From: Ray Jui <ray.jui@broadcom.com> To: Wolfram Sang <wsa@the-dreams.de>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com, Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>, Ray Jui <ray.jui@broadcom.com> Subject: [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm,iproc-nic-i2c" compatible string Date: Thu, 14 Feb 2019 09:57:23 -0800 [thread overview] Message-ID: <20190214175725.60462-7-ray.jui@broadcom.com> (raw) In-Reply-To: <20190214175725.60462-1-ray.jui@broadcom.com> From: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Update iProc I2C binding document to add new compatible string "brcm,iproc-nic-i2c". Optional property "brcm,ape-hsls-addr-mask" is also added that allows configuration of the host view into the APE's address for "brcm,iproc-nic-i2c" Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> --- Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt index 7a32bf81bfa9..d12cc33cca6c 100644 --- a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt @@ -3,7 +3,7 @@ Broadcom iProc I2C controller Required properties: - compatible: - Must be "brcm,iproc-i2c" + Must be "brcm,iproc-i2c" or "brcm,iproc-nic-i2c" - reg: Define the base and range of the I/O address space that contain the iProc @@ -26,6 +26,10 @@ Optional properties: case, this property should be left unspecified, and driver will fall back to polling mode +- brcm,ape-hsls-addr-mask: + Required for "brcm,iproc-nic-i2c". Host view of address mask into the + 'APE' co-processor. Value must be unsigned, 32-bit + Example: i2c0: i2c@18008000 { compatible = "brcm,iproc-i2c"; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Ray Jui <ray.jui@broadcom.com> To: Wolfram Sang <wsa@the-dreams.de>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org, Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>, linux-kernel@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com, linux-i2c@vger.kernel.org, Ray Jui <ray.jui@broadcom.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm, iproc-nic-i2c" compatible string Date: Thu, 14 Feb 2019 09:57:23 -0800 [thread overview] Message-ID: <20190214175725.60462-7-ray.jui@broadcom.com> (raw) In-Reply-To: <20190214175725.60462-1-ray.jui@broadcom.com> From: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Update iProc I2C binding document to add new compatible string "brcm,iproc-nic-i2c". Optional property "brcm,ape-hsls-addr-mask" is also added that allows configuration of the host view into the APE's address for "brcm,iproc-nic-i2c" Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> --- Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt index 7a32bf81bfa9..d12cc33cca6c 100644 --- a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt @@ -3,7 +3,7 @@ Broadcom iProc I2C controller Required properties: - compatible: - Must be "brcm,iproc-i2c" + Must be "brcm,iproc-i2c" or "brcm,iproc-nic-i2c" - reg: Define the base and range of the I/O address space that contain the iProc @@ -26,6 +26,10 @@ Optional properties: case, this property should be left unspecified, and driver will fall back to polling mode +- brcm,ape-hsls-addr-mask: + Required for "brcm,iproc-nic-i2c". Host view of address mask into the + 'APE' co-processor. Value must be unsigned, 32-bit + Example: i2c0: i2c@18008000 { compatible = "brcm,iproc-i2c"; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-02-14 17:58 UTC|newest] Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-02-14 17:57 [PATCH v5 0/8] iProc I2C slave mode and NIC mode Ray Jui 2019-02-14 17:57 ` Ray Jui 2019-02-14 17:57 ` [PATCH v5 1/8] i2c: iproc: Extend I2C read up to 255 bytes Ray Jui 2019-02-14 17:57 ` Ray Jui 2019-03-27 22:17 ` Wolfram Sang 2019-03-27 22:17 ` Wolfram Sang 2019-04-01 21:35 ` Ray Jui 2019-04-01 21:35 ` Ray Jui 2019-02-14 17:57 ` [PATCH v5 2/8] i2c: iproc: Add slave mode support Ray Jui 2019-02-14 17:57 ` Ray Jui 2019-03-27 22:14 ` Wolfram Sang 2019-03-27 22:14 ` Wolfram Sang 2019-03-27 22:41 ` Wolfram Sang 2019-03-27 22:41 ` Wolfram Sang 2019-04-01 21:33 ` Ray Jui 2019-04-01 21:33 ` Ray Jui 2019-04-02 8:24 ` Rayagonda Kokatanur 2019-04-02 8:24 ` Rayagonda Kokatanur 2019-04-02 9:01 ` Wolfram Sang 2019-04-02 9:01 ` Wolfram Sang 2019-02-14 17:57 ` [PATCH v5 3/8] dt-bindings: i2c: iproc: make 'interrupts' optional Ray Jui 2019-02-14 17:57 ` Ray Jui 2019-02-14 22:25 ` Rob Herring 2019-02-14 22:25 ` Rob Herring 2019-02-14 22:25 ` Rob Herring 2019-02-14 17:57 ` [PATCH v5 4/8] i2c: iproc: add polling support Ray Jui 2019-02-14 17:57 ` Ray Jui 2019-02-14 17:57 ` [PATCH v5 5/8] i2c: iproc: use wrapper for read/write access Ray Jui 2019-02-14 17:57 ` Ray Jui 2019-02-14 17:57 ` Ray Jui [this message] 2019-02-14 17:57 ` [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm, iproc-nic-i2c" compatible string Ray Jui 2019-02-14 22:26 ` [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm,iproc-nic-i2c" " Rob Herring 2019-02-14 22:26 ` [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm, iproc-nic-i2c" " Rob Herring 2019-02-14 22:26 ` Rob Herring 2019-03-27 22:24 ` [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm,iproc-nic-i2c" " Wolfram Sang 2019-03-27 22:24 ` [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm, iproc-nic-i2c" " Wolfram Sang 2019-04-01 21:43 ` [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm,iproc-nic-i2c" " Ray Jui 2019-04-01 21:43 ` [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm, iproc-nic-i2c" " Ray Jui 2019-04-02 10:17 ` [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm,iproc-nic-i2c" " Wolfram Sang 2019-04-02 10:17 ` [PATCH v5 6/8] dt-bindings: i2c: iproc: add "brcm, iproc-nic-i2c" " Wolfram Sang 2019-02-14 17:57 ` [PATCH v5 7/8] i2c: iproc: add NIC I2C support Ray Jui 2019-02-14 17:57 ` Ray Jui 2019-04-02 10:27 ` Wolfram Sang 2019-04-02 10:27 ` Wolfram Sang 2019-04-02 17:57 ` Ray Jui 2019-04-02 17:57 ` Ray Jui 2019-04-03 1:10 ` Ray Jui 2019-04-03 1:10 ` Ray Jui 2019-02-14 17:57 ` [PATCH v5 8/8] arm64: dts: Stingray: Add NIC i2c device node Ray Jui 2019-02-14 17:57 ` Ray Jui 2019-02-22 20:04 ` [PATCH v5 0/8] iProc I2C slave mode and NIC mode Ray Jui 2019-02-22 20:04 ` Ray Jui 2019-03-22 16:40 ` Florian Fainelli 2019-03-22 16:40 ` Florian Fainelli 2019-03-27 22:27 ` Wolfram Sang 2019-03-27 22:27 ` Wolfram Sang 2019-04-01 21:44 ` Ray Jui 2019-04-01 21:44 ` Ray Jui
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190214175725.60462-7-ray.jui@broadcom.com \ --to=ray.jui@broadcom.com \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-i2c@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=rayagonda.kokatanur@broadcom.com \ --cc=robh+dt@kernel.org \ --cc=wsa@the-dreams.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.