From: "Philippe Mathieu-Daudé" <philmd@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Esteban Bosse" <estebanbosse@gmail.com>,
"Hervé Poussineau" <hpoussin@reactos.org>,
"Aleksandar Markovic" <amarkovic@wavecomp.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@redhat.com>,
"Aurelien Jarno" <aurelien@aurel32.net>
Subject: [PULL 13/20] hw/pci-host/piix: Extract piix3_create()
Date: Mon, 28 Oct 2019 17:34:40 +0100 [thread overview]
Message-ID: <20191028163447.18541-14-philmd@redhat.com> (raw)
In-Reply-To: <20191028163447.18541-1-philmd@redhat.com>
Extract the PIIX3 creation code from the i440fx_init() function.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Esteban Bosse <estebanbosse@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
hw/pci-host/piix.c | 51 ++++++++++++++++++++++++++++------------------
1 file changed, 31 insertions(+), 20 deletions(-)
diff --git a/hw/pci-host/piix.c b/hw/pci-host/piix.c
index 2f4cbcbfe9..3292703de7 100644
--- a/hw/pci-host/piix.c
+++ b/hw/pci-host/piix.c
@@ -331,6 +331,36 @@ static void i440fx_realize(PCIDevice *dev, Error **errp)
}
}
+static PIIX3State *piix3_create(PCIBus *pci_bus, ISABus **isa_bus)
+{
+ PIIX3State *piix3;
+ PCIDevice *pci_dev;
+
+ /*
+ * Xen supports additional interrupt routes from the PCI devices to
+ * the IOAPIC: the four pins of each PCI device on the bus are also
+ * connected to the IOAPIC directly.
+ * These additional routes can be discovered through ACPI.
+ */
+ if (xen_enabled()) {
+ pci_dev = pci_create_simple_multifunction(pci_bus, -1, true,
+ TYPE_PIIX3_XEN_DEVICE);
+ piix3 = PIIX3_PCI_DEVICE(pci_dev);
+ pci_bus_irqs(pci_bus, xen_piix3_set_irq, xen_pci_slot_get_pirq,
+ piix3, XEN_PIIX_NUM_PIRQS);
+ } else {
+ pci_dev = pci_create_simple_multifunction(pci_bus, -1, true,
+ TYPE_PIIX3_DEVICE);
+ piix3 = PIIX3_PCI_DEVICE(pci_dev);
+ pci_bus_irqs(pci_bus, piix3_set_irq, pci_slot_get_pirq,
+ piix3, PIIX_NUM_PIRQS);
+ pci_bus_set_route_irq_fn(pci_bus, piix3_route_intx_pin_to_irq);
+ }
+ *isa_bus = ISA_BUS(qdev_get_child_bus(DEVICE(piix3), "isa.0"));
+
+ return piix3;
+}
+
PCIBus *i440fx_init(const char *host_type, const char *pci_type,
PCII440FXState **pi440fx_state,
int *piix3_devfn,
@@ -400,27 +430,8 @@ PCIBus *i440fx_init(const char *host_type, const char *pci_type,
PAM_EXPAN_SIZE);
}
- /* Xen supports additional interrupt routes from the PCI devices to
- * the IOAPIC: the four pins of each PCI device on the bus are also
- * connected to the IOAPIC directly.
- * These additional routes can be discovered through ACPI. */
- if (xen_enabled()) {
- PCIDevice *pci_dev = pci_create_simple_multifunction(b,
- -1, true, TYPE_PIIX3_XEN_DEVICE);
- piix3 = PIIX3_PCI_DEVICE(pci_dev);
- pci_bus_irqs(b, xen_piix3_set_irq, xen_pci_slot_get_pirq,
- piix3, XEN_PIIX_NUM_PIRQS);
- } else {
- PCIDevice *pci_dev = pci_create_simple_multifunction(b,
- -1, true, TYPE_PIIX3_DEVICE);
- piix3 = PIIX3_PCI_DEVICE(pci_dev);
- pci_bus_irqs(b, piix3_set_irq, pci_slot_get_pirq, piix3,
- PIIX_NUM_PIRQS);
- pci_bus_set_route_irq_fn(b, piix3_route_intx_pin_to_irq);
- }
+ piix3 = piix3_create(b, isa_bus);
piix3->pic = pic;
- *isa_bus = ISA_BUS(qdev_get_child_bus(DEVICE(piix3), "isa.0"));
-
*piix3_devfn = piix3->dev.devfn;
ram_size = ram_size / 8 / 1024 / 1024;
--
2.21.0
next prev parent reply other threads:[~2019-10-28 18:07 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-28 16:34 [PULL 00/20] hw/i386/pc: Split PIIX3 southbridge from i440FX northbridge Philippe Mathieu-Daudé
2019-10-28 16:34 ` [PULL 01/20] MAINTAINERS: Keep PIIX4 South Bridge separate from PC Chipsets Philippe Mathieu-Daudé
2019-10-28 16:34 ` [PULL 02/20] piix4: Add the Reset Control Register Philippe Mathieu-Daudé
2019-10-28 16:34 ` [PULL 03/20] piix4: Add an i8259 Interrupt Controller as specified in datasheet Philippe Mathieu-Daudé
2019-10-28 16:34 ` [PULL 04/20] Revert "irq: introduce qemu_irq_proxy()" Philippe Mathieu-Daudé
2019-10-28 16:34 ` [PULL 05/20] piix4: Rename PIIX4 object to piix4-isa Philippe Mathieu-Daudé
2019-10-28 16:34 ` [PULL 06/20] piix4: Add an i8257 DMA Controller as specified in datasheet Philippe Mathieu-Daudé
2019-10-28 16:34 ` [PULL 07/20] piix4: Add an i8254 PIT " Philippe Mathieu-Daudé
2019-10-28 16:34 ` [PULL 08/20] piix4: Add a MC146818 RTC " Philippe Mathieu-Daudé
2019-10-28 16:34 ` [PULL 09/20] hw/mips/mips_malta: Create IDE hard drive array dynamically Philippe Mathieu-Daudé
2019-10-28 16:34 ` [PULL 10/20] hw/mips/mips_malta: Extract the PIIX4 creation code as piix4_create() Philippe Mathieu-Daudé
2019-10-28 16:34 ` [PULL 11/20] hw/isa/piix4: Move piix4_create() to hw/isa/piix4.c Philippe Mathieu-Daudé
2019-10-28 16:34 ` [PULL 12/20] hw/i386: Remove obsolete LoadStateHandler::load_state_old handlers Philippe Mathieu-Daudé
2019-10-28 16:34 ` Philippe Mathieu-Daudé [this message]
2019-10-28 16:34 ` [PULL 14/20] hw/pci-host/piix: Move RCR_IOPORT register definition Philippe Mathieu-Daudé
2019-10-28 16:34 ` [PULL 15/20] hw/pci-host/piix: Define and use the PIIX IRQ Route Control Registers Philippe Mathieu-Daudé
2019-10-28 16:34 ` [PULL 16/20] hw/pci-host/piix: Move i440FX declarations to hw/pci-host/i440fx.h Philippe Mathieu-Daudé
2019-10-28 16:34 ` [PULL 17/20] hw/pci-host/piix: Fix code style issues Philippe Mathieu-Daudé
2019-10-28 16:34 ` [PULL 18/20] hw/pci-host/piix: Extract PIIX3 functions to hw/isa/piix3.c Philippe Mathieu-Daudé
2019-10-28 16:34 ` [PULL 19/20] hw/pci-host: Rename incorrectly named 'piix' as 'i440fx' Philippe Mathieu-Daudé
2019-10-28 16:34 ` [PULL 20/20] hw/pci-host/i440fx: Remove the last PIIX3 traces Philippe Mathieu-Daudé
2019-10-28 22:44 ` [PULL 00/20] hw/i386/pc: Split PIIX3 southbridge from i440FX northbridge no-reply
2019-10-29 1:58 ` no-reply
2019-10-29 3:19 ` no-reply
2019-10-29 5:16 ` no-reply
2019-10-29 5:18 ` Aleksandar Markovic
2019-10-29 17:04 ` Philippe Mathieu-Daudé
2019-10-29 22:10 ` Aleksandar Markovic
2019-10-30 6:15 ` Peter Maydell
2019-10-30 9:44 ` Philippe Mathieu-Daudé
2019-11-02 20:28 ` Philippe Mathieu-Daudé
2019-11-02 20:56 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191028163447.18541-14-philmd@redhat.com \
--to=philmd@redhat.com \
--cc=amarkovic@wavecomp.com \
--cc=aurelien@aurel32.net \
--cc=estebanbosse@gmail.com \
--cc=hpoussin@reactos.org \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).