From: Alistair Francis <alistair23@gmail.com>
To: Frank Chang <frank.chang@sifive.com>
Cc: "open list:RISC-V" <qemu-riscv@nongnu.org>,
Bin Meng <bin.meng@windriver.com>,
Richard Henderson <richard.henderson@linaro.org>,
"qemu-devel@nongnu.org Developers" <qemu-devel@nongnu.org>,
Alistair Francis <alistair.francis@wdc.com>,
Palmer Dabbelt <palmer@dabbelt.com>
Subject: Re: [PATCH v8 51/78] target/riscv: rvv-1.0: floating-point slide instructions
Date: Mon, 25 Oct 2021 16:13:44 +1000 [thread overview]
Message-ID: <CAKmqyKNsbkVh4Mu=apDu3j0D0noHi0yKjKVvJPTz_dqy62xiNQ@mail.gmail.com> (raw)
In-Reply-To: <20211015074627.3957162-59-frank.chang@sifive.com>
On Fri, Oct 15, 2021 at 6:38 PM <frank.chang@sifive.com> wrote:
>
> From: Frank Chang <frank.chang@sifive.com>
>
> Add the following instructions:
>
> * vfslide1up.vf
> * vfslide1down.vf
>
> Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Alistair
> ---
> target/riscv/helper.h | 7 ++
> target/riscv/insn32.decode | 2 +
> target/riscv/insn_trans/trans_rvv.c.inc | 16 +++
> target/riscv/vector_helper.c | 141 ++++++++++++++++--------
> 4 files changed, 121 insertions(+), 45 deletions(-)
>
> diff --git a/target/riscv/helper.h b/target/riscv/helper.h
> index 304c12494d4..012d0343771 100644
> --- a/target/riscv/helper.h
> +++ b/target/riscv/helper.h
> @@ -1071,6 +1071,13 @@ DEF_HELPER_6(vslide1down_vx_h, void, ptr, ptr, tl, ptr, env, i32)
> DEF_HELPER_6(vslide1down_vx_w, void, ptr, ptr, tl, ptr, env, i32)
> DEF_HELPER_6(vslide1down_vx_d, void, ptr, ptr, tl, ptr, env, i32)
>
> +DEF_HELPER_6(vfslide1up_vf_h, void, ptr, ptr, i64, ptr, env, i32)
> +DEF_HELPER_6(vfslide1up_vf_w, void, ptr, ptr, i64, ptr, env, i32)
> +DEF_HELPER_6(vfslide1up_vf_d, void, ptr, ptr, i64, ptr, env, i32)
> +DEF_HELPER_6(vfslide1down_vf_h, void, ptr, ptr, i64, ptr, env, i32)
> +DEF_HELPER_6(vfslide1down_vf_w, void, ptr, ptr, i64, ptr, env, i32)
> +DEF_HELPER_6(vfslide1down_vf_d, void, ptr, ptr, i64, ptr, env, i32)
> +
> DEF_HELPER_6(vrgather_vv_b, void, ptr, ptr, ptr, ptr, env, i32)
> DEF_HELPER_6(vrgather_vv_h, void, ptr, ptr, ptr, ptr, env, i32)
> DEF_HELPER_6(vrgather_vv_w, void, ptr, ptr, ptr, ptr, env, i32)
> diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode
> index 7548b71efdb..c5cc14c45c4 100644
> --- a/target/riscv/insn32.decode
> +++ b/target/riscv/insn32.decode
> @@ -577,6 +577,8 @@ vfsgnjn_vv 001001 . ..... ..... 001 ..... 1010111 @r_vm
> vfsgnjn_vf 001001 . ..... ..... 101 ..... 1010111 @r_vm
> vfsgnjx_vv 001010 . ..... ..... 001 ..... 1010111 @r_vm
> vfsgnjx_vf 001010 . ..... ..... 101 ..... 1010111 @r_vm
> +vfslide1up_vf 001110 . ..... ..... 101 ..... 1010111 @r_vm
> +vfslide1down_vf 001111 . ..... ..... 101 ..... 1010111 @r_vm
> vmfeq_vv 011000 . ..... ..... 001 ..... 1010111 @r_vm
> vmfeq_vf 011000 . ..... ..... 101 ..... 1010111 @r_vm
> vmfne_vv 011100 . ..... ..... 001 ..... 1010111 @r_vm
> diff --git a/target/riscv/insn_trans/trans_rvv.c.inc b/target/riscv/insn_trans/trans_rvv.c.inc
> index e59fc5a01d8..7ee1e122e8e 100644
> --- a/target/riscv/insn_trans/trans_rvv.c.inc
> +++ b/target/riscv/insn_trans/trans_rvv.c.inc
> @@ -3120,6 +3120,22 @@ GEN_OPIVX_TRANS(vslidedown_vx, slidedown_check)
> GEN_OPIVX_TRANS(vslide1down_vx, slidedown_check)
> GEN_OPIVI_TRANS(vslidedown_vi, IMM_ZX, vslidedown_vx, slidedown_check)
>
> +/* Vector Floating-Point Slide Instructions */
> +static bool fslideup_check(DisasContext *s, arg_rmrr *a)
> +{
> + return slideup_check(s, a) &&
> + require_rvf(s);
> +}
> +
> +static bool fslidedown_check(DisasContext *s, arg_rmrr *a)
> +{
> + return slidedown_check(s, a) &&
> + require_rvf(s);
> +}
> +
> +GEN_OPFVF_TRANS(vfslide1up_vf, fslideup_check)
> +GEN_OPFVF_TRANS(vfslide1down_vf, fslidedown_check)
> +
> /* Vector Register Gather Instruction */
> static bool vrgather_vv_check(DisasContext *s, arg_rmrr *a)
> {
> diff --git a/target/riscv/vector_helper.c b/target/riscv/vector_helper.c
> index d79f59e443e..7fa5189af4e 100644
> --- a/target/riscv/vector_helper.c
> +++ b/target/riscv/vector_helper.c
> @@ -4455,57 +4455,108 @@ GEN_VEXT_VSLIDEDOWN_VX(vslidedown_vx_h, uint16_t, H2)
> GEN_VEXT_VSLIDEDOWN_VX(vslidedown_vx_w, uint32_t, H4)
> GEN_VEXT_VSLIDEDOWN_VX(vslidedown_vx_d, uint64_t, H8)
>
> -#define GEN_VEXT_VSLIDE1UP_VX(NAME, ETYPE, H) \
> -void HELPER(NAME)(void *vd, void *v0, target_ulong s1, void *vs2, \
> - CPURISCVState *env, uint32_t desc) \
> -{ \
> - uint32_t vm = vext_vm(desc); \
> - uint32_t vl = env->vl; \
> - uint32_t i; \
> - \
> - for (i = 0; i < vl; i++) { \
> - if (!vm && !vext_elem_mask(v0, i)) { \
> - continue; \
> - } \
> - if (i == 0) { \
> - *((ETYPE *)vd + H(i)) = s1; \
> - } else { \
> - *((ETYPE *)vd + H(i)) = *((ETYPE *)vs2 + H(i - 1)); \
> - } \
> - } \
> +#define GEN_VEXT_VSLIE1UP(ESZ, H) \
> +static void vslide1up_##ESZ(void *vd, void *v0, target_ulong s1, void *vs2, \
> + CPURISCVState *env, uint32_t desc) \
> +{ \
> + typedef uint##ESZ##_t ETYPE; \
> + uint32_t vm = vext_vm(desc); \
> + uint32_t vl = env->vl; \
> + uint32_t i; \
> + \
> + for (i = 0; i < vl; i++) { \
> + if (!vm && !vext_elem_mask(v0, i)) { \
> + continue; \
> + } \
> + if (i == 0) { \
> + *((ETYPE *)vd + H(i)) = s1; \
> + } else { \
> + *((ETYPE *)vd + H(i)) = *((ETYPE *)vs2 + H(i - 1)); \
> + } \
> + } \
> +}
> +
> +GEN_VEXT_VSLIE1UP(8, H1)
> +GEN_VEXT_VSLIE1UP(16, H2)
> +GEN_VEXT_VSLIE1UP(32, H4)
> +GEN_VEXT_VSLIE1UP(64, H8)
> +
> +#define GEN_VEXT_VSLIDE1UP_VX(NAME, ESZ) \
> +void HELPER(NAME)(void *vd, void *v0, target_ulong s1, void *vs2, \
> + CPURISCVState *env, uint32_t desc) \
> +{ \
> + vslide1up_##ESZ(vd, v0, s1, vs2, env, desc); \
> }
>
> /* vslide1up.vx vd, vs2, rs1, vm # vd[0]=x[rs1], vd[i+1] = vs2[i] */
> -GEN_VEXT_VSLIDE1UP_VX(vslide1up_vx_b, uint8_t, H1)
> -GEN_VEXT_VSLIDE1UP_VX(vslide1up_vx_h, uint16_t, H2)
> -GEN_VEXT_VSLIDE1UP_VX(vslide1up_vx_w, uint32_t, H4)
> -GEN_VEXT_VSLIDE1UP_VX(vslide1up_vx_d, uint64_t, H8)
> -
> -#define GEN_VEXT_VSLIDE1DOWN_VX(NAME, ETYPE, H) \
> -void HELPER(NAME)(void *vd, void *v0, target_ulong s1, void *vs2, \
> - CPURISCVState *env, uint32_t desc) \
> -{ \
> - uint32_t vm = vext_vm(desc); \
> - uint32_t vl = env->vl; \
> - uint32_t i; \
> - \
> - for (i = 0; i < vl; i++) { \
> - if (!vm && !vext_elem_mask(v0, i)) { \
> - continue; \
> - } \
> - if (i == vl - 1) { \
> - *((ETYPE *)vd + H(i)) = s1; \
> - } else { \
> - *((ETYPE *)vd + H(i)) = *((ETYPE *)vs2 + H(i + 1)); \
> - } \
> - } \
> +GEN_VEXT_VSLIDE1UP_VX(vslide1up_vx_b, 8)
> +GEN_VEXT_VSLIDE1UP_VX(vslide1up_vx_h, 16)
> +GEN_VEXT_VSLIDE1UP_VX(vslide1up_vx_w, 32)
> +GEN_VEXT_VSLIDE1UP_VX(vslide1up_vx_d, 64)
> +
> +#define GEN_VEXT_VSLIDE1DOWN(ESZ, H) \
> +static void vslide1down_##ESZ(void *vd, void *v0, target_ulong s1, void *vs2, \
> + CPURISCVState *env, uint32_t desc) \
> +{ \
> + typedef uint##ESZ##_t ETYPE; \
> + uint32_t vm = vext_vm(desc); \
> + uint32_t vl = env->vl; \
> + uint32_t i; \
> + \
> + for (i = 0; i < vl; i++) { \
> + if (!vm && !vext_elem_mask(v0, i)) { \
> + continue; \
> + } \
> + if (i == vl - 1) { \
> + *((ETYPE *)vd + H(i)) = s1; \
> + } else { \
> + *((ETYPE *)vd + H(i)) = *((ETYPE *)vs2 + H(i + 1)); \
> + } \
> + } \
> +}
> +
> +GEN_VEXT_VSLIDE1DOWN(8, H1)
> +GEN_VEXT_VSLIDE1DOWN(16, H2)
> +GEN_VEXT_VSLIDE1DOWN(32, H4)
> +GEN_VEXT_VSLIDE1DOWN(64, H8)
> +
> +#define GEN_VEXT_VSLIDE1DOWN_VX(NAME, ESZ) \
> +void HELPER(NAME)(void *vd, void *v0, target_ulong s1, void *vs2, \
> + CPURISCVState *env, uint32_t desc) \
> +{ \
> + vslide1down_##ESZ(vd, v0, s1, vs2, env, desc); \
> }
>
> /* vslide1down.vx vd, vs2, rs1, vm # vd[i] = vs2[i+1], vd[vl-1]=x[rs1] */
> -GEN_VEXT_VSLIDE1DOWN_VX(vslide1down_vx_b, uint8_t, H1)
> -GEN_VEXT_VSLIDE1DOWN_VX(vslide1down_vx_h, uint16_t, H2)
> -GEN_VEXT_VSLIDE1DOWN_VX(vslide1down_vx_w, uint32_t, H4)
> -GEN_VEXT_VSLIDE1DOWN_VX(vslide1down_vx_d, uint64_t, H8)
> +GEN_VEXT_VSLIDE1DOWN_VX(vslide1down_vx_b, 8)
> +GEN_VEXT_VSLIDE1DOWN_VX(vslide1down_vx_h, 16)
> +GEN_VEXT_VSLIDE1DOWN_VX(vslide1down_vx_w, 32)
> +GEN_VEXT_VSLIDE1DOWN_VX(vslide1down_vx_d, 64)
> +
> +/* Vector Floating-Point Slide Instructions */
> +#define GEN_VEXT_VFSLIDE1UP_VF(NAME, ESZ) \
> +void HELPER(NAME)(void *vd, void *v0, uint64_t s1, void *vs2, \
> + CPURISCVState *env, uint32_t desc) \
> +{ \
> + vslide1up_##ESZ(vd, v0, s1, vs2, env, desc); \
> +}
> +
> +/* vfslide1up.vf vd, vs2, rs1, vm # vd[0]=f[rs1], vd[i+1] = vs2[i] */
> +GEN_VEXT_VFSLIDE1UP_VF(vfslide1up_vf_h, 16)
> +GEN_VEXT_VFSLIDE1UP_VF(vfslide1up_vf_w, 32)
> +GEN_VEXT_VFSLIDE1UP_VF(vfslide1up_vf_d, 64)
> +
> +#define GEN_VEXT_VFSLIDE1DOWN_VF(NAME, ESZ) \
> +void HELPER(NAME)(void *vd, void *v0, uint64_t s1, void *vs2, \
> + CPURISCVState *env, uint32_t desc) \
> +{ \
> + vslide1down_##ESZ(vd, v0, s1, vs2, env, desc); \
> +}
> +
> +/* vfslide1down.vf vd, vs2, rs1, vm # vd[i] = vs2[i+1], vd[vl-1]=f[rs1] */
> +GEN_VEXT_VFSLIDE1DOWN_VF(vfslide1down_vf_h, 16)
> +GEN_VEXT_VFSLIDE1DOWN_VF(vfslide1down_vf_w, 32)
> +GEN_VEXT_VFSLIDE1DOWN_VF(vfslide1down_vf_d, 64)
>
> /* Vector Register Gather Instruction */
> #define GEN_VEXT_VRGATHER_VV(NAME, TS1, TS2, HS1, HS2) \
> --
> 2.25.1
>
>
next prev parent reply other threads:[~2021-10-25 6:16 UTC|newest]
Thread overview: 120+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-15 7:45 [PATCH v8 00/78] support vector extension v1.0 frank.chang
2021-10-15 7:45 ` [PATCH v8 01/78] target/riscv: fix TB_FLAGS bits overlapping bug for rvv/rvh frank.chang
2021-10-16 3:04 ` Richard Henderson
2021-10-17 22:55 ` Alistair Francis
2021-10-18 5:38 ` Richard Henderson
2021-10-18 6:01 ` Alistair Francis
2021-10-15 7:45 ` [PATCH v8 02/78] target/riscv: drop vector 0.7.1 and add 1.0 support frank.chang
2021-10-15 7:45 ` [PATCH v8 03/78] target/riscv: Use FIELD_EX32() to extract wd field frank.chang
2021-10-15 7:45 ` [PATCH v8 04/78] target/riscv: rvv-1.0: add mstatus VS field frank.chang
2021-10-15 7:45 ` [PATCH v8 05/78] target/riscv: rvv-1.0: add sstatus " frank.chang
2021-10-15 7:45 ` [PATCH v8 06/78] target/riscv: rvv-1.0: introduce writable misa.v field frank.chang
2021-10-15 7:45 ` [PATCH v8 07/78] target/riscv: rvv-1.0: add translation-time vector context status frank.chang
2021-10-15 7:45 ` [PATCH v8 08/78] target/riscv: rvv-1.0: remove rvv related codes from fcsr registers frank.chang
2021-10-15 7:45 ` [PATCH v8 09/78] target/riscv: rvv-1.0: add vcsr register frank.chang
2021-10-15 7:45 ` [PATCH v8 10/78] target/riscv: rvv-1.0: add vlenb register frank.chang
2021-10-15 7:45 ` [PATCH v8 11/78] target/riscv: rvv-1.0: check MSTATUS_VS when accessing vector csr registers frank.chang
2021-10-15 7:45 ` [PATCH v8 12/78] target/riscv: rvv-1.0: remove MLEN calculations frank.chang
2021-10-15 7:45 ` [PATCH v8 13/78] target/riscv: rvv-1.0: add fractional LMUL frank.chang
2021-10-15 7:45 ` [PATCH v8 14/78] target/riscv: rvv-1.0: add VMA and VTA frank.chang
2021-10-15 7:45 ` [PATCH v8 15/78] target/riscv: rvv-1.0: update check functions frank.chang
2021-10-15 7:45 ` [PATCH v8 16/78] target/riscv: introduce more imm value modes in translator functions frank.chang
2021-10-15 7:45 ` [PATCH v8 17/78] target/riscv: rvv:1.0: add translation-time nan-box helper function frank.chang
2021-10-15 7:45 ` [PATCH 18/76] target/riscv: rvv-1.0: configure instructions frank.chang
2021-10-15 7:45 ` [PATCH v8 18/78] target/riscv: rvv-1.0: remove amo operations instructions frank.chang
2021-10-18 5:44 ` Alistair Francis
2021-10-15 7:45 ` [PATCH v8 19/78] target/riscv: rvv-1.0: configure instructions frank.chang
2021-10-15 7:45 ` [PATCH 19/76] target/riscv: rvv-1.0: stride load and store instructions frank.chang
2021-10-15 7:45 ` [PATCH 20/76] target/riscv: rvv-1.0: index " frank.chang
2021-10-15 7:45 ` [PATCH v8 20/78] target/riscv: rvv-1.0: stride " frank.chang
2021-10-15 7:45 ` [PATCH 21/76] target/riscv: rvv-1.0: fix address index overflow bug of indexed load/store insns frank.chang
2021-10-15 7:45 ` [PATCH v8 21/78] target/riscv: rvv-1.0: index load and store instructions frank.chang
2021-10-15 7:45 ` [PATCH 22/76] target/riscv: rvv-1.0: fault-only-first unit stride load frank.chang
2021-10-15 7:45 ` [PATCH v8 22/78] target/riscv: rvv-1.0: fix address index overflow bug of indexed load/store insns frank.chang
2021-10-15 7:45 ` [PATCH 23/76] target/riscv: rvv-1.0: amo operations frank.chang
2021-10-15 7:45 ` [PATCH v8 23/78] target/riscv: rvv-1.0: fault-only-first unit stride load frank.chang
2021-10-15 7:45 ` [PATCH v8 24/78] target/riscv: rvv-1.0: load/store whole register instructions frank.chang
2021-10-15 7:45 ` [PATCH v8 25/78] target/riscv: rvv-1.0: update vext_max_elems() for load/store insns frank.chang
2021-10-15 7:45 ` [PATCH v8 26/78] target/riscv: rvv-1.0: take fractional LMUL into vector max elements calculation frank.chang
2021-10-15 7:45 ` [PATCH v8 27/78] target/riscv: rvv-1.0: floating-point square-root instruction frank.chang
2021-10-15 7:45 ` [PATCH v8 28/78] target/riscv: rvv-1.0: floating-point classify instructions frank.chang
2021-10-15 7:45 ` [PATCH v8 29/78] target/riscv: rvv-1.0: count population in mask instruction frank.chang
2021-10-18 5:46 ` Alistair Francis
2021-10-15 7:45 ` [PATCH 29/76] target/riscv: rvv-1.0: mask population count instruction frank.chang
2021-10-15 7:45 ` [PATCH v8 30/78] target/riscv: rvv-1.0: find-first-set mask bit instruction frank.chang
2021-10-18 5:47 ` Alistair Francis
2021-10-15 7:45 ` [PATCH v8 31/78] target/riscv: rvv-1.0: set-X-first mask bit instructions frank.chang
2021-10-18 5:53 ` Alistair Francis
2021-10-15 7:45 ` [PATCH v8 32/78] target/riscv: rvv-1.0: iota instruction frank.chang
2021-10-18 5:49 ` Alistair Francis
2021-10-15 7:45 ` [PATCH v8 33/78] target/riscv: rvv-1.0: element index instruction frank.chang
2021-10-18 5:54 ` Alistair Francis
2021-10-15 7:45 ` [PATCH v8 34/78] target/riscv: rvv-1.0: allow load element with sign-extended frank.chang
2021-10-21 4:28 ` Alistair Francis
2021-10-15 7:45 ` [PATCH v8 35/78] target/riscv: rvv-1.0: register gather instructions frank.chang
2021-10-15 7:45 ` [PATCH v8 36/78] target/riscv: rvv-1.0: integer scalar move instructions frank.chang
2021-10-21 4:24 ` Alistair Francis
2021-10-15 7:45 ` [PATCH v8 37/78] target/riscv: rvv-1.0: floating-point move instruction frank.chang
2021-10-15 7:45 ` [PATCH v8 38/78] target/riscv: rvv-1.0: floating-point scalar move instructions frank.chang
2021-10-21 4:26 ` Alistair Francis
2021-10-15 7:45 ` [PATCH v8 39/78] target/riscv: rvv-1.0: whole register " frank.chang
2021-10-21 4:27 ` Alistair Francis
2021-10-15 7:45 ` [PATCH v8 40/78] target/riscv: rvv-1.0: integer extension instructions frank.chang
2021-10-15 7:45 ` [PATCH v8 41/78] target/riscv: rvv-1.0: single-width averaging add and subtract instructions frank.chang
2021-10-15 7:45 ` [PATCH v8 42/78] target/riscv: rvv-1.0: single-width bit shift instructions frank.chang
2021-10-15 7:45 ` [PATCH v8 43/78] target/riscv: rvv-1.0: integer add-with-carry/subtract-with-borrow frank.chang
2021-10-25 6:08 ` Alistair Francis
2021-10-15 7:45 ` [PATCH v8 44/78] target/riscv: rvv-1.0: narrowing integer right shift instructions frank.chang
2021-10-15 7:45 ` [PATCH v8 45/78] target/riscv: rvv-1.0: widening integer multiply-add instructions frank.chang
2021-10-15 7:45 ` [PATCH v8 46/78] target/riscv: rvv-1.0: single-width saturating add and subtract instructions frank.chang
2021-10-15 7:45 ` [PATCH v8 47/78] target/riscv: rvv-1.0: integer comparison instructions frank.chang
2021-10-15 7:45 ` [PATCH v8 48/78] target/riscv: rvv-1.0: floating-point compare instructions frank.chang
2021-10-15 7:45 ` [PATCH v8 49/78] target/riscv: rvv-1.0: mask-register logical instructions frank.chang
2021-10-15 7:45 ` [PATCH v8 50/78] target/riscv: rvv-1.0: slide instructions frank.chang
2021-10-15 7:45 ` [PATCH v8 51/78] target/riscv: rvv-1.0: floating-point " frank.chang
2021-10-25 6:13 ` Alistair Francis [this message]
2021-10-15 7:46 ` [PATCH v8 52/78] target/riscv: rvv-1.0: narrowing fixed-point clip instructions frank.chang
2021-10-15 7:46 ` [PATCH v8 53/78] target/riscv: rvv-1.0: single-width floating-point reduction frank.chang
2021-10-15 7:46 ` [PATCH v8 54/78] target/riscv: rvv-1.0: widening floating-point reduction instructions frank.chang
2021-10-15 7:46 ` [PATCH v8 55/78] target/riscv: rvv-1.0: single-width scaling shift instructions frank.chang
2021-10-15 7:46 ` [PATCH v8 56/78] target/riscv: rvv-1.0: remove widening saturating scaled multiply-add frank.chang
2021-10-15 7:46 ` [PATCH v8 57/78] target/riscv: rvv-1.0: remove vmford.vv and vmford.vf frank.chang
2021-10-15 7:46 ` [PATCH v8 58/78] target/riscv: rvv-1.0: remove integer extract instruction frank.chang
2021-10-15 7:46 ` [PATCH v8 59/78] target/riscv: rvv-1.0: floating-point min/max instructions frank.chang
2021-10-15 7:46 ` [PATCH v8 60/78] target/riscv: introduce floating-point rounding mode enum frank.chang
2021-10-15 7:46 ` [PATCH v8 61/78] target/riscv: rvv-1.0: floating-point/integer type-convert instructions frank.chang
2021-10-25 6:16 ` Alistair Francis
2021-10-15 7:46 ` [PATCH v8 62/78] target/riscv: rvv-1.0: widening floating-point/integer type-convert frank.chang
2021-10-26 6:29 ` Alistair Francis
2021-10-15 7:46 ` [PATCH v8 63/78] target/riscv: add "set round to odd" rounding mode helper function frank.chang
2021-10-26 6:30 ` Alistair Francis
2021-10-15 7:46 ` [PATCH v8 64/78] target/riscv: rvv-1.0: narrowing floating-point/integer type-convert frank.chang
2021-10-26 6:32 ` Alistair Francis
2021-10-15 7:46 ` [PATCH v8 65/78] target/riscv: rvv-1.0: relax RV_VLEN_MAX to 1024-bits frank.chang
2021-10-25 6:43 ` Alistair Francis
2021-10-15 7:46 ` [PATCH v8 66/78] target/riscv: rvv-1.0: implement vstart CSR frank.chang
2021-10-15 7:46 ` [PATCH v8 67/78] target/riscv: rvv-1.0: trigger illegal instruction exception if frm is not valid frank.chang
2021-10-15 7:46 ` [PATCH v8 68/78] target/riscv: rvv-1.0: set mstatus.SD bit when writing vector CSRs frank.chang
2021-10-15 7:46 ` [PATCH v8 69/78] target/riscv: gdb: support vector registers for rv64 & rv32 frank.chang
2021-10-15 7:46 ` [PATCH v8 70/78] target/riscv: rvv-1.0: floating-point reciprocal square-root estimate instruction frank.chang
2021-10-15 7:46 ` [PATCH v8 71/78] target/riscv: rvv-1.0: floating-point reciprocal " frank.chang
2021-10-15 7:46 ` [PATCH v8 72/78] target/riscv: set mstatus.SD bit when writing fp CSRs frank.chang
2021-10-25 6:42 ` Alistair Francis
2021-10-15 7:46 ` [PATCH v8 73/78] target/riscv: rvv-1.0: rename r2_zimm to r2_zimm11 frank.chang
2021-10-26 6:50 ` Alistair Francis
2021-10-15 7:46 ` [PATCH v8 74/78] target/riscv: rvv-1.0: add vsetivli instruction frank.chang
2021-10-26 6:52 ` Alistair Francis
2021-10-15 7:46 ` [PATCH v8 75/78] target/riscv: rvv-1.0: add evl parameter to vext_ldst_us() frank.chang
2021-10-15 7:46 ` [PATCH v8 76/78] target/riscv: rvv-1.0: add vector unit-stride mask load/store insns frank.chang
2021-10-15 7:46 ` [PATCH v8 77/78] target/riscv: rvv-1.0: rename vmandnot.mm and vmornot.mm to vmandn.mm and vmorn.mm frank.chang
2021-10-26 6:55 ` Alistair Francis
2021-10-15 7:46 ` [PATCH v8 78/78] target/riscv: rvv-1.0: update opivv_vadc_check() comment frank.chang
2021-10-26 6:49 ` Alistair Francis
2021-10-15 9:02 ` [PATCH v8 00/78] support vector extension v1.0 Frank Chang
2021-10-18 6:00 ` Alistair Francis
2021-10-18 6:09 ` Frank Chang
2021-10-18 6:12 ` Alistair Francis
2021-10-18 6:17 ` Frank Chang
2021-10-18 9:01 ` LIU Zhiwei
2021-10-18 9:34 ` LIU Zhiwei
2021-10-20 5:28 ` Alistair Francis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAKmqyKNsbkVh4Mu=apDu3j0D0noHi0yKjKVvJPTz_dqy62xiNQ@mail.gmail.com' \
--to=alistair23@gmail.com \
--cc=alistair.francis@wdc.com \
--cc=bin.meng@windriver.com \
--cc=frank.chang@sifive.com \
--cc=palmer@dabbelt.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).