qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Klaus Jensen <its@irrelevant.dk>
To: Keith Busch <kbusch@kernel.org>
Cc: "Kevin Wolf" <kwolf@redhat.com>,
	"Niklas Cassel" <Niklas.Cassel@wdc.com>,
	qemu-block@nongnu.org, "Klaus Jensen" <k.jensen@samsung.com>,
	qemu-devel@nongnu.org,
	"Philippe Mathieu-Daudé" <philmd@redhat.com>
Subject: Re: [PATCH 1/9] hw/block/nvme: remove pointless rw indirection
Date: Thu, 1 Oct 2020 20:34:01 +0200	[thread overview]
Message-ID: <20201001183401.GC792691@apples.localdomain> (raw)
In-Reply-To: <20201001040508.GA681387@apples.localdomain>

[-- Attachment #1: Type: text/plain, Size: 6283 bytes --]

On Oct  1 06:05, Klaus Jensen wrote:
> On Sep 30 15:04, Keith Busch wrote:
> > The code switches on the opcode to invoke a function specific to that
> > opcode. There's no point in consolidating back to a common function that
> > just switches on that same opcode without any actual common code.
> > Restore the opcode specific behavior without going back through another
> > level of switches.
> > 
> > Signed-off-by: Keith Busch <kbusch@kernel.org>
> 
> Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
> 
> Point taken. I could've sweared I had a better reason for this.
> 
> > ---
> >  hw/block/nvme.c | 91 ++++++++++++++++---------------------------------
> >  1 file changed, 29 insertions(+), 62 deletions(-)
> > 
> > diff --git a/hw/block/nvme.c b/hw/block/nvme.c
> > index da8344f196..db52ea0db9 100644
> > --- a/hw/block/nvme.c
> > +++ b/hw/block/nvme.c
> > @@ -927,68 +927,12 @@ static void nvme_rw_cb(void *opaque, int ret)
> >      nvme_enqueue_req_completion(nvme_cq(req), req);
> >  }
> >  
> > -static uint16_t nvme_do_aio(BlockBackend *blk, int64_t offset, size_t len,
> > -                            NvmeRequest *req)
> > -{
> > -    BlockAcctCookie *acct = &req->acct;
> > -    BlockAcctStats *stats = blk_get_stats(blk);
> > -
> > -    bool is_write = false;
> > -
> > -    trace_pci_nvme_do_aio(nvme_cid(req), req->cmd.opcode,
> > -                          nvme_io_opc_str(req->cmd.opcode), blk_name(blk),
> > -                          offset, len);
> > -
> > -    switch (req->cmd.opcode) {
> > -    case NVME_CMD_FLUSH:
> > -        block_acct_start(stats, acct, 0, BLOCK_ACCT_FLUSH);
> > -        req->aiocb = blk_aio_flush(blk, nvme_rw_cb, req);
> > -        break;
> > -
> > -    case NVME_CMD_WRITE_ZEROES:
> > -        block_acct_start(stats, acct, len, BLOCK_ACCT_WRITE);
> > -        req->aiocb = blk_aio_pwrite_zeroes(blk, offset, len,
> > -                                           BDRV_REQ_MAY_UNMAP, nvme_rw_cb,
> > -                                           req);
> > -        break;
> > -
> > -    case NVME_CMD_WRITE:
> > -        is_write = true;
> > -
> > -        /* fallthrough */
> > -
> > -    case NVME_CMD_READ:
> > -        block_acct_start(stats, acct, len,
> > -                         is_write ? BLOCK_ACCT_WRITE : BLOCK_ACCT_READ);
> > -
> > -        if (req->qsg.sg) {
> > -            if (is_write) {
> > -                req->aiocb = dma_blk_write(blk, &req->qsg, offset,
> > -                                           BDRV_SECTOR_SIZE, nvme_rw_cb, req);
> > -            } else {
> > -                req->aiocb = dma_blk_read(blk, &req->qsg, offset,
> > -                                          BDRV_SECTOR_SIZE, nvme_rw_cb, req);
> > -            }
> > -        } else {
> > -            if (is_write) {
> > -                req->aiocb = blk_aio_pwritev(blk, offset, &req->iov, 0,
> > -                                             nvme_rw_cb, req);
> > -            } else {
> > -                req->aiocb = blk_aio_preadv(blk, offset, &req->iov, 0,
> > -                                            nvme_rw_cb, req);
> > -            }
> > -        }
> > -
> > -        break;
> > -    }
> > -
> > -    return NVME_NO_COMPLETE;
> > -}
> > -
> >  static uint16_t nvme_flush(NvmeCtrl *n, NvmeRequest *req)
> >  {
> > -    NvmeNamespace *ns = req->ns;
> > -    return nvme_do_aio(ns->blkconf.blk, 0, 0, req);
> > +    block_acct_start(blk_get_stats(n->conf.blk), &req->acct, 0,

Uh, ouch!

This and the rest needs to be changed to ns->blkconf.blk and not
n->conf.blk.

> > +                     BLOCK_ACCT_FLUSH);
> > +    req->aiocb = blk_aio_flush(n->conf.blk, nvme_rw_cb, req);
> > +    return NVME_NO_COMPLETE;
> >  }
> >  
> >  static uint16_t nvme_write_zeroes(NvmeCtrl *n, NvmeRequest *req)
> > @@ -1009,7 +953,11 @@ static uint16_t nvme_write_zeroes(NvmeCtrl *n, NvmeRequest *req)
> >          return status;
> >      }
> >  
> > -    return nvme_do_aio(ns->blkconf.blk, offset, count, req);
> > +    block_acct_start(blk_get_stats(n->conf.blk), &req->acct, 0,
> > +                     BLOCK_ACCT_WRITE);
> > +    req->aiocb = blk_aio_pwrite_zeroes(n->conf.blk, offset, count,
> > +                                       BDRV_REQ_MAY_UNMAP, nvme_rw_cb, req);
> > +    return NVME_NO_COMPLETE;
> >  }
> >  
> >  static uint16_t nvme_rw(NvmeCtrl *n, NvmeRequest *req)
> > @@ -1023,6 +971,7 @@ static uint16_t nvme_rw(NvmeCtrl *n, NvmeRequest *req)
> >      uint64_t data_offset = nvme_l2b(ns, slba);
> >      enum BlockAcctType acct = req->cmd.opcode == NVME_CMD_WRITE ?
> >          BLOCK_ACCT_WRITE : BLOCK_ACCT_READ;
> > +    BlockBackend *blk = ns->blkconf.blk;
> >      uint16_t status;
> >  
> >      trace_pci_nvme_rw(nvme_cid(req), nvme_io_opc_str(rw->opcode),
> > @@ -1045,7 +994,25 @@ static uint16_t nvme_rw(NvmeCtrl *n, NvmeRequest *req)
> >          goto invalid;
> >      }
> >  
> > -    return nvme_do_aio(ns->blkconf.blk, data_offset, data_size, req);
> > +    block_acct_start(blk_get_stats(blk), &req->acct, data_size, acct);
> > +    if (req->qsg.sg) {
> > +        if (acct == BLOCK_ACCT_WRITE) {
> > +            req->aiocb = dma_blk_write(blk, &req->qsg, data_offset,
> > +                                       BDRV_SECTOR_SIZE, nvme_rw_cb, req);
> > +        } else {
> > +            req->aiocb = dma_blk_read(blk, &req->qsg, data_offset,
> > +                                      BDRV_SECTOR_SIZE, nvme_rw_cb, req);
> > +        }
> > +    } else {
> > +        if (acct == BLOCK_ACCT_WRITE) {
> > +            req->aiocb = blk_aio_pwritev(blk, data_offset, &req->iov, 0,
> > +                                         nvme_rw_cb, req);
> > +        } else {
> > +            req->aiocb = blk_aio_preadv(blk, data_offset, &req->iov, 0,
> > +                                        nvme_rw_cb, req);
> > +        }
> > +    }
> > +    return NVME_NO_COMPLETE;
> >  
> >  invalid:
> >      block_acct_invalid(blk_get_stats(ns->blkconf.blk), acct);
> > -- 
> > 2.24.1
> > 
> > 
> 
> -- 
> One of us - No more doubt, silence or taboo about mental illness.



-- 
One of us - No more doubt, silence or taboo about mental illness.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

  parent reply	other threads:[~2020-10-01 18:39 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-30 22:04 [PATCH 0/9] nvme qemu cleanups and fixes Keith Busch
2020-09-30 22:04 ` [PATCH 1/9] hw/block/nvme: remove pointless rw indirection Keith Busch
2020-10-01  4:05   ` Klaus Jensen
2020-10-01  8:48     ` Klaus Jensen
2020-10-01 15:24       ` Keith Busch
2020-10-01 18:34     ` Klaus Jensen [this message]
2020-10-06  1:49   ` Dmitry Fomichev
2020-09-30 22:04 ` [PATCH 2/9] hw/block/nvme: fix log page offset check Keith Busch
2020-09-30 23:18   ` Dmitry Fomichev
2020-10-01  4:05   ` Klaus Jensen
2020-10-01 10:11   ` Philippe Mathieu-Daudé
2020-09-30 22:04 ` [PATCH 3/9] hw/block/nvme: support per-namespace smart log Keith Busch
2020-10-01  4:10   ` Klaus Jensen
2020-10-01 15:20     ` Keith Busch
2020-10-01 17:18       ` Klaus Jensen
2020-10-01 17:30         ` Keith Busch
2020-10-01 17:34           ` Klaus Jensen
2020-10-02  8:48   ` Klaus Jensen
2020-10-06  1:57   ` Dmitry Fomichev
2020-09-30 22:04 ` [PATCH 4/9] hw/block/nvme: validate command set selected Keith Busch
2020-10-01  4:14   ` Klaus Jensen
2020-09-30 22:04 ` [PATCH 5/9] hw/block/nvme: support for admin-only command set Keith Busch
2020-10-01  0:11   ` Dmitry Fomichev
2020-10-01  4:17   ` Klaus Jensen
2020-09-30 22:04 ` [PATCH 6/9] hw/block/nvme: reject io commands if only admin command set selected Keith Busch
2020-09-30 23:11   ` Dmitry Fomichev
2020-09-30 22:04 ` [PATCH 7/9] hw/block/nvme: add nsid to get/setfeat trace events Keith Busch
2020-09-30 22:04 ` [PATCH 8/9] hw/block/nvme: add trace event for requests with non-zero status code Keith Busch
2020-09-30 23:21   ` Dmitry Fomichev
2020-10-01 15:25   ` Philippe Mathieu-Daudé
2020-09-30 22:04 ` [PATCH 9/9] hw/block/nvme: report actual LBA data shift in LBAF Keith Busch
2020-10-01  9:48   ` Klaus Jensen
2020-10-01 18:46 ` [PATCH 0/9] nvme qemu cleanups and fixes Klaus Jensen
2020-10-13  9:04 ` Klaus Jensen
2020-10-13 17:48   ` Keith Busch
2020-10-13 18:36     ` Klaus Jensen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201001183401.GC792691@apples.localdomain \
    --to=its@irrelevant.dk \
    --cc=Niklas.Cassel@wdc.com \
    --cc=k.jensen@samsung.com \
    --cc=kbusch@kernel.org \
    --cc=kwolf@redhat.com \
    --cc=philmd@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).