All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Viresh Kumar <viresh.kumar@linaro.org>,
	linux-pm@vger.kernel.org
Subject: [PATCH v2 03/15] clk: Add __clk_mux_determine_rate_closest
Date: Fri,  5 Sep 2014 15:47:22 -0700	[thread overview]
Message-ID: <1409957256-23729-4-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1409957256-23729-1-git-send-email-sboyd@codeaurora.org>

Some clock drivers want to find the closest rate on the input of
a mux instead of a rate that's less than or equal to the desired
rate. Add a generic mux function to support this.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk.c            | 47 +++++++++++++++++++++++++++++++++++---------
 include/linux/clk-provider.h |  9 +++++++--
 2 files changed, 45 insertions(+), 11 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index b76fa69b44cb..255ec8c92919 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -712,14 +712,20 @@ struct clk *__clk_lookup(const char *name)
 	return NULL;
 }
 
-/*
- * Helper for finding best parent to provide a given frequency. This can be used
- * directly as a determine_rate callback (e.g. for a mux), or from a more
- * complex clock that may combine a mux with other operations.
- */
-long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate,
-			      unsigned long *best_parent_rate,
-			      struct clk **best_parent_p)
+static bool mux_is_better_rate(unsigned long rate, unsigned long now,
+			   unsigned long best, unsigned long flags)
+{
+	if (flags & CLK_MUX_ROUND_CLOSEST)
+		return abs(now - rate) < abs(best - rate);
+
+	return now <= rate && now > best;
+}
+
+static long
+clk_mux_determine_rate_flags(struct clk_hw *hw, unsigned long rate,
+			     unsigned long *best_parent_rate,
+			     struct clk **best_parent_p,
+			     unsigned long flags)
 {
 	struct clk *clk = hw->clk, *parent, *best_parent = NULL;
 	int i, num_parents;
@@ -747,7 +753,7 @@ long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate,
 			parent_rate = __clk_round_rate(parent, rate);
 		else
 			parent_rate = __clk_get_rate(parent);
-		if (parent_rate <= rate && parent_rate > best) {
+		if (mux_is_better_rate(rate, parent_rate, best, flags)) {
 			best_parent = parent;
 			best = parent_rate;
 		}
@@ -760,8 +766,31 @@ out:
 
 	return best;
 }
+
+/*
+ * Helper for finding best parent to provide a given frequency. This can be used
+ * directly as a determine_rate callback (e.g. for a mux), or from a more
+ * complex clock that may combine a mux with other operations.
+ */
+long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate,
+			      unsigned long *best_parent_rate,
+			      struct clk **best_parent_p)
+{
+	return clk_mux_determine_rate_flags(hw, rate, best_parent_rate,
+					    best_parent_p, 0);
+}
 EXPORT_SYMBOL_GPL(__clk_mux_determine_rate);
 
+long __clk_mux_determine_rate_closest(struct clk_hw *hw, unsigned long rate,
+			      unsigned long *best_parent_rate,
+			      struct clk **best_parent_p)
+{
+	return clk_mux_determine_rate_flags(hw, rate, best_parent_rate,
+					    best_parent_p,
+					    CLK_MUX_ROUND_CLOSEST);
+}
+EXPORT_SYMBOL_GPL(__clk_mux_determine_rate_closest);
+
 /***        clk api        ***/
 
 void __clk_unprepare(struct clk *clk)
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 48a92e318542..ba97e25c1115 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -372,6 +372,8 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name,
  *	register, and mask of mux bits are in higher 16-bit of this register.
  *	While setting the mux bits, higher 16-bit should also be updated to
  *	indicate changing mux bits.
+ * CLK_MUX_ROUND_CLOSEST - Use the parent rate that is closest to the desired
+ *	frequency.
  */
 struct clk_mux {
 	struct clk_hw	hw;
@@ -386,7 +388,8 @@ struct clk_mux {
 #define CLK_MUX_INDEX_ONE		BIT(0)
 #define CLK_MUX_INDEX_BIT		BIT(1)
 #define CLK_MUX_HIWORD_MASK		BIT(2)
-#define CLK_MUX_READ_ONLY	BIT(3) /* mux setting cannot be changed */
+#define CLK_MUX_READ_ONLY		BIT(3) /* mux can't be changed */
+#define CLK_MUX_ROUND_CLOSEST		BIT(4)
 
 extern const struct clk_ops clk_mux_ops;
 extern const struct clk_ops clk_mux_ro_ops;
@@ -529,7 +532,9 @@ struct clk *__clk_lookup(const char *name);
 long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate,
 			      unsigned long *best_parent_rate,
 			      struct clk **best_parent_p);
-
+long __clk_mux_determine_rate_closest(struct clk_hw *hw, unsigned long rate,
+			      unsigned long *best_parent_rate,
+			      struct clk **best_parent_p);
 /*
  * FIXME clock api without lock protection
  */
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 03/15] clk: Add __clk_mux_determine_rate_closest
Date: Fri,  5 Sep 2014 15:47:22 -0700	[thread overview]
Message-ID: <1409957256-23729-4-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1409957256-23729-1-git-send-email-sboyd@codeaurora.org>

Some clock drivers want to find the closest rate on the input of
a mux instead of a rate that's less than or equal to the desired
rate. Add a generic mux function to support this.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk.c            | 47 +++++++++++++++++++++++++++++++++++---------
 include/linux/clk-provider.h |  9 +++++++--
 2 files changed, 45 insertions(+), 11 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index b76fa69b44cb..255ec8c92919 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -712,14 +712,20 @@ struct clk *__clk_lookup(const char *name)
 	return NULL;
 }
 
-/*
- * Helper for finding best parent to provide a given frequency. This can be used
- * directly as a determine_rate callback (e.g. for a mux), or from a more
- * complex clock that may combine a mux with other operations.
- */
-long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate,
-			      unsigned long *best_parent_rate,
-			      struct clk **best_parent_p)
+static bool mux_is_better_rate(unsigned long rate, unsigned long now,
+			   unsigned long best, unsigned long flags)
+{
+	if (flags & CLK_MUX_ROUND_CLOSEST)
+		return abs(now - rate) < abs(best - rate);
+
+	return now <= rate && now > best;
+}
+
+static long
+clk_mux_determine_rate_flags(struct clk_hw *hw, unsigned long rate,
+			     unsigned long *best_parent_rate,
+			     struct clk **best_parent_p,
+			     unsigned long flags)
 {
 	struct clk *clk = hw->clk, *parent, *best_parent = NULL;
 	int i, num_parents;
@@ -747,7 +753,7 @@ long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate,
 			parent_rate = __clk_round_rate(parent, rate);
 		else
 			parent_rate = __clk_get_rate(parent);
-		if (parent_rate <= rate && parent_rate > best) {
+		if (mux_is_better_rate(rate, parent_rate, best, flags)) {
 			best_parent = parent;
 			best = parent_rate;
 		}
@@ -760,8 +766,31 @@ out:
 
 	return best;
 }
+
+/*
+ * Helper for finding best parent to provide a given frequency. This can be used
+ * directly as a determine_rate callback (e.g. for a mux), or from a more
+ * complex clock that may combine a mux with other operations.
+ */
+long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate,
+			      unsigned long *best_parent_rate,
+			      struct clk **best_parent_p)
+{
+	return clk_mux_determine_rate_flags(hw, rate, best_parent_rate,
+					    best_parent_p, 0);
+}
 EXPORT_SYMBOL_GPL(__clk_mux_determine_rate);
 
+long __clk_mux_determine_rate_closest(struct clk_hw *hw, unsigned long rate,
+			      unsigned long *best_parent_rate,
+			      struct clk **best_parent_p)
+{
+	return clk_mux_determine_rate_flags(hw, rate, best_parent_rate,
+					    best_parent_p,
+					    CLK_MUX_ROUND_CLOSEST);
+}
+EXPORT_SYMBOL_GPL(__clk_mux_determine_rate_closest);
+
 /***        clk api        ***/
 
 void __clk_unprepare(struct clk *clk)
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 48a92e318542..ba97e25c1115 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -372,6 +372,8 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name,
  *	register, and mask of mux bits are in higher 16-bit of this register.
  *	While setting the mux bits, higher 16-bit should also be updated to
  *	indicate changing mux bits.
+ * CLK_MUX_ROUND_CLOSEST - Use the parent rate that is closest to the desired
+ *	frequency.
  */
 struct clk_mux {
 	struct clk_hw	hw;
@@ -386,7 +388,8 @@ struct clk_mux {
 #define CLK_MUX_INDEX_ONE		BIT(0)
 #define CLK_MUX_INDEX_BIT		BIT(1)
 #define CLK_MUX_HIWORD_MASK		BIT(2)
-#define CLK_MUX_READ_ONLY	BIT(3) /* mux setting cannot be changed */
+#define CLK_MUX_READ_ONLY		BIT(3) /* mux can't be changed */
+#define CLK_MUX_ROUND_CLOSEST		BIT(4)
 
 extern const struct clk_ops clk_mux_ops;
 extern const struct clk_ops clk_mux_ro_ops;
@@ -529,7 +532,9 @@ struct clk *__clk_lookup(const char *name);
 long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate,
 			      unsigned long *best_parent_rate,
 			      struct clk **best_parent_p);
-
+long __clk_mux_determine_rate_closest(struct clk_hw *hw, unsigned long rate,
+			      unsigned long *best_parent_rate,
+			      struct clk **best_parent_p);
 /*
  * FIXME clock api without lock protection
  */
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

  parent reply	other threads:[~2014-09-05 22:47 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-05 22:47 [PATCH v2 00/15] Krait clocks + Krait CPUfreq Stephen Boyd
2014-09-05 22:47 ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 01/15] clk: mux: Add unregistration API Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 02/15] clk: mux: Split out register accessors for reuse Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` Stephen Boyd [this message]
2014-09-05 22:47   ` [PATCH v2 03/15] clk: Add __clk_mux_determine_rate_closest Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 04/15] clk: divider: Make generic for usage elsewhere Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-10-03 18:07   ` Stephen Boyd
2014-10-03 18:07     ` Stephen Boyd
2014-10-07 17:27     ` Srinivas Kandagatla
2014-10-07 17:27       ` Srinivas Kandagatla
2014-10-07 18:26       ` Stephen Boyd
2014-10-07 18:26         ` Stephen Boyd
2014-10-07 19:28         ` Srinivas Kandagatla
2014-10-07 19:28           ` Srinivas Kandagatla
2014-10-08 15:04         ` Srinivas Kandagatla
2014-10-08 15:04           ` Srinivas Kandagatla
2014-09-05 22:47 ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 05/15] clk: Add safe switch hook Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 06/15] clk: Avoid sending high rates to downstream clocks during set_rate Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 07/15] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 08/15] clk: qcom: Add HFPLL driver Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 09/15] clk: qcom: Add MSM8960/APQ8064's HFPLLs Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 10/15] clk: qcom: Add IPQ806X's HFPLLs Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 11/15] clk: qcom: Add support for Krait clocks Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 12/15] clk: qcom: Add KPSS ACC/GCC driver Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 13/15] clk: qcom: Add Krait clock controller driver Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 14/15] cpufreq: Add module to register cpufreq on Krait CPUs Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-08  4:46   ` Viresh Kumar
2014-09-08  4:46     ` Viresh Kumar
2014-09-08  4:46     ` Viresh Kumar
2014-09-08 17:15     ` Christopher Covington
2014-09-08 17:15       ` Christopher Covington
2014-09-08 17:15       ` Christopher Covington
2014-09-09  0:37     ` Stephen Boyd
2014-09-09  0:37       ` Stephen Boyd
2014-09-09  0:37       ` Stephen Boyd
2014-09-09  4:53       ` Viresh Kumar
2014-09-09  4:53         ` Viresh Kumar
2014-09-09  4:53         ` Viresh Kumar
2014-09-05 22:47 ` Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 15/15] ARM: dts: qcom: Add necessary DT data for Krait cpufreq Stephen Boyd
2014-09-05 22:47   ` Stephen Boyd
2014-09-08  9:42 ` [PATCH v2 00/15] Krait clocks + Krait CPUfreq Pramod Gurav
2014-09-08  9:42   ` Pramod Gurav
2014-09-08  9:42   ` Pramod Gurav
2014-09-08 11:59   ` Pramod Gurav
2014-09-08 11:59     ` Pramod Gurav

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1409957256-23729-4-git-send-email-sboyd@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mturquette@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.