[net-next 0/4][pull request] 40GbE Intel Wired LAN Driver Updates 2020-11-13

[net-next 0/4][pull request] 40GbE Intel Wired LAN Driver Updates 2020-11-13

[Tony Nguyen]

This series contains updates to i40e and igbvf drivers.

Piotr adds support for PTP external clock synchronization to i40e via
GPIO pins.

Marek removes a redundant assignment for i40e.

Stefan Assmann corrects reporting of VF link speed for i40e.

Karen revises a couple of error messages to warnings for igbvf as they
could be misinterpreted as issues when they are not.

The following are changes since commit e1d9d7b91302593d1951fcb12feddda6fb58a3c0:
  Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue 40GbE

Karen Sornek (1):
  igbvf: Refactor traces

Marek Majtyka (1):
  i40e: remove redundant assignment

Piotr Kwapulinski (1):
  i40e: add support for PTP external synchronization clock

Stefan Assmann (1):
  i40e: report correct VF link speed when link state is set to enable

 drivers/net/ethernet/intel/i40e/i40e.h        |  76 +-
 drivers/net/ethernet/intel/i40e/i40e_main.c   |  18 +-
 drivers/net/ethernet/intel/i40e/i40e_ptp.c    | 747 +++++++++++++++++-
 .../net/ethernet/intel/i40e/i40e_register.h   |  31 +-
 .../ethernet/intel/i40e/i40e_virtchnl_pf.c    |   5 +-
 drivers/net/ethernet/intel/i40e/i40e_xsk.c    |   1 -
 drivers/net/ethernet/intel/igbvf/netdev.c     |   4 +-
 7 files changed, 851 insertions(+), 31 deletions(-)

-- 
2.26.2

[net-next 1/4] i40e: add support for PTP external synchronization clock

[Tony Nguyen]

From: Piotr Kwapulinski <piotr.kwapulinski@intel.com>

Add support for external synchronization clock via GPIOs.
1PPS signals are handled via the dedicated 3 GPIOs: SDP3_2,
SDP3_3 and GPIO_4.
Previously it was not possible to use the external PTP
synchronization clock.

Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h        |  76 +-
 drivers/net/ethernet/intel/i40e/i40e_main.c   |  18 +-
 drivers/net/ethernet/intel/i40e/i40e_ptp.c    | 747 +++++++++++++++++-
 .../net/ethernet/intel/i40e/i40e_register.h   |  31 +-
 4 files changed, 846 insertions(+), 26 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 537300e762f0..8f5eecbff3d6 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -196,6 +196,11 @@ enum i40e_fd_stat_idx {
 #define I40E_FD_ATR_TUNNEL_STAT_IDX(pf_id) \
 			(I40E_FD_STAT_PF_IDX(pf_id) + I40E_FD_STAT_ATR_TUNNEL)
 
+/* get PTP pins for ioctl */
+#define SIOCGPINS	(SIOCDEVPRIVATE + 0)
+/* set PTP pins for ioctl */
+#define SIOCSPINS	(SIOCDEVPRIVATE + 1)
+
 /* The following structure contains the data parsed from the user-defined
  * field of the ethtool_rx_flow_spec structure.
  */
@@ -344,7 +349,6 @@ struct i40e_ddp_old_profile_list {
 					     I40E_FLEX_SET_FSIZE(fsize) | \
 					     I40E_FLEX_SET_SRC_WORD(src))
 
-
 #define I40E_MAX_FLEX_SRC_OFFSET 0x1F
 
 /* macros related to GLQF_ORT */
@@ -414,6 +418,8 @@ struct i40e_channel {
 	struct i40e_vsi *parent_vsi;
 };
 
+struct i40e_ptp_pins_settings;
+
 static inline bool i40e_is_channel_macvlan(struct i40e_channel *ch)
 {
 	return !!ch->fwd;
@@ -623,12 +629,72 @@ struct i40e_pf {
 
 	struct i40e_filter_control_settings filter_settings;
 
+/* GPIO defines used by PTP */
+#define I40E_SDP3_2			18
+#define I40E_SDP3_3			19
+#define I40E_GPIO_4			20
+#define I40E_LED2_0			26
+#define I40E_LED2_1			27
+#define I40E_LED3_0			28
+#define I40E_LED3_1			29
+#define I40E_GLGEN_GPIO_SET_SDP_DATA_HI \
+	(1 << I40E_GLGEN_GPIO_SET_SDP_DATA_SHIFT)
+#define I40E_GLGEN_GPIO_SET_DRV_SDP_DATA \
+	(1 << I40E_GLGEN_GPIO_SET_DRIVE_SDP_SHIFT)
+#define I40E_GLGEN_GPIO_CTL_PRT_NUM_0 \
+	(0 << I40E_GLGEN_GPIO_CTL_PRT_NUM_SHIFT)
+#define I40E_GLGEN_GPIO_CTL_PRT_NUM_1 \
+	(1 << I40E_GLGEN_GPIO_CTL_PRT_NUM_SHIFT)
+#define I40E_GLGEN_GPIO_CTL_RESERVED	BIT(2)
+#define I40E_GLGEN_GPIO_CTL_DIR_OUT \
+	(1 << I40E_GLGEN_GPIO_CTL_PIN_DIR_SHIFT)
+#define I40E_GLGEN_GPIO_CTL_TRI_DRV_HI \
+	(1 << I40E_GLGEN_GPIO_CTL_TRI_CTL_SHIFT)
+#define I40E_GLGEN_GPIO_CTL_OUT_HI_RST \
+	(1 << I40E_GLGEN_GPIO_CTL_OUT_CTL_SHIFT)
+#define I40E_GLGEN_GPIO_CTL_TIMESYNC_0 \
+	(3 << I40E_GLGEN_GPIO_CTL_PIN_FUNC_SHIFT)
+#define I40E_GLGEN_GPIO_CTL_TIMESYNC_1 \
+	(4 << I40E_GLGEN_GPIO_CTL_PIN_FUNC_SHIFT)
+#define I40E_GLGEN_GPIO_CTL_NOT_FOR_PHY_CONN \
+	(0x3F << I40E_GLGEN_GPIO_CTL_PHY_PIN_NAME_SHIFT)
+#define I40E_GLGEN_GPIO_CTL_PORT_0_IN_TIMESYNC_0 \
+	(I40E_GLGEN_GPIO_CTL_NOT_FOR_PHY_CONN | \
+	 I40E_GLGEN_GPIO_CTL_TIMESYNC_0 | \
+	 I40E_GLGEN_GPIO_CTL_RESERVED | I40E_GLGEN_GPIO_CTL_PRT_NUM_0)
+#define I40E_GLGEN_GPIO_CTL_PORT_1_IN_TIMESYNC_0 \
+	(I40E_GLGEN_GPIO_CTL_NOT_FOR_PHY_CONN | \
+	 I40E_GLGEN_GPIO_CTL_TIMESYNC_0 | \
+	 I40E_GLGEN_GPIO_CTL_RESERVED | I40E_GLGEN_GPIO_CTL_PRT_NUM_1)
+#define I40E_GLGEN_GPIO_CTL_PORT_0_OUT_TIMESYNC_1 \
+	(I40E_GLGEN_GPIO_CTL_NOT_FOR_PHY_CONN | \
+	 I40E_GLGEN_GPIO_CTL_TIMESYNC_1 | I40E_GLGEN_GPIO_CTL_OUT_HI_RST | \
+	 I40E_GLGEN_GPIO_CTL_TRI_DRV_HI | I40E_GLGEN_GPIO_CTL_DIR_OUT | \
+	 I40E_GLGEN_GPIO_CTL_RESERVED | I40E_GLGEN_GPIO_CTL_PRT_NUM_0)
+#define I40E_GLGEN_GPIO_CTL_PORT_1_OUT_TIMESYNC_1 \
+	(I40E_GLGEN_GPIO_CTL_NOT_FOR_PHY_CONN | \
+	 I40E_GLGEN_GPIO_CTL_TIMESYNC_1 | I40E_GLGEN_GPIO_CTL_OUT_HI_RST | \
+	 I40E_GLGEN_GPIO_CTL_TRI_DRV_HI | I40E_GLGEN_GPIO_CTL_DIR_OUT | \
+	 I40E_GLGEN_GPIO_CTL_RESERVED | I40E_GLGEN_GPIO_CTL_PRT_NUM_1)
+#define I40E_PRTTSYN_AUX_1_INSTNT \
+	(1 << I40E_PRTTSYN_AUX_1_INSTNT_SHIFT)
+#define I40E_PRTTSYN_AUX_0_OUT_ENABLE \
+	(1 << I40E_PRTTSYN_AUX_0_OUT_ENA_SHIFT)
+#define I40E_PRTTSYN_AUX_0_OUT_CLK_MOD	(3 << I40E_PRTTSYN_AUX_0_OUTMOD_SHIFT)
+#define I40E_PRTTSYN_AUX_0_OUT_ENABLE_CLK_MOD \
+	(I40E_PRTTSYN_AUX_0_OUT_ENABLE | I40E_PRTTSYN_AUX_0_OUT_CLK_MOD)
+#define I40E_PTP_HALF_SECOND		500000000LL /* nano seconds */
+#define I40E_PTP_2_SEC_DELAY		2
+
 	struct ptp_clock *ptp_clock;
 	struct ptp_clock_info ptp_caps;
 	struct sk_buff *ptp_tx_skb;
 	unsigned long ptp_tx_start;
 	struct hwtstamp_config tstamp_config;
 	struct timespec64 ptp_prev_hw_time;
+	struct work_struct ptp_pps_work;
+	struct work_struct ptp_extts0_work;
+	struct work_struct ptp_extts1_work;
 	ktime_t ptp_reset_start;
 	struct mutex tmreg_lock; /* Used to protect the SYSTIME registers. */
 	u32 ptp_adj_mult;
@@ -636,10 +702,14 @@ struct i40e_pf {
 	u32 tx_hwtstamp_skipped;
 	u32 rx_hwtstamp_cleared;
 	u32 latch_event_flags;
+	u64 ptp_pps_start;
+	u32 pps_delay;
 	spinlock_t ptp_rx_lock; /* Used to protect Rx timestamp registers. */
+	struct ptp_pin_desc ptp_pin[3];
 	unsigned long latch_events[4];
 	bool ptp_tx;
 	bool ptp_rx;
+	struct i40e_ptp_pins_settings *ptp_pins;
 	u16 rss_table_size; /* HW RSS table size */
 	u32 max_bw;
 	u32 min_bw;
@@ -772,7 +842,6 @@ struct i40e_vsi {
 	u8  *rss_hkey_user;	/* User configured hash keys */
 	u8  *rss_lut_user;	/* User configured lookup table entries */
 
-
 	u16 max_frame;
 	u16 rx_buf_len;
 
@@ -1135,10 +1204,13 @@ void i40e_ptp_rx_hwtstamp(struct i40e_pf *pf, struct sk_buff *skb, u8 index);
 void i40e_ptp_set_increment(struct i40e_pf *pf);
 int i40e_ptp_set_ts_config(struct i40e_pf *pf, struct ifreq *ifr);
 int i40e_ptp_get_ts_config(struct i40e_pf *pf, struct ifreq *ifr);
+int i40e_ptp_set_pins_ioctl(struct i40e_pf *pf, struct ifreq *ifr);
+int i40e_ptp_get_pins(struct i40e_pf *pf, struct ifreq *ifr);
 void i40e_ptp_save_hw_time(struct i40e_pf *pf);
 void i40e_ptp_restore_hw_time(struct i40e_pf *pf);
 void i40e_ptp_init(struct i40e_pf *pf);
 void i40e_ptp_stop(struct i40e_pf *pf);
+int i40e_ptp_alloc_pins(struct i40e_pf *pf);
 int i40e_is_vsi_uplink_mode_veb(struct i40e_vsi *vsi);
 i40e_status i40e_get_partition_bw_setting(struct i40e_pf *pf);
 i40e_status i40e_set_partition_bw_setting(struct i40e_pf *pf);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 4f8a2154b93f..bfe2bc94896a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2692,7 +2692,15 @@ int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 	case SIOCGHWTSTAMP:
 		return i40e_ptp_get_ts_config(pf, ifr);
 	case SIOCSHWTSTAMP:
+		if (!capable(CAP_SYS_ADMIN))
+			return -EACCES;
 		return i40e_ptp_set_ts_config(pf, ifr);
+	case SIOCSPINS:
+		if (!capable(CAP_SYS_ADMIN))
+			return -EACCES;
+		return i40e_ptp_set_pins_ioctl(pf, ifr);
+	case SIOCGPINS:
+		return i40e_ptp_get_pins(pf, ifr);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -4042,10 +4050,13 @@ static irqreturn_t i40e_intr(int irq, void *data)
 	if (icr0 & I40E_PFINT_ICR0_TIMESYNC_MASK) {
 		u32 prttsyn_stat = rd32(hw, I40E_PRTTSYN_STAT_0);
 
-		if (prttsyn_stat & I40E_PRTTSYN_STAT_0_TXTIME_MASK) {
-			icr0 &= ~I40E_PFINT_ICR0_ENA_TIMESYNC_MASK;
+		if (prttsyn_stat & I40E_PRTTSYN_STAT_0_EVENT0_MASK)
+			schedule_work(&pf->ptp_extts0_work);
+
+		if (prttsyn_stat & I40E_PRTTSYN_STAT_0_TXTIME_MASK)
 			i40e_ptp_tx_hwtstamp(pf);
-		}
+
+		icr0 &= ~I40E_PFINT_ICR0_ENA_TIMESYNC_MASK;
 	}
 
 	/* If a critical error is pending we have no choice but to reset the
@@ -14941,6 +14952,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (is_valid_ether_addr(hw->mac.port_addr))
 		pf->hw_features |= I40E_HW_PORT_ID_VALID;
 
+	i40e_ptp_alloc_pins(pf);
 	pci_set_drvdata(pdev, pf);
 	pci_save_state(pdev);
 
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
index 7a879614ca55..1d9f3678fa8b 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
@@ -3,6 +3,7 @@
 
 #include "i40e.h"
 #include <linux/ptp_classify.h>
+#include <linux/posix-clock.h>
 
 /* The XL710 timesync is very much like Intel's 82599 design when it comes to
  * the fundamental clock design. However, the clock operations are much simpler
@@ -19,10 +20,231 @@
 #define I40E_PTP_40GB_INCVAL		0x0199999999ULL
 #define I40E_PTP_10GB_INCVAL_MULT	2
 #define I40E_PTP_1GB_INCVAL_MULT	20
+#define I40E_ISGN			0x80000000
 
 #define I40E_PRTTSYN_CTL1_TSYNTYPE_V1  BIT(I40E_PRTTSYN_CTL1_TSYNTYPE_SHIFT)
 #define I40E_PRTTSYN_CTL1_TSYNTYPE_V2  (2 << \
 					I40E_PRTTSYN_CTL1_TSYNTYPE_SHIFT)
+#define I40E_SUBDEV_ID_25G_PTP_PIN	0xB
+#define to_dev(obj) container_of(obj, struct device, kobj)
+
+enum i40e_ptp_pin {
+	SDP3_2 = 0,
+	SDP3_3,
+	GPIO_4
+};
+
+static struct ptp_pin_desc sdp_desc[] = {
+	/* name     idx      func      chan */
+	{"SDP3_2", SDP3_2, PTP_PF_NONE, 0},
+	{"SDP3_3", SDP3_3, PTP_PF_NONE, 1},
+	{"GPIO_4", GPIO_4, PTP_PF_NONE, 1},
+};
+
+enum i40e_ptp_gpio_pin_state {
+	end = -2,
+	invalid,
+	off,
+	in_A,
+	in_B,
+	out_A,
+	out_B,
+};
+
+static const char * const i40e_ptp_gpio_pin_state2str[] = {
+	"off", "in_A", "in_B", "out_A", "out_B"
+};
+
+enum i40e_ptp_led_pin_state {
+	led_end = -2,
+	low = 0,
+	high,
+};
+
+struct i40e_ptp_pins_settings {
+	enum i40e_ptp_gpio_pin_state sdp3_2;
+	enum i40e_ptp_gpio_pin_state sdp3_3;
+	enum i40e_ptp_gpio_pin_state gpio_4;
+	enum i40e_ptp_led_pin_state led2_0;
+	enum i40e_ptp_led_pin_state led2_1;
+	enum i40e_ptp_led_pin_state led3_0;
+	enum i40e_ptp_led_pin_state led3_1;
+};
+
+static const struct i40e_ptp_pins_settings
+	i40e_ptp_pin_led_allowed_states[] = {
+	{off,	off,	off,		high,	high,	high,	high},
+	{off,	in_A,	off,		high,	high,	high,	low},
+	{off,	out_A,	off,		high,	low,	high,	high},
+	{off,	in_B,	off,		high,	high,	high,	low},
+	{off,	out_B,	off,		high,	low,	high,	high},
+	{in_A,	off,	off,		high,	high,	high,	low},
+	{in_A,	in_B,	off,		high,	high,	high,	low},
+	{in_A,	out_B,	off,		high,	low,	high,	high},
+	{out_A,	off,	off,		high,	low,	high,	high},
+	{out_A,	in_B,	off,		high,	low,	high,	high},
+	{in_B,	off,	off,		high,	high,	high,	low},
+	{in_B,	in_A,	off,		high,	high,	high,	low},
+	{in_B,	out_A,	off,		high,	low,	high,	high},
+	{out_B,	off,	off,		high,	low,	high,	high},
+	{out_B,	in_A,	off,		high,	low,	high,	high},
+	{off,	off,	in_A,		high,	high,	low,	high},
+	{off,	out_A,	in_A,		high,	low,	low,	high},
+	{off,	in_B,	in_A,		high,	high,	low,	low},
+	{off,	out_B,	in_A,		high,	low,	low,	high},
+	{out_A,	off,	in_A,		high,	low,	low,	high},
+	{out_A,	in_B,	in_A,		high,	low,	low,	high},
+	{in_B,	off,	in_A,		high,	high,	low,	low},
+	{in_B,	out_A,	in_A,		high,	low,	low,	high},
+	{out_B,	off,	in_A,		high,	low,	low,	high},
+	{off,	off,	out_A,		low,	high,	high,	high},
+	{off,	in_A,	out_A,		low,	high,	high,	low},
+	{off,	in_B,	out_A,		low,	high,	high,	low},
+	{off,	out_B,	out_A,		low,	low,	high,	high},
+	{in_A,	off,	out_A,		low,	high,	high,	low},
+	{in_A,	in_B,	out_A,		low,	high,	high,	low},
+	{in_A,	out_B,	out_A,		low,	low,	high,	high},
+	{in_B,	off,	out_A,		low,	high,	high,	low},
+	{in_B,	in_A,	out_A,		low,	high,	high,	low},
+	{out_B,	off,	out_A,		low,	low,	high,	high},
+	{out_B,	in_A,	out_A,		low,	low,	high,	high},
+	{off,	off,	in_B,		high,	high,	low,	high},
+	{off,	in_A,	in_B,		high,	high,	low,	low},
+	{off,	out_A,	in_B,		high,	low,	low,	high},
+	{off,	out_B,	in_B,		high,	low,	low,	high},
+	{in_A,	off,	in_B,		high,	high,	low,	low},
+	{in_A,	out_B,	in_B,		high,	low,	low,	high},
+	{out_A,	off,	in_B,		high,	low,	low,	high},
+	{out_B,	off,	in_B,		high,	low,	low,	high},
+	{out_B,	in_A,	in_B,		high,	low,	low,	high},
+	{off,	off,	out_B,		low,	high,	high,	high},
+	{off,	in_A,	out_B,		low,	high,	high,	low},
+	{off,	out_A,	out_B,		low,	low,	high,	high},
+	{off,	in_B,	out_B,		low,	high,	high,	low},
+	{in_A,	off,	out_B,		low,	high,	high,	low},
+	{in_A,	in_B,	out_B,		low,	high,	high,	low},
+	{out_A,	off,	out_B,		low,	low,	high,	high},
+	{out_A,	in_B,	out_B,		low,	low,	high,	high},
+	{in_B,	off,	out_B,		low,	high,	high,	low},
+	{in_B,	in_A,	out_B,		low,	high,	high,	low},
+	{in_B,	out_A,	out_B,		low,	low,	high,	high},
+	{end,	end,	end,	led_end, led_end, led_end, led_end}
+};
+
+static int i40e_ptp_set_pins(struct i40e_pf *pf,
+			     struct i40e_ptp_pins_settings *pins);
+
+/**
+ * i40e_ptp_extts0_work - workqueue task function
+ * @work: workqueue task structure
+ *
+ * Service for PTP external clock event
+ **/
+static void i40e_ptp_extts0_work(struct work_struct *work)
+{
+	struct i40e_pf *pf = container_of(work, struct i40e_pf,
+					  ptp_extts0_work);
+	struct i40e_hw *hw = &pf->hw;
+	struct ptp_clock_event event;
+	u32 hi, lo;
+
+	/* Event time is captured by one of the two matched registers
+	 *      PRTTSYN_EVNT_L: 32 LSB of sampled time event
+	 *      PRTTSYN_EVNT_H: 32 MSB of sampled time event
+	 * Event is defined in PRTTSYN_EVNT_0 register
+	 */
+	lo = rd32(hw, I40E_PRTTSYN_EVNT_L(0));
+	hi = rd32(hw, I40E_PRTTSYN_EVNT_H(0));
+
+	event.timestamp = (((u64)hi) << 32) | lo;
+
+	event.type = PTP_CLOCK_EXTTS;
+	event.index = 0;
+
+	/* fire event */
+	ptp_clock_event(pf->ptp_clock, &event);
+}
+
+/**
+ * i40e_is_ptp_pin_dev - check if device supports PTP pins
+ * @hw: pointer to the hardware structure
+ *
+ * Return true if device supports PTP pins, false otherwise.
+ **/
+static bool i40e_is_ptp_pin_dev(struct i40e_hw *hw)
+{
+	return hw->device_id == I40E_DEV_ID_25G_SFP28 &&
+	       hw->subsystem_device_id == I40E_SUBDEV_ID_25G_PTP_PIN;
+}
+
+/**
+ * i40e_can_do_pins - check possibility of manipulating the pins
+ * @pf: board private structure
+ *
+ * Check if all conditions are satisfied to manipulate PTP pins.
+ * Return true if pins can be manipulated or false otherwise.
+ **/
+static bool i40e_can_do_pins(struct i40e_pf *pf)
+{
+	if (!i40e_is_ptp_pin_dev(&pf->hw)) {
+		dev_warn(&pf->pdev->dev,
+			 "PTP external clock not supported.\n");
+		return false;
+	}
+
+	if (!pf->ptp_pins || pf->hw.pf_id) {
+		dev_warn(&pf->pdev->dev,
+			 "PTP PIN reading allowed for PF0 only.\n");
+		return false;
+	}
+
+	return true;
+}
+
+/**
+ * i40_ptp_reset_timing_events - Reset PTP timing events
+ * @pf: Board private structure
+ *
+ * This function resets timing events for pf.
+ **/
+static void i40_ptp_reset_timing_events(struct i40e_pf *pf)
+{
+	u32 i;
+
+	spin_lock_bh(&pf->ptp_rx_lock);
+	for (i = 0; i <= I40E_PRTTSYN_RXTIME_L_MAX_INDEX; i++) {
+		/* reading and automatically clearing timing events registers */
+		rd32(&pf->hw, I40E_PRTTSYN_RXTIME_L(i));
+		rd32(&pf->hw, I40E_PRTTSYN_RXTIME_H(i));
+		pf->latch_events[i] = 0;
+	}
+	/* reading and automatically clearing timing events registers */
+	rd32(&pf->hw, I40E_PRTTSYN_TXTIME_L);
+	rd32(&pf->hw, I40E_PRTTSYN_TXTIME_H);
+
+	pf->tx_hwtstamp_timeouts = 0;
+	pf->tx_hwtstamp_skipped = 0;
+	pf->rx_hwtstamp_cleared = 0;
+	pf->latch_event_flags = 0;
+	spin_unlock_bh(&pf->ptp_rx_lock);
+}
+
+/**
+ * i40e_ptp_verify - check pins
+ * @ptp: ptp clock
+ * @pin: pin index
+ * @func: assigned function
+ * @chan: channel
+ *
+ * Check pins consistency.
+ * Return 0 on success or error on failure.
+ **/
+static int i40e_ptp_verify(struct ptp_clock_info *ptp, unsigned int pin,
+			   enum ptp_pin_function func, unsigned int chan)
+{
+	/* TODO: implement pin checking */
+	return 0;
+}
 
 /**
  * i40e_ptp_read - Read the PHC time from the device
@@ -135,6 +357,37 @@ static int i40e_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
 	return 0;
 }
 
+/**
+ * i40e_ptp_set_1pps_signal_hw - configure 1PPS PTP signal for pins
+ * @pf: the PF private data structure
+ *
+ * Configure 1PPS signal used for PTP pins
+ **/
+static void i40e_ptp_set_1pps_signal_hw(struct i40e_pf *pf)
+{
+	struct i40e_hw *hw = &pf->hw;
+	struct timespec64 now;
+	u64 ns;
+
+	wr32(hw, I40E_PRTTSYN_AUX_0(1), 0);
+	wr32(hw, I40E_PRTTSYN_AUX_1(1), I40E_PRTTSYN_AUX_1_INSTNT);
+	wr32(hw, I40E_PRTTSYN_AUX_0(1), I40E_PRTTSYN_AUX_0_OUT_ENABLE);
+
+	i40e_ptp_read(pf, &now, NULL);
+	now.tv_sec += I40E_PTP_2_SEC_DELAY;
+	now.tv_nsec = 0;
+	ns = timespec64_to_ns(&now);
+
+	/* I40E_PRTTSYN_TGT_L(1) */
+	wr32(hw, I40E_PRTTSYN_TGT_L(1), ns & 0xFFFFFFFF);
+	/* I40E_PRTTSYN_TGT_H(1) */
+	wr32(hw, I40E_PRTTSYN_TGT_H(1), ns >> 32);
+	wr32(hw, I40E_PRTTSYN_CLKO(1), I40E_PTP_HALF_SECOND);
+	wr32(hw, I40E_PRTTSYN_AUX_1(1), I40E_PRTTSYN_AUX_1_INSTNT);
+	wr32(hw, I40E_PRTTSYN_AUX_0(1),
+	     I40E_PRTTSYN_AUX_0_OUT_ENABLE_CLK_MOD);
+}
+
 /**
  * i40e_ptp_adjtime - Adjust the PHC time
  * @ptp: The PTP clock structure
@@ -145,14 +398,35 @@ static int i40e_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
 static int i40e_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
 {
 	struct i40e_pf *pf = container_of(ptp, struct i40e_pf, ptp_caps);
-	struct timespec64 now, then;
+	struct i40e_hw *hw = &pf->hw;
 
-	then = ns_to_timespec64(delta);
 	mutex_lock(&pf->tmreg_lock);
 
-	i40e_ptp_read(pf, &now, NULL);
-	now = timespec64_add(now, then);
-	i40e_ptp_write(pf, (const struct timespec64 *)&now);
+	if (delta > -999999900LL && delta < 999999900LL) {
+		int neg_adj = 0;
+		u32 timadj;
+		u64 tohw;
+
+		if (delta < 0) {
+			neg_adj = 1;
+			tohw = -delta;
+		} else {
+			tohw = delta;
+		}
+
+		timadj = tohw & 0x3FFFFFFF;
+		if (neg_adj)
+			timadj |= I40E_ISGN;
+		wr32(hw, I40E_PRTTSYN_ADJ, timadj);
+	} else {
+		struct timespec64 then, now;
+
+		then = ns_to_timespec64(delta);
+		i40e_ptp_read(pf, &now, NULL);
+		now = timespec64_add(now, then);
+		i40e_ptp_write(pf, (const struct timespec64 *)&now);
+		i40e_ptp_set_1pps_signal_hw(pf);
+	}
 
 	mutex_unlock(&pf->tmreg_lock);
 
@@ -183,7 +457,7 @@ static int i40e_ptp_gettimex(struct ptp_clock_info *ptp, struct timespec64 *ts,
 /**
  * i40e_ptp_settime - Set the time of the PHC
  * @ptp: The PTP clock structure
- * @ts: timespec structure that holds the new time value
+ * @ts: timespec64 structure that holds the new time value
  *
  * Set the device clock to the user input value. The conversion from timespec
  * to ns happens in the write function.
@@ -201,18 +475,140 @@ static int i40e_ptp_settime(struct ptp_clock_info *ptp,
 }
 
 /**
- * i40e_ptp_feature_enable - Enable/disable ancillary features of the PHC subsystem
+ * i40e_pps_configure - configure PPS events
+ * @ptp: ptp clock
+ * @rq: clock request
+ * @on: status
+ *
+ * Configure PPS events for external clock source.
+ * Return 0 on success or error on failure.
+ **/
+static int i40e_pps_configure(struct ptp_clock_info *ptp,
+			      struct ptp_clock_request *rq,
+			      int on)
+{
+	/* TODO: implement PPS events */
+	return 0;
+}
+
+/**
+ * i40e_pin_state - determine PIN state
+ * @index: PIN index
+ * @func: function assigned to PIN
+ *
+ * Determine PIN state based on PIN index and function assigned.
+ * Return PIN state.
+ **/
+static enum i40e_ptp_gpio_pin_state i40e_pin_state(int index, int func)
+{
+	enum i40e_ptp_gpio_pin_state state = off;
+
+	if (index == 0 && func == PTP_PF_EXTTS)
+		state = in_A;
+	if (index == 1 && func == PTP_PF_EXTTS)
+		state = in_B;
+	if (index == 0 && func == PTP_PF_PEROUT)
+		state = out_A;
+	if (index == 1 && func == PTP_PF_PEROUT)
+		state = out_B;
+
+	return state;
+}
+
+/**
+ * i40e_ptp_enable_pin - enable PINs
+ * @pf: private board structure
+ * @chan: channel
+ * @func: PIN function
+ * @on: state
+ *
+ * Enable PTP pins for external clock source.
+ * Return 0 on success or error code on failure.
+ **/
+static int i40e_ptp_enable_pin(struct i40e_pf *pf, unsigned int chan,
+			       enum ptp_pin_function func, int on)
+{
+	enum i40e_ptp_gpio_pin_state *pin = NULL;
+	struct i40e_ptp_pins_settings pins;
+	int pin_index;
+
+	/* Preserve previous state of pins that we don't touch */
+	pins.sdp3_2 = pf->ptp_pins->sdp3_2;
+	pins.sdp3_3 = pf->ptp_pins->sdp3_3;
+	pins.gpio_4 = pf->ptp_pins->gpio_4;
+
+	/* To turn on the pin - find the corresponding one based on
+	 * the given index. To to turn the function off - find
+	 * which pin had it assigned. Don't use ptp_find_pin here
+	 * because it tries to lock the pincfg_mux which is locked by
+	 * ptp_pin_store() that calls here.
+	 */
+	if (on) {
+		pin_index = ptp_find_pin(pf->ptp_clock, func, chan);
+		if (pin_index < 0)
+			return -EBUSY;
+
+		switch (pin_index) {
+		case SDP3_2:
+			pin = &pins.sdp3_2;
+			break;
+		case SDP3_3:
+			pin = &pins.sdp3_3;
+			break;
+		case GPIO_4:
+			pin = &pins.gpio_4;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		*pin = i40e_pin_state(chan, func);
+	} else {
+		if (pins.sdp3_2 == i40e_pin_state(chan, func))
+			pins.sdp3_2 = off;
+		if (pins.sdp3_3 == i40e_pin_state(chan, func))
+			pins.sdp3_3 = off;
+		if (pins.gpio_4 == i40e_pin_state(chan, func))
+			pins.gpio_4 = off;
+	}
+
+	return i40e_ptp_set_pins(pf, &pins) ? -EINVAL : 0;
+}
+
+/**
+ * i40e_ptp_feature_enable - Enable external clock pins
  * @ptp: The PTP clock structure
- * @rq: The requested feature to change
- * @on: Enable/disable flag
+ * @rq: The PTP clock request structure
+ * @on: To turn feature on/off
  *
- * The XL710 does not support any of the ancillary features of the PHC
- * subsystem, so this function may just return.
+ * Setting on/off PTP PPS feature for pin.
  **/
 static int i40e_ptp_feature_enable(struct ptp_clock_info *ptp,
-				   struct ptp_clock_request *rq, int on)
+				   struct ptp_clock_request *rq,
+				   int on)
 {
-	return -EOPNOTSUPP;
+	struct i40e_pf *pf = container_of(ptp, struct i40e_pf, ptp_caps);
+
+	enum ptp_pin_function func;
+	unsigned int chan;
+
+	/* TODO: Implement flags handling for EXTTS and PEROUT */
+	switch (rq->type) {
+	case PTP_CLK_REQ_EXTTS:
+		func = PTP_PF_EXTTS;
+		chan = rq->extts.index;
+		break;
+	case PTP_CLK_REQ_PEROUT:
+		func = PTP_PF_PEROUT;
+		chan = rq->perout.index;
+		break;
+	case PTP_CLK_REQ_PPS:
+		return i40e_pps_configure(ptp, rq, on);
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return i40e_ptp_enable_pin(pf, chan, func, on);
 }
 
 /**
@@ -523,6 +919,245 @@ int i40e_ptp_get_ts_config(struct i40e_pf *pf, struct ifreq *ifr)
 		-EFAULT : 0;
 }
 
+/**
+ * i40e_ptp_free_pins - free memory used by PTP pins
+ * @pf: Board private structure
+ *
+ * Release memory allocated for PTP pins.
+ **/
+static void i40e_ptp_free_pins(struct i40e_pf *pf)
+{
+	if (pf->hw.pf_id == 0 && i40e_is_ptp_pin_dev(&pf->hw)) {
+		kfree(pf->ptp_pins);
+		kfree(pf->ptp_caps.pin_config);
+		pf->ptp_pins = NULL;
+	}
+}
+
+/**
+ * i40e_ptp_set_pin_hw - Set HW GPIO pin
+ * @hw: pointer to the hardware structure
+ * @pin: pin index
+ * @state: pin state
+ *
+ * Set status of GPIO pin for external clock handling.
+ **/
+static void i40e_ptp_set_pin_hw(struct i40e_hw *hw,
+				unsigned int pin,
+				enum i40e_ptp_gpio_pin_state state)
+{
+	switch (state) {
+	case off:
+		wr32(hw, I40E_GLGEN_GPIO_CTL(pin), 0);
+		break;
+	case in_A:
+		wr32(hw, I40E_GLGEN_GPIO_CTL(pin),
+		     I40E_GLGEN_GPIO_CTL_PORT_0_IN_TIMESYNC_0);
+		break;
+	case in_B:
+		wr32(hw, I40E_GLGEN_GPIO_CTL(pin),
+		     I40E_GLGEN_GPIO_CTL_PORT_1_IN_TIMESYNC_0);
+		break;
+	case out_A:
+		wr32(hw, I40E_GLGEN_GPIO_CTL(pin),
+		     I40E_GLGEN_GPIO_CTL_PORT_0_OUT_TIMESYNC_1);
+		break;
+	case out_B:
+		wr32(hw, I40E_GLGEN_GPIO_CTL(pin),
+		     I40E_GLGEN_GPIO_CTL_PORT_1_OUT_TIMESYNC_1);
+		break;
+	default:
+		break;
+	}
+}
+
+/**
+ * i40e_ptp_set_led_hw - Set HW GPIO led
+ * @hw: pointer to the hardware structure
+ * @led: led index
+ * @state: led state
+ *
+ * Set status of GPIO led for external clock handling.
+ **/
+static void i40e_ptp_set_led_hw(struct i40e_hw *hw,
+				unsigned int led,
+				enum i40e_ptp_led_pin_state state)
+{
+	switch (state) {
+	case low:
+		wr32(hw, I40E_GLGEN_GPIO_SET,
+		     I40E_GLGEN_GPIO_SET_DRV_SDP_DATA | led);
+		break;
+	case high:
+		wr32(hw, I40E_GLGEN_GPIO_SET,
+		     I40E_GLGEN_GPIO_SET_DRV_SDP_DATA |
+		     I40E_GLGEN_GPIO_SET_SDP_DATA_HI | led);
+		break;
+	default:
+		break;
+	}
+}
+
+/**
+ * i40e_ptp_set_pins_hw - Set HW GPIO pins
+ * @pf: Board private structure
+ *
+ * This function sets GPIO pins for PTP
+ **/
+static void i40e_ptp_set_pins_hw(struct i40e_pf *pf)
+{
+	const struct i40e_ptp_pins_settings *pins = pf->ptp_pins;
+	struct i40e_hw *hw = &pf->hw;
+
+	/* pin must be disabled before it may be used */
+	i40e_ptp_set_pin_hw(hw, I40E_SDP3_2, off);
+	i40e_ptp_set_pin_hw(hw, I40E_SDP3_3, off);
+	i40e_ptp_set_pin_hw(hw, I40E_GPIO_4, off);
+
+	i40e_ptp_set_pin_hw(hw, I40E_SDP3_2, pins->sdp3_2);
+	i40e_ptp_set_pin_hw(hw, I40E_SDP3_3, pins->sdp3_3);
+	i40e_ptp_set_pin_hw(hw, I40E_GPIO_4, pins->gpio_4);
+
+	i40e_ptp_set_led_hw(hw, I40E_LED2_0, pins->led2_0);
+	i40e_ptp_set_led_hw(hw, I40E_LED2_1, pins->led2_1);
+	i40e_ptp_set_led_hw(hw, I40E_LED3_0, pins->led3_0);
+	i40e_ptp_set_led_hw(hw, I40E_LED3_1, pins->led3_1);
+
+	dev_info(&pf->pdev->dev,
+		 "PTP configuration set to: SDP3_2: %s,  SDP3_3: %s,  GPIO_4: %s.\n",
+		 i40e_ptp_gpio_pin_state2str[pins->sdp3_2],
+		 i40e_ptp_gpio_pin_state2str[pins->sdp3_3],
+		 i40e_ptp_gpio_pin_state2str[pins->gpio_4]);
+}
+
+/**
+ * i40e_ptp_set_pins - set PTP pins in HW
+ * @pf: Board private structure
+ * @pins: PTP pins to be applied
+ *
+ * Validate and set PTP pins in HW for specific PF.
+ * Return 0 on success or negative value on error.
+ **/
+static int i40e_ptp_set_pins(struct i40e_pf *pf,
+			     struct i40e_ptp_pins_settings *pins)
+{
+	int i = 0;
+
+	if (!i40e_can_do_pins(pf))
+		return -EOPNOTSUPP;
+
+	if (pins->sdp3_2 == invalid)
+		pins->sdp3_2 = pf->ptp_pins->sdp3_2;
+	if (pins->sdp3_3 == invalid)
+		pins->sdp3_3 = pf->ptp_pins->sdp3_3;
+	if (pins->gpio_4 == invalid)
+		pins->gpio_4 = pf->ptp_pins->gpio_4;
+	while (i40e_ptp_pin_led_allowed_states[i].sdp3_2 != end) {
+		if (pins->sdp3_2 == i40e_ptp_pin_led_allowed_states[i].sdp3_2 &&
+		    pins->sdp3_3 == i40e_ptp_pin_led_allowed_states[i].sdp3_3 &&
+		    pins->gpio_4 == i40e_ptp_pin_led_allowed_states[i].gpio_4) {
+			pins->led2_0 =
+				i40e_ptp_pin_led_allowed_states[i].led2_0;
+			pins->led2_1 =
+				i40e_ptp_pin_led_allowed_states[i].led2_1;
+			pins->led3_0 =
+				i40e_ptp_pin_led_allowed_states[i].led3_0;
+			pins->led3_1 =
+				i40e_ptp_pin_led_allowed_states[i].led3_1;
+			break;
+		}
+		i++;
+	}
+	if (i40e_ptp_pin_led_allowed_states[i].sdp3_2 == end) {
+		dev_warn(&pf->pdev->dev,
+			 "Unsupported PTP pin configuration: SDP3_2: %s,  SDP3_3: %s,  GPIO_4: %s.\n",
+			 i40e_ptp_gpio_pin_state2str[pins->sdp3_2],
+			 i40e_ptp_gpio_pin_state2str[pins->sdp3_3],
+			 i40e_ptp_gpio_pin_state2str[pins->gpio_4]);
+
+		return -EPERM;
+	}
+	memcpy(pf->ptp_pins, pins, sizeof(*pins));
+	i40e_ptp_set_pins_hw(pf);
+	i40_ptp_reset_timing_events(pf);
+
+	return 0;
+}
+
+/**
+ * i40e_ptp_set_pins_ioctl - ioctl interface to set the HW timestamping
+ *                           gpio pins
+ * @pf: board private structure
+ * @ifr: ioctl data
+ *
+ * Set the current hardware timestamping pins for current PF.
+ **/
+int i40e_ptp_set_pins_ioctl(struct i40e_pf *pf, struct ifreq *ifr)
+{
+	struct i40e_ptp_pins_settings pins;
+	int err;
+
+	if (!i40e_can_do_pins(pf))
+		return -EOPNOTSUPP;
+
+	err = copy_from_user(&pins, ifr->ifr_data, sizeof(pins));
+	if (err) {
+		dev_warn(&pf->pdev->dev, "Cannot read user data during SIOCSPINS ioctl.\n");
+		return -EIO;
+	}
+
+	return i40e_ptp_set_pins(pf, &pins);
+}
+
+/**
+ * i40e_ptp_alloc_pins - allocate PTP pins structure
+ * @pf: Board private structure
+ *
+ * allocate PTP pins structure
+ **/
+int i40e_ptp_alloc_pins(struct i40e_pf *pf)
+{
+	if (pf->hw.pf_id || !i40e_is_ptp_pin_dev(&pf->hw))
+		return 0;
+
+	pf->ptp_pins =
+		kzalloc(sizeof(struct i40e_ptp_pins_settings), GFP_KERNEL);
+
+	if (!pf->ptp_pins) {
+		dev_warn(&pf->pdev->dev, "Cannot allocate memory for PTP pins structure.\n");
+		return -I40E_ERR_NO_MEMORY;
+	}
+
+	pf->ptp_pins->sdp3_2 = off;
+	pf->ptp_pins->sdp3_3 = off;
+	pf->ptp_pins->gpio_4 = off;
+	pf->ptp_pins->led2_0 = high;
+	pf->ptp_pins->led2_1 = high;
+	pf->ptp_pins->led3_0 = high;
+	pf->ptp_pins->led3_1 = high;
+
+	i40e_ptp_set_pins_hw(pf);
+
+	return 0;
+}
+
+/**
+ * i40e_ptp_get_pins - ioctl interface to read the HW timestamping gpio pins
+ * @pf: Board private structure
+ * @ifr: ioctl data
+ *
+ * Obtain the current hardware timestamping gpio pins settigs as requested.
+ **/
+int i40e_ptp_get_pins(struct i40e_pf *pf, struct ifreq *ifr)
+{
+	if (!i40e_can_do_pins(pf))
+		return -EOPNOTSUPP;
+
+	return copy_to_user(ifr->ifr_data, pf->ptp_pins,
+			    sizeof(*pf->ptp_pins))
+	       ? -EFAULT : 0;
+}
+
 /**
  * i40e_ptp_set_timestamp_mode - setup hardware for requested timestamp mode
  * @pf: Board private structure
@@ -541,6 +1176,21 @@ static int i40e_ptp_set_timestamp_mode(struct i40e_pf *pf,
 	struct i40e_hw *hw = &pf->hw;
 	u32 tsyntype, regval;
 
+	/* Selects external trigger to cause event */
+	regval = rd32(hw, I40E_PRTTSYN_AUX_0(0));
+	/* Bit 17:16 is EVNTLVL, 01B rising edge */
+	regval &= 0;
+	regval |= (1 << I40E_PRTTSYN_AUX_0_EVNTLVL_SHIFT);
+	/* regval: 0001 0000 0000 0000 0000 */
+	wr32(hw, I40E_PRTTSYN_AUX_0(0), regval);
+
+	/* Enable interrupts */
+	regval = rd32(hw, I40E_PRTTSYN_CTL0);
+	regval |= 1 << I40E_PRTTSYN_CTL0_EVENT_INT_ENA_SHIFT;
+	wr32(hw, I40E_PRTTSYN_CTL0, regval);
+
+	INIT_WORK(&pf->ptp_extts0_work, i40e_ptp_extts0_work);
+
 	/* Reserved for future extensions. */
 	if (config->flags)
 		return -EINVAL;
@@ -683,6 +1333,48 @@ int i40e_ptp_set_ts_config(struct i40e_pf *pf, struct ifreq *ifr)
 		-EFAULT : 0;
 }
 
+/**
+ * i40e_init_pin_config - initialize pins
+ * @pf: private board structure
+ *
+ * Initialize pins for external clock source.
+ * Return 0 on success or error code on failure.
+ **/
+static int i40e_init_pin_config(struct i40e_pf *pf)
+{
+	int i;
+
+	if (pf->hw.pf_id != 0)
+		return -EOPNOTSUPP;
+
+	pf->ptp_caps.n_pins = 3;
+	pf->ptp_caps.n_ext_ts = 2;
+	pf->ptp_caps.pps = 1;
+	pf->ptp_caps.n_per_out = 2;
+
+	pf->ptp_caps.pin_config = kcalloc(pf->ptp_caps.n_pins,
+					  sizeof(*pf->ptp_caps.pin_config),
+					  GFP_KERNEL);
+	if (!pf->ptp_caps.pin_config)
+		return -ENOMEM;
+
+	for (i = 0; i < pf->ptp_caps.n_pins; i++) {
+		snprintf(pf->ptp_caps.pin_config[i].name,
+			 sizeof(pf->ptp_caps.pin_config[i].name),
+			 "%s", sdp_desc[i].name);
+		pf->ptp_caps.pin_config[i].index = sdp_desc[i].index;
+		pf->ptp_caps.pin_config[i].func = PTP_PF_NONE;
+		pf->ptp_caps.pin_config[i].chan = sdp_desc[i].chan;
+	}
+
+	pf->ptp_caps.verify = i40e_ptp_verify;
+	pf->ptp_caps.enable = i40e_ptp_feature_enable;
+
+	pf->ptp_caps.pps = 1;
+
+	return 0;
+}
+
 /**
  * i40e_ptp_create_clock - Create PTP clock device for userspace
  * @pf: Board private structure
@@ -703,13 +1395,16 @@ static long i40e_ptp_create_clock(struct i40e_pf *pf)
 		sizeof(pf->ptp_caps.name) - 1);
 	pf->ptp_caps.owner = THIS_MODULE;
 	pf->ptp_caps.max_adj = 999999999;
-	pf->ptp_caps.n_ext_ts = 0;
-	pf->ptp_caps.pps = 0;
 	pf->ptp_caps.adjfreq = i40e_ptp_adjfreq;
 	pf->ptp_caps.adjtime = i40e_ptp_adjtime;
 	pf->ptp_caps.gettimex64 = i40e_ptp_gettimex;
 	pf->ptp_caps.settime64 = i40e_ptp_settime;
-	pf->ptp_caps.enable = i40e_ptp_feature_enable;
+	if (i40e_is_ptp_pin_dev(&pf->hw)) {
+		int err = i40e_init_pin_config(pf);
+
+		if (err)
+			return err;
+	}
 
 	/* Attempt to register the clock before enabling the hardware. */
 	pf->ptp_clock = ptp_clock_register(&pf->ptp_caps, &pf->pdev->dev);
@@ -839,6 +1534,8 @@ void i40e_ptp_init(struct i40e_pf *pf)
 		/* Restore the clock time based on last known value */
 		i40e_ptp_restore_hw_time(pf);
 	}
+
+	i40e_ptp_set_1pps_signal_hw(pf);
 }
 
 /**
@@ -850,6 +1547,9 @@ void i40e_ptp_init(struct i40e_pf *pf)
  **/
 void i40e_ptp_stop(struct i40e_pf *pf)
 {
+	struct i40e_hw *hw = &pf->hw;
+	u32 regval;
+
 	pf->flags &= ~I40E_FLAG_PTP;
 	pf->ptp_tx = false;
 	pf->ptp_rx = false;
@@ -868,4 +1568,19 @@ void i40e_ptp_stop(struct i40e_pf *pf)
 		dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
 			 pf->vsi[pf->lan_vsi]->netdev->name);
 	}
+
+	i40e_ptp_set_pin_hw(hw, I40E_SDP3_2, off);
+	i40e_ptp_set_pin_hw(hw, I40E_SDP3_3, off);
+	i40e_ptp_set_pin_hw(hw, I40E_GPIO_4, off);
+
+	regval = rd32(hw, I40E_PRTTSYN_AUX_0(0));
+	regval &= ~I40E_PRTTSYN_AUX_0_PTPFLAG_MASK;
+	wr32(hw, I40E_PRTTSYN_AUX_0(0), regval);
+
+	/* Disable interrupts */
+	regval = rd32(hw, I40E_PRTTSYN_CTL0);
+	regval &= ~I40E_PRTTSYN_CTL0_EVENT_INT_ENA_MASK;
+	wr32(hw, I40E_PRTTSYN_CTL0, regval);
+
+	i40e_ptp_free_pins(pf);
 }
diff --git a/drivers/net/ethernet/intel/i40e/i40e_register.h b/drivers/net/ethernet/intel/i40e/i40e_register.h
index 564df22f3f46..e97cc7638786 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_register.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_register.h
@@ -57,11 +57,18 @@
 #define I40E_GLGEN_GPIO_CTL_PRT_NUM_MASK I40E_MASK(0x3, I40E_GLGEN_GPIO_CTL_PRT_NUM_SHIFT)
 #define I40E_GLGEN_GPIO_CTL_PRT_NUM_NA_SHIFT 3
 #define I40E_GLGEN_GPIO_CTL_PRT_NUM_NA_MASK I40E_MASK(0x1, I40E_GLGEN_GPIO_CTL_PRT_NUM_NA_SHIFT)
+#define I40E_GLGEN_GPIO_CTL_PIN_DIR_SHIFT 4
+#define I40E_GLGEN_GPIO_CTL_TRI_CTL_SHIFT 5
+#define I40E_GLGEN_GPIO_CTL_OUT_CTL_SHIFT 6
 #define I40E_GLGEN_GPIO_CTL_PIN_FUNC_SHIFT 7
 #define I40E_GLGEN_GPIO_CTL_PIN_FUNC_MASK I40E_MASK(0x7, I40E_GLGEN_GPIO_CTL_PIN_FUNC_SHIFT)
 #define I40E_GLGEN_GPIO_CTL_LED_BLINK_SHIFT 11
 #define I40E_GLGEN_GPIO_CTL_LED_MODE_SHIFT 12
 #define I40E_GLGEN_GPIO_CTL_LED_MODE_MASK I40E_MASK(0x1F, I40E_GLGEN_GPIO_CTL_LED_MODE_SHIFT)
+#define I40E_GLGEN_GPIO_CTL_PHY_PIN_NAME_SHIFT 20
+#define I40E_GLGEN_GPIO_SET 0x00088184 /* Reset: POR */
+#define I40E_GLGEN_GPIO_SET_SDP_DATA_SHIFT 5
+#define I40E_GLGEN_GPIO_SET_DRIVE_SDP_SHIFT 6
 #define I40E_GLGEN_MDIO_I2C_SEL(_i) (0x000881C0 + ((_i) * 4)) /* _i=0...3 */ /* Reset: POR */
 #define I40E_GLGEN_MSCA(_i) (0x0008818C + ((_i) * 4)) /* _i=0...3 */ /* Reset: POR */
 #define I40E_GLGEN_MSCA_MDIADD_SHIFT 0
@@ -570,6 +577,8 @@
 #define I40E_PRTTSYN_CTL0 0x001E4200 /* Reset: GLOBR */
 #define I40E_PRTTSYN_CTL0_TXTIME_INT_ENA_SHIFT 1
 #define I40E_PRTTSYN_CTL0_TXTIME_INT_ENA_MASK I40E_MASK(0x1, I40E_PRTTSYN_CTL0_TXTIME_INT_ENA_SHIFT)
+#define I40E_PRTTSYN_CTL0_EVENT_INT_ENA_SHIFT 2
+#define I40E_PRTTSYN_CTL0_EVENT_INT_ENA_MASK I40E_MASK(0x1, I40E_PRTTSYN_CTL0_EVENT_INT_ENA_SHIFT)
 #define I40E_PRTTSYN_CTL0_PF_ID_SHIFT 8
 #define I40E_PRTTSYN_CTL0_PF_ID_MASK I40E_MASK(0xF, I40E_PRTTSYN_CTL0_PF_ID_SHIFT)
 #define I40E_PRTTSYN_CTL0_TSYNENA_SHIFT 31
@@ -588,7 +597,10 @@
 #define I40E_PRTTSYN_INC_L 0x001E4040 /* Reset: GLOBR */
 #define I40E_PRTTSYN_RXTIME_H(_i) (0x00085040 + ((_i) * 32)) /* _i=0...3 */ /* Reset: CORER */
 #define I40E_PRTTSYN_RXTIME_L(_i) (0x000850C0 + ((_i) * 32)) /* _i=0...3 */ /* Reset: CORER */
+#define I40E_PRTTSYN_RXTIME_L_MAX_INDEX 3
 #define I40E_PRTTSYN_STAT_0 0x001E4220 /* Reset: GLOBR */
+#define I40E_PRTTSYN_STAT_0_EVENT0_SHIFT 0
+#define I40E_PRTTSYN_STAT_0_EVENT0_MASK I40E_MASK(0x1, I40E_PRTTSYN_STAT_0_EVENT0_SHIFT)
 #define I40E_PRTTSYN_STAT_0_TXTIME_SHIFT 4
 #define I40E_PRTTSYN_STAT_0_TXTIME_MASK I40E_MASK(0x1, I40E_PRTTSYN_STAT_0_TXTIME_SHIFT)
 #define I40E_PRTTSYN_STAT_1 0x00085140 /* Reset: CORER */
@@ -596,6 +608,20 @@
 #define I40E_PRTTSYN_TIME_L 0x001E4100 /* Reset: GLOBR */
 #define I40E_PRTTSYN_TXTIME_H 0x001E41E0 /* Reset: GLOBR */
 #define I40E_PRTTSYN_TXTIME_L 0x001E41C0 /* Reset: GLOBR */
+#define I40E_PRTTSYN_EVNT_H(_i) (0x001E40C0 + ((_i) * 32)) /* _i=0...1 */ /* Reset: GLOBR */
+#define I40E_PRTTSYN_EVNT_L(_i) (0x001E4080 + ((_i) * 32)) /* _i=0...1 */ /* Reset: GLOBR */
+#define I40E_PRTTSYN_AUX_0(_i) (0x001E42A0 + ((_i) * 32)) /* _i=0...1 */ /* Reset: GLOBR */
+#define I40E_PRTTSYN_AUX_0_OUT_ENA_SHIFT 0
+#define I40E_PRTTSYN_AUX_0_OUTMOD_SHIFT 1
+#define I40E_PRTTSYN_AUX_0_EVNTLVL_SHIFT 16
+#define I40E_PRTTSYN_AUX_0_PTPFLAG_SHIFT 17
+#define I40E_PRTTSYN_AUX_0_PTPFLAG_MASK I40E_MASK(0x1, I40E_PRTTSYN_AUX_0_PTPFLAG_SHIFT)
+#define I40E_PRTTSYN_AUX_1(_i) (0x001E42E0 + ((_i) * 32)) /* _i=0...1 */ /* Reset: GLOBR */
+#define I40E_PRTTSYN_AUX_1_INSTNT_SHIFT 0
+#define I40E_PRTTSYN_TGT_H(_i) (0x001E4180 + ((_i) * 32)) /* _i=0...1 */ /* Reset: GLOBR */
+#define I40E_PRTTSYN_TGT_L(_i) (0x001E4140 + ((_i) * 32)) /* _i=0...1 */ /* Reset: GLOBR */
+#define I40E_PRTTSYN_CLKO(_i) (0x001E4240 + ((_i) * 32)) /* _i=0...1 */ /* Reset: GLOBR */
+#define I40E_PRTTSYN_ADJ 0x001E4280 /* Reset: GLOBR */
 #define I40E_GL_MDET_RX 0x0012A510 /* Reset: CORER */
 #define I40E_GL_MDET_RX_FUNCTION_SHIFT 0
 #define I40E_GL_MDET_RX_FUNCTION_MASK I40E_MASK(0xFF, I40E_GL_MDET_RX_FUNCTION_SHIFT)
@@ -653,9 +679,6 @@
 #define I40E_VF_ATQT1 0x00008400 /* Reset: EMPR */
 #define I40E_VFQF_HLUT_MAX_INDEX 15
 
-
-
-
 #define I40E_PFINT_DYN_CTL0_WB_ON_ITR_SHIFT 30
 #define I40E_PFINT_DYN_CTL0_WB_ON_ITR_MASK I40E_MASK(0x1, I40E_PFINT_DYN_CTL0_WB_ON_ITR_SHIFT)
 #define I40E_PFINT_DYN_CTLN_WB_ON_ITR_SHIFT 30
@@ -666,8 +689,6 @@
 
 #define I40E_GLNVM_ULD 0x000B6008 /* Reset: POR */
 
-
-
 #define I40E_GLQF_HASH_INSET(_i, _j) (0x00267600 + ((_i) * 4 + (_j) * 8)) /* _i=0...1, _j=0...63 */ /* Reset: CORER */
 #define I40E_GLQF_ORT(_i) (0x00268900 + ((_i) * 4)) /* _i=0...63 */ /* Reset: CORER */
 #define I40E_GLQF_ORT_PIT_INDX_SHIFT 0
-- 
2.26.2

[net-next 2/4] i40e: remove redundant assignment

[Tony Nguyen]

From: Marek Majtyka <marekx.majtyka@intel.com>

Remove a redundant assignment of the software ring pointer in the i40e
driver. The variable is assigned twice with no use in between, so just
get rid of the first occurrence.

Fixes: 3b4f0b66c2b3 ("i40e, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOL")
Signed-off-by: Marek Majtyka <marekx.majtyka@intel.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_xsk.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_xsk.c b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
index 567fd67e900e..67febc7b6798 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_xsk.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
@@ -311,7 +311,6 @@ int i40e_clean_rx_irq_zc(struct i40e_ring *rx_ring, int budget)
 			continue;
 		}
 
-		bi = i40e_rx_bi(rx_ring, rx_ring->next_to_clean);
 		size = (qword & I40E_RXD_QW1_LENGTH_PBUF_MASK) >>
 		       I40E_RXD_QW1_LENGTH_PBUF_SHIFT;
 		if (!size)
-- 
2.26.2

[net-next 3/4] i40e: report correct VF link speed when link state is set to enable

[Tony Nguyen]

From: Stefan Assmann <sassmann@kpanic.de>

When the virtual link state was set to "enable" ethtool would report
link speed as 40000Mb/s regardless of the underlying device.
Report the correct link speed.

Example from a XXV710 NIC.
Before:
$ ip link set ens3f0 vf 0 state auto
$  ethtool enp8s2 | grep Speed
        Speed: 25000Mb/s
$ ip link set ens3f0 vf 0 state enable
$ ethtool enp8s2 | grep Speed
        Speed: 40000Mb/s
After:
$ ip link set ens3f0 vf 0 state auto
$  ethtool enp8s2 | grep Speed
        Speed: 25000Mb/s
$ ip link set ens3f0 vf 0 state enable
$ ethtool enp8s2 | grep Speed
        Speed: 25000Mb/s

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 4919d22d7b6b..2532f8eed6a8 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -63,7 +63,7 @@ static void i40e_vc_notify_vf_link_state(struct i40e_vf *vf)
 	} else if (vf->link_forced) {
 		pfe.event_data.link_event.link_status = vf->link_up;
 		pfe.event_data.link_event.link_speed =
-			(vf->link_up ? VIRTCHNL_LINK_SPEED_40GB : 0);
+			(vf->link_up ? i40e_virtchnl_link_speed(ls->link_speed) : 0);
 	} else {
 		pfe.event_data.link_event.link_status =
 			ls->link_info & I40E_AQ_LINK_UP;
@@ -4437,6 +4437,7 @@ int i40e_ndo_set_vf_link_state(struct net_device *netdev, int vf_id, int link)
 {
 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 	struct i40e_pf *pf = np->vsi->back;
+	struct i40e_link_status *ls = &pf->hw.phy.link_info;
 	struct virtchnl_pf_event pfe;
 	struct i40e_hw *hw = &pf->hw;
 	struct i40e_vf *vf;
@@ -4474,7 +4475,7 @@ int i40e_ndo_set_vf_link_state(struct net_device *netdev, int vf_id, int link)
 		vf->link_forced = true;
 		vf->link_up = true;
 		pfe.event_data.link_event.link_status = true;
-		pfe.event_data.link_event.link_speed = VIRTCHNL_LINK_SPEED_40GB;
+		pfe.event_data.link_event.link_speed = i40e_virtchnl_link_speed(ls->link_speed);
 		break;
 	case IFLA_VF_LINK_STATE_DISABLE:
 		vf->link_forced = true;
-- 
2.26.2

[net-next 4/4] igbvf: Refactor traces

[Tony Nguyen]

From: Karen Sornek <karen.sornek@intel.com>

Refactoring "PF still resetting" and changing "Failed
 to add vlan id" to "Vlan id is not added"
messages because previous version looked like a bug
- it informed about changes that worked as
designed but might confuse users

Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/igbvf/netdev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
index ee9f8c1dca83..30fdea24e94a 100644
--- a/drivers/net/ethernet/intel/igbvf/netdev.c
+++ b/drivers/net/ethernet/intel/igbvf/netdev.c
@@ -1236,7 +1236,7 @@ static int igbvf_vlan_rx_add_vid(struct net_device *netdev,
 	spin_lock_bh(&hw->mbx_lock);
 
 	if (hw->mac.ops.set_vfta(hw, vid, true)) {
-		dev_err(&adapter->pdev->dev, "Failed to add vlan id %d\n", vid);
+		dev_warn(&adapter->pdev->dev, "Vlan id %d\n is not added", vid);
 		spin_unlock_bh(&hw->mbx_lock);
 		return -EINVAL;
 	}
@@ -1520,7 +1520,7 @@ static void igbvf_reset(struct igbvf_adapter *adapter)
 
 	/* Allow time for pending master requests to run */
 	if (mac->ops.reset_hw(hw))
-		dev_err(&adapter->pdev->dev, "PF still resetting\n");
+		dev_warn(&adapter->pdev->dev, "PF still resetting\n");
 
 	mac->ops.init_hw(hw);
 
-- 
2.26.2

Re: [net-next 1/4] i40e: add support for PTP external synchronization clock

[Jakub Kicinski]

On Fri, 13 Nov 2020 16:10:54 -0800 Tony Nguyen wrote:
> From: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
> 
> Add support for external synchronization clock via GPIOs.
> 1PPS signals are handled via the dedicated 3 GPIOs: SDP3_2,
> SDP3_3 and GPIO_4.
> Previously it was not possible to use the external PTP
> synchronization clock.

Please _always_ CC Richard on PTP changes.


> diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
> index 537300e762f0..8f5eecbff3d6 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e.h
> +++ b/drivers/net/ethernet/intel/i40e/i40e.h
> @@ -196,6 +196,11 @@ enum i40e_fd_stat_idx {
>  #define I40E_FD_ATR_TUNNEL_STAT_IDX(pf_id) \
>  			(I40E_FD_STAT_PF_IDX(pf_id) + I40E_FD_STAT_ATR_TUNNEL)
>  
> +/* get PTP pins for ioctl */
> +#define SIOCGPINS	(SIOCDEVPRIVATE + 0)
> +/* set PTP pins for ioctl */
> +#define SIOCSPINS	(SIOCDEVPRIVATE + 1)

This is unexpected.. is it really normal to declare private device
IOCTLs to configure PPS pins? Or are you just exposing this so you're
able to play with GPIOs from user space?

>  /* The following structure contains the data parsed from the user-defined
>   * field of the ethtool_rx_flow_spec structure.
>   */
> @@ -344,7 +349,6 @@ struct i40e_ddp_old_profile_list {
>  					     I40E_FLEX_SET_FSIZE(fsize) | \
>  					     I40E_FLEX_SET_SRC_WORD(src))
>  
> -

Please move all the empty line removal to a separate patch.

>  #define I40E_MAX_FLEX_SRC_OFFSET 0x1F
>  
>  /* macros related to GLQF_ORT */

> @@ -2692,7 +2692,15 @@ int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
>  	case SIOCGHWTSTAMP:
>  		return i40e_ptp_get_ts_config(pf, ifr);
>  	case SIOCSHWTSTAMP:
> +		if (!capable(CAP_SYS_ADMIN))
> +			return -EACCES;

If you needed this, this should be a fix for net. But you don't, core
checks it.

>  		return i40e_ptp_set_ts_config(pf, ifr);
> +	case SIOCSPINS:
> +		if (!capable(CAP_SYS_ADMIN))
> +			return -EACCES;
> +		return i40e_ptp_set_pins_ioctl(pf, ifr);
> +	case SIOCGPINS:
> +		return i40e_ptp_get_pins(pf, ifr);
>  	default:
>  		return -EOPNOTSUPP;
>  	}

Re: [net-next 1/4] i40e: add support for PTP external synchronization clock

[Richard Cochran]

On Mon, Nov 16, 2020 at 05:07:37PM -0800, Jakub Kicinski wrote:
> On Fri, 13 Nov 2020 16:10:54 -0800 Tony Nguyen wrote:

> > +/* get PTP pins for ioctl */
> > +#define SIOCGPINS	(SIOCDEVPRIVATE + 0)
> > +/* set PTP pins for ioctl */
> > +#define SIOCSPINS	(SIOCDEVPRIVATE + 1)
> 
> This is unexpected.. is it really normal to declare private device
> IOCTLs to configure PPS pins? Or are you just exposing this so you're
> able to play with GPIOs from user space?

I missed the full patch, but I'd like to point out that we already
have a rather fully featured pin control API.  If something is missing
from that API, then please, let's discuss it!

Thanks,
Richard

RE: [net-next 1/4] i40e: add support for PTP external synchronization clock

[Kwapulinski, Piotr]

>-----Original Message-----
>From: Jakub Kicinski <kuba@kernel.org>
>Sent: Tuesday, November 17, 2020 2:08 AM
>To: Nguyen, Anthony L <anthony.l.nguyen@intel.com>
>Cc: davem@davemloft.net; Kwapulinski, Piotr <piotr.kwapulinski@intel.com>; netdev@vger.kernel.org; sassmann@redhat.com; Loktionov, Aleksandr <aleksandr.loktionov@intel.com>; Kubalewski, Arkadiusz <arkadiusz.kubalewski@intel.com>; Andrew Bowers <andrewx.bowers@intel.com>; Richard Cochran <richardcochran@gmail.com>; Vladimir Oltean <olteanv@gmail.com>
>Subject: Re: [net-next 1/4] i40e: add support for PTP external synchronization clock
>
>On Fri, 13 Nov 2020 16:10:54 -0800 Tony Nguyen wrote:
>> From: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
>>
>> Add support for external synchronization clock via GPIOs.
>> 1PPS signals are handled via the dedicated 3 GPIOs: SDP3_2,
>> SDP3_3 and GPIO_4.
>> Previously it was not possible to use the external PTP synchronization
>> clock.
>
>Please _always_ CC Richard on PTP changes.

Sure

>
>
>> diff --git a/drivers/net/ethernet/intel/i40e/i40e.h
>> b/drivers/net/ethernet/intel/i40e/i40e.h
>> index 537300e762f0..8f5eecbff3d6 100644
>> --- a/drivers/net/ethernet/intel/i40e/i40e.h
>> +++ b/drivers/net/ethernet/intel/i40e/i40e.h
>> @@ -196,6 +196,11 @@ enum i40e_fd_stat_idx {  #define
>> I40E_FD_ATR_TUNNEL_STAT_IDX(pf_id) \
>>                      (I40E_FD_STAT_PF_IDX(pf_id) + I40E_FD_STAT_ATR_TUNNEL)
>>
>> +/* get PTP pins for ioctl */
>> +#define SIOCGPINS   (SIOCDEVPRIVATE + 0)
>> +/* set PTP pins for ioctl */
>> +#define SIOCSPINS   (SIOCDEVPRIVATE + 1)
>
>This is unexpected.. is it really normal to declare private device IOCTLs to configure PPS pins? Or are you just exposing this so you're able to play with GPIOs from user space?

Right, this should not go upstream.

>
>>  /* The following structure contains the data parsed from the user-defined
>>   * field of the ethtool_rx_flow_spec structure.
>>   */
>> @@ -344,7 +349,6 @@ struct i40e_ddp_old_profile_list {
>>                                           I40E_FLEX_SET_FSIZE(fsize) | \
>>                                           I40E_FLEX_SET_SRC_WORD(src))
>>
>> -
>
>Please move all the empty line removal to a separate patch.
>
>>  #define I40E_MAX_FLEX_SRC_OFFSET 0x1F
>>
>>  /* macros related to GLQF_ORT */
>
>> @@ -2692,7 +2692,15 @@ int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
>>      case SIOCGHWTSTAMP:
>>              return i40e_ptp_get_ts_config(pf, ifr);
>>      case SIOCSHWTSTAMP:
>> +            if (!capable(CAP_SYS_ADMIN))
>> +                    return -EACCES;
>
>If you needed this, this should be a fix for net. But you don't, core checks it.
>
>>              return i40e_ptp_set_ts_config(pf, ifr);
>> +    case SIOCSPINS:
>> +            if (!capable(CAP_SYS_ADMIN))
>> +                    return -EACCES;
>> +            return i40e_ptp_set_pins_ioctl(pf, ifr);
>> +    case SIOCGPINS:
>> +            return i40e_ptp_get_pins(pf, ifr);
>>      default:
>>              return -EOPNOTSUPP;
>>      }
>

I'll provide and updated patch.
Thank you for review.