All of lore.kernel.org
 help / color / mirror / Atom feed
From: Keerthy <j-keerthy@ti.com>
To: <herbert@gondor.apana.org.au>, <davem@davemloft.net>,
	<robh+dt@kernel.org>
Cc: <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <t-kristo@ti.com>,
	<j-keerthy@ti.com>, <nm@ti.com>
Subject: [PATCH 10/10] arm64: dts: k3-am6: Add crypto accelarator node
Date: Tue, 18 Jun 2019 17:38:43 +0530	[thread overview]
Message-ID: <20190618120843.18777-11-j-keerthy@ti.com> (raw)
In-Reply-To: <20190618120843.18777-1-j-keerthy@ti.com>

Add crypto accelarator node. Define the psil specific config
node as well. This can be used in Packet Mode alone.

Signed-off-by: Keerthy <j-keerthy@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 33 ++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 91ca5bfeefc2..5e4f9ec39f01 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -91,6 +91,39 @@
 		power-domains = <&k3_pds 148>;
 	};
 
+	crypto: crypto@4E00000 {
+		compatible = "ti,sa2ul-crypto";
+		label = "crypto-aes-gbe";
+		reg = <0x0 0x4E00000 0x0 0x1200>;
+
+		status = "okay";
+		ti,psil-base = <0x4000>;
+
+		/* tx: crypto_pnp-1, rx: crypto_pnp-1 */
+		dmas = <&main_udmap &crypto 0 UDMA_DIR_TX>,
+				<&main_udmap &crypto 0 UDMA_DIR_RX>,
+				<&main_udmap &crypto 1 UDMA_DIR_RX>;
+		dma-names = "tx", "rx1", "rx2";
+
+		ti,psil-config0 {
+			linux,udma-mode = <UDMA_PKT_MODE>;
+			ti,needs-epib;
+			ti,psd-size = <64>;
+		};
+
+		ti,psil-config1 {
+			linux,udma-mode = <UDMA_PKT_MODE>;
+			ti,needs-epib;
+			ti,psd-size = <64>;
+		};
+
+		ti,psil-config2 {
+			linux,udma-mode = <UDMA_PKT_MODE>;
+			ti,needs-epib;
+			ti,psd-size = <64>;
+		};
+	};
+
 	main_pmx0: pinmux@11c000 {
 		compatible = "pinctrl-single";
 		reg = <0x0 0x11c000 0x0 0x2e4>;
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Keerthy <j-keerthy@ti.com>
To: herbert@gondor.apana.org.au, davem@davemloft.net, robh+dt@kernel.org
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	t-kristo@ti.com, j-keerthy@ti.com, nm@ti.com
Subject: [PATCH 10/10] arm64: dts: k3-am6: Add crypto accelarator node
Date: Tue, 18 Jun 2019 17:38:43 +0530	[thread overview]
Message-ID: <20190618120843.18777-11-j-keerthy@ti.com> (raw)
In-Reply-To: <20190618120843.18777-1-j-keerthy@ti.com>

Add crypto accelarator node. Define the psil specific config
node as well. This can be used in Packet Mode alone.

Signed-off-by: Keerthy <j-keerthy@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 33 ++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 91ca5bfeefc2..5e4f9ec39f01 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -91,6 +91,39 @@
 		power-domains = <&k3_pds 148>;
 	};
 
+	crypto: crypto@4E00000 {
+		compatible = "ti,sa2ul-crypto";
+		label = "crypto-aes-gbe";
+		reg = <0x0 0x4E00000 0x0 0x1200>;
+
+		status = "okay";
+		ti,psil-base = <0x4000>;
+
+		/* tx: crypto_pnp-1, rx: crypto_pnp-1 */
+		dmas = <&main_udmap &crypto 0 UDMA_DIR_TX>,
+				<&main_udmap &crypto 0 UDMA_DIR_RX>,
+				<&main_udmap &crypto 1 UDMA_DIR_RX>;
+		dma-names = "tx", "rx1", "rx2";
+
+		ti,psil-config0 {
+			linux,udma-mode = <UDMA_PKT_MODE>;
+			ti,needs-epib;
+			ti,psd-size = <64>;
+		};
+
+		ti,psil-config1 {
+			linux,udma-mode = <UDMA_PKT_MODE>;
+			ti,needs-epib;
+			ti,psd-size = <64>;
+		};
+
+		ti,psil-config2 {
+			linux,udma-mode = <UDMA_PKT_MODE>;
+			ti,needs-epib;
+			ti,psd-size = <64>;
+		};
+	};
+
 	main_pmx0: pinmux@11c000 {
 		compatible = "pinctrl-single";
 		reg = <0x0 0x11c000 0x0 0x2e4>;
-- 
2.17.1

WARNING: multiple messages have this Message-ID (diff)
From: Keerthy <j-keerthy@ti.com>
To: <herbert@gondor.apana.org.au>, <davem@davemloft.net>,
	<robh+dt@kernel.org>
Cc: nm@ti.com, devicetree@vger.kernel.org, j-keerthy@ti.com,
	linux-kernel@vger.kernel.org, t-kristo@ti.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 10/10] arm64: dts: k3-am6: Add crypto accelarator node
Date: Tue, 18 Jun 2019 17:38:43 +0530	[thread overview]
Message-ID: <20190618120843.18777-11-j-keerthy@ti.com> (raw)
In-Reply-To: <20190618120843.18777-1-j-keerthy@ti.com>

Add crypto accelarator node. Define the psil specific config
node as well. This can be used in Packet Mode alone.

Signed-off-by: Keerthy <j-keerthy@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 33 ++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 91ca5bfeefc2..5e4f9ec39f01 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -91,6 +91,39 @@
 		power-domains = <&k3_pds 148>;
 	};
 
+	crypto: crypto@4E00000 {
+		compatible = "ti,sa2ul-crypto";
+		label = "crypto-aes-gbe";
+		reg = <0x0 0x4E00000 0x0 0x1200>;
+
+		status = "okay";
+		ti,psil-base = <0x4000>;
+
+		/* tx: crypto_pnp-1, rx: crypto_pnp-1 */
+		dmas = <&main_udmap &crypto 0 UDMA_DIR_TX>,
+				<&main_udmap &crypto 0 UDMA_DIR_RX>,
+				<&main_udmap &crypto 1 UDMA_DIR_RX>;
+		dma-names = "tx", "rx1", "rx2";
+
+		ti,psil-config0 {
+			linux,udma-mode = <UDMA_PKT_MODE>;
+			ti,needs-epib;
+			ti,psd-size = <64>;
+		};
+
+		ti,psil-config1 {
+			linux,udma-mode = <UDMA_PKT_MODE>;
+			ti,needs-epib;
+			ti,psd-size = <64>;
+		};
+
+		ti,psil-config2 {
+			linux,udma-mode = <UDMA_PKT_MODE>;
+			ti,needs-epib;
+			ti,psd-size = <64>;
+		};
+	};
+
 	main_pmx0: pinmux@11c000 {
 		compatible = "pinctrl-single";
 		reg = <0x0 0x11c000 0x0 0x2e4>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-06-18 12:09 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-18 12:08 [PATCH 00/10] crypto: k3: Add sa2ul driver Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` Keerthy
2019-06-18 12:08 ` [PATCH 01/10] dt-bindings: crypto: k3: Add sa2ul bindings documentation Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08 ` [PATCH 02/10] crypto: sa2ul: Add crypto driver Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08 ` [PATCH 03/10] crypto: sa2ul: Add AES ECB Mode support Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08 ` [PATCH 04/10] crypto: sa2ul: Add aead support for hmac(sha1)cbc(aes) algorithm Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08 ` [PATCH 05/10] crypto: sha256_generic: Export the Transform function Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08 ` [PATCH 06/10] crypto: sa2ul: Add hmac(sha256)cbc(aes) AEAD Algo support Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08 ` [PATCH 07/10] crypto: sa2ul: Add hmac(sha1) HMAC algorithm support Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08 ` [PATCH 08/10] crypto: sa2ul: Add hmac(sha256) " Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08 ` [PATCH 09/10] sa2ul: Add 3DES ECB & CBC Mode support Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-18 12:08 ` Keerthy [this message]
2019-06-18 12:08   ` [PATCH 10/10] arm64: dts: k3-am6: Add crypto accelarator node Keerthy
2019-06-18 12:08   ` Keerthy
2019-06-28  4:19 ` [PATCH 00/10] crypto: k3: Add sa2ul driver Herbert Xu
2019-06-28  4:19   ` Herbert Xu
2019-06-28  4:21   ` Keerthy
2019-06-28  4:21     ` Keerthy
2019-06-28  4:21     ` Keerthy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190618120843.18777-11-j-keerthy@ti.com \
    --to=j-keerthy@ti.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=herbert@gondor.apana.org.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=t-kristo@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.