From: Corentin Labbe <clabbe@baylibre.com> To: arnd@arndb.de, linus.walleij@linaro.org, olof@lixom.net, robh+dt@kernel.org, soc@kernel.org, ulli.kroll@googlemail.com Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Corentin Labbe <clabbe@baylibre.com> Subject: [PATCH v2 4/5] ARM: gemini: add device tree for edimax NS2502 Date: Fri, 18 Jun 2021 20:55:32 +0000 [thread overview] Message-ID: <20210618205533.1527384-5-clabbe@baylibre.com> (raw) In-Reply-To: <20210618205533.1527384-1-clabbe@baylibre.com> The edimax NS2502 is a NAS box running a SL3516 SoC. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/gemini-ns2502.dts | 148 ++++++++++++++++++++++++++++ 2 files changed, 149 insertions(+) create mode 100644 arch/arm/boot/dts/gemini-ns2502.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 863347b6b65e..806715f3266d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -217,6 +217,7 @@ dtb-$(CONFIG_ARCH_GEMINI) += \ gemini-dlink-dir-685.dtb \ gemini-dlink-dns-313.dtb \ gemini-nas4220b.dtb \ + gemini-ns2502.dtb \ gemini-rut1xx.dtb \ gemini-sl93512r.dtb \ gemini-sq201.dtb \ diff --git a/arch/arm/boot/dts/gemini-ns2502.dts b/arch/arm/boot/dts/gemini-ns2502.dts new file mode 100644 index 000000000000..704abd212df5 --- /dev/null +++ b/arch/arm/boot/dts/gemini-ns2502.dts @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com> + * Device Tree file for Edimax NS 2502 + */ + +/dts-v1/; + +#include "gemini.dtsi" + +/ { + model = "Edimax NS-2502"; + compatible = "edimax,ns-2502", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + aliases { + mdio-gpio0 = &mdio0; + }; + + chosen { + bootargs = "console=ttyS0,19200n8"; + stdout-path = &uart0; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + /* We lack the knowledge of necessary GPIO to achieve + * Gigabit + */ + max-speed = <100>; + }; + }; +}; + +ðernet { + status = "okay"; + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; +}; + +&flash { + status = "okay"; + /* 8MB of flash */ + reg = <0x30000000 0x00800000>; + + pinctrl-names = "enabled", "disabled"; + pinctrl-0 = <&pflash_default_pins>; + pinctrl-1 = <&pflash_disabled_pins>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x00020000>; + }; + partition@20000 { + label = "kernel"; + reg = <0x00020000 0x00700000>; + }; + partition@720000 { + label = "VCTL"; + reg = <0x00720000 0x00020000>; + }; + partition@740000 { + label = "CurConf"; + reg = <0x00740000 0x000a0000>; + }; + partition@7e0000 { + label = "FIS"; + reg = <0x007e0000 0x00010000>; + }; + }; +}; + +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; +}; + +&ide0 { + status = "okay"; +}; + +&ide1 { + status = "okay"; +}; + +&sata { + cortina,gemini-ata-muxmode = <3>; + cortina,gemini-enable-sata-bridge; + status = "okay"; +}; + +&syscon { + pinctrl { + /* + * gpio0agrp cover line 0-4 + * gpio0bgrp cover line 5 + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0agrp", "gpio0bgrp", "gpio0hgrp"; + }; + }; + pflash_disabled_pins: pinctrl-pflash-disabled { + mux { + function = "gpio0"; + groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp", + "gpio0kgrp"; + }; + }; + pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmii_gmac0_grp"; + }; + }; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; -- 2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Corentin Labbe <clabbe@baylibre.com> To: arnd@arndb.de, linus.walleij@linaro.org, olof@lixom.net, robh+dt@kernel.org, soc@kernel.org, ulli.kroll@googlemail.com Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Corentin Labbe <clabbe@baylibre.com> Subject: [PATCH v2 4/5] ARM: gemini: add device tree for edimax NS2502 Date: Fri, 18 Jun 2021 20:55:32 +0000 [thread overview] Message-ID: <20210618205533.1527384-5-clabbe@baylibre.com> (raw) Message-ID: <20210618205532.9WY9nNBKp0kn7yrYYp2nGj3NHSnPFD7hACTjaYB9U2s@z> (raw) In-Reply-To: <20210618205533.1527384-1-clabbe@baylibre.com> The edimax NS2502 is a NAS box running a SL3516 SoC. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/gemini-ns2502.dts | 148 ++++++++++++++++++++++++++++ 2 files changed, 149 insertions(+) create mode 100644 arch/arm/boot/dts/gemini-ns2502.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 863347b6b65e..806715f3266d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -217,6 +217,7 @@ dtb-$(CONFIG_ARCH_GEMINI) += \ gemini-dlink-dir-685.dtb \ gemini-dlink-dns-313.dtb \ gemini-nas4220b.dtb \ + gemini-ns2502.dtb \ gemini-rut1xx.dtb \ gemini-sl93512r.dtb \ gemini-sq201.dtb \ diff --git a/arch/arm/boot/dts/gemini-ns2502.dts b/arch/arm/boot/dts/gemini-ns2502.dts new file mode 100644 index 000000000000..704abd212df5 --- /dev/null +++ b/arch/arm/boot/dts/gemini-ns2502.dts @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com> + * Device Tree file for Edimax NS 2502 + */ + +/dts-v1/; + +#include "gemini.dtsi" + +/ { + model = "Edimax NS-2502"; + compatible = "edimax,ns-2502", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + aliases { + mdio-gpio0 = &mdio0; + }; + + chosen { + bootargs = "console=ttyS0,19200n8"; + stdout-path = &uart0; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + /* We lack the knowledge of necessary GPIO to achieve + * Gigabit + */ + max-speed = <100>; + }; + }; +}; + +ðernet { + status = "okay"; + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; +}; + +&flash { + status = "okay"; + /* 8MB of flash */ + reg = <0x30000000 0x00800000>; + + pinctrl-names = "enabled", "disabled"; + pinctrl-0 = <&pflash_default_pins>; + pinctrl-1 = <&pflash_disabled_pins>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x00020000>; + }; + partition@20000 { + label = "kernel"; + reg = <0x00020000 0x00700000>; + }; + partition@720000 { + label = "VCTL"; + reg = <0x00720000 0x00020000>; + }; + partition@740000 { + label = "CurConf"; + reg = <0x00740000 0x000a0000>; + }; + partition@7e0000 { + label = "FIS"; + reg = <0x007e0000 0x00010000>; + }; + }; +}; + +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; +}; + +&ide0 { + status = "okay"; +}; + +&ide1 { + status = "okay"; +}; + +&sata { + cortina,gemini-ata-muxmode = <3>; + cortina,gemini-enable-sata-bridge; + status = "okay"; +}; + +&syscon { + pinctrl { + /* + * gpio0agrp cover line 0-4 + * gpio0bgrp cover line 5 + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0agrp", "gpio0bgrp", "gpio0hgrp"; + }; + }; + pflash_disabled_pins: pinctrl-pflash-disabled { + mux { + function = "gpio0"; + groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp", + "gpio0kgrp"; + }; + }; + pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmii_gmac0_grp"; + }; + }; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; -- 2.31.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-06-18 20:55 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-18 20:55 [PATCH v2 0/5] ARM: gemini: add two more board Corentin Labbe 2021-06-18 20:55 ` Corentin Labbe 2021-06-18 20:55 ` [PATCH v2 1/5] ARM: dts: gemini: add labels for USB, IDE, flash and ethernet Corentin Labbe 2021-06-18 20:55 ` Corentin Labbe 2021-06-18 20:55 ` [PATCH v2 2/5] dt-bindings: add vendor prefix for edimax Corentin Labbe 2021-06-18 20:55 ` Corentin Labbe 2021-07-12 20:11 ` Rob Herring 2021-07-12 20:11 ` Rob Herring 2021-06-18 20:55 ` [PATCH v2 3/5] dt-bindings: add vendor prefix for ssi Corentin Labbe 2021-06-18 20:55 ` Corentin Labbe 2021-07-12 20:11 ` Rob Herring 2021-07-12 20:11 ` Rob Herring 2021-06-18 20:55 ` Corentin Labbe [this message] 2021-06-18 20:55 ` [PATCH v2 4/5] ARM: gemini: add device tree for edimax NS2502 Corentin Labbe 2021-06-18 20:55 ` [PATCH v2 5/5] ARM: gemini: add device tree for ssi1328 Corentin Labbe 2021-06-18 20:55 ` Corentin Labbe 2021-07-12 20:11 ` Rob Herring 2021-07-12 20:11 ` Rob Herring 2021-07-23 10:38 ` Linus Walleij 2021-07-23 10:38 ` Linus Walleij 2021-07-23 10:38 ` Linus Walleij 2021-07-23 10:34 ` [PATCH v2 0/5] ARM: gemini: add two more board Linus Walleij 2021-07-23 10:34 ` Linus Walleij 2021-07-23 10:34 ` Linus Walleij
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210618205533.1527384-5-clabbe@baylibre.com \ --to=clabbe@baylibre.com \ --cc=arnd@arndb.de \ --cc=devicetree@vger.kernel.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=olof@lixom.net \ --cc=robh+dt@kernel.org \ --cc=soc@kernel.org \ --cc=ulli.kroll@googlemail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).