* [PATCH v4 1/1] ARM: dts: aspeed: Add Inspur NF5280M6 BMC machine
@ 2021-05-26 9:22 guopingjn
2021-07-13 11:47 ` Ping Guo
0 siblings, 1 reply; 3+ messages in thread
From: guopingjn @ 2021-05-26 9:22 UTC (permalink / raw)
To: joel, andrew, openbmc; +Cc: guoping, liuxiwei, banht, wangxinglong
From: Ping Guo <guoping@inspur.com>
The Inspur NF5280M6 is an x86 platform server with an AST2500-based BMC.
This dts file provides a basic configuration for its OpenBMC
development.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Signed-off-by: Ping Guo <guoping@inspur.com>
---
changelog:
v4:
-Remove invalid gpios_property
-Remove unused GFX device node
-Update KCS binding to the newer style
v3:
-Remove unnecessary lpc_ctrl node
-Remove unnecessary gfx_memory,flash_memory
v2:
-Remove unavailable uart-clock-high-speed property
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/aspeed-bmc-inspur-nf5280m6.dts | 691 ++++++++++++++++++
2 files changed, 692 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 03b5424bafa8..cc2580f1e99b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1405,6 +1405,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-ibm-rainier-4u.dtb \
aspeed-bmc-intel-s2600wf.dtb \
aspeed-bmc-inspur-fp5280g2.dtb \
+ aspeed-bmc-inspur-nf5280m6.dtb \
aspeed-bmc-lenovo-hr630.dtb \
aspeed-bmc-lenovo-hr855xg2.dtb \
aspeed-bmc-microsoft-olympus.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
new file mode 100644
index 000000000000..43eb3f476914
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "NF5280M6 BMC";
+ compatible = "inspur,nf5280m6-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@9f000000 {
+ no-map;
+ reg = <0x9f000000 0x01000000>; /* 16M */
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>; /* 32M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ bmc_alive {
+ label = "bmc_alive";
+ gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ led-pattern = <1000 1000>;
+ };
+
+ front-fan {
+ label = "front-fan";
+ gpios = <&gpio ASPEED_GPIO(F,2) GPIO_ACTIVE_LOW>;
+ };
+
+ front-psu {
+ label = "front-psu";
+ gpios = <&gpio ASPEED_GPIO(F,3) GPIO_ACTIVE_LOW>;
+ };
+
+ front-syshot {
+ label = "front-syshot";
+ gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
+ };
+
+ front-memory {
+ label = "front-memory";
+ gpios = <&gpio ASPEED_GPIO(S, 7) GPIO_ACTIVE_LOW>;
+ };
+
+ identify {
+ label = "identify";
+ gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bios";
+ spi-max-frequency = <100000000>;
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+ <&syscon ASPEED_CLK_MAC1RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&gpio {
+ status = "okay";
+ /* Enable GPIOE0 and GPIOE2 pass-through by default */
+ pinctrl-names = "pass-through";
+ pinctrl-0 = <&pinctrl_gpie0_default
+ &pinctrl_gpie2_default>;
+ gpio-line-names =
+ /*A0-A7*/ "","MAC2LINK","BMC_RESET_CPLD","","BMC_SCL9","","MAC2MDC_R","",
+ /*B0-B7*/ "BMC_INIT_OK","FM_SKU_ID2","FM_SPD_DDRCPU_LVLSHFT_DIS_R_N",
+ "FM_CPU_MSMI_CATERR_LVT3_BMC_N","","FM_CPU0_PROCHOT_LVT3_N",
+ "FM_CPU_MEM_THERMTRIP_LVT3_N","BIOS_LOAD_DEFAULT_R_N",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","BMC_SD2CMD","BMC_SD2DAT0","BMC_SD2DAT1","BMC_SD2DAT2",
+ "BMC_SD2DAT3","BMC_SD2DET","BMC_SD2WPT",
+ /*E0-E7*/ "FM_BOARD_ID0","FM_BOARD_ID1","FM_BOARD_ID2","FM_BOARD_ID3",
+ "FM_BOARD_ID4","FM_BOARD_ID5","","",
+ /*F0-F7*/ "PSU1_PRESENT_N","PSU2_PRESENT_N","FAN_FAULT_LED_N","PSU_FAULT_LED_N",
+ "BIOS_DEBUG_MODE_N","FP_LCD_RESET","FAN_TYPE_SEL",
+ "RST_GLB_RST_WARN_N",
+ /*G0-G7*/ "IRQ_LPTM21L_ALERT_N","IRQ_PLD_ALERT_N","AC_FAIL_N","FP_LCD_PRESENT_BMC",
+ "BMC_JTAG_TCK_MUX_SEL","BMC_BIOS_RESERVED","SYS_NMI_N","BMC_NMI_N",
+ /*H0-H7*/ "JTAG_BMC_TDI","JTAG_BMC_TDO","JTAG_BMC_TCK","JTAG_BMC_TMS","FM_BOARD_ID6",
+ "FM_SKU_ID0","IRQ_SML1_PMBUS_ALERT_N","IRQ_SML0_ALERT_MUX_N",
+ /*I0-I7*/ "FM_CPU_ERR0_LVT3_BMC_N","FM_CPU_ERR1_LVT3_BMC_N","FM_BMC_PCH_SCI_LPC_N",
+ "FM_SYS_THROTTLE_LVC3","SPI2_PCH_CS0_N","","","",
+ /*J0-J7*/ "FM_CPU0_SKTOCC_LVT3_N","FM_CPU1_SKTOCC_LVT3_N","","SYSHOT_FAULT_LED_N",
+ "VGA_HSYNC","VGA_VSYNC","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","SYS_UART_TXD1","SYS_UART_RXD1",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","","","","",
+ /*Q0-Q7*/ "","","","","","","FM_PCH_BMC_THERMTRIP_N","INTRUDER_N",
+ /*R0-R7*/ "SPI_BMC_BOOT_CS1_R_N","FM_CPU_MEMHOT_LVC3_N",
+ "DBP_CPU_PREQ_N","FM_CPU_ERR2_LVT3_BMC_N",
+ "RISER_NCSI_EN_N","","LOM_NCSI_EN_N","OCP_NCSI_EN_N",
+ /*S0-S7*/ "BMC_XDP_PRDY_N","SIO_POWER_GOOD","BMC_PWR_DEBUG_R_N","BMC_DEBUG_EN_R_N","",
+ "GPIOS5_BMC","","GPIOS7_BMC",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","BMC_DET_UID_N","BMC_JTAG_SEL","SIO_ONCONTROL","","","","",
+ /*Z0-Z7*/ "XDP_PRESENT_N","DBP_SYSPWROK","BMC_JTAG_SEL","FM_SMI_ACTIVE_N","",
+ "GPIOZ5","","",
+ /*AA0-AA7*/ "FP_BMC_SYSLED_N","PS_PWROK","RST_PLTRST_BMC_N","HDA_SDO_BMC",
+ "FM_SLPS4_R_N","","POWER_BUTTON","POWER_OUT",
+ /*AB0-AB7*/ "RESET_OUT","RESET_BUTTON","BIOS_REFLASH","POST_COMPLETE","","","","",
+ /*AC0-AC7*/ "","","","","","","","";
+};
+
+&i2c0 {
+ /* FP_LCD */
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ label = "fru";
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ tmp112@48 {
+ compatible = "ti,tmp112";
+ reg = <0x48>;
+ label = "inlet";
+ };
+
+ tmp112@49 {
+ compatible = "ti,tmp112";
+ reg = <0x49>;
+ label = "outlet";
+ };
+
+ pca9548@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ pca9548@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ };
+
+ pca9548@71 {
+ compatible = "nxp,pca9548";
+ reg = <0x71>;
+ };
+
+ pca9548@72 {
+ compatible = "nxp,pca9548";
+ reg = <0x72>;
+ };
+};
+
+&i2c4 {
+ /* IPMB */
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+
+ pca9548@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ pca9548@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ adm1278@33 {
+ compatible = "adi,adm1293";
+ reg = <0x33>;
+ };
+
+ adm1278@32 {
+ compatible = "adi,adm1293";
+ reg = <0x32>;
+ };
+
+ adm1278@20 {
+ compatible = "adi,adm1293";
+ reg = <0x20>;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ pca0: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca1: pca9555@22 {
+ compatible = "nxp,pca9555";
+ reg = <0x22>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca2: pca9555@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca3: pca9555@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+};
+
+&i2c9 {
+ /* cpld */
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+
+ pca4: pca9555@24 {
+ compatible = "nxp,pca9555";
+ reg = <0x24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca5: pca9555@25 {
+ compatible = "nxp,pca9555";
+ reg = <0x25>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ power-supply@58 {
+ compatible = "inspur,ipsps1";
+ reg = <0x58>;
+ };
+
+ power-supply@59 {
+ compatible = "inspur,ipsps1";
+ reg = <0x59>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default
+ &pinctrl_pwm4_default &pinctrl_pwm5_default
+ &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+ };
+
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+ };
+
+ fan@5 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+ };
+
+ fan@6 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+ };
+
+ fan@7 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+ };
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+};
+
+&kcs4 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca4>;
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
+ &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
+ &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
+ &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
+ &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+ status = "okay";
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+&vuart {
+ status = "okay";
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v4 1/1] ARM: dts: aspeed: Add Inspur NF5280M6 BMC machine
2021-05-26 9:22 [PATCH v4 1/1] ARM: dts: aspeed: Add Inspur NF5280M6 BMC machine guopingjn
@ 2021-07-13 11:47 ` Ping Guo
2021-07-16 6:40 ` Joel Stanley
0 siblings, 1 reply; 3+ messages in thread
From: Ping Guo @ 2021-07-13 11:47 UTC (permalink / raw)
To: joel, andrew, openbmc; +Cc: guoping, liuxiwei, banht, wangxinglong
Hi Joel,
Thanks for your reviews before.
I want to konw wherther this patch could be merged or there are still
problems to fix before that.
Please help review this patch again.Thank you!
On 5/26/21 5:22 PM, guopingjn@gmail.com wrote:
> From: Ping Guo <guoping@inspur.com>
>
> The Inspur NF5280M6 is an x86 platform server with an AST2500-based BMC.
> This dts file provides a basic configuration for its OpenBMC
> development.
>
> Signed-off-by: George Liu <liuxiwei@inspur.com>
> Signed-off-by: Ping Guo <guoping@inspur.com>
> ---
> changelog:
> v4:
> -Remove invalid gpios_property
> -Remove unused GFX device node
> -Update KCS binding to the newer style
> v3:
> -Remove unnecessary lpc_ctrl node
> -Remove unnecessary gfx_memory,flash_memory
> v2:
> -Remove unavailable uart-clock-high-speed property
>
> arch/arm/boot/dts/Makefile | 1 +
> .../boot/dts/aspeed-bmc-inspur-nf5280m6.dts | 691 ++++++++++++++++++
> 2 files changed, 692 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 03b5424bafa8..cc2580f1e99b 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1405,6 +1405,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-ibm-rainier-4u.dtb \
> aspeed-bmc-intel-s2600wf.dtb \
> aspeed-bmc-inspur-fp5280g2.dtb \
> + aspeed-bmc-inspur-nf5280m6.dtb \
> aspeed-bmc-lenovo-hr630.dtb \
> aspeed-bmc-lenovo-hr855xg2.dtb \
> aspeed-bmc-microsoft-olympus.dtb \
> diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
> new file mode 100644
> index 000000000000..43eb3f476914
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
> @@ -0,0 +1,691 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2021 Inspur Corporation
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/i2c/i2c.h>
> +#include <dt-bindings/leds/leds-pca955x.h>
> +
> +/ {
> + model = "NF5280M6 BMC";
> + compatible = "inspur,nf5280m6-bmc", "aspeed,ast2500";
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=ttyS4,115200 earlyprintk";
> + };
> +
> + memory@80000000 {
> + reg = <0x80000000 0x40000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + vga_memory: framebuffer@9f000000 {
> + no-map;
> + reg = <0x9f000000 0x01000000>; /* 16M */
> + };
> +
> + video_engine_memory: jpegbuffer {
> + size = <0x02000000>; /* 32M */
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + bmc_alive {
> + label = "bmc_alive";
> + gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "timer";
> + led-pattern = <1000 1000>;
> + };
> +
> + front-fan {
> + label = "front-fan";
> + gpios = <&gpio ASPEED_GPIO(F,2) GPIO_ACTIVE_LOW>;
> + };
> +
> + front-psu {
> + label = "front-psu";
> + gpios = <&gpio ASPEED_GPIO(F,3) GPIO_ACTIVE_LOW>;
> + };
> +
> + front-syshot {
> + label = "front-syshot";
> + gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
> + };
> +
> + front-memory {
> + label = "front-memory";
> + gpios = <&gpio ASPEED_GPIO(S, 7) GPIO_ACTIVE_LOW>;
> + };
> +
> + identify {
> + label = "identify";
> + gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
> + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
> + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
> + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
> + };
> +};
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "bmc";
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout.dtsi"
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1_default>;
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "bios";
> + spi-max-frequency = <100000000>;
> + };
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&mac0 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rmii1_default>;
> + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
> + <&syscon ASPEED_CLK_MAC1RCLK>;
> + clock-names = "MACCLK", "RCLK";
> + use-ncsi;
> +};
> +
> +&mac1 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> +};
> +
> +&gpio {
> + status = "okay";
> + /* Enable GPIOE0 and GPIOE2 pass-through by default */
> + pinctrl-names = "pass-through";
> + pinctrl-0 = <&pinctrl_gpie0_default
> + &pinctrl_gpie2_default>;
> + gpio-line-names =
> + /*A0-A7*/ "","MAC2LINK","BMC_RESET_CPLD","","BMC_SCL9","","MAC2MDC_R","",
> + /*B0-B7*/ "BMC_INIT_OK","FM_SKU_ID2","FM_SPD_DDRCPU_LVLSHFT_DIS_R_N",
> + "FM_CPU_MSMI_CATERR_LVT3_BMC_N","","FM_CPU0_PROCHOT_LVT3_N",
> + "FM_CPU_MEM_THERMTRIP_LVT3_N","BIOS_LOAD_DEFAULT_R_N",
> + /*C0-C7*/ "","","","","","","","",
> + /*D0-D7*/ "","BMC_SD2CMD","BMC_SD2DAT0","BMC_SD2DAT1","BMC_SD2DAT2",
> + "BMC_SD2DAT3","BMC_SD2DET","BMC_SD2WPT",
> + /*E0-E7*/ "FM_BOARD_ID0","FM_BOARD_ID1","FM_BOARD_ID2","FM_BOARD_ID3",
> + "FM_BOARD_ID4","FM_BOARD_ID5","","",
> + /*F0-F7*/ "PSU1_PRESENT_N","PSU2_PRESENT_N","FAN_FAULT_LED_N","PSU_FAULT_LED_N",
> + "BIOS_DEBUG_MODE_N","FP_LCD_RESET","FAN_TYPE_SEL",
> + "RST_GLB_RST_WARN_N",
> + /*G0-G7*/ "IRQ_LPTM21L_ALERT_N","IRQ_PLD_ALERT_N","AC_FAIL_N","FP_LCD_PRESENT_BMC",
> + "BMC_JTAG_TCK_MUX_SEL","BMC_BIOS_RESERVED","SYS_NMI_N","BMC_NMI_N",
> + /*H0-H7*/ "JTAG_BMC_TDI","JTAG_BMC_TDO","JTAG_BMC_TCK","JTAG_BMC_TMS","FM_BOARD_ID6",
> + "FM_SKU_ID0","IRQ_SML1_PMBUS_ALERT_N","IRQ_SML0_ALERT_MUX_N",
> + /*I0-I7*/ "FM_CPU_ERR0_LVT3_BMC_N","FM_CPU_ERR1_LVT3_BMC_N","FM_BMC_PCH_SCI_LPC_N",
> + "FM_SYS_THROTTLE_LVC3","SPI2_PCH_CS0_N","","","",
> + /*J0-J7*/ "FM_CPU0_SKTOCC_LVT3_N","FM_CPU1_SKTOCC_LVT3_N","","SYSHOT_FAULT_LED_N",
> + "VGA_HSYNC","VGA_VSYNC","","",
> + /*K0-K7*/ "","","","","","","","",
> + /*L0-L7*/ "","","","","","","SYS_UART_TXD1","SYS_UART_RXD1",
> + /*M0-M7*/ "","","","","","","","",
> + /*N0-N7*/ "","","","","","","","",
> + /*O0-O7*/ "","","","","","","","",
> + /*P0-P7*/ "","","","","","","","",
> + /*Q0-Q7*/ "","","","","","","FM_PCH_BMC_THERMTRIP_N","INTRUDER_N",
> + /*R0-R7*/ "SPI_BMC_BOOT_CS1_R_N","FM_CPU_MEMHOT_LVC3_N",
> + "DBP_CPU_PREQ_N","FM_CPU_ERR2_LVT3_BMC_N",
> + "RISER_NCSI_EN_N","","LOM_NCSI_EN_N","OCP_NCSI_EN_N",
> + /*S0-S7*/ "BMC_XDP_PRDY_N","SIO_POWER_GOOD","BMC_PWR_DEBUG_R_N","BMC_DEBUG_EN_R_N","",
> + "GPIOS5_BMC","","GPIOS7_BMC",
> + /*T0-T7*/ "","","","","","","","",
> + /*U0-U7*/ "","","","","","","","",
> + /*V0-V7*/ "","","","","","","","",
> + /*W0-W7*/ "","","","","","","","",
> + /*X0-X7*/ "","","","","","","","",
> + /*Y0-Y7*/ "","BMC_DET_UID_N","BMC_JTAG_SEL","SIO_ONCONTROL","","","","",
> + /*Z0-Z7*/ "XDP_PRESENT_N","DBP_SYSPWROK","BMC_JTAG_SEL","FM_SMI_ACTIVE_N","",
> + "GPIOZ5","","",
> + /*AA0-AA7*/ "FP_BMC_SYSLED_N","PS_PWROK","RST_PLTRST_BMC_N","HDA_SDO_BMC",
> + "FM_SLPS4_R_N","","POWER_BUTTON","POWER_OUT",
> + /*AB0-AB7*/ "RESET_OUT","RESET_BUTTON","BIOS_REFLASH","POST_COMPLETE","","","","",
> + /*AC0-AC7*/ "","","","","","","","";
> +};
> +
> +&i2c0 {
> + /* FP_LCD */
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + eeprom@50 {
> + compatible = "atmel,24c256";
> + reg = <0x50>;
> + label = "fru";
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + tmp112@48 {
> + compatible = "ti,tmp112";
> + reg = <0x48>;
> + label = "inlet";
> + };
> +
> + tmp112@49 {
> + compatible = "ti,tmp112";
> + reg = <0x49>;
> + label = "outlet";
> + };
> +
> + pca9548@70 {
> + compatible = "nxp,pca9548";
> + reg = <0x70>;
> + };
> +};
> +
> +&i2c3 {
> + status = "okay";
> +
> + pca9548@70 {
> + compatible = "nxp,pca9548";
> + reg = <0x70>;
> + };
> +
> + pca9548@71 {
> + compatible = "nxp,pca9548";
> + reg = <0x71>;
> + };
> +
> + pca9548@72 {
> + compatible = "nxp,pca9548";
> + reg = <0x72>;
> + };
> +};
> +
> +&i2c4 {
> + /* IPMB */
> + status = "okay";
> +};
> +
> +&i2c5 {
> + status = "okay";
> +
> + pca9548@70 {
> + compatible = "nxp,pca9548";
> + reg = <0x70>;
> + };
> +};
> +
> +&i2c6 {
> + status = "okay";
> +
> + pca9548@70 {
> + compatible = "nxp,pca9548";
> + reg = <0x70>;
> + };
> +};
> +
> +&i2c7 {
> + status = "okay";
> +
> + adm1278@33 {
> + compatible = "adi,adm1293";
> + reg = <0x33>;
> + };
> +
> + adm1278@32 {
> + compatible = "adi,adm1293";
> + reg = <0x32>;
> + };
> +
> + adm1278@20 {
> + compatible = "adi,adm1293";
> + reg = <0x20>;
> + };
> +};
> +
> +&i2c8 {
> + status = "okay";
> +
> + pca0: pca9555@23 {
> + compatible = "nxp,pca9555";
> + reg = <0x23>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio@0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> + pca1: pca9555@22 {
> + compatible = "nxp,pca9555";
> + reg = <0x22>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio@0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> + pca2: pca9555@20 {
> + compatible = "nxp,pca9555";
> + reg = <0x20>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio@0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> + pca3: pca9555@21 {
> + compatible = "nxp,pca9555";
> + reg = <0x21>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio@0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +};
> +
> +&i2c9 {
> + /* cpld */
> + status = "okay";
> +};
> +
> +&i2c10 {
> + status = "okay";
> +
> + pca4: pca9555@24 {
> + compatible = "nxp,pca9555";
> + reg = <0x24>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio@0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> + pca5: pca9555@25 {
> + compatible = "nxp,pca9555";
> + reg = <0x25>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio@0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +};
> +
> +&i2c11 {
> + status = "okay";
> +
> + power-supply@58 {
> + compatible = "inspur,ipsps1";
> + reg = <0x58>;
> + };
> +
> + power-supply@59 {
> + compatible = "inspur,ipsps1";
> + reg = <0x59>;
> + };
> +};
> +
> +&i2c12 {
> + status = "okay";
> +};
> +
> +&i2c13 {
> + status = "okay";
> +};
> +
> +&pwm_tacho {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
> + &pinctrl_pwm2_default &pinctrl_pwm3_default
> + &pinctrl_pwm4_default &pinctrl_pwm5_default
> + &pinctrl_pwm6_default &pinctrl_pwm7_default>;
> +
> + fan@0 {
> + reg = <0x00>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
> + };
> +
> + fan@1 {
> + reg = <0x01>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
> + };
> +
> + fan@2 {
> + reg = <0x02>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
> + };
> +
> + fan@3 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
> + };
> +
> + fan@4 {
> + reg = <0x04>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
> + };
> +
> + fan@5 {
> + reg = <0x05>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
> + };
> +
> + fan@6 {
> + reg = <0x06>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
> + };
> +
> + fan@7 {
> + reg = <0x07>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
> + };
> +};
> +
> +&kcs3 {
> + status = "okay";
> + aspeed,lpc-io-reg = <0xca2>;
> +};
> +
> +&kcs4 {
> + status = "okay";
> + aspeed,lpc-io-reg = <0xca4>;
> +};
> +
> +&adc {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
> + &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
> + &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
> + &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
> + &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
> + &pinctrl_adc14_default &pinctrl_adc15_default>;
> +};
> +
> +&vhub {
> + status = "okay";
> +};
> +
> +&video {
> + status = "okay";
> + memory-region = <&video_engine_memory>;
> +};
> +
> +&vuart {
> + status = "okay";
> +};
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v4 1/1] ARM: dts: aspeed: Add Inspur NF5280M6 BMC machine
2021-07-13 11:47 ` Ping Guo
@ 2021-07-16 6:40 ` Joel Stanley
0 siblings, 0 replies; 3+ messages in thread
From: Joel Stanley @ 2021-07-16 6:40 UTC (permalink / raw)
To: Ping Guo
Cc: Andrew Jeffery, OpenBMC Maillist, guoping, banht, liuxiwei, wangxinglong
On Tue, 13 Jul 2021 at 11:48, Ping Guo <guopingjn@gmail.com> wrote:
>
> Hi Joel,
>
> Thanks for your reviews before.
>
> I want to konw wherther this patch could be merged or there are still
> problems to fix before that.
>
> Please help review this patch again.Thank you!
Reviewed-by: Joel Stanley <joel@jms.id.au>
It looks good now. It will be merged into v5.15. I have also put it in
the openbmc dev-5.10 tree.
>
> On 5/26/21 5:22 PM, guopingjn@gmail.com wrote:
> > From: Ping Guo <guoping@inspur.com>
> >
> > The Inspur NF5280M6 is an x86 platform server with an AST2500-based BMC.
> > This dts file provides a basic configuration for its OpenBMC
> > development.
> >
> > Signed-off-by: George Liu <liuxiwei@inspur.com>
> > Signed-off-by: Ping Guo <guoping@inspur.com>
> > ---
> > changelog:
> > v4:
> > -Remove invalid gpios_property
> > -Remove unused GFX device node
> > -Update KCS binding to the newer style
> > v3:
> > -Remove unnecessary lpc_ctrl node
> > -Remove unnecessary gfx_memory,flash_memory
> > v2:
> > -Remove unavailable uart-clock-high-speed property
> >
> > arch/arm/boot/dts/Makefile | 1 +
> > .../boot/dts/aspeed-bmc-inspur-nf5280m6.dts | 691 ++++++++++++++++++
> > 2 files changed, 692 insertions(+)
> > create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 03b5424bafa8..cc2580f1e99b 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -1405,6 +1405,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> > aspeed-bmc-ibm-rainier-4u.dtb \
> > aspeed-bmc-intel-s2600wf.dtb \
> > aspeed-bmc-inspur-fp5280g2.dtb \
> > + aspeed-bmc-inspur-nf5280m6.dtb \
> > aspeed-bmc-lenovo-hr630.dtb \
> > aspeed-bmc-lenovo-hr855xg2.dtb \
> > aspeed-bmc-microsoft-olympus.dtb \
> > diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
> > new file mode 100644
> > index 000000000000..43eb3f476914
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
> > @@ -0,0 +1,691 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +// Copyright (c) 2021 Inspur Corporation
> > +/dts-v1/;
> > +
> > +#include "aspeed-g5.dtsi"
> > +#include <dt-bindings/gpio/aspeed-gpio.h>
> > +#include <dt-bindings/i2c/i2c.h>
> > +#include <dt-bindings/leds/leds-pca955x.h>
> > +
> > +/ {
> > + model = "NF5280M6 BMC";
> > + compatible = "inspur,nf5280m6-bmc", "aspeed,ast2500";
> > +
> > + chosen {
> > + stdout-path = &uart5;
> > + bootargs = "console=ttyS4,115200 earlyprintk";
> > + };
> > +
> > + memory@80000000 {
> > + reg = <0x80000000 0x40000000>;
> > + };
> > +
> > + reserved-memory {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges;
> > +
> > + vga_memory: framebuffer@9f000000 {
> > + no-map;
> > + reg = <0x9f000000 0x01000000>; /* 16M */
> > + };
> > +
> > + video_engine_memory: jpegbuffer {
> > + size = <0x02000000>; /* 32M */
> > + alignment = <0x01000000>;
> > + compatible = "shared-dma-pool";
> > + reusable;
> > + };
> > + };
> > +
> > + leds {
> > + compatible = "gpio-leds";
> > +
> > + bmc_alive {
> > + label = "bmc_alive";
> > + gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
> > + linux,default-trigger = "timer";
> > + led-pattern = <1000 1000>;
> > + };
> > +
> > + front-fan {
> > + label = "front-fan";
> > + gpios = <&gpio ASPEED_GPIO(F,2) GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + front-psu {
> > + label = "front-psu";
> > + gpios = <&gpio ASPEED_GPIO(F,3) GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + front-syshot {
> > + label = "front-syshot";
> > + gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + front-memory {
> > + label = "front-memory";
> > + gpios = <&gpio ASPEED_GPIO(S, 7) GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + identify {
> > + label = "identify";
> > + gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
> > + };
> > + };
> > +
> > + iio-hwmon {
> > + compatible = "iio-hwmon";
> > + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
> > + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
> > + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
> > + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
> > + };
> > +};
> > +
> > +&fmc {
> > + status = "okay";
> > + flash@0 {
> > + status = "okay";
> > + m25p,fast-read;
> > + label = "bmc";
> > + spi-max-frequency = <50000000>;
> > +#include "openbmc-flash-layout.dtsi"
> > + };
> > +};
> > +
> > +&spi1 {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_spi1_default>;
> > + flash@0 {
> > + status = "okay";
> > + m25p,fast-read;
> > + label = "bios";
> > + spi-max-frequency = <100000000>;
> > + };
> > +};
> > +
> > +&uart1 {
> > + status = "okay";
> > +};
> > +
> > +&uart5 {
> > + status = "okay";
> > +};
> > +
> > +&mac0 {
> > + status = "okay";
> > +
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_rmii1_default>;
> > + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
> > + <&syscon ASPEED_CLK_MAC1RCLK>;
> > + clock-names = "MACCLK", "RCLK";
> > + use-ncsi;
> > +};
> > +
> > +&mac1 {
> > + status = "okay";
> > +
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> > +};
> > +
> > +&gpio {
> > + status = "okay";
> > + /* Enable GPIOE0 and GPIOE2 pass-through by default */
> > + pinctrl-names = "pass-through";
> > + pinctrl-0 = <&pinctrl_gpie0_default
> > + &pinctrl_gpie2_default>;
> > + gpio-line-names =
> > + /*A0-A7*/ "","MAC2LINK","BMC_RESET_CPLD","","BMC_SCL9","","MAC2MDC_R","",
> > + /*B0-B7*/ "BMC_INIT_OK","FM_SKU_ID2","FM_SPD_DDRCPU_LVLSHFT_DIS_R_N",
> > + "FM_CPU_MSMI_CATERR_LVT3_BMC_N","","FM_CPU0_PROCHOT_LVT3_N",
> > + "FM_CPU_MEM_THERMTRIP_LVT3_N","BIOS_LOAD_DEFAULT_R_N",
> > + /*C0-C7*/ "","","","","","","","",
> > + /*D0-D7*/ "","BMC_SD2CMD","BMC_SD2DAT0","BMC_SD2DAT1","BMC_SD2DAT2",
> > + "BMC_SD2DAT3","BMC_SD2DET","BMC_SD2WPT",
> > + /*E0-E7*/ "FM_BOARD_ID0","FM_BOARD_ID1","FM_BOARD_ID2","FM_BOARD_ID3",
> > + "FM_BOARD_ID4","FM_BOARD_ID5","","",
> > + /*F0-F7*/ "PSU1_PRESENT_N","PSU2_PRESENT_N","FAN_FAULT_LED_N","PSU_FAULT_LED_N",
> > + "BIOS_DEBUG_MODE_N","FP_LCD_RESET","FAN_TYPE_SEL",
> > + "RST_GLB_RST_WARN_N",
> > + /*G0-G7*/ "IRQ_LPTM21L_ALERT_N","IRQ_PLD_ALERT_N","AC_FAIL_N","FP_LCD_PRESENT_BMC",
> > + "BMC_JTAG_TCK_MUX_SEL","BMC_BIOS_RESERVED","SYS_NMI_N","BMC_NMI_N",
> > + /*H0-H7*/ "JTAG_BMC_TDI","JTAG_BMC_TDO","JTAG_BMC_TCK","JTAG_BMC_TMS","FM_BOARD_ID6",
> > + "FM_SKU_ID0","IRQ_SML1_PMBUS_ALERT_N","IRQ_SML0_ALERT_MUX_N",
> > + /*I0-I7*/ "FM_CPU_ERR0_LVT3_BMC_N","FM_CPU_ERR1_LVT3_BMC_N","FM_BMC_PCH_SCI_LPC_N",
> > + "FM_SYS_THROTTLE_LVC3","SPI2_PCH_CS0_N","","","",
> > + /*J0-J7*/ "FM_CPU0_SKTOCC_LVT3_N","FM_CPU1_SKTOCC_LVT3_N","","SYSHOT_FAULT_LED_N",
> > + "VGA_HSYNC","VGA_VSYNC","","",
> > + /*K0-K7*/ "","","","","","","","",
> > + /*L0-L7*/ "","","","","","","SYS_UART_TXD1","SYS_UART_RXD1",
> > + /*M0-M7*/ "","","","","","","","",
> > + /*N0-N7*/ "","","","","","","","",
> > + /*O0-O7*/ "","","","","","","","",
> > + /*P0-P7*/ "","","","","","","","",
> > + /*Q0-Q7*/ "","","","","","","FM_PCH_BMC_THERMTRIP_N","INTRUDER_N",
> > + /*R0-R7*/ "SPI_BMC_BOOT_CS1_R_N","FM_CPU_MEMHOT_LVC3_N",
> > + "DBP_CPU_PREQ_N","FM_CPU_ERR2_LVT3_BMC_N",
> > + "RISER_NCSI_EN_N","","LOM_NCSI_EN_N","OCP_NCSI_EN_N",
> > + /*S0-S7*/ "BMC_XDP_PRDY_N","SIO_POWER_GOOD","BMC_PWR_DEBUG_R_N","BMC_DEBUG_EN_R_N","",
> > + "GPIOS5_BMC","","GPIOS7_BMC",
> > + /*T0-T7*/ "","","","","","","","",
> > + /*U0-U7*/ "","","","","","","","",
> > + /*V0-V7*/ "","","","","","","","",
> > + /*W0-W7*/ "","","","","","","","",
> > + /*X0-X7*/ "","","","","","","","",
> > + /*Y0-Y7*/ "","BMC_DET_UID_N","BMC_JTAG_SEL","SIO_ONCONTROL","","","","",
> > + /*Z0-Z7*/ "XDP_PRESENT_N","DBP_SYSPWROK","BMC_JTAG_SEL","FM_SMI_ACTIVE_N","",
> > + "GPIOZ5","","",
> > + /*AA0-AA7*/ "FP_BMC_SYSLED_N","PS_PWROK","RST_PLTRST_BMC_N","HDA_SDO_BMC",
> > + "FM_SLPS4_R_N","","POWER_BUTTON","POWER_OUT",
> > + /*AB0-AB7*/ "RESET_OUT","RESET_BUTTON","BIOS_REFLASH","POST_COMPLETE","","","","",
> > + /*AC0-AC7*/ "","","","","","","","";
> > +};
> > +
> > +&i2c0 {
> > + /* FP_LCD */
> > + status = "okay";
> > +};
> > +
> > +&i2c1 {
> > + status = "okay";
> > +
> > + eeprom@50 {
> > + compatible = "atmel,24c256";
> > + reg = <0x50>;
> > + label = "fru";
> > + };
> > +};
> > +
> > +&i2c2 {
> > + status = "okay";
> > +
> > + tmp112@48 {
> > + compatible = "ti,tmp112";
> > + reg = <0x48>;
> > + label = "inlet";
> > + };
> > +
> > + tmp112@49 {
> > + compatible = "ti,tmp112";
> > + reg = <0x49>;
> > + label = "outlet";
> > + };
> > +
> > + pca9548@70 {
> > + compatible = "nxp,pca9548";
> > + reg = <0x70>;
> > + };
> > +};
> > +
> > +&i2c3 {
> > + status = "okay";
> > +
> > + pca9548@70 {
> > + compatible = "nxp,pca9548";
> > + reg = <0x70>;
> > + };
> > +
> > + pca9548@71 {
> > + compatible = "nxp,pca9548";
> > + reg = <0x71>;
> > + };
> > +
> > + pca9548@72 {
> > + compatible = "nxp,pca9548";
> > + reg = <0x72>;
> > + };
> > +};
> > +
> > +&i2c4 {
> > + /* IPMB */
> > + status = "okay";
> > +};
> > +
> > +&i2c5 {
> > + status = "okay";
> > +
> > + pca9548@70 {
> > + compatible = "nxp,pca9548";
> > + reg = <0x70>;
> > + };
> > +};
> > +
> > +&i2c6 {
> > + status = "okay";
> > +
> > + pca9548@70 {
> > + compatible = "nxp,pca9548";
> > + reg = <0x70>;
> > + };
> > +};
> > +
> > +&i2c7 {
> > + status = "okay";
> > +
> > + adm1278@33 {
> > + compatible = "adi,adm1293";
> > + reg = <0x33>;
> > + };
> > +
> > + adm1278@32 {
> > + compatible = "adi,adm1293";
> > + reg = <0x32>;
> > + };
> > +
> > + adm1278@20 {
> > + compatible = "adi,adm1293";
> > + reg = <0x20>;
> > + };
> > +};
> > +
> > +&i2c8 {
> > + status = "okay";
> > +
> > + pca0: pca9555@23 {
> > + compatible = "nxp,pca9555";
> > + reg = <0x23>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio@0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > + pca1: pca9555@22 {
> > + compatible = "nxp,pca9555";
> > + reg = <0x22>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio@0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > + pca2: pca9555@20 {
> > + compatible = "nxp,pca9555";
> > + reg = <0x20>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio@0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > + pca3: pca9555@21 {
> > + compatible = "nxp,pca9555";
> > + reg = <0x21>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio@0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +};
> > +
> > +&i2c9 {
> > + /* cpld */
> > + status = "okay";
> > +};
> > +
> > +&i2c10 {
> > + status = "okay";
> > +
> > + pca4: pca9555@24 {
> > + compatible = "nxp,pca9555";
> > + reg = <0x24>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio@0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > + pca5: pca9555@25 {
> > + compatible = "nxp,pca9555";
> > + reg = <0x25>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio@0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +};
> > +
> > +&i2c11 {
> > + status = "okay";
> > +
> > + power-supply@58 {
> > + compatible = "inspur,ipsps1";
> > + reg = <0x58>;
> > + };
> > +
> > + power-supply@59 {
> > + compatible = "inspur,ipsps1";
> > + reg = <0x59>;
> > + };
> > +};
> > +
> > +&i2c12 {
> > + status = "okay";
> > +};
> > +
> > +&i2c13 {
> > + status = "okay";
> > +};
> > +
> > +&pwm_tacho {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
> > + &pinctrl_pwm2_default &pinctrl_pwm3_default
> > + &pinctrl_pwm4_default &pinctrl_pwm5_default
> > + &pinctrl_pwm6_default &pinctrl_pwm7_default>;
> > +
> > + fan@0 {
> > + reg = <0x00>;
> > + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
> > + };
> > +
> > + fan@1 {
> > + reg = <0x01>;
> > + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
> > + };
> > +
> > + fan@2 {
> > + reg = <0x02>;
> > + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
> > + };
> > +
> > + fan@3 {
> > + reg = <0x03>;
> > + aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
> > + };
> > +
> > + fan@4 {
> > + reg = <0x04>;
> > + aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
> > + };
> > +
> > + fan@5 {
> > + reg = <0x05>;
> > + aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
> > + };
> > +
> > + fan@6 {
> > + reg = <0x06>;
> > + aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
> > + };
> > +
> > + fan@7 {
> > + reg = <0x07>;
> > + aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
> > + };
> > +};
> > +
> > +&kcs3 {
> > + status = "okay";
> > + aspeed,lpc-io-reg = <0xca2>;
> > +};
> > +
> > +&kcs4 {
> > + status = "okay";
> > + aspeed,lpc-io-reg = <0xca4>;
> > +};
> > +
> > +&adc {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
> > + &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
> > + &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
> > + &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
> > + &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
> > + &pinctrl_adc14_default &pinctrl_adc15_default>;
> > +};
> > +
> > +&vhub {
> > + status = "okay";
> > +};
> > +
> > +&video {
> > + status = "okay";
> > + memory-region = <&video_engine_memory>;
> > +};
> > +
> > +&vuart {
> > + status = "okay";
> > +};
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-07-16 6:41 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-26 9:22 [PATCH v4 1/1] ARM: dts: aspeed: Add Inspur NF5280M6 BMC machine guopingjn
2021-07-13 11:47 ` Ping Guo
2021-07-16 6:40 ` Joel Stanley
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).