[RFC PATCH 16/17] hw/sd: Support boot area in emmc image

["Cédric Le Goater" <clg@kaod.org>]

From: Joel Stanley <joel@jms.id.au>

This assumes a specially constructued image:

  dd if=/dev/zero of=mmc-bootarea.img count=2 bs=1M
  dd if=u-boot-spl.bin of=mmc-bootarea.img conv=notrunc
  dd if=u-boot.bin of=mmc-bootarea.img conv=notrunc count=64 bs=1K
  cat mmc-bootarea.img obmc-phosphor-image.wic > mmc.img
  truncate --size 16GB mmc.img
  truncate --size 128MB mmc-bootarea.img

For now this still requires a mtd image to load the SPL:

  qemu-system-arm -M tacoma-bmc -nographic \
   -global driver=sd-card,property=emmc,value=true \
   -drive file=mmc.img,if=sd,index=2 \
   -drive file=mmc-bootarea.img,if=mtd,format=raw

Signed-off-by: Joel Stanley <joel@jms.id.au>
[clg: - changes on the definition names ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 include/hw/sd/sd.h |  1 +
 hw/sd/sd.c         | 33 +++++++++++++++++++++++++++++++++
 2 files changed, 34 insertions(+)

diff --git a/include/hw/sd/sd.h b/include/hw/sd/sd.h
index dfe661079b8a..02cfc8cecfac 100644
--- a/include/hw/sd/sd.h
+++ b/include/hw/sd/sd.h
@@ -133,6 +133,7 @@ struct SDCardClass {
     const struct SDProto *proto;
     uint8_t spec_version;
     void (*set_csd)(SDState *sd, uint64_t size);
+    uint32_t (*bootpart_offset)(SDState *sd);
 };
 
 #define TYPE_SD_BUS "sd-bus"
diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index d3bda6c2aa6b..e975fcf18512 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -839,9 +839,40 @@ void sd_set_cb(SDState *sd, qemu_irq readonly, qemu_irq insert)
     qemu_set_irq(insert, sd->blk ? blk_is_inserted(sd->blk) : 0);
 }
 
+/*
+ * This requires a disk image that has two boot partitions inserted at the
+ * beginning of it. The size of the boot partitions are configured in the
+ * ext_csd structure, which is hardcoded in qemu. They are currently set to
+ * 1MB each.
+ */
+static uint32_t sd_emmc_bootpart_offset(SDState *sd)
+{
+    unsigned int access = sd->ext_csd[EXT_CSD_PART_CONFIG] &
+        EXT_CSD_PART_CONFIG_ACC_MASK;
+    unsigned int boot_capacity = sd->ext_csd[EXT_CSD_BOOT_MULT] << 17;
+
+    switch (access) {
+    case EXT_CSD_PART_CONFIG_ACC_DEFAULT:
+        return boot_capacity * 2;
+    case EXT_CSD_PART_CONFIG_ACC_BOOT0:
+        return 0;
+    case EXT_CSD_PART_CONFIG_ACC_BOOT0 + 1:
+        return boot_capacity * 1;
+    default:
+         g_assert_not_reached();
+    }
+}
+
+static uint32_t sd_bootpart_offset(SDState *sd)
+{
+    SDCardClass *sc = SD_CARD_GET_CLASS(sd);
+    return sc->bootpart_offset ? sc->bootpart_offset(sd) : 0;
+}
+
 static void sd_blk_read(SDState *sd, uint64_t addr, uint32_t len)
 {
     trace_sdcard_read_block(addr, len);
+    addr += sd_bootpart_offset(sd);
     if (!sd->blk || blk_pread(sd->blk, addr, sd->data, len) < 0) {
         fprintf(stderr, "sd_blk_read: read error on host side\n");
     }
@@ -850,6 +881,7 @@ static void sd_blk_read(SDState *sd, uint64_t addr, uint32_t len)
 static void sd_blk_write(SDState *sd, uint64_t addr, uint32_t len)
 {
     trace_sdcard_write_block(addr, len);
+    addr += sd_bootpart_offset(sd);
     if (!sd->blk || blk_pwrite(sd->blk, addr, sd->data, len, 0) < 0) {
         fprintf(stderr, "sd_blk_write: write error on host side\n");
     }
@@ -2546,6 +2578,7 @@ static void emmc_class_init(ObjectClass *klass, void *data)
     sc->proto = &sd_proto_emmc;
     sc->spec_version = SD_PHY_SPECv3_01_VERS; /* eMMC requirement */
     sc->set_csd = sd_emmc_set_csd;
+    sc->bootpart_offset = sd_emmc_bootpart_offset;
 }
 
 static const TypeInfo emmc_info = {
-- 
2.34.1