All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michal Simek <michal.simek@xilinx.com>
To: linux-arm-kernel@lists.infradead.org, git@xilinx.com
Cc: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>,
	Harini Katakam <harini.katakam@xilinx.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Rajan Vaja <rajan.vaja@xilinx.com>,
	Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 4/8] arm64: zynqmp: Turn comment to gpio-line-names
Date: Thu,  9 Jan 2020 14:52:18 +0100	[thread overview]
Message-ID: <daa153e9b77184e29a4064efebd759cfb999de7a.1578577931.git.michal.simek@xilinx.com> (raw)
In-Reply-To: <cover.1578577931.git.michal.simek@xilinx.com>

Label gpio lines properly.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

Changes in v2: None

 .../boot/dts/xilinx/zynqmp-zcu102-revA.dts    | 43 ++++---------------
 1 file changed, 9 insertions(+), 34 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 7c6b538490f8..c96e8416fa7e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -125,21 +125,11 @@ &i2c0 {
 	tca6416_u97: gpio@20 {
 		compatible = "ti,tca6416";
 		reg = <0x20>;
-		gpio-controller;
+		gpio-controller; /* IRQ not connected */
 		#gpio-cells = <2>;
-		/*
-		 * IRQ not connected
-		 * Lines:
-		 * 0 - PS_GTR_LAN_SEL0
-		 * 1 - PS_GTR_LAN_SEL1
-		 * 2 - PS_GTR_LAN_SEL2
-		 * 3 - PS_GTR_LAN_SEL3
-		 * 4 - PCI_CLK_DIR_SEL
-		 * 5 - IIC_MUX_RESET_B
-		 * 6 - GEM3_EXP_RESET_B
-		 * 7, 10 - 17 - not connected
-		 */
-
+		gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
+				"PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
+				"", "", "", "", "", "", "", "", "";
 		gtr-sel0 {
 			gpio-hog;
 			gpios = <0 0>;
@@ -169,27 +159,12 @@ gtr-sel3 {
 	tca6416_u61: gpio@21 {
 		compatible = "ti,tca6416";
 		reg = <0x21>;
-		gpio-controller;
+		gpio-controller; /* IRQ not connected */
 		#gpio-cells = <2>;
-		/*
-		 * IRQ not connected
-		 * Lines:
-		 * 0 - VCCPSPLL_EN
-		 * 1 - MGTRAVCC_EN
-		 * 2 - MGTRAVTT_EN
-		 * 3 - VCCPSDDRPLL_EN
-		 * 4 - MIO26_PMU_INPUT_LS
-		 * 5 - PL_PMBUS_ALERT
-		 * 6 - PS_PMBUS_ALERT
-		 * 7 - MAXIM_PMBUS_ALERT
-		 * 10 - PL_DDR4_VTERM_EN
-		 * 11 - PL_DDR4_VPP_2V5_EN
-		 * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
-		 * 13 - PS_DIMM_SUSPEND_EN
-		 * 14 - PS_DDR4_VTERM_EN
-		 * 15 - PS_DDR4_VPP_2V5_EN
-		 * 16 - 17 - not connected
-		 */
+		gpio-line-names = "VCCPSPLL_EN", "MGTRAVCC_EN", "MGTRAVTT_EN", "VCCPSDDRPLL_EN", "MIO26_PMU_INPUT_LS",
+				"PL_PMBUS_ALERT", "PS_PMBUS_ALERT", "MAXIM_PMBUS_ALERT", "PL_DDR4_VTERM_EN",
+				"PL_DDR4_VPP_2V5_EN", "PS_DIMM_VDDQ_TO_PSVCCO_ON", "PS_DIMM_SUSPEND_EN",
+				"PS_DDR4_VTERM_EN", "PS_DDR4_VPP_2V5_EN", "", "";
 	};
 
 	i2c-mux@75 { /* u60 */
-- 
2.24.0


WARNING: multiple messages have this Message-ID (diff)
From: Michal Simek <michal.simek@xilinx.com>
To: linux-arm-kernel@lists.infradead.org, git@xilinx.com
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org,
	Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>,
	Rajan Vaja <rajan.vaja@xilinx.com>,
	linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	Harini Katakam <harini.katakam@xilinx.com>
Subject: [PATCH v2 4/8] arm64: zynqmp: Turn comment to gpio-line-names
Date: Thu,  9 Jan 2020 14:52:18 +0100	[thread overview]
Message-ID: <daa153e9b77184e29a4064efebd759cfb999de7a.1578577931.git.michal.simek@xilinx.com> (raw)
In-Reply-To: <cover.1578577931.git.michal.simek@xilinx.com>

Label gpio lines properly.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

Changes in v2: None

 .../boot/dts/xilinx/zynqmp-zcu102-revA.dts    | 43 ++++---------------
 1 file changed, 9 insertions(+), 34 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 7c6b538490f8..c96e8416fa7e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -125,21 +125,11 @@ &i2c0 {
 	tca6416_u97: gpio@20 {
 		compatible = "ti,tca6416";
 		reg = <0x20>;
-		gpio-controller;
+		gpio-controller; /* IRQ not connected */
 		#gpio-cells = <2>;
-		/*
-		 * IRQ not connected
-		 * Lines:
-		 * 0 - PS_GTR_LAN_SEL0
-		 * 1 - PS_GTR_LAN_SEL1
-		 * 2 - PS_GTR_LAN_SEL2
-		 * 3 - PS_GTR_LAN_SEL3
-		 * 4 - PCI_CLK_DIR_SEL
-		 * 5 - IIC_MUX_RESET_B
-		 * 6 - GEM3_EXP_RESET_B
-		 * 7, 10 - 17 - not connected
-		 */
-
+		gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
+				"PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
+				"", "", "", "", "", "", "", "", "";
 		gtr-sel0 {
 			gpio-hog;
 			gpios = <0 0>;
@@ -169,27 +159,12 @@ gtr-sel3 {
 	tca6416_u61: gpio@21 {
 		compatible = "ti,tca6416";
 		reg = <0x21>;
-		gpio-controller;
+		gpio-controller; /* IRQ not connected */
 		#gpio-cells = <2>;
-		/*
-		 * IRQ not connected
-		 * Lines:
-		 * 0 - VCCPSPLL_EN
-		 * 1 - MGTRAVCC_EN
-		 * 2 - MGTRAVTT_EN
-		 * 3 - VCCPSDDRPLL_EN
-		 * 4 - MIO26_PMU_INPUT_LS
-		 * 5 - PL_PMBUS_ALERT
-		 * 6 - PS_PMBUS_ALERT
-		 * 7 - MAXIM_PMBUS_ALERT
-		 * 10 - PL_DDR4_VTERM_EN
-		 * 11 - PL_DDR4_VPP_2V5_EN
-		 * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
-		 * 13 - PS_DIMM_SUSPEND_EN
-		 * 14 - PS_DDR4_VTERM_EN
-		 * 15 - PS_DDR4_VPP_2V5_EN
-		 * 16 - 17 - not connected
-		 */
+		gpio-line-names = "VCCPSPLL_EN", "MGTRAVCC_EN", "MGTRAVTT_EN", "VCCPSDDRPLL_EN", "MIO26_PMU_INPUT_LS",
+				"PL_PMBUS_ALERT", "PS_PMBUS_ALERT", "MAXIM_PMBUS_ALERT", "PL_DDR4_VTERM_EN",
+				"PL_DDR4_VPP_2V5_EN", "PS_DIMM_VDDQ_TO_PSVCCO_ON", "PS_DIMM_SUSPEND_EN",
+				"PS_DDR4_VTERM_EN", "PS_DDR4_VPP_2V5_EN", "", "";
 	};
 
 	i2c-mux@75 { /* u60 */
-- 
2.24.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-01-09 13:52 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-09 13:52 [PATCH v2 0/8] arm64: zynqmp: Various DT fixes Michal Simek
2020-01-09 13:52 ` Michal Simek
2020-01-09 13:52 ` [PATCH v2 1/8] arm64: zynqmp: Use ethernet-phy as node name for ethernet phys Michal Simek
2020-01-09 13:52   ` Michal Simek
2020-01-09 13:52 ` [PATCH v2 2/8] arm64: zynqmp: Remove addition number in node name Michal Simek
2020-01-09 13:52   ` Michal Simek
2020-01-09 13:52 ` [PATCH v2 3/8] arm64: zynqmp: Fix address for tca6416_u97 chip on zcu104 Michal Simek
2020-01-09 13:52   ` Michal Simek
2020-01-09 13:52 ` Michal Simek [this message]
2020-01-09 13:52   ` [PATCH v2 4/8] arm64: zynqmp: Turn comment to gpio-line-names Michal Simek
2020-01-09 13:52 ` [PATCH v2 5/8] arm64: zynqmp: Setup clock-output-names for si570 chips Michal Simek
2020-01-09 13:52   ` Michal Simek
2020-01-09 13:52 ` [PATCH v2 6/8] arm64: zynqmp: Fix the si570 clock frequency on zcu111 Michal Simek
2020-01-09 13:52   ` Michal Simek
2020-01-09 13:52 ` [PATCH v2 7/8] arm64: zynqmp: Remove broken-cd from zcu100-revC Michal Simek
2020-01-09 13:52   ` Michal Simek
2020-01-09 13:52 ` [PATCH v2 8/8] arm64: zynqmp: Setup default number of chipselects for zcu100 Michal Simek
2020-01-09 13:52   ` Michal Simek
2020-01-21  9:51 ` [PATCH v2 0/8] arm64: zynqmp: Various DT fixes Michal Simek
2020-01-21  9:51   ` Michal Simek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=daa153e9b77184e29a4064efebd759cfb999de7a.1578577931.git.michal.simek@xilinx.com \
    --to=michal.simek@xilinx.com \
    --cc=anurag.kumar.vulisha@xilinx.com \
    --cc=devicetree@vger.kernel.org \
    --cc=git@xilinx.com \
    --cc=harini.katakam@xilinx.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=rajan.vaja@xilinx.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.