Phone-Devel Archive on lore.kernel.org.
 help / color / Atom feed
* [PATCH v5 1/2] dt-bindings: input/touchscreen: add bindings for msg2638
@ 2021-02-16 16:36 Vincent Knecht
  2021-02-16 16:36 ` [PATCH v5 2/2] Input: add MStar MSG2638 touchscreen driver Vincent Knecht
  2021-03-02  8:50 ` [PATCH v5 1/2] dt-bindings: input/touchscreen: add bindings for msg2638 Linus Walleij
  0 siblings, 2 replies; 4+ messages in thread
From: Vincent Knecht @ 2021-02-16 16:36 UTC (permalink / raw)
  To: phone-devel
  Cc: ~postmarketos/upstreaming, Vincent Knecht, Dmitry Torokhov,
	Rob Herring, Henrik Rydberg, Linus Walleij, Michael Srba,
	linux-input, devicetree, linux-kernel

This adds dts bindings for the mstar msg2638 touchscreen.

Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
---
Changed in v5: nothing
Changed in v4:
- don't use wildcards in compatible strings (Rob H)
- rename from msg26xx to msg2638
- rename example pinctrl-0 to &ts_int_reset_default for consistency
Changed in v3:
- added `touchscreen-size-x: true` and `touchscreen-size-y: true` properties
Changed in v2:
- changed M-Star to MStar in title line
- changed reset gpio to active-low in example section
---
 .../input/touchscreen/mstar,msg2638.yaml      | 69 +++++++++++++++++++
 1 file changed, 69 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml

diff --git a/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml
new file mode 100644
index 000000000000..12f44d9e4d41
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/mstar,msg2638.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar msg2638 touchscreen controller Bindings
+
+maintainers:
+  - Vincent Knecht <vincent.knecht@mailoo.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: mstar,msg2638
+
+  reg:
+    const: 0x26
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vdd-supply:
+    description: Power supply regulator for the chip
+
+  vddio-supply:
+    description: Power supply regulator for the I2C bus
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@26 {
+        compatible = "mstar,msg2638";
+        reg = <0x26>;
+        interrupt-parent = <&msmgpio>;
+        interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+        reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&ts_int_reset_default>;
+        vdd-supply = <&pm8916_l17>;
+        vddio-supply = <&pm8916_l5>;
+        touchscreen-size-x = <720>;
+        touchscreen-size-y = <1280>;
+      };
+    };
+
+...
-- 
2.29.2




^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH v5 2/2] Input: add MStar MSG2638 touchscreen driver
  2021-02-16 16:36 [PATCH v5 1/2] dt-bindings: input/touchscreen: add bindings for msg2638 Vincent Knecht
@ 2021-02-16 16:36 ` Vincent Knecht
  2021-03-02  9:00   ` Linus Walleij
  2021-03-02  8:50 ` [PATCH v5 1/2] dt-bindings: input/touchscreen: add bindings for msg2638 Linus Walleij
  1 sibling, 1 reply; 4+ messages in thread
From: Vincent Knecht @ 2021-02-16 16:36 UTC (permalink / raw)
  To: phone-devel
  Cc: ~postmarketos/upstreaming, Vincent Knecht, Dmitry Torokhov,
	Rob Herring, Henrik Rydberg, Michael Srba, Linus Walleij,
	linux-input, devicetree, linux-kernel

Add support for the msg2638 touchscreen IC from MStar.
This driver reuses zinitix.c structure, while the checksum and irq handler
functions are based on out-of-tree driver for Alcatel Idol 3 (4.7").

Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
---
Changed in v5:
- use gpiod_set_value_cansleep() (Stephan G)
- use msleep/usleep_range() rathen than mdelay() (Stephan G)
Changed in v4:
- rename from msg26xx to msg2638, following compatible string change
- rename mstar_* functions to msg2638_* for consistency
- add RESET_DELAY define and use it in msg2638_power_on()
- change a few dev_err() calls to be on one line only
- add missing \n in a few dev_err() strings
Changed in v3:
- no change
Changed in v2:
- don't use bitfields in packet struct, to prevent endian-ness related problems (Dmitry)
- fix reset gpiod calls order in mstar_power_on() (Dmitry)
---
 drivers/input/touchscreen/Kconfig   |  12 +
 drivers/input/touchscreen/Makefile  |   1 +
 drivers/input/touchscreen/msg2638.c | 363 ++++++++++++++++++++++++++++
 3 files changed, 376 insertions(+)
 create mode 100644 drivers/input/touchscreen/msg2638.c

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index f012fe746df0..fefbe1c1bb10 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -1334,4 +1334,16 @@ config TOUCHSCREEN_ZINITIX
 	  To compile this driver as a module, choose M here: the
 	  module will be called zinitix.
 
+config TOUCHSCREEN_MSG2638
+	tristate "MStar msg2638 touchscreen support"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  Say Y here if you have an I2C touchscreen using MStar msg2638.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called msg2638.
+
 endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 6233541e9173..83e516cb3d33 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -112,3 +112,4 @@ obj-$(CONFIG_TOUCHSCREEN_ROHM_BU21023)	+= rohm_bu21023.o
 obj-$(CONFIG_TOUCHSCREEN_RASPBERRYPI_FW)	+= raspberrypi-ts.o
 obj-$(CONFIG_TOUCHSCREEN_IQS5XX)	+= iqs5xx.o
 obj-$(CONFIG_TOUCHSCREEN_ZINITIX)	+= zinitix.o
+obj-$(CONFIG_TOUCHSCREEN_MSG2638)	+= msg2638.o
diff --git a/drivers/input/touchscreen/msg2638.c b/drivers/input/touchscreen/msg2638.c
new file mode 100644
index 000000000000..330d0674873c
--- /dev/null
+++ b/drivers/input/touchscreen/msg2638.c
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for MStar msg2638 touchscreens
+ *
+ * Copyright (c) 2021 Vincent Knecht <vincent.knecht@mailoo.org>
+ *
+ * Checksum and IRQ handler based on mstar_drv_common.c and mstar_drv_mutual_fw_control.c
+ * Copyright (c) 2006-2012 MStar Semiconductor, Inc.
+ *
+ * Driver structure based on zinitix.c by Michael Srba <Michael.Srba@seznam.cz>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#define MODE_DATA_RAW			0x5A
+
+#define TPD_WIDTH			2048
+#define TPD_HEIGHT			2048
+
+#define MAX_SUPPORTED_FINGER_NUM	5
+
+#define CHIP_ON_DELAY			15 // ms
+#define FIRMWARE_ON_DELAY		50 // ms
+#define RESET_DELAY_MIN			10000 // µs
+#define RESET_DELAY_MAX			11000 // µs
+
+struct point_coord {
+	u16	x;
+	u16	y;
+};
+
+struct packet {
+	u8	xy_hi; /* higher bits of x and y coordinates */
+	u8	x_low;
+	u8	y_low;
+	u8	pressure;
+};
+
+struct touch_event {
+	u8	mode;
+	struct	packet pkt[MAX_SUPPORTED_FINGER_NUM];
+	u8	proximity;
+	u8	checksum;
+};
+
+struct msg2638_ts_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	struct touchscreen_properties prop;
+	struct regulator_bulk_data supplies[2];
+	struct gpio_desc *reset_gpiod;
+};
+
+static int msg2638_init_regulators(struct msg2638_ts_data *msg2638)
+{
+	struct i2c_client *client = msg2638->client;
+	int error;
+
+	msg2638->supplies[0].supply = "vdd";
+	msg2638->supplies[1].supply = "vddio";
+	error = devm_regulator_bulk_get(&client->dev,
+					ARRAY_SIZE(msg2638->supplies),
+					msg2638->supplies);
+	if (error < 0) {
+		dev_err(&client->dev, "Failed to get regulators: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static void msg2638_power_on(struct msg2638_ts_data *msg2638)
+{
+	gpiod_set_value_cansleep(msg2638->reset_gpiod, 1);
+	usleep_range(RESET_DELAY_MIN, RESET_DELAY_MAX);
+	gpiod_set_value_cansleep(msg2638->reset_gpiod, 0);
+	msleep(FIRMWARE_ON_DELAY);
+
+	enable_irq(msg2638->client->irq);
+}
+
+static void msg2638_report_finger(struct msg2638_ts_data *msg2638, int slot,
+				const struct point_coord *pc)
+{
+	input_mt_slot(msg2638->input_dev, slot);
+	input_mt_report_slot_state(msg2638->input_dev, MT_TOOL_FINGER, true);
+	touchscreen_report_pos(msg2638->input_dev, &msg2638->prop, pc->x, pc->y, true);
+	input_report_abs(msg2638->input_dev, ABS_MT_TOUCH_MAJOR, 1);
+}
+
+static u8 msg2638_checksum(u8 *data, u32 length)
+{
+	s32 sum = 0;
+	u32 i;
+
+	for (i = 0; i < length; i++)
+		sum += data[i];
+
+	return (u8)((-sum) & 0xFF);
+}
+
+static irqreturn_t msg2638_ts_irq_handler(int irq, void *msg2638_handler)
+{
+	struct msg2638_ts_data *msg2638 = msg2638_handler;
+	struct i2c_client *client = msg2638->client;
+	struct touch_event touch_event;
+	struct point_coord coord;
+	struct i2c_msg msg[1];
+	struct packet *p;
+	u32 len;
+	int ret;
+	int i;
+
+	len = sizeof(struct touch_event);
+	memset(&touch_event, 0, len);
+
+	msg[0].addr = client->addr;
+	msg[0].flags = I2C_M_RD;
+	msg[0].len = len;
+	msg[0].buf = (u8 *)&touch_event;
+
+	ret = i2c_transfer(client->adapter, msg, 1);
+	if (ret != 1) {
+		dev_err(&client->dev, "Failed I2C transfer in irq handler!\n");
+		goto out;
+	}
+
+	if (touch_event.mode != MODE_DATA_RAW)
+		goto out;
+
+	if (msg2638_checksum((u8 *)&touch_event, len - 1) != touch_event.checksum) {
+		dev_err(&client->dev, "Failed checksum!\n");
+		goto out;
+	}
+
+	for (i = 0; i < MAX_SUPPORTED_FINGER_NUM; i++) {
+		p = &touch_event.pkt[i];
+		/* Ignore non-pressed finger data */
+		if (p->xy_hi == 0xFF && p->x_low == 0xFF && p->y_low == 0xFF)
+			continue;
+
+		coord.x = (((p->xy_hi & 0xF0) << 4) | p->x_low) * msg2638->prop.max_x / TPD_WIDTH;
+		coord.y = (((p->xy_hi & 0x0F) << 8) | p->y_low) * msg2638->prop.max_y / TPD_HEIGHT;
+		msg2638_report_finger(msg2638, i, &coord);
+	}
+
+	input_mt_sync_frame(msg2638->input_dev);
+	input_sync(msg2638->input_dev);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int msg2638_start(struct msg2638_ts_data *msg2638)
+{
+	int error;
+
+	error = regulator_bulk_enable(ARRAY_SIZE(msg2638->supplies),
+				      msg2638->supplies);
+	if (error) {
+		dev_err(&msg2638->client->dev, "Failed to enable regulators: %d\n", error);
+		return error;
+	}
+
+	msleep(CHIP_ON_DELAY);
+
+	msg2638_power_on(msg2638);
+
+	return 0;
+}
+
+static int msg2638_stop(struct msg2638_ts_data *msg2638)
+{
+	int error;
+
+	disable_irq(msg2638->client->irq);
+
+	error = regulator_bulk_disable(ARRAY_SIZE(msg2638->supplies),
+				       msg2638->supplies);
+	if (error) {
+		dev_err(&msg2638->client->dev, "Failed to disable regulators: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int msg2638_input_open(struct input_dev *dev)
+{
+	struct msg2638_ts_data *msg2638 = input_get_drvdata(dev);
+
+	return msg2638_start(msg2638);
+}
+
+static void msg2638_input_close(struct input_dev *dev)
+{
+	struct msg2638_ts_data *msg2638 = input_get_drvdata(dev);
+
+	msg2638_stop(msg2638);
+}
+
+static int msg2638_init_input_dev(struct msg2638_ts_data *msg2638)
+{
+	struct input_dev *input_dev;
+	int error;
+
+	input_dev = devm_input_allocate_device(&msg2638->client->dev);
+	if (!input_dev) {
+		dev_err(&msg2638->client->dev, "Failed to allocate input device.\n");
+		return -ENOMEM;
+	}
+
+	input_set_drvdata(input_dev, msg2638);
+	msg2638->input_dev = input_dev;
+
+	input_dev->name = "MStar TouchScreen";
+	input_dev->phys = "input/ts";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->open = msg2638_input_open;
+	input_dev->close = msg2638_input_close;
+
+	input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X);
+	input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y);
+	input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, 15, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+
+	touchscreen_parse_properties(input_dev, true, &msg2638->prop);
+	if (!msg2638->prop.max_x || !msg2638->prop.max_y) {
+		dev_err(&msg2638->client->dev,
+			"touchscreen-size-x and/or touchscreen-size-y not set in dts\n");
+		return -EINVAL;
+	}
+
+	error = input_mt_init_slots(input_dev, MAX_SUPPORTED_FINGER_NUM,
+				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+	if (error) {
+		dev_err(&msg2638->client->dev, "Failed to initialize MT slots: %d\n", error);
+		return error;
+	}
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&msg2638->client->dev, "Failed to register input device: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int msg2638_ts_probe(struct i2c_client *client)
+{
+	struct msg2638_ts_data *msg2638;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "Failed to assert adapter's support for plain I2C.\n");
+		return -ENXIO;
+	}
+
+	msg2638 = devm_kzalloc(&client->dev, sizeof(*msg2638), GFP_KERNEL);
+	if (!msg2638)
+		return -ENOMEM;
+
+	msg2638->client = client;
+	i2c_set_clientdata(client, msg2638);
+
+	error = msg2638_init_regulators(msg2638);
+	if (error) {
+		dev_err(&client->dev, "Failed to initialize regulators: %d\n", error);
+		return error;
+	}
+
+	msg2638->reset_gpiod = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(msg2638->reset_gpiod)) {
+		error = PTR_ERR(msg2638->reset_gpiod);
+		dev_err(&client->dev, "Failed to request reset GPIO: %d\n", error);
+		return error;
+	}
+
+	error = msg2638_init_input_dev(msg2638);
+	if (error) {
+		dev_err(&client->dev, "Failed to initialize input device: %d\n", error);
+		return error;
+	}
+
+	irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, msg2638_ts_irq_handler,
+					  IRQF_ONESHOT, client->name, msg2638);
+	if (error) {
+		dev_err(&client->dev, "Failed to request IRQ: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused msg2638_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct msg2638_ts_data *msg2638 = i2c_get_clientdata(client);
+
+	mutex_lock(&msg2638->input_dev->mutex);
+
+	if (input_device_enabled(msg2638->input_dev))
+		msg2638_stop(msg2638);
+
+	mutex_unlock(&msg2638->input_dev->mutex);
+
+	return 0;
+}
+
+static int __maybe_unused msg2638_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct msg2638_ts_data *msg2638 = i2c_get_clientdata(client);
+	int ret = 0;
+
+	mutex_lock(&msg2638->input_dev->mutex);
+
+	if (input_device_enabled(msg2638->input_dev))
+		ret = msg2638_start(msg2638);
+
+	mutex_unlock(&msg2638->input_dev->mutex);
+
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(msg2638_pm_ops, msg2638_suspend, msg2638_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id msg2638_of_match[] = {
+	{ .compatible = "mstar,msg2638" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, msg2638_of_match);
+#endif
+
+static struct i2c_driver msg2638_ts_driver = {
+	.probe_new = msg2638_ts_probe,
+	.driver = {
+		.name = "MStar-TS",
+		.pm = &msg2638_pm_ops,
+		.of_match_table = of_match_ptr(msg2638_of_match),
+	},
+};
+module_i2c_driver(msg2638_ts_driver);
+
+MODULE_AUTHOR("Vincent Knecht <vincent.knecht@mailoo.org>");
+MODULE_DESCRIPTION("MStar MSG2638 touchscreen driver");
+MODULE_LICENSE("GPL v2");
-- 
2.29.2




^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v5 1/2] dt-bindings: input/touchscreen: add bindings for msg2638
  2021-02-16 16:36 [PATCH v5 1/2] dt-bindings: input/touchscreen: add bindings for msg2638 Vincent Knecht
  2021-02-16 16:36 ` [PATCH v5 2/2] Input: add MStar MSG2638 touchscreen driver Vincent Knecht
@ 2021-03-02  8:50 ` Linus Walleij
  1 sibling, 0 replies; 4+ messages in thread
From: Linus Walleij @ 2021-03-02  8:50 UTC (permalink / raw)
  To: Vincent Knecht
  Cc: phone-devel, ~postmarketos/upstreaming, Dmitry Torokhov,
	Rob Herring, Henrik Rydberg, Michael Srba, Linux Input,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel

On Tue, Feb 16, 2021 at 5:38 PM Vincent Knecht
<vincent.knecht@mailoo.org> wrote:

> This adds dts bindings for the mstar msg2638 touchscreen.
>
> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>

This looks good to me:
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v5 2/2] Input: add MStar MSG2638 touchscreen driver
  2021-02-16 16:36 ` [PATCH v5 2/2] Input: add MStar MSG2638 touchscreen driver Vincent Knecht
@ 2021-03-02  9:00   ` Linus Walleij
  0 siblings, 0 replies; 4+ messages in thread
From: Linus Walleij @ 2021-03-02  9:00 UTC (permalink / raw)
  To: Vincent Knecht
  Cc: phone-devel, ~postmarketos/upstreaming, Dmitry Torokhov,
	Rob Herring, Henrik Rydberg, Michael Srba, Linux Input,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel

Hi Vincent,

thanks for your patch!

On Tue, Feb 16, 2021 at 5:38 PM Vincent Knecht
<vincent.knecht@mailoo.org> wrote:

> Add support for the msg2638 touchscreen IC from MStar.
> This driver reuses zinitix.c structure, while the checksum and irq handler
> functions are based on out-of-tree driver for Alcatel Idol 3 (4.7").
>
> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
> ---
> Changed in v5:
> - use gpiod_set_value_cansleep() (Stephan G)
> - use msleep/usleep_range() rathen than mdelay() (Stephan G)

(...)

> +#include <linux/delay.h>
> +#include <linux/gpio.h>

Please only include
#include <linux/gpio/consumer.h>

> +#define CHIP_ON_DELAY                  15 // ms
> +#define FIRMWARE_ON_DELAY              50 // ms
> +#define RESET_DELAY_MIN                        10000 // µs
> +#define RESET_DELAY_MAX                        11000 // µs

Rename the defines with _MS and _US suffixes so you don't
need the comments, CHIP_ON_DELAY_MS etc.

> +static int msg2638_init_regulators(struct msg2638_ts_data *msg2638)
> +{
> +       struct i2c_client *client = msg2638->client;
> +       int error;

I usually prefer a short name like "err" (cognitive load) but your choice.

> +static u8 msg2638_checksum(u8 *data, u32 length)
> +{
> +       s32 sum = 0;
> +       u32 i;
> +
> +       for (i = 0; i < length; i++)
> +               sum += data[i];
> +
> +       return (u8)((-sum) & 0xFF);
> +}

Interesting checksum algoritm.

> +static int msg2638_start(struct msg2638_ts_data *msg2638)
> +{
> +       int error;
> +
> +       error = regulator_bulk_enable(ARRAY_SIZE(msg2638->supplies),
> +                                     msg2638->supplies);
> +       if (error) {
> +               dev_err(&msg2638->client->dev, "Failed to enable regulators: %d\n", error);
> +               return error;
> +       }
> +
> +       msleep(CHIP_ON_DELAY);
> +
> +       msg2638_power_on(msg2638);

Maybe move enable_irq() here from power on to mirror
the stop() function below?

> +#ifdef CONFIG_OF
> +static const struct of_device_id msg2638_of_match[] = {
> +       { .compatible = "mstar,msg2638" },
> +       { }
> +};
> +MODULE_DEVICE_TABLE(of, msg2638_of_match);
> +#endif

I think these #ifdefs are not needed anymore. We just have struct of_device_id
available at all times.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, back to index

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-16 16:36 [PATCH v5 1/2] dt-bindings: input/touchscreen: add bindings for msg2638 Vincent Knecht
2021-02-16 16:36 ` [PATCH v5 2/2] Input: add MStar MSG2638 touchscreen driver Vincent Knecht
2021-03-02  9:00   ` Linus Walleij
2021-03-02  8:50 ` [PATCH v5 1/2] dt-bindings: input/touchscreen: add bindings for msg2638 Linus Walleij

Phone-Devel Archive on lore.kernel.org.

Archives are clonable:
	git clone --mirror https://lore.kernel.org/phone-devel/0 phone-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 phone-devel phone-devel/ https://lore.kernel.org/phone-devel \
		phone-devel@vger.kernel.org
	public-inbox-index phone-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.phone-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git