QEMU-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
To: qemu-devel@nongnu.org
Cc: "Aleksandar Rikalo" <aleksandar.rikalo@syrmia.com>,
	"Paul Burton" <paulburton@kernel.org>,
	"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
	"Hervé Poussineau" <hpoussin@reactos.org>,
	"Huacai Chen" <chenhc@lemote.com>,
	"Aurelien Jarno" <aurelien@aurel32.net>
Subject: [PULL 09/44] target/mips: Add loongson-ext lswc2 group of instructions (Part 2)
Date: Sat, 17 Oct 2020 16:02:08 +0200
Message-ID: <20201017140243.1078718-10-f4bug@amsat.org> (raw)
In-Reply-To: <20201017140243.1078718-1-f4bug@amsat.org>

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

LWC2 & SWC2 have been rewritten by Loongson EXT vendor ASE
as "load/store quad word" and "shifted load/store" groups of
instructions.

This patch add implementation of these instructions:

  gslwlc1: similar to lwl but RT is FPR instead of GPR
  gslwrc1: similar to lwr but RT is FPR instead of GPR
  gsldlc1: similar to ldl but RT is FPR instead of GPR
  gsldrc1: similar to ldr but RT is FPR instead of GPR
  gsswlc1: similar to swl but RT is FPR instead of GPR
  gsswrc1: similar to swr but RT is FPR instead of GPR
  gssdlc1: similar to sdl but RT is FPR instead of GPR
  gssdrc1: similar to sdr but RT is FPR instead of GPR

Details of Loongson-EXT is here:
https://github.com/FlyGoat/loongson-insn/blob/master/loongson-ext.md

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <1602831120-3377-4-git-send-email-chenhc@lemote.com>
[PMD: Reuse t1 on MIPS32, reintroduce t2/fp0]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 target/mips/translate.c | 182 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 180 insertions(+), 2 deletions(-)

diff --git a/target/mips/translate.c b/target/mips/translate.c
index e83954d782f..b335645e03b 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -471,6 +471,19 @@ enum {
     OPC_GSSHFS      = OPC_SWC2,
 };
 
+/* Loongson EXT shifted load/store opcodes */
+#define MASK_LOONGSON_GSSHFLS(op)         (MASK_OP_MAJOR(op) | (op & 0xc03f))
+enum {
+    OPC_GSLWLC1     = 0x4 | OPC_GSSHFL,
+    OPC_GSLWRC1     = 0x5 | OPC_GSSHFL,
+    OPC_GSLDLC1     = 0x6 | OPC_GSSHFL,
+    OPC_GSLDRC1     = 0x7 | OPC_GSSHFL,
+    OPC_GSSWLC1     = 0x4 | OPC_GSSHFS,
+    OPC_GSSWRC1     = 0x5 | OPC_GSSHFS,
+    OPC_GSSDLC1     = 0x6 | OPC_GSSHFS,
+    OPC_GSSDRC1     = 0x7 | OPC_GSSHFS,
+};
+
 /* BSHFL opcodes */
 #define MASK_BSHFL(op)              (MASK_SPECIAL3(op) | (op & (0x1F << 6)))
 
@@ -5924,12 +5937,13 @@ no_rd:
 static void gen_loongson_lswc2(DisasContext *ctx, int rt,
                                int rs, int rd)
 {
-    TCGv t0;
+    TCGv t0, t1, t2;
+    TCGv_i32 fp0;
 #if defined(TARGET_MIPS64)
-    TCGv t1;
     int lsq_rt1 = ctx->opcode & 0x1f;
     int lsq_offset = sextract32(ctx->opcode, 6, 9) << 4;
 #endif
+    int shf_offset = sextract32(ctx->opcode, 6, 8);
 
     t0 = tcg_temp_new();
 
@@ -5986,6 +6000,170 @@ static void gen_loongson_lswc2(DisasContext *ctx, int rt,
         tcg_temp_free(t1);
         break;
 #endif
+    case OPC_GSSHFL:
+        switch (MASK_LOONGSON_GSSHFLS(ctx->opcode)) {
+        case OPC_GSLWLC1:
+            check_cp1_enabled(ctx);
+            gen_base_offset_addr(ctx, t0, rs, shf_offset);
+            t1 = tcg_temp_new();
+            tcg_gen_qemu_ld_tl(t1, t0, ctx->mem_idx, MO_UB);
+            tcg_gen_andi_tl(t1, t0, 3);
+#ifndef TARGET_WORDS_BIGENDIAN
+            tcg_gen_xori_tl(t1, t1, 3);
+#endif
+            tcg_gen_shli_tl(t1, t1, 3);
+            tcg_gen_andi_tl(t0, t0, ~3);
+            tcg_gen_qemu_ld_tl(t0, t0, ctx->mem_idx, MO_TEUL);
+            tcg_gen_shl_tl(t0, t0, t1);
+            t2 = tcg_const_tl(-1);
+            tcg_gen_shl_tl(t2, t2, t1);
+            fp0 = tcg_temp_new_i32();
+            gen_load_fpr32(ctx, fp0, rt);
+            tcg_gen_ext_i32_tl(t1, fp0);
+            tcg_gen_andc_tl(t1, t1, t2);
+            tcg_temp_free(t2);
+            tcg_gen_or_tl(t0, t0, t1);
+            tcg_temp_free(t1);
+#if defined(TARGET_MIPS64)
+            tcg_gen_extrl_i64_i32(fp0, t0);
+#else
+            tcg_gen_ext32s_tl(fp0, t0);
+#endif
+            gen_store_fpr32(ctx, fp0, rt);
+            tcg_temp_free_i32(fp0);
+            break;
+        case OPC_GSLWRC1:
+            check_cp1_enabled(ctx);
+            gen_base_offset_addr(ctx, t0, rs, shf_offset);
+            t1 = tcg_temp_new();
+            tcg_gen_qemu_ld_tl(t1, t0, ctx->mem_idx, MO_UB);
+            tcg_gen_andi_tl(t1, t0, 3);
+#ifdef TARGET_WORDS_BIGENDIAN
+            tcg_gen_xori_tl(t1, t1, 3);
+#endif
+            tcg_gen_shli_tl(t1, t1, 3);
+            tcg_gen_andi_tl(t0, t0, ~3);
+            tcg_gen_qemu_ld_tl(t0, t0, ctx->mem_idx, MO_TEUL);
+            tcg_gen_shr_tl(t0, t0, t1);
+            tcg_gen_xori_tl(t1, t1, 31);
+            t2 = tcg_const_tl(0xfffffffeull);
+            tcg_gen_shl_tl(t2, t2, t1);
+            fp0 = tcg_temp_new_i32();
+            gen_load_fpr32(ctx, fp0, rt);
+            tcg_gen_ext_i32_tl(t1, fp0);
+            tcg_gen_and_tl(t1, t1, t2);
+            tcg_temp_free(t2);
+            tcg_gen_or_tl(t0, t0, t1);
+            tcg_temp_free(t1);
+#if defined(TARGET_MIPS64)
+            tcg_gen_extrl_i64_i32(fp0, t0);
+#else
+            tcg_gen_ext32s_tl(fp0, t0);
+#endif
+            gen_store_fpr32(ctx, fp0, rt);
+            tcg_temp_free_i32(fp0);
+            break;
+#if defined(TARGET_MIPS64)
+        case OPC_GSLDLC1:
+            check_cp1_enabled(ctx);
+            gen_base_offset_addr(ctx, t0, rs, shf_offset);
+            t1 = tcg_temp_new();
+            tcg_gen_qemu_ld_tl(t1, t0, ctx->mem_idx, MO_UB);
+            tcg_gen_andi_tl(t1, t0, 7);
+#ifndef TARGET_WORDS_BIGENDIAN
+            tcg_gen_xori_tl(t1, t1, 7);
+#endif
+            tcg_gen_shli_tl(t1, t1, 3);
+            tcg_gen_andi_tl(t0, t0, ~7);
+            tcg_gen_qemu_ld_tl(t0, t0, ctx->mem_idx, MO_TEQ);
+            tcg_gen_shl_tl(t0, t0, t1);
+            t2 = tcg_const_tl(-1);
+            tcg_gen_shl_tl(t2, t2, t1);
+            gen_load_fpr64(ctx, t1, rt);
+            tcg_gen_andc_tl(t1, t1, t2);
+            tcg_temp_free(t2);
+            tcg_gen_or_tl(t0, t0, t1);
+            tcg_temp_free(t1);
+            gen_store_fpr64(ctx, t0, rt);
+            break;
+        case OPC_GSLDRC1:
+            check_cp1_enabled(ctx);
+            gen_base_offset_addr(ctx, t0, rs, shf_offset);
+            t1 = tcg_temp_new();
+            tcg_gen_qemu_ld_tl(t1, t0, ctx->mem_idx, MO_UB);
+            tcg_gen_andi_tl(t1, t0, 7);
+#ifdef TARGET_WORDS_BIGENDIAN
+            tcg_gen_xori_tl(t1, t1, 7);
+#endif
+            tcg_gen_shli_tl(t1, t1, 3);
+            tcg_gen_andi_tl(t0, t0, ~7);
+            tcg_gen_qemu_ld_tl(t0, t0, ctx->mem_idx, MO_TEQ);
+            tcg_gen_shr_tl(t0, t0, t1);
+            tcg_gen_xori_tl(t1, t1, 63);
+            t2 = tcg_const_tl(0xfffffffffffffffeull);
+            tcg_gen_shl_tl(t2, t2, t1);
+            gen_load_fpr64(ctx, t1, rt);
+            tcg_gen_and_tl(t1, t1, t2);
+            tcg_temp_free(t2);
+            tcg_gen_or_tl(t0, t0, t1);
+            tcg_temp_free(t1);
+            gen_store_fpr64(ctx, t0, rt);
+            break;
+#endif
+        default:
+            MIPS_INVAL("loongson_gsshfl");
+            generate_exception_end(ctx, EXCP_RI);
+            break;
+        }
+        break;
+    case OPC_GSSHFS:
+        switch (MASK_LOONGSON_GSSHFLS(ctx->opcode)) {
+        case OPC_GSSWLC1:
+            check_cp1_enabled(ctx);
+            t1 = tcg_temp_new();
+            gen_base_offset_addr(ctx, t0, rs, shf_offset);
+            fp0 = tcg_temp_new_i32();
+            gen_load_fpr32(ctx, fp0, rt);
+            tcg_gen_ext_i32_tl(t1, fp0);
+            gen_helper_0e2i(swl, t1, t0, ctx->mem_idx);
+            tcg_temp_free_i32(fp0);
+            tcg_temp_free(t1);
+            break;
+        case OPC_GSSWRC1:
+            check_cp1_enabled(ctx);
+            t1 = tcg_temp_new();
+            gen_base_offset_addr(ctx, t0, rs, shf_offset);
+            fp0 = tcg_temp_new_i32();
+            gen_load_fpr32(ctx, fp0, rt);
+            tcg_gen_ext_i32_tl(t1, fp0);
+            gen_helper_0e2i(swr, t1, t0, ctx->mem_idx);
+            tcg_temp_free_i32(fp0);
+            tcg_temp_free(t1);
+            break;
+#if defined(TARGET_MIPS64)
+        case OPC_GSSDLC1:
+            check_cp1_enabled(ctx);
+            t1 = tcg_temp_new();
+            gen_base_offset_addr(ctx, t0, rs, shf_offset);
+            gen_load_fpr64(ctx, t1, rt);
+            gen_helper_0e2i(sdl, t1, t0, ctx->mem_idx);
+            tcg_temp_free(t1);
+            break;
+        case OPC_GSSDRC1:
+            check_cp1_enabled(ctx);
+            t1 = tcg_temp_new();
+            gen_base_offset_addr(ctx, t0, rs, shf_offset);
+            gen_load_fpr64(ctx, t1, rt);
+            gen_helper_0e2i(sdr, t1, t0, ctx->mem_idx);
+            tcg_temp_free(t1);
+            break;
+#endif
+        default:
+            MIPS_INVAL("loongson_gsshfs");
+            generate_exception_end(ctx, EXCP_RI);
+            break;
+        }
+        break;
     default:
         MIPS_INVAL("loongson_gslsq");
         generate_exception_end(ctx, EXCP_RI);
-- 
2.26.2



  parent reply index

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-17 14:01 [PULL 00/44] mips-next patches for 2020-10-17 Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 01/44] util/cutils: Introduce freq_to_str() to display Hertz units Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 02/44] hw/qdev-clock: Display error hint when clock is missing from device Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 03/44] hw/core/clock: Add the clock_new helper function Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 04/44] target/mips: Fix some comment spelling errors Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 05/44] target/mips: Demacro helpers for <ABS|CHS>.<D|S|PS> Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 06/44] target/mips: Demacro helpers for M<ADD|SUB>F.<D|S> Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 07/44] target/mips: Demacro helpers for <MAX|MAXA|MIN|MINA>.<D|S> Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 08/44] target/mips: Add loongson-ext lswc2 group of instructions (Part 1) Philippe Mathieu-Daudé
2020-10-17 14:02 ` Philippe Mathieu-Daudé [this message]
2020-10-17 14:02 ` [PULL 10/44] target/mips: Add loongson-ext lsdc2 group of instructions Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 11/44] target/mips/op_helper: Convert multiple if() to switch case Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 12/44] target/mips/op_helper: Document Invalidate/Writeback opcodes as no-op Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 13/44] target/mips/op_helper: Log unimplemented cache opcode Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 14/44] target/mips: Move cpu_mips_get_random() with CP0 helpers Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 15/44] target/mips/cp0_timer: Explicit unit in variable name Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 16/44] target/mips/cp0_timer: Document TIMER_PERIOD origin Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 17/44] target/mips: Move cp0_count_ns to CPUMIPSState Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 18/44] target/mips/cpu: Calculate the CP0 timer period using the CPU frequency Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 19/44] target/mips/cpu: Make cp0_count_rate a property Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 20/44] target/mips/cpu: Allow the CPU to use dynamic frequencies Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 21/44] target/mips/cpu: Introduce mips_cpu_create_with_clock() helper Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 22/44] hw/mips/r4k: Explicit CPU frequency is 200 MHz Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 23/44] hw/mips/fuloong2e: Set CPU frequency to 533 MHz Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 24/44] hw/mips/mipssim: Correct CPU frequency Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 25/44] hw/mips/jazz: Correct CPU frequencies Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 26/44] hw/mips/cps: Expose input clock and connect it to CPU cores Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 27/44] hw/mips/boston: Set CPU frequency to 1 GHz Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 28/44] hw/mips/malta: Set CPU frequency to 320 MHz Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 29/44] hw/mips/cps: Do not allow use without input clock Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 30/44] target/mips/cpu: Display warning when CPU is used " Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 31/44] hw/mips/malta: Fix FPGA I/O region size Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 32/44] hw/mips/malta: Move gt64120 related code together Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 33/44] hw/mips/malta: Use clearer qdev style Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 34/44] hw/mips: Simplify loading 64-bit ELF kernels Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 35/44] hw/mips: Simplify code using ROUND_UP(INITRD_PAGE_SIZE) Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 36/44] hw/mips: Rename TYPE_MIPS_BOSTON to TYPE_BOSTON Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 37/44] hw/mips: Remove exit(1) in case of missing ROM Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 38/44] tests/acceptance: Add MIPS record/replay tests Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 39/44] docs/system: Update MIPS CPU documentation Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 40/44] MAINTAINERS: Remove myself Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 41/44] MAINTAINERS: Put myself forward for MIPS target Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 42/44] MAINTAINERS: Downgrade MIPS Boston to 'Odd Fixes', fix Paul Burton mail Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 43/44] MAINTAINERS: Remove duplicated Malta test entries Philippe Mathieu-Daudé
2020-10-17 14:02 ` [PULL 44/44] target/mips: Increase number of TLB entries on the 34Kf core (16 -> 64) Philippe Mathieu-Daudé
2020-10-19 10:45 ` [PULL 00/44] mips-next patches for 2020-10-17 Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201017140243.1078718-10-f4bug@amsat.org \
    --to=f4bug@amsat.org \
    --cc=aleksandar.rikalo@syrmia.com \
    --cc=aurelien@aurel32.net \
    --cc=chenhc@lemote.com \
    --cc=hpoussin@reactos.org \
    --cc=paulburton@kernel.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

QEMU-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/qemu-devel/0 qemu-devel/git/0.git
	git clone --mirror https://lore.kernel.org/qemu-devel/1 qemu-devel/git/1.git
	git clone --mirror https://lore.kernel.org/qemu-devel/2 qemu-devel/git/2.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 qemu-devel qemu-devel/ https://lore.kernel.org/qemu-devel \
		qemu-devel@nongnu.org
	public-inbox-index qemu-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.nongnu.qemu-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git