* [PATCH] ARM: dts: nuvoton: Fix flash layout This change satisfy OpenBMC requirements for flash layout.
@ 2021-02-11 8:34 gmouse
2021-02-11 8:34 ` [PATCH] ARM: dts: nuvoton: Add Fii Kudo system gmouse
2021-02-11 16:15 ` [PATCH] ARM: dts: nuvoton: Fix flash layout This change satisfy OpenBMC requirements for flash layout Anton Kachalov
0 siblings, 2 replies; 9+ messages in thread
From: gmouse @ 2021-02-11 8:34 UTC (permalink / raw)
To: openbmc; +Cc: Anton D. Kachalov
From: "Anton D. Kachalov" <gmouse@google.com>
Signed-off-by: Anton D. Kachalov <gmouse@google.com>
---
arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++----------------
1 file changed, 8 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
index bd1eb6ee380f..741c1fee8552 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
@@ -182,8 +182,8 @@ bbuboot2@80000 {
reg = <0x0080000 0x80000>;
read-only;
};
- envparam@100000 {
- label = "env-param";
+ ubootenv@100000 {
+ label = "u-boot-env";
reg = <0x0100000 0x40000>;
read-only;
};
@@ -195,25 +195,13 @@ kernel@200000 {
label = "kernel";
reg = <0x0200000 0x400000>;
};
- rootfs@600000 {
- label = "rootfs";
- reg = <0x0600000 0x700000>;
+ rofs@780000 {
+ label = "rofs";
+ reg = <0x0780000 0x1680000>;
};
- spare1@D00000 {
- label = "spare1";
- reg = <0x0D00000 0x200000>;
- };
- spare2@0F00000 {
- label = "spare2";
- reg = <0x0F00000 0x200000>;
- };
- spare3@1100000 {
- label = "spare3";
- reg = <0x1100000 0x200000>;
- };
- spare4@1300000 {
- label = "spare4";
- reg = <0x1300000 0x0>;
+ rwfs@1e00000 {
+ label = "rwfs";
+ reg = <0x1e00000 0x200000>;
};
};
};
--
2.30.0.478.g8a0d178c01-goog
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH] ARM: dts: nuvoton: Add Fii Kudo system
2021-02-11 8:34 [PATCH] ARM: dts: nuvoton: Fix flash layout This change satisfy OpenBMC requirements for flash layout gmouse
@ 2021-02-11 8:34 ` gmouse
2021-02-11 9:24 ` Joel Stanley
2021-02-11 16:15 ` [PATCH] ARM: dts: nuvoton: Fix flash layout This change satisfy OpenBMC requirements for flash layout Anton Kachalov
1 sibling, 1 reply; 9+ messages in thread
From: gmouse @ 2021-02-11 8:34 UTC (permalink / raw)
To: openbmc
Cc: Mohaimen alsmarai, Benjamin Fair, Mustatfa Shehabi,
Vivekanand Veeracholan, Lancelot Kao
From: Lancelot Kao <lancelot.kao@fii-usa.com>
Add device tree for the Kudo BMC. Kudo is an Ampere (Altra)
server platform manufactured by Fii and is based on a Nuvoton
NPCM730 SoC.
OpenBMC-Staging-Count: 1
Signed-off-by: Mustatfa Shehabi <Mustafa.Shehabi@fii-na.com>
Signed-off-by: Mohaimen alsmarai <Mohaimen.alsamarai@fii-na.com>
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Reviewed-by: Vivekanand Veeracholan <vveerach@google.com>
Reviewed-by: Benjamin Fair <benjaminfair@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201116232127.7066-1-lancelot.kao@fii-usa.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/nuvoton-npcm730-kudo.dts | 872 +++++++++++++++++++++
2 files changed, 873 insertions(+)
create mode 100644 arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9a2ab5e6e924..5fd12e8909d3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -338,6 +338,7 @@ dtb-$(CONFIG_ARCH_LPC32XX) += \
lpc3250-phy3250.dtb
dtb-$(CONFIG_ARCH_NPCM7XX) += \
nuvoton-npcm730-gsj.dtb \
+ nuvoton-npcm730-kudo.dtb \
nuvoton-npcm750-evb.dtb \
nuvoton-npcm750-runbmc-olympus.dtb
dtb-$(CONFIG_MACH_MESON6) += \
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
new file mode 100644
index 000000000000..0b65505333bc
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
@@ -0,0 +1,872 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Fii USA Inc.
+
+/dts-v1/;
+#include "nuvoton-npcm730.dtsi"
+
+/ {
+ model = "Fii Kudo Board";
+ compatible = "fii,kudo", "nuvoton,npcm730";
+
+ aliases {
+ ethernet0 = &emc0;
+ ethernet1 = &gmac0;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ udc9 = &udc9;
+ emmc0 = &sdhci0;
+ vdma = &vdma;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ i2c9 = &i2c9;
+ i2c10 = &i2c10;
+ i2c11 = &i2c11;
+ i2c12 = &i2c12;
+ i2c13 = &i2c13;
+ i2c14 = &i2c14;
+ i2c15 = &i2c15;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ fiu0 = &fiu0;
+ fiu1 = &fiu3;
+ };
+
+ chosen {
+ stdout-path = &serial3;
+ };
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+ };
+
+ jtag_master {
+ compatible = "nuvoton,npcm750-jtag-master";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ // dev/jtag0
+ dev-num = <0>;
+ // pspi or gpio
+ mode = "pspi";
+
+ // pspi2
+ pspi-controller = <2>;
+ reg = <0xf0201000 0x1000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_APB5>;
+
+ // TCK, TDI, TDO, TMS
+ jtag-gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>,
+ <&gpio0 18 GPIO_ACTIVE_HIGH>,
+ <&gpio0 17 GPIO_ACTIVE_HIGH>,
+ <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ heartbeat {
+ label = "heartbeat";
+ gpios = <&gpio0 14 1>;
+ };
+ };
+
+ pinctrl: pinctrl@f0800000 {
+ gpio61oh_pins: gpio61oh-pins {
+ pins = "GPO61/nDTR1_BOUT1/STRAP6";
+ bias-disable;
+ output-high;
+ };
+ gpio62oh_pins: gpio62oh-pins {
+ pins = "GPO62/nRTST1/STRAP5";
+ bias-disable;
+ output-high;
+ };
+ gpio161ol_pins: gpio161ol-pins {
+ pins = "GPIO161/nLFRAME/nESPICS";
+ bias-disable;
+ output-low;
+ };
+ gpio163i_pins: gpio163i-pins {
+ pins = "GPIO163/LCLK/ESPICLK";
+ bias-disable;
+ input-enable;
+ };
+ gpio167ol_pins: gpio167ol-pins {
+ pins = "GPIO167/LAD3/ESPI_IO3";
+ bias-disable;
+ output-low;
+ };
+ gpio95i_pins: gpio95i-pins {
+ pins = "GPIO95/nLRESET/nESPIRST";
+ bias-disable;
+ input-enable;
+ };
+ gpio65ol_pins: gpio65ol-pins {
+ pins = "GPIO65/FANIN1";
+ bias-disable;
+ output-low;
+ };
+ gpio66oh_pins: gpio66oh-pins {
+ pins = "GPIO66/FANIN2";
+ bias-disable;
+ output-high;
+ };
+ gpio67oh_pins: gpio67oh-pins {
+ pins = "GPIO67/FANIN3";
+ bias-disable;
+ output-high;
+ };
+ gpio68ol_pins: gpio68ol-pins {
+ pins = "GPIO68/FANIN4";
+ bias-disable;
+ output-low;
+ };
+ gpio69i_pins: gpio69i-pins {
+ pins = "GPIO69/FANIN5";
+ bias-disable;
+ input-enable;
+ };
+ gpio70ol_pins: gpio70ol-pins {
+ pins = "GPIO70/FANIN6";
+ bias-disable;
+ output-low;
+ };
+ gpio71i_pins: gpio71i-pins {
+ pins = "GPIO71/FANIN7";
+ bias-disable;
+ input-enable;
+ };
+ gpio72i_pins: gpio72i-pins {
+ pins = "GPIO72/FANIN8";
+ bias-disable;
+ input-enable;
+ };
+ gpio73i_pins: gpio73i-pins {
+ pins = "GPIO73/FANIN9";
+ bias-disable;
+ input-enable;
+ };
+ gpio74i_pins: gpio74i-pins {
+ pins = "GPIO74/FANIN10";
+ bias-disable;
+ input-enable;
+ };
+ gpio75i_pins: gpio75i-pins {
+ pins = "GPIO75/FANIN11";
+ bias-disable;
+ input-enable;
+ };
+ gpio76i_pins: gpio76i-pins {
+ pins = "GPIO76/FANIN12";
+ bias-disable;
+ input-enable;
+ };
+ gpio77i_pins: gpio77i-pins {
+ pins = "GPIO77/FANIN13";
+ bias-disable;
+ input-enable;
+ };
+ gpio78i_pins: gpio78i-pins {
+ pins = "GPIO78/FANIN14";
+ bias-disable;
+ input-enable;
+ };
+ gpio79ol_pins: gpio79ol-pins {
+ pins = "GPIO79/FANIN15";
+ bias-disable;
+ output-low;
+ };
+ gpio80oh_pins: gpio80oh-pins {
+ pins = "GPIO80/PWM0";
+ bias-disable;
+ output-high;
+ };
+ gpio81i_pins: gpio81i-pins {
+ pins = "GPIO81/PWM1";
+ bias-disable;
+ input-enable;
+ };
+ gpio82i_pins: gpio82i-pins {
+ pins = "GPIO82/PWM2";
+ bias-disable;
+ input-enable;
+ };
+ gpio83i_pins: gpio83i-pins {
+ pins = "GPIO83/PWM3";
+ bias-disable;
+ input-enable;
+ };
+ gpio144i_pins: gpio144i-pins {
+ pins = "GPIO144/PWM4";
+ bias-disable;
+ input-enable;
+ };
+ gpio145i_pins: gpio145i-pins {
+ pins = "GPIO145/PWM5";
+ bias-disable;
+ input-enable;
+ };
+ gpio146i_pins: gpio146i-pins {
+ pins = "GPIO146/PWM6";
+ bias-disable;
+ input-enable;
+ };
+ gpio147oh_pins: gpio147oh-pins {
+ pins = "GPIO147/PWM7";
+ bias-disable;
+ output-high;
+ };
+ gpio168ol_pins: gpio168ol-pins {
+ pins = "GPIO168/nCLKRUN/nESPIALERT";
+ bias-disable;
+ output-low;
+ };
+ gpio169oh_pins: gpio169oh-pins {
+ pins = "GPIO169/nSCIPME";
+ bias-disable;
+ output-high;
+ };
+ gpio170ol_pins: gpio170ol-pins {
+ pins = "GPIO170/nSMI";
+ bias-disable;
+ output-low;
+ };
+ gpio218oh_pins: gpio218oh-pins {
+ pins = "GPIO218/nWDO1";
+ bias-disable;
+ output-high;
+ };
+ gpio37i_pins: gpio37i-pins {
+ pins = "GPIO37/SMB3CSDA";
+ bias-disable;
+ input-enable;
+ };
+ gpio38i_pins: gpio38i-pins {
+ pins = "GPIO38/SMB3CSCL";
+ bias-disable;
+ input-enable;
+ };
+ gpio39i_pins: gpio39i-pins {
+ pins = "GPIO39/SMB3BSDA";
+ bias-disable;
+ input-enable;
+ };
+ gpio40i_pins: gpio40i-pins {
+ pins = "GPIO40/SMB3BSCL";
+ bias-disable;
+ input-enable;
+ };
+ gpio121i_pins: gpio121i-pins {
+ pins = "GPIO121/SMB2CSCL";
+ bias-disable;
+ input-enable;
+ };
+ gpio122i_pins: gpio122i-pins {
+ pins = "GPIO122/SMB2BSDA";
+ bias-disable;
+ input-enable;
+ };
+ gpio123i_pins: gpio123i-pins {
+ pins = "GPIO123/SMB2BSCL";
+ bias-disable;
+ input-enable;
+ };
+ gpio124i_pins: gpio124i-pins {
+ pins = "GPIO124/SMB1CSDA";
+ bias-disable;
+ input-enable;
+ };
+ gpio125i_pins: gpio125i-pins {
+ pins = "GPIO125/SMB1CSCL";
+ bias-disable;
+ input-enable;
+ };
+ gpio126i_pins: gpio126i-pins {
+ pins = "GPIO126/SMB1BSDA";
+ bias-disable;
+ input-enable;
+ };
+ gpio127i_pins: gpio127i-pins {
+ pins = "GPIO127/SMB1BSCL";
+ bias-disable;
+ input-enable;
+ };
+ gpio136i_pins: gpio136i-pins {
+ pins = "GPIO136/SD1DT0";
+ bias-disable;
+ input-enable;
+ };
+ gpio137oh_pins: gpio137oh-pins {
+ pins = "GPIO137/SD1DT1";
+ bias-disable;
+ output-high;
+ };
+ gpio138i_pins: gpio138i-pins {
+ pins = "GPIO138/SD1DT2";
+ bias-disable;
+ input-enable;
+ };
+ gpio139i_pins: gpio139i-pins {
+ pins = "GPIO139/SD1DT3";
+ bias-disable;
+ input-enable;
+ };
+ gpio140i_pins: gpio140i-pins {
+ pins = "GPIO140/SD1CLK";
+ bias-disable;
+ input-enable;
+ };
+ gpio141i_pins: gpio141i-pins {
+ pins = "GPIO141/SD1WP";
+ bias-disable;
+ input-enable;
+ };
+ gpio190oh_pins: gpio190oh-pins {
+ pins = "GPIO190/nPRD_SMI";
+ bias-disable;
+ output-high;
+ };
+ gpio191oh_pins: gpio191oh-pins {
+ pins = "GPIO191";
+ bias-disable;
+ output-high;
+ };
+ gpio195ol_pins: gpio195ol-pins {
+ pins = "GPIO195/SMB0BSDA";
+ bias-disable;
+ output-low;
+ };
+ gpio196ol_pins: gpio196ol-pins {
+ pins = "GPIO196/SMB0CSCL";
+ bias-disable;
+ output-low;
+ };
+ gpio199i_pins: gpio199i-pins {
+ pins = "GPIO199/SMB0DSCL";
+ bias-disable;
+ input-enable;
+ };
+ gpio202ol_pins: gpio202ol-pins {
+ pins = "GPIO202/SMB0CSDA";
+ bias-disable;
+ output-low;
+ };
+ };
+};
+
+&gmac0 {
+ phy-mode = "rgmii-id";
+ snps,eee-force-disable;
+ status = "okay";
+};
+
+&emc0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&udc9 {
+ status = "okay";
+};
+
+&aes {
+ status = "okay";
+};
+
+&sha {
+ status = "okay";
+};
+
+&fiu0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0cs1_pins>;
+ status = "okay";
+ spi-nor@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ spi-rx-bus-width = <2>;
+ label = "bmc";
+ partitions@80000000 {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ u-boot@0 {
+ label = "u-boot";
+ reg = <0x0000000 0xC0000>;
+ read-only;
+ };
+ u-boot-env@100000{
+ label = "u-boot-env";
+ reg = <0x00100000 0x40000>;
+ };
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x0200000 0x600000>;
+ };
+ rofs@800000 {
+ label = "rofs";
+ reg = <0x800000 0x3500000>;
+ };
+ rwfs@3d00000 {
+ label = "rwfs";
+ reg = <0x3d00000 0x300000>;
+ };
+ };
+ };
+ spi-nor@1 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <1>;
+ spi-max-frequency = <5000000>;
+ spi-rx-bus-width = <2>;
+ partitions@88000000 {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spare1@0 {
+ label = "spi0-cs1-spare1";
+ reg = <0x0 0x800000>;
+ };
+ spare2@800000 {
+ label = "spi0-cs1-spare2";
+ reg = <0x800000 0x0>;
+ };
+ };
+ };
+};
+
+&fiu3 {
+ pinctrl-0 = <&spi3_pins>;
+ spi-nor@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ spi-rx-bus-width = <2>;
+ partitions@A0000000 {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ system1@0 {
+ label = "bios";
+ reg = <0x0 0x0>;
+ };
+ system2@800000 {
+ label = "spi3-system2";
+ reg = <0x800000 0x0>;
+ };
+ };
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&vdma {
+ status = "okay";
+};
+
+&pcimbox {
+ status = "okay";
+};
+
+&vcd {
+ status = "okay";
+};
+
+&ece {
+ status = "okay";
+};
+
+&watchdog1 {
+ status = "okay";
+};
+
+&rng {
+ status = "okay";
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&serial3 {
+ status = "okay";
+};
+
+&adc {
+ #io-channel-cells = <1>;
+ status = "okay";
+};
+
+&otp {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ i2c-switch@75 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c-mux-idle-disconnect;
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ // Rear-Fan
+ max31790@58 {
+ compatible = "maxim,max31790";
+ reg = <0x58>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ // Mid-Fan
+ max31790@58 {
+ compatible = "maxim,max31790";
+ reg = <0x58>;
+ };
+ };
+
+ i2c-bus@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ // INLET1_T
+ lm75@5c {
+ compatible = "ti,lm75";
+ reg = <0x5c>;
+ };
+ };
+
+ i2c-bus@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+
+ // OUTLET1_T
+ lm75@5c {
+ compatible = "ti,lm75";
+ reg = <0x5c>;
+ };
+ };
+
+ i2c-bus@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+
+ // OUTLET2_T
+ lm75@5c {
+ compatible = "ti,lm75";
+ reg = <0x5c>;
+ };
+ };
+
+ i2c-bus@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ // OUTLET3_T
+ lm75@5c {
+ compatible = "ti,lm75";
+ reg = <0x5c>;
+ };
+ };
+ };
+ i2c-switch@77 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+ i2c-mux-idle-disconnect;
+
+ i2c-bus@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ // STB-T
+ pmbus@74 {
+ compatible = "pmbus";
+ reg = <0x74>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ smpro@4f {
+ compatible = "ampere,smpro";
+ reg = <0x4f>;
+ };
+
+ smpro@4e {
+ compatible = "ampere,smpro";
+ reg = <0x4e>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+ i2c-switch@77 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+ i2c-mux-idle-disconnect;
+
+ i2c-bus@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ // ADC sensors
+ adm1266@40 {
+ compatible = "adi,adm1266";
+ reg = <0x40>;
+ };
+ };
+
+ i2c-bus@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // ADC sensors
+ adm1266@41 {
+ compatible = "adi,adm1266";
+ reg = <0x41>;
+ };
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&i2c12 {
+ status = "okay";
+ ssif-bmc@10 {
+ compatible = "ssif-bmc";
+ reg = <0x10>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+ i2c-switch@77 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+ i2c-mux-idle-disconnect;
+
+ i2c-bus@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ // M2_ZONE_T
+ lm75@28 {
+ compatible = "ti,lm75";
+ reg = <0x28>;
+ };
+ };
+
+ i2c-bus@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ // BATT_ZONE_T
+ lm75@29 {
+ compatible = "ti,lm75";
+ reg = <0x29>;
+ };
+ };
+
+ i2c-bus@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+
+ // NBM1_ZONE_T
+ lm75@28 {
+ compatible = "ti,lm75";
+ reg = <0x28>;
+ };
+ };
+ i2c-bus@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+
+ // NBM2_ZONE_T
+ lm75@29 {
+ compatible = "ti,lm75";
+ reg = <0x29>;
+ };
+ };
+ };
+};
+
+&i2c14 {
+ status = "okay";
+};
+
+&i2c15 {
+ status = "okay";
+};
+
+&spi0 {
+ cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &gpio61oh_pins
+ &gpio62oh_pins
+ &gpio161ol_pins
+ &gpio163i_pins
+ &gpio167ol_pins
+ &gpio95i_pins
+ &gpio65ol_pins
+ &gpio66oh_pins
+ &gpio67oh_pins
+ &gpio68ol_pins
+ &gpio69i_pins
+ &gpio70ol_pins
+ &gpio71i_pins
+ &gpio72i_pins
+ &gpio73i_pins
+ &gpio74i_pins
+ &gpio75i_pins
+ &gpio76i_pins
+ &gpio77i_pins
+ &gpio78i_pins
+ &gpio79ol_pins
+ &gpio80oh_pins
+ &gpio81i_pins
+ &gpio82i_pins
+ &gpio83i_pins
+ &gpio144i_pins
+ &gpio145i_pins
+ &gpio146i_pins
+ &gpio147oh_pins
+ &gpio168ol_pins
+ &gpio169oh_pins
+ &gpio170ol_pins
+ &gpio218oh_pins
+ &gpio37i_pins
+ &gpio38i_pins
+ &gpio39i_pins
+ &gpio40i_pins
+ &gpio121i_pins
+ &gpio122i_pins
+ &gpio123i_pins
+ &gpio124i_pins
+ &gpio125i_pins
+ &gpio126i_pins
+ &gpio127i_pins
+ &gpio136i_pins
+ &gpio137oh_pins
+ &gpio138i_pins
+ &gpio139i_pins
+ &gpio140i_pins
+ &gpio141i_pins
+ &gpio190oh_pins
+ &gpio191oh_pins
+ &gpio195ol_pins
+ &gpio196ol_pins
+ &gpio199i_pins
+ &gpio202ol_pins
+ >;
+};
+
+&gcr {
+ serial_port_mux: mux-controller {
+ compatible = "mmio-mux";
+ #mux-control-cells = <1>;
+
+ mux-reg-masks = <0x38 0x07>;
+ idle-states = <2>;
+ };
+};
--
2.30.0.478.g8a0d178c01-goog
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Add Fii Kudo system
2021-02-11 8:34 ` [PATCH] ARM: dts: nuvoton: Add Fii Kudo system gmouse
@ 2021-02-11 9:24 ` Joel Stanley
2021-02-11 12:12 ` Anton Kachalov
0 siblings, 1 reply; 9+ messages in thread
From: Joel Stanley @ 2021-02-11 9:24 UTC (permalink / raw)
To: gmouse
Cc: Mohaimen alsmarai, Benjamin Fair, OpenBMC Maillist,
Vivekanand Veeracholan, Lancelot Kao, Mustatfa Shehabi
Hello Anton,
On Thu, 11 Feb 2021 at 08:35, <gmouse@google.com> wrote:
>
> From: Lancelot Kao <lancelot.kao@fii-usa.com>
>
> Add device tree for the Kudo BMC. Kudo is an Ampere (Altra)
> server platform manufactured by Fii and is based on a Nuvoton
> NPCM730 SoC.
I see you got git send email working :)
Where did you want this patch applied? We already have it in the
openbmc tree (both 5.8 and 5.10).
If you would like to see it merged upstream, a few notes:
- remove the OpenBMC-Staging-Count tag. That's for us to use in
openbmc land, but will confuse mainline devs
- When sending someone else's patch, be sure to add your own signed
off by. This applies for the openbmc kernel tree as well as mainline.
- Use scripts/get_maintainer.pl in the kernel tree to work out where
to send the patch. In this case, it should go to linux-arm-kernel. You
can cc me as I've been helping out with Nuvoton pull requests.
Cheers,
Joel
>
> OpenBMC-Staging-Count: 1
> Signed-off-by: Mustatfa Shehabi <Mustafa.Shehabi@fii-na.com>
> Signed-off-by: Mohaimen alsmarai <Mohaimen.alsamarai@fii-na.com>
> Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
> Reviewed-by: Vivekanand Veeracholan <vveerach@google.com>
> Reviewed-by: Benjamin Fair <benjaminfair@google.com>
> Reviewed-by: Joel Stanley <joel@jms.id.au>
> Link: https://lore.kernel.org/r/20201116232127.7066-1-lancelot.kao@fii-usa.com
> Signed-off-by: Joel Stanley <joel@jms.id.au>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Add Fii Kudo system
2021-02-11 9:24 ` Joel Stanley
@ 2021-02-11 12:12 ` Anton Kachalov
2021-02-11 14:14 ` Anton Kachalov
0 siblings, 1 reply; 9+ messages in thread
From: Anton Kachalov @ 2021-02-11 12:12 UTC (permalink / raw)
To: Joel Stanley
Cc: Mohaimen alsmarai, Benjamin Fair, OpenBMC Maillist,
Vivekanand Veeracholan, Lancelot Kao, Mustatfa Shehabi
[-- Attachment #1: Type: text/plain, Size: 1927 bytes --]
Oh, I did tried to send a specific patch. git send-email shown a correct
body message (without actual patch hunks) before sending, but then it sends
wrong data (e.g.last commit instead of provided patch file).
I had to subscribe to ML with primary email. Internal issues were caused by
using an email alias that I use to sign-offs the commits.
On Thu, Feb 11, 2021, 10:24 Joel Stanley <joel@jms.id.au> wrote:
> Hello Anton,
>
> On Thu, 11 Feb 2021 at 08:35, <gmouse@google.com> wrote:
> >
> > From: Lancelot Kao <lancelot.kao@fii-usa.com>
> >
> > Add device tree for the Kudo BMC. Kudo is an Ampere (Altra)
> > server platform manufactured by Fii and is based on a Nuvoton
> > NPCM730 SoC.
>
> I see you got git send email working :)
>
> Where did you want this patch applied? We already have it in the
> openbmc tree (both 5.8 and 5.10).
>
> If you would like to see it merged upstream, a few notes:
>
> - remove the OpenBMC-Staging-Count tag. That's for us to use in
> openbmc land, but will confuse mainline devs
> - When sending someone else's patch, be sure to add your own signed
> off by. This applies for the openbmc kernel tree as well as mainline.
> - Use scripts/get_maintainer.pl in the kernel tree to work out where
> to send the patch. In this case, it should go to linux-arm-kernel. You
> can cc me as I've been helping out with Nuvoton pull requests.
>
> Cheers,
>
> Joel
>
>
> >
> > OpenBMC-Staging-Count: 1
> > Signed-off-by: Mustatfa Shehabi <Mustafa.Shehabi@fii-na.com>
> > Signed-off-by: Mohaimen alsmarai <Mohaimen.alsamarai@fii-na.com>
> > Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
> > Reviewed-by: Vivekanand Veeracholan <vveerach@google.com>
> > Reviewed-by: Benjamin Fair <benjaminfair@google.com>
> > Reviewed-by: Joel Stanley <joel@jms.id.au>
> > Link:
> https://lore.kernel.org/r/20201116232127.7066-1-lancelot.kao@fii-usa.com
> > Signed-off-by: Joel Stanley <joel@jms.id.au>
>
[-- Attachment #2: Type: text/html, Size: 3384 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Add Fii Kudo system
2021-02-11 12:12 ` Anton Kachalov
@ 2021-02-11 14:14 ` Anton Kachalov
0 siblings, 0 replies; 9+ messages in thread
From: Anton Kachalov @ 2021-02-11 14:14 UTC (permalink / raw)
To: Joel Stanley
Cc: Mohaimen alsmarai, Benjamin Fair, OpenBMC Maillist,
Vivekanand Veeracholan, Lancelot Kao, Mustatfa Shehabi
So, actual patch in the previous email with subject "ARM: dts:
nuvoton: Fix flash layout".
Idk why git send-email decided to send two separate emails.
On Thu, 11 Feb 2021 at 13:12, Anton Kachalov <gmouse@google.com> wrote:
>
> Oh, I did tried to send a specific patch. git send-email shown a correct body message (without actual patch hunks) before sending, but then it sends wrong data (e.g.last commit instead of provided patch file).
>
> I had to subscribe to ML with primary email. Internal issues were caused by using an email alias that I use to sign-offs the commits.
>
>
> On Thu, Feb 11, 2021, 10:24 Joel Stanley <joel@jms.id.au> wrote:
>>
>> Hello Anton,
>>
>> On Thu, 11 Feb 2021 at 08:35, <gmouse@google.com> wrote:
>> >
>> > From: Lancelot Kao <lancelot.kao@fii-usa.com>
>> >
>> > Add device tree for the Kudo BMC. Kudo is an Ampere (Altra)
>> > server platform manufactured by Fii and is based on a Nuvoton
>> > NPCM730 SoC.
>>
>> I see you got git send email working :)
>>
>> Where did you want this patch applied? We already have it in the
>> openbmc tree (both 5.8 and 5.10).
>>
>> If you would like to see it merged upstream, a few notes:
>>
>> - remove the OpenBMC-Staging-Count tag. That's for us to use in
>> openbmc land, but will confuse mainline devs
>> - When sending someone else's patch, be sure to add your own signed
>> off by. This applies for the openbmc kernel tree as well as mainline.
>> - Use scripts/get_maintainer.pl in the kernel tree to work out where
>> to send the patch. In this case, it should go to linux-arm-kernel. You
>> can cc me as I've been helping out with Nuvoton pull requests.
>>
>> Cheers,
>>
>> Joel
>>
>>
>> >
>> > OpenBMC-Staging-Count: 1
>> > Signed-off-by: Mustatfa Shehabi <Mustafa.Shehabi@fii-na.com>
>> > Signed-off-by: Mohaimen alsmarai <Mohaimen.alsamarai@fii-na.com>
>> > Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
>> > Reviewed-by: Vivekanand Veeracholan <vveerach@google.com>
>> > Reviewed-by: Benjamin Fair <benjaminfair@google.com>
>> > Reviewed-by: Joel Stanley <joel@jms.id.au>
>> > Link: https://lore.kernel.org/r/20201116232127.7066-1-lancelot.kao@fii-usa.com
>> > Signed-off-by: Joel Stanley <joel@jms.id.au>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout This change satisfy OpenBMC requirements for flash layout.
2021-02-11 8:34 [PATCH] ARM: dts: nuvoton: Fix flash layout This change satisfy OpenBMC requirements for flash layout gmouse
2021-02-11 8:34 ` [PATCH] ARM: dts: nuvoton: Add Fii Kudo system gmouse
@ 2021-02-11 16:15 ` Anton Kachalov
2021-02-17 13:02 ` Anton Kachalov
2021-02-18 5:13 ` Joel Stanley
1 sibling, 2 replies; 9+ messages in thread
From: Anton Kachalov @ 2021-02-11 16:15 UTC (permalink / raw)
To: OpenBMC Maillist, Joel Stanley
Hi, Joel.
This is the correct patch.
On Thu, 11 Feb 2021 at 09:34, <gmouse@google.com> wrote:
>
> From: "Anton D. Kachalov" <gmouse@google.com>
>
> Signed-off-by: Anton D. Kachalov <gmouse@google.com>
> ---
> arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++----------------
> 1 file changed, 8 insertions(+), 20 deletions(-)
>
> diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> index bd1eb6ee380f..741c1fee8552 100644
> --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> @@ -182,8 +182,8 @@ bbuboot2@80000 {
> reg = <0x0080000 0x80000>;
> read-only;
> };
> - envparam@100000 {
> - label = "env-param";
> + ubootenv@100000 {
> + label = "u-boot-env";
> reg = <0x0100000 0x40000>;
> read-only;
> };
> @@ -195,25 +195,13 @@ kernel@200000 {
> label = "kernel";
> reg = <0x0200000 0x400000>;
> };
> - rootfs@600000 {
> - label = "rootfs";
> - reg = <0x0600000 0x700000>;
> + rofs@780000 {
> + label = "rofs";
> + reg = <0x0780000 0x1680000>;
> };
> - spare1@D00000 {
> - label = "spare1";
> - reg = <0x0D00000 0x200000>;
> - };
> - spare2@0F00000 {
> - label = "spare2";
> - reg = <0x0F00000 0x200000>;
> - };
> - spare3@1100000 {
> - label = "spare3";
> - reg = <0x1100000 0x200000>;
> - };
> - spare4@1300000 {
> - label = "spare4";
> - reg = <0x1300000 0x0>;
> + rwfs@1e00000 {
> + label = "rwfs";
> + reg = <0x1e00000 0x200000>;
> };
> };
> };
> --
> 2.30.0.478.g8a0d178c01-goog
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout This change satisfy OpenBMC requirements for flash layout.
2021-02-11 16:15 ` [PATCH] ARM: dts: nuvoton: Fix flash layout This change satisfy OpenBMC requirements for flash layout Anton Kachalov
@ 2021-02-17 13:02 ` Anton Kachalov
2021-02-18 5:13 ` Joel Stanley
1 sibling, 0 replies; 9+ messages in thread
From: Anton Kachalov @ 2021-02-17 13:02 UTC (permalink / raw)
To: OpenBMC Maillist, Joel Stanley
Gently ping.
On Thu, 11 Feb 2021 at 17:15, Anton Kachalov <gmouse@google.com> wrote:
>
> Hi, Joel.
>
> This is the correct patch.
>
> On Thu, 11 Feb 2021 at 09:34, <gmouse@google.com> wrote:
> >
> > From: "Anton D. Kachalov" <gmouse@google.com>
> >
> > Signed-off-by: Anton D. Kachalov <gmouse@google.com>
> > ---
> > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++----------------
> > 1 file changed, 8 insertions(+), 20 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> > index bd1eb6ee380f..741c1fee8552 100644
> > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> > @@ -182,8 +182,8 @@ bbuboot2@80000 {
> > reg = <0x0080000 0x80000>;
> > read-only;
> > };
> > - envparam@100000 {
> > - label = "env-param";
> > + ubootenv@100000 {
> > + label = "u-boot-env";
> > reg = <0x0100000 0x40000>;
> > read-only;
> > };
> > @@ -195,25 +195,13 @@ kernel@200000 {
> > label = "kernel";
> > reg = <0x0200000 0x400000>;
> > };
> > - rootfs@600000 {
> > - label = "rootfs";
> > - reg = <0x0600000 0x700000>;
> > + rofs@780000 {
> > + label = "rofs";
> > + reg = <0x0780000 0x1680000>;
> > };
> > - spare1@D00000 {
> > - label = "spare1";
> > - reg = <0x0D00000 0x200000>;
> > - };
> > - spare2@0F00000 {
> > - label = "spare2";
> > - reg = <0x0F00000 0x200000>;
> > - };
> > - spare3@1100000 {
> > - label = "spare3";
> > - reg = <0x1100000 0x200000>;
> > - };
> > - spare4@1300000 {
> > - label = "spare4";
> > - reg = <0x1300000 0x0>;
> > + rwfs@1e00000 {
> > + label = "rwfs";
> > + reg = <0x1e00000 0x200000>;
> > };
> > };
> > };
> > --
> > 2.30.0.478.g8a0d178c01-goog
> >
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout This change satisfy OpenBMC requirements for flash layout.
2021-02-11 16:15 ` [PATCH] ARM: dts: nuvoton: Fix flash layout This change satisfy OpenBMC requirements for flash layout Anton Kachalov
2021-02-17 13:02 ` Anton Kachalov
@ 2021-02-18 5:13 ` Joel Stanley
2021-02-18 11:35 ` Anton Kachalov
1 sibling, 1 reply; 9+ messages in thread
From: Joel Stanley @ 2021-02-18 5:13 UTC (permalink / raw)
To: Anton Kachalov; +Cc: OpenBMC Maillist
On Thu, 11 Feb 2021 at 16:15, Anton Kachalov <gmouse@google.com> wrote:
>
> Hi, Joel.
>
> This is the correct patch.
Thanks. I didn't get this email; can you resend the patch?
Please send it to the mainline lists, and use get_maintainers.pl so
the nuvoton team can review.
I will apply it to the nuvoton tree for merging next merge window, and
to the openbmc tree.
Cheers,
Joel
>
> On Thu, 11 Feb 2021 at 09:34, <gmouse@google.com> wrote:
> >
> > From: "Anton D. Kachalov" <gmouse@google.com>
> >
> > Signed-off-by: Anton D. Kachalov <gmouse@google.com>
> > ---
> > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++----------------
> > 1 file changed, 8 insertions(+), 20 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> > index bd1eb6ee380f..741c1fee8552 100644
> > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> > @@ -182,8 +182,8 @@ bbuboot2@80000 {
> > reg = <0x0080000 0x80000>;
> > read-only;
> > };
> > - envparam@100000 {
> > - label = "env-param";
> > + ubootenv@100000 {
> > + label = "u-boot-env";
> > reg = <0x0100000 0x40000>;
> > read-only;
> > };
> > @@ -195,25 +195,13 @@ kernel@200000 {
> > label = "kernel";
> > reg = <0x0200000 0x400000>;
> > };
> > - rootfs@600000 {
> > - label = "rootfs";
> > - reg = <0x0600000 0x700000>;
> > + rofs@780000 {
> > + label = "rofs";
> > + reg = <0x0780000 0x1680000>;
> > };
> > - spare1@D00000 {
> > - label = "spare1";
> > - reg = <0x0D00000 0x200000>;
> > - };
> > - spare2@0F00000 {
> > - label = "spare2";
> > - reg = <0x0F00000 0x200000>;
> > - };
> > - spare3@1100000 {
> > - label = "spare3";
> > - reg = <0x1100000 0x200000>;
> > - };
> > - spare4@1300000 {
> > - label = "spare4";
> > - reg = <0x1300000 0x0>;
> > + rwfs@1e00000 {
> > + label = "rwfs";
> > + reg = <0x1e00000 0x200000>;
> > };
> > };
> > };
> > --
> > 2.30.0.478.g8a0d178c01-goog
> >
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: dts: nuvoton: Fix flash layout This change satisfy OpenBMC requirements for flash layout.
2021-02-18 5:13 ` Joel Stanley
@ 2021-02-18 11:35 ` Anton Kachalov
0 siblings, 0 replies; 9+ messages in thread
From: Anton Kachalov @ 2021-02-18 11:35 UTC (permalink / raw)
To: Joel Stanley; +Cc: OpenBMC Maillist
Hi, Joel.
Ok, I will resend. What do you mean with sending to mainline lists?
In MAINTAINERS the arm/nuvoton mentions this openbmc@ mailing list.
On Thu, 18 Feb 2021 at 06:13, Joel Stanley <joel@jms.id.au> wrote:
>
> On Thu, 11 Feb 2021 at 16:15, Anton Kachalov <gmouse@google.com> wrote:
> >
> > Hi, Joel.
> >
> > This is the correct patch.
>
> Thanks. I didn't get this email; can you resend the patch?
>
> Please send it to the mainline lists, and use get_maintainers.pl so
> the nuvoton team can review.
>
> I will apply it to the nuvoton tree for merging next merge window, and
> to the openbmc tree.
>
> Cheers,
>
> Joel
>
> >
> > On Thu, 11 Feb 2021 at 09:34, <gmouse@google.com> wrote:
> > >
> > > From: "Anton D. Kachalov" <gmouse@google.com>
> > >
> > > Signed-off-by: Anton D. Kachalov <gmouse@google.com>
> > > ---
> > > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 28 +++++++----------------
> > > 1 file changed, 8 insertions(+), 20 deletions(-)
> > >
> > > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> > > index bd1eb6ee380f..741c1fee8552 100644
> > > --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> > > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> > > @@ -182,8 +182,8 @@ bbuboot2@80000 {
> > > reg = <0x0080000 0x80000>;
> > > read-only;
> > > };
> > > - envparam@100000 {
> > > - label = "env-param";
> > > + ubootenv@100000 {
> > > + label = "u-boot-env";
> > > reg = <0x0100000 0x40000>;
> > > read-only;
> > > };
> > > @@ -195,25 +195,13 @@ kernel@200000 {
> > > label = "kernel";
> > > reg = <0x0200000 0x400000>;
> > > };
> > > - rootfs@600000 {
> > > - label = "rootfs";
> > > - reg = <0x0600000 0x700000>;
> > > + rofs@780000 {
> > > + label = "rofs";
> > > + reg = <0x0780000 0x1680000>;
> > > };
> > > - spare1@D00000 {
> > > - label = "spare1";
> > > - reg = <0x0D00000 0x200000>;
> > > - };
> > > - spare2@0F00000 {
> > > - label = "spare2";
> > > - reg = <0x0F00000 0x200000>;
> > > - };
> > > - spare3@1100000 {
> > > - label = "spare3";
> > > - reg = <0x1100000 0x200000>;
> > > - };
> > > - spare4@1300000 {
> > > - label = "spare4";
> > > - reg = <0x1300000 0x0>;
> > > + rwfs@1e00000 {
> > > + label = "rwfs";
> > > + reg = <0x1e00000 0x200000>;
> > > };
> > > };
> > > };
> > > --
> > > 2.30.0.478.g8a0d178c01-goog
> > >
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2021-02-18 11:36 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-11 8:34 [PATCH] ARM: dts: nuvoton: Fix flash layout This change satisfy OpenBMC requirements for flash layout gmouse
2021-02-11 8:34 ` [PATCH] ARM: dts: nuvoton: Add Fii Kudo system gmouse
2021-02-11 9:24 ` Joel Stanley
2021-02-11 12:12 ` Anton Kachalov
2021-02-11 14:14 ` Anton Kachalov
2021-02-11 16:15 ` [PATCH] ARM: dts: nuvoton: Fix flash layout This change satisfy OpenBMC requirements for flash layout Anton Kachalov
2021-02-17 13:02 ` Anton Kachalov
2021-02-18 5:13 ` Joel Stanley
2021-02-18 11:35 ` Anton Kachalov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).