qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
To: Havard Skinnemoen <hskinnemoen@google.com>, peter.maydell@linaro.org
Cc: kfting@nuvoton.com, qemu-arm@nongnu.org, qemu-devel@nongnu.org,
	Avi.Fishman@nuvoton.com
Subject: Re: [PATCH v5 06/11] hw/arm: Load -bios image as a boot ROM for npcm7xx
Date: Mon, 13 Jul 2020 19:50:08 +0200	[thread overview]
Message-ID: <f88fae50-cb96-f5db-4820-24667bd8dacc@amsat.org> (raw)
In-Reply-To: <20200709003608.3834629-7-hskinnemoen@google.com>

On 7/9/20 2:36 AM, Havard Skinnemoen wrote:
> If a -bios option is specified on the command line, load the image into
> the internal ROM memory region, which contains the first instructions
> run by the CPU after reset.
> 
> A minimal Apache-2.0-licensed boot ROM can be found at
> 
> https://github.com/google/vbootrom
> 
> It is by no means feature complete, but it is enough to launch the
> Nuvoton bootblock[1] from offset 0 in the flash, which in turn will
> launch u-boot and finally the Linux kernel.

Peter, should we include it as submodule with the compiled blob in
pc-bios/?

> 
> [1] https://github.com/Nuvoton-Israel/bootblock
> 
> Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
> ---
>  hw/arm/npcm7xx_boards.c | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c
> index d78d9f991b..80cf1535f1 100644
> --- a/hw/arm/npcm7xx_boards.c
> +++ b/hw/arm/npcm7xx_boards.c
> @@ -19,8 +19,11 @@
>  #include "hw/arm/boot.h"
>  #include "hw/arm/npcm7xx.h"
>  #include "hw/core/cpu.h"
> +#include "hw/loader.h"
>  #include "qapi/error.h"
> +#include "qemu-common.h"
>  #include "qemu/units.h"
> +#include "sysemu/sysemu.h"
>  
>  #define NPCM750_EVB_POWER_ON_STRAPS 0x00001ff7
>  #define QUANTA_GSJ_POWER_ON_STRAPS 0x00001fff
> @@ -34,6 +37,25 @@ static struct arm_boot_info npcm7xx_binfo = {
>      .board_id           = -1,
>  };
>  
> +static void npcm7xx_load_bootrom(NPCM7xxState *soc)
> +{
> +    if (bios_name) {
> +        g_autofree char *filename = NULL;
> +        int ret;
> +
> +        filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
> +        if (!filename) {
> +            error_report("Could not find ROM image '%s'", bios_name);
> +            exit(1);
> +        }
> +        ret = load_image_mr(filename, &soc->irom);
> +        if (ret < 0) {
> +            error_report("Failed to load ROM image '%s'", filename);
> +            exit(1);
> +        }
> +    }
> +}
> +
>  static void npcm7xx_load_kernel(MachineState *machine, NPCM7xxState *soc)
>  {
>      NPCM7xxClass *sc = NPCM7XX_GET_CLASS(soc);
> @@ -73,6 +95,7 @@ static void npcm750_evb_init(MachineState *machine)
>      npcm7xx_connect_dram(soc, machine->ram);
>      qdev_realize(DEVICE(soc), NULL, &error_abort);
>  
> +    npcm7xx_load_bootrom(soc);
>      npcm7xx_load_kernel(machine, soc);
>  }
>  
> @@ -84,6 +107,7 @@ static void quanta_gsj_init(MachineState *machine)
>      npcm7xx_connect_dram(soc, machine->ram);
>      qdev_realize(DEVICE(soc), NULL, &error_abort);
>  
> +    npcm7xx_load_bootrom(soc);
>      npcm7xx_load_kernel(machine, soc);
>  }
>  
> 


  reply	other threads:[~2020-07-13 17:51 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-09  0:35 [PATCH v5 00/11] Add Nuvoton NPCM730/NPCM750 SoCs and two BMC machines Havard Skinnemoen
2020-07-09  0:35 ` [PATCH v5 01/11] hw/misc: Add NPCM7xx System Global Control Registers device model Havard Skinnemoen
2020-07-09  6:04   ` Philippe Mathieu-Daudé
2020-07-09  6:43     ` Havard Skinnemoen
2020-07-09 16:23       ` Philippe Mathieu-Daudé
2020-07-09 17:09         ` Havard Skinnemoen
2020-07-09 17:24           ` Philippe Mathieu-Daudé
2020-07-09 17:42             ` Havard Skinnemoen
2020-07-10  9:31               ` Philippe Mathieu-Daudé
2020-07-11  6:46                 ` Havard Skinnemoen
2020-07-12  5:49                   ` Havard Skinnemoen
2020-07-09  0:35 ` [PATCH v5 02/11] hw/misc: Add NPCM7xx Clock Controller " Havard Skinnemoen
2020-07-15  7:18   ` Philippe Mathieu-Daudé
2020-07-09  0:36 ` [PATCH v5 03/11] hw/timer: Add NPCM7xx Timer " Havard Skinnemoen
2020-07-15  7:25   ` Philippe Mathieu-Daudé
2020-07-15 23:04     ` Havard Skinnemoen
2020-07-16  8:04       ` Philippe Mathieu-Daudé
2020-07-09  0:36 ` [PATCH v5 04/11] hw/arm: Add NPCM730 and NPCM750 SoC models Havard Skinnemoen
2020-07-09  6:11   ` Philippe Mathieu-Daudé
2020-07-13 15:02   ` Cédric Le Goater
2020-07-14  0:44     ` Havard Skinnemoen
2020-07-14 11:37       ` Philippe Mathieu-Daudé
2020-07-14 16:01         ` Markus Armbruster
2020-07-14 17:11           ` Philippe Mathieu-Daudé
2020-07-15  1:03             ` Havard Skinnemoen
2020-07-15  9:35               ` Markus Armbruster
2020-07-09  0:36 ` [PATCH v5 05/11] hw/arm: Add two NPCM7xx-based machines Havard Skinnemoen
2020-07-09  5:57   ` Philippe Mathieu-Daudé
2020-07-09  6:09     ` Philippe Mathieu-Daudé
2020-07-09  0:36 ` [PATCH v5 06/11] hw/arm: Load -bios image as a boot ROM for npcm7xx Havard Skinnemoen
2020-07-13 17:50   ` Philippe Mathieu-Daudé [this message]
2020-07-09  0:36 ` [PATCH v5 07/11] hw/nvram: NPCM7xx OTP device model Havard Skinnemoen
2020-07-09  0:36 ` [PATCH v5 08/11] hw/mem: Stubbed out NPCM7xx Memory Controller model Havard Skinnemoen
2020-07-09 16:29   ` Philippe Mathieu-Daudé
2020-07-09  0:36 ` [PATCH v5 09/11] hw/ssi: NPCM7xx Flash Interface Unit device model Havard Skinnemoen
2020-07-09 17:00   ` Philippe Mathieu-Daudé
2020-07-12  5:42     ` Havard Skinnemoen
2020-07-13 17:38       ` Philippe Mathieu-Daudé
2020-07-14  2:39         ` Havard Skinnemoen
2020-07-09  0:36 ` [PATCH v5 10/11] hw/arm: Wire up BMC boot flash for npcm750-evb and quanta-gsj Havard Skinnemoen
2020-07-13 14:57   ` Cédric Le Goater
2020-07-13 17:59     ` Philippe Mathieu-Daudé
2020-07-13 18:02       ` Philippe Mathieu-Daudé
2020-07-14  2:56     ` Havard Skinnemoen
2020-07-14  9:16       ` Markus Armbruster
2020-07-14 11:29         ` Philippe Mathieu-Daudé
2020-07-14 16:21           ` Markus Armbruster
2020-07-14 17:16             ` Philippe Mathieu-Daudé
2020-07-15  9:00               ` Markus Armbruster
2020-07-15 10:57                 ` Philippe Mathieu-Daudé
2020-07-15 20:54                   ` Havard Skinnemoen
2020-07-16 20:56                     ` Havard Skinnemoen
2020-07-17  7:48                       ` Philippe Mathieu-Daudé
2020-07-17  8:03                         ` Thomas Huth
2020-07-17  8:27                           ` Philippe Mathieu-Daudé
2020-07-17  9:00                             ` Philippe Mathieu-Daudé
2020-07-17 19:18                               ` Havard Skinnemoen
2020-07-17 20:21                                 ` Cédric Le Goater
2020-07-17 20:52                                 ` Philippe Mathieu-Daudé
2020-07-17 20:57                                   ` Havard Skinnemoen
2020-07-20  7:58                               ` Markus Armbruster
2020-07-15  7:42       ` Cédric Le Goater
2020-07-15 21:19         ` Havard Skinnemoen
2020-07-09  0:36 ` [PATCH v5 11/11] docs/system: Add Nuvoton machine documentation Havard Skinnemoen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f88fae50-cb96-f5db-4820-24667bd8dacc@amsat.org \
    --to=f4bug@amsat.org \
    --cc=Avi.Fishman@nuvoton.com \
    --cc=hskinnemoen@google.com \
    --cc=kfting@nuvoton.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).