All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Zhang Rui <rui.zhang@intel.com>,
	Eduardo Valentin <edubezval@gmail.com>
Cc: Chen-Yu Tsai <wens@csie.org>, Hans de Goede <hdegoede@redhat.com>,
	linux-input@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org
Subject: [PATCH v3 5/9] ARM: dts: sun7i: cubietruck: add axp209 regulator nodes
Date: Mon, 12 Jan 2015 12:34:05 +0800	[thread overview]
Message-ID: <1421037249-28461-6-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1421037249-28461-1-git-send-email-wens@csie.org>

This patch adds the regulator nodes for the axp209 by including
the axp209 dtsi. As the inputs of these regulators are from the
axp209's PS output, which is basically just a mux over the 2
inputs, it is considered to be unregulated. Thus we do not provide
input supply properties for them.

The regulator names and constraints are based on the board
schematics and the SoC datasheet.

DCDC2 is used as the cpu power supply. This patch also references
it from the cpu node.

Also get rid of axp209 properties already set in axp209.dtsi.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---

changes since v2:

    none

changes since v1:

    - Use preprocessor include for axp209.dtsi

---
 arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 35 ++++++++++++++++++++++++++----
 1 file changed, 31 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 77bc7e79cab9..5f817b65ceea 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -130,13 +130,9 @@
 			status = "okay";
 
 			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
 				reg = <0x34>;
 				interrupt-parent = <&nmi_intc>;
 				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
 			};
 		};
 
@@ -222,3 +218,34 @@
 		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+#include "axp209.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
-- 
2.1.4


WARNING: multiple messages have this Message-ID (diff)
From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 5/9] ARM: dts: sun7i: cubietruck: add axp209 regulator nodes
Date: Mon, 12 Jan 2015 12:34:05 +0800	[thread overview]
Message-ID: <1421037249-28461-6-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1421037249-28461-1-git-send-email-wens@csie.org>

This patch adds the regulator nodes for the axp209 by including
the axp209 dtsi. As the inputs of these regulators are from the
axp209's PS output, which is basically just a mux over the 2
inputs, it is considered to be unregulated. Thus we do not provide
input supply properties for them.

The regulator names and constraints are based on the board
schematics and the SoC datasheet.

DCDC2 is used as the cpu power supply. This patch also references
it from the cpu node.

Also get rid of axp209 properties already set in axp209.dtsi.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---

changes since v2:

    none

changes since v1:

    - Use preprocessor include for axp209.dtsi

---
 arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 35 ++++++++++++++++++++++++++----
 1 file changed, 31 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 77bc7e79cab9..5f817b65ceea 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -130,13 +130,9 @@
 			status = "okay";
 
 			axp209: pmic at 34 {
-				compatible = "x-powers,axp209";
 				reg = <0x34>;
 				interrupt-parent = <&nmi_intc>;
 				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
 			};
 		};
 
@@ -222,3 +218,34 @@
 		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+#include "axp209.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
-- 
2.1.4

  parent reply	other threads:[~2015-01-12  4:34 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-12  4:34 [PATCH v3 0/9] ARM: sunxi: Support cpufreq on sun[457]i Chen-Yu Tsai
2015-01-12  4:34 ` Chen-Yu Tsai
2015-01-12  4:34 ` [PATCH v3 1/9] Input: sun4i-ts: Add thermal zone sensor support Chen-Yu Tsai
2015-01-12  4:34   ` Chen-Yu Tsai
2015-01-12 12:08   ` Eduardo Valentin
2015-01-12 12:08     ` Eduardo Valentin
2015-01-12  4:34 ` [PATCH v3 2/9] ARM: dts: sunxi: Add dtsi for AXP209 PMIC Chen-Yu Tsai
2015-01-12  4:34   ` Chen-Yu Tsai
2015-01-12  4:34 ` [PATCH v3 3/9] ARM: dts: sun7i: Add cpu thermal zones to dtsi Chen-Yu Tsai
2015-01-12  4:34   ` Chen-Yu Tsai
2015-01-12  4:34 ` [PATCH v3 4/9] ARM: dts: sun7i: cubieboard2: add axp209 regulator nodes Chen-Yu Tsai
2015-01-12  4:34   ` Chen-Yu Tsai
2015-01-12  9:06   ` Maxime Ripard
2015-01-12  9:06     ` Maxime Ripard
2015-01-12  9:38     ` Chen-Yu Tsai
2015-01-12  9:38       ` Chen-Yu Tsai
2015-01-13  9:40       ` Maxime Ripard
2015-01-13  9:40         ` Maxime Ripard
2015-01-13 10:30         ` Chen-Yu Tsai
2015-01-13 10:30           ` Chen-Yu Tsai
2015-01-14 19:30           ` Maxime Ripard
2015-01-14 19:30             ` Maxime Ripard
2015-01-12  4:34 ` Chen-Yu Tsai [this message]
2015-01-12  4:34   ` [PATCH v3 5/9] ARM: dts: sun7i: cubietruck: " Chen-Yu Tsai
2015-01-12  4:34 ` [PATCH v3 6/9] ARM: dts: sun5i: Add cpu thermal zones to dtsi Chen-Yu Tsai
2015-01-12  4:34   ` Chen-Yu Tsai
2015-01-12  4:34 ` [PATCH v3 7/9] ARM: dts: sun5i: hsg-h702: add axp209 regulator nodes Chen-Yu Tsai
2015-01-12  4:34   ` Chen-Yu Tsai
2015-01-12  4:34 ` [PATCH v3 8/9] ARM: dts: sun4i: Add cpu thermal zones to dtsi Chen-Yu Tsai
2015-01-12  4:34   ` Chen-Yu Tsai
2015-01-12  4:34 ` [PATCH v3 9/9] ARM: dts: sun4i: cubieboard: add axp209 regulator nodes Chen-Yu Tsai
2015-01-12  4:34   ` Chen-Yu Tsai
2015-01-12  9:10 ` [PATCH v3 0/9] ARM: sunxi: Support cpufreq on sun[457]i Maxime Ripard
2015-01-12  9:10   ` Maxime Ripard
2015-01-13 13:53   ` Maxime Ripard
2015-01-13 13:53     ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1421037249-28461-6-git-send-email-wens@csie.org \
    --to=wens@csie.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=edubezval@gmail.com \
    --cc=hdegoede@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=maxime.ripard@free-electrons.com \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.