From: Giulio Benetti <giulio.benetti@benettiengineering.com>
To: Jesse Taube <mr.bossman075@gmail.com>,
Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Sascha Hauer <kernel@pengutronix.de>,
Ulf Hansson <ulf.hansson@linaro.org>,
Dong Aisheng <aisheng.dong@nxp.com>,
Stefan Agner <stefan@agner.ch>,
Linus Walleij <linus.walleij@linaro.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
soc@kernel.org, Russell King - ARM Linux <linux@armlinux.org.uk>,
Abel Vesa <abel.vesa@nxp.com>,
Adrian Hunter <adrian.hunter@intel.com>,
Jiri Slaby <jirislaby@kernel.org>,
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>,
linux-clk <linux-clk@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@lists.infradead.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
linux-mmc <linux-mmc@vger.kernel.org>,
"open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
linux-serial@vger.kernel.org
Subject: Re: [PATCH v2 11/13] mmc: sdhci-esdhc-imx: Add sdhc support for i.MXRT series
Date: Wed, 3 Nov 2021 00:30:17 +0100 [thread overview]
Message-ID: <5ebe48f5-7b9c-be99-d50c-65a056084b96@benettiengineering.com> (raw)
Message-ID: <20211102233017.bvZyNHgwkuFX2SrymY1886iySuCFjH3IP1hlSc3HduY@z> (raw)
In-Reply-To: <c1610093-95ae-68d3-57ae-93b1bc9715d7@gmail.com>
Hi Fabio, Jesse, All,
On 11/3/21 12:25 AM, Jesse Taube wrote:
>
>
> On 11/2/21 19:17, Fabio Estevam wrote:
>> On Tue, Nov 2, 2021 at 7:57 PM Jesse Taube <mr.bossman075@gmail.com> wrote:
>>
>>> static struct esdhc_soc_data usdhc_imx8qxp_data = {
>>> .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
>>> @@ -357,6 +363,7 @@ static const struct of_device_id imx_esdhc_dt_ids[] = {
>>> { .compatible = "fsl,imx7ulp-usdhc", .data = &usdhc_imx7ulp_data, },
>>> { .compatible = "fsl,imx8qxp-usdhc", .data = &usdhc_imx8qxp_data, },
>>> { .compatible = "fsl,imx8mm-usdhc", .data = &usdhc_imx8mm_data, },
>>> + { .compatible = "fsl,imxrt-usdhc", .data = &usdhc_imxrt_data, },
>>
>> I thought Rob suggested to use the SoC name, so this would be:
>>
> Uh i think that may have been for the UART.
>> { .compatible = "fsl,imxrt1050-usdhc", .data = &usdhc_imxrt1050_data, },
>>
>> The same applies to the other bindings in the series.
>>
>> This way it would be possible to differentiate between future
>> supported i.MX RT devices.
>>
> This makes sense will do in V3.
>
If we add every SoC we will end up having a long list for every device
driver. At the moment it would be 7 parts:
1) imxrt1020
2) imxrt1024
.
.
.
7) imxrt1170
Is it ok anyway?
Best regards
--
Giulio Benetti
Benetti Engineering sas
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-11-02 23:31 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-02 22:56 [PATCH v2 00/13] Add initial support for the i.MXRTxxxx SoC family starting from i.IMXRT1050 SoC Jesse Taube
2021-11-02 22:56 ` Jesse Taube
2021-11-02 22:56 ` [PATCH v2 01/13] ARM: imx: add initial support for i.MXRT10xx family Jesse Taube
2021-11-02 22:56 ` Jesse Taube
2021-11-02 22:56 ` [PATCH v2 02/13] dt-bindings: pinctrl: add i.MXRT1050 pinctrl binding doc Jesse Taube
2021-11-02 22:56 ` Jesse Taube
2021-11-03 1:20 ` Rob Herring
2021-11-03 1:20 ` Rob Herring
2021-11-03 1:38 ` Jesse Taube
2021-11-03 1:38 ` Jesse Taube
2021-11-09 1:07 ` Linus Walleij
2021-11-09 1:07 ` Linus Walleij
2021-11-09 2:59 ` Jesse Taube
2021-11-09 2:59 ` Jesse Taube
2021-11-02 22:56 ` [PATCH v2 03/13] ARM: dts: imxrt1050-pinfunc: Add pinctrl binding header Jesse Taube
2021-11-02 22:56 ` Jesse Taube
2021-11-02 22:56 ` [PATCH v2 04/13] pinctrl: freescale: Add i.MXRT1050 pinctrl driver support Jesse Taube
2021-11-02 22:56 ` Jesse Taube
2021-11-02 22:56 ` [PATCH v2 05/13] dt-bindings: clock: imx: Add documentation for i.MXRT clock Jesse Taube
2021-11-02 22:56 ` Jesse Taube
2021-11-08 17:06 ` Rob Herring
2021-11-08 17:06 ` Rob Herring
2021-11-03 1:20 ` Rob Herring
2021-11-03 1:20 ` Rob Herring
2021-11-02 22:56 ` [PATCH v2 06/13] dt-bindings: imx: Add clock binding for i.MXRT1050 Jesse Taube
2021-11-02 22:56 ` Jesse Taube
2021-11-02 22:56 ` [PATCH v2 07/13] clk: imx: Add initial support for i.MXRT clock driver Jesse Taube
2021-11-02 22:56 ` Jesse Taube
2021-11-02 23:34 ` Fabio Estevam
2021-11-02 23:34 ` Fabio Estevam
2021-11-02 23:34 ` Fabio Estevam
2021-11-02 23:38 ` Jesse Taube
2021-11-02 23:38 ` Jesse Taube
2021-11-02 23:38 ` Jesse Taube
2021-11-05 9:42 ` Giulio Benetti
2021-11-05 9:42 ` Giulio Benetti
2021-11-02 22:56 ` [PATCH v2 08/13] dt-bindings: serial: fsl-lpuart: add i.MXRT compatible Jesse Taube
2021-11-02 22:56 ` Jesse Taube
2021-11-02 22:56 ` [PATCH v2 09/13] tty: serial: fsl_lpuart: add i.MXRT support Jesse Taube
2021-11-02 22:56 ` Jesse Taube
2021-11-02 22:56 ` [PATCH v2 10/13] dt-bindings: mmc: fsl-imx-esdhc: add i.MXRT compatible string Jesse Taube
2021-11-02 22:56 ` Jesse Taube
2021-11-02 22:56 ` [PATCH v2 11/13] mmc: sdhci-esdhc-imx: Add sdhc support for i.MXRT series Jesse Taube
2021-11-02 22:56 ` Jesse Taube
2021-11-02 23:02 ` Giulio Benetti
2021-11-02 23:02 ` Giulio Benetti
2021-11-02 23:17 ` Fabio Estevam
2021-11-02 23:17 ` Fabio Estevam
2021-11-02 23:17 ` Fabio Estevam
2021-11-02 23:25 ` Jesse Taube
2021-11-02 23:25 ` Jesse Taube
2021-11-02 23:25 ` Jesse Taube
2021-11-02 23:30 ` Giulio Benetti [this message]
2021-11-02 23:30 ` Giulio Benetti
2021-11-04 1:05 ` Rob Herring
2021-11-04 1:05 ` Rob Herring
2021-11-04 1:05 ` Rob Herring
2021-11-04 2:30 ` Giulio Benetti
2021-11-04 2:30 ` Giulio Benetti
2021-11-04 2:30 ` Giulio Benetti
2021-11-02 23:30 ` Giulio Benetti
2021-11-03 17:51 ` Fabio Estevam
2021-11-03 17:51 ` Fabio Estevam
2021-11-03 17:51 ` Fabio Estevam
2021-11-03 19:10 ` Giulio Benetti
2021-11-03 19:10 ` Giulio Benetti
2021-11-03 19:10 ` Giulio Benetti
2021-11-03 2:19 ` Bough Chen
2021-11-03 2:19 ` Bough Chen
2021-11-03 2:19 ` Bough Chen
2021-11-23 3:13 ` Jesse Taube
2021-11-23 4:31 ` Bough Chen
2021-11-02 22:57 ` [PATCH v2 12/13] ARM: dts: imx: add i.MXRT1050-EVK support Jesse Taube
2021-11-02 22:57 ` Jesse Taube
2021-11-02 23:42 ` Fabio Estevam
2021-11-02 23:42 ` Fabio Estevam
2021-11-02 23:42 ` Fabio Estevam
2021-11-02 23:54 ` Jesse Taube
2021-11-02 23:54 ` Jesse Taube
2021-11-02 23:54 ` Jesse Taube
2021-11-03 2:19 ` Jesse Taube
2021-11-03 2:19 ` Jesse Taube
2021-11-03 2:19 ` Jesse Taube
2021-11-02 22:57 ` [PATCH v2 13/13] ARM: imxrt_defconfig: add i.MXRT family defconfig Jesse Taube
2021-11-02 22:57 ` Jesse Taube
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5ebe48f5-7b9c-be99-d50c-65a056084b96@benettiengineering.com \
--to=giulio.benetti@benettiengineering.com \
--cc=abel.vesa@nxp.com \
--cc=adrian.hunter@intel.com \
--cc=aisheng.dong@nxp.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=kernel@pengutronix.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mr.bossman075@gmail.com \
--cc=mturquette@baylibre.com \
--cc=nobuhiro1.iwamatsu@toshiba.co.jp \
--cc=olof@lixom.net \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
--cc=soc@kernel.org \
--cc=stefan@agner.ch \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).