Phone-Devel Archive on
 help / color / Atom feed
* v3: arm64: dts: sm8150: start populating qups
@ 2021-04-08 16:20 Caleb Connolly
  0 siblings, 0 replies; only message in thread
From: Caleb Connolly @ 2021-04-08 16:20 UTC (permalink / raw)
  To: caleb; +Cc: ~postmarketos/upstreaming, phone-devel, linux-arm-msm

The QUPs are rather sparse, lets add the zero-th and second qup nodes,
the iommus properties for all of them and the i2c nodes.

With this it's now possible to bringup the touchscreen on my
device, and without crashing!

Derived from OnePlus 7 Pro downstream kernel sources.


Changes since v1:
 * Pick up Reviewed-By's from Vinod and Bhupesh
 * Squash second patch into first
 * Add iommus property to dt-binding docs for geni
 * Fix i2c19 being mistakenly enabled by default

Changes since v2:
 * Fix iommus definition to just declare the property and maxItems (Thanks Bjorn).

Caleb Connolly (3):
      arm64: dts: qcom: sm8150: add other QUP nodes and iommus
      arm64: dts: qcom: sm8150: add i2c nodes
      dt-bindings: qcom: geni-se: document iommus

 arch/arm64/boot/dts/qcom/sm8150.dtsi | 549 +++++++++++++++++++++++++++++++++++
 1 file changed, 549 insertions(+)x

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-08 16:20 v3: arm64: dts: sm8150: start populating qups Caleb Connolly

Phone-Devel Archive on

Archives are clonable:
	git clone --mirror phone-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 phone-devel phone-devel/ \
	public-inbox-index phone-devel

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone