All of lore.kernel.org
 help / color / mirror / Atom feed
From: Benoit Parrot <bparrot@ti.com>
To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>
Cc: <linux-omap@vger.kernel.org>, <linux-clk@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Benoit Parrot <bparrot@ti.com>
Subject: [Patch v3 05/10] ARM: dts: DRA72: Add CAL dtsi node
Date: Tue, 12 Nov 2019 08:27:48 -0600	[thread overview]
Message-ID: <20191112142753.22976-6-bparrot@ti.com> (raw)
In-Reply-To: <20191112142753.22976-1-bparrot@ti.com>

This patch adds the required dtsi node to support the Camera
Adaptation Layer (CAL) for the DRA72 family of devices.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 arch/arm/boot/dts/dra72x.dtsi | 43 +++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index f5762709c853..726e46ae887d 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -17,6 +17,49 @@
 	};
 };
 
+&l4_per2 {
+	target-module@5b000 {			/* 0x4845b000, ap 59 46.0 */
+		compatible = "ti,sysc-omap4", "ti,sysc";
+		reg = <0x5b000 0x4>,
+		      <0x5b010 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x5b000 0x1000>;
+
+		cal: cal@0 {
+			compatible = "ti,dra72-cal";
+			reg = <0x0000 0x400>,
+			      <0x0800 0x40>,
+			      <0x0900 0x40>;
+			reg-names = "cal_top",
+				    "cal_rx_core0",
+				    "cal_rx_core1";
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			ti,camerrx-control = <&scm_conf 0xE94>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi2_0: port@0 {
+					reg = <0>;
+				};
+				csi2_1: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
+
 &dss {
 	reg = <0x58000000 0x80>,
 	      <0x58004054 0x4>,
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Benoit Parrot <bparrot@ti.com>
To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>
Cc: linux-omap@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, Benoit Parrot <bparrot@ti.com>
Subject: [Patch v3 05/10] ARM: dts: DRA72: Add CAL dtsi node
Date: Tue, 12 Nov 2019 08:27:48 -0600	[thread overview]
Message-ID: <20191112142753.22976-6-bparrot@ti.com> (raw)
In-Reply-To: <20191112142753.22976-1-bparrot@ti.com>

This patch adds the required dtsi node to support the Camera
Adaptation Layer (CAL) for the DRA72 family of devices.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 arch/arm/boot/dts/dra72x.dtsi | 43 +++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index f5762709c853..726e46ae887d 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -17,6 +17,49 @@
 	};
 };
 
+&l4_per2 {
+	target-module@5b000 {			/* 0x4845b000, ap 59 46.0 */
+		compatible = "ti,sysc-omap4", "ti,sysc";
+		reg = <0x5b000 0x4>,
+		      <0x5b010 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x5b000 0x1000>;
+
+		cal: cal@0 {
+			compatible = "ti,dra72-cal";
+			reg = <0x0000 0x400>,
+			      <0x0800 0x40>,
+			      <0x0900 0x40>;
+			reg-names = "cal_top",
+				    "cal_rx_core0",
+				    "cal_rx_core1";
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			ti,camerrx-control = <&scm_conf 0xE94>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi2_0: port@0 {
+					reg = <0>;
+				};
+				csi2_1: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
+
 &dss {
 	reg = <0x58000000 0x80>,
 	      <0x58004054 0x4>,
-- 
2.17.1

WARNING: multiple messages have this Message-ID (diff)
From: Benoit Parrot <bparrot@ti.com>
To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Benoit Parrot <bparrot@ti.com>,
	linux-omap@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [Patch v3 05/10] ARM: dts: DRA72: Add CAL dtsi node
Date: Tue, 12 Nov 2019 08:27:48 -0600	[thread overview]
Message-ID: <20191112142753.22976-6-bparrot@ti.com> (raw)
In-Reply-To: <20191112142753.22976-1-bparrot@ti.com>

This patch adds the required dtsi node to support the Camera
Adaptation Layer (CAL) for the DRA72 family of devices.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 arch/arm/boot/dts/dra72x.dtsi | 43 +++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index f5762709c853..726e46ae887d 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -17,6 +17,49 @@
 	};
 };
 
+&l4_per2 {
+	target-module@5b000 {			/* 0x4845b000, ap 59 46.0 */
+		compatible = "ti,sysc-omap4", "ti,sysc";
+		reg = <0x5b000 0x4>,
+		      <0x5b010 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x5b000 0x1000>;
+
+		cal: cal@0 {
+			compatible = "ti,dra72-cal";
+			reg = <0x0000 0x400>,
+			      <0x0800 0x40>,
+			      <0x0900 0x40>;
+			reg-names = "cal_top",
+				    "cal_rx_core0",
+				    "cal_rx_core1";
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			ti,camerrx-control = <&scm_conf 0xE94>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi2_0: port@0 {
+					reg = <0>;
+				};
+				csi2_1: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
+
 &dss {
 	reg = <0x58000000 0x80>,
 	      <0x58004054 0x4>,
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-11-12 14:25 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-12 14:27 [Patch v3 00/10] ARM: dts: dra7: add cal nodes Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot
2019-11-12 14:27 ` [Patch v3 01/10] clk: ti: dra7: add cam clkctrl data Benoit Parrot
2019-11-12 14:27   ` Benoit Parrot
2019-11-12 14:27   ` Benoit Parrot
2019-11-12 15:27   ` Tony Lindgren
2019-11-12 15:27     ` Tony Lindgren
2019-11-18 17:38   ` Rob Herring
2019-11-18 17:38     ` Rob Herring
2019-11-18 17:38     ` Rob Herring
2019-11-12 14:27 ` [Patch v3 02/10] ARM: dts: dra7: add cam clkctrl node Benoit Parrot
2019-11-12 14:27   ` Benoit Parrot
2019-11-12 14:27   ` Benoit Parrot
2019-11-12 15:29   ` Tony Lindgren
2019-11-12 15:29     ` Tony Lindgren
2019-11-12 14:27 ` [Patch v3 03/10] ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only Benoit Parrot
2019-11-12 14:27   ` Benoit Parrot
2019-11-12 14:27   ` Benoit Parrot
2019-11-12 15:31   ` Tony Lindgren
2019-11-12 15:31     ` Tony Lindgren
2019-11-12 14:27 ` [Patch v3 04/10] ARM: dts: dra7-l4: Add ti-sysc node for CAM Benoit Parrot
2019-11-12 14:27   ` Benoit Parrot
2019-11-12 14:27   ` Benoit Parrot
2019-11-12 14:27 ` Benoit Parrot [this message]
2019-11-12 14:27   ` [Patch v3 05/10] ARM: dts: DRA72: Add CAL dtsi node Benoit Parrot
2019-11-12 14:27   ` Benoit Parrot
2019-11-12 15:34   ` Tony Lindgren
2019-11-12 15:34     ` Tony Lindgren
2019-11-12 14:27 ` [Patch v3 06/10] arm: dts: dra72-evm-common: Add entries for the CSI2 cameras Benoit Parrot
2019-11-12 14:27   ` Benoit Parrot
2019-11-12 14:27   ` Benoit Parrot
2019-11-12 14:27 ` [Patch v3 07/10] arm: dtsi: dra76x: Add CAL dtsi node Benoit Parrot
2019-11-12 14:27   ` Benoit Parrot
2019-11-12 14:27   ` Benoit Parrot
2019-11-12 14:27 ` [Patch v3 08/10] arm: dts: dra76-evm: Add CAL and OV5640 nodes Benoit Parrot
2019-11-12 14:27   ` Benoit Parrot
2019-11-12 14:27   ` Benoit Parrot
2019-11-12 14:27 ` [Patch v3 09/10] arm64: dts: k3-am65-main Add CAL node Benoit Parrot
2019-11-12 14:27   ` Benoit Parrot
2019-11-12 14:27   ` Benoit Parrot
2019-11-12 15:38   ` Tony Lindgren
2019-11-12 15:38     ` Tony Lindgren
2019-11-12 14:27 ` [Patch v3 10/10] arm64: dts: k3-am654-base-board: Add CSI2 OV5640 camera Benoit Parrot
2019-11-12 14:27   ` Benoit Parrot
2019-11-12 14:27   ` Benoit Parrot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191112142753.22976-6-bparrot@ti.com \
    --to=bparrot@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=t-kristo@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.