All of lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Lucas Tanure <tanureal@opensource.cirrus.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	<alsa-devel@alsa-project.org>, <patches@opensource.cirrus.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 00/20] Support external boost at CS35l41 ASoC driver
Date: Fri, 04 Mar 2022 18:05:25 +0100	[thread overview]
Message-ID: <s5htucdr6lm.wl-tiwai@suse.de> (raw)
In-Reply-To: <20220304150721.3802-1-tanureal@opensource.cirrus.com>

On Fri, 04 Mar 2022 16:07:01 +0100,
Lucas Tanure wrote:
> 
> Move the support for CS35L41 external boost to its shared library
> for ASoC use.
> This move resulted in cs35l41_hda_reg_sequence being removed,
> and its steps were broken down into regmap writes or functions
> from the library. And hardware configuration struct was unified
> for its use in the shared lib.
> While at it, some minor bugs were found and fixed it.
> 
> v2 changelog:
>  - Instead of removing the log, playback actions will log the last regmap access.
>  - Documentation patch with the correct subject line and fixed bug reported by Rob Herring on the
>  provided example.
> 
> Previous versions:
>  v1: https://lkml.org/lkml/2022/3/3/759
> 
> David Rhodes (2):
>   ASoC: cs35l41: Fix GPIO2 configuration
>   ASoC: cs35l41: Document CS35l41 External Boost
> 
> Lucas Tanure (18):
>   ASoC: cs35l41: Fix max number of TX channels
>   ASoC: cs35l41: Fix DSP mbox start command and global enable order
>   ASoC: cs35l41: Remove unnecessary param
>   sound: cs35l41: Unify hardware configuration
>   sound: cs35l41: Check hw_config before using it
>   sound: cs35l41: Move cs35l41_gpio_config to shared lib
>   hda: cs35l41: Fix I2S params comments
>   hda: cs35l41: Always configure the DAI
>   hda: cs35l41: Add Boost type flag
>   hda: cs35l41: Put the device into safe mode for external boost
>   hda: cs35l41: Mute the device before shutdown
>   sound: cs35l41: Enable Internal Boost in shared lib
>   hda: cs35l41: Move boost config to initialization code
>   hda: cs35l41: Remove cs35l41_hda_reg_sequence struct
>   hda: cs35l41: Reorganize log for playback actions
>   hda: cs35l41: Handle all external boost setups the same way
>   hda: cs35l41: Move external boost handling to lib for ASoC use
>   ASoC: cs35l41: Support external boost

Through a quick glance, the code changes look OK in general.
But please correct the subject prefix.  For non-ASoC patches (that
begin with either "hda" or "sound" in this patch set) should be with
"ALSA: hda: xxx" or such.

Also, although I respect the spirit of Haiku, the patch logs could be
a bit more verbose and descriptive, and the texts can be folded at the
right column.  Some patch descriptions are too short, e.g. patch 15
doesn't mention about the new usleep_range() addition in the code.


thanks,

Takashi

WARNING: multiple messages have this Message-ID (diff)
From: Takashi Iwai <tiwai@suse.de>
To: Lucas Tanure <tanureal@opensource.cirrus.com>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
	patches@opensource.cirrus.com, Takashi Iwai <tiwai@suse.com>,
	Rob Herring <robh+dt@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 00/20] Support external boost at CS35l41 ASoC driver
Date: Fri, 04 Mar 2022 18:05:25 +0100	[thread overview]
Message-ID: <s5htucdr6lm.wl-tiwai@suse.de> (raw)
In-Reply-To: <20220304150721.3802-1-tanureal@opensource.cirrus.com>

On Fri, 04 Mar 2022 16:07:01 +0100,
Lucas Tanure wrote:
> 
> Move the support for CS35L41 external boost to its shared library
> for ASoC use.
> This move resulted in cs35l41_hda_reg_sequence being removed,
> and its steps were broken down into regmap writes or functions
> from the library. And hardware configuration struct was unified
> for its use in the shared lib.
> While at it, some minor bugs were found and fixed it.
> 
> v2 changelog:
>  - Instead of removing the log, playback actions will log the last regmap access.
>  - Documentation patch with the correct subject line and fixed bug reported by Rob Herring on the
>  provided example.
> 
> Previous versions:
>  v1: https://lkml.org/lkml/2022/3/3/759
> 
> David Rhodes (2):
>   ASoC: cs35l41: Fix GPIO2 configuration
>   ASoC: cs35l41: Document CS35l41 External Boost
> 
> Lucas Tanure (18):
>   ASoC: cs35l41: Fix max number of TX channels
>   ASoC: cs35l41: Fix DSP mbox start command and global enable order
>   ASoC: cs35l41: Remove unnecessary param
>   sound: cs35l41: Unify hardware configuration
>   sound: cs35l41: Check hw_config before using it
>   sound: cs35l41: Move cs35l41_gpio_config to shared lib
>   hda: cs35l41: Fix I2S params comments
>   hda: cs35l41: Always configure the DAI
>   hda: cs35l41: Add Boost type flag
>   hda: cs35l41: Put the device into safe mode for external boost
>   hda: cs35l41: Mute the device before shutdown
>   sound: cs35l41: Enable Internal Boost in shared lib
>   hda: cs35l41: Move boost config to initialization code
>   hda: cs35l41: Remove cs35l41_hda_reg_sequence struct
>   hda: cs35l41: Reorganize log for playback actions
>   hda: cs35l41: Handle all external boost setups the same way
>   hda: cs35l41: Move external boost handling to lib for ASoC use
>   ASoC: cs35l41: Support external boost

Through a quick glance, the code changes look OK in general.
But please correct the subject prefix.  For non-ASoC patches (that
begin with either "hda" or "sound" in this patch set) should be with
"ALSA: hda: xxx" or such.

Also, although I respect the spirit of Haiku, the patch logs could be
a bit more verbose and descriptive, and the texts can be folded at the
right column.  Some patch descriptions are too short, e.g. patch 15
doesn't mention about the new usleep_range() addition in the code.


thanks,

Takashi

  parent reply	other threads:[~2022-03-04 17:05 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-04 15:07 [PATCH v2 00/20] Support external boost at CS35l41 ASoC driver Lucas Tanure
2022-03-04 15:07 ` Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 01/20] ASoC: cs35l41: Fix GPIO2 configuration Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 15:22   ` Charles Keepax
2022-03-04 15:22     ` Charles Keepax
2022-03-04 15:44     ` tanureal
2022-03-04 15:07 ` [PATCH v2 02/20] ASoC: cs35l41: Fix max number of TX channels Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 03/20] ASoC: cs35l41: Fix DSP mbox start command and global enable order Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 04/20] ASoC: cs35l41: Remove unnecessary param Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 05/20] sound: cs35l41: Unify hardware configuration Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 06/20] sound: cs35l41: Check hw_config before using it Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 07/20] sound: cs35l41: Move cs35l41_gpio_config to shared lib Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 08/20] hda: cs35l41: Fix I2S params comments Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 09/20] hda: cs35l41: Always configure the DAI Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 10/20] hda: cs35l41: Add Boost type flag Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 11/20] hda: cs35l41: Put the device into safe mode for external boost Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 12/20] hda: cs35l41: Mute the device before shutdown Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 13/20] sound: cs35l41: Enable Internal Boost in shared lib Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 16:17   ` Charles Keepax
2022-03-04 16:17     ` Charles Keepax
2022-03-04 15:07 ` [PATCH v2 14/20] hda: cs35l41: Move boost config to initialization code Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 15/20] hda: cs35l41: Remove cs35l41_hda_reg_sequence struct Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 16/20] hda: cs35l41: Reorganize log for playback actions Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 17/20] hda: cs35l41: Handle all external boost setups the same way Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 18/20] hda: cs35l41: Move external boost handling to lib for ASoC use Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 19/20] ASoC: cs35l41: Support external boost Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 15:07 ` [PATCH v2 20/20] ASoC: cs35l41: Document CS35l41 External Boost Lucas Tanure
2022-03-04 15:07   ` Lucas Tanure
2022-03-04 17:05 ` Takashi Iwai [this message]
2022-03-04 17:05   ` [PATCH v2 00/20] Support external boost at CS35l41 ASoC driver Takashi Iwai
2022-03-07 20:38 ` (subset) " Mark Brown
2022-03-07 20:38   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5htucdr6lm.wl-tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    --cc=perex@perex.cz \
    --cc=robh+dt@kernel.org \
    --cc=tanureal@opensource.cirrus.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.