All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>, Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
	alsa-devel@alsa-project.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subject: [PATCH 1/2] ASoC: atmel: simplify Kconfig
Date: Tue, 26 May 2015 00:04:18 +0200	[thread overview]
Message-ID: <1432591459-22613-1-git-send-email-alexandre.belloni@free-electrons.com> (raw)

Enclose the options in if SND_ATMEL_SOC ... endif to remove the dependency.
Also remove the useless description for SND_ATMEL_SOC_SSC.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 sound/soc/atmel/Kconfig | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
index e7d08806f3e9..93abe4e6d596 100644
--- a/sound/soc/atmel/Kconfig
+++ b/sound/soc/atmel/Kconfig
@@ -6,27 +6,22 @@ config SND_ATMEL_SOC
 	  the ATMEL SSC interface. You will also need
 	  to select the audio interfaces to support below.
 
+if SND_ATMEL_SOC
+
 config SND_ATMEL_SOC_PDC
 	tristate
-	depends on SND_ATMEL_SOC
 
 config SND_ATMEL_SOC_DMA
 	tristate
-	depends on SND_ATMEL_SOC
 	select SND_SOC_GENERIC_DMAENGINE_PCM
 
 config SND_ATMEL_SOC_SSC
 	tristate
-	depends on SND_ATMEL_SOC
-	help
-	  Say Y or M if you want to add support for codecs the
-	  ATMEL SSC interface. You will also needs to select the individual
-	  machine drivers to support below.
 
 config SND_AT91_SOC_SAM9G20_WM8731
 	tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
 	depends on ARCH_AT91 || COMPILE_TEST
-	depends on ATMEL_SSC && SND_ATMEL_SOC && SND_SOC_I2C_AND_SPI
+	depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI
 	select SND_ATMEL_SOC_PDC
 	select SND_ATMEL_SOC_SSC
 	select SND_SOC_WM8731
@@ -37,7 +32,7 @@ config SND_AT91_SOC_SAM9G20_WM8731
 config SND_ATMEL_SOC_WM8904
 	tristate "Atmel ASoC driver for boards using WM8904 codec"
 	depends on ARCH_AT91 || COMPILE_TEST
-	depends on ATMEL_SSC && SND_ATMEL_SOC && I2C
+	depends on ATMEL_SSC && I2C
 	select SND_ATMEL_SOC_SSC
 	select SND_ATMEL_SOC_DMA
 	select SND_SOC_WM8904
@@ -48,10 +43,11 @@ config SND_ATMEL_SOC_WM8904
 config SND_AT91_SOC_SAM9X5_WM8731
 	tristate "SoC Audio support for WM8731-based at91sam9x5 board"
 	depends on ARCH_AT91 || COMPILE_TEST
-	depends on ATMEL_SSC && SND_ATMEL_SOC && SND_SOC_I2C_AND_SPI
+	depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI
 	select SND_ATMEL_SOC_SSC
 	select SND_ATMEL_SOC_DMA
 	select SND_SOC_WM8731
 	help
 	  Say Y if you want to add support for audio SoC on an
 	  at91sam9x5 based board that is using WM8731 codec.
+endif
-- 
2.1.4


WARNING: multiple messages have this Message-ID (diff)
From: alexandre.belloni@free-electrons.com (Alexandre Belloni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ASoC: atmel: simplify Kconfig
Date: Tue, 26 May 2015 00:04:18 +0200	[thread overview]
Message-ID: <1432591459-22613-1-git-send-email-alexandre.belloni@free-electrons.com> (raw)

Enclose the options in if SND_ATMEL_SOC ... endif to remove the dependency.
Also remove the useless description for SND_ATMEL_SOC_SSC.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 sound/soc/atmel/Kconfig | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
index e7d08806f3e9..93abe4e6d596 100644
--- a/sound/soc/atmel/Kconfig
+++ b/sound/soc/atmel/Kconfig
@@ -6,27 +6,22 @@ config SND_ATMEL_SOC
 	  the ATMEL SSC interface. You will also need
 	  to select the audio interfaces to support below.
 
+if SND_ATMEL_SOC
+
 config SND_ATMEL_SOC_PDC
 	tristate
-	depends on SND_ATMEL_SOC
 
 config SND_ATMEL_SOC_DMA
 	tristate
-	depends on SND_ATMEL_SOC
 	select SND_SOC_GENERIC_DMAENGINE_PCM
 
 config SND_ATMEL_SOC_SSC
 	tristate
-	depends on SND_ATMEL_SOC
-	help
-	  Say Y or M if you want to add support for codecs the
-	  ATMEL SSC interface. You will also needs to select the individual
-	  machine drivers to support below.
 
 config SND_AT91_SOC_SAM9G20_WM8731
 	tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
 	depends on ARCH_AT91 || COMPILE_TEST
-	depends on ATMEL_SSC && SND_ATMEL_SOC && SND_SOC_I2C_AND_SPI
+	depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI
 	select SND_ATMEL_SOC_PDC
 	select SND_ATMEL_SOC_SSC
 	select SND_SOC_WM8731
@@ -37,7 +32,7 @@ config SND_AT91_SOC_SAM9G20_WM8731
 config SND_ATMEL_SOC_WM8904
 	tristate "Atmel ASoC driver for boards using WM8904 codec"
 	depends on ARCH_AT91 || COMPILE_TEST
-	depends on ATMEL_SSC && SND_ATMEL_SOC && I2C
+	depends on ATMEL_SSC && I2C
 	select SND_ATMEL_SOC_SSC
 	select SND_ATMEL_SOC_DMA
 	select SND_SOC_WM8904
@@ -48,10 +43,11 @@ config SND_ATMEL_SOC_WM8904
 config SND_AT91_SOC_SAM9X5_WM8731
 	tristate "SoC Audio support for WM8731-based at91sam9x5 board"
 	depends on ARCH_AT91 || COMPILE_TEST
-	depends on ATMEL_SSC && SND_ATMEL_SOC && SND_SOC_I2C_AND_SPI
+	depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI
 	select SND_ATMEL_SOC_SSC
 	select SND_ATMEL_SOC_DMA
 	select SND_SOC_WM8731
 	help
 	  Say Y if you want to add support for audio SoC on an
 	  at91sam9x5 based board that is using WM8731 codec.
+endif
-- 
2.1.4

             reply	other threads:[~2015-05-25 22:04 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-25 22:04 Alexandre Belloni [this message]
2015-05-25 22:04 ` [PATCH 1/2] ASoC: atmel: simplify Kconfig Alexandre Belloni
2015-05-25 22:04 ` [PATCH 2/2] ASoC: atmel: compile pcm driver in snd-soc-atmel_ssc_dai Alexandre Belloni
2015-05-25 22:04   ` Alexandre Belloni
2015-05-26  9:53   ` Mark Brown
2015-05-26  9:53     ` Mark Brown
2015-05-26  9:53     ` Mark Brown
2015-05-26 10:14   ` Nicolas Ferre
2015-05-26 10:14     ` Nicolas Ferre
2015-05-26 10:14     ` Nicolas Ferre
2015-05-26 10:53   ` Arnd Bergmann
2015-05-26 10:53     ` Arnd Bergmann
2015-05-26 10:53     ` Arnd Bergmann
2015-05-27  7:50   ` Paul Bolle
2015-05-27  7:50     ` Paul Bolle
2015-05-27  9:19     ` Alexandre Belloni
2015-05-27  9:19       ` Alexandre Belloni
2015-05-27  9:25       ` Paul Bolle
2015-05-27  9:25         ` Paul Bolle
2015-05-28  9:36         ` Alexandre Belloni
2015-05-28  9:36           ` Alexandre Belloni
2015-05-26  9:53 ` [PATCH 1/2] ASoC: atmel: simplify Kconfig Mark Brown
2015-05-26  9:53   ` Mark Brown
2015-05-26  9:53   ` Mark Brown
2015-05-26 10:13 ` Nicolas Ferre
2015-05-26 10:13   ` Nicolas Ferre
2015-05-26 10:13   ` Nicolas Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1432591459-22613-1-git-send-email-alexandre.belloni@free-electrons.com \
    --to=alexandre.belloni@free-electrons.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=arnd@arndb.de \
    --cc=broonie@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nicolas.ferre@atmel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.