From: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org> To: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org> Cc: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org, rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org, Michael Walle <michael-QKn5cuLxLXY@public.gmane.org>, linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Subject: [PATCH v2 07/12] I2C: MV64XXX: Add Device Tree support Date: Tue, 3 Jul 2012 16:22:40 +0200 [thread overview] Message-ID: <1341325365-21393-8-git-send-email-andrew@lunn.ch> (raw) In-Reply-To: <1341325365-21393-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org> Extends the driver to get properties from device tree. Also extend the kirkwood DT support to supply the needed properties. Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org> --- Documentation/devicetree/bindings/i2c/mrvl-i2c.txt | 32 ++++++++++++++++- arch/arm/boot/dts/kirkwood.dtsi | 13 +++++++ arch/arm/mach-kirkwood/board-dt.c | 2 ++ drivers/i2c/busses/i2c-mv64xxx.c | 38 +++++++++++++++++--- 4 files changed, 79 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt index b891ee2..90d09d2 100644 --- a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt @@ -1,4 +1,4 @@ -* I2C +* Marvell MMP I2C controller Required properties : @@ -32,3 +32,33 @@ Examples: interrupts = <58>; }; +* Marvell MV64XXX I2C controller + +Required properties : + + - reg : Offset and length of the register set for the device + - compatible : should be "marvell,mv64xxx-i2c" + - interrupts : the interrupt number + - frequency-m : m factor in baud rate calculation + - frequency-n : n factor in baud rate calculation + - timeout-ms : How long to wait for a transaction to complete + +Baud Rate: + +The baud rate is calculated thus: + +Fscl = Ftclk + ------------------------------------------ + (frequency-n + 1) + 10 *(frequency-m + 1) * 2 + +Examples: + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + interrupts = <29>; + frequency-m = <4>; + frequency-n = <4>; + timeout-ms = <1000>; + }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index c9f36e7..c8bc122 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -81,5 +81,18 @@ /* set partition map and/or chip-delay in board dts */ status = "disabled"; }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + interrupt = <29>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <29>; + frequency-m = <8>; + frequency-n = <3>; + timeout-ms = <1000>; + status = "disable"; + }; }; }; diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 8f8da5d..24c8fdd 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -28,6 +28,8 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = { struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", + NULL), {}, }; diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 4f44a33..2146984 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -18,6 +18,9 @@ #include <linux/mv643xx_i2c.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_i2c.h> /* Register defines */ #define MV64XXX_I2C_REG_SLAVE_ADDR 0x00 @@ -528,7 +531,7 @@ mv64xxx_i2c_probe(struct platform_device *pd) struct mv64xxx_i2c_pdata *pdata = pd->dev.platform_data; int rc; - if ((pd->id != 0) || !pdata) + if ((!pdata && !pd->dev.of_node) || (pdata && (pd->id != 0))) return -ENODEV; drv_data = kzalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL); @@ -546,19 +549,35 @@ mv64xxx_i2c_probe(struct platform_device *pd) init_waitqueue_head(&drv_data->waitq); spin_lock_init(&drv_data->lock); - drv_data->freq_m = pdata->freq_m; - drv_data->freq_n = pdata->freq_n; - drv_data->irq = platform_get_irq(pd, 0); + if (pd->dev.of_node) { + of_property_read_u32(pd->dev.of_node, "frequency-m", + &drv_data->freq_m); + of_property_read_u32(pd->dev.of_node, "frequency-n", + &drv_data->freq_n); + drv_data->irq = irq_of_parse_and_map(pd->dev.of_node, 0); + } else { + drv_data->freq_m = pdata->freq_m; + drv_data->freq_n = pdata->freq_n; + drv_data->irq = platform_get_irq(pd, 0); + } + if (drv_data->irq < 0) { rc = -ENXIO; goto exit_unmap_regs; } + drv_data->adapter.dev.parent = &pd->dev; drv_data->adapter.algo = &mv64xxx_i2c_algo; drv_data->adapter.owner = THIS_MODULE; drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; - drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout); + if (pd->dev.of_node) + drv_data->adapter.timeout = msecs_to_jiffies( + of_property_read_u32(pd->dev.of_node, "timeout-ms", + &drv_data->freq_n)); + else + drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout); drv_data->adapter.nr = pd->id; + drv_data->adapter.dev.of_node = pd->dev.of_node; platform_set_drvdata(pd, drv_data); i2c_set_adapdata(&drv_data->adapter, drv_data); @@ -577,6 +596,8 @@ mv64xxx_i2c_probe(struct platform_device *pd) goto exit_free_irq; } + of_i2c_register_devices(&drv_data->adapter); + return 0; exit_free_irq: @@ -602,12 +623,19 @@ mv64xxx_i2c_remove(struct platform_device *dev) return rc; } +static const struct of_device_id mv64xxx_i2c_of_match_table[] __devinitdata = { + { .compatible = "marvell,mv64xxx-i2c", }, + {} +}; +MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table); + static struct platform_driver mv64xxx_i2c_driver = { .probe = mv64xxx_i2c_probe, .remove = __devexit_p(mv64xxx_i2c_remove), .driver = { .owner = THIS_MODULE, .name = MV64XXX_I2C_CTLR_NAME, + .of_match_table = of_match_ptr(mv64xxx_i2c_of_match_table), }, }; -- 1.7.10 ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
WARNING: multiple messages have this Message-ID (diff)
From: andrew@lunn.ch (Andrew Lunn) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 07/12] I2C: MV64XXX: Add Device Tree support Date: Tue, 3 Jul 2012 16:22:40 +0200 [thread overview] Message-ID: <1341325365-21393-8-git-send-email-andrew@lunn.ch> (raw) In-Reply-To: <1341325365-21393-1-git-send-email-andrew@lunn.ch> Extends the driver to get properties from device tree. Also extend the kirkwood DT support to supply the needed properties. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- Documentation/devicetree/bindings/i2c/mrvl-i2c.txt | 32 ++++++++++++++++- arch/arm/boot/dts/kirkwood.dtsi | 13 +++++++ arch/arm/mach-kirkwood/board-dt.c | 2 ++ drivers/i2c/busses/i2c-mv64xxx.c | 38 +++++++++++++++++--- 4 files changed, 79 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt index b891ee2..90d09d2 100644 --- a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt @@ -1,4 +1,4 @@ -* I2C +* Marvell MMP I2C controller Required properties : @@ -32,3 +32,33 @@ Examples: interrupts = <58>; }; +* Marvell MV64XXX I2C controller + +Required properties : + + - reg : Offset and length of the register set for the device + - compatible : should be "marvell,mv64xxx-i2c" + - interrupts : the interrupt number + - frequency-m : m factor in baud rate calculation + - frequency-n : n factor in baud rate calculation + - timeout-ms : How long to wait for a transaction to complete + +Baud Rate: + +The baud rate is calculated thus: + +Fscl = Ftclk + ------------------------------------------ + (frequency-n + 1) + 10 *(frequency-m + 1) * 2 + +Examples: + + i2c at 11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + interrupts = <29>; + frequency-m = <4>; + frequency-n = <4>; + timeout-ms = <1000>; + }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index c9f36e7..c8bc122 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -81,5 +81,18 @@ /* set partition map and/or chip-delay in board dts */ status = "disabled"; }; + + i2c at 11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + interrupt = <29>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <29>; + frequency-m = <8>; + frequency-n = <3>; + timeout-ms = <1000>; + status = "disable"; + }; }; }; diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 8f8da5d..24c8fdd 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -28,6 +28,8 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = { struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", + NULL), {}, }; diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 4f44a33..2146984 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -18,6 +18,9 @@ #include <linux/mv643xx_i2c.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_i2c.h> /* Register defines */ #define MV64XXX_I2C_REG_SLAVE_ADDR 0x00 @@ -528,7 +531,7 @@ mv64xxx_i2c_probe(struct platform_device *pd) struct mv64xxx_i2c_pdata *pdata = pd->dev.platform_data; int rc; - if ((pd->id != 0) || !pdata) + if ((!pdata && !pd->dev.of_node) || (pdata && (pd->id != 0))) return -ENODEV; drv_data = kzalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL); @@ -546,19 +549,35 @@ mv64xxx_i2c_probe(struct platform_device *pd) init_waitqueue_head(&drv_data->waitq); spin_lock_init(&drv_data->lock); - drv_data->freq_m = pdata->freq_m; - drv_data->freq_n = pdata->freq_n; - drv_data->irq = platform_get_irq(pd, 0); + if (pd->dev.of_node) { + of_property_read_u32(pd->dev.of_node, "frequency-m", + &drv_data->freq_m); + of_property_read_u32(pd->dev.of_node, "frequency-n", + &drv_data->freq_n); + drv_data->irq = irq_of_parse_and_map(pd->dev.of_node, 0); + } else { + drv_data->freq_m = pdata->freq_m; + drv_data->freq_n = pdata->freq_n; + drv_data->irq = platform_get_irq(pd, 0); + } + if (drv_data->irq < 0) { rc = -ENXIO; goto exit_unmap_regs; } + drv_data->adapter.dev.parent = &pd->dev; drv_data->adapter.algo = &mv64xxx_i2c_algo; drv_data->adapter.owner = THIS_MODULE; drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; - drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout); + if (pd->dev.of_node) + drv_data->adapter.timeout = msecs_to_jiffies( + of_property_read_u32(pd->dev.of_node, "timeout-ms", + &drv_data->freq_n)); + else + drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout); drv_data->adapter.nr = pd->id; + drv_data->adapter.dev.of_node = pd->dev.of_node; platform_set_drvdata(pd, drv_data); i2c_set_adapdata(&drv_data->adapter, drv_data); @@ -577,6 +596,8 @@ mv64xxx_i2c_probe(struct platform_device *pd) goto exit_free_irq; } + of_i2c_register_devices(&drv_data->adapter); + return 0; exit_free_irq: @@ -602,12 +623,19 @@ mv64xxx_i2c_remove(struct platform_device *dev) return rc; } +static const struct of_device_id mv64xxx_i2c_of_match_table[] __devinitdata = { + { .compatible = "marvell,mv64xxx-i2c", }, + {} +}; +MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table); + static struct platform_driver mv64xxx_i2c_driver = { .probe = mv64xxx_i2c_probe, .remove = __devexit_p(mv64xxx_i2c_remove), .driver = { .owner = THIS_MODULE, .name = MV64XXX_I2C_CTLR_NAME, + .of_match_table = of_match_ptr(mv64xxx_i2c_of_match_table), }, }; -- 1.7.10
next prev parent reply other threads:[~2012-07-03 14:22 UTC|newest] Thread overview: 130+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-07-03 14:22 [PATCH v2 00/12] IRQ, GPIO SPI, I2C, etc DTC support Andrew Lunn 2012-07-03 14:22 ` Andrew Lunn [not found] ` <1341325365-21393-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org> 2012-07-03 14:22 ` [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers Andrew Lunn 2012-07-03 14:22 ` Andrew Lunn 2012-07-05 8:15 ` Andrew Lunn [not found] ` <1341325365-21393-2-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org> 2012-07-05 9:02 ` Thomas Petazzoni 2012-07-05 9:02 ` Thomas Petazzoni 2012-07-05 9:48 ` Andrew Lunn 2012-07-05 9:48 ` Andrew Lunn 2012-07-05 10:11 ` Arnaud Patard 2012-07-05 10:11 ` Arnaud Patard (Rtp) [not found] ` <87sjd6ikkj.fsf-0gaJ4kiyQU6khWr4QmshqB2eb7JE58TQ@public.gmane.org> 2012-07-05 10:20 ` Thomas Petazzoni 2012-07-05 10:20 ` Thomas Petazzoni 2012-07-05 10:38 ` Arnaud Patard 2012-07-05 10:38 ` Arnaud Patard (Rtp) [not found] ` <87liiyijb8.fsf-0gaJ4kiyQU6khWr4QmshqB2eb7JE58TQ@public.gmane.org> 2012-07-05 11:42 ` Thomas Petazzoni 2012-07-05 11:42 ` Thomas Petazzoni 2012-07-05 11:48 ` Andrew Lunn 2012-07-05 11:48 ` Andrew Lunn [not found] ` <20120705114815.GT17534-g2DYL2Zd6BY@public.gmane.org> 2012-07-05 12:09 ` Sebastian Hesselbarth 2012-07-05 12:09 ` Sebastian Hesselbarth [not found] ` <20120705094824.GO17534-g2DYL2Zd6BY@public.gmane.org> 2012-07-05 10:10 ` Thomas Petazzoni 2012-07-05 10:10 ` Thomas Petazzoni 2012-07-05 10:25 ` Andrew Lunn 2012-07-05 10:25 ` Andrew Lunn 2012-07-05 12:58 ` Thomas Petazzoni 2012-07-05 12:58 ` Thomas Petazzoni 2012-07-05 13:15 ` Andrew Lunn 2012-07-05 13:15 ` Andrew Lunn [not found] ` <20120705131522.GW17534-g2DYL2Zd6BY@public.gmane.org> 2012-07-05 13:28 ` Thomas Petazzoni 2012-07-05 13:28 ` Thomas Petazzoni 2012-07-05 13:33 ` Andrew Lunn 2012-07-05 13:36 ` Thomas Petazzoni 2012-07-05 12:25 ` Arnd Bergmann 2012-07-05 12:25 ` Arnd Bergmann [not found] ` <201207051225.55390.arnd-r2nGTMty4D4@public.gmane.org> 2012-07-05 13:08 ` Andrew Lunn 2012-07-05 13:08 ` Andrew Lunn [not found] ` <20120705130819.GV17534-g2DYL2Zd6BY@public.gmane.org> 2012-07-05 13:47 ` Arnd Bergmann 2012-07-05 13:47 ` Arnd Bergmann [not found] ` <201207051347.38887.arnd-r2nGTMty4D4@public.gmane.org> 2012-07-05 13:54 ` Andrew Lunn 2012-07-05 13:54 ` Andrew Lunn [not found] ` <20120705135449.GZ17534-g2DYL2Zd6BY@public.gmane.org> 2012-07-05 15:47 ` Arnd Bergmann 2012-07-05 15:47 ` Arnd Bergmann 2012-07-05 14:14 ` Sebastian Hesselbarth 2012-07-05 14:14 ` Sebastian Hesselbarth [not found] ` <4FF5A15A.8070309-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org> 2012-07-05 14:43 ` Andrew Lunn 2012-07-05 14:43 ` Andrew Lunn 2012-07-05 14:54 ` Arnd Bergmann 2012-07-05 14:54 ` Arnd Bergmann [not found] ` <201207051454.24475.arnd-r2nGTMty4D4@public.gmane.org> 2012-07-05 15:51 ` Sebastian Hesselbarth 2012-07-05 15:51 ` Sebastian Hesselbarth [not found] ` <4FF5B7F9.9020507-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org> 2012-07-05 16:30 ` Arnaud Patard 2012-07-05 16:30 ` Arnaud Patard (Rtp) 2012-07-05 16:16 ` Andrew Lunn 2012-07-05 16:16 ` Andrew Lunn [not found] ` <20120705161600.GA28860-g2DYL2Zd6BY@public.gmane.org> 2012-07-06 20:08 ` Arnd Bergmann 2012-07-06 20:08 ` Arnd Bergmann [not found] ` <201207062008.23952.arnd-r2nGTMty4D4@public.gmane.org> 2012-07-06 21:00 ` Andrew Lunn 2012-07-06 21:00 ` Andrew Lunn [not found] ` <20120706210009.GC11470-g2DYL2Zd6BY@public.gmane.org> 2012-07-07 0:24 ` Where to put a large bootloader-supplied device tree on ARM ? Mitch Bradley 2012-07-07 0:24 ` Mitch Bradley [not found] ` <4FF781D8.3040206-D5eQfiDGL7eakBO8gow8eQ@public.gmane.org> 2012-07-07 1:23 ` David VomLehn (dvomlehn) 2012-07-07 1:23 ` David VomLehn (dvomlehn) [not found] ` <2966DB01BC317A4DA23684BA0F653415013701-WE/xwOPrfQKHONfmNwMhBaBKnGwkPULj@public.gmane.org> 2012-07-07 1:59 ` Mitch Bradley 2012-07-07 1:59 ` Mitch Bradley [not found] ` <4FF7980E.7050705-D5eQfiDGL7eakBO8gow8eQ@public.gmane.org> 2012-07-09 4:30 ` Nicolas Pitre 2012-07-09 4:30 ` Nicolas Pitre [not found] ` <alpine.LFD.2.02.1207090015270.31100-QuJgVwGFrdf/9pzu0YdTqQ@public.gmane.org> 2012-07-12 6:52 ` Mitch Bradley 2012-07-12 6:52 ` Mitch Bradley [not found] ` <4FFE743B.6080504-D5eQfiDGL7eakBO8gow8eQ@public.gmane.org> 2012-07-12 18:16 ` Nicolas Pitre 2012-07-12 18:16 ` Nicolas Pitre 2012-07-12 20:34 ` Rob Herring 2012-07-12 20:34 ` [U-Boot] " Rob Herring 2012-07-12 20:34 ` Rob Herring 2012-07-12 21:38 ` Albert ARIBAUD 2012-07-12 21:38 ` [U-Boot] " Albert ARIBAUD 2012-07-12 21:38 ` Albert ARIBAUD 2012-07-12 21:47 ` Wolfgang Denk 2012-07-12 21:47 ` [U-Boot] " Wolfgang Denk 2012-07-12 21:47 ` Wolfgang Denk 2012-07-13 1:28 ` Rob Herring 2012-07-13 1:28 ` [U-Boot] " Rob Herring 2012-07-13 1:28 ` Rob Herring [not found] ` <4FFF79B6.6040508-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2012-07-13 6:45 ` Albert ARIBAUD 2012-07-13 6:45 ` Albert ARIBAUD 2012-07-13 6:45 ` Albert ARIBAUD 2012-07-05 18:36 ` [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers Mitch Bradley 2012-07-05 18:36 ` Mitch Bradley 2012-07-03 14:22 ` [PATCH v2 02/12] SPI: Refactor spi-orion to use SPI framework queue Andrew Lunn 2012-07-03 14:22 ` Andrew Lunn 2012-07-03 14:22 ` [PATCH v2 03/12] spi-orion: remove uneeded spi_info Andrew Lunn 2012-07-03 14:22 ` Andrew Lunn 2012-07-03 14:22 ` [PATCH v2 04/12] spi-orion: add device tree binding Andrew Lunn 2012-07-03 14:22 ` Andrew Lunn 2012-07-03 14:22 ` [PATCH v2 05/12] ARM: kirkwood: use devicetree for orion-spi Andrew Lunn 2012-07-03 14:22 ` Andrew Lunn 2012-07-03 14:22 ` [PATCH v2 06/12] ARM: kirkwood: use devicetree for SPI on dreamplug Andrew Lunn 2012-07-03 14:22 ` Andrew Lunn 2012-07-03 14:22 ` Andrew Lunn [this message] 2012-07-03 14:22 ` [PATCH v2 07/12] I2C: MV64XXX: Add Device Tree support Andrew Lunn [not found] ` <1341325365-21393-8-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org> 2012-07-03 15:59 ` Florian Fainelli 2012-07-03 15:59 ` Florian Fainelli 2012-07-03 16:58 ` Andrew Lunn 2012-07-03 16:58 ` Andrew Lunn [not found] ` <20120703165839.GA1519-g2DYL2Zd6BY@public.gmane.org> 2012-07-04 19:49 ` Florian Fainelli 2012-07-04 19:49 ` Florian Fainelli 2012-07-05 6:52 ` Andrew Lunn 2012-07-05 6:52 ` Andrew Lunn 2012-07-03 14:22 ` [PATCH v2 08/12] Kirkwood: Add basic device tree support for QNAP TS219 Andrew Lunn 2012-07-03 14:22 ` Andrew Lunn [not found] ` <1341325365-21393-9-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org> 2012-07-03 15:47 ` Florian Fainelli 2012-07-03 15:47 ` Florian Fainelli 2012-07-03 17:09 ` Andrew Lunn 2012-07-03 17:09 ` Andrew Lunn 2012-07-03 14:22 ` [PATCH v2 09/12] ARM: Kirkwood: DTify the watchdog timer Andrew Lunn 2012-07-03 14:22 ` Andrew Lunn 2012-07-03 14:22 ` [PATCH v2 10/12] ATA: sata_mv: Add device tree support Andrew Lunn 2012-07-03 14:22 ` Andrew Lunn 2012-07-03 14:22 ` [PATCH v2 11/12] ARM: Kirkwood: Use DT to configure SATA device Andrew Lunn 2012-07-03 14:22 ` Andrew Lunn [not found] ` <1341325365-21393-12-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org> 2012-07-03 14:52 ` Josh Coombs 2012-07-03 14:52 ` Josh Coombs [not found] ` <CAMW5Ufa2bsYs9VD2g9hJWKpcQNcZt+WXCA1ohYoHeLk9SambSg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2012-07-03 15:32 ` Andrew Lunn 2012-07-03 15:32 ` Andrew Lunn 2012-07-03 14:22 ` [PATCH v2 12/12] Crypto: CESA: Add support for DT based instantiation Andrew Lunn 2012-07-03 14:22 ` Andrew Lunn [not found] ` <1341325365-21393-13-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org> 2012-07-03 15:50 ` Florian Fainelli 2012-07-03 15:50 ` Florian Fainelli 2012-07-03 17:03 ` Andrew Lunn 2012-07-03 17:03 ` Andrew Lunn
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1341325365-21393-8-git-send-email-andrew@lunn.ch \ --to=andrew-g2dyl2zd6by@public.gmane.org \ --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \ --cc=jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=michael-QKn5cuLxLXY@public.gmane.org \ --cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \ --cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.