* [PATCH v3 1/8] hw/sh4: Add missing license
2021-02-21 21:59 [PATCH v3 0/8] hw/sh4: Kconfig cleanups Philippe Mathieu-Daudé
@ 2021-02-21 21:59 ` Philippe Mathieu-Daudé
2021-02-22 13:55 ` Peter Maydell
2021-02-21 21:59 ` [PATCH v3 2/8] hw/sh4: Add missing Kconfig dependency on SH7750 for the R2D board Philippe Mathieu-Daudé
` (6 subsequent siblings)
7 siblings, 1 reply; 13+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-02-21 21:59 UTC (permalink / raw)
To: qemu-devel
Cc: Kevin Wolf, Peter Maydell, qemu-block, Yoshinori Sato,
Magnus Damm, Philippe Mathieu-Daudé,
Max Reitz, Samuel Tardieu, Marc-André Lureau, Paolo Bonzini,
Alex Bennée
This code was introduced in commit 27c7ca7e775,
("SHIX board emulation (Samuel Tardieu)"). Use
the same license.
Cc: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
include/hw/sh4/sh.h | 12 +++++++++---
hw/block/tc58128.c | 7 +++++++
2 files changed, 16 insertions(+), 3 deletions(-)
diff --git a/include/hw/sh4/sh.h b/include/hw/sh4/sh.h
index 93f464bf4cd..33dde7a56dd 100644
--- a/include/hw/sh4/sh.h
+++ b/include/hw/sh4/sh.h
@@ -1,6 +1,12 @@
-#ifndef QEMU_SH_H
-#define QEMU_SH_H
-/* Definitions for SH board emulation. */
+/*
+ * Definitions for SH board emulation
+ *
+ * Copyright (c) 2005 Samuel Tardieu
+ *
+ * SPDX-License-Identifier: MIT
+ */
+#ifndef QEMU_HW_SH_H
+#define QEMU_HW_SH_H
#include "hw/sh4/sh_intc.h"
#include "target/sh4/cpu-qom.h"
diff --git a/hw/block/tc58128.c b/hw/block/tc58128.c
index 9888f01ac60..1a0fa86d8ea 100644
--- a/hw/block/tc58128.c
+++ b/hw/block/tc58128.c
@@ -1,3 +1,10 @@
+/*
+ * TC58128 NAND EEPROM emulation
+ *
+ * Copyright (c) 2005 Samuel Tardieu
+ *
+ * SPDX-License-Identifier: MIT
+ */
#include "qemu/osdep.h"
#include "qemu/units.h"
#include "hw/sh4/sh.h"
--
2.26.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH v3 1/8] hw/sh4: Add missing license
2021-02-21 21:59 ` [PATCH v3 1/8] hw/sh4: Add missing license Philippe Mathieu-Daudé
@ 2021-02-22 13:55 ` Peter Maydell
2021-02-22 14:13 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 13+ messages in thread
From: Peter Maydell @ 2021-02-22 13:55 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Kevin Wolf, Qemu-block, Yoshinori Sato, Magnus Damm,
QEMU Developers, Max Reitz, Samuel Tardieu,
Marc-André Lureau, Paolo Bonzini, Alex Bennée
On Sun, 21 Feb 2021 at 21:59, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>
> This code was introduced in commit 27c7ca7e775,
> ("SHIX board emulation (Samuel Tardieu)"). Use
> the same license.
>
> Cc: Samuel Tardieu <sam@rfc1149.net>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> include/hw/sh4/sh.h | 12 +++++++++---
> hw/block/tc58128.c | 7 +++++++
> 2 files changed, 16 insertions(+), 3 deletions(-)
>
> diff --git a/include/hw/sh4/sh.h b/include/hw/sh4/sh.h
> index 93f464bf4cd..33dde7a56dd 100644
> --- a/include/hw/sh4/sh.h
> +++ b/include/hw/sh4/sh.h
> @@ -1,6 +1,12 @@
> -#ifndef QEMU_SH_H
> -#define QEMU_SH_H
> -/* Definitions for SH board emulation. */
> +/*
> + * Definitions for SH board emulation
> + *
> + * Copyright (c) 2005 Samuel Tardieu
> + *
> + * SPDX-License-Identifier: MIT
> + */
I thought it wasn't generally recommended to convert
a license text to a single SPDX line? The sh7750.c file
has a full 3-para license text.
thanks
-- PMM
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v3 1/8] hw/sh4: Add missing license
2021-02-22 13:55 ` Peter Maydell
@ 2021-02-22 14:13 ` Philippe Mathieu-Daudé
2021-02-22 14:19 ` Peter Maydell
0 siblings, 1 reply; 13+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-02-22 14:13 UTC (permalink / raw)
To: Peter Maydell
Cc: Kevin Wolf, Qemu-block, Yoshinori Sato, Magnus Damm,
QEMU Developers, Max Reitz, Samuel Tardieu, Paolo Bonzini,
Marc-André Lureau, Alex Bennée
On 2/22/21 2:55 PM, Peter Maydell wrote:
> On Sun, 21 Feb 2021 at 21:59, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>>
>> This code was introduced in commit 27c7ca7e775,
>> ("SHIX board emulation (Samuel Tardieu)"). Use
>> the same license.
>>
>> Cc: Samuel Tardieu <sam@rfc1149.net>
>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>> ---
>> include/hw/sh4/sh.h | 12 +++++++++---
>> hw/block/tc58128.c | 7 +++++++
>> 2 files changed, 16 insertions(+), 3 deletions(-)
>>
>> diff --git a/include/hw/sh4/sh.h b/include/hw/sh4/sh.h
>> index 93f464bf4cd..33dde7a56dd 100644
>> --- a/include/hw/sh4/sh.h
>> +++ b/include/hw/sh4/sh.h
>> @@ -1,6 +1,12 @@
>> -#ifndef QEMU_SH_H
>> -#define QEMU_SH_H
>> -/* Definitions for SH board emulation. */
>> +/*
>> + * Definitions for SH board emulation
>> + *
>> + * Copyright (c) 2005 Samuel Tardieu
>> + *
>> + * SPDX-License-Identifier: MIT
>> + */
>
> I thought it wasn't generally recommended to convert
> a license text to a single SPDX line? The sh7750.c file
> has a full 3-para license text.
Yes you are right, sorry. I'll respin.
Phil.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v3 1/8] hw/sh4: Add missing license
2021-02-22 14:13 ` Philippe Mathieu-Daudé
@ 2021-02-22 14:19 ` Peter Maydell
0 siblings, 0 replies; 13+ messages in thread
From: Peter Maydell @ 2021-02-22 14:19 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Kevin Wolf, Qemu-block, Yoshinori Sato, Magnus Damm,
QEMU Developers, Max Reitz, Samuel Tardieu, Paolo Bonzini,
Marc-André Lureau, Alex Bennée
On Mon, 22 Feb 2021 at 14:13, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>
> On 2/22/21 2:55 PM, Peter Maydell wrote:
> > On Sun, 21 Feb 2021 at 21:59, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
> >>
> >> This code was introduced in commit 27c7ca7e775,
> >> ("SHIX board emulation (Samuel Tardieu)"). Use
> >> the same license.
> > I thought it wasn't generally recommended to convert
> > a license text to a single SPDX line? The sh7750.c file
> > has a full 3-para license text.
>
> Yes you are right, sorry. I'll respin.
Also on the subject of sh4 code licenses, hw/sh4/sh7750_regs.h
has
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.com/license/LICENSE.
because it's borrowed from RTEMS.
(The license at the URL is gpl-2-or-later with a header exception).
Maybe we should expand the license in-place so we're not dependent
on a 3rd party website to stay up to tell us what the license
on the file is? In particular I assume the comment really
means "the file LICENSE in the rtems distribution"
https://git.rtems.org/rtems/tree/LICENSE (same text as web page)
and not the file LICENSE in QEMU, which is not the same thing,
so that part is actively misleading.
-- PMM
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v3 2/8] hw/sh4: Add missing Kconfig dependency on SH7750 for the R2D board
2021-02-21 21:59 [PATCH v3 0/8] hw/sh4: Kconfig cleanups Philippe Mathieu-Daudé
2021-02-21 21:59 ` [PATCH v3 1/8] hw/sh4: Add missing license Philippe Mathieu-Daudé
@ 2021-02-21 21:59 ` Philippe Mathieu-Daudé
2021-02-21 21:59 ` [PATCH v3 3/8] hw/intc: Introduce SH_INTC Kconfig entry Philippe Mathieu-Daudé
` (5 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-02-21 21:59 UTC (permalink / raw)
To: qemu-devel
Cc: Kevin Wolf, Peter Maydell, qemu-block, Yoshinori Sato,
Magnus Damm, Philippe Mathieu-Daudé,
Max Reitz, Marc-André Lureau, Paolo Bonzini,
Alex Bennée
r2d_init() calls sh7750_init() so depends on SH7750.Harmless
at the moment because nothing actually uses CONFIG_SH7750
(hw/sh4/meson.build always compiles sh7750.c and sh7750_regnames.c
unconditionally).
Fixes: 7ab58d4c841 ("sh4-softmmu.mak: express dependencies with Kconfig")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
hw/sh4/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/hw/sh4/Kconfig b/hw/sh4/Kconfig
index 4cbce3a0ed5..0452b4624ae 100644
--- a/hw/sh4/Kconfig
+++ b/hw/sh4/Kconfig
@@ -10,6 +10,7 @@ config R2D
select PCI
select SM501
select SH4
+ select SH7750
config SHIX
bool
--
2.26.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v3 3/8] hw/intc: Introduce SH_INTC Kconfig entry
2021-02-21 21:59 [PATCH v3 0/8] hw/sh4: Kconfig cleanups Philippe Mathieu-Daudé
2021-02-21 21:59 ` [PATCH v3 1/8] hw/sh4: Add missing license Philippe Mathieu-Daudé
2021-02-21 21:59 ` [PATCH v3 2/8] hw/sh4: Add missing Kconfig dependency on SH7750 for the R2D board Philippe Mathieu-Daudé
@ 2021-02-21 21:59 ` Philippe Mathieu-Daudé
2021-02-21 21:59 ` [PATCH v3 4/8] hw/char: Introduce SH_SCI " Philippe Mathieu-Daudé
` (4 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-02-21 21:59 UTC (permalink / raw)
To: qemu-devel
Cc: Kevin Wolf, Peter Maydell, qemu-block, Yoshinori Sato,
Magnus Damm, Philippe Mathieu-Daudé,
Max Reitz, Marc-André Lureau, Paolo Bonzini,
Alex Bennée
We want to be able to use the 'SH4' config for architecture
specific features. Add more fine-grained selection by adding
a CONFIG_SH_INTC selector for the SH4 interrupt controller.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
hw/intc/Kconfig | 3 +++
hw/intc/meson.build | 2 +-
hw/sh4/Kconfig | 1 +
3 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig
index c18d11142a8..66bf0b90b47 100644
--- a/hw/intc/Kconfig
+++ b/hw/intc/Kconfig
@@ -53,6 +53,9 @@ config OMPIC
config PPC_UIC
bool
+config SH_INTC
+ bool
+
config RX_ICU
bool
diff --git a/hw/intc/meson.build b/hw/intc/meson.build
index 53cba115690..b3d9345a0d2 100644
--- a/hw/intc/meson.build
+++ b/hw/intc/meson.build
@@ -47,7 +47,7 @@
specific_ss.add(when: 'CONFIG_RX_ICU', if_true: files('rx_icu.c'))
specific_ss.add(when: 'CONFIG_S390_FLIC', if_true: files('s390_flic.c'))
specific_ss.add(when: 'CONFIG_S390_FLIC_KVM', if_true: files('s390_flic_kvm.c'))
-specific_ss.add(when: 'CONFIG_SH4', if_true: files('sh_intc.c'))
+specific_ss.add(when: 'CONFIG_SH_INTC', if_true: files('sh_intc.c'))
specific_ss.add(when: 'CONFIG_SIFIVE_CLINT', if_true: files('sifive_clint.c'))
specific_ss.add(when: 'CONFIG_SIFIVE_PLIC', if_true: files('sifive_plic.c'))
specific_ss.add(when: 'CONFIG_XICS', if_true: files('xics.c'))
diff --git a/hw/sh4/Kconfig b/hw/sh4/Kconfig
index 0452b4624ae..c2008c6a0d2 100644
--- a/hw/sh4/Kconfig
+++ b/hw/sh4/Kconfig
@@ -19,6 +19,7 @@ config SHIX
config SH7750
bool
+ select SH_INTC
config SH4
bool
--
2.26.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v3 4/8] hw/char: Introduce SH_SCI Kconfig entry
2021-02-21 21:59 [PATCH v3 0/8] hw/sh4: Kconfig cleanups Philippe Mathieu-Daudé
` (2 preceding siblings ...)
2021-02-21 21:59 ` [PATCH v3 3/8] hw/intc: Introduce SH_INTC Kconfig entry Philippe Mathieu-Daudé
@ 2021-02-21 21:59 ` Philippe Mathieu-Daudé
2021-02-21 21:59 ` [PATCH v3 5/8] hw/timer: Introduce SH_TIMER " Philippe Mathieu-Daudé
` (3 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-02-21 21:59 UTC (permalink / raw)
To: qemu-devel
Cc: Kevin Wolf, Peter Maydell, qemu-block, Yoshinori Sato,
Magnus Damm, Philippe Mathieu-Daudé,
Max Reitz, Marc-André Lureau, Paolo Bonzini,
Alex Bennée
We want to be able to use the 'SH4' config for architecture
specific features. Add more fine-grained selection by adding
a CONFIG_SH_SCI selector for the SH4 serial controller.
Add the missing MAINTAINERS entries.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
MAINTAINERS | 2 ++
hw/char/Kconfig | 3 +++
hw/char/meson.build | 2 +-
hw/sh4/Kconfig | 1 +
4 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 9b2aa18e1fe..b53a937714a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1388,6 +1388,7 @@ R2D
M: Yoshinori Sato <ysato@users.sourceforge.jp>
R: Magnus Damm <magnus.damm@gmail.com>
S: Odd Fixes
+F: hw/char/sh_serial.c
F: hw/sh4/r2d.c
F: hw/intc/sh_intc.c
F: include/hw/sh4/sh_intc.h
@@ -1396,6 +1397,7 @@ Shix
M: Yoshinori Sato <ysato@users.sourceforge.jp>
R: Magnus Damm <magnus.damm@gmail.com>
S: Odd Fixes
+F: hw/char/sh_serial.c
F: hw/sh4/shix.c
F: hw/intc/sh_intc.c
F: include/hw/sh4/sh_intc.h
diff --git a/hw/char/Kconfig b/hw/char/Kconfig
index 939bc447588..f6f4fffd1b7 100644
--- a/hw/char/Kconfig
+++ b/hw/char/Kconfig
@@ -50,6 +50,9 @@ config SCLPCONSOLE
config TERMINAL3270
bool
+config SH_SCI
+ bool
+
config RENESAS_SCI
bool
diff --git a/hw/char/meson.build b/hw/char/meson.build
index 196ac91fa29..afe9a0af88c 100644
--- a/hw/char/meson.build
+++ b/hw/char/meson.build
@@ -31,7 +31,7 @@
softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_aux.c'))
softmmu_ss.add(when: 'CONFIG_RENESAS_SCI', if_true: files('renesas_sci.c'))
softmmu_ss.add(when: 'CONFIG_SIFIVE_UART', if_true: files('sifive_uart.c'))
-softmmu_ss.add(when: 'CONFIG_SH4', if_true: files('sh_serial.c'))
+softmmu_ss.add(when: 'CONFIG_SH_SCI', if_true: files('sh_serial.c'))
softmmu_ss.add(when: 'CONFIG_STM32F2XX_USART', if_true: files('stm32f2xx_usart.c'))
softmmu_ss.add(when: 'CONFIG_MCHP_PFSOC_MMUART', if_true: files('mchp_pfsoc_mmuart.c'))
diff --git a/hw/sh4/Kconfig b/hw/sh4/Kconfig
index c2008c6a0d2..47240aa97b7 100644
--- a/hw/sh4/Kconfig
+++ b/hw/sh4/Kconfig
@@ -20,6 +20,7 @@ config SHIX
config SH7750
bool
select SH_INTC
+ select SH_SCI
config SH4
bool
--
2.26.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v3 5/8] hw/timer: Introduce SH_TIMER Kconfig entry
2021-02-21 21:59 [PATCH v3 0/8] hw/sh4: Kconfig cleanups Philippe Mathieu-Daudé
` (3 preceding siblings ...)
2021-02-21 21:59 ` [PATCH v3 4/8] hw/char: Introduce SH_SCI " Philippe Mathieu-Daudé
@ 2021-02-21 21:59 ` Philippe Mathieu-Daudé
2021-02-21 21:59 ` [PATCH v3 6/8] hw/block: Introduce TC58128 eeprom " Philippe Mathieu-Daudé
` (2 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-02-21 21:59 UTC (permalink / raw)
To: qemu-devel
Cc: Kevin Wolf, Peter Maydell, qemu-block, Yoshinori Sato,
Magnus Damm, Philippe Mathieu-Daudé,
Max Reitz, Marc-André Lureau, Paolo Bonzini,
Alex Bennée
We want to be able to use the 'SH4' config for architecture
specific features. Add more fine-grained selection by adding
a CONFIG_SH_TIMER selector for the SH4 timer control unit.
Add the missing MAINTAINERS entries.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
MAINTAINERS | 2 ++
hw/sh4/Kconfig | 2 +-
hw/timer/Kconfig | 4 ++++
hw/timer/meson.build | 2 +-
4 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index b53a937714a..a03557f4f7c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1391,6 +1391,7 @@ S: Odd Fixes
F: hw/char/sh_serial.c
F: hw/sh4/r2d.c
F: hw/intc/sh_intc.c
+F: hw/timer/sh_timer.c
F: include/hw/sh4/sh_intc.h
Shix
@@ -1400,6 +1401,7 @@ S: Odd Fixes
F: hw/char/sh_serial.c
F: hw/sh4/shix.c
F: hw/intc/sh_intc.c
+F: hw/timer/sh_timer.c
F: include/hw/sh4/sh_intc.h
SPARC Machines
diff --git a/hw/sh4/Kconfig b/hw/sh4/Kconfig
index 47240aa97b7..e569470a614 100644
--- a/hw/sh4/Kconfig
+++ b/hw/sh4/Kconfig
@@ -21,7 +21,7 @@ config SH7750
bool
select SH_INTC
select SH_SCI
+ select SH_TIMER
config SH4
bool
- select PTIMER
diff --git a/hw/timer/Kconfig b/hw/timer/Kconfig
index 8749edfb6a5..18936ef55bf 100644
--- a/hw/timer/Kconfig
+++ b/hw/timer/Kconfig
@@ -36,6 +36,10 @@ config CMSDK_APB_DUALTIMER
bool
select PTIMER
+config SH_TIMER
+ bool
+ select PTIMER
+
config RENESAS_TMR
bool
diff --git a/hw/timer/meson.build b/hw/timer/meson.build
index be343f68fed..26c2701fd78 100644
--- a/hw/timer/meson.build
+++ b/hw/timer/meson.build
@@ -30,7 +30,7 @@
softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_ost.c'))
softmmu_ss.add(when: 'CONFIG_PXA2XX', if_true: files('pxa2xx_timer.c'))
softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_systmr.c'))
-softmmu_ss.add(when: 'CONFIG_SH4', if_true: files('sh_timer.c'))
+softmmu_ss.add(when: 'CONFIG_SH_TIMER', if_true: files('sh_timer.c'))
softmmu_ss.add(when: 'CONFIG_SLAVIO', if_true: files('slavio_timer.c'))
softmmu_ss.add(when: 'CONFIG_STM32F2XX_TIMER', if_true: files('stm32f2xx_timer.c'))
softmmu_ss.add(when: 'CONFIG_XILINX', if_true: files('xilinx_timer.c'))
--
2.26.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v3 6/8] hw/block: Introduce TC58128 eeprom Kconfig entry
2021-02-21 21:59 [PATCH v3 0/8] hw/sh4: Kconfig cleanups Philippe Mathieu-Daudé
` (4 preceding siblings ...)
2021-02-21 21:59 ` [PATCH v3 5/8] hw/timer: Introduce SH_TIMER " Philippe Mathieu-Daudé
@ 2021-02-21 21:59 ` Philippe Mathieu-Daudé
2021-02-21 21:59 ` [PATCH v3 7/8] hw/pci-host: Introduce SH_PCI " Philippe Mathieu-Daudé
2021-02-21 21:59 ` [PATCH v3 8/8] hw/sh4: Remove now unused CONFIG_SH4 from Kconfig Philippe Mathieu-Daudé
7 siblings, 0 replies; 13+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-02-21 21:59 UTC (permalink / raw)
To: qemu-devel
Cc: Kevin Wolf, Peter Maydell, qemu-block, Yoshinori Sato,
Magnus Damm, Philippe Mathieu-Daudé,
Max Reitz, Marc-André Lureau, Paolo Bonzini,
Alex Bennée
Add more fine-grained selection by adding a CONFIG_TC58128
selector for the TC58128 eeprom.
As this device is only used by the Shix machine, add an entry
to the proper section in MAINTAINERS.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
MAINTAINERS | 1 +
hw/block/Kconfig | 3 +++
hw/block/meson.build | 2 +-
hw/sh4/Kconfig | 1 +
4 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index a03557f4f7c..a0cb89161cb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1398,6 +1398,7 @@ Shix
M: Yoshinori Sato <ysato@users.sourceforge.jp>
R: Magnus Damm <magnus.damm@gmail.com>
S: Odd Fixes
+F: hw/block/tc58128.c
F: hw/char/sh_serial.c
F: hw/sh4/shix.c
F: hw/intc/sh_intc.c
diff --git a/hw/block/Kconfig b/hw/block/Kconfig
index 2d17f481adc..4fcd1521668 100644
--- a/hw/block/Kconfig
+++ b/hw/block/Kconfig
@@ -22,6 +22,9 @@ config ECC
config ONENAND
bool
+config TC58128
+ bool
+
config NVME_PCI
bool
default y if PCI_DEVICES
diff --git a/hw/block/meson.build b/hw/block/meson.build
index 602ca6c8541..4bf994c64ff 100644
--- a/hw/block/meson.build
+++ b/hw/block/meson.build
@@ -12,7 +12,7 @@
softmmu_ss.add(when: 'CONFIG_SSI_M25P80', if_true: files('m25p80.c'))
softmmu_ss.add(when: 'CONFIG_SWIM', if_true: files('swim.c'))
softmmu_ss.add(when: 'CONFIG_XEN', if_true: files('xen-block.c'))
-softmmu_ss.add(when: 'CONFIG_SH4', if_true: files('tc58128.c'))
+softmmu_ss.add(when: 'CONFIG_TC58128', if_true: files('tc58128.c'))
softmmu_ss.add(when: 'CONFIG_NVME_PCI', if_true: files('nvme.c', 'nvme-ns.c'))
specific_ss.add(when: 'CONFIG_VIRTIO_BLK', if_true: files('virtio-blk.c'))
diff --git a/hw/sh4/Kconfig b/hw/sh4/Kconfig
index e569470a614..34c01dadde9 100644
--- a/hw/sh4/Kconfig
+++ b/hw/sh4/Kconfig
@@ -16,6 +16,7 @@ config SHIX
bool
select SH7750
select SH4
+ select TC58128
config SH7750
bool
--
2.26.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v3 7/8] hw/pci-host: Introduce SH_PCI Kconfig entry
2021-02-21 21:59 [PATCH v3 0/8] hw/sh4: Kconfig cleanups Philippe Mathieu-Daudé
` (5 preceding siblings ...)
2021-02-21 21:59 ` [PATCH v3 6/8] hw/block: Introduce TC58128 eeprom " Philippe Mathieu-Daudé
@ 2021-02-21 21:59 ` Philippe Mathieu-Daudé
2021-02-22 13:49 ` Peter Maydell
2021-02-21 21:59 ` [PATCH v3 8/8] hw/sh4: Remove now unused CONFIG_SH4 from Kconfig Philippe Mathieu-Daudé
7 siblings, 1 reply; 13+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-02-21 21:59 UTC (permalink / raw)
To: qemu-devel
Cc: Kevin Wolf, Peter Maydell, qemu-block, Yoshinori Sato,
Magnus Damm, Philippe Mathieu-Daudé,
Max Reitz, Marc-André Lureau, Paolo Bonzini,
Alex Bennée
We want to be able to use the 'SH4' config for architecture
specific features. Add more fine-grained selection by adding
a CONFIG_SH_PCI selector for the SH4 PCI controller.
Move the file with the other PCI host devices in hw/pci-host
and add its missing MAINTAINERS entries.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
hw/{sh4 => pci-host}/sh_pci.c | 0
MAINTAINERS | 1 +
hw/pci-host/Kconfig | 4 ++++
hw/pci-host/meson.build | 1 +
hw/sh4/Kconfig | 1 +
hw/sh4/meson.build | 1 -
6 files changed, 7 insertions(+), 1 deletion(-)
rename hw/{sh4 => pci-host}/sh_pci.c (100%)
diff --git a/hw/sh4/sh_pci.c b/hw/pci-host/sh_pci.c
similarity index 100%
rename from hw/sh4/sh_pci.c
rename to hw/pci-host/sh_pci.c
diff --git a/MAINTAINERS b/MAINTAINERS
index a0cb89161cb..e39997f129a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1391,6 +1391,7 @@ S: Odd Fixes
F: hw/char/sh_serial.c
F: hw/sh4/r2d.c
F: hw/intc/sh_intc.c
+F: hw/pci-host/sh_pci.c
F: hw/timer/sh_timer.c
F: include/hw/sh4/sh_intc.h
diff --git a/hw/pci-host/Kconfig b/hw/pci-host/Kconfig
index 8b8c763c28c..2ccc96f02ce 100644
--- a/hw/pci-host/Kconfig
+++ b/hw/pci-host/Kconfig
@@ -68,3 +68,7 @@ config PCI_POWERNV
config REMOTE_PCIHOST
bool
+
+config SH_PCI
+ bool
+ select PCI
diff --git a/hw/pci-host/meson.build b/hw/pci-host/meson.build
index 1847c69905c..87a896973e7 100644
--- a/hw/pci-host/meson.build
+++ b/hw/pci-host/meson.build
@@ -10,6 +10,7 @@
pci_ss.add(when: 'CONFIG_PCI_SABRE', if_true: files('sabre.c'))
pci_ss.add(when: 'CONFIG_XEN_IGD_PASSTHROUGH', if_true: files('xen_igd_pt.c'))
pci_ss.add(when: 'CONFIG_REMOTE_PCIHOST', if_true: files('remote.c'))
+pci_ss.add(when: 'CONFIG_SH_PCI', if_true: files('sh_pci.c'))
# PPC devices
pci_ss.add(when: 'CONFIG_PREP_PCI', if_true: files('prep.c'))
diff --git a/hw/sh4/Kconfig b/hw/sh4/Kconfig
index 34c01dadde9..b9f0538d57f 100644
--- a/hw/sh4/Kconfig
+++ b/hw/sh4/Kconfig
@@ -11,6 +11,7 @@ config R2D
select SM501
select SH4
select SH7750
+ select SH_PCI
config SHIX
bool
diff --git a/hw/sh4/meson.build b/hw/sh4/meson.build
index 303c0f42879..424d5674dea 100644
--- a/hw/sh4/meson.build
+++ b/hw/sh4/meson.build
@@ -2,7 +2,6 @@
sh4_ss.add(files(
'sh7750.c',
'sh7750_regnames.c',
- 'sh_pci.c'
))
sh4_ss.add(when: 'CONFIG_R2D', if_true: files('r2d.c'))
sh4_ss.add(when: 'CONFIG_SHIX', if_true: files('shix.c'))
--
2.26.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH v3 7/8] hw/pci-host: Introduce SH_PCI Kconfig entry
2021-02-21 21:59 ` [PATCH v3 7/8] hw/pci-host: Introduce SH_PCI " Philippe Mathieu-Daudé
@ 2021-02-22 13:49 ` Peter Maydell
0 siblings, 0 replies; 13+ messages in thread
From: Peter Maydell @ 2021-02-22 13:49 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Kevin Wolf, Qemu-block, Yoshinori Sato, Magnus Damm,
QEMU Developers, Max Reitz, Marc-André Lureau,
Paolo Bonzini, Alex Bennée
On Sun, 21 Feb 2021 at 21:59, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>
> We want to be able to use the 'SH4' config for architecture
> specific features. Add more fine-grained selection by adding
> a CONFIG_SH_PCI selector for the SH4 PCI controller.
> Move the file with the other PCI host devices in hw/pci-host
> and add its missing MAINTAINERS entries.
>
> Suggested-by: Peter Maydell <peter.maydell@linaro.org>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> hw/{sh4 => pci-host}/sh_pci.c | 0
> MAINTAINERS | 1 +
> hw/pci-host/Kconfig | 4 ++++
> hw/pci-host/meson.build | 1 +
> hw/sh4/Kconfig | 1 +
> hw/sh4/meson.build | 1 -
> 6 files changed, 7 insertions(+), 1 deletion(-)
> rename hw/{sh4 => pci-host}/sh_pci.c (100%)
>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
thanks
-- PMM
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v3 8/8] hw/sh4: Remove now unused CONFIG_SH4 from Kconfig
2021-02-21 21:59 [PATCH v3 0/8] hw/sh4: Kconfig cleanups Philippe Mathieu-Daudé
` (6 preceding siblings ...)
2021-02-21 21:59 ` [PATCH v3 7/8] hw/pci-host: Introduce SH_PCI " Philippe Mathieu-Daudé
@ 2021-02-21 21:59 ` Philippe Mathieu-Daudé
7 siblings, 0 replies; 13+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-02-21 21:59 UTC (permalink / raw)
To: qemu-devel
Cc: Kevin Wolf, Peter Maydell, qemu-block, Yoshinori Sato,
Magnus Damm, Philippe Mathieu-Daudé,
Max Reitz, Marc-André Lureau, Paolo Bonzini,
Alex Bennée
As replaced the generic CONFIG_SH4 by more fine-grained
selectors, we can remove this now unused config variable.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
hw/sh4/Kconfig | 5 -----
1 file changed, 5 deletions(-)
diff --git a/hw/sh4/Kconfig b/hw/sh4/Kconfig
index b9f0538d57f..ab733a3f760 100644
--- a/hw/sh4/Kconfig
+++ b/hw/sh4/Kconfig
@@ -9,14 +9,12 @@ config R2D
select USB_OHCI_PCI
select PCI
select SM501
- select SH4
select SH7750
select SH_PCI
config SHIX
bool
select SH7750
- select SH4
select TC58128
config SH7750
@@ -24,6 +22,3 @@ config SH7750
select SH_INTC
select SH_SCI
select SH_TIMER
-
-config SH4
- bool
--
2.26.2
^ permalink raw reply related [flat|nested] 13+ messages in thread