All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anand Moon <linux.amoon@gmail.com>
To: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Felipe Balbi <balbi@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCHv2 3/3] usb: dwc3: exynos: Add support for Exynos5422 suspend clk
Date: Sun,  1 Mar 2020 21:20:18 +0000	[thread overview]
Message-ID: <20200301212019.2248-4-linux.amoon@gmail.com> (raw)
In-Reply-To: <20200301212019.2248-1-linux.amoon@gmail.com>

Exynos5422 DWC3 module support two clk USBD300 and SCLK_USBD300
so add missing code to enable/disable code and suspend clk, for this
add a new compatible samsung,exynos5420-dwusb3 to help configure
dwc3 code and dwc3 suspend clock. Suspend clock controls the PHY power
change from P0 to P1/P2/P3 during U0 to U1/U2/U3 transition.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
Append the Power Managment State control by the suspend clk for USB3.0
---
 drivers/usb/dwc3/dwc3-exynos.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index 90bb022737da..48b68b6f0dc8 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -162,6 +162,12 @@ static const struct dwc3_exynos_driverdata exynos5250_drvdata = {
 	.suspend_clk_idx = -1,
 };
 
+static const struct dwc3_exynos_driverdata exynos5420_drvdata = {
+	.clk_names = { "usbdrd30", "usbdrd30_susp_clk"},
+	.num_clks = 2,
+	.suspend_clk_idx = 1,
+};
+
 static const struct dwc3_exynos_driverdata exynos5433_drvdata = {
 	.clk_names = { "aclk", "susp_clk", "pipe_pclk", "phyclk" },
 	.num_clks = 4,
@@ -178,6 +184,9 @@ static const struct of_device_id exynos_dwc3_match[] = {
 	{
 		.compatible = "samsung,exynos5250-dwusb3",
 		.data = &exynos5250_drvdata,
+	}, {
+		.compatible = "samsung,exynos5420-dwusb3",
+		.data = &exynos5420_drvdata,
 	}, {
 		.compatible = "samsung,exynos5433-dwusb3",
 		.data = &exynos5433_drvdata,
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>,
	Felipe Balbi <balbi@kernel.org>,
	linux-samsung-soc@vger.kernel.org,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-kernel@vger.kernel.org,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Marek Szyprowski <m.szyprowski@samsung.com>
Subject: [PATCHv2 3/3] usb: dwc3: exynos: Add support for Exynos5422 suspend clk
Date: Sun,  1 Mar 2020 21:20:18 +0000	[thread overview]
Message-ID: <20200301212019.2248-4-linux.amoon@gmail.com> (raw)
In-Reply-To: <20200301212019.2248-1-linux.amoon@gmail.com>

Exynos5422 DWC3 module support two clk USBD300 and SCLK_USBD300
so add missing code to enable/disable code and suspend clk, for this
add a new compatible samsung,exynos5420-dwusb3 to help configure
dwc3 code and dwc3 suspend clock. Suspend clock controls the PHY power
change from P0 to P1/P2/P3 during U0 to U1/U2/U3 transition.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
Append the Power Managment State control by the suspend clk for USB3.0
---
 drivers/usb/dwc3/dwc3-exynos.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index 90bb022737da..48b68b6f0dc8 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -162,6 +162,12 @@ static const struct dwc3_exynos_driverdata exynos5250_drvdata = {
 	.suspend_clk_idx = -1,
 };
 
+static const struct dwc3_exynos_driverdata exynos5420_drvdata = {
+	.clk_names = { "usbdrd30", "usbdrd30_susp_clk"},
+	.num_clks = 2,
+	.suspend_clk_idx = 1,
+};
+
 static const struct dwc3_exynos_driverdata exynos5433_drvdata = {
 	.clk_names = { "aclk", "susp_clk", "pipe_pclk", "phyclk" },
 	.num_clks = 4,
@@ -178,6 +184,9 @@ static const struct of_device_id exynos_dwc3_match[] = {
 	{
 		.compatible = "samsung,exynos5250-dwusb3",
 		.data = &exynos5250_drvdata,
+	}, {
+		.compatible = "samsung,exynos5420-dwusb3",
+		.data = &exynos5420_drvdata,
 	}, {
 		.compatible = "samsung,exynos5433-dwusb3",
 		.data = &exynos5433_drvdata,
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-03-01 21:20 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-01 21:20 [PATCHv2 0/3] Add support for suspend clk for Exynos5422 SoC Anand Moon
2020-03-01 21:20 ` Anand Moon
2020-03-01 21:20 ` [PATCHv2 1/3] devicetree: bindings: exynos: Add new compatible for Exynos5420 dwc3 clocks support Anand Moon
2020-03-01 21:20   ` Anand Moon
2020-03-03  9:46   ` Krzysztof Kozlowski
2020-03-03  9:46     ` Krzysztof Kozlowski
2020-03-05  4:07     ` Anand Moon
2020-03-05  4:07       ` Anand Moon
2020-03-04 17:00   ` Rob Herring
2020-03-04 17:00     ` Rob Herring
2020-03-15  9:28   ` Felipe Balbi
2020-03-15  9:28     ` Felipe Balbi
2020-03-01 21:20 ` [PATCHv2 2/3] ARM: dts: exynos: Add missing usbdrd3 suspend clk Anand Moon
2020-03-01 21:20   ` Anand Moon
2020-03-01 21:20 ` Anand Moon [this message]
2020-03-01 21:20   ` [PATCHv2 3/3] usb: dwc3: exynos: Add support for Exynos5422 " Anand Moon
2020-03-04  8:11 ` [PATCHv2 0/3] Add support for suspend clk for Exynos5422 SoC Krzysztof Kozlowski
2020-03-04  8:11   ` Krzysztof Kozlowski
2020-03-04 17:53   ` Anand Moon
2020-03-04 17:53     ` Anand Moon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200301212019.2248-4-linux.amoon@gmail.com \
    --to=linux.amoon@gmail.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=balbi@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.