From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
To: Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Philipp Tomsich
<philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org>,
Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
Akash Gajjar <akash-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
Cc: Paul Kocialkowski
<paul.kocialkowski-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org,
Jagan Teki
<jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>,
u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org
Subject: [PATCH v7 06/11] rockchip: rk3399: Add Nanopi M4 board support
Date: Wed, 8 May 2019 00:06:22 +0530 [thread overview]
Message-ID: <20190507183625.5983-7-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190507183625.5983-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Add initial support for Nanopi M4 board.
Specification
- Rockchip RK3399
- Dual-Channel 4GB LPDDR3-1866
- SD card slot
- eMMC socket
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI
- USB 3.0 x4
- USB Type C power and data
- GPIO1, GPIO2 expansion ports
- DC5V/3A
Commit details of rk3399-nanopi-m4.dts sync from Linux 5.1-rc2:
"arm64: dts: rockchip: Refine nanopi4 differences"
(sha1: c62ffaf5026d0b7633e62b2cea8450b5543c349a)
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Reviewed-by: Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi | 7 +++
arch/arm/dts/rk3399-nanopi-m4.dts | 66 +++++++++++++++++++++++
arch/arm/dts/rk3399-nanopi4-u-boot.dtsi | 2 +
board/rockchip/evb_rk3399/MAINTAINERS | 6 +++
configs/nanopi-m4-rk3399_defconfig | 59 ++++++++++++++++++++
6 files changed, 141 insertions(+)
create mode 100644 arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-nanopi-m4.dts
create mode 100644 configs/nanopi-m4-rk3399_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 35cbbfabd0..2a5bfd3fb5 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -106,6 +106,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
rk3399-ficus.dtb \
rk3399-firefly.dtb \
rk3399-gru-bob.dtb \
+ rk3399-nanopi-m4.dtb \
rk3399-orangepi.dtb \
rk3399-puma-ddr1333.dtb \
rk3399-puma-ddr1600.dtb \
diff --git a/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
new file mode 100644
index 0000000000..17201bcf41
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
+ */
+
+#include "rk3399-nanopi4-u-boot.dtsi"
+#include "rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi"
diff --git a/arch/arm/dts/rk3399-nanopi-m4.dts b/arch/arm/dts/rk3399-nanopi-m4.dts
new file mode 100644
index 0000000000..60358ab8c7
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-m4.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPi M4 board device tree source
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+ model = "FriendlyElec NanoPi M4";
+ compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399";
+
+ vdd_5v: vdd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc5v0_core: vcc5v0-core {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_core";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_5v>;
+ };
+
+ vcc5v0_usb1: vcc5v0-usb1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb1";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_usb2: vcc5v0-usb2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb2";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&vcc3v3_sys {
+ vin-supply = <&vcc5v0_core>;
+};
+
+&u2phy0_host {
+ phy-supply = <&vcc5v0_usb1>;
+};
+
+&u2phy1_host {
+ phy-supply = <&vcc5v0_usb2>;
+};
+
+&vbus_typec {
+ regulator-always-on;
+ vin-supply = <&vdd_5v>;
+};
diff --git a/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
index 20db99c0b8..05708b6f55 100644
--- a/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
@@ -3,6 +3,8 @@
* Copyright (C) 2019 Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
*/
+#include "rk3399-u-boot.dtsi"
+
&sdmmc {
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_cd>;
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
index 07ee8ce92c..ae43805a6a 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -6,6 +6,12 @@ F: include/configs/evb_rk3399.h
F: configs/evb-rk3399_defconfig
F: configs/firefly-rk3399_defconfig
+NANOPI-M4
+M: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
+S: Maintained
+F: configs/nanopi-m4-rk3399_defconfig
+F: arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
+
ORANGEPI-RK3399
M: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
S: Maintained
diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
new file mode 100644
index 0000000000..c2832788f0
--- /dev/null
+++ b/configs/nanopi-m4-rk3399_defconfig
@@ -0,0 +1,59 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff8c2000
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-m4"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_ERRNO_STR=y
--
2.18.0.321.gffc6fa0e3
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v7 06/11] rockchip: rk3399: Add Nanopi M4 board support
Date: Wed, 8 May 2019 00:06:22 +0530 [thread overview]
Message-ID: <20190507183625.5983-7-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190507183625.5983-1-jagan@amarulasolutions.com>
Add initial support for Nanopi M4 board.
Specification
- Rockchip RK3399
- Dual-Channel 4GB LPDDR3-1866
- SD card slot
- eMMC socket
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI
- USB 3.0 x4
- USB Type C power and data
- GPIO1, GPIO2 expansion ports
- DC5V/3A
Commit details of rk3399-nanopi-m4.dts sync from Linux 5.1-rc2:
"arm64: dts: rockchip: Refine nanopi4 differences"
(sha1: c62ffaf5026d0b7633e62b2cea8450b5543c349a)
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi | 7 +++
arch/arm/dts/rk3399-nanopi-m4.dts | 66 +++++++++++++++++++++++
arch/arm/dts/rk3399-nanopi4-u-boot.dtsi | 2 +
board/rockchip/evb_rk3399/MAINTAINERS | 6 +++
configs/nanopi-m4-rk3399_defconfig | 59 ++++++++++++++++++++
6 files changed, 141 insertions(+)
create mode 100644 arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3399-nanopi-m4.dts
create mode 100644 configs/nanopi-m4-rk3399_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 35cbbfabd0..2a5bfd3fb5 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -106,6 +106,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
rk3399-ficus.dtb \
rk3399-firefly.dtb \
rk3399-gru-bob.dtb \
+ rk3399-nanopi-m4.dtb \
rk3399-orangepi.dtb \
rk3399-puma-ddr1333.dtb \
rk3399-puma-ddr1600.dtb \
diff --git a/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
new file mode 100644
index 0000000000..17201bcf41
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-nanopi4-u-boot.dtsi"
+#include "rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi"
diff --git a/arch/arm/dts/rk3399-nanopi-m4.dts b/arch/arm/dts/rk3399-nanopi-m4.dts
new file mode 100644
index 0000000000..60358ab8c7
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-m4.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPi M4 board device tree source
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+ model = "FriendlyElec NanoPi M4";
+ compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399";
+
+ vdd_5v: vdd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc5v0_core: vcc5v0-core {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_core";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_5v>;
+ };
+
+ vcc5v0_usb1: vcc5v0-usb1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb1";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_usb2: vcc5v0-usb2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb2";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&vcc3v3_sys {
+ vin-supply = <&vcc5v0_core>;
+};
+
+&u2phy0_host {
+ phy-supply = <&vcc5v0_usb1>;
+};
+
+&u2phy1_host {
+ phy-supply = <&vcc5v0_usb2>;
+};
+
+&vbus_typec {
+ regulator-always-on;
+ vin-supply = <&vdd_5v>;
+};
diff --git a/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
index 20db99c0b8..05708b6f55 100644
--- a/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
@@ -3,6 +3,8 @@
* Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
*/
+#include "rk3399-u-boot.dtsi"
+
&sdmmc {
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_cd>;
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
index 07ee8ce92c..ae43805a6a 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -6,6 +6,12 @@ F: include/configs/evb_rk3399.h
F: configs/evb-rk3399_defconfig
F: configs/firefly-rk3399_defconfig
+NANOPI-M4
+M: Jagan Teki <jagan@amarulasolutions.com>
+S: Maintained
+F: configs/nanopi-m4-rk3399_defconfig
+F: arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
+
ORANGEPI-RK3399
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
new file mode 100644
index 0000000000..c2832788f0
--- /dev/null
+++ b/configs/nanopi-m4-rk3399_defconfig
@@ -0,0 +1,59 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff8c2000
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-m4"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_ERRNO_STR=y
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2019-05-07 18:36 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-07 18:36 [PATCH v7 00/11] rockchip: Add new rk3399 boards Jagan Teki
2019-05-07 18:36 ` [U-Boot] " Jagan Teki
[not found] ` <20190507183625.5983-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-07 18:36 ` [PATCH v7 01/11] rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2 Jagan Teki
2019-05-07 18:36 ` [U-Boot] " Jagan Teki
[not found] ` <20190507183625.5983-2-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08 3:46 ` Kever Yang
2019-05-08 3:46 ` [U-Boot] " Kever Yang
2019-05-07 18:36 ` [PATCH v7 02/11] Kconfig: Add default SPL_FIT_GENERATOR for rockchip Jagan Teki
2019-05-07 18:36 ` [U-Boot] " Jagan Teki
[not found] ` <20190507183625.5983-3-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08 3:46 ` Kever Yang
2019-05-08 3:46 ` [U-Boot] " Kever Yang
2019-05-07 18:36 ` [PATCH v7 03/11] arm: rockchip: rk3399: Move common configs in Kconfig Jagan Teki
2019-05-07 18:36 ` [U-Boot] " Jagan Teki
[not found] ` <20190507183625.5983-4-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08 3:47 ` Kever Yang
2019-05-08 3:47 ` [U-Boot] " Kever Yang
2019-05-07 18:36 ` [PATCH v7 04/11] rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux Jagan Teki
2019-05-07 18:36 ` [U-Boot] " Jagan Teki
[not found] ` <20190507183625.5983-5-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08 3:47 ` Kever Yang
2019-05-08 3:47 ` [U-Boot] " Kever Yang
2019-05-07 18:36 ` [PATCH v7 05/11] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1 Jagan Teki
2019-05-07 18:36 ` [U-Boot] " Jagan Teki
[not found] ` <20190507183625.5983-6-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08 3:47 ` Kever Yang
2019-05-08 3:47 ` [U-Boot] " Kever Yang
2019-05-07 18:36 ` Jagan Teki [this message]
2019-05-07 18:36 ` [U-Boot] [PATCH v7 06/11] rockchip: rk3399: Add Nanopi M4 board support Jagan Teki
2019-05-07 18:36 ` [PATCH v7 07/11] rockchip: rk3399: Add Nanopc T4 " Jagan Teki
2019-05-07 18:36 ` [U-Boot] " Jagan Teki
[not found] ` <20190507183625.5983-8-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08 3:48 ` Kever Yang
2019-05-08 3:48 ` [U-Boot] " Kever Yang
2019-05-07 18:36 ` [PATCH v7 08/11] rockchip: rk3399: Add Nanopi NEO4 " Jagan Teki
2019-05-07 18:36 ` [U-Boot] " Jagan Teki
[not found] ` <20190507183625.5983-9-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08 3:48 ` Kever Yang
2019-05-08 3:48 ` [U-Boot] " Kever Yang
2019-05-07 18:36 ` [PATCH v7 09/11] rockchip: rk3399: Add Rockpro64 " Jagan Teki
2019-05-07 18:36 ` [U-Boot] " Jagan Teki
[not found] ` <20190507183625.5983-10-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-08 3:48 ` Kever Yang
2019-05-08 3:48 ` [U-Boot] " Kever Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190507183625.5983-7-jagan@amarulasolutions.com \
--to=jagan-dyjbcgdgk7pe9whmmfpqlfatqe2ktcn/@public.gmane.org \
--cc=akash-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org \
--cc=kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=paul.kocialkowski-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org \
--cc=philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org \
--cc=sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.