All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jim Quinlan <james.quinlan@broadcom.com>
To: linux-pci@vger.kernel.org,
	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	bcm-kernel-feedback-list@broadcom.com,
	james.quinlan@broadcom.com
Cc: Jim Quinlan <james.quinlan@broadcom.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM
	BCM7XXX ARM ARCHITECTURE),
	linux-rpi-kernel@lists.infradead.org (moderated list:BROADCOM
	BCM2711/BCM2835 ARM ARCHITECTURE),
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v6 03/12] dt-bindings: PCI: Add bindings for more Brcmstb chips
Date: Wed,  1 Jul 2020 17:21:33 -0400	[thread overview]
Message-ID: <20200701212155.37830-4-james.quinlan@broadcom.com> (raw)
In-Reply-To: <20200701212155.37830-1-james.quinlan@broadcom.com>

From: Jim Quinlan <jquinlan@broadcom.com>

- Add compatible strings for three more Broadcom STB chips: 7278, 7216,
  7211 (STB version of RPi4).
- Add new property 'brcm,scb-sizes'.
- Add new property 'resets'.
- Add new property 'reset-names' for 7216 only.
- Allow 'ranges' and 'dma-ranges' to have more than one item and update
  the example to show this.

Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/pci/brcm,stb-pcie.yaml           | 56 ++++++++++++++++---
 1 file changed, 49 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 8680a0f86c5a..807694b4f41f 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -9,12 +9,15 @@ title: Brcmstb PCIe Host Controller Device Tree Bindings
 maintainers:
   - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
 
-allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
-
 properties:
   compatible:
-    const: brcm,bcm2711-pcie # The Raspberry Pi 4
+    items:
+      - enum:
+          - brcm,bcm2711-pcie # The Raspberry Pi 4
+          - brcm,bcm7211-pcie # Broadcom STB version of RPi4
+          - brcm,bcm7278-pcie # Broadcom 7278 Arm
+          - brcm,bcm7216-pcie # Broadcom 7216 Arm
+          - brcm,bcm7445-pcie # Broadcom 7445 Arm
 
   reg:
     maxItems: 1
@@ -34,10 +37,12 @@ properties:
       - const: msi
 
   ranges:
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
 
   dma-ranges:
-    maxItems: 1
+    minItems: 1
+    maxItems: 6
 
   clocks:
     maxItems: 1
@@ -58,8 +63,31 @@ properties:
 
   aspm-no-l0s: true
 
+  resets:
+    description: for "brcm,bcm7216-pcie", must be a valid reset
+      phandle pointing to the RESCAL reset controller provider node.
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  reset-names:
+    items:
+      - const: rescal
+
+  brcm,scb-sizes:
+    description: u64 giving the 64bit PCIe memory
+      viewport size of a memory controller.  There may be up to
+      three controllers, and each size must be a power of two
+      with a size greater or equal to the amount of memory the
+      controller supports.  Note that each memory controller
+      may have two component regions -- base and extended -- so
+      this information cannot be deduced from the dma-ranges.
+    $ref: /schemas/types.yaml#/definitions/uint64-array
+    items:
+      minItems: 1
+      maxItems: 3
+
 required:
   - reg
+  - ranges
   - dma-ranges
   - "#interrupt-cells"
   - interrupts
@@ -68,6 +96,18 @@ required:
   - interrupt-map
   - msi-controller
 
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm7216-pcie
+    then:
+      required:
+        - resets
+        - reset-names
+
 unevaluatedProperties: false
 
 examples:
@@ -93,7 +133,9 @@ examples:
                     msi-parent = <&pcie0>;
                     msi-controller;
                     ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
-                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
+                    dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
+                                 <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
                     brcm,enable-ssc;
+                    brcm,scb-sizes =  <0x0000000080000000 0x0000000080000000>;
             };
     };
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Jim Quinlan <james.quinlan@broadcom.com>
To: linux-pci@vger.kernel.org,
	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	bcm-kernel-feedback-list@broadcom.com,
	james.quinlan@broadcom.com
Cc: "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	Florian Fainelli <f.fainelli@gmail.com>,
	open list <linux-kernel@vger.kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	"moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE"
	<linux-rpi-kernel@lists.infradead.org>,
	Jim Quinlan <james.quinlan@broadcom.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	"moderated list:BROADCOM BCM7XXX ARM ARCHITECTURE"
	<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v6 03/12] dt-bindings: PCI: Add bindings for more Brcmstb chips
Date: Wed,  1 Jul 2020 17:21:33 -0400	[thread overview]
Message-ID: <20200701212155.37830-4-james.quinlan@broadcom.com> (raw)
In-Reply-To: <20200701212155.37830-1-james.quinlan@broadcom.com>

From: Jim Quinlan <jquinlan@broadcom.com>

- Add compatible strings for three more Broadcom STB chips: 7278, 7216,
  7211 (STB version of RPi4).
- Add new property 'brcm,scb-sizes'.
- Add new property 'resets'.
- Add new property 'reset-names' for 7216 only.
- Allow 'ranges' and 'dma-ranges' to have more than one item and update
  the example to show this.

Signed-off-by: Jim Quinlan <jquinlan@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/pci/brcm,stb-pcie.yaml           | 56 ++++++++++++++++---
 1 file changed, 49 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 8680a0f86c5a..807694b4f41f 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -9,12 +9,15 @@ title: Brcmstb PCIe Host Controller Device Tree Bindings
 maintainers:
   - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
 
-allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
-
 properties:
   compatible:
-    const: brcm,bcm2711-pcie # The Raspberry Pi 4
+    items:
+      - enum:
+          - brcm,bcm2711-pcie # The Raspberry Pi 4
+          - brcm,bcm7211-pcie # Broadcom STB version of RPi4
+          - brcm,bcm7278-pcie # Broadcom 7278 Arm
+          - brcm,bcm7216-pcie # Broadcom 7216 Arm
+          - brcm,bcm7445-pcie # Broadcom 7445 Arm
 
   reg:
     maxItems: 1
@@ -34,10 +37,12 @@ properties:
       - const: msi
 
   ranges:
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
 
   dma-ranges:
-    maxItems: 1
+    minItems: 1
+    maxItems: 6
 
   clocks:
     maxItems: 1
@@ -58,8 +63,31 @@ properties:
 
   aspm-no-l0s: true
 
+  resets:
+    description: for "brcm,bcm7216-pcie", must be a valid reset
+      phandle pointing to the RESCAL reset controller provider node.
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  reset-names:
+    items:
+      - const: rescal
+
+  brcm,scb-sizes:
+    description: u64 giving the 64bit PCIe memory
+      viewport size of a memory controller.  There may be up to
+      three controllers, and each size must be a power of two
+      with a size greater or equal to the amount of memory the
+      controller supports.  Note that each memory controller
+      may have two component regions -- base and extended -- so
+      this information cannot be deduced from the dma-ranges.
+    $ref: /schemas/types.yaml#/definitions/uint64-array
+    items:
+      minItems: 1
+      maxItems: 3
+
 required:
   - reg
+  - ranges
   - dma-ranges
   - "#interrupt-cells"
   - interrupts
@@ -68,6 +96,18 @@ required:
   - interrupt-map
   - msi-controller
 
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm7216-pcie
+    then:
+      required:
+        - resets
+        - reset-names
+
 unevaluatedProperties: false
 
 examples:
@@ -93,7 +133,9 @@ examples:
                     msi-parent = <&pcie0>;
                     msi-controller;
                     ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
-                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
+                    dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
+                                 <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
                     brcm,enable-ssc;
+                    brcm,scb-sizes =  <0x0000000080000000 0x0000000080000000>;
             };
     };
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-07-01 21:22 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-01 21:21 [PATCH v6 00/12] PCI: brcmstb: enable PCIe for STB chips Jim Quinlan
2020-07-01 21:21 ` Jim Quinlan
2020-07-01 21:21 ` Jim Quinlan
2020-07-01 21:21 ` Jim Quinlan via iommu
2020-07-01 21:21 ` Jim Quinlan
2020-07-01 21:21 ` Jim Quinlan
2020-07-01 21:21 ` [PATCH v6 01/12] PCI: brcmstb: PCIE_BRCMSTB depends on ARCH_BRCMSTB Jim Quinlan
2020-07-01 21:21 ` [PATCH v6 02/12] ata: ahci_brcm: Fix use of BCM7216 reset controller Jim Quinlan
2020-07-02  9:32   ` Sergei Shtylyov
2020-07-06 14:31     ` Jim Quinlan
2020-07-01 21:21 ` Jim Quinlan [this message]
2020-07-01 21:21   ` [PATCH v6 03/12] dt-bindings: PCI: Add bindings for more Brcmstb chips Jim Quinlan
2020-07-01 21:21 ` [PATCH v6 04/12] PCI: brcmstb: Add bcm7278 register info Jim Quinlan
2020-07-01 21:21   ` Jim Quinlan
2020-07-01 21:21 ` [PATCH v6 05/12] PCI: brcmstb: Add suspend and resume pm_ops Jim Quinlan
2020-07-01 21:21   ` Jim Quinlan
2020-07-01 21:21 ` [PATCH v6 06/12] PCI: brcmstb: Add bcm7278 PERST# support Jim Quinlan
2020-07-01 21:21   ` Jim Quinlan
2020-07-01 21:21 ` [PATCH v6 07/12] PCI: brcmstb: Add control of rescal reset Jim Quinlan
2020-07-01 21:21   ` Jim Quinlan
2020-07-01 21:21 ` [PATCH v6 08/12] device core: Introduce DMA range map, supplanting dma_pfn_offset Jim Quinlan
2020-07-01 21:21   ` Jim Quinlan
2020-07-01 21:21   ` Jim Quinlan via iommu
2020-07-02  5:21   ` kernel test robot
2020-07-02  8:42   ` Andy Shevchenko
2020-07-02  8:42     ` Andy Shevchenko
2020-07-02  8:42     ` Andy Shevchenko
2020-07-06 13:40     ` Jim Quinlan
2020-07-06 13:40       ` Jim Quinlan
2020-07-06 13:40       ` Jim Quinlan via iommu
2020-07-07 13:27   ` Dan Carpenter
2020-07-07 13:27     ` Dan Carpenter
2020-07-07 13:27     ` Dan Carpenter
2020-07-07 13:27     ` Dan Carpenter
2020-07-07 14:44     ` Jim Quinlan
2020-07-07 14:44       ` Jim Quinlan
2020-07-07 14:44       ` Jim Quinlan
2020-07-07 15:11       ` Dan Carpenter
2020-07-07 15:11         ` Dan Carpenter
2020-07-07 15:11         ` Dan Carpenter
2020-07-07 15:11         ` Dan Carpenter
2020-07-01 21:21 ` [PATCH v6 09/12] PCI: brcmstb: Set additional internal memory DMA viewport sizes Jim Quinlan
2020-07-01 21:21   ` Jim Quinlan
2020-07-01 21:21 ` [PATCH v6 10/12] PCI: brcmstb: Accommodate MSI for older chips Jim Quinlan
2020-07-01 21:21   ` Jim Quinlan
2020-07-01 21:21 ` [PATCH v6 11/12] PCI: brcmstb: Set bus max burst size by chip type Jim Quinlan
2020-07-01 21:21   ` Jim Quinlan
2020-07-01 21:21 ` [PATCH v6 12/12] PCI: brcmstb: Add bcm7211, bcm7216, bcm7445, bcm7278 to match list Jim Quinlan
2020-07-01 21:21   ` Jim Quinlan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200701212155.37830-4-james.quinlan@broadcom.com \
    --to=james.quinlan@broadcom.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=nsaenzjulienne@suse.de \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.