From: "Michael S. Tsirkin" <mst@redhat.com>
To: Marcel Apfelbaum <marcel@redhat.com>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>,
ehabkost@redhat.com, Marcel Apfelbaum <marcel.a@redhat.com>,
ghammer@redhat.com, qemu-devel@nongnu.org,
lcapitulino@redhat.com, Igor Mammedov <imammedo@redhat.com>,
lersek@redhat.com
Subject: Re: [Qemu-devel] [PATCH v19 3/9] pc: add a Virtual Machine Generation ID device
Date: Tue, 16 Feb 2016 17:10:13 +0200 [thread overview]
Message-ID: <20160216170159-mutt-send-email-mst@redhat.com> (raw)
In-Reply-To: <56C317E1.1020602@redhat.com>
On Tue, Feb 16, 2016 at 02:36:49PM +0200, Marcel Apfelbaum wrote:
> >>2. PCI devices with no driver installed are not re-mapped. This can be OK
> >> from the Windows point of view because Resources Window does not show the MMIO range
> >> for this device.
> >>
> >> If the other (re-mapped) device is working, is pure luck. Both Memory Regions occupy the same range
> >> and have the same priority.
> >>
> >>We need to think about how to solve this.
> >>One way would be to defer the BAR activation to the guest OS, but I am not sure of the consequences.
> >deferring won't solve problem as rebalancing could happen later
> >and make BARs overlap.
>
> Why not? If we do not activate the BAR in firmware and Windows does not have a driver
> for it, will not activate it at all, right?
> Why would Windows activate the device BAR if it can't use it? At least this is what I hope.
> Any other idea would be appreciated.
>
I wonder whether this is related to setting PnP in CMOS.
See e.g. http://oss.sgi.com/LDP/HOWTO/Plug-and-Play-HOWTO-4.html
and https://support.microsoft.com/en-us/kb/321779
> >I've noticed that at startup Windows unmaps and then maps BARs
> >at the same addresses where BIOS've put them before.
>
> Including devices without a working driver?
>
>
> Thanks,
> Marcel
>
> >
> >>And this does not solve the ivshmem problem.
> >So far the only way to avoid overlapping BARs due to Windows
> >doing rebalancing for driver-less devices is to pin such
> >BARs statically with _CRS in ACPI table but as Michael said
> >it fragments PCI address-space.
> >
> >>
> >>Thanks,
> >>Marcel
> >>
> >>
> >>
> >>
> >>
> >
next prev parent reply other threads:[~2016-02-16 15:10 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-28 10:54 [Qemu-devel] [PATCH v19 0/9] Virtual Machine Generation ID Igor Mammedov
2016-01-28 10:54 ` [Qemu-devel] [PATCH v19 1/9] acpi: extend ACPI interface to provide access to ACPI registers and SCI irq Igor Mammedov
2016-01-28 10:54 ` [Qemu-devel] [PATCH v19 2/9] docs: vm generation id device's description Igor Mammedov
2016-01-28 10:54 ` [Qemu-devel] [PATCH v19 3/9] pc: add a Virtual Machine Generation ID device Igor Mammedov
2016-01-28 11:13 ` Michael S. Tsirkin
2016-01-28 12:03 ` Igor Mammedov
2016-01-28 12:59 ` Michael S. Tsirkin
2016-01-29 11:13 ` Igor Mammedov
2016-01-31 16:22 ` Michael S. Tsirkin
2016-02-02 9:59 ` Igor Mammedov
2016-02-02 11:16 ` Michael S. Tsirkin
2016-02-09 10:46 ` Igor Mammedov
2016-02-09 12:17 ` Michael S. Tsirkin
2016-02-11 15:16 ` Igor Mammedov
2016-02-11 16:30 ` Michael S. Tsirkin
2016-02-11 17:34 ` Marcel Apfelbaum
2016-02-12 6:15 ` Michael S. Tsirkin
2016-02-15 10:30 ` Igor Mammedov
2016-02-15 11:26 ` Michael S. Tsirkin
2016-02-15 13:56 ` Igor Mammedov
2016-02-16 10:05 ` Marcel Apfelbaum
2016-02-16 12:17 ` Igor Mammedov
2016-02-16 12:36 ` Marcel Apfelbaum
2016-02-16 13:51 ` Igor Mammedov
2016-02-16 14:53 ` Michael S. Tsirkin
2016-02-16 15:10 ` Michael S. Tsirkin [this message]
2016-02-10 8:51 ` Michael S. Tsirkin
2016-02-10 9:28 ` Michael S. Tsirkin
2016-02-10 10:00 ` Laszlo Ersek
2016-01-28 13:48 ` Laszlo Ersek
2016-01-28 10:54 ` [Qemu-devel] [PATCH v19 4/9] tests: add a unit test for the vmgenid device Igor Mammedov
2016-01-28 10:54 ` [Qemu-devel] [PATCH v19 5/9] qmp/hmp: add query-vm-generation-id and 'info vm-generation-id' commands Igor Mammedov
2016-02-09 17:31 ` Eric Blake
2016-01-28 10:54 ` [Qemu-devel] [PATCH v19 6/9] qmp/hmp: add set-vm-generation-id commands Igor Mammedov
2016-02-09 17:33 ` Eric Blake
2016-01-28 10:54 ` [Qemu-devel] [PATCH v19 8/9] pc: put PIIX3 in slot 1 explicitly and cleanup functions assignment Igor Mammedov
2016-01-28 10:54 ` [Qemu-devel] [PATCH v19 9/9] pc/q53: by default put vmgenid device as an function of ISA bridge Igor Mammedov
2016-01-28 10:58 ` [Qemu-devel] [PATCH v19 7/9] machine: add properties to compat_props incrementaly Igor Mammedov
2016-01-28 14:02 ` Eduardo Habkost
2016-01-28 17:00 ` Igor Mammedov
2016-02-03 17:55 ` [Qemu-devel] qdev & hw/core owner? (was Re: [PATCH v19 7/9] machine: add properties to compat_props incrementaly) Eduardo Habkost
2016-02-03 18:46 ` Laszlo Ersek
2016-02-03 19:06 ` Michael S. Tsirkin
2016-02-04 11:31 ` Paolo Bonzini
2016-02-04 11:41 ` Andreas Färber
2016-02-04 11:55 ` Paolo Bonzini
2016-02-04 12:06 ` Michael S. Tsirkin
2016-02-05 7:49 ` Markus Armbruster
2016-02-05 7:51 ` Marcel Apfelbaum
2016-02-11 19:41 ` Eduardo Habkost
2016-02-12 9:17 ` Marcel Apfelbaum
2016-02-12 11:22 ` Andreas Färber
2016-02-12 18:17 ` Eduardo Habkost
2016-02-12 22:30 ` Paolo Bonzini
2016-02-12 18:09 ` Eduardo Habkost
2016-02-05 7:52 ` Markus Armbruster
2016-02-04 12:03 ` Michael S. Tsirkin
2016-02-04 12:12 ` Marcel Apfelbaum
2016-01-29 12:51 ` [Qemu-devel] [PATCH v19 7/9] machine: add properties to compat_props incrementaly Cornelia Huck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160216170159-mutt-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=ehabkost@redhat.com \
--cc=ghammer@redhat.com \
--cc=guangrong.xiao@linux.intel.com \
--cc=imammedo@redhat.com \
--cc=lcapitulino@redhat.com \
--cc=lersek@redhat.com \
--cc=marcel.a@redhat.com \
--cc=marcel@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).