From: Quan Nguyen <quan@os.amperecomputing.com>
To: Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@aj.id.au>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
OpenBMC Maillist <openbmc@lists.ozlabs.org>
Cc: Open Source Submission <patches@amperecomputing.com>,
"Thang Q . Nguyen" <thang@os.amperecomputing.com>,
Phong Vo <phong@os.amperecomputing.com>
Subject: [PATCH v2 2/3] ARM: dts: aspeed: mtjade: Add I2C buses for NVMe devices
Date: Tue, 19 Oct 2021 13:01:54 +0700 [thread overview]
Message-ID: <20211019060155.945-3-quan@os.amperecomputing.com> (raw)
In-Reply-To: <20211019060155.945-1-quan@os.amperecomputing.com>
This commit adds configuration i2c busses for 24 NVMe slots and
2 M2 NVMe slots found on Mt.Jade hardware reference platform
with Ampere's Altra processor family.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
---
v2:
+ Introduced in v2
.../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 258 ++++++++++++++++++
1 file changed, 258 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
index 3515d55bd312..723c7063c223 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
@@ -7,6 +7,50 @@ / {
model = "Ampere Mt. Jade BMC";
compatible = "ampere,mtjade-bmc", "aspeed,ast2500";
+ aliases {
+ /*
+ * i2c bus 50-57 assigned to NVMe slot 0-7
+ */
+ i2c50 = &nvmeslot_0;
+ i2c51 = &nvmeslot_1;
+ i2c52 = &nvmeslot_2;
+ i2c53 = &nvmeslot_3;
+ i2c54 = &nvmeslot_4;
+ i2c55 = &nvmeslot_5;
+ i2c56 = &nvmeslot_6;
+ i2c57 = &nvmeslot_7;
+
+ /*
+ * i2c bus 60-67 assigned to NVMe slot 8-15
+ */
+ i2c60 = &nvmeslot_8;
+ i2c61 = &nvmeslot_9;
+ i2c62 = &nvmeslot_10;
+ i2c63 = &nvmeslot_11;
+ i2c64 = &nvmeslot_12;
+ i2c65 = &nvmeslot_13;
+ i2c66 = &nvmeslot_14;
+ i2c67 = &nvmeslot_15;
+
+ /*
+ * i2c bus 70-77 assigned to NVMe slot 16-23
+ */
+ i2c70 = &nvmeslot_16;
+ i2c71 = &nvmeslot_17;
+ i2c72 = &nvmeslot_18;
+ i2c73 = &nvmeslot_19;
+ i2c74 = &nvmeslot_20;
+ i2c75 = &nvmeslot_21;
+ i2c76 = &nvmeslot_22;
+ i2c77 = &nvmeslot_23;
+
+ /*
+ * i2c bus 80-81 assigned to NVMe M2 slot 0-1
+ */
+ i2c80 = &nvme_m2_0;
+ i2c81 = &nvme_m2_1;
+ };
+
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200 earlycon";
@@ -445,6 +489,220 @@ rtc@51 {
&i2c5 {
status = "okay";
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ nvmeslot_0_7: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+ };
+ };
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+ i2c-mux-idle-disconnect;
+
+ nvmeslot_8_15: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+ };
+
+ nvmeslot_16_23: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+ };
+
+ };
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9545";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72>;
+ i2c-mux-idle-disconnect;
+
+ nvme_m2_0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ };
+
+ nvme_m2_1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ };
+ };
+};
+
+&nvmeslot_0_7 {
+ status = "okay";
+
+ i2c-mux@75 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c-mux-idle-disconnect;
+
+ nvmeslot_0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ };
+ nvmeslot_1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ };
+ nvmeslot_2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ };
+ nvmeslot_3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+ };
+ nvmeslot_4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+ };
+ nvmeslot_5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+ };
+ nvmeslot_6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6>;
+ };
+ nvmeslot_7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7>;
+ };
+
+ };
+};
+
+&nvmeslot_8_15 {
+ status = "okay";
+
+ i2c-mux@75 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c-mux-idle-disconnect;
+
+ nvmeslot_8: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ };
+ nvmeslot_9: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ };
+ nvmeslot_10: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ };
+ nvmeslot_11: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+ };
+ nvmeslot_12: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+ };
+ nvmeslot_13: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+ };
+ nvmeslot_14: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6>;
+ };
+ nvmeslot_15: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7>;
+ };
+ };
+};
+
+&nvmeslot_16_23 {
+ status = "okay";
+
+ i2c-mux@75 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c-mux-idle-disconnect;
+
+ nvmeslot_16: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ };
+ nvmeslot_17: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ };
+ nvmeslot_18: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ };
+ nvmeslot_19: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+ };
+ nvmeslot_20: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+ };
+ nvmeslot_21: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+ };
+ nvmeslot_22: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6>;
+ };
+ nvmeslot_23: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7>;
+ };
+ };
};
&i2c6 {
--
2.28.0
next prev parent reply other threads:[~2021-10-19 6:21 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-19 6:01 [PATCH v2 0/3] Update gpios, nvme i2c busses and uefi partition Quan Nguyen
2021-10-19 6:01 ` [PATCH v2 1/3] ARM: dts: aspeed: mtjade: Add some gpios Quan Nguyen
2021-10-19 6:46 ` Joel Stanley
2021-10-19 10:37 ` Thang Nguyen
2021-10-25 4:44 ` Quan Nguyen
2021-11-01 9:25 ` Quan Nguyen
2021-11-16 5:24 ` Joel Stanley
2021-10-19 6:01 ` Quan Nguyen [this message]
2021-10-19 6:46 ` [PATCH v2 2/3] ARM: dts: aspeed: mtjade: Add I2C buses for NVMe devices Joel Stanley
2021-10-19 6:01 ` [PATCH v2 3/3] ARM: dts: aspeed: mtjade: Add uefi partition Quan Nguyen
2021-10-19 6:46 ` Joel Stanley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211019060155.945-3-quan@os.amperecomputing.com \
--to=quan@os.amperecomputing.com \
--cc=andrew@aj.id.au \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=patches@amperecomputing.com \
--cc=phong@os.amperecomputing.com \
--cc=robh+dt@kernel.org \
--cc=thang@os.amperecomputing.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).