From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
agross@kernel.org
Cc: andersson@kernel.org, joro@8bytes.org, will@kernel.org,
robin.murphy@arm.com, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, robdclark@gmail.com,
linux-arm-msm@vger.kernel.org, iommu@lists.linux.dev,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
marijn.suijten@somainline.org, kernel@collabora.com,
luca@z3ntu.xyz, a39.skl@gmail.com, phone-devel@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht
Subject: Re: [PATCH v3 2/6] iommu/qcom: Use the asid read from device-tree if specified
Date: Tue, 7 Mar 2023 17:47:32 +0100 [thread overview]
Message-ID: <bb0ffb47-c015-6315-2da4-341529a4a8ed@linaro.org> (raw)
In-Reply-To: <12f0800c-beb3-6fdc-b743-8624f0d5d6ac@linaro.org>
On 7.03.2023 17:44, Dmitry Baryshkov wrote:
> On 15/11/2022 12:11, AngeloGioacchino Del Regno wrote:
>> As specified in this driver, the context banks are 0x1000 apart but
>> on some SoCs the context number does not necessarily match this
>> logic, hence we end up using the wrong ASID: keeping in mind that
>> this IOMMU implementation relies heavily on SCM (TZ) calls, it is
>> mandatory that we communicate the right context number.
>>
>> Since this is all about how context banks are mapped in firmware,
>> which may be board dependent (as a different firmware version may
>> eventually change the expected context bank numbers), introduce a
>> new property "qcom,ctx-num": when found, the ASID will be forced
>> as read from the devicetree.
>>
>> When "qcom,ctx-num" is not found, this driver retains the previous
>> behavior as to avoid breaking older devicetrees or systems that do
>> not require forcing ASID numbers.
>>
>> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
>> [Marijn: Rebased over next-20221111]
>> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
>> ---
>> drivers/iommu/arm/arm-smmu/qcom_iommu.c | 18 +++++++++++++++---
>> 1 file changed, 15 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/iommu/arm/arm-smmu/qcom_iommu.c b/drivers/iommu/arm/arm-smmu/qcom_iommu.c
>> index bfd7b51eb5db..491a8093f3d6 100644
>> --- a/drivers/iommu/arm/arm-smmu/qcom_iommu.c
>> +++ b/drivers/iommu/arm/arm-smmu/qcom_iommu.c
>> @@ -551,7 +551,8 @@ static int qcom_iommu_of_xlate(struct device *dev, struct of_phandle_args *args)
>> * index into qcom_iommu->ctxs:
>> */
>> if (WARN_ON(asid < 1) ||
>> - WARN_ON(asid > qcom_iommu->num_ctxs)) {
>> + WARN_ON(asid > qcom_iommu->num_ctxs) ||
>> + WARN_ON(qcom_iommu->ctxs[asid - 1] == NULL)) {
>
> Separate change in my opinion. Please split it to a separate patch with proper Fixes: tag.
>
>> put_device(&iommu_pdev->dev);
>> return -EINVAL;
>> }
>> @@ -638,7 +639,8 @@ static int qcom_iommu_sec_ptbl_init(struct device *dev)
>> static int get_asid(const struct device_node *np)
>> {
>> - u32 reg;
>> + u32 reg, val;
>> + int asid;
>> /* read the "reg" property directly to get the relative address
>> * of the context bank, and calculate the asid from that:
>> @@ -646,7 +648,17 @@ static int get_asid(const struct device_node *np)
>> if (of_property_read_u32_index(np, "reg", 0, ®))
Use platform_get_resource(pdev, IORESOURCE_MEM, 0); reg = res->start
or something like this, the current approach relies on #address-cells = <1>
Konrad
>> return -ENODEV;
>> - return reg / 0x1000; /* context banks are 0x1000 apart */
>> + /*
>> + * Context banks are 0x1000 apart but, in some cases, the ASID
>> + * number doesn't match to this logic and needs to be passed
>> + * from the DT configuration explicitly.
>> + */
>> + if (of_property_read_u32(np, "qcom,ctx-num", &val))
>> + asid = reg / 0x1000;
>> + else
>> + asid = val;
>
> As a matter of preference (and logic) I'd have written that as:
>
> if (!of_property_read(np, "qcom,ctx-num", &val))
> asid = val;
> else
> asid = reg / 0x1000;
>
> LGTM otherwise
>
>> +
>> + return asid;
>> }
>> static int qcom_iommu_ctx_probe(struct platform_device *pdev)
>
next prev parent reply other threads:[~2023-03-07 16:52 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-15 10:11 [PATCH v3 0/6] Add support for Qualcomm's legacy IOMMU v2 AngeloGioacchino Del Regno
2022-11-15 10:11 ` [PATCH v3 1/6] dt-bindings: iommu: qcom,iommu: Document qcom,ctx-num property AngeloGioacchino Del Regno
2022-11-15 10:11 ` [PATCH v3 2/6] iommu/qcom: Use the asid read from device-tree if specified AngeloGioacchino Del Regno
2023-03-07 16:44 ` Dmitry Baryshkov
2023-03-07 16:47 ` Konrad Dybcio [this message]
2023-06-20 9:43 ` AngeloGioacchino Del Regno
2022-11-15 10:11 ` [PATCH v3 3/6] iommu/qcom: Properly reset the IOMMU context AngeloGioacchino Del Regno
2023-03-07 16:50 ` Dmitry Baryshkov
2022-11-15 10:11 ` [PATCH v3 4/6] iommu/qcom: Index contexts by asid number to allow asid 0 AngeloGioacchino Del Regno
2023-03-07 16:53 ` Dmitry Baryshkov
2022-11-15 10:11 ` [PATCH v3 5/6] dt-bindings: iommu: qcom,iommu: Document QSMMUv2 and MSM8976 compatibles AngeloGioacchino Del Regno
2022-11-16 12:22 ` Krzysztof Kozlowski
2022-11-15 10:11 ` [PATCH v3 6/6] iommu/qcom: Add support for QSMMUv2 and QSMMU-500 secured contexts AngeloGioacchino Del Regno
2023-03-07 16:58 ` Dmitry Baryshkov
2023-02-22 9:57 ` [PATCH v3 0/6] Add support for Qualcomm's legacy IOMMU v2 AngeloGioacchino Del Regno
2023-06-19 21:42 ` Luca Weiss
2023-06-20 10:02 ` AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bb0ffb47-c015-6315-2da4-341529a4a8ed@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=a39.skl@gmail.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=iommu@lists.linux.dev \
--cc=joro@8bytes.org \
--cc=kernel@collabora.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luca@z3ntu.xyz \
--cc=marijn.suijten@somainline.org \
--cc=phone-devel@vger.kernel.org \
--cc=robdclark@gmail.com \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=will@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).