From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: qemu-riscv@nongnu.org, alistair.francis@wdc.com,
palmer@dabbelt.com, zhiwei_liu@linux.alibaba.com,
fei2.wu@intel.com
Subject: [PATCH v6 16/25] target/riscv: Set MMU_2STAGE_BIT in riscv_cpu_mmu_index
Date: Sat, 25 Mar 2023 03:54:20 -0700 [thread overview]
Message-ID: <20230325105429.1142530-17-richard.henderson@linaro.org> (raw)
In-Reply-To: <20230325105429.1142530-1-richard.henderson@linaro.org>
Incorporate the virt_enabled and MPV checks into the cpu_mmu_index
function, so we don't have to keep doing it within tlb_fill and
subroutines. This also elides a flush on changes to MPV.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/riscv/cpu_helper.c | 50 +++++++++++++--------------------------
target/riscv/csr.c | 6 +----
2 files changed, 18 insertions(+), 38 deletions(-)
diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c
index 0adfd4a12b..6c42f9c6fd 100644
--- a/target/riscv/cpu_helper.c
+++ b/target/riscv/cpu_helper.c
@@ -37,19 +37,21 @@ int riscv_cpu_mmu_index(CPURISCVState *env, bool ifetch)
#ifdef CONFIG_USER_ONLY
return 0;
#else
- if (ifetch) {
- return env->priv;
- }
+ bool virt = riscv_cpu_virt_enabled(env);
+ int mode = env->priv;
/* All priv -> mmu_idx mapping are here */
- int mode = env->priv;
- if (mode == PRV_M && get_field(env->mstatus, MSTATUS_MPRV)) {
- mode = get_field(env->mstatus, MSTATUS_MPP);
+ if (!ifetch) {
+ if (mode == PRV_M && get_field(env->mstatus, MSTATUS_MPRV)) {
+ mode = get_field(env->mstatus, MSTATUS_MPP);
+ virt = get_field(env->mstatus, MSTATUS_MPV);
+ }
+ if (mode == PRV_S && get_field(env->mstatus, MSTATUS_SUM)) {
+ mode = MMUIdx_S_SUM;
+ }
}
- if (mode == PRV_S && get_field(env->mstatus, MSTATUS_SUM)) {
- return MMUIdx_S_SUM;
- }
- return mode;
+
+ return mode | (virt ? MMU_2STAGE_BIT : 0);
#endif
}
@@ -1165,8 +1167,7 @@ void riscv_cpu_do_transaction_failed(CPUState *cs, hwaddr physaddr,
}
env->badaddr = addr;
- env->two_stage_lookup = riscv_cpu_virt_enabled(env) ||
- mmuidx_2stage(mmu_idx);
+ env->two_stage_lookup = mmuidx_2stage(mmu_idx);
env->two_stage_indirect_lookup = false;
cpu_loop_exit_restore(cs, retaddr);
}
@@ -1191,8 +1192,7 @@ void riscv_cpu_do_unaligned_access(CPUState *cs, vaddr addr,
g_assert_not_reached();
}
env->badaddr = addr;
- env->two_stage_lookup = riscv_cpu_virt_enabled(env) ||
- mmuidx_2stage(mmu_idx);
+ env->two_stage_lookup = mmuidx_2stage(mmu_idx);
env->two_stage_indirect_lookup = false;
cpu_loop_exit_restore(cs, retaddr);
}
@@ -1230,7 +1230,7 @@ bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
int prot, prot2, prot_pmp;
bool pmp_violation = false;
bool first_stage_error = true;
- bool two_stage_lookup = false;
+ bool two_stage_lookup = mmuidx_2stage(mmu_idx);
bool two_stage_indirect_error = false;
int ret = TRANSLATE_FAIL;
int mode = mmu_idx;
@@ -1242,22 +1242,8 @@ bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
qemu_log_mask(CPU_LOG_MMU, "%s ad %" VADDR_PRIx " rw %d mmu_idx %d\n",
__func__, address, access_type, mmu_idx);
- /* MPRV does not affect the virtual-machine load/store
- instructions, HLV, HLVX, and HSV. */
- if (mmuidx_2stage(mmu_idx)) {
- ;
- } else if (mode == PRV_M && access_type != MMU_INST_FETCH &&
- get_field(env->mstatus, MSTATUS_MPRV)) {
- mode = get_field(env->mstatus, MSTATUS_MPP);
- if (riscv_has_ext(env, RVH) && get_field(env->mstatus, MSTATUS_MPV)) {
- two_stage_lookup = true;
- }
- }
-
pmu_tlb_fill_incr_ctr(cpu, access_type);
- if (riscv_cpu_virt_enabled(env) ||
- ((mmuidx_2stage(mmu_idx) || two_stage_lookup) &&
- access_type != MMU_INST_FETCH)) {
+ if (two_stage_lookup) {
/* Two stage lookup */
ret = get_physical_address(env, &pa, &prot, address,
&env->guest_phys_fault_addr, access_type,
@@ -1352,9 +1338,7 @@ bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
return false;
} else {
raise_mmu_exception(env, address, access_type, pmp_violation,
- first_stage_error,
- riscv_cpu_virt_enabled(env) ||
- mmuidx_2stage(mmu_idx),
+ first_stage_error, two_stage_lookup,
two_stage_indirect_error);
cpu_loop_exit_restore(cs, retaddr);
}
diff --git a/target/riscv/csr.c b/target/riscv/csr.c
index b79758a606..1b635373c6 100644
--- a/target/riscv/csr.c
+++ b/target/riscv/csr.c
@@ -1246,7 +1246,7 @@ static RISCVException write_mstatus(CPURISCVState *env, int csrno,
RISCVMXL xl = riscv_cpu_mxl(env);
/* flush tlb on mstatus fields that affect VM */
- if ((val ^ mstatus) & (MSTATUS_MXR | MSTATUS_MPV)) {
+ if ((val ^ mstatus) & MSTATUS_MXR) {
tlb_flush(env_cpu(env));
}
mask = MSTATUS_SIE | MSTATUS_SPIE | MSTATUS_MIE | MSTATUS_MPIE |
@@ -1294,10 +1294,6 @@ static RISCVException write_mstatush(CPURISCVState *env, int csrno,
uint64_t valh = (uint64_t)val << 32;
uint64_t mask = MSTATUS_MPV | MSTATUS_GVA;
- if ((valh ^ env->mstatus) & (MSTATUS_MPV)) {
- tlb_flush(env_cpu(env));
- }
-
env->mstatus = (env->mstatus & ~mask) | (valh & mask);
return RISCV_EXCP_NONE;
--
2.34.1
next prev parent reply other threads:[~2023-03-25 11:58 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-25 10:54 [PATCH v6 00/25] target/riscv: MSTATUS_SUM + cleanups Richard Henderson
2023-03-25 10:54 ` [PATCH v6 01/25] target/riscv: Extract virt enabled state from tb flags Richard Henderson
2023-04-06 2:35 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 02/25] target/riscv: Add a general status enum for extensions Richard Henderson
2023-03-26 12:54 ` liweiwei
2023-04-11 2:05 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 03/25] target/riscv: Encode the FS and VS on a normal way for tb flags Richard Henderson
2023-04-11 1:59 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 04/25] target/riscv: Remove mstatus_hs_{fs, vs} from tb_flags Richard Henderson
2023-03-27 1:34 ` liweiwei
2023-03-27 16:22 ` Richard Henderson
2023-03-28 2:34 ` [PATCH v6 04/25] target/riscv: Remove mstatus_hs_{fs,vs} " LIU Zhiwei
2023-04-11 2:02 ` [PATCH v6 04/25] target/riscv: Remove mstatus_hs_{fs, vs} " Alistair Francis
2023-03-25 10:54 ` [PATCH v6 05/25] target/riscv: Add a tb flags field for vstart Richard Henderson
2023-04-11 2:07 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 06/25] target/riscv: Separate priv from mmu_idx Richard Henderson
2023-03-28 2:39 ` LIU Zhiwei
2023-04-11 2:08 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 07/25] target/riscv: Reduce overhead of MSTATUS_SUM change Richard Henderson
2023-03-28 2:41 ` LIU Zhiwei
2023-04-11 2:11 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 08/25] accel/tcg: Add cpu_ld*_code_mmu Richard Henderson
2023-04-11 3:10 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 09/25] target/riscv: Use cpu_ld*_code_mmu for HLVX Richard Henderson
2023-04-11 3:12 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 10/25] target/riscv: Handle HLV, HSV via helpers Richard Henderson
2023-04-11 3:34 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 11/25] target/riscv: Rename MMU_HYP_ACCESS_BIT to MMU_2STAGE_BIT Richard Henderson
2023-04-11 3:36 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 12/25] target/riscv: Introduce mmuidx_sum Richard Henderson
2023-04-11 3:39 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 13/25] target/riscv: Introduce mmuidx_priv Richard Henderson
2023-03-27 2:07 ` LIU Zhiwei
2023-03-27 16:29 ` Richard Henderson
2023-03-28 1:33 ` LIU Zhiwei
2023-03-28 1:54 ` LIU Zhiwei
2023-03-28 14:27 ` Richard Henderson
2023-04-11 3:53 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 14/25] target/riscv: Introduce mmuidx_2stage Richard Henderson
2023-04-11 3:55 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 15/25] target/riscv: Move hstatus.spvp check to check_access_hlsv Richard Henderson
2023-04-11 3:56 ` Alistair Francis
2023-03-25 10:54 ` Richard Henderson [this message]
2023-04-11 4:02 ` [PATCH v6 16/25] target/riscv: Set MMU_2STAGE_BIT in riscv_cpu_mmu_index Alistair Francis
2023-03-25 10:54 ` [PATCH v6 17/25] target/riscv: Check SUM in the correct register Richard Henderson
2023-04-11 4:25 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 18/25] target/riscv: Hoist second stage mode change to callers Richard Henderson
2023-04-11 4:25 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 19/25] target/riscv: Hoist pbmte and hade out of the level loop Richard Henderson
2023-04-11 4:26 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 20/25] target/riscv: Move leaf pte processing out of " Richard Henderson
2023-04-11 4:30 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 21/25] target/riscv: Suppress pte update with is_debug Richard Henderson
2023-04-11 4:30 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 22/25] target/riscv: Don't modify SUM " Richard Henderson
2023-04-11 4:31 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 23/25] target/riscv: Merge checks for reserved pte flags Richard Henderson
2023-04-11 4:32 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 24/25] target/riscv: Reorg access check in get_physical_address Richard Henderson
2023-04-11 4:55 ` Alistair Francis
2023-03-25 10:54 ` [PATCH v6 25/25] target/riscv: Reorg sum " Richard Henderson
2023-04-11 5:36 ` Alistair Francis
2023-03-26 5:17 ` [PATCH v6 00/25] target/riscv: MSTATUS_SUM + cleanups Richard Henderson
2023-03-26 14:18 ` liweiwei
2023-03-27 16:43 ` Daniel Henrique Barboza
2023-03-28 1:22 ` Wu, Fei
2023-04-04 6:42 ` Wu, Fei
2023-04-04 7:11 ` LIU Zhiwei
2023-04-04 7:23 ` Wu, Fei
2023-04-11 5:38 ` Alistair Francis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230325105429.1142530-17-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=alistair.francis@wdc.com \
--cc=fei2.wu@intel.com \
--cc=palmer@dabbelt.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=zhiwei_liu@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).