dev,
> +                             struct switchdev_attr *attr)
> +{
> +       u32 cpsw_ver;
> +       int err = 0;
> +
> +       switch (attr->id) {
> +       case SWITCHDEV_ATTR_ID_PORT_PARENT_ID:
> +               cpsw_ver = cpsw_switchdev_get_ver(dev);
> +               attr->u.ppid.id_len = sizeof(cpsw_ver);
> +               memcpy(&attr->u.ppid.id, &cpsw_ver, attr->u.ppid.id_len);
> +               break;
> +       default:
> +               return -EOPNOTSUPP;
> +       }
> +
> +       return err;

err is always 0 here.

> +}
> +
> +static u16 cpsw_get_pvid(struct cpsw_priv *priv)
> +{
> +       struct cpsw_common *cpsw = priv->cpsw;
> +       u32 __iomem *port_vlan_reg;
> +       u32 pvid;
> +
> +       if (priv->emac_port) {
> +               int reg = CPSW2_PORT_VLAN;
> +
> +               if (cpsw->version == CPSW_VERSION_1)
> +                       reg = CPSW1_PORT_VLAN;
> +               pvid = slave_read(cpsw->slaves + (priv->emac_port - 1), reg);
> +       } else {
> +               port_vlan_reg = &cpsw->host_port_regs->port_vlan;
> +               pvid = readl(port_vlan_reg);
> +       }
> +
> +       pvid = pvid & 0xfff;
> +
> +       return pvid;
> +}
> +
> +static void cpsw_set_pvid(struct cpsw_priv *priv, u16 vid, bool cfi, u32 cos)
> +{
> +       struct cpsw_common *cpsw = priv->cpsw;
> +       void __iomem *port_vlan_reg;
> +       u32 pvid;
> +
> +       pvid = vid;
> +       pvid |= cfi ? BIT(12) : 0;
> +       pvid |= (cos & 0x7) << 13;
> +
> +       if (priv->emac_port) {
> +               int reg = CPSW2_PORT_VLAN;
> +
> +               if (cpsw->version == CPSW_VERSION_1)
> +                       reg = CPSW1_PORT_VLAN;
> +               /* no barrier */
> +               slave_write(cpsw->slaves + (priv->emac_port - 1), pvid, reg);
> +       } else {
> +               /* CPU port */
> +               port_vlan_reg = &cpsw->host_port_regs->port_vlan;
> +               writel(pvid, port_vlan_reg);
> +       }
> +}
> +
> +static int cpsw_port_vlan_add(struct cpsw_priv *priv, bool untag, bool pvid,
> +                             u16 vid)
> +{
> +       struct cpsw_common *cpsw = priv->cpsw;
> +       int port_mask = BIT(priv->emac_port);
> +       int unreg_mcast_mask = 0;
> +       int reg_mcast_mask = 0;
> +       int untag_mask = 0;
> +       int ret = 0;
> +
> +       if (priv->ndev->flags & IFF_ALLMULTI)
> +               unreg_mcast_mask = port_mask;
> +
> +       if (priv->ndev->flags & IFF_MULTICAST)
> +               reg_mcast_mask = port_mask;
> +
> +       if (untag)
> +               untag_mask = port_mask;
> +
> +       ret = cpsw_ale_vlan_add_modify(cpsw->ale, vid, port_mask, untag_mask,
> +                                      reg_mcast_mask, unreg_mcast_mask);
> +       if (ret) {
> +               dev_err(priv->dev, "Unable to add vlan\n");
> +               return ret;
> +       }
> +
> +       if (!pvid)
> +               return ret;
> +
> +       cpsw_set_pvid(priv, vid, 0, 0);
> +
> +       dev_dbg(priv->dev, "VID: %u dev: %s port: %u\n", vid,
> +               priv->ndev->name, priv->emac_port);
> +
> +       return ret;
> +}
> +
> +static int cpsw_port_vlan_del(struct cpsw_priv *priv, u16 vid)
> +{
> +       struct cpsw_common *cpsw = priv->cpsw;
> +       int port_mask = BIT(priv->emac_port);
> +       int ret = 0;

no need to set it to 0 here.

> +
> +       ret = cpsw_ale_vlan_del_modify(cpsw->ale, vid, port_mask);
> +       if (ret != 0)
> +               return ret;
> +
> +       ret = cpsw_ale_del_ucast(cpsw->ale, priv->mac_addr,
> +                                HOST_PORT_NUM, ALE_VLAN, vid);
> +
> +       if (vid == cpsw_get_pvid(priv))
> +               cpsw_set_pvid(priv, 0, 0, 0);
> +
> +       if (ret != 0) {
> +               dev_dbg(priv->dev, "Failed to delete unicast entry\n");
> +               ret = 0;

no need to set it to 0.

> +       }
> +
> +       ret = cpsw_ale_del_mcast(cpsw->ale, priv->ndev->broadcast,
> +                                0, ALE_VLAN, vid);
> +       if (ret != 0) {
> +               dev_dbg(priv->dev, "Failed to delete multicast entry\n");
> +               ret = 0;
> +       }
> +

just return 0 as it always returned.

> +       return ret;
> +}
> +
> +static int cpsw_port_vlans_add(struct cpsw_priv *priv,
> +                              const struct switchdev_obj_port_vlan *vlan,
> +                              struct switchdev_trans *trans)
> +{
> +       bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
> +       bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
> +       u16 vid;
> +
> +       if (switchdev_trans_ph_prepare(trans))
> +               return 0;
> +
> +       for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
> +               int err;
> +
> +               err = cpsw_port_vlan_add(priv, untagged, pvid, vid);
> +               if (err)
> +                       return err;
> +       }
> +
> +       return 0;
> +}
> +
> +static int cpsw_port_vlans_del(struct cpsw_priv *priv,
> +                              const struct switchdev_obj_port_vlan *vlan)
> +
> +{
> +       u16 vid;
> +
> +       for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
> +               int err;
> +
> +               err = cpsw_port_vlan_del(priv, vid);
> +               if (err)
> +                       return err;
> +       }
> +
> +       return 0;
> +}
> +
> +static int cpsw_port_mdb_add(struct cpsw_priv *priv,
> +                            struct switchdev_obj_port_mdb *mdb,
> +                            struct switchdev_trans *trans)
> +{
> +       struct cpsw_common *cpsw = priv->cpsw;
> +       int port_mask;
> +       int err;
> +
> +       if (switchdev_trans_ph_prepare(trans))
> +               return 0;
> +
> +       port_mask = BIT(priv->emac_port);
> +       err = cpsw_ale_mcast_add_modify(cpsw->ale, mdb->addr, port_mask,
> +                                       ALE_VLAN, mdb->vid, 0);
> +
> +       return err;
> +}
> +
> +static int cpsw_port_mdb_del(struct cpsw_priv *priv,
> +                            struct switchdev_obj_port_mdb *mdb)
> +
> +{
> +       struct cpsw_common *cpsw = priv->cpsw;
> +       int del_mask;
> +       int err;
> +
> +       del_mask = BIT(priv->emac_port);
> +       err = cpsw_ale_mcast_del_modify(cpsw->ale, mdb->addr, del_mask,
> +                                       ALE_VLAN, mdb->vid);
> +
> +       return err;
> +}
> +
> +static int cpsw_port_obj_add(struct net_device *ndev,
> +                            const struct switchdev_obj *obj,
> +                            struct switchdev_trans *trans)
> +{
> +       struct switchdev_obj_port_vlan *vlan = SWITCHDEV_OBJ_PORT_VLAN(obj);
> +       struct switchdev_obj_port_mdb *mdb = SWITCHDEV_OBJ_PORT_MDB(obj);
> +       struct cpsw_priv *priv = netdev_priv(ndev);
> +       int err = 0;
> +
> +       switch (obj->id) {
> +       case SWITCHDEV_OBJ_ID_PORT_VLAN:
> +               err = cpsw_port_vlans_add(priv, vlan, trans);
> +               break;
> +       case SWITCHDEV_OBJ_ID_PORT_MDB:
> +               err = cpsw_port_mdb_add(priv, mdb, trans);
> +               break;
> +       default:
> +               err = -EOPNOTSUPP;
> +               break;
> +       }
> +
> +       return err;
> +}
> +
> +static int cpsw_port_obj_del(struct net_device *ndev,
> +                            const struct switchdev_obj *obj)
> +{
> +       struct switchdev_obj_port_vlan *vlan = SWITCHDEV_OBJ_PORT_VLAN(obj);
> +       struct cpsw_priv *priv = netdev_priv(ndev);
> +       int err = 0;
> +
> +       switch (obj->id) {
> +       case SWITCHDEV_OBJ_ID_PORT_VLAN:
> +               err = cpsw_port_vlans_del(priv, vlan);
> +               break;
> +       case SWITCHDEV_OBJ_ID_PORT_MDB:
> +               err = cpsw_port_mdb_del(priv, SWITCHDEV_OBJ_PORT_MDB(obj));
> +               break;
> +       default:
> +               err = -EOPNOTSUPP;
> +               break;
> +       }
> +
> +       return err;
> +}
> +
> +static const struct switchdev_ops cpsw_port_switchdev_ops = {
> +       .switchdev_port_attr_set        = cpsw_port_attr_set,
> +       .switchdev_port_attr_get        = cpsw_port_attr_get,
> +       .switchdev_port_obj_add         = cpsw_port_obj_add,
> +       .switchdev_port_obj_del         = cpsw_port_obj_del,
> +};
> +
> +void cpsw_port_switchdev_init(struct net_device *ndev)
> +{
> +       ndev->switchdev_ops = &cpsw_port_switchdev_ops;
> +}
> diff --git a/drivers/net/ethernet/ti/cpsw_switchdev.h b/drivers/net/ethernet/ti/cpsw_switchdev.h
> new file mode 100644
> index 0000000..4940462
> --- /dev/null
> +++ b/drivers/net/ethernet/ti/cpsw_switchdev.h
> @@ -0,0 +1,4 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#include <net/switchdev.h>
> +
> +void cpsw_port_switchdev_init(struct net_device *ndev);
> --
> 2.7.4
>



-- 
Best regards,
Maxim Uvarov

  reply	other threads:[~2018-05-24 10:00 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-24  6:56 [PATCH 0/4] RFC CPSW switchdev mode Ilias Apalodimas
2018-05-24  6:56 ` [PATCH 1/4] cpsw: move common headers definitions to cpsw_priv.h Ilias Apalodimas
2018-05-24  6:56 ` [PATCH 2/4] cpsw_ale: add support functions for switchdev Ilias Apalodimas
2018-05-24  6:56 ` [PATCH 3/4] cpsw_switchdev: add switchdev support files Ilias Apalodimas
2018-05-24 10:00   ` Maxim Uvarov [this message]
2018-05-27  4:39   ` kbuild test robot
2018-05-24  6:56 ` [PATCH 4/4] cpsw: add switchdev support Ilias Apalodimas
2018-05-24 13:12   ` Andrew Lunn
2018-05-24 13:32     ` Ilias Apalodimas
2018-05-24 16:39       ` Andrew Lunn
2018-05-25  4:56         ` Ilias Apalodimas
2018-06-01 21:48           ` Florian Fainelli
2018-06-02 10:34             ` Ilias Apalodimas
2018-06-02 16:10               ` Florian Fainelli
2018-06-02 16:52                 ` Ilias Apalodimas
2018-06-05 21:03               ` Grygorii Strashko
2018-06-05 21:37                 ` Florian Fainelli
2018-05-24  8:05 ` [PATCH 0/4] RFC CPSW switchdev mode Jiri Pirko
2018-05-24  8:48   ` Ilias Apalodimas
2018-05-24 12:54     ` Andrew Lunn
2018-05-24 13:44       ` Ivan Vecera
2018-05-24 14:08         ` Ilias Apalodimas
2018-05-24 14:54           ` Andrew Lunn
2018-05-24 15:07             ` Ilias Apalodimas
2018-05-24 15:25               ` Andrew Lunn
2018-05-24 16:02                 ` Ilias Apalodimas
2018-05-24 16:33                   ` Andrew Lunn
2018-05-25  6:29                     ` Ilias Apalodimas
2018-05-25 10:28                       ` Ilias Apalodimas
2018-05-25 11:59                         ` Andrew Lunn
2018-05-25 12:09                       ` Andrew Lunn
2018-05-31 15:27                         ` Ilias Apalodimas
2018-06-02 23:28           ` Grygorii Strashko
2018-06-03  0:08             ` Andrew Lunn
2018-06-05 21:18               ` Grygorii Strashko
2018-06-05 21:28                 ` Andrew Lunn
2018-06-05 21:42                   ` Grygorii Strashko
2018-06-05 21:55                     ` Andrew Lunn
2018-06-03  0:26             ` Andrew Lunn
2018-06-05 23:23               ` Grygorii Strashko
2018-06-05 23:49                 ` Andrew Lunn
2018-06-06  8:23                 ` Ivan Khoronzhuk
2018-06-03  0:37             ` Andrew Lunn
2018-06-05 21:31               ` Grygorii Strashko
2018-06-05 21:37                 ` Andrew Lunn
2018-06-03  0:49             ` Andrew Lunn
2018-06-05 22:45               ` Grygorii Strashko
2018-06-05 23:40                 ` Andrew Lunn
2018-06-01 21:29 ` Grygorii Strashko
2018-06-02 14:08   ` Andrew Lunn
2018-06-05 22:59     ` Grygorii Strashko
2018-06-05 23:53       ` Andrew Lunn
2018-06-06  6:42         ` Ilias Apalodimas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAJGZr0LpTT=Wo67PD1deRZAmtu4QDhtAp5VhgF=NWS0vQAZW6g@mail.gmail.com' \
    --to=muvarov@gmail.com \
    --cc=francois.ozog@linaro.org \
    --cc=grygorii.strashko@ti.com \
    --cc=ilias.apalodimas@linaro.org \
    --cc=ivan.khoronzhuk@linaro.org \
    --cc=ivecera@redhat.com \
    --cc=jiri@resnulli.us \
    --cc=netdev@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=spatton@ti.com \
    --cc=yogeshs@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).