From: Richard Zhu <hongxing.zhu@nxp.com> To: l.stach@pengutronix.de, bhelgaas@google.com, robh+dt@kernel.org, broonie@kernel.org, lorenzo.pieralisi@arm.com, festevam@gmail.com, francesco.dolcini@toradex.com Cc: hongxing.zhu@nxp.com, linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, kernel@pengutronix.de, linux-imx@nxp.com Subject: [PATCH v11 1/8] PCI: imx6: Encapsulate the clock enable into one standalone function Date: Tue, 14 Jun 2022 14:58:55 +0800 [thread overview] Message-ID: <1655189942-12678-2-git-send-email-hongxing.zhu@nxp.com> (raw) In-Reply-To: <1655189942-12678-1-git-send-email-hongxing.zhu@nxp.com> No function changes, just encapsulate the i.MX PCIe clock enable operations into one standalone function imx6_pcie_clk_enable(). Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> --- drivers/pci/controller/dwc/pci-imx6.c | 79 ++++++++++++++++----------- 1 file changed, 48 insertions(+), 31 deletions(-) diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 7a285fb0f619..8e53c6f771d2 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -482,38 +482,16 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie) return ret; } -static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie) -{ - u32 val; - struct device *dev = imx6_pcie->pci->dev; - - if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr, - IOMUXC_GPR22, val, - val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED, - PHY_PLL_LOCK_WAIT_USLEEP_MAX, - PHY_PLL_LOCK_WAIT_TIMEOUT)) - dev_err(dev, "PCIe PLL lock timeout\n"); -} - -static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) +static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie) { struct dw_pcie *pci = imx6_pcie->pci; struct device *dev = pci->dev; int ret; - if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) { - ret = regulator_enable(imx6_pcie->vpcie); - if (ret) { - dev_err(dev, "failed to enable vpcie regulator: %d\n", - ret); - return; - } - } - ret = clk_prepare_enable(imx6_pcie->pcie_phy); if (ret) { dev_err(dev, "unable to enable pcie_phy clock\n"); - goto err_pcie_phy; + return ret; } ret = clk_prepare_enable(imx6_pcie->pcie_bus); @@ -544,6 +522,51 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) } /* allow the clocks to stabilize */ usleep_range(200, 500); + return 0; + +err_ref_clk: + clk_disable_unprepare(imx6_pcie->pcie); +err_pcie: + clk_disable_unprepare(imx6_pcie->pcie_bus); +err_pcie_bus: + clk_disable_unprepare(imx6_pcie->pcie_phy); + + return ret; +} + +static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie) +{ + u32 val; + struct device *dev = imx6_pcie->pci->dev; + + if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr, + IOMUXC_GPR22, val, + val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED, + PHY_PLL_LOCK_WAIT_USLEEP_MAX, + PHY_PLL_LOCK_WAIT_TIMEOUT)) + dev_err(dev, "PCIe PLL lock timeout\n"); +} + +static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) +{ + struct dw_pcie *pci = imx6_pcie->pci; + struct device *dev = pci->dev; + int ret; + + if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) { + ret = regulator_enable(imx6_pcie->vpcie); + if (ret) { + dev_err(dev, "failed to enable vpcie regulator: %d\n", + ret); + return; + } + } + + ret = imx6_pcie_clk_enable(imx6_pcie); + if (ret) { + dev_err(dev, "unable to enable pcie clocks\n"); + goto err_clks; + } switch (imx6_pcie->drvdata->variant) { case IMX8MQ: @@ -602,13 +625,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) return; -err_ref_clk: - clk_disable_unprepare(imx6_pcie->pcie); -err_pcie: - clk_disable_unprepare(imx6_pcie->pcie_bus); -err_pcie_bus: - clk_disable_unprepare(imx6_pcie->pcie_phy); -err_pcie_phy: +err_clks: if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) { ret = regulator_disable(imx6_pcie->vpcie); if (ret) -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Richard Zhu <hongxing.zhu@nxp.com> To: l.stach@pengutronix.de, bhelgaas@google.com, robh+dt@kernel.org, broonie@kernel.org, lorenzo.pieralisi@arm.com, festevam@gmail.com, francesco.dolcini@toradex.com Cc: hongxing.zhu@nxp.com, linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, kernel@pengutronix.de, linux-imx@nxp.com Subject: [PATCH v11 1/8] PCI: imx6: Encapsulate the clock enable into one standalone function Date: Tue, 14 Jun 2022 14:58:55 +0800 [thread overview] Message-ID: <1655189942-12678-2-git-send-email-hongxing.zhu@nxp.com> (raw) In-Reply-To: <1655189942-12678-1-git-send-email-hongxing.zhu@nxp.com> No function changes, just encapsulate the i.MX PCIe clock enable operations into one standalone function imx6_pcie_clk_enable(). Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> --- drivers/pci/controller/dwc/pci-imx6.c | 79 ++++++++++++++++----------- 1 file changed, 48 insertions(+), 31 deletions(-) diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 7a285fb0f619..8e53c6f771d2 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -482,38 +482,16 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie) return ret; } -static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie) -{ - u32 val; - struct device *dev = imx6_pcie->pci->dev; - - if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr, - IOMUXC_GPR22, val, - val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED, - PHY_PLL_LOCK_WAIT_USLEEP_MAX, - PHY_PLL_LOCK_WAIT_TIMEOUT)) - dev_err(dev, "PCIe PLL lock timeout\n"); -} - -static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) +static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie) { struct dw_pcie *pci = imx6_pcie->pci; struct device *dev = pci->dev; int ret; - if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) { - ret = regulator_enable(imx6_pcie->vpcie); - if (ret) { - dev_err(dev, "failed to enable vpcie regulator: %d\n", - ret); - return; - } - } - ret = clk_prepare_enable(imx6_pcie->pcie_phy); if (ret) { dev_err(dev, "unable to enable pcie_phy clock\n"); - goto err_pcie_phy; + return ret; } ret = clk_prepare_enable(imx6_pcie->pcie_bus); @@ -544,6 +522,51 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) } /* allow the clocks to stabilize */ usleep_range(200, 500); + return 0; + +err_ref_clk: + clk_disable_unprepare(imx6_pcie->pcie); +err_pcie: + clk_disable_unprepare(imx6_pcie->pcie_bus); +err_pcie_bus: + clk_disable_unprepare(imx6_pcie->pcie_phy); + + return ret; +} + +static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie) +{ + u32 val; + struct device *dev = imx6_pcie->pci->dev; + + if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr, + IOMUXC_GPR22, val, + val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED, + PHY_PLL_LOCK_WAIT_USLEEP_MAX, + PHY_PLL_LOCK_WAIT_TIMEOUT)) + dev_err(dev, "PCIe PLL lock timeout\n"); +} + +static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) +{ + struct dw_pcie *pci = imx6_pcie->pci; + struct device *dev = pci->dev; + int ret; + + if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) { + ret = regulator_enable(imx6_pcie->vpcie); + if (ret) { + dev_err(dev, "failed to enable vpcie regulator: %d\n", + ret); + return; + } + } + + ret = imx6_pcie_clk_enable(imx6_pcie); + if (ret) { + dev_err(dev, "unable to enable pcie clocks\n"); + goto err_clks; + } switch (imx6_pcie->drvdata->variant) { case IMX8MQ: @@ -602,13 +625,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) return; -err_ref_clk: - clk_disable_unprepare(imx6_pcie->pcie); -err_pcie: - clk_disable_unprepare(imx6_pcie->pcie_bus); -err_pcie_bus: - clk_disable_unprepare(imx6_pcie->pcie_phy); -err_pcie_phy: +err_clks: if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) { ret = regulator_disable(imx6_pcie->vpcie); if (ret) -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-06-14 7:13 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-06-14 6:58 [PATCH v11 0/8] PCI: imx6: refine codes and add the error propagation Richard Zhu 2022-06-14 6:58 ` Richard Zhu 2022-06-14 6:58 ` Richard Zhu [this message] 2022-06-14 6:58 ` [PATCH v11 1/8] PCI: imx6: Encapsulate the clock enable into one standalone function Richard Zhu 2022-06-14 6:58 ` [PATCH v11 2/8] PCI: imx6: Add the error propagation from host_init Richard Zhu 2022-06-14 6:58 ` Richard Zhu 2022-06-14 6:58 ` [PATCH v11 3/8] PCI: imx6: Move imx6_pcie_clk_disable() earlier Richard Zhu 2022-06-14 6:58 ` Richard Zhu 2022-06-14 6:58 ` [PATCH v11 4/8] PCI: imx6: Disable iMX6QDL PCIe REF clock when disable PCIe clocks Richard Zhu 2022-06-14 6:58 ` Richard Zhu 2022-06-14 6:58 ` [PATCH v11 5/8] PCI: imx6: Turn off regulator when the system is in suspend mode Richard Zhu 2022-06-14 6:58 ` Richard Zhu 2022-06-14 6:59 ` [PATCH v11 6/8] PCI: imx6: Mark the link down as none fatal error Richard Zhu 2022-06-14 6:59 ` Richard Zhu 2022-06-14 6:59 ` [PATCH v11 7/8] PCI: imx6: Reduce resume time by only starting link if it was up before suspend Richard Zhu 2022-06-14 6:59 ` Richard Zhu 2022-06-14 6:59 ` [PATCH v11 8/8] PCI: imx6: Do not hide phy driver callbacks and refine the error handling Richard Zhu 2022-06-14 6:59 ` Richard Zhu 2022-06-15 23:01 ` [PATCH v11 0/8] PCI: imx6: refine codes and add the error propagation Bjorn Helgaas 2022-06-15 23:01 ` Bjorn Helgaas
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1655189942-12678-2-git-send-email-hongxing.zhu@nxp.com \ --to=hongxing.zhu@nxp.com \ --cc=bhelgaas@google.com \ --cc=broonie@kernel.org \ --cc=festevam@gmail.com \ --cc=francesco.dolcini@toradex.com \ --cc=kernel@pengutronix.de \ --cc=l.stach@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pci@vger.kernel.org \ --cc=lorenzo.pieralisi@arm.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.