qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
To: qemu-devel@nongnu.org
Cc: qemu-riscv@nongnu.org, alistair.francis@wdc.com,
	bmeng@tinylab.org, liweiwei@iscas.ac.cn,
	zhiwei_liu@linux.alibaba.com, palmer@rivosinc.com,
	Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Subject: [PATCH 01/19] target/riscv: sync env->misa_ext* with cpu->cfg in realize()
Date: Mon, 27 Mar 2023 09:42:29 -0300	[thread overview]
Message-ID: <20230327124247.106595-2-dbarboza@ventanamicro.com> (raw)
In-Reply-To: <20230327124247.106595-1-dbarboza@ventanamicro.com>

When riscv_cpu_realize() starts we're guaranteed to have cpu->cfg.ext_N
properties updated. The same can't be said about env->misa_ext*, since
the user might enable/disable MISA extensions in the command line, and
env->misa_ext* won't caught these changes. The current solution is to
sync everything at the end of validate_set_extensions(), checking every
cpu->cfg.ext_N value to do a set_misa() in the end.

The last change we're making in the MISA cfg flags are in the G
extension logic, enabling IMAFG if cpu->cfg_ext.g is enabled. Otherwise
we're not making any changes in MISA bits ever since realize() starts.

There's no reason to postpone misa_ext updates until the end of the
validation. Let's do it earlier, during realize(), in a new helper
called riscv_cpu_sync_misa_cfg(). If cpu->cfg.ext_g is enabled, do it
again by updating env->misa_ext* directly.

This is a pre-requisite to allow riscv_cpu_validate_set_extensions() to
use riscv_has_ext() instead of cpu->cfg.ext_N to validate the MISA
extensions, which is our end goal here.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
---
 target/riscv/cpu.c | 94 +++++++++++++++++++++++++++-------------------
 1 file changed, 56 insertions(+), 38 deletions(-)

diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 1e97473af2..2711d80e16 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -804,12 +804,11 @@ static void riscv_cpu_disas_set_info(CPUState *s, disassemble_info *info)
 
 /*
  * Check consistency between chosen extensions while setting
- * cpu->cfg accordingly, doing a set_misa() in the end.
+ * cpu->cfg accordingly.
  */
 static void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp)
 {
     CPURISCVState *env = &cpu->env;
-    uint32_t ext = 0;
 
     /* Do some ISA extension error checking */
     if (cpu->cfg.ext_g && !(cpu->cfg.ext_i && cpu->cfg.ext_m &&
@@ -824,6 +823,9 @@ static void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp)
         cpu->cfg.ext_d = true;
         cpu->cfg.ext_icsr = true;
         cpu->cfg.ext_ifencei = true;
+
+        env->misa_ext |= RVI | RVM | RVA | RVF | RVD;
+        env->misa_ext_mask = env->misa_ext;
     }
 
     if (cpu->cfg.ext_i && cpu->cfg.ext_e) {
@@ -962,39 +964,8 @@ static void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp)
         cpu->cfg.ext_zksh = true;
     }
 
-    if (cpu->cfg.ext_i) {
-        ext |= RVI;
-    }
-    if (cpu->cfg.ext_e) {
-        ext |= RVE;
-    }
-    if (cpu->cfg.ext_m) {
-        ext |= RVM;
-    }
-    if (cpu->cfg.ext_a) {
-        ext |= RVA;
-    }
-    if (cpu->cfg.ext_f) {
-        ext |= RVF;
-    }
-    if (cpu->cfg.ext_d) {
-        ext |= RVD;
-    }
-    if (cpu->cfg.ext_c) {
-        ext |= RVC;
-    }
-    if (cpu->cfg.ext_s) {
-        ext |= RVS;
-    }
-    if (cpu->cfg.ext_u) {
-        ext |= RVU;
-    }
-    if (cpu->cfg.ext_h) {
-        ext |= RVH;
-    }
     if (cpu->cfg.ext_v) {
         int vext_version = VEXT_VERSION_1_00_0;
-        ext |= RVV;
         if (!is_power_of_2(cpu->cfg.vlen)) {
             error_setg(errp,
                        "Vector extension VLEN must be power of 2");
@@ -1032,11 +1003,6 @@ static void riscv_cpu_validate_set_extensions(RISCVCPU *cpu, Error **errp)
         }
         set_vext_version(env, vext_version);
     }
-    if (cpu->cfg.ext_j) {
-        ext |= RVJ;
-    }
-
-    set_misa(env, env->misa_mxl, ext);
 }
 
 #ifndef CONFIG_USER_ONLY
@@ -1121,6 +1087,50 @@ static void riscv_cpu_finalize_features(RISCVCPU *cpu, Error **errp)
 #endif
 }
 
+static void riscv_cpu_sync_misa_cfg(CPURISCVState *env)
+{
+    uint32_t ext = 0;
+
+    if (riscv_cpu_cfg(env)->ext_i) {
+        ext |= RVI;
+    }
+    if (riscv_cpu_cfg(env)->ext_e) {
+        ext |= RVE;
+    }
+    if (riscv_cpu_cfg(env)->ext_m) {
+        ext |= RVM;
+    }
+    if (riscv_cpu_cfg(env)->ext_a) {
+        ext |= RVA;
+    }
+    if (riscv_cpu_cfg(env)->ext_f) {
+        ext |= RVF;
+    }
+    if (riscv_cpu_cfg(env)->ext_d) {
+        ext |= RVD;
+    }
+    if (riscv_cpu_cfg(env)->ext_c) {
+        ext |= RVC;
+    }
+    if (riscv_cpu_cfg(env)->ext_s) {
+        ext |= RVS;
+    }
+    if (riscv_cpu_cfg(env)->ext_u) {
+        ext |= RVU;
+    }
+    if (riscv_cpu_cfg(env)->ext_h) {
+        ext |= RVH;
+    }
+    if (riscv_cpu_cfg(env)->ext_v) {
+        ext |= RVV;
+    }
+    if (riscv_cpu_cfg(env)->ext_j) {
+        ext |= RVJ;
+    }
+
+    env->misa_ext = env->misa_ext_mask = ext;
+}
+
 static void riscv_cpu_realize(DeviceState *dev, Error **errp)
 {
     CPUState *cs = CPU(dev);
@@ -1156,6 +1166,14 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp)
         set_priv_version(env, priv_version);
     }
 
+    /*
+     * We can't be sure of whether we set defaults during cpu_init()
+     * or whether the user enabled/disabled some bits via cpu->cfg
+     * flags. Sync env->misa_ext with cpu->cfg now to allow us to
+     * use just env->misa_ext later.
+     */
+    riscv_cpu_sync_misa_cfg(env);
+
     /* Force disable extensions if priv spec version does not match */
     for (i = 0; i < ARRAY_SIZE(isa_edata_arr); i++) {
         if (isa_ext_is_enabled(cpu, &isa_edata_arr[i]) &&
-- 
2.39.2



  reply	other threads:[~2023-03-27 12:47 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-27 12:42 [PATCH 00/19] remove MISA ext_N flags from cpu->cfg Daniel Henrique Barboza
2023-03-27 12:42 ` Daniel Henrique Barboza [this message]
2023-03-27 12:42 ` [PATCH 02/19] target/riscv: remove MISA properties from isa_edata_arr[] Daniel Henrique Barboza
2023-03-27 12:42 ` [PATCH 03/19] target/riscv: introduce riscv_cpu_add_misa_properties() Daniel Henrique Barboza
2023-03-27 18:43   ` Richard Henderson
2023-03-27 18:59     ` Daniel Henrique Barboza
2023-03-27 18:52   ` Richard Henderson
2023-03-27 22:15     ` Daniel Henrique Barboza
2023-03-27 22:27       ` Richard Henderson
2023-03-27 12:42 ` [PATCH 04/19] target/riscv: remove cpu->cfg.ext_a Daniel Henrique Barboza
2023-03-27 12:42 ` [PATCH 05/19] target/riscv: remove cpu->cfg.ext_c Daniel Henrique Barboza
2023-03-27 12:42 ` [PATCH 06/19] target/riscv: remove cpu->cfg.ext_d Daniel Henrique Barboza
2023-03-27 12:42 ` [PATCH 07/19] target/riscv: remove cpu->cfg.ext_f Daniel Henrique Barboza
2023-03-27 12:42 ` [PATCH 08/19] target/riscv: remove cpu->cfg.ext_i Daniel Henrique Barboza
2023-03-27 12:42 ` [PATCH 09/19] target/riscv: remove cpu->cfg.ext_e Daniel Henrique Barboza
2023-03-27 12:42 ` [PATCH 10/19] target/riscv: remove cpu->cfg.ext_m Daniel Henrique Barboza
2023-03-27 12:42 ` [PATCH 11/19] target/riscv: remove cpu->cfg.ext_s Daniel Henrique Barboza
2023-03-27 12:42 ` [PATCH 12/19] target/riscv: remove cpu->cfg.ext_u Daniel Henrique Barboza
2023-03-27 12:42 ` [PATCH 13/19] target/riscv: remove cpu->cfg.ext_h Daniel Henrique Barboza
2023-03-27 12:42 ` [PATCH 14/19] target/riscv: remove cpu->cfg.ext_j Daniel Henrique Barboza
2023-03-27 12:42 ` [PATCH 15/19] target/riscv: remove cpu->cfg.ext_v Daniel Henrique Barboza
2023-03-27 12:42 ` [PATCH 16/19] target/riscv: remove riscv_cpu_sync_misa_cfg() Daniel Henrique Barboza
2023-03-27 12:42 ` [PATCH 17/19] target/riscv: remove cfg.ext_g setup from rv64_thead_c906_cpu_init() Daniel Henrique Barboza
2023-03-27 12:42 ` [PATCH 18/19] target/riscv: add RVG and remove cpu->cfg.ext_g Daniel Henrique Barboza
2023-03-27 12:42 ` [PATCH 19/19] target/riscv/cpu.c: redesign register_cpu_props() Daniel Henrique Barboza

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230327124247.106595-2-dbarboza@ventanamicro.com \
    --to=dbarboza@ventanamicro.com \
    --cc=alistair.francis@wdc.com \
    --cc=bmeng@tinylab.org \
    --cc=liweiwei@iscas.ac.cn \
    --cc=palmer@rivosinc.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-riscv@nongnu.org \
    --cc=zhiwei_liu@linux.alibaba.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).