Re: [PATCH 2/2] net: ks8851: Register MDIO bus and the internal PHY

[Andrew Lunn <andrew@lunn.ch>]

On Sun, Jan 03, 2021 at 01:58:09PM +0100, Marek Vasut wrote:
> On 12/30/20 5:00 PM, Andrew Lunn wrote:
> > > +static int ks8851_mdio_read(struct mii_bus *bus, int phy_id, int reg)
> > > +{
> > > +	struct ks8851_net *ks = bus->priv;
> > > +
> > > +	if (phy_id != 0)
> > > +		return 0xffffffff;
> > > +
> > 
> > Please check for C45 and return -EOPNOTSUPP.
> 
> The ks8851_reg_read() does all the register checking already.

Not really.

static int ks8851_phy_read(struct net_device *dev, int phy_addr, int reg)
{
	struct ks8851_net *ks = netdev_priv(dev);
	unsigned long flags;
	int ksreg;
	int result;

	ksreg = ks8851_phy_reg(reg);
	if (!ksreg)
		return 0x0;	/* no error return allowed, so use zero */

	ks8851_lock(ks, &flags);
	result = ks8851_rdreg16(ks, ksreg);
	ks8851_unlock(ks, &flags);

	return result;
}

static int ks8851_phy_reg(int reg)
{
	switch (reg) {
	case MII_BMCR:
		return KS_P1MBCR;
	case MII_BMSR:
		return KS_P1MBSR;
	case MII_PHYSID1:
		return KS_PHY1ILR;
	case MII_PHYSID2:
		return KS_PHY1IHR;
	case MII_ADVERTISE:
		return KS_P1ANAR;
	case MII_LPA:
		return KS_P1ANLPR;
	}

	return 0x0;
}

So a C45 reg will cause 0 to be returned, not -EOPNOTSUPP.

   Andrew