From: "Lin.TommySC 林世欽 TAO" <Lin.TommySC@inventec.com>
To: Joel Stanley <joel@jms.id.au>
Cc: "Ye.Vic 葉宇清 TAO" <ye.vic@inventec.com>,
"openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org>,
"Mohammed.Habeeb ISV" <mohammed.habeeb@inventec.com>
Subject: RE: [PATCH v2] ARM: dts: aspeed: Adding Inventec Transformers BMC
Date: Tue, 19 Oct 2021 02:06:42 +0000 [thread overview]
Message-ID: <dc78dc3324284fbaa45da37fb1ac4798@inventec.com> (raw)
In-Reply-To: <CACPK8XdzUf9nK_PNQcEJCs+9fMv-J=ZP4hetQ2ofbB=5GGALXw@mail.gmail.com>
Hi Joel,
Could you give some hint on how to upgrade to v5.15-rc1? I don't see this tag in upstream github https://github.com/openbmc/linux.
BR
Tommy
________________________________________
寄件者: Joel Stanley <joel@jms.id.au>
寄件日期: 2021年10月19日 上午 07:48
收件者: Lin.TommySC 林世欽 TAO
副本: openbmc@lists.ozlabs.org; Ye.Vic 葉宇清 TAO; Mohammed.Habeeb ISV
主旨: Re: [PATCH v2] ARM: dts: aspeed: Adding Inventec Transformers BMC
On Mon, 18 Oct 2021 at 23:43, Joel Stanley <joel@jms.id.au> wrote:
>
> On Mon, 18 Oct 2021 at 22:51, Lin.TommySC 林世欽 TAO
> <Lin.TommySC@inventec.com> wrote:
> >
> > Initial introduction of Inventec Transformers x86 family equipped with AST2600 BMC SoC.
> >
> > Signed-off-by: Tommy Lin <Lin.TommySC@inventec.com>
>
> Reviewed-by: Joel Stanley <joel@jms.id.au>
>
> Thanks! I've applied this to the aspeed tree (but I've already sent my
> pull request for v5.16) and to the openbmc tree.
I spoke too soon! The patch introduces a lot of warnings that I will
get you to fix before I apply. Please apply your patch to v5.15-rc1
and build it to ensure you have seen all of the warnings.
> > + pwm_tacho {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + fan@0 {
> > + reg = <0x00>;
> > + aspeed,target_pwm = <25000>;
> > + cooling-levels = <125 151 177 203 229 255>;
> > + aspeed,fan-tach-ch = <0x00>;
> > + aspeed,min_rpm = <750000>;
DTC arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dtb
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:70.24-37:
Warning (reg_format): /pwm_tacho/fan@0:reg: property has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:78.24-37:
Warning (reg_format): /pwm_tacho/fan@1:reg: property has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:86.24-37:
Warning (reg_format): /pwm_tacho/fan@2:reg: property has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:94.24-37:
Warning (reg_format): /pwm_tacho/fan@3:reg: property has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:102.24-37:
Warning (reg_format): /pwm_tacho/fan@4:reg: property has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:110.24-37:
Warning (reg_format): /pwm_tacho/fan@5:reg: property has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:118.24-37:
Warning (reg_format): /pwm_tacho/fan@6:reg: property has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:126.24-37:
Warning (reg_format): /pwm_tacho/fan@7:reg: property has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:134.24-37:
Warning (reg_format): /pwm_tacho/fan@8:reg: property has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:139.24-37:
Warning (reg_format): /pwm_tacho/fan@9:reg: property has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:144.24-37:
Warning (reg_format): /pwm_tacho/fan@10:reg: property has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:149.24-37:
Warning (reg_format): /pwm_tacho/fan@11:reg: property has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:154.24-37:
Warning (reg_format): /pwm_tacho/fan@12:reg: property has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:159.24-37:
Warning (reg_format): /pwm_tacho/fan@13:reg: property has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:164.24-37:
Warning (reg_format): /pwm_tacho/fan@14:reg: property has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:169.24-37:
Warning (reg_format): /pwm_tacho/fan@15:reg: property has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dtb: Warning
(pci_device_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dtb: Warning
(pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dtb: Warning
(i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dtb: Warning
(spi_bus_reg): Failed prerequisite 'reg_format'
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:69.22-75.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@0: Relying on
default #address-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:69.22-75.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@0: Relying on
default #size-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:77.22-83.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@1: Relying on
default #address-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:77.22-83.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@1: Relying on
default #size-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:85.22-91.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@2: Relying on
default #address-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:85.22-91.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@2: Relying on
default #size-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:93.22-99.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@3: Relying on
default #address-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:93.22-99.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@3: Relying on
default #size-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:101.22-107.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@4: Relying on
default #address-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:101.22-107.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@4: Relying on
default #size-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:109.22-115.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@5: Relying on
default #address-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:109.22-115.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@5: Relying on
default #size-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:117.22-123.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@6: Relying on
default #address-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:117.22-123.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@6: Relying on
default #size-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:125.22-131.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@7: Relying on
default #address-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:125.22-131.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@7: Relying on
default #size-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:133.22-136.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@8: Relying on
default #address-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:133.22-136.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@8: Relying on
default #size-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:138.22-141.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@9: Relying on
default #address-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:138.22-141.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@9: Relying on
default #size-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:143.23-146.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@10: Relying on
default #address-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:143.23-146.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@10: Relying on
default #size-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:148.23-151.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@11: Relying on
default #address-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:148.23-151.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@11: Relying on
default #size-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:153.23-156.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@12: Relying on
default #address-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:153.23-156.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@12: Relying on
default #size-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:158.23-161.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@13: Relying on
default #address-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:158.23-161.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@13: Relying on
default #size-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:163.23-166.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@14: Relying on
default #address-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:163.23-166.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@14: Relying on
default #size-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:168.23-171.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@15: Relying on
default #address-cells value
../arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts:168.23-171.18:
Warning (avoid_default_addr_size): /pwm_tacho/fan@15: Relying on
default #size-cells value
> > + };
> > +
> > + fan@1 {
> > + reg = <0x01>;
> > + aspeed,target_pwm = <25000>;
> > + cooling-levels = <125 151 177 203 229 255>;
> > + aspeed,fan-tach-ch = <0x01>;
> > + aspeed,min_rpm = <750000>;
> > + };
> > +
> > + fan@2 {
> > + reg = <0x02>;
> > + aspeed,target_pwm = <25000>;
> > + cooling-levels = <125 151 177 203 229 255>;
> > + aspeed,fan-tach-ch = <0x02>;
> > + aspeed,min_rpm = <750000>;
> > + };
> > +
> > + fan@3 {
> > + reg = <0x03>;
> > + aspeed,target_pwm = <25000>;
> > + cooling-levels = <125 151 177 203 229 255>;
> > + aspeed,fan-tach-ch = <0x03>;
> > + aspeed,min_rpm = <750000>;
> > + };
> > +
> > + fan@4 {
> > + reg = <0x04>;
> > + aspeed,target_pwm = <25000>;
> > + cooling-levels = <125 151 177 203 229 255>;
> > + aspeed,fan-tach-ch = <0x04>;
> > + aspeed,min_rpm = <750000>;
> > + };
> > +
> > + fan@5 {
> > + reg = <0x05>;
> > + aspeed,target_pwm = <25000>;
> > + cooling-levels = <125 151 177 203 229 255>;
> > + aspeed,fan-tach-ch = <0x05>;
> > + aspeed,min_rpm = <750000>;
> > + };
> > +
> > + fan@6 {
> > + reg = <0x06>;
> > + aspeed,target_pwm = <25000>;
> > + cooling-levels = <125 151 177 203 229 255>;
> > + aspeed,fan-tach-ch = <0x06>;
> > + aspeed,min_rpm = <750000>;
> > + };
> > +
> > + fan@7 {
> > + reg = <0x07>;
> > + aspeed,target_pwm = <25000>;
> > + cooling-levels = <125 151 177 203 229 255>;
> > + aspeed,fan-tach-ch = <0x07>;
> > + aspeed,min_rpm = <750000>;
> > + };
> > +
> > + fan@8 {
> > + reg = <0x08>;
> > + aspeed,fan-tach-ch = <0x08>;
> > + };
> > +
> > + fan@9 {
> > + reg = <0x09>;
> > + aspeed,fan-tach-ch = <0x09>;
> > + };
> > +
> > + fan@10 {
> > + reg = <0x0a>;
> > + aspeed,fan-tach-ch = <0x0a>;
> > + };
> > +
> > + fan@11 {
> > + reg = <0x0b>;
> > + aspeed,fan-tach-ch = <0x0b>;
> > + };
> > +
> > + fan@12 {
> > + reg = <0x0c>;
> > + aspeed,fan-tach-ch = <0x0c>;
> > + };
> > +
> > + fan@13 {
> > + reg = <0x0d>;
> > + aspeed,fan-tach-ch = <0x0d>;
> > + };
> > +
> > + fan@14 {
> > + reg = <0x0e>;
> > + aspeed,fan-tach-ch = <0x0e>;
> > + };
> > +
> > + fan@15 {
> > + reg = <0x0f>;
> > + aspeed,fan-tach-ch = <0x0f>;
> > + };
> > + };
> > +};
> > +
> > +&mdio0 {
> > + status = "okay";
> > +
> > + ethphy0: ethernet-phy@0 {
> > + compatible = "ethernet-phy-ieee802.3-c22";
> > + reg = <1>;
> > + };
> > +};
> > +
> > +&mac3 {
> > + status = "okay";
> > + phy-mode = "rgmii";
> > + phy-handle = <ðphy0>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_rgmii4_default>;
> > +};
> > +
> > +&fmc {
> > + status = "okay";
> > +
> > + flash@0 {
> > + status = "okay";
> > + m25p,fast-read;
> > + label = "bmc";
> > + spi-max-frequency = <33000000>;
> > + spi-tx-bus-width = <2>;
> > + spi-rx-bus-width = <2>;
> > +#include "openbmc-flash-layout.dtsi"
> > + };
> > +
> > + flash@1 {
> > + status = "okay";
> > + m25p,fast-read;
> > + label = "bmc2";
> > + spi-max-frequency = <33000000>;
> > + spi-tx-bus-width = <2>;
> > + spi-rx-bus-width = <2>;
> > + };
> > +};
> > +
> > +&spi1 {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_spi1_default>;
> > +
> > + flash@0 {
> > + status = "okay";
> > + m25p,fast-read;
> > + label = "bios";
> > + spi-max-frequency = <33000000>;
> > + spi-tx-bus-width = <1>;
> > + spi-rx-bus-width = <1>;
> > + };
> > +};
> > +
> > +&wdt1 {
> > + status = "okay";
> > +};
> > +
> > +&uart1 {
> > + status = "okay";
> > +};
> > +
> > +&uart5 {
> > + status = "okay";
> > +};
> > +
> > +&i2c0 {
> > + status = "okay";
> > +
> > + //Set bmc' slave address;
> > + bmc_slave@10 {
> > + compatible = "ipmb-dev";
> > + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> > + i2c-protocol;
> > + };
> > +};
> > +
> > +&i2c2 {
> > + status = "okay";
> > +};
> > +
> > +&i2c3 {
> > + // FRU AT24C512C-SSHM-T
> > + status = "okay";
> > + eeprom@50 {
> > + compatible = "atmel,24c512";
> > + reg = <0x50>;
> > + pagesize = <128>;
> > + };
> > +};
> > +
> > +&i2c5 {
> > + status = "okay";
> > +};
> > +
> > +&i2c6 {
> > + status = "okay";
> > +
> > + tmp75@49 {
> > + compatible = "ti,tmp75";
> > + reg = <0x49>;
> > + };
> > +
> > + tmp75@4f {
> > + compatible = "ti,tmp75";
> > + reg = <0x4f>;
> > + };
> > +
> > + tmp468@48 {
> > + compatible = "ti,tmp468";
> > + reg = <0x48>;
> > + };
> > +};
> > +
> > +&i2c7 {
> > + status = "okay";
> > + adm1278@40 {
> > + compatible = "adi,adm1278";
> > + reg = <0x40>;
> > + };
> > +};
> > +
> > +
> > +&i2c8 {
> > + // FRU AT24C512C-SSHM-T
> > + status = "okay";
> > +
> > + eeprom@51 {
> > + compatible = "atmel,24c512";
> > + reg = <0x51>;
> > + pagesize = <128>;
> > + };
> > +
> > + eeprom@53 {
> > + compatible = "atmel,24c512";
> > + reg = <0x53>;
> > + pagesize = <128>;
> > + };
> > +};
> > +
> > +&i2c9 {
> > + // M.2
> > + status = "okay";
> > +};
> > +
> > +&i2c10 {
> > + // I2C EXPANDER
> > + status = "okay";
> > +
> > + i2c-switch@71 {
> > + compatible = "nxp,pca9544";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0x71>;
> > + };
> > +
> > + i2c-switch@73 {
> > + compatible = "nxp,pca9544";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0x73>;
> > + };
> > +};
> > +
> > +&i2c11 {
> > + // I2C EXPANDER
> > + status = "okay";
> > +
> > + i2c-switch@70 {
> > + compatible = "nxp,pca9544";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0x70>;
> > +
> > + pcie_eeprom_riser1: i2c@0 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0>;
> > +
> > + eeprom@55 {
> > + compatible = "atmel,24c512";
> > + reg = <0x55>;
> > + pagesize = <128>;
> > + };
> > + };
> > +
> > + pcie_eeprom_riser2: i2c@1 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <1>;
> > +
> > + eeprom@55 {
> > + compatible = "atmel,24c512";
> > + reg = <0x55>;
> > + pagesize = <128>;
> > + };
> > + };
> > +
> > + pcie_eeprom_riser3: i2c@2 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <2>;
> > +
> > + eeprom@55 {
> > + compatible = "atmel,24c512";
> > + reg = <0x55>;
> > + pagesize = <128>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&i2c12 {
> > + status = "okay";
> > +
> > + psu0:psu0@58 {
> > + compatible = "pmbus";
> > + reg = <0x58>;
> > + };
> > +};
> > +
> > +&gpio0 {
> > + status = "okay";
> > + gpio-line-names =
> > + /*A0-A7*/ "","","","","","","","",
> > + /*B0-B7*/ "presence-ps0","power-chassis-good","","","","","presence-ps1","",
> > + /*C0-C7*/ "","","","","","","","",
> > + /*D0-D7*/ "","","","","","","","",
> > + /*E0-E7*/ "","","","","","","","",
> > + /*F0-F7*/ "","","","","power-chassis-control","","","",
> > + /*G0-G7*/ "","","jtag-mux","","","","","",
> > + /*H0-H7*/ "","","","","reset-button","power-button","","",
> > + /*I0-I7*/ "","","","","","","","",
> > + /*J0-J7*/ "","","","","","","","",
> > + /*K0-K7*/ "","","","","","","","",
> > + /*L0-L7*/ "","","","","","","","",
> > + /*M0-M7*/ "","","","","","","","",
> > + /*N0-N7*/ "","","","","","","","",
> > + /*O0-O7*/ "","","","","","","","",
> > + /*P0-P7*/ "","","","tck-mux","","","","",
> > + /*Q0-Q7*/ "","","","","","","","",
> > + /*R0-R7*/ "","","","","","","","",
> > + /*S0-S7*/ "","","","","","","","",
> > + /*T0-T7*/ "","","","","","","","",
> > + /*U0-U7*/ "","nmi-button","","","","","","",
> > + /*V0-V7*/ "","","","","power-config-full-load","","","",
> > + /*W0-W7*/ "","","","","","","","",
> > + /*X0-X7*/ "","","","","","","","",
> > + /*Y0-Y7*/ "","","","","","","","",
> > + /*Z0-Z7*/ "","","","","","","","",
> > + /*AA0-AA7*/ "","","","","","","","",
> > + /*AB0-AB7*/ "","","","","","","","",
> > + /*AC0-AC7*/ "","","","","","","","";
> > +};
> > +
> > +&lpc_snoop {
> > + status = "okay";
> > + snoop-ports = <0x80>;
> > +};
> > +
> > +&emmc_controller {
> > + status = "okay";
> > +};
> > +
> > +&emmc {
> > + status = "okay";
> > + non-removable;
> > + max-frequency = <52000000>;
> > + bus-width = <8>;
> > +};
> > +
> > +&vhub {
> > + status = "okay";
> > + aspeed,vhub-downstream-ports = <7>;
> > + aspeed,vhub-generic-endpoints = <21>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_usb2ad_default>;
> > +};
> > +
> > +&rtc {
> > + status = "okay";
> > +};
> > --
> > 2.33.0
> >
next prev parent reply other threads:[~2021-10-19 2:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <3a7fed78df06416da20ec72f14111c97@inventec.com>
2021-10-14 2:31 ` [PATCH v2] ARM: dts: aspeed: Adding Inventec Transformers BMC Lin.TommySC 林世欽 TAO
2021-10-18 23:43 ` Joel Stanley
2021-10-18 23:48 ` Joel Stanley
2021-10-19 2:06 ` Lin.TommySC 林世欽 TAO [this message]
2021-10-19 2:10 ` Joel Stanley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dc78dc3324284fbaa45da37fb1ac4798@inventec.com \
--to=lin.tommysc@inventec.com \
--cc=joel@jms.id.au \
--cc=mohammed.habeeb@inventec.com \
--cc=openbmc@lists.ozlabs.org \
--cc=ye.vic@inventec.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).