qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: KONRAD Frederic <frederic.konrad@adacore.com>
To: Niek Linnenbank <nieklinnenbank@gmail.com>, qemu-devel@nongnu.org
Cc: b.galvani@gmail.com, peter.maydell@linaro.org, qemu-arm@nongnu.org
Subject: Re: [PATCH 00/10] Add Allwinner H3 SoC and Orange Pi PC Machine
Date: Tue, 10 Dec 2019 11:34:54 +0100	[thread overview]
Message-ID: <6d774864-2bea-ecd6-0b14-a28d0756bfbc@adacore.com> (raw)
In-Reply-To: <20191202210947.3603-1-nieklinnenbank@gmail.com>



Le 12/2/19 à 10:09 PM, Niek Linnenbank a écrit :
> Dear QEMU developers,
> 
> Hereby I would like to contribute the following set of patches to QEMU
> which add support for the Allwinner H3 System on Chip and the
> Orange Pi PC machine. The following features and devices are supported:
> 
>   * SMP (Quad Core Cortex A7)
>   * Generic Interrupt Controller configuration
>   * SRAM mappings
>   * Timer device (re-used from Allwinner A10)
>   * UART
>   * SD/MMC storage controller
>   * EMAC ethernet connectivity
>   * USB 2.0 interfaces
>   * Clock Control Unit
>   * System Control module
>   * Security Identifier device
> 
> Functionality related to graphical output such as HDMI, GPU,
> Display Engine and audio are not included. Recently released
> mainline Linux kernels (4.19 up to latest master) and mainline U-Boot
> are known to work. The SD/MMC code is tested using bonnie++ and
> various tools such as fsck, dd and fdisk. The EMAC is verified with iperf3
> using -netdev socket.
> 
> To build a Linux mainline kernel that can be booted by the Orange Pi PC
> machine, simply configure the kernel using the sunxi_defconfig configuration:
>   $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make mrproper
>   $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make sunxi_defconfig
> 
> To be able to use USB storage, you need to manually enable the corresponding
> configuration item. Start the kconfig configuration tool:
>   $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make menuconfig
> 
> Navigate to the following item, enable it and save your configuration:
>   Device Drivers > USB support > USB Mass Storage support
> 
> Build the Linux kernel with:
>   $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make -j5
> 
> To boot the newly build linux kernel in QEMU with the Orange Pi PC machine, use:
>   $ qemu-system-arm -M orangepi -m 512 -nic user -nographic \
>       -kernel /path/to/linux/arch/arm/boot/zImage \
>       -append 'console=ttyS0,115200' \
>       -dtb /path/to/linux/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dtb
> 
> Note that this kernel does not have a root filesystem. You may provide it
> with an official Orange Pi PC image [1] either as an SD card or as
> USB mass storage. To boot using the Orange Pi PC Debian image on SD card,
> simply add the -sd argument and provide the proper root= kernel parameter:
>   $ qemu-system-arm -M orangepi -m 512 -nic user -nographic \
>       -kernel /path/to/linux/arch/arm/boot/zImage \
>       -append 'console=ttyS0,115200 root=/dev/mmcblk0p2' \
>       -dtb /path/to/linux/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dtb \
>       -sd OrangePi_pc_debian_stretch_server_linux5.3.5_v1.0.img
> 
> Alternatively, you can also choose to build and boot a recent buildroot [2]
> using the orangepi_pc_defconfig or Armbian image [3] for Orange Pi PC.
> To attach an USB mass storage device to the machine, simply append to the command:
>   -drive if=none,id=stick,file=myimage.img \
>   -device usb-storage,bus=usb-bus.0,drive=stick
> 
> U-Boot mainline can be build and configured using the orangepi_pc_defconfig
> using similar commands as describe above for Linux. To start U-Boot using
> the Orange Pi PC machine, provide the u-boot binary to the -kernel argument:
>   $ qemu-system-arm -M orangepi -m 512 -nic user -nographic \
>       -kernel /path/to/uboot/u-boot -sd disk.img
> 
> Use the following U-boot commands to load and boot a Linux kernel from SD card:
>   -> setenv bootargs console=ttyS0,115200
>   -> ext2load mmc 0 0x42000000 zImage
>   -> ext2load mmc 0 0x43000000 sun8i-h2-plus-orangepi-zero.dtb
>   -> bootz 0x42000000 - 0x43000000
> 
> Looking forward to your review comments. I will do my best
> to update the patches where needed.
> 
> With kind regards,
> 
> Niek Linnenbank
> 
> [1] http://www.orangepi.org/downloadresources/
> [2] https://buildroot.org/download.html
> [3] https://www.armbian.com/orange-pi-pc/

Works well on my side with vanilla linux-4.9.13 built with gcc-8.3.0 + busybox
and sun8i-h3-orangepi-one.dtb.

Tested-by: KONRAD Frederic <frederic.konrad@adacore.com>

> 
> Niek Linnenbank (10):
>    hw: arm: add Allwinner H3 System-on-Chip
>    hw: arm: add Xunlong Orange Pi PC machine
>    arm: allwinner-h3: add Clock Control Unit
>    arm: allwinner-h3: add USB host controller
>    arm: allwinner-h3: add System Control module
>    arm/arm-powerctl: set NSACR.{CP11,CP10} bits in arm_set_cpu_on()
>    arm: allwinner-h3: add CPU Configuration module
>    arm: allwinner-h3: add Security Identifier device
>    arm: allwinner-h3: add SD/MMC host controller
>    arm: allwinner-h3: add EMAC ethernet device
> 
>   MAINTAINERS                           |   8 +
>   default-configs/arm-softmmu.mak       |   1 +
>   hw/arm/Kconfig                        |   9 +
>   hw/arm/Makefile.objs                  |   1 +
>   hw/arm/allwinner-h3.c                 | 316 ++++++++++
>   hw/arm/orangepi.c                     | 114 ++++
>   hw/misc/Makefile.objs                 |   4 +
>   hw/misc/allwinner-h3-clk.c            | 227 ++++++++
>   hw/misc/allwinner-h3-cpucfg.c         | 280 +++++++++
>   hw/misc/allwinner-h3-sid.c            | 162 ++++++
>   hw/misc/allwinner-h3-syscon.c         | 139 +++++
>   hw/misc/trace-events                  |   5 +
>   hw/net/Kconfig                        |   3 +
>   hw/net/Makefile.objs                  |   1 +
>   hw/net/allwinner-h3-emac.c            | 786 +++++++++++++++++++++++++
>   hw/net/trace-events                   |  10 +
>   hw/sd/Makefile.objs                   |   1 +
>   hw/sd/allwinner-h3-sdhost.c           | 791 ++++++++++++++++++++++++++
>   hw/sd/trace-events                    |   7 +
>   hw/usb/hcd-ehci-sysbus.c              |  17 +
>   hw/usb/hcd-ehci.h                     |   1 +
>   include/hw/arm/allwinner-h3.h         | 130 +++++
>   include/hw/misc/allwinner-h3-clk.h    |  41 ++
>   include/hw/misc/allwinner-h3-cpucfg.h |  44 ++
>   include/hw/misc/allwinner-h3-sid.h    |  42 ++
>   include/hw/misc/allwinner-h3-syscon.h |  43 ++
>   include/hw/net/allwinner-h3-emac.h    |  69 +++
>   include/hw/sd/allwinner-h3-sdhost.h   |  73 +++
>   target/arm/arm-powerctl.c             |   3 +
>   29 files changed, 3328 insertions(+)
>   create mode 100644 hw/arm/allwinner-h3.c
>   create mode 100644 hw/arm/orangepi.c
>   create mode 100644 hw/misc/allwinner-h3-clk.c
>   create mode 100644 hw/misc/allwinner-h3-cpucfg.c
>   create mode 100644 hw/misc/allwinner-h3-sid.c
>   create mode 100644 hw/misc/allwinner-h3-syscon.c
>   create mode 100644 hw/net/allwinner-h3-emac.c
>   create mode 100644 hw/sd/allwinner-h3-sdhost.c
>   create mode 100644 include/hw/arm/allwinner-h3.h
>   create mode 100644 include/hw/misc/allwinner-h3-clk.h
>   create mode 100644 include/hw/misc/allwinner-h3-cpucfg.h
>   create mode 100644 include/hw/misc/allwinner-h3-sid.h
>   create mode 100644 include/hw/misc/allwinner-h3-syscon.h
>   create mode 100644 include/hw/net/allwinner-h3-emac.h
>   create mode 100644 include/hw/sd/allwinner-h3-sdhost.h
> 


  parent reply	other threads:[~2019-12-10 10:36 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-02 21:09 [PATCH 00/10] Add Allwinner H3 SoC and Orange Pi PC Machine Niek Linnenbank
2019-12-02 21:09 ` [PATCH 01/10] hw: arm: add Allwinner H3 System-on-Chip Niek Linnenbank
2019-12-04 16:53   ` Philippe Mathieu-Daudé
2019-12-04 20:44     ` Niek Linnenbank
2019-12-10  9:02   ` Philippe Mathieu-Daudé
2019-12-10 19:17     ` Niek Linnenbank
2019-12-02 21:09 ` [PATCH 02/10] hw: arm: add Xunlong Orange Pi PC machine Niek Linnenbank
2019-12-03  9:17   ` Philippe Mathieu-Daudé
2019-12-03 19:33     ` Niek Linnenbank
2019-12-04  9:03       ` Philippe Mathieu-Daudé
2019-12-04 19:50         ` Niek Linnenbank
2019-12-05 22:15     ` Niek Linnenbank
2019-12-06  5:41       ` Philippe Mathieu-Daudé
2019-12-06 22:15         ` Niek Linnenbank
2019-12-10  8:59           ` Philippe Mathieu-Daudé
2019-12-10 19:14             ` Niek Linnenbank
2019-12-02 21:09 ` [PATCH 03/10] arm: allwinner-h3: add Clock Control Unit Niek Linnenbank
2019-12-13  0:03   ` Philippe Mathieu-Daudé
2019-12-02 21:09 ` [PATCH 04/10] arm: allwinner-h3: add USB host controller Niek Linnenbank
2019-12-04 16:11   ` Aleksandar Markovic
2019-12-04 20:20     ` Niek Linnenbank
2019-12-10  7:56   ` Philippe Mathieu-Daudé
2019-12-10  8:29     ` Gerd Hoffmann
2019-12-10 19:11       ` Niek Linnenbank
2019-12-02 21:09 ` [PATCH 05/10] arm: allwinner-h3: add System Control module Niek Linnenbank
2019-12-13  0:09   ` Philippe Mathieu-Daudé
2019-12-15 23:27     ` Niek Linnenbank
2019-12-16  0:17       ` Philippe Mathieu-Daudé
2019-12-02 21:09 ` [PATCH 06/10] arm/arm-powerctl: set NSACR.{CP11, CP10} bits in arm_set_cpu_on() Niek Linnenbank
2019-12-06 14:24   ` Peter Maydell
2019-12-06 20:01     ` Niek Linnenbank
2019-12-13 20:52       ` Niek Linnenbank
2019-12-02 21:09 ` [PATCH 07/10] arm: allwinner-h3: add CPU Configuration module Niek Linnenbank
2019-12-02 21:09 ` [PATCH 08/10] arm: allwinner-h3: add Security Identifier device Niek Linnenbank
2019-12-06 14:27   ` Peter Maydell
2019-12-06 16:35     ` Philippe Mathieu-Daudé
2019-12-06 20:20       ` Niek Linnenbank
2019-12-02 21:09 ` [PATCH 09/10] arm: allwinner-h3: add SD/MMC host controller Niek Linnenbank
2019-12-11 22:34   ` Niek Linnenbank
2019-12-12 23:56     ` Philippe Mathieu-Daudé
2019-12-13 21:00       ` Niek Linnenbank
2019-12-14 13:59         ` Philippe Mathieu-Daudé
2019-12-14 20:32           ` Niek Linnenbank
2019-12-15 23:07       ` Niek Linnenbank
2019-12-16  0:14         ` Philippe Mathieu-Daudé
2019-12-16 19:46           ` Niek Linnenbank
2019-12-16 21:28             ` Philippe Mathieu-Daudé
2019-12-02 21:09 ` [PATCH 10/10] arm: allwinner-h3: add EMAC ethernet device Niek Linnenbank
2019-12-03  9:33   ` KONRAD Frederic
2019-12-03 19:41     ` Niek Linnenbank
2019-12-04 15:14     ` Philippe Mathieu-Daudé
2019-12-04 15:22       ` KONRAD Frederic
2019-12-03  8:47 ` [PATCH 00/10] Add Allwinner H3 SoC and Orange Pi PC Machine Philippe Mathieu-Daudé
2019-12-03 19:25   ` Niek Linnenbank
2019-12-10  8:40     ` Philippe Mathieu-Daudé
2019-12-09 21:37   ` Niek Linnenbank
2019-12-10  8:26     ` Philippe Mathieu-Daudé
2019-12-10 20:12       ` Niek Linnenbank
2019-12-12 23:07         ` Niek Linnenbank
2019-12-12 23:25           ` Philippe Mathieu-Daudé
2019-12-13 20:45             ` Niek Linnenbank
2019-12-03  9:02 ` Philippe Mathieu-Daudé
2019-12-03 19:32   ` Niek Linnenbank
2019-12-06 14:16     ` Peter Maydell
2019-12-09 22:24       ` Aleksandar Markovic
2019-12-10 10:34 ` KONRAD Frederic [this message]
2019-12-10 19:55   ` Niek Linnenbank

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6d774864-2bea-ecd6-0b14-a28d0756bfbc@adacore.com \
    --to=frederic.konrad@adacore.com \
    --cc=b.galvani@gmail.com \
    --cc=nieklinnenbank@gmail.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).