qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
* [PATCH  v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus)
@ 2021-05-04 10:01 Alex Bennée
  2021-05-04 10:01 ` [PATCH v2 01/30] checkpatch: Fix use of uninitialized value Alex Bennée
                   ` (30 more replies)
  0 siblings, 31 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:01 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, f4bug, stefanha, crosa, pbonzini,
	Alex Bennée, aurelien

Hi,

Now that the tree is open time to start the testing updates again.
I've added another tweak to configure I found while testing on non-x86
boxen. There are also a few fixes for an errant file that got added
with the tricore tests and a fix rth pointed out that meant hexagon
wasn't actually running it's tests. The signal smasher test which was
used to find the s390x issue is now included although still disabled
for sparc/alpha while their fixes are in flight.

The following remain un-reviewed:

 - configure: use cc, not host_cc to set cross_cc for build arch
 - tests/tcg: add a multiarch signals test to stress test signal delivery
 - tests/tcg: don't iterate through other arch compilers

Alessandro Di Federico (2):
  docker: Add Hexagon image
  tests/tcg: Use Hexagon Docker image

Alex Bennée (8):
  tests/docker: fix copying of executable in "update"
  tests/docker: make executable an optional argument to "update"
  tests/docker: allow "update" to add the current user
  tests/docker: add "fetch" sub-command
  gitlab: add build-user-hexagon test
  tests/tcg: don't iterate through other arch compilers
  tests/tcg: add a multiarch signals test to stress test signal delivery
  configure: use cc, not host_cc to set cross_cc for build arch

Andrew Melnychenko (1):
  tests/docker: Added libbpf library to the docker files.

Bastian Koppelmann (15):
  tests/tcg: Add docker_as and docker_ld cmds
  tests/tcg: Run timeout cmds using --foreground
  hw/tricore: Add testdevice for tests in tests/tcg/
  tests/tcg/tricore: Add build infrastructure
  configure: Emit HOST_CC to config-host.mak
  tests/tcg/tricore: Add macros to create tests and first test 'abs'
  tests/tcg/tricore: Add bmerge test
  tests/tcg/tricore: Add clz test
  tests/tcg/tricore: Add dvstep test
  tests/tcg/tricore: Add fadd test
  tests/tcg/tricore: Add fmul test
  tests/tcg/tricore: Add ftoi test
  tests/tcg/tricore: Add madd test
  tests/tcg/tricore: Add msub test
  tests/tcg/tricore: Add muls test

Greg Kurz (1):
  checkpatch: Fix use of uninitialized value

Matheus Ferst (2):
  tests/docker: gcc-10 based images for ppc64{,le} tests
  tests/tcg/ppc64le: tests for brh/brw/brd

Thomas Huth (1):
  cirrus.yml: Fix the MSYS2 task

 configure                                     |   3 +-
 include/hw/tricore/tricore_testdevice.h       |  38 ++++
 tests/tcg/tricore/macros.h                    | 129 ++++++++++++
 hw/tricore/tricore_testboard.c                |   8 +
 hw/tricore/tricore_testdevice.c               |  82 ++++++++
 tests/tcg/multiarch/signals.c                 | 149 +++++++++++++
 tests/tcg/ppc64le/byte_reverse.c              |  21 ++
 .cirrus.yml                                   |   4 +-
 .gitlab-ci.d/containers.yml                   |  13 +-
 .gitlab-ci.yml                                |  11 +
 MAINTAINERS                                   |   3 +
 hw/tricore/meson.build                        |   1 +
 scripts/checkpatch.pl                         |   1 +
 tests/docker/Makefile.include                 |  29 ++-
 tests/docker/docker.py                        |  78 +++++--
 tests/docker/dockerfiles/alpine.docker        |   1 +
 tests/docker/dockerfiles/centos8.docker       |   1 +
 .../dockerfiles/debian-hexagon-cross.docker   |  44 ++++
 .../build-toolchain.sh                        | 141 +++++++++++++
 .../dockerfiles/debian-powerpc-cross.docker   |  12 --
 .../debian-powerpc-test-cross.docker          |  17 ++
 .../dockerfiles/debian-ppc64-cross.docker     |  11 -
 tests/docker/dockerfiles/fedora.docker        |   1 +
 tests/tcg/Makefile.qemu                       |  17 ++
 tests/tcg/Makefile.target                     |   5 +-
 tests/tcg/alpha/Makefile.target               |   7 +
 tests/tcg/configure.sh                        | 196 +++++++++---------
 tests/tcg/multiarch/Makefile.target           |   2 +
 tests/tcg/ppc64/Makefile.target               |  13 ++
 tests/tcg/ppc64le/Makefile.target             |  13 ++
 tests/tcg/sparc64/Makefile.target             |   7 +
 tests/tcg/tricore/Makefile.softmmu-target     |  26 +++
 tests/tcg/tricore/link.ld                     |  60 ++++++
 tests/tcg/tricore/test_abs.S                  |   7 +
 tests/tcg/tricore/test_bmerge.S               |   8 +
 tests/tcg/tricore/test_clz.S                  |   9 +
 tests/tcg/tricore/test_dvstep.S               |  15 ++
 tests/tcg/tricore/test_fadd.S                 |  16 ++
 tests/tcg/tricore/test_fmul.S                 |   8 +
 tests/tcg/tricore/test_ftoi.S                 |  10 +
 tests/tcg/tricore/test_madd.S                 |  11 +
 tests/tcg/tricore/test_msub.S                 |   9 +
 tests/tcg/tricore/test_muls.S                 |   9 +
 43 files changed, 1083 insertions(+), 163 deletions(-)
 create mode 100644 include/hw/tricore/tricore_testdevice.h
 create mode 100644 tests/tcg/tricore/macros.h
 create mode 100644 hw/tricore/tricore_testdevice.c
 create mode 100644 tests/tcg/multiarch/signals.c
 create mode 100644 tests/tcg/ppc64le/byte_reverse.c
 create mode 100644 tests/docker/dockerfiles/debian-hexagon-cross.docker
 create mode 100755 tests/docker/dockerfiles/debian-hexagon-cross.docker.d/build-toolchain.sh
 delete mode 100644 tests/docker/dockerfiles/debian-powerpc-cross.docker
 create mode 100644 tests/docker/dockerfiles/debian-powerpc-test-cross.docker
 delete mode 100644 tests/docker/dockerfiles/debian-ppc64-cross.docker
 create mode 100644 tests/tcg/tricore/Makefile.softmmu-target
 create mode 100644 tests/tcg/tricore/link.ld
 create mode 100644 tests/tcg/tricore/test_abs.S
 create mode 100644 tests/tcg/tricore/test_bmerge.S
 create mode 100644 tests/tcg/tricore/test_clz.S
 create mode 100644 tests/tcg/tricore/test_dvstep.S
 create mode 100644 tests/tcg/tricore/test_fadd.S
 create mode 100644 tests/tcg/tricore/test_fmul.S
 create mode 100644 tests/tcg/tricore/test_ftoi.S
 create mode 100644 tests/tcg/tricore/test_madd.S
 create mode 100644 tests/tcg/tricore/test_msub.S
 create mode 100644 tests/tcg/tricore/test_muls.S

-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 01/30] checkpatch: Fix use of uninitialized value
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
@ 2021-05-04 10:01 ` Alex Bennée
  2021-05-12  4:47   ` Philippe Mathieu-Daudé
  2021-05-04 10:01 ` [PATCH v2 02/30] tests/docker: fix copying of executable in "update" Alex Bennée
                   ` (29 subsequent siblings)
  30 siblings, 1 reply; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:01 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, Isaku Yamahata, berrange, f4bug, Greg Kurz, stefanha, crosa,
	pbonzini, Alex Bennée, aurelien

From: Greg Kurz <groug@kaod.org>

checkfilename() doesn't always set $acpi_testexpected. Fix the following
warning:

Use of uninitialized value $acpi_testexpected in string eq at
 ./scripts/checkpatch.pl line 1529.

Fixes: d2f1af0e4120 ("checkpatch: don't emit warning on newly created acpi data files")
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Cc: isaku.yamahata@intel.com
Message-Id: <20210408164610.14229-1-alex.bennee@linaro.org>
Message-Id: <161786467973.295167.5612704777283969903.stgit@bahia.lan>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
 scripts/checkpatch.pl | 1 +
 1 file changed, 1 insertion(+)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 8f7053ec9b..3d185cceac 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1532,6 +1532,7 @@ sub process {
 		     ($line =~ /\{\s*([\w\/\.\-]*)\s*\=\>\s*([\w\/\.\-]*)\s*\}/ &&
 		      (defined($1) || defined($2)))) &&
                       !(($realfile ne '') &&
+                        defined($acpi_testexpected) &&
                         ($realfile eq $acpi_testexpected))) {
 			$reported_maintainer_file = 1;
 			WARN("added, moved or deleted file(s), does MAINTAINERS need updating?\n" . $herecurr);
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH v2 02/30] tests/docker: fix copying of executable in "update"
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
  2021-05-04 10:01 ` [PATCH v2 01/30] checkpatch: Fix use of uninitialized value Alex Bennée
@ 2021-05-04 10:01 ` Alex Bennée
  2021-05-04 10:01 ` [PATCH v2 03/30] tests/docker: make executable an optional argument to "update" Alex Bennée
                   ` (28 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:01 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, Thomas Huth, berrange, f4bug, Wainer dos Santos Moschetta,
	Willian Rampazzo, stefanha, crosa, pbonzini, Alex Bennée,
	aurelien

We have the same symlink chasing problem when doing an "update"
operation. Fix that.

Based-on: 5e33f7fead ("tests/docker: better handle symlinked libs")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
---
 tests/docker/docker.py | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/tests/docker/docker.py b/tests/docker/docker.py
index d28df4c140..0435a55d10 100755
--- a/tests/docker/docker.py
+++ b/tests/docker/docker.py
@@ -548,7 +548,14 @@ def run(self, args, argv):
         libs = _get_so_libs(args.executable)
         if libs:
             for l in libs:
-                tmp_tar.add(os.path.realpath(l), arcname=l)
+                so_path = os.path.dirname(l)
+                name = os.path.basename(l)
+                real_l = os.path.realpath(l)
+                try:
+                    tmp_tar.add(real_l, arcname="%s/%s" % (so_path, name))
+                except FileNotFoundError:
+                    print("Couldn't add %s/%s to archive" % (so_path, name))
+                    pass
 
         # Create a Docker buildfile
         df = StringIO()
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH v2 03/30] tests/docker: make executable an optional argument to "update"
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
  2021-05-04 10:01 ` [PATCH v2 01/30] checkpatch: Fix use of uninitialized value Alex Bennée
  2021-05-04 10:01 ` [PATCH v2 02/30] tests/docker: fix copying of executable in "update" Alex Bennée
@ 2021-05-04 10:01 ` Alex Bennée
  2021-05-04 10:01 ` [PATCH v2 04/30] tests/docker: allow "update" to add the current user Alex Bennée
                   ` (27 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:01 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, Thomas Huth, berrange, f4bug, Wainer dos Santos Moschetta,
	Willian Rampazzo, stefanha, crosa, pbonzini, Alex Bennée,
	aurelien

We're going to extend the abilities of the command shortly.

Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

---
v2
  - fix indention issue
---
 tests/docker/Makefile.include |  2 +-
 tests/docker/docker.py        | 56 ++++++++++++++++++-----------------
 2 files changed, 30 insertions(+), 28 deletions(-)

diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
index 9f464cb92c..820423d718 100644
--- a/tests/docker/Makefile.include
+++ b/tests/docker/Makefile.include
@@ -248,7 +248,7 @@ docker-run: docker-qemu-src
 	$(if $(EXECUTABLE),						\
 		$(call quiet-command,					\
 			$(DOCKER_SCRIPT) update 			\
-			$(IMAGE) $(EXECUTABLE),				\
+			$(IMAGE) --executable $(EXECUTABLE),		\
 			"  COPYING $(EXECUTABLE) to $(IMAGE)"))
 	$(call quiet-command,						\
 		$(DOCKER_SCRIPT) run 					\
diff --git a/tests/docker/docker.py b/tests/docker/docker.py
index 0435a55d10..9b3425fec2 100755
--- a/tests/docker/docker.py
+++ b/tests/docker/docker.py
@@ -523,7 +523,7 @@ class UpdateCommand(SubCommand):
     def args(self, parser):
         parser.add_argument("tag",
                             help="Image Tag")
-        parser.add_argument("executable",
+        parser.add_argument("--executable",
                             help="Executable to copy")
 
     def run(self, args, argv):
@@ -532,35 +532,37 @@ def run(self, args, argv):
         tmp = tempfile.NamedTemporaryFile(suffix="dckr.tar.gz")
         tmp_tar = TarFile(fileobj=tmp, mode='w')
 
-        # Add the executable to the tarball, using the current
-        # configured binfmt_misc path. If we don't get a path then we
-        # only need the support libraries copied
-        ff, enabled = _check_binfmt_misc(args.executable)
-
-        if not enabled:
-            print("binfmt_misc not enabled, update disabled")
-            return 1
-
-        if ff:
-            tmp_tar.add(args.executable, arcname=ff)
-
-        # Add any associated libraries
-        libs = _get_so_libs(args.executable)
-        if libs:
-            for l in libs:
-                so_path = os.path.dirname(l)
-                name = os.path.basename(l)
-                real_l = os.path.realpath(l)
-                try:
-                    tmp_tar.add(real_l, arcname="%s/%s" % (so_path, name))
-                except FileNotFoundError:
-                    print("Couldn't add %s/%s to archive" % (so_path, name))
-                    pass
-
         # Create a Docker buildfile
         df = StringIO()
         df.write(u"FROM %s\n" % args.tag)
-        df.write(u"ADD . /\n")
+
+        if args.executable:
+            # Add the executable to the tarball, using the current
+            # configured binfmt_misc path. If we don't get a path then we
+            # only need the support libraries copied
+            ff, enabled = _check_binfmt_misc(args.executable)
+
+            if not enabled:
+                print("binfmt_misc not enabled, update disabled")
+                return 1
+
+            if ff:
+                tmp_tar.add(args.executable, arcname=ff)
+
+            # Add any associated libraries
+            libs = _get_so_libs(args.executable)
+            if libs:
+                for l in libs:
+                    so_path = os.path.dirname(l)
+                    name = os.path.basename(l)
+                    real_l = os.path.realpath(l)
+                    try:
+                        tmp_tar.add(real_l, arcname="%s/%s" % (so_path, name))
+                    except FileNotFoundError:
+                        print("Couldn't add %s/%s to archive" % (so_path, name))
+                        pass
+
+            df.write(u"ADD . /\n")
 
         df_bytes = BytesIO(bytes(df.getvalue(), "UTF-8"))
 
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH v2 04/30] tests/docker: allow "update" to add the current user
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (2 preceding siblings ...)
  2021-05-04 10:01 ` [PATCH v2 03/30] tests/docker: make executable an optional argument to "update" Alex Bennée
@ 2021-05-04 10:01 ` Alex Bennée
  2021-05-04 10:01 ` [PATCH v2 05/30] tests/docker: add "fetch" sub-command Alex Bennée
                   ` (26 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:01 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, Thomas Huth, berrange, f4bug, Wainer dos Santos Moschetta,
	Willian Rampazzo, stefanha, crosa, pbonzini, Alex Bennée,
	aurelien

The current user functionality is used for cross compiling to avoid
complications with permissions when building test programs. However
for images that come from the registry we still need the ability to
add the user after the fact.

Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
 tests/docker/docker.py | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/tests/docker/docker.py b/tests/docker/docker.py
index 9b3425fec2..7a14058801 100755
--- a/tests/docker/docker.py
+++ b/tests/docker/docker.py
@@ -517,7 +517,7 @@ def run(self, args, argv):
 
 
 class UpdateCommand(SubCommand):
-    """ Update a docker image with new executables. Args: <tag> <executable>"""
+    """ Update a docker image. Args: <tag> <actions>"""
     name = "update"
 
     def args(self, parser):
@@ -525,6 +525,9 @@ def args(self, parser):
                             help="Image Tag")
         parser.add_argument("--executable",
                             help="Executable to copy")
+        parser.add_argument("--add-current-user", "-u", dest="user",
+                            action="store_true",
+                            help="Add the current user to image's passwd")
 
     def run(self, args, argv):
         # Create a temporary tarball with our whole build context and
@@ -564,6 +567,13 @@ def run(self, args, argv):
 
             df.write(u"ADD . /\n")
 
+        if args.user:
+            uid = os.getuid()
+            uname = getpwuid(uid).pw_name
+            df.write("\n")
+            df.write("RUN id %s 2>/dev/null || useradd -u %d -U %s" %
+                     (uname, uid, uname))
+
         df_bytes = BytesIO(bytes(df.getvalue(), "UTF-8"))
 
         df_tar = TarInfo(name="Dockerfile")
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 05/30] tests/docker: add "fetch" sub-command
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (3 preceding siblings ...)
  2021-05-04 10:01 ` [PATCH v2 04/30] tests/docker: allow "update" to add the current user Alex Bennée
@ 2021-05-04 10:01 ` Alex Bennée
  2021-05-04 10:01 ` [PATCH v2 06/30] docker: Add Hexagon image Alex Bennée
                   ` (25 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:01 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, Thomas Huth, berrange, f4bug, Wainer dos Santos Moschetta,
	Willian Rampazzo, stefanha, crosa, pbonzini, Alex Bennée,
	aurelien

This simply wraps up fetching a build from the registry and tagging it
as the local build.

Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
 tests/docker/docker.py | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/tests/docker/docker.py b/tests/docker/docker.py
index 7a14058801..4d9bb7c7ed 100755
--- a/tests/docker/docker.py
+++ b/tests/docker/docker.py
@@ -515,6 +515,23 @@ def run(self, args, argv):
 
         return 0
 
+class FetchCommand(SubCommand):
+    """ Fetch a docker image from the registry. Args: <tag> <registry>"""
+    name = "fetch"
+
+    def args(self, parser):
+        parser.add_argument("tag",
+                            help="Local tag for image")
+        parser.add_argument("registry",
+                            help="Docker registry")
+
+    def run(self, args, argv):
+        dkr = Docker()
+        dkr.command(cmd="pull", quiet=args.quiet,
+                    argv=["%s/%s" % (args.registry, args.tag)])
+        dkr.command(cmd="tag", quiet=args.quiet,
+                    argv=["%s/%s" % (args.registry, args.tag), args.tag])
+
 
 class UpdateCommand(SubCommand):
     """ Update a docker image. Args: <tag> <actions>"""
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 06/30] docker: Add Hexagon image
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (4 preceding siblings ...)
  2021-05-04 10:01 ` [PATCH v2 05/30] tests/docker: add "fetch" sub-command Alex Bennée
@ 2021-05-04 10:01 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 07/30] tests/tcg: Use Hexagon Docker image Alex Bennée
                   ` (24 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:01 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, Alessandro Di Federico, Thomas Huth, berrange, Brian Cain,
	f4bug, Wainer dos Santos Moschetta, Willian Rampazzo, stefanha,
	crosa, pbonzini, Alex Bennée, aurelien

From: Alessandro Di Federico <ale@rev.ng>

This image is a little special because it takes a long time to build.
As such most users don't want to be doing that and just pull random
binaries from the ether as intended by the container gods. This
involves someone with credentials and a beefy machine running:

  make docker-image-debian-hexagon-cross V=1 NOCACHE=1 J=30
  docker tag qemu/debian-hexagon-cross registry.gitlab.com/qemu-project/qemu/qemu/debian-hexagon-cross
  docker push registry.gitlab.com/qemu-project/qemu/qemu/debian-hexagon-cross

With a suitable binary in the "cloud" a normal user will run:

  make docker-image-debian-hexagon-cross

or have it run for them through the dependency mechanism of our
over-engineered makefiles and get the binary they wanted. There are a
few wrinkles of course including needing to tweak the final image to
have the credentials of the user so we can actually do our cross
compiles.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Alessandro Di Federico <ale@rev.ng>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Brian Cain <bcain@quicinc.com>

---
vAJB:
  - dropped all r-b/sob due to rewrite
  - split into a multi-stage dockerfile
  - make dockerfile standalone
  - play fugly make games
v2
  - update LLVM version per BN7PR02MB4194DF5752EF3BADE858018DB8799@BN7PR02MB4194.namprd02.prod.outlook.com
---
 MAINTAINERS                                   |   2 +
 tests/docker/Makefile.include                 |  22 +++
 .../dockerfiles/debian-hexagon-cross.docker   |  44 ++++++
 .../build-toolchain.sh                        | 141 ++++++++++++++++++
 4 files changed, 209 insertions(+)
 create mode 100644 tests/docker/dockerfiles/debian-hexagon-cross.docker
 create mode 100755 tests/docker/dockerfiles/debian-hexagon-cross.docker.d/build-toolchain.sh

diff --git a/MAINTAINERS b/MAINTAINERS
index 4c05ff8bba..fc0b429b45 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -197,6 +197,8 @@ F: linux-user/hexagon/
 F: tests/tcg/hexagon/
 F: disas/hexagon.c
 F: default-configs/targets/hexagon-linux-user.mak
+F: docker/dockerfiles/debian-hexagon-cross.docker
+F: docker/dockerfiles/debian-hexagon-cross.docker.d/build-toolchain.sh
 
 HPPA (PA-RISC) TCG CPUs
 M: Richard Henderson <richard.henderson@linaro.org>
diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
index 820423d718..8967ecf118 100644
--- a/tests/docker/Makefile.include
+++ b/tests/docker/Makefile.include
@@ -148,6 +148,28 @@ docker-image-debian-s390x-cross: docker-image-debian10
 docker-image-debian-sh4-cross: docker-image-debian10
 docker-image-debian-sparc64-cross: docker-image-debian10
 
+#
+# The build rule for hexagon-cross is special in so far for most of
+# the time we don't want to build it. While dockers caching does avoid
+# this most of the time sometimes we want to force the issue.
+#
+docker-image-debian-hexagon-cross: $(DOCKER_FILES_DIR)/debian-hexagon-cross.docker
+	$(if $(NOCACHE), 								\
+		$(call quiet-command,							\
+			$(DOCKER_SCRIPT) build -t qemu/debian-hexagon-cross -f $< 	\
+			$(if $V,,--quiet) --no-cache 					\
+			--registry $(DOCKER_REGISTRY) --extra-files			\
+			$(DOCKER_FILES_DIR)/debian-hexagon-cross.docker.d/build-toolchain.sh, \
+			"BUILD", "debian-hexagon-cross"),				\
+		$(call quiet-command,							\
+			$(DOCKER_SCRIPT) fetch $(if $V,,--quiet)			\
+				qemu/debian-hexagon-cross $(DOCKER_REGISTRY),		\
+			"FETCH", "debian-hexagon-cross")				\
+		$(call quiet-command,							\
+			$(DOCKER_SCRIPT) update $(if $V,,--quiet) 			\
+				qemu/debian-hexagon-cross --add-current-user,		\
+			"PREPARE", "debian-hexagon-cross"))
+
 # Specialist build images, sometimes very limited tools
 docker-image-debian-tricore-cross: docker-image-debian10
 docker-image-debian-all-test-cross: docker-image-debian10
diff --git a/tests/docker/dockerfiles/debian-hexagon-cross.docker b/tests/docker/dockerfiles/debian-hexagon-cross.docker
new file mode 100644
index 0000000000..1d19e8f29c
--- /dev/null
+++ b/tests/docker/dockerfiles/debian-hexagon-cross.docker
@@ -0,0 +1,44 @@
+#
+# Docker Hexagon cross-compiler target
+#
+# This docker target is used for building hexagon tests. As it also
+# needs to be able to build QEMU itself in CI we include it's
+# build-deps. It is also a "stand-alone" image so as not to be
+# triggered by re-builds on other base images given it takes a long
+# time to build.
+#
+FROM qemu/debian10
+
+# Install common build utilities
+RUN apt update && \
+    DEBIAN_FRONTEND=noninteractive apt install -yy eatmydata && \
+    DEBIAN_FRONTEND=noninteractive eatmydata \
+    apt install -y --no-install-recommends \
+        bison \
+        cmake \
+        flex \
+        lld \
+        rsync \
+        wget
+
+ENV TOOLCHAIN_INSTALL /usr/local
+ENV ROOTFS /usr/local
+
+ENV LLVM_URL https://github.com/llvm/llvm-project/archive/bfcd21876adc3498065e4da92799f613e730d475.tar.gz
+ENV MUSL_URL https://github.com/quic/musl/archive/aff74b395fbf59cd7e93b3691905aa1af6c0778c.tar.gz
+ENV LINUX_URL https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.6.18.tar.xz
+
+ADD build-toolchain.sh /root/hexagon-toolchain/build-toolchain.sh
+
+RUN cd /root/hexagon-toolchain && ./build-toolchain.sh
+
+FROM debian:buster-slim
+# Duplicate deb line as deb-src
+RUN cat /etc/apt/sources.list | sed "s/^deb\ /deb-src /" >> /etc/apt/sources.list
+# Install QEMU build deps for use in CI
+RUN apt update && \
+    DEBIAN_FRONTEND=noninteractive apt install -yy eatmydata && \
+    DEBIAN_FRONTEND=noninteractive eatmydata \
+    apt build-dep -yy --arch-only qemu
+COPY --from=0 /usr/local /usr/local
+ENV PATH $PATH:/usr/local/bin/
diff --git a/tests/docker/dockerfiles/debian-hexagon-cross.docker.d/build-toolchain.sh b/tests/docker/dockerfiles/debian-hexagon-cross.docker.d/build-toolchain.sh
new file mode 100755
index 0000000000..19b1c9f83e
--- /dev/null
+++ b/tests/docker/dockerfiles/debian-hexagon-cross.docker.d/build-toolchain.sh
@@ -0,0 +1,141 @@
+#!/bin/bash
+
+set -e
+
+BASE=$(readlink -f ${PWD})
+
+TOOLCHAIN_INSTALL=$(readlink -f "$TOOLCHAIN_INSTALL")
+ROOTFS=$(readlink -f "$ROOTFS")
+
+TOOLCHAIN_BIN=${TOOLCHAIN_INSTALL}/bin
+HEX_SYSROOT=${TOOLCHAIN_INSTALL}/hexagon-unknown-linux-musl
+HEX_TOOLS_TARGET_BASE=${HEX_SYSROOT}/usr
+
+function cdp() {
+  DIR="$1"
+  mkdir -p "$DIR"
+  cd "$DIR"
+}
+
+function fetch() {
+  DIR="$1"
+  URL="$2"
+  TEMP="$(readlink -f "$PWD/tmp.tar.gz")"
+  wget --quiet "$URL" -O "$TEMP"
+  cdp "$DIR"
+  tar xaf "$TEMP" --strip-components=1
+  rm "$TEMP"
+  cd -
+}
+
+build_llvm_clang() {
+  fetch "$BASE/llvm-project" "$LLVM_URL"
+  cdp "$BASE/build-llvm"
+
+  cmake -G Ninja \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=${TOOLCHAIN_INSTALL} \
+    -DLLVM_ENABLE_LLD=ON \
+    -DLLVM_TARGETS_TO_BUILD="Hexagon" \
+    -DLLVM_ENABLE_PROJECTS="clang;lld" \
+    "$BASE/llvm-project/llvm"
+  ninja all install
+  cd ${TOOLCHAIN_BIN}
+  ln -sf clang hexagon-unknown-linux-musl-clang
+  ln -sf clang++ hexagon-unknown-linux-musl-clang++
+  ln -sf llvm-ar hexagon-unknown-linux-musl-ar
+  ln -sf llvm-objdump hexagon-unknown-linux-musl-objdump
+  ln -sf llvm-objcopy hexagon-unknown-linux-musl-objcopy
+  ln -sf llvm-readelf hexagon-unknown-linux-musl-readelf
+  ln -sf llvm-ranlib hexagon-unknown-linux-musl-ranlib
+
+  # workaround for now:
+  cat <<EOF > hexagon-unknown-linux-musl.cfg
+-G0 --sysroot=${HEX_SYSROOT}
+EOF
+}
+
+build_clang_rt() {
+  cdp "$BASE/build-clang_rt"
+  cmake -G Ninja \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DLLVM_CONFIG_PATH="$BASE/build-llvm/bin/llvm-config" \
+    -DCMAKE_ASM_FLAGS="-G0 -mlong-calls -fno-pic --target=hexagon-unknown-linux-musl " \
+    -DCMAKE_SYSTEM_NAME=Linux \
+    -DCMAKE_C_COMPILER="${TOOLCHAIN_BIN}/hexagon-unknown-linux-musl-clang" \
+    -DCMAKE_ASM_COMPILER="${TOOLCHAIN_BIN}/hexagon-unknown-linux-musl-clang" \
+    -DCMAKE_INSTALL_PREFIX=${HEX_TOOLS_TARGET_BASE} \
+    -DCMAKE_CROSSCOMPILING=ON \
+    -DCMAKE_C_COMPILER_FORCED=ON \
+    -DCMAKE_CXX_COMPILER_FORCED=ON \
+    -DCOMPILER_RT_BUILD_BUILTINS=ON \
+    -DCOMPILER_RT_BUILTINS_ENABLE_PIC=OFF \
+    -DCMAKE_SIZEOF_VOID_P=4 \
+    -DCOMPILER_RT_OS_DIR= \
+    -DCAN_TARGET_hexagon=1 \
+    -DCAN_TARGET_x86_64=0 \
+    -DCOMPILER_RT_SUPPORTED_ARCH=hexagon \
+    -DLLVM_ENABLE_PROJECTS="compiler-rt" \
+    "$BASE/llvm-project/compiler-rt"
+  ninja install-compiler-rt
+}
+
+build_musl_headers() {
+  fetch "$BASE/musl" "$MUSL_URL"
+  cd "$BASE/musl"
+  make clean
+  CC=${TOOLCHAIN_BIN}/hexagon-unknown-linux-musl-clang \
+    CROSS_COMPILE=hexagon-unknown-linux-musl \
+    LIBCC=${HEX_TOOLS_TARGET_BASE}/lib/libclang_rt.builtins-hexagon.a \
+    CROSS_CFLAGS="-G0 -O0 -mv65 -fno-builtin -fno-rounding-math --target=hexagon-unknown-linux-musl" \
+    ./configure --target=hexagon --prefix=${HEX_TOOLS_TARGET_BASE}
+  PATH=${TOOLCHAIN_BIN}:$PATH make CROSS_COMPILE= install-headers
+
+  cd ${HEX_SYSROOT}/..
+  ln -sf hexagon-unknown-linux-musl hexagon
+}
+
+build_kernel_headers() {
+  fetch "$BASE/linux" "$LINUX_URL"
+  mkdir -p "$BASE/build-linux"
+  cd "$BASE/linux"
+  make O=../build-linux ARCH=hexagon \
+   KBUILD_CFLAGS_KERNEL="-mlong-calls" \
+   CC=${TOOLCHAIN_BIN}/hexagon-unknown-linux-musl-clang \
+   LD=${TOOLCHAIN_BIN}/ld.lld \
+   KBUILD_VERBOSE=1 comet_defconfig
+  make mrproper
+
+  cd "$BASE/build-linux"
+  make \
+    ARCH=hexagon \
+    CC=${TOOLCHAIN_BIN}/clang \
+    INSTALL_HDR_PATH=${HEX_TOOLS_TARGET_BASE} \
+    V=1 \
+    headers_install
+}
+
+build_musl() {
+  cd "$BASE/musl"
+  make clean
+  CROSS_COMPILE=hexagon-unknown-linux-musl- \
+    AR=llvm-ar \
+    RANLIB=llvm-ranlib \
+    STRIP=llvm-strip \
+    CC=clang \
+    LIBCC=${HEX_TOOLS_TARGET_BASE}/lib/libclang_rt.builtins-hexagon.a \
+    CFLAGS="-G0 -O0 -mv65 -fno-builtin -fno-rounding-math --target=hexagon-unknown-linux-musl" \
+    ./configure --target=hexagon --prefix=${HEX_TOOLS_TARGET_BASE}
+  PATH=${TOOLCHAIN_BIN}/:$PATH make CROSS_COMPILE= install
+  cd ${HEX_TOOLS_TARGET_BASE}/lib
+  ln -sf libc.so ld-musl-hexagon.so
+  ln -sf ld-musl-hexagon.so ld-musl-hexagon.so.1
+  cdp ${HEX_TOOLS_TARGET_BASE}/../lib
+  ln -sf ../usr/lib/ld-musl-hexagon.so.1
+}
+
+build_llvm_clang
+build_kernel_headers
+build_musl_headers
+build_clang_rt
+build_musl
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 07/30] tests/tcg: Use Hexagon Docker image
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (5 preceding siblings ...)
  2021-05-04 10:01 ` [PATCH v2 06/30] docker: Add Hexagon image Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 08/30] gitlab: add build-user-hexagon test Alex Bennée
                   ` (23 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, Alessandro Di Federico, berrange, f4bug, stefanha, crosa,
	pbonzini, Alex Bennée, aurelien

From: Alessandro Di Federico <ale@rev.ng>

[PMD: Split from 'Add Hexagon Docker image' patch]

Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[AJB: add container_hosts]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210228222314.304787-5-f4bug@amsat.org>
Message-Id: <20210305092328.31792-6-alex.bennee@linaro.org>
---
 tests/tcg/configure.sh | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh
index fa1a4261a4..24cc847688 100755
--- a/tests/tcg/configure.sh
+++ b/tests/tcg/configure.sh
@@ -128,6 +128,11 @@ for target in $target_list; do
       container_image=fedora-cris-cross
       container_cross_cc=cris-linux-gnu-gcc
       ;;
+    hexagon-*)
+      container_hosts=x86_64
+      container_image=debian-hexagon-cross
+      container_cross_cc=hexagon-unknown-linux-musl-clang
+      ;;
     hppa-*)
       container_hosts=x86_64
       container_image=debian-hppa-cross
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 08/30] gitlab: add build-user-hexagon test
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (6 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 07/30] tests/tcg: Use Hexagon Docker image Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 09/30] tests/tcg: don't iterate through other arch compilers Alex Bennée
                   ` (22 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, Thomas Huth, berrange, f4bug, Wainer dos Santos Moschetta,
	Willian Rampazzo, stefanha, crosa, pbonzini, Alex Bennée,
	aurelien

We special case this as the container with the cross compiler for the
tests takes so long to build it is manually uploaded into the
registry.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210305092328.31792-7-alex.bennee@linaro.org>
---
 .gitlab-ci.yml | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 52d65d6c04..87d1172b03 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -413,6 +413,17 @@ build-user-static:
     CONFIGURE_ARGS: --disable-tools --disable-system --static
     MAKE_CHECK_ARGS: check-tcg
 
+# Because the hexagon cross-compiler takes so long to build we don't rely
+# on the CI system to build it and hence this job has no dependency
+# declared. The image is manually uploaded.
+build-user-hexagon:
+  <<: *native_build_job_definition
+  variables:
+    IMAGE: debian-hexagon-cross
+    TARGETS: hexagon-linux-user
+    CONFIGURE_ARGS: --disable-tools --disable-docs --enable-debug-tcg
+    MAKE_CHECK_ARGS: check-tcg
+
 # Only build the softmmu targets we have check-tcg tests for
 build-some-softmmu:
   <<: *native_build_job_definition
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH v2 09/30] tests/tcg: don't iterate through other arch compilers
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (7 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 08/30] gitlab: add build-user-hexagon test Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 10/30] tests/docker: Added libbpf library to the docker files Alex Bennée
                   ` (21 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, f4bug, stefanha, crosa, pbonzini,
	Alex Bennée, aurelien

There should only be one compiler per architecture. Those cases where
the same compiler can deal with a different architecture should be
explicitly set for both cross_cc and docker configurations. Otherwise
you get strangeness like:

  --cross-cc-aarch64=/bin/false

causing the logic to attempt to use a locally available
arm-linux-gnueabihf-gcc rather than forcing the use of the docker
image which is what is implied by the command line option.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
 tests/tcg/configure.sh | 148 ++++++++++++++++-------------------------
 1 file changed, 59 insertions(+), 89 deletions(-)

diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh
index 24cc847688..e6c1be5450 100755
--- a/tests/tcg/configure.sh
+++ b/tests/tcg/configure.sh
@@ -74,35 +74,6 @@ fi
 
 for target in $target_list; do
   arch=${target%%-*}
-  case $arch in
-    arm|armeb)
-      arches=arm
-      ;;
-    aarch64|aarch64_be)
-      arches="aarch64 arm"
-      ;;
-    mips*)
-      arches=mips
-      ;;
-    ppc*)
-      arches=ppc
-      ;;
-    sh4|sh4eb)
-      arches=sh4
-      ;;
-    x86_64)
-      arches="x86_64 i386"
-      ;;
-    xtensa|xtensaeb)
-      arches=xtensa
-      ;;
-    alpha|cris|hexagon|hppa|i386|lm32|microblaze|microblazeel|m68k|openrisc|riscv64|s390x|sh4|sparc64)
-      arches=$target
-      ;;
-    *)
-      continue
-      ;;
-  esac
 
   container_image=
   case $target in
@@ -236,70 +207,69 @@ for target in $target_list; do
   echo "CROSS_CC_GUEST_CFLAGS=$target_compiler_cflags" >> $config_target_mak
 
   got_cross_cc=no
-  for i in $arch $arches; do
-    if eval test "x\${cross_cc_$i+yes}" != xyes; then
-      continue
-    fi
 
-    eval "target_compiler=\${cross_cc_$i}"
-    if ! has $target_compiler; then
-      continue
-    fi
-    write_c_skeleton
-    if ! do_compiler "$target_compiler" $target_compiler_cflags -o $TMPE $TMPC -static ; then
-      # For host systems we might get away with building without -static
-      if ! do_compiler "$target_compiler" $target_compiler_cflags -o $TMPE $TMPC ; then
-        continue
-      fi
-      echo "CROSS_CC_GUEST_STATIC=y" >> $config_target_mak
-    else
-      echo "CROSS_CC_GUEST_STATIC=y" >> $config_target_mak
-    fi
-    echo "CROSS_CC_GUEST=$target_compiler" >> $config_target_mak
+  if eval test "x\${cross_cc_$arch}" != xyes; then
+      eval "target_compiler=\${cross_cc_$arch}"
 
-    # Test for compiler features for optional tests. We only do this
-    # for cross compilers because ensuring the docker containers based
-    # compilers is a requirememt for adding a new test that needs a
-    # compiler feature.
-    case $target in
-        aarch64-*)
-            if do_compiler "$target_compiler" $target_compiler_cflags \
-               -march=armv8.1-a+sve -o $TMPE $TMPC; then
-                echo "CROSS_CC_HAS_SVE=y" >> $config_target_mak
-            fi
-            if do_compiler "$target_compiler" $target_compiler_cflags \
-               -march=armv8.3-a -o $TMPE $TMPC; then
-                echo "CROSS_CC_HAS_ARMV8_3=y" >> $config_target_mak
-            fi
-            if do_compiler "$target_compiler" $target_compiler_cflags \
-               -mbranch-protection=standard -o $TMPE $TMPC; then
-                echo "CROSS_CC_HAS_ARMV8_BTI=y" >> $config_target_mak
-            fi
-            if do_compiler "$target_compiler" $target_compiler_cflags \
-               -march=armv8.5-a+memtag -o $TMPE $TMPC; then
-                echo "CROSS_CC_HAS_ARMV8_MTE=y" >> $config_target_mak
-            fi
-        ;;
-        ppc*)
-            if do_compiler "$target_compiler" $target_compiler_cflags \
-               -mpower8-vector -o $TMPE $TMPC; then
-                echo "CROSS_CC_HAS_POWER8_VECTOR=y" >> $config_target_mak
-            fi
-        ;;
-        i386-linux-user)
-            if do_compiler "$target_compiler" $target_compiler_cflags \
-                -Werror -fno-pie -o $TMPE $TMPC; then
-                echo "CROSS_CC_HAS_I386_NOPIE=y" >> $config_target_mak
-            fi
-        ;;
-    esac
+      if has $target_compiler; then
+          write_c_skeleton
+          if ! do_compiler "$target_compiler" $target_compiler_cflags \
+                 -o $TMPE $TMPC -static ; then
+              # For host systems we might get away with building without -static
+              if do_compiler "$target_compiler" $target_compiler_cflags \
+                     -o $TMPE $TMPC ; then
+                  got_cross_cc=yes
+                  echo "CROSS_CC_GUEST_STATIC=y" >> $config_target_mak
+                  echo "CROSS_CC_GUEST=$target_compiler" >> $config_target_mak
+              fi
+          else
+              got_cross_cc=yes
+              echo "CROSS_CC_GUEST_STATIC=y" >> $config_target_mak
+              echo "CROSS_CC_GUEST=$target_compiler" >> $config_target_mak
+          fi
+      fi
+  fi
 
-    enabled_cross_compilers="$enabled_cross_compilers $target_compiler"
-    got_cross_cc=yes
-    break
-  done
+  if test $got_cross_cc = yes; then
+      # Test for compiler features for optional tests. We only do this
+      # for cross compilers because ensuring the docker containers based
+      # compilers is a requirememt for adding a new test that needs a
+      # compiler feature.
 
-  if test $got_cross_cc = no && test "$container" != no && test -n "$container_image"; then
+      case $target in
+          aarch64-*)
+              if do_compiler "$target_compiler" $target_compiler_cflags \
+                             -march=armv8.1-a+sve -o $TMPE $TMPC; then
+                  echo "CROSS_CC_HAS_SVE=y" >> $config_target_mak
+              fi
+              if do_compiler "$target_compiler" $target_compiler_cflags \
+                             -march=armv8.3-a -o $TMPE $TMPC; then
+                  echo "CROSS_CC_HAS_ARMV8_3=y" >> $config_target_mak
+              fi
+              if do_compiler "$target_compiler" $target_compiler_cflags \
+                             -mbranch-protection=standard -o $TMPE $TMPC; then
+                  echo "CROSS_CC_HAS_ARMV8_BTI=y" >> $config_target_mak
+              fi
+              if do_compiler "$target_compiler" $target_compiler_cflags \
+                             -march=armv8.5-a+memtag -o $TMPE $TMPC; then
+                  echo "CROSS_CC_HAS_ARMV8_MTE=y" >> $config_target_mak
+              fi
+              ;;
+          ppc*)
+              if do_compiler "$target_compiler" $target_compiler_cflags \
+                             -mpower8-vector -o $TMPE $TMPC; then
+                  echo "CROSS_CC_HAS_POWER8_VECTOR=y" >> $config_target_mak
+              fi
+              ;;
+          i386-linux-user)
+              if do_compiler "$target_compiler" $target_compiler_cflags \
+                             -Werror -fno-pie -o $TMPE $TMPC; then
+                  echo "CROSS_CC_HAS_I386_NOPIE=y" >> $config_target_mak
+              fi
+              ;;
+      esac
+  elif test $got_cross_cc = no && test "$container" != no && \
+          test -n "$container_image"; then
       for host in $container_hosts; do
           if test "$host" = "$ARCH"; then
               echo "DOCKER_IMAGE=$container_image" >> $config_target_mak
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH v2 10/30] tests/docker: Added libbpf library to the docker files.
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (8 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 09/30] tests/tcg: don't iterate through other arch compilers Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 11/30] tests/tcg: Add docker_as and docker_ld cmds Alex Bennée
                   ` (20 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, Andrew Melnychenko, berrange, f4bug,
	Wainer dos Santos Moschetta, Willian Rampazzo, stefanha, crosa,
	Thomas Huth, pbonzini, Alex Bennée, aurelien

From: Andrew Melnychenko <andrew@daynix.com>

The series of patches for eBPF RSS adds libbpf dependency for qemu.
https://lists.gnu.org/archive/html/qemu-devel/2021-03/msg08887.html

With this patch, libbpf added:
  Alpine - added libbpf-dev
  Centos 8 - added libbpf-devel
  Fedora - added libbpf-devel

Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210406082947.672708-2-andrew@daynix.com>
---
 tests/docker/dockerfiles/alpine.docker  | 1 +
 tests/docker/dockerfiles/centos8.docker | 1 +
 tests/docker/dockerfiles/fedora.docker  | 1 +
 3 files changed, 3 insertions(+)

diff --git a/tests/docker/dockerfiles/alpine.docker b/tests/docker/dockerfiles/alpine.docker
index d63a269aef..998a7584ed 100644
--- a/tests/docker/dockerfiles/alpine.docker
+++ b/tests/docker/dockerfiles/alpine.docker
@@ -19,6 +19,7 @@ ENV PACKAGES \
 	gnutls-dev \
 	gtk+3.0-dev \
 	libaio-dev \
+	libbpf-dev \
 	libcap-ng-dev \
 	libjpeg-turbo-dev \
 	libnfs-dev \
diff --git a/tests/docker/dockerfiles/centos8.docker b/tests/docker/dockerfiles/centos8.docker
index a8c6c528b0..efc1349cc8 100644
--- a/tests/docker/dockerfiles/centos8.docker
+++ b/tests/docker/dockerfiles/centos8.docker
@@ -14,6 +14,7 @@ ENV PACKAGES \
     git \
     glib2-devel \
     libaio-devel \
+    libbpf-devel \
     libepoxy-devel \
     libfdt-devel \
     libgcrypt-devel \
diff --git a/tests/docker/dockerfiles/fedora.docker b/tests/docker/dockerfiles/fedora.docker
index 915fdc1845..483f2d9f83 100644
--- a/tests/docker/dockerfiles/fedora.docker
+++ b/tests/docker/dockerfiles/fedora.docker
@@ -32,6 +32,7 @@ ENV PACKAGES \
     libcurl-devel \
     libepoxy-devel \
     libfdt-devel \
+    libbpf-devel \
     libiscsi-devel \
     libjpeg-devel \
     libpmem-devel \
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 11/30] tests/tcg: Add docker_as and docker_ld cmds
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (9 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 10/30] tests/docker: Added libbpf library to the docker files Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 12/30] tests/tcg: Run timeout cmds using --foreground Alex Bennée
                   ` (19 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, Bastian Koppelmann, f4bug, stefanha, crosa,
	pbonzini, Alex Bennée, aurelien

From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

At least for the TriCore target no easily available c compiler exists.
Thus we need to rely on "as" and "ld". This allows us to run them
through the docker image. We don't test the generation capabilities of
docker images as they are assumed to work.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
[AJB: fix quoting, only handle docker & clear, test -n, tweak commit msg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

---
v2
  - only pass down AS/LD if defined
---
 tests/tcg/Makefile.qemu | 17 +++++++++++++++++
 tests/tcg/configure.sh  | 17 ++++++++++++++++-
 2 files changed, 33 insertions(+), 1 deletion(-)

diff --git a/tests/tcg/Makefile.qemu b/tests/tcg/Makefile.qemu
index a56564660c..84c8543878 100644
--- a/tests/tcg/Makefile.qemu
+++ b/tests/tcg/Makefile.qemu
@@ -22,6 +22,8 @@ quiet-@ = $(if $(V),,@)
 quiet-command = $(quiet-@)$(call quiet-command-run,$1,$2,$3)
 
 CROSS_CC_GUEST:=
+CROSS_AS_GUEST:=
+CROSS_LD_GUEST:=
 DOCKER_IMAGE:=
 
 -include tests/tcg/config-$(TARGET).mak
@@ -42,6 +44,8 @@ cross-build-guest-tests:
 	$(call quiet-command, \
 	   (mkdir -p tests/tcg/$(TARGET) && cd tests/tcg/$(TARGET) && \
 	    $(MAKE) -f $(TCG_MAKE) TARGET="$(TARGET)" CC="$(CROSS_CC_GUEST)" \
+			$(if $(CROSS_AS_GUEST),AS="$(CROSS_AS_GUEST)") \
+			$(if $(CROSS_LD_GUEST),LD="$(CROSS_LD_GUEST)") \
 			SRC_PATH="$(SRC_PATH)" BUILD_STATIC=$(CROSS_CC_GUEST_STATIC) \
 			EXTRA_CFLAGS="$(CROSS_CC_GUEST_CFLAGS)"), \
 	"BUILD","$(TARGET) guest-tests with $(CROSS_CC_GUEST)")
@@ -59,11 +63,24 @@ DOCKER_COMPILE_CMD="$(DOCKER_SCRIPT) cc \
 		-i qemu/$(DOCKER_IMAGE) \
 		-s $(SRC_PATH) -- "
 
+DOCKER_AS_CMD=$(if $(DOCKER_CROSS_AS_GUEST),"$(DOCKER_SCRIPT) cc \
+		--cc $(DOCKER_CROSS_AS_GUEST) \
+		-i qemu/$(DOCKER_IMAGE) \
+		-s $(SRC_PATH) -- ")
+
+DOCKER_LD_CMD=$(if $(DOCKER_CROSS_LD_GUEST),"$(DOCKER_SCRIPT) cc \
+		--cc $(DOCKER_CROSS_LD_GUEST) \
+		-i qemu/$(DOCKER_IMAGE) \
+		-s $(SRC_PATH) -- ")
+
+
 .PHONY: docker-build-guest-tests
 docker-build-guest-tests: docker-image-$(DOCKER_IMAGE)
 	$(call quiet-command, \
 	  (mkdir -p tests/tcg/$(TARGET) && cd tests/tcg/$(TARGET) && \
 	   $(MAKE) -f $(TCG_MAKE) TARGET="$(TARGET)" CC=$(DOCKER_COMPILE_CMD) \
+			$(if $(DOCKER_AS_CMD),AS=$(DOCKER_AS_CMD)) \
+			$(if $(DOCKER_LD_CMD),LD=$(DOCKER_LD_CMD)) \
 			SRC_PATH="$(SRC_PATH)" BUILD_STATIC=y \
 			EXTRA_CFLAGS="$(CROSS_CC_GUEST_CFLAGS)"), \
 	"BUILD","$(TARGET) guest-tests with docker qemu/$(DOCKER_IMAGE)")
diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh
index e6c1be5450..ed378e7840 100755
--- a/tests/tcg/configure.sh
+++ b/tests/tcg/configure.sh
@@ -75,7 +75,13 @@ fi
 for target in $target_list; do
   arch=${target%%-*}
 
+  # reset all container fields
   container_image=
+  container_hosts=
+  container_cross_cc=
+  container_cross_as=
+  container_cross_ld=
+
   case $target in
     aarch64-*)
       # We don't have any bigendian build tools so we only use this for AArch64
@@ -273,7 +279,16 @@ for target in $target_list; do
       for host in $container_hosts; do
           if test "$host" = "$ARCH"; then
               echo "DOCKER_IMAGE=$container_image" >> $config_target_mak
-              echo "DOCKER_CROSS_CC_GUEST=$container_cross_cc" >> $config_target_mak
+              echo "DOCKER_CROSS_CC_GUEST=$container_cross_cc" >> \
+                   $config_target_mak
+              if test -n "$container_cross_as"; then
+                  echo "DOCKER_CROSS_AS_GUEST=$container_cross_as" >> \
+                      $config_target_mak
+              fi
+              if test -n "$container_cross_ld"; then
+                  echo "DOCKER_CROSS_LD_GUEST=$container_cross_ld" >> \
+                      $config_target_mak
+              fi
           fi
       done
   fi
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 12/30] tests/tcg: Run timeout cmds using --foreground
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (10 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 11/30] tests/tcg: Add docker_as and docker_ld cmds Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 13/30] hw/tricore: Add testdevice for tests in tests/tcg/ Alex Bennée
                   ` (18 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, Bastian Koppelmann, f4bug, stefanha, crosa,
	pbonzini, Alex Bennée, aurelien

From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

when trying to run successful short tests from the Makefile timeout would not
terminate. Rather it would wait until the time runs out. Excerpt from the
manpage:

--foreground
    when not running timeout directly from a shell prompt,
    allow COMMAND to read from the TTY and get TTY signals; in this mode, chil‐
    dren of COMMAND will not be timed out

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-3-kbastian@mail.uni-paderborn.de>
---
 tests/tcg/Makefile.target | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/tests/tcg/Makefile.target b/tests/tcg/Makefile.target
index cab8c6b3a2..b29fae4630 100644
--- a/tests/tcg/Makefile.target
+++ b/tests/tcg/Makefile.target
@@ -43,9 +43,10 @@ quiet-command = $(if $(V),$1,$(if $(2),@printf "  %-7s %s\n" $2 $3 && $1, @$1))
 
 # $1 = test name, $2 = cmd, $3 = desc
 ifdef CONFIG_USER_ONLY
-run-test = $(call quiet-command, timeout $(TIMEOUT) $2 > $1.out,"TEST",$3)
+run-test = $(call quiet-command, timeout --foreground $(TIMEOUT) $2 > $1.out, \
+	"TEST",$3)
 else
-run-test = $(call quiet-command, timeout $(TIMEOUT) $2,"TEST",$3)
+run-test = $(call quiet-command, timeout --foreground $(TIMEOUT) $2,"TEST",$3)
 endif
 
 # $1 = test name, $2 = reference
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 13/30] hw/tricore: Add testdevice for tests in tests/tcg/
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (11 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 12/30] tests/tcg: Run timeout cmds using --foreground Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 14/30] tests/tcg/tricore: Add build infrastructure Alex Bennée
                   ` (17 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, Bastian Koppelmann, f4bug, stefanha, crosa,
	pbonzini, Alex Bennée, aurelien

From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

this device is used to verify the correctness of regression tests by
allowing guests to write their exit status to this device. This is then
used by qemu to exit using the written status.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-4-kbastian@mail.uni-paderborn.de>
---
 include/hw/tricore/tricore_testdevice.h | 38 ++++++++++++
 hw/tricore/tricore_testboard.c          |  8 +++
 hw/tricore/tricore_testdevice.c         | 82 +++++++++++++++++++++++++
 hw/tricore/meson.build                  |  1 +
 4 files changed, 129 insertions(+)
 create mode 100644 include/hw/tricore/tricore_testdevice.h
 create mode 100644 hw/tricore/tricore_testdevice.c

diff --git a/include/hw/tricore/tricore_testdevice.h b/include/hw/tricore/tricore_testdevice.h
new file mode 100644
index 0000000000..2c56c51bcb
--- /dev/null
+++ b/include/hw/tricore/tricore_testdevice.h
@@ -0,0 +1,38 @@
+/*
+ *  Copyright (c) 2018-2021  Bastian Koppelmann Paderborn University
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifndef HW_TRICORE_TESTDEV_H
+#define HW_TRICORE_TESTDEV_H
+
+#include "hw/sysbus.h"
+#include "hw/hw.h"
+
+#define TYPE_TRICORE_TESTDEVICE "tricore_testdevice"
+#define TRICORE_TESTDEVICE(obj) \
+    OBJECT_CHECK(TriCoreTestDeviceState, (obj), TYPE_TRICORE_TESTDEVICE)
+
+typedef struct {
+    /* <private> */
+    SysBusDevice parent_obj;
+
+    /* <public> */
+    MemoryRegion iomem;
+
+} TriCoreTestDeviceState;
+
+#endif
diff --git a/hw/tricore/tricore_testboard.c b/hw/tricore/tricore_testboard.c
index 12ea1490fd..9791986a3e 100644
--- a/hw/tricore/tricore_testboard.c
+++ b/hw/tricore/tricore_testboard.c
@@ -28,6 +28,7 @@
 #include "exec/address-spaces.h"
 #include "elf.h"
 #include "hw/tricore/tricore.h"
+#include "hw/tricore/tricore_testdevice.h"
 #include "qemu/error-report.h"
 
 
@@ -57,6 +58,7 @@ static void tricore_testboard_init(MachineState *machine, int board_id)
 {
     TriCoreCPU *cpu;
     CPUTriCoreState *env;
+    TriCoreTestDeviceState *test_dev;
 
     MemoryRegion *sysmem = get_system_memory();
     MemoryRegion *ext_cram = g_new(MemoryRegion, 1);
@@ -88,6 +90,12 @@ static void tricore_testboard_init(MachineState *machine, int board_id)
     memory_region_add_subregion(sysmem, 0xf0050000, pcp_data);
     memory_region_add_subregion(sysmem, 0xf0060000, pcp_text);
 
+    test_dev = g_new(TriCoreTestDeviceState, 1);
+    object_initialize(test_dev, sizeof(TriCoreTestDeviceState),
+                      TYPE_TRICORE_TESTDEVICE);
+    memory_region_add_subregion(sysmem, 0xf0000000, &test_dev->iomem);
+
+
     tricoretb_binfo.ram_size = machine->ram_size;
     tricoretb_binfo.kernel_filename = machine->kernel_filename;
 
diff --git a/hw/tricore/tricore_testdevice.c b/hw/tricore/tricore_testdevice.c
new file mode 100644
index 0000000000..a1563aa568
--- /dev/null
+++ b/hw/tricore/tricore_testdevice.c
@@ -0,0 +1,82 @@
+/*
+ *  Copyright (c) 2018-2021 Bastian Koppelmann Paderborn University
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/sysbus.h"
+#include "hw/qdev-properties.h"
+#include "hw/tricore/tricore_testdevice.h"
+
+static void tricore_testdevice_write(void *opaque, hwaddr offset,
+                                      uint64_t value, unsigned size)
+{
+    exit(value);
+}
+
+static uint64_t tricore_testdevice_read(void *opaque, hwaddr offset,
+                                         unsigned size)
+{
+    return 0xdeadbeef;
+}
+
+static void tricore_testdevice_reset(DeviceState *dev)
+{
+}
+
+static const MemoryRegionOps tricore_testdevice_ops = {
+    .read = tricore_testdevice_read,
+    .write = tricore_testdevice_write,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    },
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void tricore_testdevice_init(Object *obj)
+{
+    TriCoreTestDeviceState *s = TRICORE_TESTDEVICE(obj);
+   /* map memory */
+    memory_region_init_io(&s->iomem, OBJECT(s), &tricore_testdevice_ops, s,
+                          "tricore_testdevice", 0x4);
+}
+
+static Property tricore_testdevice_properties[] = {
+    DEFINE_PROP_END_OF_LIST()
+};
+
+static void tricore_testdevice_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    device_class_set_props(dc, tricore_testdevice_properties);
+    dc->reset = tricore_testdevice_reset;
+}
+
+static const TypeInfo tricore_testdevice_info = {
+    .name          = TYPE_TRICORE_TESTDEVICE,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(TriCoreTestDeviceState),
+    .instance_init = tricore_testdevice_init,
+    .class_init    = tricore_testdevice_class_init,
+};
+
+static void tricore_testdevice_register_types(void)
+{
+    type_register_static(&tricore_testdevice_info);
+}
+
+type_init(tricore_testdevice_register_types)
diff --git a/hw/tricore/meson.build b/hw/tricore/meson.build
index 77ff6fd137..47e36bb077 100644
--- a/hw/tricore/meson.build
+++ b/hw/tricore/meson.build
@@ -1,5 +1,6 @@
 tricore_ss = ss.source_set()
 tricore_ss.add(when: 'CONFIG_TRICORE', if_true: files('tricore_testboard.c'))
+tricore_ss.add(when: 'CONFIG_TRICORE', if_true: files('tricore_testdevice.c'))
 tricore_ss.add(when: 'CONFIG_TRIBOARD', if_true: files('triboard.c'))
 tricore_ss.add(when: 'CONFIG_TC27X_SOC', if_true: files('tc27x_soc.c'))
 
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 14/30] tests/tcg/tricore: Add build infrastructure
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (12 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 13/30] hw/tricore: Add testdevice for tests in tests/tcg/ Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 15/30] configure: Emit HOST_CC to config-host.mak Alex Bennée
                   ` (16 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, Bastian Koppelmann, f4bug, stefanha, crosa,
	pbonzini, Alex Bennée, aurelien

From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

this includes the Makefile and linker script to build all the tests.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-5-kbastian@mail.uni-paderborn.de>
---
 MAINTAINERS                               |  1 +
 tests/tcg/tricore/Makefile.softmmu-target | 15 ++++++
 tests/tcg/tricore/link.ld                 | 60 +++++++++++++++++++++++
 3 files changed, 76 insertions(+)
 create mode 100644 tests/tcg/tricore/Makefile.softmmu-target
 create mode 100644 tests/tcg/tricore/link.ld

diff --git a/MAINTAINERS b/MAINTAINERS
index fc0b429b45..4d3727cad5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -378,6 +378,7 @@ S: Maintained
 F: target/tricore/
 F: hw/tricore/
 F: include/hw/tricore/
+F: tests/tcg/tricore/
 
 Multiarch Linux User Tests
 M: Alex Bennée <alex.bennee@linaro.org>
diff --git a/tests/tcg/tricore/Makefile.softmmu-target b/tests/tcg/tricore/Makefile.softmmu-target
new file mode 100644
index 0000000000..d64a99b95f
--- /dev/null
+++ b/tests/tcg/tricore/Makefile.softmmu-target
@@ -0,0 +1,15 @@
+TESTS_PATH = $(SRC_PATH)/tests/tcg/tricore
+
+LDFLAGS = -T$(TESTS_PATH)/link.ld
+ASFLAGS =
+
+QEMU_OPTS += -M tricore_testboard -nographic -kernel
+
+%.pS: $(TESTS_PATH)/%.S
+	$(HOST_CC) -E -o $@ $<
+
+%.o: %.pS
+	$(AS) $(ASFLAGS) -o $@ $<
+
+%.tst: %.o
+	$(LD) $(LDFLAGS) $< -o $@
diff --git a/tests/tcg/tricore/link.ld b/tests/tcg/tricore/link.ld
new file mode 100644
index 0000000000..364bcdc00a
--- /dev/null
+++ b/tests/tcg/tricore/link.ld
@@ -0,0 +1,60 @@
+/* Default linker script, for normal executables */
+OUTPUT_FORMAT("elf32-tricore")
+OUTPUT_ARCH(tricore)
+ENTRY(_start)
+
+/* the internal ram description */
+MEMORY
+{
+  text_ram (rx!p): org = 0x80000000, len = 15K
+  data_ram (w!xp): org = 0xd0000000, len = 130K
+}
+/*
+ * Define the sizes of the user and system stacks.
+ */
+__USTACK_SIZE = DEFINED (__USTACK_SIZE) ? __USTACK_SIZE : 1K ;
+/*
+ * Define the start address and the size of the context save area.
+ */
+__CSA_BEGIN =  0xd0000000 ;
+__CSA_SIZE =  8k ;
+__CSA_END = __CSA_BEGIN + __CSA_SIZE ;
+
+SECTIONS
+{
+  .text  :
+  {
+    *(.text)
+    . = ALIGN(8);
+  } > text_ram
+
+  .rodata :
+  {
+    *(.rodata)
+    *(.rodata1)
+  } > data_ram
+
+  .data :
+  {
+    . = ALIGN(8) ;
+    *(.data)
+    *(.data.*)
+    . = ALIGN(8) ;
+    __USTACK = . + __USTACK_SIZE -768;
+
+  } > data_ram
+  /*
+   * Allocate space for BSS sections.
+   */
+  .bss  :
+  {
+    BSS_BASE = . ;
+    *(.bss)
+    *(COMMON)
+    . = ALIGN(8) ;
+  } > data_ram
+  /* Make sure CSA, stack and heap addresses are properly aligned.  */
+  _. = ASSERT ((__CSA_BEGIN & 0x3f) == 0 , "illegal CSA start address") ;
+  _. = ASSERT ((__CSA_SIZE & 0x3f) == 0 , "illegal CSA size") ;
+
+}
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 15/30] configure: Emit HOST_CC to config-host.mak
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (13 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 14/30] tests/tcg/tricore: Add build infrastructure Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 16/30] tests/tcg/tricore: Add macros to create tests and first test 'abs' Alex Bennée
                   ` (15 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, Bastian Koppelmann, f4bug, stefanha, crosa,
	pbonzini, Alex Bennée, aurelien

From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

this is needed by the tricore-tcg-tests as tricore-gcc is not easily
available. Thus we rely on the HOST_CC to do the preprocessing of the
tricore assembly files.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-6-kbastian@mail.uni-paderborn.de>
---
 configure | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configure b/configure
index 4f374b4889..bb86c72479 100755
--- a/configure
+++ b/configure
@@ -6139,6 +6139,7 @@ echo "GENISOIMAGE=$genisoimage" >> $config_host_mak
 echo "MESON=$meson" >> $config_host_mak
 echo "NINJA=$ninja" >> $config_host_mak
 echo "CC=$cc" >> $config_host_mak
+echo "HOST_CC=$host_cc" >> $config_host_mak
 if $iasl -h > /dev/null 2>&1; then
   echo "CONFIG_IASL=$iasl" >> $config_host_mak
 fi
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH v2 16/30] tests/tcg/tricore: Add macros to create tests and first test 'abs'
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (14 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 15/30] configure: Emit HOST_CC to config-host.mak Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 17/30] tests/tcg/tricore: Add bmerge test Alex Bennée
                   ` (14 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, Bastian Koppelmann, f4bug, stefanha, crosa,
	pbonzini, Alex Bennée, aurelien

From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

This kind of tests is inspired by the riscv-tests repository. This adds
macros that makes it easy to create single instruction self containing
tests.

It is achieved by macros that create a test sequence for an
instruction and check for a supplied correct value. If the value is correct the
next instruction is tested. Otherwise we jump to fail handler that writes is
test number as a status code back to qemu that then exits on that status code.
If all tests pass we write back 0 as a status code and exit.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20210305170045.869437-7-kbastian@mail.uni-paderborn.de>
[AJB: add container_hosts]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
 tests/tcg/tricore/macros.h                | 53 +++++++++++++++++++++++
 tests/tcg/configure.sh                    |  6 +++
 tests/tcg/tricore/Makefile.softmmu-target |  2 +
 tests/tcg/tricore/test_abs.S              |  7 +++
 4 files changed, 68 insertions(+)
 create mode 100644 tests/tcg/tricore/macros.h
 create mode 100644 tests/tcg/tricore/test_abs.S

diff --git a/tests/tcg/tricore/macros.h b/tests/tcg/tricore/macros.h
new file mode 100644
index 0000000000..76c133132a
--- /dev/null
+++ b/tests/tcg/tricore/macros.h
@@ -0,0 +1,53 @@
+/* Helpers */
+#define LI(reg, val)           \
+    mov.u reg, lo:val;         \
+    movh DREG_TEMP_LI, up:val; \
+    or reg, reg, DREG_TEMP_LI; \
+
+/* Address definitions */
+#define TESTDEV_ADDR 0xf0000000
+/* Register definitions */
+#define DREG_RS1 %d0
+#define DREG_CALC_RESULT %d1
+#define DREG_TEMP_LI %d10
+#define DREG_TEMP %d11
+#define DREG_TEST_NUM %d14
+#define DREG_CORRECT_RESULT %d15
+
+#define DREG_DEV_ADDR %a15
+
+/* Test case wrappers */
+#define TEST_CASE(num, testreg, correct, code...) \
+test_ ## num:                                     \
+    code;                                         \
+    LI(DREG_CORRECT_RESULT, correct)              \
+    mov DREG_TEST_NUM, num;                       \
+    jne testreg, DREG_CORRECT_RESULT, fail        \
+
+/* Actual test case type
+ * e.g inst %dX, %dY      -> TEST_D_D
+ *     inst %dX, %dY, %dZ -> TEST_D_DD
+ *     inst %eX, %dY, %dZ -> TEST_E_DD
+ */
+#define TEST_D_D(insn, num, result, rs1)      \
+    TEST_CASE(num, DREG_CALC_RESULT, result,  \
+    LI(DREG_RS1, rs1);                        \
+    insn DREG_CALC_RESULT, DREG_RS1;          \
+    )
+
+/* Pass/Fail handling part */
+#define TEST_PASSFAIL                       \
+        j pass;                             \
+fail:                                       \
+        LI(DREG_TEMP, TESTDEV_ADDR)         \
+        mov.a DREG_DEV_ADDR, DREG_TEMP;     \
+        st.w [DREG_DEV_ADDR], DREG_TEST_NUM;\
+        debug;                              \
+        j fail;                             \
+pass:                                       \
+        LI(DREG_TEMP, TESTDEV_ADDR)         \
+        mov.a DREG_DEV_ADDR, DREG_TEMP;     \
+        mov DREG_TEST_NUM, 0;               \
+        st.w [DREG_DEV_ADDR], DREG_TEST_NUM;\
+        debug;                              \
+        j pass;
diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh
index ed378e7840..11009fe433 100755
--- a/tests/tcg/configure.sh
+++ b/tests/tcg/configure.sh
@@ -180,6 +180,12 @@ for target in $target_list; do
       container_image=debian-sparc64-cross
       container_cross_cc=sparc64-linux-gnu-gcc
       ;;
+    tricore-softmmu)
+      container_hosts=x86_64
+      container_image=debian-tricore-cross
+      container_cross_as=tricore-as
+      container_cross_ld=tricore-ld
+      ;;
     x86_64-*)
       container_hosts="aarch64 ppc64el x86_64"
       container_image=debian-amd64-cross
diff --git a/tests/tcg/tricore/Makefile.softmmu-target b/tests/tcg/tricore/Makefile.softmmu-target
index d64a99b95f..3b048e49fa 100644
--- a/tests/tcg/tricore/Makefile.softmmu-target
+++ b/tests/tcg/tricore/Makefile.softmmu-target
@@ -3,6 +3,8 @@ TESTS_PATH = $(SRC_PATH)/tests/tcg/tricore
 LDFLAGS = -T$(TESTS_PATH)/link.ld
 ASFLAGS =
 
+TESTS += test_abs.tst
+
 QEMU_OPTS += -M tricore_testboard -nographic -kernel
 
 %.pS: $(TESTS_PATH)/%.S
diff --git a/tests/tcg/tricore/test_abs.S b/tests/tcg/tricore/test_abs.S
new file mode 100644
index 0000000000..e42240159a
--- /dev/null
+++ b/tests/tcg/tricore/test_abs.S
@@ -0,0 +1,7 @@
+#include "macros.h"
+.text
+.global _start
+_start:
+    TEST_D_D(abs, 1, 0, 0)
+
+    TEST_PASSFAIL
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 17/30] tests/tcg/tricore: Add bmerge test
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (15 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 16/30] tests/tcg/tricore: Add macros to create tests and first test 'abs' Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 18/30] tests/tcg/tricore: Add clz test Alex Bennée
                   ` (13 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, Bastian Koppelmann, f4bug, stefanha, crosa,
	pbonzini, Alex Bennée, aurelien

From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-8-kbastian@mail.uni-paderborn.de>
---
 tests/tcg/tricore/macros.h                | 24 +++++++++++++++++++++++
 tests/tcg/tricore/Makefile.softmmu-target |  1 +
 tests/tcg/tricore/test_bmerge.S           |  8 ++++++++
 3 files changed, 33 insertions(+)
 create mode 100644 tests/tcg/tricore/test_bmerge.S

diff --git a/tests/tcg/tricore/macros.h b/tests/tcg/tricore/macros.h
index 76c133132a..52aa936c56 100644
--- a/tests/tcg/tricore/macros.h
+++ b/tests/tcg/tricore/macros.h
@@ -8,7 +8,10 @@
 #define TESTDEV_ADDR 0xf0000000
 /* Register definitions */
 #define DREG_RS1 %d0
+#define DREG_RS2 %d1
 #define DREG_CALC_RESULT %d1
+#define DREG_CALC_PSW %d2
+#define DREG_CORRECT_PSW %d3
 #define DREG_TEMP_LI %d10
 #define DREG_TEMP %d11
 #define DREG_TEST_NUM %d14
@@ -24,6 +27,17 @@ test_ ## num:                                     \
     mov DREG_TEST_NUM, num;                       \
     jne testreg, DREG_CORRECT_RESULT, fail        \
 
+#define TEST_CASE_PSW(num, testreg, correct, correct_psw, code...) \
+test_ ## num:                                                      \
+    code;                                                          \
+    LI(DREG_CORRECT_RESULT, correct)                               \
+    mov DREG_TEST_NUM, num;                                        \
+    jne testreg, DREG_CORRECT_RESULT, fail;                        \
+    mfcr DREG_CALC_PSW, $psw;                                      \
+    LI(DREG_CORRECT_PSW, correct_psw)                              \
+    mov DREG_TEST_NUM, num;                                        \
+    jne DREG_CALC_PSW, DREG_CORRECT_PSW, fail;
+
 /* Actual test case type
  * e.g inst %dX, %dY      -> TEST_D_D
  *     inst %dX, %dY, %dZ -> TEST_D_DD
@@ -35,6 +49,16 @@ test_ ## num:                                     \
     insn DREG_CALC_RESULT, DREG_RS1;          \
     )
 
+#define TEST_D_DD_PSW(insn, num, result, psw, rs1, rs2) \
+    TEST_CASE_PSW(num, DREG_CALC_RESULT, result, psw,   \
+    LI(DREG_RS1, rs1);                                  \
+    LI(DREG_RS2, rs2);                                  \
+    rstv;                                               \
+    insn DREG_CALC_RESULT, DREG_RS1, DREG_RS2;          \
+    )
+
+
+
 /* Pass/Fail handling part */
 #define TEST_PASSFAIL                       \
         j pass;                             \
diff --git a/tests/tcg/tricore/Makefile.softmmu-target b/tests/tcg/tricore/Makefile.softmmu-target
index 3b048e49fa..de6a2cc88e 100644
--- a/tests/tcg/tricore/Makefile.softmmu-target
+++ b/tests/tcg/tricore/Makefile.softmmu-target
@@ -4,6 +4,7 @@ LDFLAGS = -T$(TESTS_PATH)/link.ld
 ASFLAGS =
 
 TESTS += test_abs.tst
+TESTS += test_bmerge.tst
 
 QEMU_OPTS += -M tricore_testboard -nographic -kernel
 
diff --git a/tests/tcg/tricore/test_bmerge.S b/tests/tcg/tricore/test_bmerge.S
new file mode 100644
index 0000000000..8a0fa6d3f6
--- /dev/null
+++ b/tests/tcg/tricore/test_bmerge.S
@@ -0,0 +1,8 @@
+#include "macros.h"
+.text
+.global _start
+_start:
+    TEST_D_DD_PSW(bmerge, 1, 0x555557f7, 0x00000b80, 0x0000001d, 0x0000ffff)
+
+    TEST_PASSFAIL
+
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 18/30] tests/tcg/tricore: Add clz test
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (16 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 17/30] tests/tcg/tricore: Add bmerge test Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 19/30] tests/tcg/tricore: Add dvstep test Alex Bennée
                   ` (12 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, Bastian Koppelmann, f4bug, stefanha, crosa,
	pbonzini, Alex Bennée, aurelien

From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
[AJB: dropped duplicate Makefile]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-9-kbastian@mail.uni-paderborn.de>
---
 tests/tcg/tricore/Makefile.softmmu-target | 1 +
 tests/tcg/tricore/test_clz.S              | 9 +++++++++
 2 files changed, 10 insertions(+)
 create mode 100644 tests/tcg/tricore/test_clz.S

diff --git a/tests/tcg/tricore/Makefile.softmmu-target b/tests/tcg/tricore/Makefile.softmmu-target
index de6a2cc88e..a9b81545e2 100644
--- a/tests/tcg/tricore/Makefile.softmmu-target
+++ b/tests/tcg/tricore/Makefile.softmmu-target
@@ -5,6 +5,7 @@ ASFLAGS =
 
 TESTS += test_abs.tst
 TESTS += test_bmerge.tst
+TESTS += test_clz.tst
 
 QEMU_OPTS += -M tricore_testboard -nographic -kernel
 
diff --git a/tests/tcg/tricore/test_clz.S b/tests/tcg/tricore/test_clz.S
new file mode 100644
index 0000000000..e03835f123
--- /dev/null
+++ b/tests/tcg/tricore/test_clz.S
@@ -0,0 +1,9 @@
+#include "macros.h"
+.text
+.global _start
+_start:
+    TEST_D_D(cls.h, 1, 0x0, 0x6db17976)
+    TEST_D_D(cls.h, 2, 0x000f000f, 0x0)
+
+    TEST_PASSFAIL
+
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 19/30] tests/tcg/tricore: Add dvstep test
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (17 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 18/30] tests/tcg/tricore: Add clz test Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 20/30] tests/tcg/tricore: Add fadd test Alex Bennée
                   ` (11 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, Bastian Koppelmann, f4bug, stefanha, crosa,
	pbonzini, Alex Bennée, aurelien

From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-10-kbastian@mail.uni-paderborn.de>
---
 tests/tcg/tricore/macros.h                | 29 ++++++++++++++++++++++-
 tests/tcg/tricore/Makefile.softmmu-target |  1 +
 tests/tcg/tricore/test_dvstep.S           | 15 ++++++++++++
 3 files changed, 44 insertions(+), 1 deletion(-)
 create mode 100644 tests/tcg/tricore/test_dvstep.S

diff --git a/tests/tcg/tricore/macros.h b/tests/tcg/tricore/macros.h
index 52aa936c56..59b4b9a352 100644
--- a/tests/tcg/tricore/macros.h
+++ b/tests/tcg/tricore/macros.h
@@ -19,6 +19,18 @@
 
 #define DREG_DEV_ADDR %a15
 
+#define EREG_RS1 %e6
+#define EREG_RS1_LO %d6
+#define EREG_RS1_HI %d7
+#define EREG_RS2 %e8
+#define EREG_RS2_LO %d8
+#define EREG_RS2_HI %d9
+#define EREG_CALC_RESULT %e8
+#define EREG_CALC_RESULT_HI %d9
+#define EREG_CALC_RESULT_LO %d8
+#define EREG_CORRECT_RESULT_LO %d0
+#define EREG_CORRECT_RESULT_HI %d1
+
 /* Test case wrappers */
 #define TEST_CASE(num, testreg, correct, code...) \
 test_ ## num:                                     \
@@ -27,6 +39,15 @@ test_ ## num:                                     \
     mov DREG_TEST_NUM, num;                       \
     jne testreg, DREG_CORRECT_RESULT, fail        \
 
+#define TEST_CASE_E(num, correct_lo, correct_hi, code...)  \
+test_ ## num:                                              \
+    code;                                                  \
+    mov DREG_TEST_NUM, num;                                \
+    LI(EREG_CORRECT_RESULT_LO, correct_lo)                 \
+    jne EREG_CALC_RESULT_LO, EREG_CORRECT_RESULT_LO, fail; \
+    LI(EREG_CORRECT_RESULT_HI, correct_hi)                 \
+    jne EREG_CALC_RESULT_HI, EREG_CORRECT_RESULT_HI, fail;
+
 #define TEST_CASE_PSW(num, testreg, correct, correct_psw, code...) \
 test_ ## num:                                                      \
     code;                                                          \
@@ -57,7 +78,13 @@ test_ ## num:                                                      \
     insn DREG_CALC_RESULT, DREG_RS1, DREG_RS2;          \
     )
 
-
+#define TEST_E_ED(insn, num, res_hi, res_lo, rs1_hi, rs1_lo, rs2) \
+    TEST_CASE_E(num, res_lo, res_hi,                              \
+    LI(EREG_RS1_LO, rs1_lo);                                      \
+    LI(EREG_RS1_HI, rs1_hi);                                      \
+    LI(DREG_RS2, rs2);                                            \
+    insn EREG_CALC_RESULT, EREG_RS1, DREG_RS2;                    \
+    )
 
 /* Pass/Fail handling part */
 #define TEST_PASSFAIL                       \
diff --git a/tests/tcg/tricore/Makefile.softmmu-target b/tests/tcg/tricore/Makefile.softmmu-target
index a9b81545e2..799b51191e 100644
--- a/tests/tcg/tricore/Makefile.softmmu-target
+++ b/tests/tcg/tricore/Makefile.softmmu-target
@@ -6,6 +6,7 @@ ASFLAGS =
 TESTS += test_abs.tst
 TESTS += test_bmerge.tst
 TESTS += test_clz.tst
+TESTS += test_dvstep.tst
 
 QEMU_OPTS += -M tricore_testboard -nographic -kernel
 
diff --git a/tests/tcg/tricore/test_dvstep.S b/tests/tcg/tricore/test_dvstep.S
new file mode 100644
index 0000000000..858dbc62dd
--- /dev/null
+++ b/tests/tcg/tricore/test_dvstep.S
@@ -0,0 +1,15 @@
+#include "macros.h"
+.text
+.global _start
+_start:
+    #                              Result                   RS1            RS2
+    TEST_E_ED(dvstep,   1, 0x000001ff, 0xfffe5cff, 0x00000001, 0xfffffe5c, 0x0)
+    TEST_E_ED(dvstep,   2, 0x00000000, 0x000000ff, 0x00000000, 0x00000000, 0x0)
+    TEST_E_ED(dvstep,   3, 0x0000f000, 0x000000fd, 0x010000f0, 0x00000000, 0x0)
+    TEST_E_ED(dvstep,   4, 0xfffff000, 0x00000000, 0x7ffffff0, 0x00000000, 0x0)
+    TEST_E_ED(dvstep.u, 5, 0xffffff00, 0x100008ff, 0xffffffff, 0x00100008, 0x0)
+    TEST_E_ED(dvstep.u, 6, 0x00000100, 0x00000000, 0x08000001, 0x00000000, \
+                           0xffffff2d)
+
+    TEST_PASSFAIL
+
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 20/30] tests/tcg/tricore: Add fadd test
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (18 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 19/30] tests/tcg/tricore: Add dvstep test Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 21/30] tests/tcg/tricore: Add fmul test Alex Bennée
                   ` (10 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, Bastian Koppelmann, f4bug, stefanha, crosa,
	pbonzini, Alex Bennée, aurelien

From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-11-kbastian@mail.uni-paderborn.de>
---
 tests/tcg/tricore/Makefile.softmmu-target |  1 +
 tests/tcg/tricore/test_fadd.S             | 16 ++++++++++++++++
 2 files changed, 17 insertions(+)
 create mode 100644 tests/tcg/tricore/test_fadd.S

diff --git a/tests/tcg/tricore/Makefile.softmmu-target b/tests/tcg/tricore/Makefile.softmmu-target
index 799b51191e..e7adb16af9 100644
--- a/tests/tcg/tricore/Makefile.softmmu-target
+++ b/tests/tcg/tricore/Makefile.softmmu-target
@@ -7,6 +7,7 @@ TESTS += test_abs.tst
 TESTS += test_bmerge.tst
 TESTS += test_clz.tst
 TESTS += test_dvstep.tst
+TESTS += test_fadd.tst
 
 QEMU_OPTS += -M tricore_testboard -nographic -kernel
 
diff --git a/tests/tcg/tricore/test_fadd.S b/tests/tcg/tricore/test_fadd.S
new file mode 100644
index 0000000000..1a65054803
--- /dev/null
+++ b/tests/tcg/tricore/test_fadd.S
@@ -0,0 +1,16 @@
+#include "macros.h"
+.text
+.global _start
+_start:
+    TEST_D_DD_PSW(add.f, 1, 0x7fc00000, 0x00000b80, 0xffffff85, 0x00001234)
+    TEST_D_DD_PSW(add.f, 2, 0xf9c00000, 0x00000b80, 0xf9400000, 0xf9400000)
+    TEST_D_DD_PSW(add.f, 3, 0x8bb858ca, 0x00000b80, 0x8b3858ca, 0x8b3858ca)
+    TEST_D_DD_PSW(add.f, 4, 0x00000000, 0x00000b80, 0x000000ff, 0x00000000)
+    TEST_D_DD_PSW(add.f, 5, 0x7fc00000, 0x00000b80, 0xfffffe52, 0x0a4cf70c)
+    TEST_D_DD_PSW(add.f, 6, 0x9e6d5076, 0x84000b80, 0x9ded50ec, 0x9ded4fff)
+    TEST_D_DD_PSW(add.f, 7, 0x00000000, 0x04000b80, 0x0000e8bd, 0x00000000)
+    TEST_D_DD_PSW(add.f, 8, 0x7fc00000, 0xc4000b80, 0xffad546e, 0xffad546e)
+    TEST_D_DD_PSW(add.f, 9, 0x7fc00000, 0x04000b80, 0xfffe0000, 0x08130000)
+
+    TEST_PASSFAIL
+
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 21/30] tests/tcg/tricore: Add fmul test
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (19 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 20/30] tests/tcg/tricore: Add fadd test Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 22/30] tests/tcg/tricore: Add ftoi test Alex Bennée
                   ` (9 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, Bastian Koppelmann, f4bug, stefanha, crosa,
	pbonzini, Alex Bennée, aurelien

From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-12-kbastian@mail.uni-paderborn.de>
---
 tests/tcg/tricore/Makefile.softmmu-target | 1 +
 tests/tcg/tricore/test_fmul.S             | 8 ++++++++
 2 files changed, 9 insertions(+)
 create mode 100644 tests/tcg/tricore/test_fmul.S

diff --git a/tests/tcg/tricore/Makefile.softmmu-target b/tests/tcg/tricore/Makefile.softmmu-target
index e7adb16af9..34da1f37de 100644
--- a/tests/tcg/tricore/Makefile.softmmu-target
+++ b/tests/tcg/tricore/Makefile.softmmu-target
@@ -8,6 +8,7 @@ TESTS += test_bmerge.tst
 TESTS += test_clz.tst
 TESTS += test_dvstep.tst
 TESTS += test_fadd.tst
+TESTS += test_fmul.tst
 
 QEMU_OPTS += -M tricore_testboard -nographic -kernel
 
diff --git a/tests/tcg/tricore/test_fmul.S b/tests/tcg/tricore/test_fmul.S
new file mode 100644
index 0000000000..fb1f634b2d
--- /dev/null
+++ b/tests/tcg/tricore/test_fmul.S
@@ -0,0 +1,8 @@
+#include "macros.h"
+.text
+.global _start
+_start:
+    TEST_D_DD_PSW(mul.f, 1, 0x974f4f0a, 0x84000b80, 0x1a0b1980, 0xbcbec42d)
+
+    TEST_PASSFAIL
+
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 22/30] tests/tcg/tricore: Add ftoi test
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (20 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 21/30] tests/tcg/tricore: Add fmul test Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 23/30] tests/tcg/tricore: Add madd test Alex Bennée
                   ` (8 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, Bastian Koppelmann, f4bug, stefanha, crosa,
	pbonzini, Alex Bennée, aurelien

From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-13-kbastian@mail.uni-paderborn.de>
---
 tests/tcg/tricore/macros.h                |  7 +++++++
 tests/tcg/tricore/Makefile.softmmu-target |  1 +
 tests/tcg/tricore/test_ftoi.S             | 10 ++++++++++
 3 files changed, 18 insertions(+)
 create mode 100644 tests/tcg/tricore/test_ftoi.S

diff --git a/tests/tcg/tricore/macros.h b/tests/tcg/tricore/macros.h
index 59b4b9a352..e6a41cd1a2 100644
--- a/tests/tcg/tricore/macros.h
+++ b/tests/tcg/tricore/macros.h
@@ -70,6 +70,13 @@ test_ ## num:                                                      \
     insn DREG_CALC_RESULT, DREG_RS1;          \
     )
 
+#define TEST_D_D_PSW(insn, num, result, psw, rs1)     \
+    TEST_CASE_PSW(num, DREG_CALC_RESULT, result, psw, \
+    LI(DREG_RS1, rs1);                                \
+    rstv;                                             \
+    insn DREG_CORRECT_RESULT, DREG_RS1;               \
+    )
+
 #define TEST_D_DD_PSW(insn, num, result, psw, rs1, rs2) \
     TEST_CASE_PSW(num, DREG_CALC_RESULT, result, psw,   \
     LI(DREG_RS1, rs1);                                  \
diff --git a/tests/tcg/tricore/Makefile.softmmu-target b/tests/tcg/tricore/Makefile.softmmu-target
index 34da1f37de..fcc7b6c1c9 100644
--- a/tests/tcg/tricore/Makefile.softmmu-target
+++ b/tests/tcg/tricore/Makefile.softmmu-target
@@ -9,6 +9,7 @@ TESTS += test_clz.tst
 TESTS += test_dvstep.tst
 TESTS += test_fadd.tst
 TESTS += test_fmul.tst
+TESTS += test_ftoi.tst
 
 QEMU_OPTS += -M tricore_testboard -nographic -kernel
 
diff --git a/tests/tcg/tricore/test_ftoi.S b/tests/tcg/tricore/test_ftoi.S
new file mode 100644
index 0000000000..fb4af6b5aa
--- /dev/null
+++ b/tests/tcg/tricore/test_ftoi.S
@@ -0,0 +1,10 @@
+#include "macros.h"
+.text
+.global _start
+_start:
+    TEST_D_D_PSW(ftoi, 1, 0x0, 0x84000b80, 0x05f6e605)
+    TEST_D_D_PSW(ftoi, 2, 0x0, 0x04000b80, 0x00012200)
+    TEST_D_D_PSW(ftoi, 3, 0x0, 0xc4000b80, 0xffffffff)
+
+    TEST_PASSFAIL
+
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 23/30] tests/tcg/tricore: Add madd test
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (21 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 22/30] tests/tcg/tricore: Add ftoi test Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 24/30] tests/tcg/tricore: Add msub test Alex Bennée
                   ` (7 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, Bastian Koppelmann, f4bug, stefanha, crosa,
	pbonzini, Alex Bennée, aurelien

From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-14-kbastian@mail.uni-paderborn.de>
---
 tests/tcg/tricore/macros.h                | 18 ++++++++++++++++++
 tests/tcg/tricore/Makefile.softmmu-target |  1 +
 tests/tcg/tricore/test_madd.S             | 11 +++++++++++
 3 files changed, 30 insertions(+)
 create mode 100644 tests/tcg/tricore/test_madd.S

diff --git a/tests/tcg/tricore/macros.h b/tests/tcg/tricore/macros.h
index e6a41cd1a2..0d76fc403a 100644
--- a/tests/tcg/tricore/macros.h
+++ b/tests/tcg/tricore/macros.h
@@ -9,6 +9,7 @@
 /* Register definitions */
 #define DREG_RS1 %d0
 #define DREG_RS2 %d1
+#define DREG_RS3 %d4
 #define DREG_CALC_RESULT %d1
 #define DREG_CALC_PSW %d2
 #define DREG_CORRECT_PSW %d3
@@ -85,6 +86,23 @@ test_ ## num:                                                      \
     insn DREG_CALC_RESULT, DREG_RS1, DREG_RS2;          \
     )
 
+#define TEST_D_DDD_PSW(insn, num, result, psw, rs1, rs2, rs3) \
+    TEST_CASE_PSW(num, DREG_CALC_RESULT, result, psw,         \
+    LI(DREG_RS1, rs1);                                        \
+    LI(DREG_RS2, rs2);                                        \
+    LI(DREG_RS3, rs3);                                        \
+    rstv;                                                     \
+    insn DREG_CALC_RESULT, DREG_RS1, DREG_RS2, DREG_RS3;      \
+    )
+
+#define TEST_D_DDI_PSW(insn, num, result, psw, rs1, rs2, imm) \
+    TEST_CASE_PSW(num, DREG_CALC_RESULT, result, psw,         \
+    LI(DREG_RS1, rs1);                                        \
+    LI(DREG_RS2, rs2);                                        \
+    rstv;                                                     \
+    insn DREG_CALC_RESULT, DREG_RS1, DREG_RS2, imm;           \
+    )
+
 #define TEST_E_ED(insn, num, res_hi, res_lo, rs1_hi, rs1_lo, rs2) \
     TEST_CASE_E(num, res_lo, res_hi,                              \
     LI(EREG_RS1_LO, rs1_lo);                                      \
diff --git a/tests/tcg/tricore/Makefile.softmmu-target b/tests/tcg/tricore/Makefile.softmmu-target
index fcc7b6c1c9..8de005523e 100644
--- a/tests/tcg/tricore/Makefile.softmmu-target
+++ b/tests/tcg/tricore/Makefile.softmmu-target
@@ -10,6 +10,7 @@ TESTS += test_dvstep.tst
 TESTS += test_fadd.tst
 TESTS += test_fmul.tst
 TESTS += test_ftoi.tst
+TESTS += test_madd.tst
 
 QEMU_OPTS += -M tricore_testboard -nographic -kernel
 
diff --git a/tests/tcg/tricore/test_madd.S b/tests/tcg/tricore/test_madd.S
new file mode 100644
index 0000000000..5d839772bb
--- /dev/null
+++ b/tests/tcg/tricore/test_madd.S
@@ -0,0 +1,11 @@
+#include "macros.h"
+.text
+.global _start
+_start:
+    TEST_D_DDI_PSW(madd,    1, 0x0000fffd, 0x60000b80, 0x0000ffff, 0x7fffffff,2)
+    TEST_D_DDI_PSW(madd,    2, 0xffff7fff, 0x60000b80, 0xffff8001, 0x7fffffff,2)
+    TEST_D_DDD_PSW(madds.u, 3, 0xffffffff, 0x60000b80, 0x00000000, 0x80000000, \
+                             0x80000000)
+
+    TEST_PASSFAIL
+
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 24/30] tests/tcg/tricore: Add msub test
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (22 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 23/30] tests/tcg/tricore: Add madd test Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 25/30] tests/tcg/tricore: Add muls test Alex Bennée
                   ` (6 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, Bastian Koppelmann, f4bug, stefanha, crosa,
	pbonzini, Alex Bennée, aurelien

From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-15-kbastian@mail.uni-paderborn.de>
---
 tests/tcg/tricore/Makefile.softmmu-target | 1 +
 tests/tcg/tricore/test_msub.S             | 9 +++++++++
 2 files changed, 10 insertions(+)
 create mode 100644 tests/tcg/tricore/test_msub.S

diff --git a/tests/tcg/tricore/Makefile.softmmu-target b/tests/tcg/tricore/Makefile.softmmu-target
index 8de005523e..0fe6a86482 100644
--- a/tests/tcg/tricore/Makefile.softmmu-target
+++ b/tests/tcg/tricore/Makefile.softmmu-target
@@ -11,6 +11,7 @@ TESTS += test_fadd.tst
 TESTS += test_fmul.tst
 TESTS += test_ftoi.tst
 TESTS += test_madd.tst
+TESTS += test_msub.tst
 
 QEMU_OPTS += -M tricore_testboard -nographic -kernel
 
diff --git a/tests/tcg/tricore/test_msub.S b/tests/tcg/tricore/test_msub.S
new file mode 100644
index 0000000000..6dee87d99c
--- /dev/null
+++ b/tests/tcg/tricore/test_msub.S
@@ -0,0 +1,9 @@
+#include "macros.h"
+.text
+.global _start
+_start:
+    TEST_D_DDI_PSW(msub, 1, 0xd2fbe5e0, 0x00000b80,0x64003300, 0xff5420d4, -216)
+    TEST_D_DDI_PSW(msub, 2, 0xfffffc10, 0x00000b80,0xfffffe68, 0xfffffffd, -200)
+    TEST_D_DDD_PSW(msubs.u, 3, 0x0, 0x60000b80, 0x1, 0xffffffff, 0xffffffdb)
+    TEST_PASSFAIL
+
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 25/30] tests/tcg/tricore: Add muls test
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (23 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 24/30] tests/tcg/tricore: Add msub test Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 26/30] tests/docker: gcc-10 based images for ppc64{, le} tests Alex Bennée
                   ` (5 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, Bastian Koppelmann, f4bug, stefanha, crosa,
	pbonzini, Alex Bennée, aurelien

From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-16-kbastian@mail.uni-paderborn.de>
---
 tests/tcg/tricore/Makefile.softmmu-target | 1 +
 tests/tcg/tricore/test_muls.S             | 9 +++++++++
 2 files changed, 10 insertions(+)
 create mode 100644 tests/tcg/tricore/test_muls.S

diff --git a/tests/tcg/tricore/Makefile.softmmu-target b/tests/tcg/tricore/Makefile.softmmu-target
index 0fe6a86482..5007c60ce8 100644
--- a/tests/tcg/tricore/Makefile.softmmu-target
+++ b/tests/tcg/tricore/Makefile.softmmu-target
@@ -12,6 +12,7 @@ TESTS += test_fmul.tst
 TESTS += test_ftoi.tst
 TESTS += test_madd.tst
 TESTS += test_msub.tst
+TESTS += test_muls.tst
 
 QEMU_OPTS += -M tricore_testboard -nographic -kernel
 
diff --git a/tests/tcg/tricore/test_muls.S b/tests/tcg/tricore/test_muls.S
new file mode 100644
index 0000000000..ca517556bc
--- /dev/null
+++ b/tests/tcg/tricore/test_muls.S
@@ -0,0 +1,9 @@
+#include "macros.h"
+.text
+.global _start
+_start:
+    TEST_D_DD_PSW(muls.u, 1, 0xffffffff, 0x78000b80, 0x80000001, 0xffffffff)
+    TEST_D_DD_PSW(muls.u, 2, 0xffffffff, 0x60000b80, 0xfffffffe, 0xffffffff)
+
+    TEST_PASSFAIL
+
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 26/30] tests/docker: gcc-10 based images for ppc64{, le} tests
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (24 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 25/30] tests/tcg/tricore: Add muls test Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 27/30] tests/tcg/ppc64le: tests for brh/brw/brd Alex Bennée
                   ` (4 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, Thomas Huth, berrange, Alex Bennée, f4bug,
	Wainer dos Santos Moschetta, Willian Rampazzo, stefanha, crosa,
	pbonzini, Matheus Ferst, aurelien

From: Matheus Ferst <matheus.ferst@eldorado.org.br>

A newer compiler is needed to build tests for Power10 instructions. As
done for arm64 on c729a99d2701, a new '-test-cross' image is created for
ppc64 and ppc64le. As done on 936fda4d771f, a test for compiler support
is added to verify that the toolchain in use has '-mpower10'. Finally,
Unused images (docker-power-cross and docker-ppc64-cross) are removed.

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210423205757.1752480-2-matheus.ferst@eldorado.org.br>
---
 .gitlab-ci.d/containers.yml                   | 13 +++---------
 tests/docker/Makefile.include                 |  5 ++---
 .../dockerfiles/debian-powerpc-cross.docker   | 12 -----------
 .../debian-powerpc-test-cross.docker          | 17 ++++++++++++++++
 .../dockerfiles/debian-ppc64-cross.docker     | 11 ----------
 tests/tcg/configure.sh                        | 20 +++++++++----------
 6 files changed, 32 insertions(+), 46 deletions(-)
 delete mode 100644 tests/docker/dockerfiles/debian-powerpc-cross.docker
 create mode 100644 tests/docker/dockerfiles/debian-powerpc-test-cross.docker
 delete mode 100644 tests/docker/dockerfiles/debian-ppc64-cross.docker

diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
index 33e4046e23..325191627d 100644
--- a/.gitlab-ci.d/containers.yml
+++ b/.gitlab-ci.d/containers.yml
@@ -144,19 +144,12 @@ mipsel-debian-cross-container:
   variables:
     NAME: debian-mipsel-cross
 
-powerpc-debian-cross-container:
+powerpc-test-debian-cross-container:
   <<: *container_job_definition
   stage: containers-layer2
-  needs: ['amd64-debian10-container']
-  variables:
-    NAME: debian-powerpc-cross
-
-ppc64-debian-cross-container:
-  <<: *container_job_definition
-  stage: containers-layer2
-  needs: ['amd64-debian10-container']
+  needs: ['amd64-debian11-container']
   variables:
-    NAME: debian-ppc64-cross
+    NAME: debian-powerpc-test-cross
 
 ppc64el-debian-cross-container:
   <<: *container_job_definition
diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
index 8967ecf118..ff5d732889 100644
--- a/tests/docker/Makefile.include
+++ b/tests/docker/Makefile.include
@@ -140,8 +140,6 @@ docker-image-debian-mips-cross: docker-image-debian10
 docker-image-debian-mips64-cross: docker-image-debian10
 docker-image-debian-mips64el-cross: docker-image-debian10
 docker-image-debian-mipsel-cross: docker-image-debian10
-docker-image-debian-powerpc-cross: docker-image-debian10
-docker-image-debian-ppc64-cross: docker-image-debian10
 docker-image-debian-ppc64el-cross: docker-image-debian10
 docker-image-debian-riscv64-cross: docker-image-debian10
 docker-image-debian-s390x-cross: docker-image-debian10
@@ -174,13 +172,14 @@ docker-image-debian-hexagon-cross: $(DOCKER_FILES_DIR)/debian-hexagon-cross.dock
 docker-image-debian-tricore-cross: docker-image-debian10
 docker-image-debian-all-test-cross: docker-image-debian10
 docker-image-debian-arm64-test-cross: docker-image-debian11
+docker-image-debian-powerpc-test-cross: docker-image-debian11
 
 # These images may be good enough for building tests but not for test builds
 DOCKER_PARTIAL_IMAGES += debian-alpha-cross
 DOCKER_PARTIAL_IMAGES += debian-arm64-test-cross
+DOCKER_PARTIAL_IMAGES += debian-powerpc-test-cross
 DOCKER_PARTIAL_IMAGES += debian-hppa-cross
 DOCKER_PARTIAL_IMAGES += debian-m68k-cross debian-mips64-cross
-DOCKER_PARTIAL_IMAGES += debian-powerpc-cross debian-ppc64-cross
 DOCKER_PARTIAL_IMAGES += debian-riscv64-cross
 DOCKER_PARTIAL_IMAGES += debian-sh4-cross debian-sparc64-cross
 DOCKER_PARTIAL_IMAGES += debian-tricore-cross
diff --git a/tests/docker/dockerfiles/debian-powerpc-cross.docker b/tests/docker/dockerfiles/debian-powerpc-cross.docker
deleted file mode 100644
index 07e1789650..0000000000
--- a/tests/docker/dockerfiles/debian-powerpc-cross.docker
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Docker powerpc cross-compiler target
-#
-# This docker target builds on the debian Buster base image.
-#
-FROM qemu/debian10
-
-RUN apt update && \
-    DEBIAN_FRONTEND=noninteractive eatmydata \
-    apt install -y --no-install-recommends \
-        gcc-powerpc-linux-gnu \
-        libc6-dev-powerpc-cross
diff --git a/tests/docker/dockerfiles/debian-powerpc-test-cross.docker b/tests/docker/dockerfiles/debian-powerpc-test-cross.docker
new file mode 100644
index 0000000000..36b336f709
--- /dev/null
+++ b/tests/docker/dockerfiles/debian-powerpc-test-cross.docker
@@ -0,0 +1,17 @@
+#
+# Docker powerpc/ppc64/ppc64le cross-compiler target
+#
+# This docker target builds on the debian Bullseye base image.
+#
+FROM qemu/debian11
+
+RUN apt update && \
+    DEBIAN_FRONTEND=noninteractive eatmydata \
+    apt install -y --no-install-recommends \
+        gcc-powerpc-linux-gnu \
+        libc6-dev-powerpc-cross \
+        gcc-10-powerpc64-linux-gnu \
+        libc6-dev-ppc64-cross \
+        gcc-10-powerpc64le-linux-gnu \
+        libc6-dev-ppc64el-cross
+
diff --git a/tests/docker/dockerfiles/debian-ppc64-cross.docker b/tests/docker/dockerfiles/debian-ppc64-cross.docker
deleted file mode 100644
index 8efe68874e..0000000000
--- a/tests/docker/dockerfiles/debian-ppc64-cross.docker
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Docker ppc64 cross-compiler target
-#
-# This docker target builds on the debian Buster base image.
-FROM qemu/debian10
-
-RUN apt update && \
-    DEBIAN_FRONTEND=noninteractive eatmydata \
-    apt install -y --no-install-recommends \
-       gcc-powerpc64-linux-gnu \
-       libc6-dev-ppc64-cross
diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh
index 11009fe433..6627318adf 100755
--- a/tests/tcg/configure.sh
+++ b/tests/tcg/configure.sh
@@ -147,18 +147,14 @@ for target in $target_list; do
       ;;
     ppc-*|ppc64abi32-*)
       container_hosts=x86_64
-      container_image=debian-powerpc-cross
-      container_cross_cc=powerpc-linux-gnu-gcc
+      container_image=debian-powerpc-test-cross
+      container_cross_cc=powerpc-linux-gnu-gcc-10
       ;;
-    ppc64-*)
+    ppc64-*|ppc64le-*)
       container_hosts=x86_64
-      container_image=debian-ppc64-cross
-      container_cross_cc=powerpc64-linux-gnu-gcc
-      ;;
-    ppc64le-*)
-      container_hosts=x86_64
-      container_image=debian-ppc64el-cross
-      container_cross_cc=powerpc64le-linux-gnu-gcc
+      container_image=debian-powerpc-test-cross
+      container_cross_cc=${target%%-*}-linux-gnu-gcc-10
+      container_cross_cc=powerpc${container_cross_cc#ppc}
       ;;
     riscv64-*)
       container_hosts=x86_64
@@ -272,6 +268,10 @@ for target in $target_list; do
                              -mpower8-vector -o $TMPE $TMPC; then
                   echo "CROSS_CC_HAS_POWER8_VECTOR=y" >> $config_target_mak
               fi
+              if do_compiler "$target_compiler" $target_compiler_cflags \
+                             -mpower10 -o $TMPE $TMPC; then
+                  echo "CROSS_CC_HAS_POWER10=y" >> $config_target_mak
+              fi
               ;;
           i386-linux-user)
               if do_compiler "$target_compiler" $target_compiler_cflags \
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 27/30] tests/tcg/ppc64le: tests for brh/brw/brd
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (25 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 26/30] tests/docker: gcc-10 based images for ppc64{, le} tests Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 28/30] tests/tcg: add a multiarch signals test to stress test signal delivery Alex Bennée
                   ` (3 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, Fabiano Rosas, Alex Bennée, f4bug, stefanha,
	crosa, pbonzini, Matheus Ferst, aurelien

From: Matheus Ferst <matheus.ferst@eldorado.org.br>

Tests for Byte-Reverse Halfword, Word and Doubleword

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Tested-by: Fabiano Rosas <farosas@linux.ibm.com>
[AJB: tweak to make rules for skip/plugins]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210423205757.1752480-3-matheus.ferst@eldorado.org.br>
---
 tests/tcg/ppc64le/byte_reverse.c  | 21 +++++++++++++++++++++
 tests/tcg/ppc64/Makefile.target   | 13 +++++++++++++
 tests/tcg/ppc64le/Makefile.target | 13 +++++++++++++
 3 files changed, 47 insertions(+)
 create mode 100644 tests/tcg/ppc64le/byte_reverse.c

diff --git a/tests/tcg/ppc64le/byte_reverse.c b/tests/tcg/ppc64le/byte_reverse.c
new file mode 100644
index 0000000000..53b76fc2e2
--- /dev/null
+++ b/tests/tcg/ppc64le/byte_reverse.c
@@ -0,0 +1,21 @@
+#include <assert.h>
+
+int main(void)
+{
+    unsigned long var;
+
+    var = 0xFEDCBA9876543210;
+    asm("brh %0, %0" : "+r"(var));
+    assert(var == 0xDCFE98BA54761032);
+
+    var = 0xFEDCBA9876543210;
+    asm("brw %0, %0" : "+r"(var));
+    assert(var == 0x98BADCFE10325476);
+
+    var = 0xFEDCBA9876543210;
+    asm("brd %0, %0" : "+r"(var));
+    assert(var == 0x1032547698BADCFE);
+
+    return 0;
+}
+
diff --git a/tests/tcg/ppc64/Makefile.target b/tests/tcg/ppc64/Makefile.target
index 0c6a4585fc..a6a4ddaeca 100644
--- a/tests/tcg/ppc64/Makefile.target
+++ b/tests/tcg/ppc64/Makefile.target
@@ -10,4 +10,17 @@ PPC64_TESTS=bcdsub
 endif
 bcdsub: CFLAGS += -mpower8-vector
 
+PPC64_TESTS += byte_reverse
+ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_POWER10),)
+run-byte_reverse: QEMU_OPTS+=-cpu POWER10
+run-plugin-byte_reverse-with-%: QEMU_OPTS+=-cpu POWER10
+else
+byte_reverse:
+	$(call skip-test, "BUILD of $@", "missing compiler support")
+run-byte_reverse:
+	$(call skip-test, "RUN of byte_reverse", "not built")
+run-plugin-byte_reverse-with-%:
+	$(call skip-test, "RUN of byte_reverse ($*)", "not built")
+endif
+
 TESTS += $(PPC64_TESTS)
diff --git a/tests/tcg/ppc64le/Makefile.target b/tests/tcg/ppc64le/Makefile.target
index 1acfcff94a..c0c14ffbad 100644
--- a/tests/tcg/ppc64le/Makefile.target
+++ b/tests/tcg/ppc64le/Makefile.target
@@ -9,4 +9,17 @@ PPC64LE_TESTS=bcdsub
 endif
 bcdsub: CFLAGS += -mpower8-vector
 
+PPC64LE_TESTS += byte_reverse
+ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_POWER10),)
+run-byte_reverse: QEMU_OPTS+=-cpu POWER10
+run-plugin-byte_reverse-with-%: QEMU_OPTS+=-cpu POWER10
+else
+byte_reverse:
+	$(call skip-test, "BUILD of $@", "missing compiler support")
+run-byte_reverse:
+	$(call skip-test, "RUN of byte_reverse", "not built")
+run-plugin-byte_reverse-with-%:
+	$(call skip-test, "RUN of byte_reverse ($*)", "not built")
+endif
+
 TESTS += $(PPC64LE_TESTS)
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH v2 28/30] tests/tcg: add a multiarch signals test to stress test signal delivery
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (26 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 27/30] tests/tcg/ppc64le: tests for brh/brw/brd Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-04 10:02 ` [PATCH v2 29/30] cirrus.yml: Fix the MSYS2 task Alex Bennée
                   ` (2 subsequent siblings)
  30 siblings, 0 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, Richard Henderson, f4bug, stefanha, crosa,
	pbonzini, Alex Bennée, aurelien

This adds a simple signal test that combines the POSIX timer_create
with signal delivery across multiple threads. The aim is to provide a
bit more of a stress test to flush out signal handling issues for
easily than the occasional random crash we sometimes see in linux-test
or threadcount.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

---
v2
  - minor cosmetic tweaks
  - skip for alpha/sparc64 (including with plugins)
---
 tests/tcg/multiarch/signals.c       | 149 ++++++++++++++++++++++++++++
 tests/tcg/alpha/Makefile.target     |   7 ++
 tests/tcg/multiarch/Makefile.target |   2 +
 tests/tcg/sparc64/Makefile.target   |   7 ++
 4 files changed, 165 insertions(+)
 create mode 100644 tests/tcg/multiarch/signals.c

diff --git a/tests/tcg/multiarch/signals.c b/tests/tcg/multiarch/signals.c
new file mode 100644
index 0000000000..998c8fdefd
--- /dev/null
+++ b/tests/tcg/multiarch/signals.c
@@ -0,0 +1,149 @@
+/*
+ * linux-user signal handling tests.
+ *
+ * Copyright (c) 2021 Linaro Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include <stdarg.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <pthread.h>
+#include <string.h>
+#include <signal.h>
+#include <time.h>
+#include <sys/time.h>
+
+static void error1(const char *filename, int line, const char *fmt, ...)
+{
+    va_list ap;
+    va_start(ap, fmt);
+    fprintf(stderr, "%s:%d: ", filename, line);
+    vfprintf(stderr, fmt, ap);
+    fprintf(stderr, "\n");
+    va_end(ap);
+    exit(1);
+}
+
+static int __chk_error(const char *filename, int line, int ret)
+{
+    if (ret < 0) {
+        error1(filename, line, "%m (ret=%d, errno=%d/%s)",
+               ret, errno, strerror(errno));
+    }
+    return ret;
+}
+
+#define error(fmt, ...) error1(__FILE__, __LINE__, fmt, ## __VA_ARGS__)
+
+#define chk_error(ret) __chk_error(__FILE__, __LINE__, (ret))
+
+/*
+ * Thread handling
+ */
+typedef struct ThreadJob ThreadJob;
+
+struct ThreadJob {
+    int number;
+    int sleep;
+    int count;
+};
+
+static pthread_t *threads;
+static int max_threads = 10;
+__thread int signal_count;
+int total_signal_count;
+
+static void *background_thread_func(void *arg)
+{
+    ThreadJob *job = (ThreadJob *) arg;
+
+    printf("thread%d: started\n", job->number);
+    while (total_signal_count < job->count) {
+        usleep(job->sleep);
+    }
+    printf("thread%d: saw %d alarms from %d\n", job->number,
+           signal_count, total_signal_count);
+    return NULL;
+}
+
+static void spawn_threads(void)
+{
+    int i;
+    threads = calloc(sizeof(pthread_t), max_threads);
+
+    for (i = 0; i < max_threads; i++) {
+        ThreadJob *job = calloc(sizeof(ThreadJob), 1);
+        job->number = i;
+        job->sleep = i * 1000;
+        job->count = i * 100;
+        pthread_create(threads + i, NULL, background_thread_func, job);
+    }
+}
+
+static void close_threads(void)
+{
+    int i;
+    for (i = 0; i < max_threads; i++) {
+        pthread_join(threads[i], NULL);
+    }
+    free(threads);
+    threads = NULL;
+}
+
+static void sig_alarm(int sig, siginfo_t *info, void *puc)
+{
+    if (sig != SIGRTMIN) {
+        error("unexpected signal");
+    }
+    signal_count++;
+    __atomic_fetch_add(&total_signal_count, 1, __ATOMIC_SEQ_CST);
+}
+
+static void test_signals(void)
+{
+    struct sigaction act;
+    struct itimerspec it;
+    timer_t tid;
+    struct sigevent sev;
+
+    /* Set up SIG handler */
+    act.sa_sigaction = sig_alarm;
+    sigemptyset(&act.sa_mask);
+    act.sa_flags = SA_SIGINFO;
+    chk_error(sigaction(SIGRTMIN, &act, NULL));
+
+    /* Create POSIX timer */
+    sev.sigev_notify = SIGEV_SIGNAL;
+    sev.sigev_signo = SIGRTMIN;
+    sev.sigev_value.sival_ptr = &tid;
+    chk_error(timer_create(CLOCK_REALTIME, &sev, &tid));
+
+    it.it_interval.tv_sec = 0;
+    it.it_interval.tv_nsec = 1000000;
+    it.it_value.tv_sec = 0;
+    it.it_value.tv_nsec = 1000000;
+    chk_error(timer_settime(tid, 0, &it, NULL));
+
+    spawn_threads();
+
+    do {
+        usleep(1000);
+    } while (total_signal_count < 2000);
+
+    printf("shutting down after: %d signals\n", total_signal_count);
+
+    close_threads();
+
+    chk_error(timer_delete(tid));
+}
+
+int main(int argc, char **argv)
+{
+    test_signals();
+    return 0;
+}
diff --git a/tests/tcg/alpha/Makefile.target b/tests/tcg/alpha/Makefile.target
index a585080328..49ce5cd69f 100644
--- a/tests/tcg/alpha/Makefile.target
+++ b/tests/tcg/alpha/Makefile.target
@@ -14,5 +14,12 @@ test-cmov: test-cond.c
 
 run-test-cmov: test-cmov
 
+# currently broken: executes a halt on sigreturn leading to being terminated by signal SIGILL (Illegal instruction)
+run-signals: signals
+	$(call skip-test, $<, "BROKEN")
+
+run-plugin-signals-with-%: signals
+	$(call skip-test, $<, "BROKEN")
+
 # On Alpha Linux only supports 8k pages
 EXTRA_RUNS+=run-test-mmap-8192
diff --git a/tests/tcg/multiarch/Makefile.target b/tests/tcg/multiarch/Makefile.target
index a3a751723d..3f283eabe6 100644
--- a/tests/tcg/multiarch/Makefile.target
+++ b/tests/tcg/multiarch/Makefile.target
@@ -30,6 +30,8 @@ testthread: LDFLAGS+=-lpthread
 
 threadcount: LDFLAGS+=-lpthread
 
+signals: LDFLAGS+=-lrt -lpthread
+
 # We define the runner for test-mmap after the individual
 # architectures have defined their supported pages sizes. If no
 # additional page sizes are defined we only run the default test.
diff --git a/tests/tcg/sparc64/Makefile.target b/tests/tcg/sparc64/Makefile.target
index 5bd7f90583..fb3825b7fa 100644
--- a/tests/tcg/sparc64/Makefile.target
+++ b/tests/tcg/sparc64/Makefile.target
@@ -7,5 +7,12 @@
 run-linux-test: linux-test
 	$(call skip-test, $<, "BROKEN")
 
+# currently broken: hangs after the first thread exits
+run-signals: signals
+	$(call skip-test, $<, "BROKEN")
+
+run-plugin-signals-with-%: signals
+	$(call skip-test, $<, "BROKEN")
+
 # On Sparc64 Linux support 8k pages
 EXTRA_RUNS+=run-test-mmap-8192
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 29/30] cirrus.yml: Fix the MSYS2 task
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (27 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 28/30] tests/tcg: add a multiarch signals test to stress test signal delivery Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-12  4:49   ` Philippe Mathieu-Daudé
  2021-05-12  4:56   ` 罗勇刚(Yonggang Luo)
  2021-05-04 10:02 ` [PATCH v2 30/30] configure: use cc, not host_cc to set cross_cc for build arch Alex Bennée
  2021-05-04 10:39 ` [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) no-reply
  30 siblings, 2 replies; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, Thomas Huth, berrange, f4bug, Ed Maste, Yonggang Luo,
	stefanha, crosa, pbonzini, Alex Bennée, Li-Wen Hsu,
	aurelien

From: Thomas Huth <thuth@redhat.com>

The MSYS2 task in the Cirrus-CI is currently failing with error messages
like this:

 warning: database file for 'ucrt64' does not exist (use '-Sy' to download)
 :: Starting core system upgrade...
  there is nothing to do
 :: Starting full system upgrade...
 error: failed to prepare transaction (could not find database)

Seems like it can be fixed by switching to a newer release and by refreshing
the database one more time after changing the /etc/pacman.conf file.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210427185524.281883-1-thuth@redhat.com>
---
 .cirrus.yml | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/.cirrus.yml b/.cirrus.yml
index f53c519447..f4bf49b704 100644
--- a/.cirrus.yml
+++ b/.cirrus.yml
@@ -67,7 +67,7 @@ windows_msys2_task:
     CIRRUS_SHELL: powershell
     MSYS: winsymlinks:nativestrict
     MSYSTEM: MINGW64
-    MSYS2_URL: https://github.com/msys2/msys2-installer/releases/download/2021-01-05/msys2-base-x86_64-20210105.sfx.exe
+    MSYS2_URL: https://github.com/msys2/msys2-installer/releases/download/2021-04-19/msys2-base-x86_64-20210419.sfx.exe
     MSYS2_FINGERPRINT: 0
     MSYS2_PACKAGES: "
       diffutils git grep make pkg-config sed
@@ -130,7 +130,7 @@ windows_msys2_task:
         taskkill /F /FI "MODULES eq msys-2.0.dll"
         tasklist
         C:\tools\msys64\usr\bin\bash.exe -lc "mv -f /etc/pacman.conf.pacnew /etc/pacman.conf || true"
-        C:\tools\msys64\usr\bin\bash.exe -lc "pacman --noconfirm -Suu --overwrite=*"
+        C:\tools\msys64\usr\bin\bash.exe -lc "pacman --noconfirm -Syuu --overwrite=*"
         Write-Output "Core install time taken: $((Get-Date).Subtract($start_time))"
         $start_time = Get-Date
 
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* [PATCH  v2 30/30] configure: use cc, not host_cc to set cross_cc for build arch
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (28 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 29/30] cirrus.yml: Fix the MSYS2 task Alex Bennée
@ 2021-05-04 10:02 ` Alex Bennée
  2021-05-12  4:50   ` Philippe Mathieu-Daudé
  2021-05-04 10:39 ` [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) no-reply
  30 siblings, 1 reply; 37+ messages in thread
From: Alex Bennée @ 2021-05-04 10:02 UTC (permalink / raw)
  To: qemu-devel
  Cc: fam, berrange, f4bug, stefanha, crosa, pbonzini,
	Alex Bennée, aurelien

Otherwise you run into hilarity like trying when cross compiling a 32
bit ARM build on a 64 bit system trying to use host_cc to build 32 bit
test cases.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
 configure | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configure b/configure
index bb86c72479..aef53cd8bb 100755
--- a/configure
+++ b/configure
@@ -1648,7 +1648,7 @@ case "$cpu" in
     # No special flags required for other host CPUs
 esac
 
-eval "cross_cc_${cpu}=\$host_cc"
+eval "cross_cc_${cpu}=\$cc"
 cross_cc_vars="$cross_cc_vars cross_cc_${cpu}"
 QEMU_CFLAGS="$CPU_CFLAGS $QEMU_CFLAGS"
 
-- 
2.20.1



^ permalink raw reply	[flat|nested] 37+ messages in thread

* Re: [PATCH  v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus)
  2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
                   ` (29 preceding siblings ...)
  2021-05-04 10:02 ` [PATCH v2 30/30] configure: use cc, not host_cc to set cross_cc for build arch Alex Bennée
@ 2021-05-04 10:39 ` no-reply
  30 siblings, 0 replies; 37+ messages in thread
From: no-reply @ 2021-05-04 10:39 UTC (permalink / raw)
  To: alex.bennee
  Cc: fam, berrange, qemu-devel, f4bug, stefanha, crosa, pbonzini,
	alex.bennee, aurelien

Patchew URL: https://patchew.org/QEMU/20210504100223.25427-1-alex.bennee@linaro.org/



Hi,

This series seems to have some coding style problems. See output below for
more information:

Type: series
Message-id: 20210504100223.25427-1-alex.bennee@linaro.org
Subject: [PATCH  v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus)

=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===

Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
 * [new tag]         patchew/20210504100223.25427-1-alex.bennee@linaro.org -> patchew/20210504100223.25427-1-alex.bennee@linaro.org
 - [tag update]      patchew/20210504100545.112213-1-dgilbert@redhat.com -> patchew/20210504100545.112213-1-dgilbert@redhat.com
Switched to a new branch 'test'
c91b027 configure: use cc, not host_cc to set cross_cc for build arch
68da1a5 cirrus.yml: Fix the MSYS2 task
dbc4eac tests/tcg: add a multiarch signals test to stress test signal delivery
775ac55 tests/tcg/ppc64le: tests for brh/brw/brd
bf6793b tests/docker: gcc-10 based images for ppc64{, le} tests
279b264 tests/tcg/tricore: Add muls test
a730630 tests/tcg/tricore: Add msub test
6abe70e tests/tcg/tricore: Add madd test
03bcac9 tests/tcg/tricore: Add ftoi test
0bcb010 tests/tcg/tricore: Add fmul test
b41e172 tests/tcg/tricore: Add fadd test
15c3104 tests/tcg/tricore: Add dvstep test
060e17c tests/tcg/tricore: Add clz test
3cafa12 tests/tcg/tricore: Add bmerge test
4f6f9c2 tests/tcg/tricore: Add macros to create tests and first test 'abs'
f4d9deb configure: Emit HOST_CC to config-host.mak
38cf8f0 tests/tcg/tricore: Add build infrastructure
0edbd12 hw/tricore: Add testdevice for tests in tests/tcg/
eb3c5b5 tests/tcg: Run timeout cmds using --foreground
583bc64 tests/tcg: Add docker_as and docker_ld cmds
98212d6 tests/docker: Added libbpf library to the docker files.
12d91c4 tests/tcg: don't iterate through other arch compilers
37f804f gitlab: add build-user-hexagon test
f18332c tests/tcg: Use Hexagon Docker image
dcf3ddc docker: Add Hexagon image
40cb310 tests/docker: add "fetch" sub-command
8798129 tests/docker: allow "update" to add the current user
52459e7 tests/docker: make executable an optional argument to "update"
2379848 tests/docker: fix copying of executable in "update"
51cafd2 checkpatch: Fix use of uninitialized value

=== OUTPUT BEGIN ===
1/30 Checking commit 51cafd2e3c4d (checkpatch: Fix use of uninitialized value)
2/30 Checking commit 23798480f6b7 (tests/docker: fix copying of executable in "update")
3/30 Checking commit 52459e70e0cf (tests/docker: make executable an optional argument to "update")
4/30 Checking commit 879812962b47 (tests/docker: allow "update" to add the current user)
5/30 Checking commit 40cb310803ff (tests/docker: add "fetch" sub-command)
6/30 Checking commit dcf3ddc604fd (docker: Add Hexagon image)
WARNING: line over 80 characters
#205: FILE: tests/docker/dockerfiles/debian-hexagon-cross.docker.d/build-toolchain.sh:63:
+    -DCMAKE_ASM_FLAGS="-G0 -mlong-calls -fno-pic --target=hexagon-unknown-linux-musl " \

ERROR: line over 90 characters
#232: FILE: tests/docker/dockerfiles/debian-hexagon-cross.docker.d/build-toolchain.sh:90:
+    CROSS_CFLAGS="-G0 -O0 -mv65 -fno-builtin -fno-rounding-math --target=hexagon-unknown-linux-musl" \

ERROR: line over 90 characters
#269: FILE: tests/docker/dockerfiles/debian-hexagon-cross.docker.d/build-toolchain.sh:127:
+    CFLAGS="-G0 -O0 -mv65 -fno-builtin -fno-rounding-math --target=hexagon-unknown-linux-musl" \

total: 2 errors, 1 warnings, 221 lines checked

Patch 6/30 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

7/30 Checking commit f18332c48a35 (tests/tcg: Use Hexagon Docker image)
8/30 Checking commit 37f804f44baa (gitlab: add build-user-hexagon test)
9/30 Checking commit 12d91c450e8b (tests/tcg: don't iterate through other arch compilers)
10/30 Checking commit 98212d6201f2 (tests/docker: Added libbpf library to the docker files.)
11/30 Checking commit 583bc6479039 (tests/tcg: Add docker_as and docker_ld cmds)
12/30 Checking commit eb3c5b5266ad (tests/tcg: Run timeout cmds using --foreground)
13/30 Checking commit 0edbd12f6075 (hw/tricore: Add testdevice for tests in tests/tcg/)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#68: 
new file mode 100644

total: 0 errors, 1 warnings, 152 lines checked

Patch 13/30 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
14/30 Checking commit 38cf8f0eb3ad (tests/tcg/tricore: Add build infrastructure)
15/30 Checking commit f4d9debabfc6 (configure: Emit HOST_CC to config-host.mak)
16/30 Checking commit 4f6f9c2d6074 (tests/tcg/tricore: Add macros to create tests and first test 'abs')
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#61: 
new file mode 100644

ERROR: Macros with multiple statements should be enclosed in a do - while loop
#67: FILE: tests/tcg/tricore/macros.h:2:
+#define LI(reg, val)           \
+    mov.u reg, lo:val;         \
+    movh DREG_TEMP_LI, up:val; \
+    or reg, reg, DREG_TEMP_LI; \
+

ERROR: spaces required around that ':' (ctx:VxV)
#68: FILE: tests/tcg/tricore/macros.h:3:
+    mov.u reg, lo:val;         \
                  ^

ERROR: spaces required around that ':' (ctx:VxV)
#69: FILE: tests/tcg/tricore/macros.h:4:
+    movh DREG_TEMP_LI, up:val; \
                          ^

ERROR: spaces required around that '%' (ctx:WxV)
#75: FILE: tests/tcg/tricore/macros.h:10:
+#define DREG_RS1 %d0
                  ^

ERROR: Macros with complex values should be enclosed in parenthesis
#75: FILE: tests/tcg/tricore/macros.h:10:
+#define DREG_RS1 %d0

ERROR: spaces required around that '%' (ctx:WxV)
#76: FILE: tests/tcg/tricore/macros.h:11:
+#define DREG_CALC_RESULT %d1
                          ^

ERROR: Macros with complex values should be enclosed in parenthesis
#76: FILE: tests/tcg/tricore/macros.h:11:
+#define DREG_CALC_RESULT %d1

ERROR: spaces required around that '%' (ctx:WxV)
#77: FILE: tests/tcg/tricore/macros.h:12:
+#define DREG_TEMP_LI %d10
                      ^

ERROR: Macros with complex values should be enclosed in parenthesis
#77: FILE: tests/tcg/tricore/macros.h:12:
+#define DREG_TEMP_LI %d10

ERROR: spaces required around that '%' (ctx:WxV)
#78: FILE: tests/tcg/tricore/macros.h:13:
+#define DREG_TEMP %d11
                   ^

ERROR: Macros with complex values should be enclosed in parenthesis
#78: FILE: tests/tcg/tricore/macros.h:13:
+#define DREG_TEMP %d11

ERROR: spaces required around that '%' (ctx:WxV)
#79: FILE: tests/tcg/tricore/macros.h:14:
+#define DREG_TEST_NUM %d14
                       ^

ERROR: Macros with complex values should be enclosed in parenthesis
#79: FILE: tests/tcg/tricore/macros.h:14:
+#define DREG_TEST_NUM %d14

ERROR: spaces required around that '%' (ctx:WxV)
#80: FILE: tests/tcg/tricore/macros.h:15:
+#define DREG_CORRECT_RESULT %d15
                             ^

ERROR: Macros with complex values should be enclosed in parenthesis
#80: FILE: tests/tcg/tricore/macros.h:15:
+#define DREG_CORRECT_RESULT %d15

ERROR: spaces required around that '%' (ctx:WxV)
#82: FILE: tests/tcg/tricore/macros.h:17:
+#define DREG_DEV_ADDR %a15
                       ^

ERROR: Macros with complex values should be enclosed in parenthesis
#82: FILE: tests/tcg/tricore/macros.h:17:
+#define DREG_DEV_ADDR %a15

ERROR: Macros with multiple statements should be enclosed in a do - while loop
#85: FILE: tests/tcg/tricore/macros.h:20:
+#define TEST_CASE(num, testreg, correct, code...) \
+test_ ## num:                                     \
+    code;                                         \
+    LI(DREG_CORRECT_RESULT, correct)              \
+    mov DREG_TEST_NUM, num;                       \
+    jne testreg, DREG_CORRECT_RESULT, fail        \
+

ERROR: spaces required around that ':' (ctx:VxE)
#86: FILE: tests/tcg/tricore/macros.h:21:
+test_ ## num:                                     \
             ^

WARNING: Block comments use a leading /* on a separate line
#92: FILE: tests/tcg/tricore/macros.h:27:
+/* Actual test case type

ERROR: Macros with multiple statements should be enclosed in a do - while loop
#104: FILE: tests/tcg/tricore/macros.h:39:
+#define TEST_PASSFAIL                       \
+        j pass;                             \
+fail:                                       \
+        LI(DREG_TEMP, TESTDEV_ADDR)         \
+        mov.a DREG_DEV_ADDR, DREG_TEMP;     \
+        st.w [DREG_DEV_ADDR], DREG_TEST_NUM;\
+        debug;                              \
+        j fail;                             \
+pass:                                       \
+        LI(DREG_TEMP, TESTDEV_ADDR)         \
+        mov.a DREG_DEV_ADDR, DREG_TEMP;     \
+        mov DREG_TEST_NUM, 0;               \
+        st.w [DREG_DEV_ADDR], DREG_TEST_NUM;\
+        debug;                              \
+        j pass;

ERROR: space prohibited before open square bracket '['
#109: FILE: tests/tcg/tricore/macros.h:44:
+        st.w [DREG_DEV_ADDR], DREG_TEST_NUM;\

ERROR: space prohibited before open square bracket '['
#116: FILE: tests/tcg/tricore/macros.h:51:
+        st.w [DREG_DEV_ADDR], DREG_TEST_NUM;\

total: 22 errors, 2 warnings, 80 lines checked

Patch 16/30 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

17/30 Checking commit 3cafa12879ab (tests/tcg/tricore: Add bmerge test)
ERROR: spaces required around that '%' (ctx:WxV)
#38: FILE: tests/tcg/tricore/macros.h:11:
+#define DREG_RS2 %d1
                  ^

ERROR: Macros with complex values should be enclosed in parenthesis
#38: FILE: tests/tcg/tricore/macros.h:11:
+#define DREG_RS2 %d1

ERROR: spaces required around that '%' (ctx:WxV)
#40: FILE: tests/tcg/tricore/macros.h:13:
+#define DREG_CALC_PSW %d2
                       ^

ERROR: Macros with complex values should be enclosed in parenthesis
#40: FILE: tests/tcg/tricore/macros.h:13:
+#define DREG_CALC_PSW %d2

ERROR: spaces required around that '%' (ctx:WxV)
#41: FILE: tests/tcg/tricore/macros.h:14:
+#define DREG_CORRECT_PSW %d3
                          ^

ERROR: Macros with complex values should be enclosed in parenthesis
#41: FILE: tests/tcg/tricore/macros.h:14:
+#define DREG_CORRECT_PSW %d3

ERROR: spaces required around that ':' (ctx:VxE)
#50: FILE: tests/tcg/tricore/macros.h:31:
+test_ ## num:                                                      \
             ^

WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#81: 
new file mode 100644

total: 7 errors, 1 warnings, 58 lines checked

Patch 17/30 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

18/30 Checking commit 060e17c4615e (tests/tcg/tricore: Add clz test)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#31: 
new file mode 100644

total: 0 errors, 1 warnings, 16 lines checked

Patch 18/30 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
19/30 Checking commit 15c3104d8529 (tests/tcg/tricore: Add dvstep test)
ERROR: spaces required around that '%' (ctx:WxV)
#38: FILE: tests/tcg/tricore/macros.h:22:
+#define EREG_RS1 %e6
                  ^

ERROR: Macros with complex values should be enclosed in parenthesis
#38: FILE: tests/tcg/tricore/macros.h:22:
+#define EREG_RS1 %e6

ERROR: spaces required around that '%' (ctx:WxV)
#39: FILE: tests/tcg/tricore/macros.h:23:
+#define EREG_RS1_LO %d6
                     ^

ERROR: Macros with complex values should be enclosed in parenthesis
#39: FILE: tests/tcg/tricore/macros.h:23:
+#define EREG_RS1_LO %d6

ERROR: spaces required around that '%' (ctx:WxV)
#40: FILE: tests/tcg/tricore/macros.h:24:
+#define EREG_RS1_HI %d7
                     ^

ERROR: Macros with complex values should be enclosed in parenthesis
#40: FILE: tests/tcg/tricore/macros.h:24:
+#define EREG_RS1_HI %d7

ERROR: spaces required around that '%' (ctx:WxV)
#41: FILE: tests/tcg/tricore/macros.h:25:
+#define EREG_RS2 %e8
                  ^

ERROR: Macros with complex values should be enclosed in parenthesis
#41: FILE: tests/tcg/tricore/macros.h:25:
+#define EREG_RS2 %e8

ERROR: spaces required around that '%' (ctx:WxV)
#42: FILE: tests/tcg/tricore/macros.h:26:
+#define EREG_RS2_LO %d8
                     ^

ERROR: Macros with complex values should be enclosed in parenthesis
#42: FILE: tests/tcg/tricore/macros.h:26:
+#define EREG_RS2_LO %d8

ERROR: spaces required around that '%' (ctx:WxV)
#43: FILE: tests/tcg/tricore/macros.h:27:
+#define EREG_RS2_HI %d9
                     ^

ERROR: Macros with complex values should be enclosed in parenthesis
#43: FILE: tests/tcg/tricore/macros.h:27:
+#define EREG_RS2_HI %d9

ERROR: spaces required around that '%' (ctx:WxV)
#44: FILE: tests/tcg/tricore/macros.h:28:
+#define EREG_CALC_RESULT %e8
                          ^

ERROR: Macros with complex values should be enclosed in parenthesis
#44: FILE: tests/tcg/tricore/macros.h:28:
+#define EREG_CALC_RESULT %e8

ERROR: spaces required around that '%' (ctx:WxV)
#45: FILE: tests/tcg/tricore/macros.h:29:
+#define EREG_CALC_RESULT_HI %d9
                             ^

ERROR: Macros with complex values should be enclosed in parenthesis
#45: FILE: tests/tcg/tricore/macros.h:29:
+#define EREG_CALC_RESULT_HI %d9

ERROR: spaces required around that '%' (ctx:WxV)
#46: FILE: tests/tcg/tricore/macros.h:30:
+#define EREG_CALC_RESULT_LO %d8
                             ^

ERROR: Macros with complex values should be enclosed in parenthesis
#46: FILE: tests/tcg/tricore/macros.h:30:
+#define EREG_CALC_RESULT_LO %d8

ERROR: spaces required around that '%' (ctx:WxV)
#47: FILE: tests/tcg/tricore/macros.h:31:
+#define EREG_CORRECT_RESULT_LO %d0
                                ^

ERROR: Macros with complex values should be enclosed in parenthesis
#47: FILE: tests/tcg/tricore/macros.h:31:
+#define EREG_CORRECT_RESULT_LO %d0

ERROR: spaces required around that '%' (ctx:WxV)
#48: FILE: tests/tcg/tricore/macros.h:32:
+#define EREG_CORRECT_RESULT_HI %d1
                                ^

ERROR: Macros with complex values should be enclosed in parenthesis
#48: FILE: tests/tcg/tricore/macros.h:32:
+#define EREG_CORRECT_RESULT_HI %d1

ERROR: spaces required around that ':' (ctx:VxE)
#58: FILE: tests/tcg/tricore/macros.h:43:
+test_ ## num:                                              \
             ^

WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#85: 
new file mode 100644

total: 23 errors, 1 warnings, 69 lines checked

Patch 19/30 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

20/30 Checking commit b41e172b1c1b (tests/tcg/tricore: Add fadd test)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#30: 
new file mode 100644

total: 0 errors, 1 warnings, 23 lines checked

Patch 20/30 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
21/30 Checking commit 0bcb010ab78c (tests/tcg/tricore: Add fmul test)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#30: 
new file mode 100644

total: 0 errors, 1 warnings, 15 lines checked

Patch 21/30 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
22/30 Checking commit 03bcac9b31c0 (tests/tcg/tricore: Add ftoi test)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#49: 
new file mode 100644

total: 0 errors, 1 warnings, 30 lines checked

Patch 22/30 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
23/30 Checking commit 6abe70e64dae (tests/tcg/tricore: Add madd test)
ERROR: spaces required around that '%' (ctx:WxV)
#38: FILE: tests/tcg/tricore/macros.h:12:
+#define DREG_RS3 %d4
                  ^

ERROR: Macros with complex values should be enclosed in parenthesis
#38: FILE: tests/tcg/tricore/macros.h:12:
+#define DREG_RS3 %d4

WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#67: 
new file mode 100644

total: 2 errors, 1 warnings, 48 lines checked

Patch 23/30 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

24/30 Checking commit a730630561a3 (tests/tcg/tricore: Add msub test)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#30: 
new file mode 100644

total: 0 errors, 1 warnings, 16 lines checked

Patch 24/30 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
25/30 Checking commit 279b264665ef (tests/tcg/tricore: Add muls test)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#30: 
new file mode 100644

total: 0 errors, 1 warnings, 16 lines checked

Patch 25/30 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
26/30 Checking commit bf6793bcf60c (tests/docker: gcc-10 based images for ppc64{, le} tests)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#83: 
deleted file mode 100644

total: 0 errors, 1 warnings, 96 lines checked

Patch 26/30 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
27/30 Checking commit 775ac5548c46 (tests/tcg/ppc64le: tests for brh/brw/brd)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#66: 
new file mode 100644

total: 0 errors, 1 warnings, 55 lines checked

Patch 27/30 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
28/30 Checking commit dbc4eac4eab3 (tests/tcg: add a multiarch signals test to stress test signal delivery)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#54: 
new file mode 100644

total: 0 errors, 1 warnings, 181 lines checked

Patch 28/30 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
29/30 Checking commit 68da1a516aaf (cirrus.yml: Fix the MSYS2 task)
30/30 Checking commit c91b027fedcc (configure: use cc, not host_cc to set cross_cc for build arch)
=== OUTPUT END ===

Test command exited with code: 1


The full log is available at
http://patchew.org/logs/20210504100223.25427-1-alex.bennee@linaro.org/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com

^ permalink raw reply	[flat|nested] 37+ messages in thread

* Re: [PATCH v2 01/30] checkpatch: Fix use of uninitialized value
  2021-05-04 10:01 ` [PATCH v2 01/30] checkpatch: Fix use of uninitialized value Alex Bennée
@ 2021-05-12  4:47   ` Philippe Mathieu-Daudé
  0 siblings, 0 replies; 37+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-12  4:47 UTC (permalink / raw)
  To: Alex Bennée, qemu-devel, QEMU Trivial
  Cc: fam, Isaku Yamahata, berrange, Greg Kurz, stefanha, crosa,
	pbonzini, aurelien

On 5/4/21 12:01 PM, Alex Bennée wrote:
> From: Greg Kurz <groug@kaod.org>
> 
> checkfilename() doesn't always set $acpi_testexpected. Fix the following
> warning:
> 
> Use of uninitialized value $acpi_testexpected in string eq at
>  ./scripts/checkpatch.pl line 1529.
> 
> Fixes: d2f1af0e4120 ("checkpatch: don't emit warning on newly created acpi data files")
> Signed-off-by: Greg Kurz <groug@kaod.org>
> Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> Cc: isaku.yamahata@intel.com
> Message-Id: <20210408164610.14229-1-alex.bennee@linaro.org>
> Message-Id: <161786467973.295167.5612704777283969903.stgit@bahia.lan>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> ---
>  scripts/checkpatch.pl | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
> index 8f7053ec9b..3d185cceac 100755
> --- a/scripts/checkpatch.pl
> +++ b/scripts/checkpatch.pl
> @@ -1532,6 +1532,7 @@ sub process {
>  		     ($line =~ /\{\s*([\w\/\.\-]*)\s*\=\>\s*([\w\/\.\-]*)\s*\}/ &&
>  		      (defined($1) || defined($2)))) &&
>                        !(($realfile ne '') &&
> +                        defined($acpi_testexpected) &&
>                          ($realfile eq $acpi_testexpected))) {
>  			$reported_maintainer_file = 1;
>  			WARN("added, moved or deleted file(s), does MAINTAINERS need updating?\n" . $herecurr);
> 

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>



^ permalink raw reply	[flat|nested] 37+ messages in thread

* Re: [PATCH v2 29/30] cirrus.yml: Fix the MSYS2 task
  2021-05-04 10:02 ` [PATCH v2 29/30] cirrus.yml: Fix the MSYS2 task Alex Bennée
@ 2021-05-12  4:49   ` Philippe Mathieu-Daudé
  2021-05-12  4:53     ` 罗勇刚(Yonggang Luo)
  2021-05-12  4:56   ` 罗勇刚(Yonggang Luo)
  1 sibling, 1 reply; 37+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-12  4:49 UTC (permalink / raw)
  To: Alex Bennée, qemu-devel
  Cc: fam, Thomas Huth, Ed Maste, Yonggang Luo, pbonzini, stefanha,
	crosa, berrange, Li-Wen Hsu, aurelien

Hi Yonggang Luo,

Does this look OK to you?

On 5/4/21 12:02 PM, Alex Bennée wrote:
> From: Thomas Huth <thuth@redhat.com>
> 
> The MSYS2 task in the Cirrus-CI is currently failing with error messages
> like this:
> 
>  warning: database file for 'ucrt64' does not exist (use '-Sy' to download)
>  :: Starting core system upgrade...
>   there is nothing to do
>  :: Starting full system upgrade...
>  error: failed to prepare transaction (could not find database)
> 
> Seems like it can be fixed by switching to a newer release and by refreshing
> the database one more time after changing the /etc/pacman.conf file.
> 
> Signed-off-by: Thomas Huth <thuth@redhat.com>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> Message-Id: <20210427185524.281883-1-thuth@redhat.com>
> ---
>  .cirrus.yml | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/.cirrus.yml b/.cirrus.yml
> index f53c519447..f4bf49b704 100644
> --- a/.cirrus.yml
> +++ b/.cirrus.yml
> @@ -67,7 +67,7 @@ windows_msys2_task:
>      CIRRUS_SHELL: powershell
>      MSYS: winsymlinks:nativestrict
>      MSYSTEM: MINGW64
> -    MSYS2_URL: https://github.com/msys2/msys2-installer/releases/download/2021-01-05/msys2-base-x86_64-20210105.sfx.exe
> +    MSYS2_URL: https://github.com/msys2/msys2-installer/releases/download/2021-04-19/msys2-base-x86_64-20210419.sfx.exe
>      MSYS2_FINGERPRINT: 0
>      MSYS2_PACKAGES: "
>        diffutils git grep make pkg-config sed
> @@ -130,7 +130,7 @@ windows_msys2_task:
>          taskkill /F /FI "MODULES eq msys-2.0.dll"
>          tasklist
>          C:\tools\msys64\usr\bin\bash.exe -lc "mv -f /etc/pacman.conf.pacnew /etc/pacman.conf || true"
> -        C:\tools\msys64\usr\bin\bash.exe -lc "pacman --noconfirm -Suu --overwrite=*"
> +        C:\tools\msys64\usr\bin\bash.exe -lc "pacman --noconfirm -Syuu --overwrite=*"
>          Write-Output "Core install time taken: $((Get-Date).Subtract($start_time))"
>          $start_time = Get-Date
>  
> 


^ permalink raw reply	[flat|nested] 37+ messages in thread

* Re: [PATCH v2 30/30] configure: use cc, not host_cc to set cross_cc for build arch
  2021-05-04 10:02 ` [PATCH v2 30/30] configure: use cc, not host_cc to set cross_cc for build arch Alex Bennée
@ 2021-05-12  4:50   ` Philippe Mathieu-Daudé
  0 siblings, 0 replies; 37+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-05-12  4:50 UTC (permalink / raw)
  To: Alex Bennée, qemu-devel
  Cc: fam, berrange, stefanha, crosa, pbonzini, aurelien

On 5/4/21 12:02 PM, Alex Bennée wrote:
> Otherwise you run into hilarity like trying when cross compiling a 32
> bit ARM build on a 64 bit system trying to use host_cc to build 32 bit
> test cases.
> 
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> ---
>  configure | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>



^ permalink raw reply	[flat|nested] 37+ messages in thread

* Re: [PATCH v2 29/30] cirrus.yml: Fix the MSYS2 task
  2021-05-12  4:49   ` Philippe Mathieu-Daudé
@ 2021-05-12  4:53     ` 罗勇刚(Yonggang Luo)
  0 siblings, 0 replies; 37+ messages in thread
From: 罗勇刚(Yonggang Luo) @ 2021-05-12  4:53 UTC (permalink / raw)
  To: Philippe Mathieu-Daudé
  Cc: Fam Zheng, Thomas Huth, Daniel P. Berrangé,
	qemu-level, Paolo Bonzini, Stefan Hajnoczi, Cleber Rosa,
	Ed Maste, Alex Bennée, Li-Wen Hsu, Aurelien Jarno

[-- Attachment #1: Type: text/plain, Size: 2358 bytes --]

LGTM, Thanks, forget to update this

On Wed, May 12, 2021 at 12:49 PM Philippe Mathieu-Daudé <f4bug@amsat.org>
wrote:

> Hi Yonggang Luo,
>
> Does this look OK to you?
>
> On 5/4/21 12:02 PM, Alex Bennée wrote:
> > From: Thomas Huth <thuth@redhat.com>
> >
> > The MSYS2 task in the Cirrus-CI is currently failing with error messages
> > like this:
> >
> >  warning: database file for 'ucrt64' does not exist (use '-Sy' to
> download)
> >  :: Starting core system upgrade...
> >   there is nothing to do
> >  :: Starting full system upgrade...
> >  error: failed to prepare transaction (could not find database)
> >
> > Seems like it can be fixed by switching to a newer release and by
> refreshing
> > the database one more time after changing the /etc/pacman.conf file.
> >
> > Signed-off-by: Thomas Huth <thuth@redhat.com>
> > Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> > Message-Id: <20210427185524.281883-1-thuth@redhat.com>
> > ---
> >  .cirrus.yml | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/.cirrus.yml b/.cirrus.yml
> > index f53c519447..f4bf49b704 100644
> > --- a/.cirrus.yml
> > +++ b/.cirrus.yml
> > @@ -67,7 +67,7 @@ windows_msys2_task:
> >      CIRRUS_SHELL: powershell
> >      MSYS: winsymlinks:nativestrict
> >      MSYSTEM: MINGW64
> > -    MSYS2_URL:
> https://github.com/msys2/msys2-installer/releases/download/2021-01-05/msys2-base-x86_64-20210105.sfx.exe
> > +    MSYS2_URL:
> https://github.com/msys2/msys2-installer/releases/download/2021-04-19/msys2-base-x86_64-20210419.sfx.exe
> >      MSYS2_FINGERPRINT: 0
> >      MSYS2_PACKAGES: "
> >        diffutils git grep make pkg-config sed
> > @@ -130,7 +130,7 @@ windows_msys2_task:
> >          taskkill /F /FI "MODULES eq msys-2.0.dll"
> >          tasklist
> >          C:\tools\msys64\usr\bin\bash.exe -lc "mv -f
> /etc/pacman.conf.pacnew /etc/pacman.conf || true"
> > -        C:\tools\msys64\usr\bin\bash.exe -lc "pacman --noconfirm -Suu
> --overwrite=*"
> > +        C:\tools\msys64\usr\bin\bash.exe -lc "pacman --noconfirm -Syuu
> --overwrite=*"
> >          Write-Output "Core install time taken:
> $((Get-Date).Subtract($start_time))"
> >          $start_time = Get-Date
> >
> >
>


-- 
         此致
礼
罗勇刚
Yours
    sincerely,
Yonggang Luo

[-- Attachment #2: Type: text/html, Size: 3644 bytes --]

^ permalink raw reply	[flat|nested] 37+ messages in thread

* Re: [PATCH v2 29/30] cirrus.yml: Fix the MSYS2 task
  2021-05-04 10:02 ` [PATCH v2 29/30] cirrus.yml: Fix the MSYS2 task Alex Bennée
  2021-05-12  4:49   ` Philippe Mathieu-Daudé
@ 2021-05-12  4:56   ` 罗勇刚(Yonggang Luo)
  1 sibling, 0 replies; 37+ messages in thread
From: 罗勇刚(Yonggang Luo) @ 2021-05-12  4:56 UTC (permalink / raw)
  To: Alex Bennée
  Cc: Fam Zheng, Thomas Huth, Daniel P. Berrangé,
	qemu-level, Philippe Mathieu-Daudé,
	Ed Maste, Stefan Hajnoczi, Cleber Rosa, Paolo Bonzini,
	Li-Wen Hsu, Aurelien Jarno

[-- Attachment #1: Type: text/plain, Size: 2176 bytes --]

Reviewed-by: Yonggang Luo <luoyonggang@gmail.com>

On Tue, May 4, 2021 at 6:09 PM Alex Bennée <alex.bennee@linaro.org> wrote:
>
> From: Thomas Huth <thuth@redhat.com>
>
> The MSYS2 task in the Cirrus-CI is currently failing with error messages
> like this:
>
>  warning: database file for 'ucrt64' does not exist (use '-Sy' to
download)
>  :: Starting core system upgrade...
>   there is nothing to do
>  :: Starting full system upgrade...
>  error: failed to prepare transaction (could not find database)
>
> Seems like it can be fixed by switching to a newer release and by
refreshing
> the database one more time after changing the /etc/pacman.conf file.
>
> Signed-off-by: Thomas Huth <thuth@redhat.com>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> Message-Id: <20210427185524.281883-1-thuth@redhat.com>
> ---
>  .cirrus.yml | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/.cirrus.yml b/.cirrus.yml
> index f53c519447..f4bf49b704 100644
> --- a/.cirrus.yml
> +++ b/.cirrus.yml
> @@ -67,7 +67,7 @@ windows_msys2_task:
>      CIRRUS_SHELL: powershell
>      MSYS: winsymlinks:nativestrict
>      MSYSTEM: MINGW64
> -    MSYS2_URL:
https://github.com/msys2/msys2-installer/releases/download/2021-01-05/msys2-base-x86_64-20210105.sfx.exe
> +    MSYS2_URL:
https://github.com/msys2/msys2-installer/releases/download/2021-04-19/msys2-base-x86_64-20210419.sfx.exe
>      MSYS2_FINGERPRINT: 0
>      MSYS2_PACKAGES: "
>        diffutils git grep make pkg-config sed
> @@ -130,7 +130,7 @@ windows_msys2_task:
>          taskkill /F /FI "MODULES eq msys-2.0.dll"
>          tasklist
>          C:\tools\msys64\usr\bin\bash.exe -lc "mv -f
/etc/pacman.conf.pacnew /etc/pacman.conf || true"
> -        C:\tools\msys64\usr\bin\bash.exe -lc "pacman --noconfirm -Suu
--overwrite=*"
> +        C:\tools\msys64\usr\bin\bash.exe -lc "pacman --noconfirm -Syuu
--overwrite=*"
>          Write-Output "Core install time taken:
$((Get-Date).Subtract($start_time))"
>          $start_time = Get-Date
>
> --
> 2.20.1
>


--
         此致
礼
罗勇刚
Yours
    sincerely,
Yonggang Luo

[-- Attachment #2: Type: text/html, Size: 3130 bytes --]

^ permalink raw reply	[flat|nested] 37+ messages in thread

end of thread, other threads:[~2021-05-12  4:58 UTC | newest]

Thread overview: 37+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-04 10:01 [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) Alex Bennée
2021-05-04 10:01 ` [PATCH v2 01/30] checkpatch: Fix use of uninitialized value Alex Bennée
2021-05-12  4:47   ` Philippe Mathieu-Daudé
2021-05-04 10:01 ` [PATCH v2 02/30] tests/docker: fix copying of executable in "update" Alex Bennée
2021-05-04 10:01 ` [PATCH v2 03/30] tests/docker: make executable an optional argument to "update" Alex Bennée
2021-05-04 10:01 ` [PATCH v2 04/30] tests/docker: allow "update" to add the current user Alex Bennée
2021-05-04 10:01 ` [PATCH v2 05/30] tests/docker: add "fetch" sub-command Alex Bennée
2021-05-04 10:01 ` [PATCH v2 06/30] docker: Add Hexagon image Alex Bennée
2021-05-04 10:02 ` [PATCH v2 07/30] tests/tcg: Use Hexagon Docker image Alex Bennée
2021-05-04 10:02 ` [PATCH v2 08/30] gitlab: add build-user-hexagon test Alex Bennée
2021-05-04 10:02 ` [PATCH v2 09/30] tests/tcg: don't iterate through other arch compilers Alex Bennée
2021-05-04 10:02 ` [PATCH v2 10/30] tests/docker: Added libbpf library to the docker files Alex Bennée
2021-05-04 10:02 ` [PATCH v2 11/30] tests/tcg: Add docker_as and docker_ld cmds Alex Bennée
2021-05-04 10:02 ` [PATCH v2 12/30] tests/tcg: Run timeout cmds using --foreground Alex Bennée
2021-05-04 10:02 ` [PATCH v2 13/30] hw/tricore: Add testdevice for tests in tests/tcg/ Alex Bennée
2021-05-04 10:02 ` [PATCH v2 14/30] tests/tcg/tricore: Add build infrastructure Alex Bennée
2021-05-04 10:02 ` [PATCH v2 15/30] configure: Emit HOST_CC to config-host.mak Alex Bennée
2021-05-04 10:02 ` [PATCH v2 16/30] tests/tcg/tricore: Add macros to create tests and first test 'abs' Alex Bennée
2021-05-04 10:02 ` [PATCH v2 17/30] tests/tcg/tricore: Add bmerge test Alex Bennée
2021-05-04 10:02 ` [PATCH v2 18/30] tests/tcg/tricore: Add clz test Alex Bennée
2021-05-04 10:02 ` [PATCH v2 19/30] tests/tcg/tricore: Add dvstep test Alex Bennée
2021-05-04 10:02 ` [PATCH v2 20/30] tests/tcg/tricore: Add fadd test Alex Bennée
2021-05-04 10:02 ` [PATCH v2 21/30] tests/tcg/tricore: Add fmul test Alex Bennée
2021-05-04 10:02 ` [PATCH v2 22/30] tests/tcg/tricore: Add ftoi test Alex Bennée
2021-05-04 10:02 ` [PATCH v2 23/30] tests/tcg/tricore: Add madd test Alex Bennée
2021-05-04 10:02 ` [PATCH v2 24/30] tests/tcg/tricore: Add msub test Alex Bennée
2021-05-04 10:02 ` [PATCH v2 25/30] tests/tcg/tricore: Add muls test Alex Bennée
2021-05-04 10:02 ` [PATCH v2 26/30] tests/docker: gcc-10 based images for ppc64{, le} tests Alex Bennée
2021-05-04 10:02 ` [PATCH v2 27/30] tests/tcg/ppc64le: tests for brh/brw/brd Alex Bennée
2021-05-04 10:02 ` [PATCH v2 28/30] tests/tcg: add a multiarch signals test to stress test signal delivery Alex Bennée
2021-05-04 10:02 ` [PATCH v2 29/30] cirrus.yml: Fix the MSYS2 task Alex Bennée
2021-05-12  4:49   ` Philippe Mathieu-Daudé
2021-05-12  4:53     ` 罗勇刚(Yonggang Luo)
2021-05-12  4:56   ` 罗勇刚(Yonggang Luo)
2021-05-04 10:02 ` [PATCH v2 30/30] configure: use cc, not host_cc to set cross_cc for build arch Alex Bennée
2021-05-12  4:50   ` Philippe Mathieu-Daudé
2021-05-04 10:39 ` [PATCH v2 00/30] testing/next (hexagon, tricore, ppc, signals, cirrus) no-reply

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).