From: Havard Skinnemoen <hskinnemoen@google.com>
To: peter.maydell@linaro.org, f4bug@amsat.org
Cc: qemu-arm@nongnu.org, qemu-devel@nongnu.org,
Avi.Fishman@nuvoton.com, kfting@nuvoton.com,
Havard Skinnemoen <hskinnemoen@google.com>,
Joel Stanley <joel@jms.id.au>
Subject: [PATCH v5 03/11] hw/timer: Add NPCM7xx Timer device model
Date: Wed, 8 Jul 2020 17:36:00 -0700 [thread overview]
Message-ID: <20200709003608.3834629-4-hskinnemoen@google.com> (raw)
In-Reply-To: <20200709003608.3834629-1-hskinnemoen@google.com>
The NPCM730 and NPCM750 SoCs have three timer modules each holding five
timers and some shared registers (e.g. interrupt status).
Each timer runs at 25 MHz divided by a prescaler, and counts down from a
configurable initial value to zero. When zero is reached, the interrupt
flag for the timer is set, and the timer is disabled (one-shot mode) or
reloaded from its initial value (periodic mode).
This implementation is sufficient to boot a Linux kernel configured for
NPCM750. Note that the kernel does not seem to actually turn on the
interrupts.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
---
include/hw/timer/npcm7xx_timer.h | 96 +++++++
hw/timer/npcm7xx_timer.c | 468 +++++++++++++++++++++++++++++++
hw/timer/Makefile.objs | 1 +
hw/timer/trace-events | 5 +
4 files changed, 570 insertions(+)
create mode 100644 include/hw/timer/npcm7xx_timer.h
create mode 100644 hw/timer/npcm7xx_timer.c
diff --git a/include/hw/timer/npcm7xx_timer.h b/include/hw/timer/npcm7xx_timer.h
new file mode 100644
index 0000000000..94900a7877
--- /dev/null
+++ b/include/hw/timer/npcm7xx_timer.h
@@ -0,0 +1,96 @@
+/*
+ * Nuvoton NPCM7xx Timer Controller
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef NPCM7XX_TIMER_H
+#define NPCM7XX_TIMER_H
+
+#include "exec/memory.h"
+#include "hw/sysbus.h"
+#include "qemu/timer.h"
+
+/* Each Timer Module (TIM) instance holds five 25 MHz timers. */
+#define NPCM7XX_TIMERS_PER_CTRL (5)
+
+/**
+ * enum NPCM7xxTimerRegisters - 32-bit register indices.
+ */
+enum NPCM7xxTimerRegisters {
+ NPCM7XX_TIMER_TCSR0,
+ NPCM7XX_TIMER_TCSR1,
+ NPCM7XX_TIMER_TICR0,
+ NPCM7XX_TIMER_TICR1,
+ NPCM7XX_TIMER_TDR0,
+ NPCM7XX_TIMER_TDR1,
+ NPCM7XX_TIMER_TISR,
+ NPCM7XX_TIMER_WTCR,
+ NPCM7XX_TIMER_TCSR2,
+ NPCM7XX_TIMER_TCSR3,
+ NPCM7XX_TIMER_TICR2,
+ NPCM7XX_TIMER_TICR3,
+ NPCM7XX_TIMER_TDR2,
+ NPCM7XX_TIMER_TDR3,
+ NPCM7XX_TIMER_TCSR4 = 0x0040 / sizeof(uint32_t),
+ NPCM7XX_TIMER_TICR4 = 0x0048 / sizeof(uint32_t),
+ NPCM7XX_TIMER_TDR4 = 0x0050 / sizeof(uint32_t),
+ NPCM7XX_TIMER_NR_REGS,
+};
+
+typedef struct NPCM7xxTimerCtrlState NPCM7xxTimerCtrlState;
+
+/**
+ * struct NPCM7xxTimer - Individual timer state.
+ * @irq: GIC interrupt line to fire on expiration (if enabled).
+ * @qtimer: QEMU timer that notifies us on expiration.
+ * @expires_ns: Absolute virtual expiration time.
+ * @remaining_ns: Remaining time until expiration if timer is paused.
+ * @tcsr: The Timer Control and Status Register.
+ * @ticr: The Timer Initial Count Register.
+ */
+typedef struct NPCM7xxTimer {
+ NPCM7xxTimerCtrlState *ctrl;
+
+ qemu_irq irq;
+ QEMUTimer qtimer;
+ int64_t expires_ns;
+ int64_t remaining_ns;
+
+ uint32_t tcsr;
+ uint32_t ticr;
+} NPCM7xxTimer;
+
+/**
+ * struct NPCM7xxTimerCtrlState - Timer Module device state.
+ * @parent: System bus device.
+ * @iomem: Memory region through which registers are accessed.
+ * @tisr: The Timer Interrupt Status Register.
+ * @wtcr: The Watchdog Timer Control Register.
+ * @timer: The five individual timers managed by this module.
+ */
+struct NPCM7xxTimerCtrlState {
+ SysBusDevice parent;
+
+ MemoryRegion iomem;
+
+ uint32_t tisr;
+ uint32_t wtcr;
+
+ NPCM7xxTimer timer[NPCM7XX_TIMERS_PER_CTRL];
+};
+
+#define TYPE_NPCM7XX_TIMER "npcm7xx-timer"
+#define NPCM7XX_TIMER(obj) \
+ OBJECT_CHECK(NPCM7xxTimerCtrlState, (obj), TYPE_NPCM7XX_TIMER)
+
+#endif /* NPCM7XX_TIMER_H */
diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c
new file mode 100644
index 0000000000..b0a72aef75
--- /dev/null
+++ b/hw/timer/npcm7xx_timer.c
@@ -0,0 +1,468 @@
+/*
+ * Nuvoton NPCM7xx Timer Controller
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+
+#include "hw/irq.h"
+#include "hw/timer/npcm7xx_timer.h"
+#include "migration/vmstate.h"
+#include "qemu/bitops.h"
+#include "qemu/error-report.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "qemu/timer.h"
+#include "qemu/units.h"
+#include "trace.h"
+
+/* Register field definitions. */
+#define NPCM7XX_TCSR_CEN BIT(30)
+#define NPCM7XX_TCSR_IE BIT(29)
+#define NPCM7XX_TCSR_PERIODIC BIT(27)
+#define NPCM7XX_TCSR_CRST BIT(26)
+#define NPCM7XX_TCSR_CACT BIT(25)
+#define NPCM7XX_TCSR_RSVD 0x21ffff00
+#define NPCM7XX_TCSR_PRESCALE_START 0
+#define NPCM7XX_TCSR_PRESCALE_LEN 8
+
+/* The reference clock frequency is always 25 MHz. */
+#define NPCM7XX_TIMER_REF_HZ (25000000)
+
+/* Return the value by which to divide the reference clock rate. */
+static uint32_t npcm7xx_timer_prescaler(const NPCM7xxTimer *t)
+{
+ return extract32(t->tcsr, NPCM7XX_TCSR_PRESCALE_START,
+ NPCM7XX_TCSR_PRESCALE_LEN) + 1;
+}
+
+/* Convert a timer cycle count to a time interval in nanoseconds. */
+static int64_t npcm7xx_timer_count_to_ns(NPCM7xxTimer *t, uint32_t count)
+{
+ int64_t ns = count;
+
+ ns *= NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ;
+ ns *= npcm7xx_timer_prescaler(t);
+
+ return ns;
+}
+
+/* Convert a time interval in nanoseconds to a timer cycle count. */
+static uint32_t npcm7xx_timer_ns_to_count(NPCM7xxTimer *t, int64_t ns)
+{
+ int64_t count;
+
+ count = ns / (NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ);
+ count /= npcm7xx_timer_prescaler(t);
+
+ return count;
+}
+
+/*
+ * Raise the interrupt line if there's a pending interrupt and interrupts are
+ * enabled for this timer. If not, lower it.
+ */
+static void npcm7xx_timer_check_interrupt(NPCM7xxTimer *t)
+{
+ NPCM7xxTimerCtrlState *tc = t->ctrl;
+ /* Find the array index of this timer. */
+ int index = t - tc->timer;
+
+ g_assert(index >= 0 && index < NPCM7XX_TIMERS_PER_CTRL);
+
+ if ((t->tcsr & NPCM7XX_TCSR_IE) && (tc->tisr & BIT(index))) {
+ qemu_irq_raise(t->irq);
+ trace_npcm7xx_timer_irq(DEVICE(tc)->canonical_path, index, 1);
+ } else {
+ qemu_irq_lower(t->irq);
+ trace_npcm7xx_timer_irq(DEVICE(tc)->canonical_path, index, 0);
+ }
+}
+
+/* Start or resume the timer. */
+static void npcm7xx_timer_start(NPCM7xxTimer *t)
+{
+ int64_t now;
+
+ now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+ t->expires_ns = now + t->remaining_ns;
+ timer_mod(&t->qtimer, t->expires_ns);
+}
+
+/*
+ * Called when the counter reaches zero. Sets the interrupt flag, and either
+ * restarts or disables the timer.
+ */
+static void npcm7xx_timer_reached_zero(NPCM7xxTimer *t)
+{
+ NPCM7xxTimerCtrlState *tc = t->ctrl;
+ int index = t - tc->timer;
+
+ g_assert(index >= 0 && index < NPCM7XX_TIMERS_PER_CTRL);
+
+ tc->tisr |= BIT(index);
+
+ if (t->tcsr & NPCM7XX_TCSR_PERIODIC) {
+ t->remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr);
+ if (t->tcsr & NPCM7XX_TCSR_CEN) {
+ npcm7xx_timer_start(t);
+ }
+ } else {
+ t->tcsr &= ~(NPCM7XX_TCSR_CEN | NPCM7XX_TCSR_CACT);
+ }
+
+ npcm7xx_timer_check_interrupt(t);
+}
+
+/* Stop counting. Record the time remaining so we can continue later. */
+static void npcm7xx_timer_pause(NPCM7xxTimer *t)
+{
+ int64_t now;
+
+ timer_del(&t->qtimer);
+ now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+ t->remaining_ns = t->expires_ns - now;
+ if (t->remaining_ns <= 0) {
+ npcm7xx_timer_reached_zero(t);
+ }
+}
+
+/*
+ * Restart the timer from its initial value. If the timer was enabled and stays
+ * enabled, adjust the QEMU timer according to the new count. If the timer is
+ * transitioning from disabled to enabled, the caller is expected to start the
+ * timer later.
+ */
+static void npcm7xx_timer_restart(NPCM7xxTimer *t, uint32_t old_tcsr)
+{
+ t->remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr);
+
+ if (old_tcsr & t->tcsr & NPCM7XX_TCSR_CEN) {
+ npcm7xx_timer_start(t);
+ }
+}
+
+/* Register read and write handlers */
+
+static void npcm7xx_timer_write_tcsr(NPCM7xxTimer *t, uint32_t new_tcsr)
+{
+ uint32_t old_tcsr = t->tcsr;
+
+ if (new_tcsr & NPCM7XX_TCSR_RSVD) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: reserved bits in 0x%08x ignored\n",
+ __func__, new_tcsr);
+ new_tcsr &= ~NPCM7XX_TCSR_RSVD;
+ }
+ if (new_tcsr & NPCM7XX_TCSR_CACT) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: read-only bits in 0x%08x ignored\n",
+ __func__, new_tcsr);
+ new_tcsr &= ~NPCM7XX_TCSR_CACT;
+ }
+
+ t->tcsr = (t->tcsr & NPCM7XX_TCSR_CACT) | new_tcsr;
+
+ if ((old_tcsr ^ new_tcsr) & NPCM7XX_TCSR_IE) {
+ npcm7xx_timer_check_interrupt(t);
+ }
+ if (new_tcsr & NPCM7XX_TCSR_CRST) {
+ npcm7xx_timer_restart(t, old_tcsr);
+ t->tcsr &= ~NPCM7XX_TCSR_CRST;
+ }
+ if ((old_tcsr ^ new_tcsr) & NPCM7XX_TCSR_CEN) {
+ if (new_tcsr & NPCM7XX_TCSR_CEN) {
+ npcm7xx_timer_start(t);
+ } else {
+ npcm7xx_timer_pause(t);
+ }
+ }
+}
+
+static void npcm7xx_timer_write_ticr(NPCM7xxTimer *t, uint32_t new_ticr)
+{
+ t->ticr = new_ticr;
+
+ npcm7xx_timer_restart(t, t->tcsr);
+}
+
+static uint32_t npcm7xx_timer_read_tdr(NPCM7xxTimer *t)
+{
+ if (t->tcsr & NPCM7XX_TCSR_CEN) {
+ int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+
+ return npcm7xx_timer_ns_to_count(t, t->expires_ns - now);
+ }
+
+ return npcm7xx_timer_ns_to_count(t, t->remaining_ns);
+}
+
+static uint64_t npcm7xx_timer_read(void *opaque, hwaddr offset, unsigned size)
+{
+ NPCM7xxTimerCtrlState *s = opaque;
+ uint64_t value = 0;
+ hwaddr reg;
+
+ reg = offset / sizeof(uint32_t);
+ switch (reg) {
+ case NPCM7XX_TIMER_TCSR0:
+ value = s->timer[0].tcsr;
+ break;
+ case NPCM7XX_TIMER_TCSR1:
+ value = s->timer[1].tcsr;
+ break;
+ case NPCM7XX_TIMER_TCSR2:
+ value = s->timer[2].tcsr;
+ break;
+ case NPCM7XX_TIMER_TCSR3:
+ value = s->timer[3].tcsr;
+ break;
+ case NPCM7XX_TIMER_TCSR4:
+ value = s->timer[4].tcsr;
+ break;
+
+ case NPCM7XX_TIMER_TICR0:
+ value = s->timer[0].ticr;
+ break;
+ case NPCM7XX_TIMER_TICR1:
+ value = s->timer[1].ticr;
+ break;
+ case NPCM7XX_TIMER_TICR2:
+ value = s->timer[2].ticr;
+ break;
+ case NPCM7XX_TIMER_TICR3:
+ value = s->timer[3].ticr;
+ break;
+ case NPCM7XX_TIMER_TICR4:
+ value = s->timer[4].ticr;
+ break;
+
+ case NPCM7XX_TIMER_TDR0:
+ value = npcm7xx_timer_read_tdr(&s->timer[0]);
+ break;
+ case NPCM7XX_TIMER_TDR1:
+ value = npcm7xx_timer_read_tdr(&s->timer[1]);
+ break;
+ case NPCM7XX_TIMER_TDR2:
+ value = npcm7xx_timer_read_tdr(&s->timer[2]);
+ break;
+ case NPCM7XX_TIMER_TDR3:
+ value = npcm7xx_timer_read_tdr(&s->timer[3]);
+ break;
+ case NPCM7XX_TIMER_TDR4:
+ value = npcm7xx_timer_read_tdr(&s->timer[4]);
+ break;
+
+ case NPCM7XX_TIMER_TISR:
+ value = s->tisr;
+ break;
+
+ case NPCM7XX_TIMER_WTCR:
+ value = s->wtcr;
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid offset 0x%04x\n",
+ __func__, (unsigned int)offset);
+ break;
+ }
+
+ trace_npcm7xx_timer_read(DEVICE(s)->canonical_path, offset, value);
+
+ return value;
+}
+
+static void npcm7xx_timer_write(void *opaque, hwaddr offset,
+ uint64_t v, unsigned size)
+{
+ uint32_t reg = offset / sizeof(uint32_t);
+ NPCM7xxTimerCtrlState *s = opaque;
+ uint32_t value = v;
+
+ trace_npcm7xx_timer_write(DEVICE(s)->canonical_path, offset, value);
+
+ switch (reg) {
+ case NPCM7XX_TIMER_TCSR0:
+ npcm7xx_timer_write_tcsr(&s->timer[0], value);
+ return;
+ case NPCM7XX_TIMER_TCSR1:
+ npcm7xx_timer_write_tcsr(&s->timer[1], value);
+ return;
+ case NPCM7XX_TIMER_TCSR2:
+ npcm7xx_timer_write_tcsr(&s->timer[2], value);
+ return;
+ case NPCM7XX_TIMER_TCSR3:
+ npcm7xx_timer_write_tcsr(&s->timer[3], value);
+ return;
+ case NPCM7XX_TIMER_TCSR4:
+ npcm7xx_timer_write_tcsr(&s->timer[4], value);
+ return;
+
+ case NPCM7XX_TIMER_TICR0:
+ npcm7xx_timer_write_ticr(&s->timer[0], value);
+ return;
+ case NPCM7XX_TIMER_TICR1:
+ npcm7xx_timer_write_ticr(&s->timer[1], value);
+ return;
+ case NPCM7XX_TIMER_TICR2:
+ npcm7xx_timer_write_ticr(&s->timer[2], value);
+ return;
+ case NPCM7XX_TIMER_TICR3:
+ npcm7xx_timer_write_ticr(&s->timer[3], value);
+ return;
+ case NPCM7XX_TIMER_TICR4:
+ npcm7xx_timer_write_ticr(&s->timer[4], value);
+ return;
+
+ case NPCM7XX_TIMER_TDR0:
+ case NPCM7XX_TIMER_TDR1:
+ case NPCM7XX_TIMER_TDR2:
+ case NPCM7XX_TIMER_TDR3:
+ case NPCM7XX_TIMER_TDR4:
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: register @ 0x%04x is read-only\n",
+ __func__, (unsigned int)offset);
+ return;
+
+ case NPCM7XX_TIMER_TISR:
+ s->tisr &= ~value;
+ return;
+
+ case NPCM7XX_TIMER_WTCR:
+ qemu_log_mask(LOG_UNIMP, "%s: WTCR write not implemented: 0x%08x\n",
+ __func__, value);
+ return;
+ }
+
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid offset 0x%04x\n",
+ __func__, (unsigned int)offset);
+}
+
+static const struct MemoryRegionOps npcm7xx_timer_ops = {
+ .read = npcm7xx_timer_read,
+ .write = npcm7xx_timer_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ .unaligned = false,
+ },
+};
+
+/* Called when the QEMU timer expires. */
+static void npcm7xx_timer_expired(void *opaque)
+{
+ NPCM7xxTimer *t = opaque;
+
+ if (t->tcsr & NPCM7XX_TCSR_CEN) {
+ npcm7xx_timer_reached_zero(t);
+ }
+}
+
+static void npcm7xx_timer_enter_reset(Object *obj, ResetType type)
+{
+ NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(obj);
+ int i;
+
+ for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) {
+ NPCM7xxTimer *t = &s->timer[i];
+
+ timer_del(&t->qtimer);
+ t->expires_ns = 0;
+ t->remaining_ns = 0;
+ t->tcsr = 0x00000005;
+ t->ticr = 0x00000000;
+ }
+
+ s->tisr = 0x00000000;
+ s->wtcr = 0x00000400;
+}
+
+static void npcm7xx_timer_hold_reset(Object *obj)
+{
+ NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(obj);
+ int i;
+
+ for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) {
+ qemu_irq_lower(s->timer[i].irq);
+ }
+}
+
+static void npcm7xx_timer_realize(DeviceState *dev, Error **errp)
+{
+ NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(dev);
+ SysBusDevice *sbd = &s->parent;
+ int i;
+
+ for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) {
+ NPCM7xxTimer *t = &s->timer[i];
+ t->ctrl = s;
+ timer_init_ns(&t->qtimer, QEMU_CLOCK_VIRTUAL, npcm7xx_timer_expired, t);
+ sysbus_init_irq(sbd, &t->irq);
+ }
+
+ memory_region_init_io(&s->iomem, OBJECT(s), &npcm7xx_timer_ops, s,
+ TYPE_NPCM7XX_TIMER, 4 * KiB);
+ sysbus_init_mmio(sbd, &s->iomem);
+}
+
+static const VMStateDescription vmstate_npcm7xx_timer = {
+ .name = "npcm7xx-timer",
+ .version_id = 0,
+ .minimum_version_id = 0,
+ .fields = (VMStateField[]) {
+ VMSTATE_TIMER(qtimer, NPCM7xxTimer),
+ VMSTATE_INT64(expires_ns, NPCM7xxTimer),
+ VMSTATE_INT64(remaining_ns, NPCM7xxTimer),
+ VMSTATE_UINT32(tcsr, NPCM7xxTimer),
+ VMSTATE_UINT32(ticr, NPCM7xxTimer),
+ VMSTATE_END_OF_LIST(),
+ },
+};
+
+static const VMStateDescription vmstate_npcm7xx_timer_ctrl = {
+ .name = "npcm7xx-timer-ctrl",
+ .version_id = 0,
+ .minimum_version_id = 0,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(tisr, NPCM7xxTimerCtrlState),
+ VMSTATE_UINT32(wtcr, NPCM7xxTimerCtrlState),
+ VMSTATE_STRUCT_ARRAY(timer, NPCM7xxTimerCtrlState,
+ NPCM7XX_TIMERS_PER_CTRL, 0, vmstate_npcm7xx_timer,
+ NPCM7xxTimer),
+ VMSTATE_END_OF_LIST(),
+ },
+};
+
+static void npcm7xx_timer_class_init(ObjectClass *klass, void *data)
+{
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->desc = "NPCM7xx Timer Controller";
+ dc->realize = npcm7xx_timer_realize;
+ dc->vmsd = &vmstate_npcm7xx_timer_ctrl;
+ rc->phases.enter = npcm7xx_timer_enter_reset;
+ rc->phases.hold = npcm7xx_timer_hold_reset;
+}
+
+static const TypeInfo npcm7xx_timer_info = {
+ .name = TYPE_NPCM7XX_TIMER,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(NPCM7xxTimerCtrlState),
+ .class_init = npcm7xx_timer_class_init,
+};
+
+static void npcm7xx_timer_register_type(void)
+{
+ type_register_static(&npcm7xx_timer_info);
+}
+type_init(npcm7xx_timer_register_type);
diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs
index a39f6ec0c2..84c484dda8 100644
--- a/hw/timer/Makefile.objs
+++ b/hw/timer/Makefile.objs
@@ -14,6 +14,7 @@ common-obj-$(CONFIG_IMX) += imx_epit.o
common-obj-$(CONFIG_IMX) += imx_gpt.o
common-obj-$(CONFIG_LM32) += lm32_timer.o
common-obj-$(CONFIG_MILKYMIST) += milkymist-sysctl.o
+common-obj-$(CONFIG_NPCM7XX) += npcm7xx_timer.o
common-obj-$(CONFIG_NRF51_SOC) += nrf51_timer.o
common-obj-$(CONFIG_ALTERA_TIMER) += altera_timer.o
diff --git a/hw/timer/trace-events b/hw/timer/trace-events
index 866c9f546a..e2434ecf3f 100644
--- a/hw/timer/trace-events
+++ b/hw/timer/trace-events
@@ -66,6 +66,11 @@ cmsdk_apb_dualtimer_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK A
cmsdk_apb_dualtimer_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB dualtimer write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
cmsdk_apb_dualtimer_reset(void) "CMSDK APB dualtimer: reset"
+# npcm7xx_timer.c
+npcm7xx_timer_read(const char *id, uint64_t offset, uint64_t value) " %s offset: 0x%04" PRIx64 " value 0x%08" PRIx64
+npcm7xx_timer_write(const char *id, uint64_t offset, uint64_t value) "%s offset: 0x%04" PRIx64 " value 0x%08" PRIx64
+npcm7xx_timer_irq(const char *id, int timer, int state) "%s timer %d state %d"
+
# nrf51_timer.c
nrf51_timer_read(uint8_t timer_id, uint64_t addr, uint32_t value, unsigned size) "timer %u read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u"
nrf51_timer_write(uint8_t timer_id, uint64_t addr, uint32_t value, unsigned size) "timer %u write addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u"
--
2.27.0.383.g050319c2ae-goog
next prev parent reply other threads:[~2020-07-09 0:37 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-09 0:35 [PATCH v5 00/11] Add Nuvoton NPCM730/NPCM750 SoCs and two BMC machines Havard Skinnemoen
2020-07-09 0:35 ` [PATCH v5 01/11] hw/misc: Add NPCM7xx System Global Control Registers device model Havard Skinnemoen
2020-07-09 6:04 ` Philippe Mathieu-Daudé
2020-07-09 6:43 ` Havard Skinnemoen
2020-07-09 16:23 ` Philippe Mathieu-Daudé
2020-07-09 17:09 ` Havard Skinnemoen
2020-07-09 17:24 ` Philippe Mathieu-Daudé
2020-07-09 17:42 ` Havard Skinnemoen
2020-07-10 9:31 ` Philippe Mathieu-Daudé
2020-07-11 6:46 ` Havard Skinnemoen
2020-07-12 5:49 ` Havard Skinnemoen
2020-07-09 0:35 ` [PATCH v5 02/11] hw/misc: Add NPCM7xx Clock Controller " Havard Skinnemoen
2020-07-15 7:18 ` Philippe Mathieu-Daudé
2020-07-09 0:36 ` Havard Skinnemoen [this message]
2020-07-15 7:25 ` [PATCH v5 03/11] hw/timer: Add NPCM7xx Timer " Philippe Mathieu-Daudé
2020-07-15 23:04 ` Havard Skinnemoen
2020-07-16 8:04 ` Philippe Mathieu-Daudé
2020-07-09 0:36 ` [PATCH v5 04/11] hw/arm: Add NPCM730 and NPCM750 SoC models Havard Skinnemoen
2020-07-09 6:11 ` Philippe Mathieu-Daudé
2020-07-13 15:02 ` Cédric Le Goater
2020-07-14 0:44 ` Havard Skinnemoen
2020-07-14 11:37 ` Philippe Mathieu-Daudé
2020-07-14 16:01 ` Markus Armbruster
2020-07-14 17:11 ` Philippe Mathieu-Daudé
2020-07-15 1:03 ` Havard Skinnemoen
2020-07-15 9:35 ` Markus Armbruster
2020-07-09 0:36 ` [PATCH v5 05/11] hw/arm: Add two NPCM7xx-based machines Havard Skinnemoen
2020-07-09 5:57 ` Philippe Mathieu-Daudé
2020-07-09 6:09 ` Philippe Mathieu-Daudé
2020-07-09 0:36 ` [PATCH v5 06/11] hw/arm: Load -bios image as a boot ROM for npcm7xx Havard Skinnemoen
2020-07-13 17:50 ` Philippe Mathieu-Daudé
2020-07-09 0:36 ` [PATCH v5 07/11] hw/nvram: NPCM7xx OTP device model Havard Skinnemoen
2020-07-09 0:36 ` [PATCH v5 08/11] hw/mem: Stubbed out NPCM7xx Memory Controller model Havard Skinnemoen
2020-07-09 16:29 ` Philippe Mathieu-Daudé
2020-07-09 0:36 ` [PATCH v5 09/11] hw/ssi: NPCM7xx Flash Interface Unit device model Havard Skinnemoen
2020-07-09 17:00 ` Philippe Mathieu-Daudé
2020-07-12 5:42 ` Havard Skinnemoen
2020-07-13 17:38 ` Philippe Mathieu-Daudé
2020-07-14 2:39 ` Havard Skinnemoen
2020-07-09 0:36 ` [PATCH v5 10/11] hw/arm: Wire up BMC boot flash for npcm750-evb and quanta-gsj Havard Skinnemoen
2020-07-13 14:57 ` Cédric Le Goater
2020-07-13 17:59 ` Philippe Mathieu-Daudé
2020-07-13 18:02 ` Philippe Mathieu-Daudé
2020-07-14 2:56 ` Havard Skinnemoen
2020-07-14 9:16 ` Markus Armbruster
2020-07-14 11:29 ` Philippe Mathieu-Daudé
2020-07-14 16:21 ` Markus Armbruster
2020-07-14 17:16 ` Philippe Mathieu-Daudé
2020-07-15 9:00 ` Markus Armbruster
2020-07-15 10:57 ` Philippe Mathieu-Daudé
2020-07-15 20:54 ` Havard Skinnemoen
2020-07-16 20:56 ` Havard Skinnemoen
2020-07-17 7:48 ` Philippe Mathieu-Daudé
2020-07-17 8:03 ` Thomas Huth
2020-07-17 8:27 ` Philippe Mathieu-Daudé
2020-07-17 9:00 ` Philippe Mathieu-Daudé
2020-07-17 19:18 ` Havard Skinnemoen
2020-07-17 20:21 ` Cédric Le Goater
2020-07-17 20:52 ` Philippe Mathieu-Daudé
2020-07-17 20:57 ` Havard Skinnemoen
2020-07-20 7:58 ` Markus Armbruster
2020-07-15 7:42 ` Cédric Le Goater
2020-07-15 21:19 ` Havard Skinnemoen
2020-07-09 0:36 ` [PATCH v5 11/11] docs/system: Add Nuvoton machine documentation Havard Skinnemoen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200709003608.3834629-4-hskinnemoen@google.com \
--to=hskinnemoen@google.com \
--cc=Avi.Fishman@nuvoton.com \
--cc=f4bug@amsat.org \
--cc=joel@jms.id.au \
--cc=kfting@nuvoton.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).