* Re: [PATCH] f2fs: introduce hot_data_age_threshold and warm_data_age_threshold mount opt
[not found] <20221206063616.68522-1-frank.li@vivo.com>
@ 2022-12-07 9:57 ` kernel test robot
0 siblings, 0 replies; only message in thread
From: kernel test robot @ 2022-12-07 9:57 UTC (permalink / raw)
To: Yangtao Li, jaegeuk, chao
Cc: oe-kbuild-all, linux-f2fs-devel, linux-kernel, qixiaoyu1,
xiongping1, Yangtao Li
[-- Attachment #1: Type: text/plain, Size: 17687 bytes --]
Hi Yangtao,
I love your patch! Perhaps something to improve:
[auto build test WARNING on jaegeuk-f2fs/dev-test]
[cannot apply to jaegeuk-f2fs/dev linus/master v6.1-rc8 next-20221207]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Yangtao-Li/f2fs-introduce-hot_data_age_threshold-and-warm_data_age_threshold-mount-opt/20221206-143754
base: https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs.git dev-test
patch link: https://lore.kernel.org/r/20221206063616.68522-1-frank.li%40vivo.com
patch subject: [PATCH] f2fs: introduce hot_data_age_threshold and warm_data_age_threshold mount opt
reproduce:
# https://github.com/intel-lab-lkp/linux/commit/91f112832ffd9afa43d01f4acae672c7dfae45b6
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Yangtao-Li/f2fs-introduce-hot_data_age_threshold-and-warm_data_age_threshold-mount-opt/20221206-143754
git checkout 91f112832ffd9afa43d01f4acae672c7dfae45b6
make menuconfig
# enable CONFIG_COMPILE_TEST, CONFIG_WARN_MISSING_DOCUMENTS, CONFIG_WARN_ABI_ERRORS
make htmldocs
If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> Documentation/filesystems/f2fs.rst:354: WARNING: Malformed table.
vim +354 Documentation/filesystems/f2fs.rst
106
107
108 ======================== ============================================================
109 background_gc=%s Turn on/off cleaning operations, namely garbage
110 collection, triggered in background when I/O subsystem is
111 idle. If background_gc=on, it will turn on the garbage
112 collection and if background_gc=off, garbage collection
113 will be turned off. If background_gc=sync, it will turn
114 on synchronous garbage collection running in background.
115 Default value for this option is on. So garbage
116 collection is on by default.
117 gc_merge When background_gc is on, this option can be enabled to
118 let background GC thread to handle foreground GC requests,
119 it can eliminate the sluggish issue caused by slow foreground
120 GC operation when GC is triggered from a process with limited
121 I/O and CPU resources.
122 nogc_merge Disable GC merge feature.
123 disable_roll_forward Disable the roll-forward recovery routine
124 norecovery Disable the roll-forward recovery routine, mounted read-
125 only (i.e., -o ro,disable_roll_forward)
126 discard/nodiscard Enable/disable real-time discard in f2fs, if discard is
127 enabled, f2fs will issue discard/TRIM commands when a
128 segment is cleaned.
129 no_heap Disable heap-style segment allocation which finds free
130 segments for data from the beginning of main area, while
131 for node from the end of main area.
132 nouser_xattr Disable Extended User Attributes. Note: xattr is enabled
133 by default if CONFIG_F2FS_FS_XATTR is selected.
134 noacl Disable POSIX Access Control List. Note: acl is enabled
135 by default if CONFIG_F2FS_FS_POSIX_ACL is selected.
136 active_logs=%u Support configuring the number of active logs. In the
137 current design, f2fs supports only 2, 4, and 6 logs.
138 Default number is 6.
139 disable_ext_identify Disable the extension list configured by mkfs, so f2fs
140 is not aware of cold files such as media files.
141 inline_xattr Enable the inline xattrs feature.
142 noinline_xattr Disable the inline xattrs feature.
143 inline_xattr_size=%u Support configuring inline xattr size, it depends on
144 flexible inline xattr feature.
145 inline_data Enable the inline data feature: Newly created small (<~3.4k)
146 files can be written into inode block.
147 inline_dentry Enable the inline dir feature: data in newly created
148 directory entries can be written into inode block. The
149 space of inode block which is used to store inline
150 dentries is limited to ~3.4k.
151 noinline_dentry Disable the inline dentry feature.
152 flush_merge Merge concurrent cache_flush commands as much as possible
153 to eliminate redundant command issues. If the underlying
154 device handles the cache_flush command relatively slowly,
155 recommend to enable this option.
156 nobarrier This option can be used if underlying storage guarantees
157 its cached data should be written to the novolatile area.
158 If this option is set, no cache_flush commands are issued
159 but f2fs still guarantees the write ordering of all the
160 data writes.
161 barrier If this option is set, cache_flush commands are allowed to be
162 issued.
163 fastboot This option is used when a system wants to reduce mount
164 time as much as possible, even though normal performance
165 can be sacrificed.
166 extent_cache Enable an extent cache based on rb-tree, it can cache
167 as many as extent which map between contiguous logical
168 address and physical address per inode, resulting in
169 increasing the cache hit ratio. Set by default.
170 noextent_cache Disable an extent cache based on rb-tree explicitly, see
171 the above extent_cache mount option.
172 noinline_data Disable the inline data feature, inline data feature is
173 enabled by default.
174 data_flush Enable data flushing before checkpoint in order to
175 persist data of regular and symlink.
176 reserve_root=%d Support configuring reserved space which is used for
177 allocation from a privileged user with specified uid or
178 gid, unit: 4KB, the default limit is 0.2% of user blocks.
179 resuid=%d The user ID which may use the reserved blocks.
180 resgid=%d The group ID which may use the reserved blocks.
181 fault_injection=%d Enable fault injection in all supported types with
182 specified injection rate.
183 fault_type=%d Support configuring fault injection type, should be
184 enabled with fault_injection option, fault type value
185 is shown below, it supports single or combined type.
186
187 =================== ===========
188 Type_Name Type_Value
189 =================== ===========
190 FAULT_KMALLOC 0x000000001
191 FAULT_KVMALLOC 0x000000002
192 FAULT_PAGE_ALLOC 0x000000004
193 FAULT_PAGE_GET 0x000000008
194 FAULT_ALLOC_BIO 0x000000010 (obsolete)
195 FAULT_ALLOC_NID 0x000000020
196 FAULT_ORPHAN 0x000000040
197 FAULT_BLOCK 0x000000080
198 FAULT_DIR_DEPTH 0x000000100
199 FAULT_EVICT_INODE 0x000000200
200 FAULT_TRUNCATE 0x000000400
201 FAULT_READ_IO 0x000000800
202 FAULT_CHECKPOINT 0x000001000
203 FAULT_DISCARD 0x000002000
204 FAULT_WRITE_IO 0x000004000
205 FAULT_SLAB_ALLOC 0x000008000
206 FAULT_DQUOT_INIT 0x000010000
207 FAULT_LOCK_OP 0x000020000
208 FAULT_BLKADDR 0x000040000
209 =================== ===========
210 mode=%s Control block allocation mode which supports "adaptive"
211 and "lfs". In "lfs" mode, there should be no random
212 writes towards main area.
213 "fragment:segment" and "fragment:block" are newly added here.
214 These are developer options for experiments to simulate filesystem
215 fragmentation/after-GC situation itself. The developers use these
216 modes to understand filesystem fragmentation/after-GC condition well,
217 and eventually get some insights to handle them better.
218 In "fragment:segment", f2fs allocates a new segment in ramdom
219 position. With this, we can simulate the after-GC condition.
220 In "fragment:block", we can scatter block allocation with
221 "max_fragment_chunk" and "max_fragment_hole" sysfs nodes.
222 We added some randomness to both chunk and hole size to make
223 it close to realistic IO pattern. So, in this mode, f2fs will allocate
224 1..<max_fragment_chunk> blocks in a chunk and make a hole in the
225 length of 1..<max_fragment_hole> by turns. With this, the newly
226 allocated blocks will be scattered throughout the whole partition.
227 Note that "fragment:block" implicitly enables "fragment:segment"
228 option for more randomness.
229 Please, use these options for your experiments and we strongly
230 recommend to re-format the filesystem after using these options.
231 io_bits=%u Set the bit size of write IO requests. It should be set
232 with "mode=lfs".
233 usrquota Enable plain user disk quota accounting.
234 grpquota Enable plain group disk quota accounting.
235 prjquota Enable plain project quota accounting.
236 usrjquota=<file> Appoint specified file and type during mount, so that quota
237 grpjquota=<file> information can be properly updated during recovery flow,
238 prjjquota=<file> <quota file>: must be in root directory;
239 jqfmt=<quota type> <quota type>: [vfsold,vfsv0,vfsv1].
240 offusrjquota Turn off user journalled quota.
241 offgrpjquota Turn off group journalled quota.
242 offprjjquota Turn off project journalled quota.
243 quota Enable plain user disk quota accounting.
244 noquota Disable all plain disk quota option.
245 alloc_mode=%s Adjust block allocation policy, which supports "reuse"
246 and "default".
247 fsync_mode=%s Control the policy of fsync. Currently supports "posix",
248 "strict", and "nobarrier". In "posix" mode, which is
249 default, fsync will follow POSIX semantics and does a
250 light operation to improve the filesystem performance.
251 In "strict" mode, fsync will be heavy and behaves in line
252 with xfs, ext4 and btrfs, where xfstest generic/342 will
253 pass, but the performance will regress. "nobarrier" is
254 based on "posix", but doesn't issue flush command for
255 non-atomic files likewise "nobarrier" mount option.
256 test_dummy_encryption
257 test_dummy_encryption=%s
258 Enable dummy encryption, which provides a fake fscrypt
259 context. The fake fscrypt context is used by xfstests.
260 The argument may be either "v1" or "v2", in order to
261 select the corresponding fscrypt policy version.
262 checkpoint=%s[:%u[%]] Set to "disable" to turn off checkpointing. Set to "enable"
263 to reenable checkpointing. Is enabled by default. While
264 disabled, any unmounting or unexpected shutdowns will cause
265 the filesystem contents to appear as they did when the
266 filesystem was mounted with that option.
267 While mounting with checkpoint=disabled, the filesystem must
268 run garbage collection to ensure that all available space can
269 be used. If this takes too much time, the mount may return
270 EAGAIN. You may optionally add a value to indicate how much
271 of the disk you would be willing to temporarily give up to
272 avoid additional garbage collection. This can be given as a
273 number of blocks, or as a percent. For instance, mounting
274 with checkpoint=disable:100% would always succeed, but it may
275 hide up to all remaining free space. The actual space that
276 would be unusable can be viewed at /sys/fs/f2fs/<disk>/unusable
277 This space is reclaimed once checkpoint=enable.
278 checkpoint_merge When checkpoint is enabled, this can be used to create a kernel
279 daemon and make it to merge concurrent checkpoint requests as
280 much as possible to eliminate redundant checkpoint issues. Plus,
281 we can eliminate the sluggish issue caused by slow checkpoint
282 operation when the checkpoint is done in a process context in
283 a cgroup having low i/o budget and cpu shares. To make this
284 do better, we set the default i/o priority of the kernel daemon
285 to "3", to give one higher priority than other kernel threads.
286 This is the same way to give a I/O priority to the jbd2
287 journaling thread of ext4 filesystem.
288 nocheckpoint_merge Disable checkpoint merge feature.
289 compress_algorithm=%s Control compress algorithm, currently f2fs supports "lzo",
290 "lz4", "zstd" and "lzo-rle" algorithm.
291 compress_algorithm=%s:%d Control compress algorithm and its compress level, now, only
292 "lz4" and "zstd" support compress level config.
293 algorithm level range
294 lz4 3 - 16
295 zstd 1 - 22
296 compress_log_size=%u Support configuring compress cluster size. The size will
297 be 4KB * (1 << %u). The default and minimum sizes are 16KB.
298 compress_extension=%s Support adding specified extension, so that f2fs can enable
299 compression on those corresponding files, e.g. if all files
300 with '.ext' has high compression rate, we can set the '.ext'
301 on compression extension list and enable compression on
302 these file by default rather than to enable it via ioctl.
303 For other files, we can still enable compression via ioctl.
304 Note that, there is one reserved special extension '*', it
305 can be set to enable compression for all files.
306 nocompress_extension=%s Support adding specified extension, so that f2fs can disable
307 compression on those corresponding files, just contrary to compression extension.
308 If you know exactly which files cannot be compressed, you can use this.
309 The same extension name can't appear in both compress and nocompress
310 extension at the same time.
311 If the compress extension specifies all files, the types specified by the
312 nocompress extension will be treated as special cases and will not be compressed.
313 Don't allow use '*' to specifie all file in nocompress extension.
314 After add nocompress_extension, the priority should be:
315 dir_flag < comp_extention,nocompress_extension < comp_file_flag,no_comp_file_flag.
316 See more in compression sections.
317
318 compress_chksum Support verifying chksum of raw data in compressed cluster.
319 compress_mode=%s Control file compression mode. This supports "fs" and "user"
320 modes. In "fs" mode (default), f2fs does automatic compression
321 on the compression enabled files. In "user" mode, f2fs disables
322 the automaic compression and gives the user discretion of
323 choosing the target file and the timing. The user can do manual
324 compression/decompression on the compression enabled files using
325 ioctls.
326 compress_cache Support to use address space of a filesystem managed inode to
327 cache compressed block, in order to improve cache hit ratio of
328 random read.
329 inlinecrypt When possible, encrypt/decrypt the contents of encrypted
330 files using the blk-crypto framework rather than
331 filesystem-layer encryption. This allows the use of
332 inline encryption hardware. The on-disk format is
333 unaffected. For more details, see
334 Documentation/block/inline-encryption.rst.
335 atgc Enable age-threshold garbage collection, it provides high
336 effectiveness and efficiency on background GC.
337 discard_unit=%s Control discard unit, the argument can be "block", "segment"
338 and "section", issued discard command's offset/size will be
339 aligned to the unit, by default, "discard_unit=block" is set,
340 so that small discard functionality is enabled.
341 For blkzoned device, "discard_unit=section" will be set by
342 default, it is helpful for large sized SMR or ZNS devices to
343 reduce memory cost by getting rid of fs metadata supports small
344 discard.
345 memory=%s Control memory mode. This supports "normal" and "low" modes.
346 "low" mode is introduced to support low memory devices.
347 Because of the nature of low memory devices, in this mode, f2fs
348 will try to save memory sometimes by sacrificing performance.
349 "normal" mode is the default mode and same as before.
350 age_extent_cache Enable an age extent cache based on rb-tree. It records
351 data block update frequency of the extent per inode, in
352 order to provide better temperature hints for data block
353 allocation.
> 354 hot_data_age_threshold=%u When age_extent_cache is on, it controls the age
355 threshold to indicate the data blocks as hot. By default it was
356 initialized as 262144 blocks(equals to 1GB).
357 warm_data_age_threshold=%u When age_extent_cache is on, it controls the age
358 threshold to indicate the data blocks as warm. By default it was
359 initialized as 2621440 blocks(equals to 10GB).
360 ======================== ============================================================
361
--
0-DAY CI Kernel Test Service
https://01.org/lkp
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 38869 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 6.1.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc-11 (Debian 11.3.0-8) 11.3.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=110300
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23900
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23900
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
# CONFIG_WATCH_QUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_USELIB is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=100
# end of Timers subsystem
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# end of BPF subsystem
CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_DYNAMIC is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
# end of RCU Subsystem
# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_CGROUPS is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_TIME_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BOOT_CONFIG is not set
# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_EXPERT is not set
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_RSEQ=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# end of Kernel Performance Events And Counters
# CONFIG_PROFILING is not set
# end of General setup
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_NR_GPIO=1024
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
# CONFIG_SMP is not set
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
# CONFIG_X86_CPU_RESCTRL is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
# CONFIG_HYPERVISOR_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_NR_CPUS_RANGE_BEGIN=1
CONFIG_NR_CPUS_RANGE_END=1
CONFIG_NR_CPUS_DEFAULT=1
CONFIG_NR_CPUS=1
CONFIG_UP_LATE_INIT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
# CONFIG_X86_MCE is not set
#
# Performance monitoring
#
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_PERF_EVENTS_AMD_UNCORE is not set
# CONFIG_PERF_EVENTS_AMD_BRS is not set
# end of Performance monitoring
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_X86_IOPL_IOPERM is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_X86_UMIP=y
CONFIG_CC_HAS_IBT=y
# CONFIG_X86_KERNEL_IBT is not set
# CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS is not set
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_LEGACY_VSYSCALL_XONLY=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
# CONFIG_STRICT_SIGALTSTACK_SIZE is not set
CONFIG_HAVE_LIVEPATCH=y
# end of Processor type and features
CONFIG_CC_HAS_SLS=y
CONFIG_CC_HAS_RETURN_THUNK=y
# CONFIG_SPECULATION_MITIGATIONS is not set
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_PM is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
# CONFIG_ACPI is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# end of CPU Frequency scaling
#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# end of CPU Idle
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
CONFIG_ISA_DMA_API=y
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
# CONFIG_IA32_EMULATION is not set
# CONFIG_X86_X32_ABI is not set
# end of Binary Emulations
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y
#
# General architecture-dependent options
#
CONFIG_GENERIC_ENTRY=y
# CONFIG_JUMP_LABEL is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_RUST=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
# CONFIG_SECCOMP is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR is not set
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_ARCH_SUPPORTS_CFI_CLANG=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_CONTEXT_TRACKING_USER_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_OBJTOOL=y
CONFIG_HAVE_JUMP_LABEL_HACK=y
CONFIG_HAVE_NOINSTR_HACK=y
CONFIG_HAVE_NOINSTR_VALIDATION=y
CONFIG_HAVE_UACCESS_VALIDATION=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
# CONFIG_COMPAT_32BIT_TIME is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
# CONFIG_VMAP_STACK is not set
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y
#
# GCOV-based kernel profiling
#
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_BLOCK_LEGACY_AUTOLOAD is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types
#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
#
# Executable file formats
#
# CONFIG_BINFMT_ELF is not set
# CONFIG_BINFMT_SCRIPT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
# CONFIG_SWAP is not set
#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLAB_MERGE_DEFAULT is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SLUB_STATS is not set
# end of SLAB allocator options
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_FAST_GUP=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
# CONFIG_COMPACTION is not set
# CONFIG_PAGE_REPORTING is not set
CONFIG_PHYS_ADDR_T_64BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANTS_THP_SWAP=y
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_CMA is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
#
# GUP_TEST needs to have DEBUG_FS enabled
#
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_SECRETMEM=y
# CONFIG_ANON_VMA_NAME is not set
# CONFIG_USERFAULTFD is not set
# CONFIG_LRU_GEN is not set
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
# CONFIG_NET is not set
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
# CONFIG_PCI is not set
# CONFIG_PCCARD is not set
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
# CONFIG_HISILICON_LPC is not set
# CONFIG_INTEL_IXP4XX_EB is not set
# CONFIG_QCOM_EBI2 is not set
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
# end of ARM System Control and Management Interface Protocol
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_SYSFB_SIMPLEFB is not set
# CONFIG_BCM47XX_NVRAM is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
#
# NVME Support
#
# CONFIG_NVME_FC is not set
# end of NVME Support
#
# Misc devices
#
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_QCOM_COINCELL is not set
# CONFIG_SRAM is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
# end of EEPROM support
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
#
# Altera FPGA firmware download module (requires I2C)
#
# CONFIG_ECHO is not set
# CONFIG_PVPANIC is not set
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# end of SCSI device support
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# end of IEEE 1394 (FireWire) support
# CONFIG_MACINTOSH_DRIVERS is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LDISC_AUTOLOAD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_MESON is not set
# CONFIG_SERIAL_CLPS711X is not set
# CONFIG_SERIAL_SAMSUNG is not set
# CONFIG_SERIAL_TEGRA is not set
# CONFIG_SERIAL_IMX is not set
# CONFIG_SERIAL_UARTLITE is not set
# CONFIG_SERIAL_SH_SCI is not set
# CONFIG_SERIAL_MSM is not set
# CONFIG_SERIAL_VT8500 is not set
# CONFIG_SERIAL_OMAP is not set
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_MXS_AUART is not set
# CONFIG_SERIAL_MPS2_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_SERIAL_STM32 is not set
# CONFIG_SERIAL_OWL is not set
# CONFIG_SERIAL_RDA is not set
# CONFIG_SERIAL_LITEUART is not set
# CONFIG_SERIAL_SUNPLUS is not set
# end of Serial drivers
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NULL_TTY is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_ASPEED_KCS_IPMI_BMC is not set
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_MWAVE is not set
# CONFIG_DEVMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices
#
# I2C support
#
# CONFIG_I2C is not set
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SUN4I_GPADC is not set
# CONFIG_MFD_AT91_USART is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
# CONFIG_MFD_MXS_LRADC is not set
# CONFIG_MFD_MX25_TSADC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_PM8XXX is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SUN6I_PRCM is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_STM32_LPTIMER is not set
# CONFIG_MFD_STM32_TIMERS is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_IMX_IPUV3_CORE is not set
# CONFIG_DRM is not set
#
# ARM devices
#
# end of ARM devices
#
# Frame buffer Devices
#
# CONFIG_FB is not set
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
# end of Backlight & LCD device support
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# end of Console display driver support
# end of Graphics support
# CONFIG_SOUND is not set
#
# HID support
#
# CONFIG_HID is not set
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VHOST_MENU is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_OLPC_XO175 is not set
# CONFIG_SURFACE_PLATFORMS is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
# CONFIG_COMMON_CLK is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_BCM2835_TIMER is not set
# CONFIG_BCM_KONA_TIMER is not set
# CONFIG_DAVINCI_TIMER is not set
# CONFIG_DIGICOLOR_TIMER is not set
# CONFIG_OMAP_DM_TIMER is not set
# CONFIG_DW_APB_TIMER is not set
# CONFIG_FTTMR010_TIMER is not set
# CONFIG_IXP4XX_TIMER is not set
# CONFIG_MESON6_TIMER is not set
# CONFIG_OWL_TIMER is not set
# CONFIG_RDA_TIMER is not set
# CONFIG_SUN4I_TIMER is not set
# CONFIG_TEGRA_TIMER is not set
# CONFIG_VT8500_TIMER is not set
# CONFIG_NPCM7XX_TIMER is not set
# CONFIG_ASM9260_TIMER is not set
# CONFIG_CLKSRC_DBX500_PRCMU is not set
# CONFIG_CLPS711X_TIMER is not set
# CONFIG_MXS_TIMER is not set
# CONFIG_NSPIRE_TIMER is not set
# CONFIG_INTEGRATOR_AP_TIMER is not set
# CONFIG_CLKSRC_PISTACHIO is not set
# CONFIG_CLKSRC_STM32_LP is not set
# CONFIG_ARMV7M_SYSTICK is not set
# CONFIG_ATMEL_PIT is not set
# CONFIG_ATMEL_ST is not set
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
# CONFIG_FSL_FTM_TIMER is not set
# CONFIG_OXNAS_RPS_TIMER is not set
# CONFIG_MTK_TIMER is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_RENESAS_OSTM is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_CLKSRC_PXA is not set
# CONFIG_TIMER_IMX_SYS_CTR is not set
# CONFIG_CLKSRC_ST_LPC is not set
# CONFIG_GXP_TIMER is not set
# CONFIG_MSC313E_TIMER is not set
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers
# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# CONFIG_MESON_CANVAS is not set
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers
#
# Apple SoC drivers
#
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers
#
# ASPEED SoC drivers
#
# CONFIG_ASPEED_LPC_CTRL is not set
# CONFIG_ASPEED_LPC_SNOOP is not set
# CONFIG_ASPEED_UART_ROUTING is not set
# CONFIG_ASPEED_P2A_CTRL is not set
# CONFIG_ASPEED_SOCINFO is not set
# end of ASPEED SoC drivers
# CONFIG_AT91_SOC_ID is not set
# CONFIG_AT91_SOC_SFR is not set
#
# Broadcom SoC drivers
#
# CONFIG_SOC_BCM63XX is not set
# CONFIG_SOC_BRCMSTB is not set
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# CONFIG_SOC_IMX8M is not set
# CONFIG_SOC_IMX9 is not set
# end of i.MX SoC drivers
#
# IXP4xx SoC drivers
#
# CONFIG_IXP4XX_QMGR is not set
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers
#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
# CONFIG_MTK_DEVAPC is not set
# CONFIG_MTK_INFRACFG is not set
# CONFIG_MTK_MMSYS is not set
# end of MediaTek SoC drivers
#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_RPMH is not set
# CONFIG_QCOM_SPM is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers
# CONFIG_SOC_RENESAS is not set
# CONFIG_ROCKCHIP_GRF is not set
# CONFIG_SOC_SAMSUNG is not set
# CONFIG_SOC_TI is not set
# CONFIG_UX500_SOC_ID is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
# CONFIG_AL_FIC is not set
# CONFIG_RENESAS_INTC_IRQPIN is not set
# CONFIG_RENESAS_IRQC is not set
# CONFIG_RENESAS_RZA1_IRQC is not set
# CONFIG_RENESAS_RZG2L_IRQC is not set
# CONFIG_SL28CPLD_INTC is not set
# CONFIG_TS4800_IRQ is not set
# CONFIG_INGENIC_TCU_IRQ is not set
# CONFIG_IRQ_UNIPHIER_AIDET is not set
# CONFIG_MESON_IRQ_GPIO is not set
# CONFIG_IMX_IRQSTEER is not set
# CONFIG_IMX_INTMUX is not set
# CONFIG_EXYNOS_IRQ_COMBINER is not set
# CONFIG_MST_IRQ is not set
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_PISTACHIO_USB is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_PHY_BCM63XX_USBH is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms
# CONFIG_PHY_HI6220_USB is not set
# CONFIG_PHY_HI3660_USB is not set
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
# CONFIG_PHY_HISTB_COMBPHY is not set
# CONFIG_PHY_HISI_INNO_USB2 is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_PXA_USB is not set
# CONFIG_PHY_MMP3_USB is not set
# CONFIG_PHY_MMP3_HSIC is not set
# CONFIG_PHY_MT7621_PCI is not set
# CONFIG_PHY_RALINK_USB is not set
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
# CONFIG_PHY_TEGRA194_P2U is not set
# CONFIG_PHY_DA8XX_USB is not set
# CONFIG_OMAP_CONTROL_PHY is not set
# CONFIG_TI_PIPE3 is not set
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
# CONFIG_PHY_INTEL_KEEMBAY_USB is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# CONFIG_ARM_CCN is not set
# CONFIG_ARM_CMN is not set
# CONFIG_FSL_IMX8_DDR_PMU is not set
# CONFIG_XGENE_PMU is not set
# CONFIG_ARM_DMC620_PMU is not set
# CONFIG_MARVELL_CN10K_TAD_PMU is not set
# CONFIG_ALIBABA_UNCORE_DRW_PMU is not set
# CONFIG_MARVELL_CN10K_DDR_PMU is not set
# end of Performance monitor support
# CONFIG_RAS is not set
#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android
# CONFIG_DAX is not set
# CONFIG_NVMEM is not set
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
CONFIG_ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# end of Pseudo filesystems
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NLS is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# end of Crypto library routines
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC64_ROCKSOFT is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
# CONFIG_RANDOM32_SELFTEST is not set
# CONFIG_XZ_DEC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_IRQ_POLL is not set
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
# CONFIG_PARMAN is not set
# CONFIG_OBJAGG is not set
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
# CONFIG_SYMBOLIC_ERRNAME is not set
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
# CONFIG_DEBUG_KERNEL is not set
#
# Compile-time checks and compiler options
#
CONFIG_AS_HAS_NON_CONST_LEB128=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_OBJTOOL=y
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# end of Networking Debugging
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_PAGE_TABLE_CHECK is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
CONFIG_HAVE_ARCH_KMSAN=y
# end of Memory Debugging
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_WW_MUTEX_SELFTEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
#
# Debug kernel data structures
#
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures
#
# RCU Debugging
#
# end of RCU Debugging
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_RETHOOK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_NO_PATCHABLE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
#
# x86 Debugging
#
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
CONFIG_WARN_MISSING_DOCUMENTS=y
CONFIG_WARN_ABI_ERRORS=y
# end of Kernel hacking
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2022-12-07 9:58 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20221206063616.68522-1-frank.li@vivo.com>
2022-12-07 9:57 ` [PATCH] f2fs: introduce hot_data_age_threshold and warm_data_age_threshold mount opt kernel test robot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).