qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: Dongjiu Geng <gengdongjiu@huawei.com>
Cc: fam@euphon.net, peter.maydell@linaro.org,
	xiaoguangrong.eric@gmail.com, kvm@vger.kernel.org,
	mtosatti@redhat.com, qemu-devel@nongnu.org, ehabkost@redhat.com,
	linuxarm@huawei.com, shannon.zhaosl@gmail.com,
	zhengxiang9@huawei.com, qemu-arm@nongnu.org,
	Jonathan.Cameron@huawei.com, pbonzini@redhat.com,
	imammedo@redhat.com, rth@twiddle.net
Subject: Re: [PATCH v25 06/10] ACPI: Record the Generic Error Status Block address
Date: Wed, 6 May 2020 16:23:06 -0400	[thread overview]
Message-ID: <20200506162301-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <20200410114639.32844-7-gengdongjiu@huawei.com>

On Fri, Apr 10, 2020 at 07:46:35PM +0800, Dongjiu Geng wrote:
> Record the GHEB address via fw_cfg file, when recording
> a error to CPER, it will use this address to find out
> Generic Error Data Entries and write the error.
> 
> In order to avoid migration failure, make hardware
> error table address to a part of GED device instead
> of global variable, then this address will be migrated
> to target QEMU.
> 
> Acked-by: Xiang Zheng <zhengxiang9@huawei.com>
> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>

Reviewed-by: Michael S. Tsirkin <mst@redhat.com>

> ---
> change since v24:
> 1. Use s->ghes_state.ghes_addr_le to check in ghes_needed()
> 2. Using hardware_error->len instead of request_block_size to calculate in acpi_ghes_add_fw_cfg()
> 3. Remove assert(vms->acpi_dev) be build APEI table
> 4. Directly use ACPI_GED(vms->acpi_dev) instead of ACPI_GED(vms->acpi_dev)
> ---
>  hw/acpi/generic_event_device.c         | 19 +++++++++++++++++++
>  hw/acpi/ghes.c                         | 14 ++++++++++++++
>  hw/arm/virt-acpi-build.c               |  8 ++++++++
>  include/hw/acpi/generic_event_device.h |  2 ++
>  include/hw/acpi/ghes.h                 |  6 ++++++
>  5 files changed, 49 insertions(+)
> 
> diff --git a/hw/acpi/generic_event_device.c b/hw/acpi/generic_event_device.c
> index 021ed2b..1491291 100644
> --- a/hw/acpi/generic_event_device.c
> +++ b/hw/acpi/generic_event_device.c
> @@ -234,6 +234,24 @@ static const VMStateDescription vmstate_ged_state = {
>      }
>  };
>  
> +static bool ghes_needed(void *opaque)
> +{
> +    AcpiGedState *s = opaque;
> +    return s->ghes_state.ghes_addr_le;
> +}
> +
> +static const VMStateDescription vmstate_ghes_state = {
> +    .name = "acpi-ged/ghes",
> +    .version_id = 1,
> +    .minimum_version_id = 1,
> +    .needed = ghes_needed,
> +    .fields      = (VMStateField[]) {
> +        VMSTATE_STRUCT(ghes_state, AcpiGedState, 1,
> +                       vmstate_ghes_state, AcpiGhesState),
> +        VMSTATE_END_OF_LIST()
> +    }
> +};
> +
>  static const VMStateDescription vmstate_acpi_ged = {
>      .name = "acpi-ged",
>      .version_id = 1,
> @@ -244,6 +262,7 @@ static const VMStateDescription vmstate_acpi_ged = {
>      },
>      .subsections = (const VMStateDescription * []) {
>          &vmstate_memhp_state,
> +        &vmstate_ghes_state,
>          NULL
>      }
>  };
> diff --git a/hw/acpi/ghes.c b/hw/acpi/ghes.c
> index 091fd87..e74af23 100644
> --- a/hw/acpi/ghes.c
> +++ b/hw/acpi/ghes.c
> @@ -24,6 +24,8 @@
>  #include "hw/acpi/ghes.h"
>  #include "hw/acpi/aml-build.h"
>  #include "qemu/error-report.h"
> +#include "hw/acpi/generic_event_device.h"
> +#include "hw/nvram/fw_cfg.h"
>  
>  #define ACPI_GHES_ERRORS_FW_CFG_FILE        "etc/hardware_errors"
>  #define ACPI_GHES_DATA_ADDR_FW_CFG_FILE     "etc/hardware_errors_addr"
> @@ -213,3 +215,15 @@ void acpi_build_hest(GArray *table_data, BIOSLinker *linker)
>      build_header(linker, table_data, (void *)(table_data->data + hest_start),
>          "HEST", table_data->len - hest_start, 1, NULL, NULL);
>  }
> +
> +void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
> +                          GArray *hardware_error)
> +{
> +    /* Create a read-only fw_cfg file for GHES */
> +    fw_cfg_add_file(s, ACPI_GHES_ERRORS_FW_CFG_FILE, hardware_error->data,
> +                    hardware_error->len);
> +
> +    /* Create a read-write fw_cfg file for Address */
> +    fw_cfg_add_file_callback(s, ACPI_GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL,
> +        NULL, &(ags->ghes_addr_le), sizeof(ags->ghes_addr_le), false);
> +}
> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> index f611bce..2726aac 100644
> --- a/hw/arm/virt-acpi-build.c
> +++ b/hw/arm/virt-acpi-build.c
> @@ -911,6 +911,7 @@ void virt_acpi_setup(VirtMachineState *vms)
>  {
>      AcpiBuildTables tables;
>      AcpiBuildState *build_state;
> +    AcpiGedState *acpi_ged_state;
>  
>      if (!vms->fw_cfg) {
>          trace_virt_acpi_setup();
> @@ -941,6 +942,13 @@ void virt_acpi_setup(VirtMachineState *vms)
>      fw_cfg_add_file(vms->fw_cfg, ACPI_BUILD_TPMLOG_FILE, tables.tcpalog->data,
>                      acpi_data_len(tables.tcpalog));
>  
> +    if (vms->ras) {
> +        assert(vms->acpi_dev);
> +        acpi_ged_state = ACPI_GED(vms->acpi_dev);
> +        acpi_ghes_add_fw_cfg(&acpi_ged_state->ghes_state,
> +                             vms->fw_cfg, tables.hardware_errors);
> +    }
> +
>      build_state->rsdp_mr = acpi_add_rom_blob(virt_acpi_build_update,
>                                               build_state, tables.rsdp,
>                                               ACPI_BUILD_RSDP_FILE, 0);
> diff --git a/include/hw/acpi/generic_event_device.h b/include/hw/acpi/generic_event_device.h
> index d157eac..037d2b5 100644
> --- a/include/hw/acpi/generic_event_device.h
> +++ b/include/hw/acpi/generic_event_device.h
> @@ -61,6 +61,7 @@
>  
>  #include "hw/sysbus.h"
>  #include "hw/acpi/memory_hotplug.h"
> +#include "hw/acpi/ghes.h"
>  
>  #define ACPI_POWER_BUTTON_DEVICE "PWRB"
>  
> @@ -95,6 +96,7 @@ typedef struct AcpiGedState {
>      GEDState ged_state;
>      uint32_t ged_event_bitmap;
>      qemu_irq irq;
> +    AcpiGhesState ghes_state;
>  } AcpiGedState;
>  
>  void build_ged_aml(Aml *table, const char* name, HotplugHandler *hotplug_dev,
> diff --git a/include/hw/acpi/ghes.h b/include/hw/acpi/ghes.h
> index 18debd8..a3420fc 100644
> --- a/include/hw/acpi/ghes.h
> +++ b/include/hw/acpi/ghes.h
> @@ -62,6 +62,12 @@ enum {
>      ACPI_HEST_SRC_ID_RESERVED,
>  };
>  
> +typedef struct AcpiGhesState {
> +    uint64_t ghes_addr_le;
> +} AcpiGhesState;
> +
>  void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker);
>  void acpi_build_hest(GArray *table_data, BIOSLinker *linker);
> +void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
> +                          GArray *hardware_errors);
>  #endif
> -- 
> 1.8.3.1



  parent reply	other threads:[~2020-05-06 20:24 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-10 11:46 [PATCH v25 00/10] Add ARMv8 RAS virtualization support in QEMU Dongjiu Geng
2020-04-10 11:46 ` [PATCH v25 01/10] acpi: nvdimm: change NVDIMM_UUID_LE to a common macro Dongjiu Geng
2020-04-17 13:15   ` Peter Maydell
2020-04-10 11:46 ` [PATCH v25 02/10] hw/arm/virt: Introduce a RAS machine option Dongjiu Geng
2020-05-05 10:23   ` Igor Mammedov
2020-04-10 11:46 ` [PATCH v25 03/10] docs: APEI GHES generation and CPER record description Dongjiu Geng
2020-04-10 11:46 ` [PATCH v25 04/10] ACPI: Build related register address fields via hardware error fw_cfg blob Dongjiu Geng
2020-05-06 20:22   ` Michael S. Tsirkin
2020-04-10 11:46 ` [PATCH v25 05/10] ACPI: Build Hardware Error Source Table Dongjiu Geng
2020-05-05 10:29   ` Igor Mammedov
2020-05-06 20:22   ` Michael S. Tsirkin
2020-04-10 11:46 ` [PATCH v25 06/10] ACPI: Record the Generic Error Status Block address Dongjiu Geng
2020-05-05 10:31   ` Igor Mammedov
2020-05-06 20:23   ` Michael S. Tsirkin [this message]
2020-04-10 11:46 ` [PATCH v25 07/10] KVM: Move hwpoison page related functions into kvm-all.c Dongjiu Geng
2020-04-10 11:46 ` [PATCH v25 08/10] ACPI: Record Generic Error Status Block(GESB) table Dongjiu Geng
2020-05-05 10:44   ` Igor Mammedov
2020-05-06 11:20     ` gengdongjiu
2020-05-06 20:23   ` Michael S. Tsirkin
2020-04-10 11:46 ` [PATCH v25 09/10] target-arm: kvm64: handle SIGBUS signal from kernel or KVM Dongjiu Geng
2020-05-05 11:23   ` Igor Mammedov
2020-04-10 11:46 ` [PATCH v25 10/10] MAINTAINERS: Add ACPI/HEST/GHES entries Dongjiu Geng
2020-04-16 13:53 ` [PATCH v25 00/10] Add ARMv8 RAS virtualization support in QEMU gengdongjiu
     [not found] ` <5e9863af.1c69fb81.dbe22.5caaSMTPIN_ADDED_BROKEN@mx.google.com>
2020-04-16 14:02   ` Peter Maydell
2020-04-17 13:32 ` Peter Maydell
2020-04-17 13:37   ` gengdongjiu
2020-04-18  2:40   ` gengdongjiu
2020-04-30  3:56   ` gengdongjiu
2020-04-30 12:00     ` Igor Mammedov
2020-05-06 11:42   ` gengdongjiu
2020-05-06 20:25     ` Michael S. Tsirkin
2020-05-07  4:30       ` gengdongjiu
2020-05-07 13:46       ` gengdongjiu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200506162301-mutt-send-email-mst@kernel.org \
    --to=mst@redhat.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=ehabkost@redhat.com \
    --cc=fam@euphon.net \
    --cc=gengdongjiu@huawei.com \
    --cc=imammedo@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=mtosatti@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=rth@twiddle.net \
    --cc=shannon.zhaosl@gmail.com \
    --cc=xiaoguangrong.eric@gmail.com \
    --cc=zhengxiang9@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).