netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2] net: phy: realtek: Add support for RTL9000AA/AN
@ 2021-01-10  8:52 Yuusuke Ashizuka
  2021-01-10 10:23 ` Russell King - ARM Linux admin
  2021-01-10 16:22 ` Andrew Lunn
  0 siblings, 2 replies; 11+ messages in thread
From: Yuusuke Ashizuka @ 2021-01-10  8:52 UTC (permalink / raw)
  To: andrew, hkallweit1, linux, davem, kuba; +Cc: netdev, ashiduka, torii.ken1

RTL9000AA/AN as 100BASE-T1 is following:
- 100 Mbps
- Full duplex
- Link Status Change Interrupt

Signed-off-by: Yuusuke Ashizuka <ashiduka@fujitsu.com>
Signed-off-by: Torii Kenichi <torii.ken1@fujitsu.com>
---
v2:
- Remove the use of .ack_interrupt()
- Implement .handle_interrupt() callback
- Remove the slash from driver name
---
 drivers/net/phy/realtek.c | 81 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 99ecd6c4c15a..1312e0eeecfa 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -60,6 +60,9 @@
 #define RTL_LPADV_5000FULL			BIT(6)
 #define RTL_LPADV_2500FULL			BIT(5)
 
+#define RTL9000A_GINMR				0x14
+#define RTL9000A_GINMR_LINK_STATUS		BIT(4)
+
 #define RTLGEN_SPEED_MASK			0x0630
 
 #define RTL_GENERIC_PHYID			0x001cc800
@@ -655,6 +658,71 @@ static int rtlgen_resume(struct phy_device *phydev)
 	return ret;
 }
 
+static int rtl9000a_config_init(struct phy_device *phydev)
+{
+	phydev->autoneg = AUTONEG_DISABLE;
+	phydev->speed = SPEED_100;
+	phydev->duplex = DUPLEX_FULL;
+
+	return 0;
+}
+
+static int rtl9000a_config_aneg(struct phy_device *phydev)
+{
+	return 0;
+}
+
+static int rtl9000a_ack_interrupt(struct phy_device *phydev)
+{
+	int err;
+
+	err = phy_read(phydev, RTL8211F_INSR);
+
+	return (err < 0) ? err : 0;
+}
+
+static int rtl9000a_config_intr(struct phy_device *phydev)
+{
+	u16 val;
+	int err;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = rtl9000a_ack_interrupt(phydev);
+		if (err)
+			return err;
+
+		val = (u16)~RTL9000A_GINMR_LINK_STATUS;
+		err = phy_write_paged(phydev, 0xa42, RTL9000A_GINMR, val);
+	} else {
+		val = ~0;
+		err = phy_write_paged(phydev, 0xa42, RTL9000A_GINMR, val);
+		if (err)
+			return err;
+
+		err = rtl9000a_ack_interrupt(phydev);
+	}
+
+	return phy_write_paged(phydev, 0xa42, RTL9000A_GINMR, val);
+}
+
+static irqreturn_t rtl9000a_handle_interrupt(struct phy_device *phydev)
+{
+	int irq_status;
+
+	irq_status = phy_read(phydev, RTL8211F_INSR);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	if (!(irq_status & RTL8211F_INER_LINK_STATUS))
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
 static struct phy_driver realtek_drvs[] = {
 	{
 		PHY_ID_MATCH_EXACT(0x00008201),
@@ -823,6 +891,19 @@ static struct phy_driver realtek_drvs[] = {
 		.handle_interrupt = genphy_handle_interrupt_no_ack,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
+	}, {
+		PHY_ID_MATCH_EXACT(0x001ccb00),
+		.name		= "RTL9000AA_RTL9000AN Ethernet",
+		.features       = PHY_BASIC_T1_FEATURES,
+		.config_init	= rtl9000a_config_init,
+		.config_aneg	= rtl9000a_config_aneg,
+		.read_status	= genphy_update_link,
+		.config_intr	= rtl9000a_config_intr,
+		.handle_interrupt = rtl9000a_handle_interrupt,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.read_page	= rtl821x_read_page,
+		.write_page	= rtl821x_write_page,
 	},
 };
 
-- 
2.29.2


^ permalink raw reply related	[flat|nested] 11+ messages in thread
end of thread, other threads:[~2021-01-20 12:53 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-10  8:52 [PATCH v2] net: phy: realtek: Add support for RTL9000AA/AN Yuusuke Ashizuka
2021-01-10 10:23 ` Russell King - ARM Linux admin
2021-01-10 16:22 ` Andrew Lunn
2021-01-12  5:14   ` ashiduka
2021-01-12 13:54     ` Andrew Lunn
2021-01-13  1:10       ` ashiduka
2021-01-14  8:38   ` ashiduka
2021-01-14 23:04     ` Andrew Lunn
2021-01-18 10:17       ` ashiduka
2021-01-19 15:46         ` Andrew Lunn
2021-01-20 11:32           ` ashiduka

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).