From: Roger Quadros <rogerq@ti.com> To: <stern@rowland.harvard.edu>, <balbi@ti.com>, <gregkh@linuxfoundation.org>, <peter.chen@freescale.com> Cc: <dan.j.williams@intel.com>, <jun.li@freescale.com>, <mathias.nyman@linux.intel.com>, <tony@atomide.com>, <Joao.Pinto@synopsys.com>, <abrestic@chromium.org>, <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>, Roger Quadros <rogerq@ti.com> Subject: [PATCH v4 05/13] usb: hcd.h: Add OTG to HCD interface Date: Mon, 24 Aug 2015 16:21:16 +0300 [thread overview] Message-ID: <1440422484-4737-6-git-send-email-rogerq@ti.com> (raw) In-Reply-To: <1440422484-4737-1-git-send-email-rogerq@ti.com> The OTG core will use struct otg_hcd_ops to add/remove the HCD controller. The main purpose of this interface is to avoid directly calling usb_add/remove_hcd() from the OTG core as they wouldn't be defined in the built-in symbol table if CONFIG_USB is m. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Peter Chen <peter.chen@freescale.com> --- include/linux/usb/hcd.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index d2784c1..27d78b1 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -386,6 +386,20 @@ struct hc_driver { }; +/** + * struct otg_hcd_ops - Interface between OTG core and HCD + * + * Provided by the HCD core to allow the OTG core to start/stop the HCD + * + * @add: function to add the HCD + * @remove: function to remove the HCD + */ +struct otg_hcd_ops { + int (*add)(struct usb_hcd *hcd, + unsigned int irqnum, unsigned long irqflags); + void (*remove)(struct usb_hcd *hcd); +}; + static inline int hcd_giveback_urb_in_bh(struct usb_hcd *hcd) { return hcd->driver->flags & HCD_BH; -- 2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@ti.com> To: stern@rowland.harvard.edu, balbi@ti.com, gregkh@linuxfoundation.org, peter.chen@freescale.com Cc: dan.j.williams@intel.com, jun.li@freescale.com, mathias.nyman@linux.intel.com, tony@atomide.com, Joao.Pinto@synopsys.com, abrestic@chromium.org, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, Roger Quadros <rogerq@ti.com> Subject: [PATCH v4 05/13] usb: hcd.h: Add OTG to HCD interface Date: Mon, 24 Aug 2015 16:21:16 +0300 [thread overview] Message-ID: <1440422484-4737-6-git-send-email-rogerq@ti.com> (raw) In-Reply-To: <1440422484-4737-1-git-send-email-rogerq@ti.com> The OTG core will use struct otg_hcd_ops to add/remove the HCD controller. The main purpose of this interface is to avoid directly calling usb_add/remove_hcd() from the OTG core as they wouldn't be defined in the built-in symbol table if CONFIG_USB is m. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Peter Chen <peter.chen@freescale.com> --- include/linux/usb/hcd.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index d2784c1..27d78b1 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -386,6 +386,20 @@ struct hc_driver { }; +/** + * struct otg_hcd_ops - Interface between OTG core and HCD + * + * Provided by the HCD core to allow the OTG core to start/stop the HCD + * + * @add: function to add the HCD + * @remove: function to remove the HCD + */ +struct otg_hcd_ops { + int (*add)(struct usb_hcd *hcd, + unsigned int irqnum, unsigned long irqflags); + void (*remove)(struct usb_hcd *hcd); +}; + static inline int hcd_giveback_urb_in_bh(struct usb_hcd *hcd) { return hcd->driver->flags & HCD_BH; -- 2.1.4
next prev parent reply other threads:[~2015-08-24 13:21 UTC|newest] Thread overview: 98+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-08-24 13:21 [PATCH v4 00/13] USB: OTG/DRD Core functionality Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 01/13] usb: otg-fsm: Add documentation for struct otg_fsm Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 02/13] usb: otg-fsm: support multiple instances Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-09-06 5:52 ` Peter Chen 2015-09-06 5:52 ` Peter Chen 2015-08-24 13:21 ` [PATCH v4 03/13] usb: otg-fsm: Prevent build warning "VDBG" redefined Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 04/13] otg-fsm: move usb_bus_start_enum into otg-fsm->ops Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-09-07 1:24 ` Peter Chen 2015-09-07 1:24 ` Peter Chen 2015-09-07 9:57 ` Roger Quadros 2015-09-07 9:57 ` Roger Quadros 2015-09-08 6:54 ` Peter Chen 2015-09-08 6:54 ` Peter Chen 2015-09-08 8:24 ` Roger Quadros 2015-09-08 8:24 ` Roger Quadros 2015-08-24 13:21 ` Roger Quadros [this message] 2015-08-24 13:21 ` [PATCH v4 05/13] usb: hcd.h: Add OTG to HCD interface Roger Quadros 2015-08-24 13:21 ` [PATCH v4 06/13] usb: gadget.h: Add OTG to gadget interface Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 07/13] usb: otg: add OTG core Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-09-07 1:23 ` Peter Chen 2015-09-07 1:23 ` Peter Chen 2015-09-07 10:23 ` Roger Quadros 2015-09-07 10:23 ` Roger Quadros 2015-09-08 8:31 ` Peter Chen 2015-09-08 8:31 ` Peter Chen 2015-09-08 12:25 ` Roger Quadros 2015-09-08 12:25 ` Roger Quadros 2015-09-08 14:34 ` Alan Stern 2015-09-08 14:34 ` Alan Stern 2015-09-08 17:29 ` Roger Quadros 2015-09-08 17:29 ` Roger Quadros 2015-09-09 2:21 ` Peter Chen 2015-09-09 2:21 ` Peter Chen 2015-09-09 9:08 ` Roger Quadros 2015-09-09 9:08 ` Roger Quadros 2015-09-09 8:13 ` Peter Chen 2015-09-09 8:13 ` Peter Chen 2015-09-09 9:33 ` Roger Quadros 2015-09-09 9:33 ` Roger Quadros 2015-09-09 8:45 ` Peter Chen 2015-09-09 8:45 ` Peter Chen 2015-09-09 10:21 ` Roger Quadros 2015-09-09 10:21 ` Roger Quadros 2015-09-10 5:35 ` Peter Chen 2015-09-10 5:35 ` Peter Chen 2015-09-10 14:17 ` Roger Quadros 2015-09-10 14:17 ` Roger Quadros 2015-09-11 1:50 ` Peter Chen 2015-09-11 1:50 ` Peter Chen 2015-09-07 7:40 ` Li Jun 2015-09-07 7:40 ` Li Jun 2015-09-07 10:53 ` Roger Quadros 2015-09-07 10:53 ` Roger Quadros 2015-09-09 6:20 ` Li Jun 2015-09-09 6:20 ` Li Jun 2015-09-09 10:01 ` Roger Quadros 2015-09-09 10:01 ` Roger Quadros 2015-09-10 9:28 ` Li Jun 2015-09-10 9:28 ` Li Jun 2015-09-10 14:14 ` Roger Quadros 2015-09-10 14:14 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 08/13] usb: doc: dt-binding: Add otg-controller property Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 09/13] usb: chipidea: move from CONFIG_USB_OTG_FSM to CONFIG_USB_OTG Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 10/13] usb: hcd: Adapt to OTG core Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-09-09 2:23 ` Peter Chen 2015-09-09 2:23 ` Peter Chen 2015-09-09 9:39 ` Roger Quadros 2015-09-09 9:39 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 11/13] usb: core: hub: Notify OTG fsm when A device sets b_hnp_enable Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 12/13] usb: gadget: udc: adapt to OTG core Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-08-24 13:21 ` [PATCH v4 13/13] usb: otg: Add dual-role device (DRD) support Roger Quadros 2015-08-24 13:21 ` Roger Quadros 2015-09-07 7:53 ` Li Jun 2015-09-07 7:53 ` Li Jun 2015-09-07 9:51 ` Roger Quadros 2015-09-07 9:51 ` Roger Quadros 2015-08-26 6:19 ` [PATCH v4 00/13] USB: OTG/DRD Core functionality Peter Chen 2015-08-26 6:19 ` Peter Chen 2015-09-06 7:06 ` Peter Chen 2015-09-06 7:06 ` Peter Chen 2015-09-07 11:42 ` Roger Quadros 2015-09-07 11:42 ` Roger Quadros 2015-12-03 8:19 ` Peter Chen 2015-12-03 8:19 ` Peter Chen 2015-12-03 8:54 ` Roger Quadros 2015-12-03 8:54 ` Roger Quadros
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1440422484-4737-6-git-send-email-rogerq@ti.com \ --to=rogerq@ti.com \ --cc=Joao.Pinto@synopsys.com \ --cc=abrestic@chromium.org \ --cc=balbi@ti.com \ --cc=dan.j.williams@intel.com \ --cc=gregkh@linuxfoundation.org \ --cc=jun.li@freescale.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=mathias.nyman@linux.intel.com \ --cc=peter.chen@freescale.com \ --cc=stern@rowland.harvard.edu \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.