[PATCH 5.4 00/50] 5.4.149-rc1 review

[PATCH 5.4 00/50] 5.4.149-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.149 release.
There are 50 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun, 26 Sep 2021 12:43:20 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.149-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.149-rc1

Guenter Roeck <linux@roeck-us.net>
    drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV

Yu-Tung Chang <mtwget@gmail.com>
    rtc: rx8010: select REGMAP_I2C

Li Jinlin <lijinlin3@huawei.com>
    blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    pwm: stm32-lp: Don't modify HW state in .remove() callback

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    pwm: rockchip: Don't modify HW state in .remove() callback

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    pwm: img: Don't modify HW state in .remove() callback

Nanyong Sun <sunnanyong@huawei.com>
    nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group

Nanyong Sun <sunnanyong@huawei.com>
    nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group

Nanyong Sun <sunnanyong@huawei.com>
    nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group

Nanyong Sun <sunnanyong@huawei.com>
    nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group

Nanyong Sun <sunnanyong@huawei.com>
    nilfs2: fix NULL pointer in nilfs_##name##_attr_release

Nanyong Sun <sunnanyong@huawei.com>
    nilfs2: fix memory leak in nilfs_sysfs_create_device_group

Anand Jain <anand.jain@oracle.com>
    btrfs: fix lockdep warning while mounting sprout fs

Jeff Layton <jlayton@kernel.org>
    ceph: lockdep annotations for try_nonblocking_invalidate

Jeff Layton <jlayton@kernel.org>
    ceph: request Fw caps before updating the mtime in ceph_write_iter

Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
    dmaengine: xilinx_dma: Set DMA mask for coherent APIs

Johannes Berg <johannes.berg@intel.com>
    dmaengine: ioat: depends on !UML

Zou Wei <zou_wei@huawei.com>
    dmaengine: sprd: Add missing MODULE_DEVICE_TABLE

Guenter Roeck <linux@roeck-us.net>
    parisc: Move pci_dev_is_behind_card_dino to where it is used

Thomas Gleixner <tglx@linutronix.de>
    drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()

Arnd Bergmann <arnd@arndb.de>
    thermal/core: Fix thermal_cooling_device_register() prototype

Lukas Bulwahn <lukas.bulwahn@gmail.com>
    Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH

Jongsung Kim <neidhard.kim@lge.com>
    net: stmmac: reset Tx desc base address before restarting Tx

Petr Oros <poros@redhat.com>
    phy: avoid unnecessary link-up delay in polling mode

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    pwm: mxs: Don't modify HW state in .probe() after the PWM chip was registered

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was registered

Pavel Skripkin <paskripkin@gmail.com>
    profiling: fix shift-out-of-bounds bugs

Zhen Lei <thunder.leizhen@huawei.com>
    nilfs2: use refcount_dec_and_lock() to fix potential UAF

Cyrill Gorcunov <gorcunov@gmail.com>
    prctl: allow to setup brk for et_dyn executables

Xie Yongji <xieyongji@bytedance.com>
    9p/trans_virtio: Remove sysfs file on probe failure

Dan Carpenter <dan.carpenter@oracle.com>
    thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    dmaengine: acpi: Avoid comparison GSI with Linux vIRQ

Johannes Berg <johannes.berg@intel.com>
    um: virtio_uml: fix memory leak on init failures

Nathan Chancellor <nathan@kernel.org>
    staging: rtl8192u: Fix bitwise vs logical operator in TranslateRxSignalStuff819xUsb()

Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
    sctp: add param size validation for SCTP_PARAM_SET_PRIMARY

Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
    sctp: validate chunk size in __rcv_asconf_lookup

Alex Sverdlin <alexander.sverdlin@nokia.com>
    ARM: 9098/1: ftrace: MODULE_PLT: Fix build problem without DYNAMIC_FTRACE

Alex Sverdlin <alexander.sverdlin@nokia.com>
    ARM: 9079/1: ftrace: Add MODULE_PLTS support

Alex Sverdlin <alexander.sverdlin@nokia.com>
    ARM: 9078/1: Add warn suppress parameter to arm_gen_branch_link()

Alex Sverdlin <alexander.sverdlin@nokia.com>
    ARM: 9077/1: PLT: Move struct plt_entries definition to header

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    apparmor: remove duplicate macro list_entry_is_head()

Florian Fainelli <f.fainelli@gmail.com>
    ARM: Qualify enabling of swiotlb_init()

David Hildenbrand <david@redhat.com>
    s390/pci_mmio: fully validate the VMA before calling follow_pte()

nick black <dankamongmen@gmail.com>
    console: consume APC, DM, DCS

Radim Krčmář <rkrcmar@redhat.com>
    KVM: remember position in kvm->vcpus array

Tuan Phan <tuanphan@os.amperecomputing.com>
    PCI/ACPI: Add Ampere Altra SOC MCFG quirk

Pali Rohár <pali@kernel.org>
    PCI: aardvark: Fix reporting CRS value

Pali Rohár <pali@kernel.org>
    PCI: pci-bridge-emul: Add PCIe Root Capabilities Register

Pali Rohár <pali@kernel.org>
    PCI: aardvark: Indicate error in 'val' when config read fails

Grzegorz Jaszczyk <jaz@semihalf.com>
    PCI: pci-bridge-emul: Fix big-endian support


-------------

Diffstat:

 Makefile                                          |  4 +-
 arch/arm/include/asm/ftrace.h                     |  3 +
 arch/arm/include/asm/insn.h                       |  8 +--
 arch/arm/include/asm/module.h                     | 10 +++
 arch/arm/kernel/ftrace.c                          | 46 ++++++++++---
 arch/arm/kernel/insn.c                            | 19 +++---
 arch/arm/kernel/module-plts.c                     | 49 ++++++++++----
 arch/arm/mm/init.c                                |  6 +-
 arch/arm64/kernel/cacheinfo.c                     |  7 +-
 arch/mips/kernel/cacheinfo.c                      |  7 +-
 arch/riscv/kernel/cacheinfo.c                     |  7 +-
 arch/s390/pci/pci_mmio.c                          |  2 +-
 arch/um/drivers/virtio_uml.c                      |  4 +-
 arch/x86/kernel/cpu/cacheinfo.c                   |  7 +-
 block/blk-throttle.c                              |  1 +
 drivers/acpi/pci_mcfg.c                           | 20 ++++++
 drivers/dma/Kconfig                               |  2 +-
 drivers/dma/acpi-dma.c                            | 10 ++-
 drivers/dma/sprd-dma.c                            |  1 +
 drivers/dma/xilinx/xilinx_dma.c                   |  2 +-
 drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c |  2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |  2 +
 drivers/net/phy/phy-c45.c                         |  5 +-
 drivers/net/phy/phy_device.c                      |  5 +-
 drivers/parisc/dino.c                             | 18 +++---
 drivers/pci/controller/pci-aardvark.c             | 71 +++++++++++++++++++--
 drivers/pci/ecam.c                                | 10 +++
 drivers/pci/pci-bridge-emul.c                     | 25 ++++----
 drivers/pci/pci-bridge-emul.h                     | 78 +++++++++++------------
 drivers/pwm/pwm-img.c                             | 16 -----
 drivers/pwm/pwm-lpc32xx.c                         | 10 +--
 drivers/pwm/pwm-mxs.c                             | 13 ++--
 drivers/pwm/pwm-rockchip.c                        | 14 ----
 drivers/pwm/pwm-stm32-lp.c                        |  2 -
 drivers/rtc/Kconfig                               |  1 +
 drivers/staging/rtl8192u/r8192U_core.c            |  2 +-
 drivers/thermal/samsung/exynos_tmu.c              |  1 +
 drivers/tty/vt/vt.c                               | 31 +++++++--
 fs/btrfs/volumes.c                                |  7 +-
 fs/ceph/caps.c                                    |  2 +
 fs/ceph/file.c                                    | 32 +++++-----
 fs/nilfs2/sysfs.c                                 | 26 ++++----
 fs/nilfs2/the_nilfs.c                             |  9 ++-
 include/linux/cacheinfo.h                         | 18 ------
 include/linux/kvm_host.h                          | 11 +---
 include/linux/pci-ecam.h                          |  1 +
 include/linux/thermal.h                           |  5 +-
 kernel/profile.c                                  | 21 +++---
 kernel/sys.c                                      |  7 --
 lib/Kconfig.debug                                 |  1 -
 net/9p/trans_virtio.c                             |  4 +-
 net/sctp/input.c                                  |  3 +
 net/sctp/sm_make_chunk.c                          | 13 +++-
 security/apparmor/apparmorfs.c                    |  3 -
 virt/kvm/kvm_main.c                               |  5 +-
 55 files changed, 414 insertions(+), 275 deletions(-)

[PATCH 5.4 01/50] PCI: pci-bridge-emul: Fix big-endian support

[Greg Kroah-Hartman]

From: Grzegorz Jaszczyk <jaz@semihalf.com>

commit e0d9d30b73548fbfe5c024ed630169bdc9a08aee upstream.

Perform conversion to little-endian before every write to configuration
space and convert it back to CPU endianness on reads.

Additionally, initialise every multiple byte field of config space with
the cpu_to_le* macro, which is required since the structure describing
config space of emulated bridge assumes little-endian convention.

Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/pci-bridge-emul.c |   25 +++++++------
 drivers/pci/pci-bridge-emul.h |   78 +++++++++++++++++++++---------------------
 2 files changed, 52 insertions(+), 51 deletions(-)

--- a/drivers/pci/pci-bridge-emul.c
+++ b/drivers/pci/pci-bridge-emul.c
@@ -270,10 +270,10 @@ static const struct pci_bridge_reg_behav
 int pci_bridge_emul_init(struct pci_bridge_emul *bridge,
 			 unsigned int flags)
 {
-	bridge->conf.class_revision |= PCI_CLASS_BRIDGE_PCI << 16;
+	bridge->conf.class_revision |= cpu_to_le32(PCI_CLASS_BRIDGE_PCI << 16);
 	bridge->conf.header_type = PCI_HEADER_TYPE_BRIDGE;
 	bridge->conf.cache_line_size = 0x10;
-	bridge->conf.status = PCI_STATUS_CAP_LIST;
+	bridge->conf.status = cpu_to_le16(PCI_STATUS_CAP_LIST);
 	bridge->pci_regs_behavior = kmemdup(pci_regs_behavior,
 					    sizeof(pci_regs_behavior),
 					    GFP_KERNEL);
@@ -284,8 +284,9 @@ int pci_bridge_emul_init(struct pci_brid
 		bridge->conf.capabilities_pointer = PCI_CAP_PCIE_START;
 		bridge->pcie_conf.cap_id = PCI_CAP_ID_EXP;
 		/* Set PCIe v2, root port, slot support */
-		bridge->pcie_conf.cap = PCI_EXP_TYPE_ROOT_PORT << 4 | 2 |
-			PCI_EXP_FLAGS_SLOT;
+		bridge->pcie_conf.cap =
+			cpu_to_le16(PCI_EXP_TYPE_ROOT_PORT << 4 | 2 |
+				    PCI_EXP_FLAGS_SLOT);
 		bridge->pcie_cap_regs_behavior =
 			kmemdup(pcie_cap_regs_behavior,
 				sizeof(pcie_cap_regs_behavior),
@@ -327,7 +328,7 @@ int pci_bridge_emul_conf_read(struct pci
 	int reg = where & ~3;
 	pci_bridge_emul_read_status_t (*read_op)(struct pci_bridge_emul *bridge,
 						 int reg, u32 *value);
-	u32 *cfgspace;
+	__le32 *cfgspace;
 	const struct pci_bridge_reg_behavior *behavior;
 
 	if (bridge->has_pcie && reg >= PCI_CAP_PCIE_END) {
@@ -343,11 +344,11 @@ int pci_bridge_emul_conf_read(struct pci
 	if (bridge->has_pcie && reg >= PCI_CAP_PCIE_START) {
 		reg -= PCI_CAP_PCIE_START;
 		read_op = bridge->ops->read_pcie;
-		cfgspace = (u32 *) &bridge->pcie_conf;
+		cfgspace = (__le32 *) &bridge->pcie_conf;
 		behavior = bridge->pcie_cap_regs_behavior;
 	} else {
 		read_op = bridge->ops->read_base;
-		cfgspace = (u32 *) &bridge->conf;
+		cfgspace = (__le32 *) &bridge->conf;
 		behavior = bridge->pci_regs_behavior;
 	}
 
@@ -357,7 +358,7 @@ int pci_bridge_emul_conf_read(struct pci
 		ret = PCI_BRIDGE_EMUL_NOT_HANDLED;
 
 	if (ret == PCI_BRIDGE_EMUL_NOT_HANDLED)
-		*value = cfgspace[reg / 4];
+		*value = le32_to_cpu(cfgspace[reg / 4]);
 
 	/*
 	 * Make sure we never return any reserved bit with a value
@@ -387,7 +388,7 @@ int pci_bridge_emul_conf_write(struct pc
 	int mask, ret, old, new, shift;
 	void (*write_op)(struct pci_bridge_emul *bridge, int reg,
 			 u32 old, u32 new, u32 mask);
-	u32 *cfgspace;
+	__le32 *cfgspace;
 	const struct pci_bridge_reg_behavior *behavior;
 
 	if (bridge->has_pcie && reg >= PCI_CAP_PCIE_END)
@@ -414,11 +415,11 @@ int pci_bridge_emul_conf_write(struct pc
 	if (bridge->has_pcie && reg >= PCI_CAP_PCIE_START) {
 		reg -= PCI_CAP_PCIE_START;
 		write_op = bridge->ops->write_pcie;
-		cfgspace = (u32 *) &bridge->pcie_conf;
+		cfgspace = (__le32 *) &bridge->pcie_conf;
 		behavior = bridge->pcie_cap_regs_behavior;
 	} else {
 		write_op = bridge->ops->write_base;
-		cfgspace = (u32 *) &bridge->conf;
+		cfgspace = (__le32 *) &bridge->conf;
 		behavior = bridge->pci_regs_behavior;
 	}
 
@@ -431,7 +432,7 @@ int pci_bridge_emul_conf_write(struct pc
 	/* Clear the W1C bits */
 	new &= ~((value << shift) & (behavior[reg / 4].w1c & mask));
 
-	cfgspace[reg / 4] = new;
+	cfgspace[reg / 4] = cpu_to_le32(new);
 
 	if (write_op)
 		write_op(bridge, reg, old, new, mask);
--- a/drivers/pci/pci-bridge-emul.h
+++ b/drivers/pci/pci-bridge-emul.h
@@ -6,65 +6,65 @@
 
 /* PCI configuration space of a PCI-to-PCI bridge. */
 struct pci_bridge_emul_conf {
-	u16 vendor;
-	u16 device;
-	u16 command;
-	u16 status;
-	u32 class_revision;
+	__le16 vendor;
+	__le16 device;
+	__le16 command;
+	__le16 status;
+	__le32 class_revision;
 	u8 cache_line_size;
 	u8 latency_timer;
 	u8 header_type;
 	u8 bist;
-	u32 bar[2];
+	__le32 bar[2];
 	u8 primary_bus;
 	u8 secondary_bus;
 	u8 subordinate_bus;
 	u8 secondary_latency_timer;
 	u8 iobase;
 	u8 iolimit;
-	u16 secondary_status;
-	u16 membase;
-	u16 memlimit;
-	u16 pref_mem_base;
-	u16 pref_mem_limit;
-	u32 prefbaseupper;
-	u32 preflimitupper;
-	u16 iobaseupper;
-	u16 iolimitupper;
+	__le16 secondary_status;
+	__le16 membase;
+	__le16 memlimit;
+	__le16 pref_mem_base;
+	__le16 pref_mem_limit;
+	__le32 prefbaseupper;
+	__le32 preflimitupper;
+	__le16 iobaseupper;
+	__le16 iolimitupper;
 	u8 capabilities_pointer;
 	u8 reserve[3];
-	u32 romaddr;
+	__le32 romaddr;
 	u8 intline;
 	u8 intpin;
-	u16 bridgectrl;
+	__le16 bridgectrl;
 };
 
 /* PCI configuration space of the PCIe capabilities */
 struct pci_bridge_emul_pcie_conf {
 	u8 cap_id;
 	u8 next;
-	u16 cap;
-	u32 devcap;
-	u16 devctl;
-	u16 devsta;
-	u32 lnkcap;
-	u16 lnkctl;
-	u16 lnksta;
-	u32 slotcap;
-	u16 slotctl;
-	u16 slotsta;
-	u16 rootctl;
-	u16 rsvd;
-	u32 rootsta;
-	u32 devcap2;
-	u16 devctl2;
-	u16 devsta2;
-	u32 lnkcap2;
-	u16 lnkctl2;
-	u16 lnksta2;
-	u32 slotcap2;
-	u16 slotctl2;
-	u16 slotsta2;
+	__le16 cap;
+	__le32 devcap;
+	__le16 devctl;
+	__le16 devsta;
+	__le32 lnkcap;
+	__le16 lnkctl;
+	__le16 lnksta;
+	__le32 slotcap;
+	__le16 slotctl;
+	__le16 slotsta;
+	__le16 rootctl;
+	__le16 rsvd;
+	__le32 rootsta;
+	__le32 devcap2;
+	__le16 devctl2;
+	__le16 devsta2;
+	__le32 lnkcap2;
+	__le16 lnkctl2;
+	__le16 lnksta2;
+	__le32 slotcap2;
+	__le16 slotctl2;
+	__le16 slotsta2;
 };
 
 struct pci_bridge_emul;

[PATCH 5.4 02/50] PCI: aardvark: Indicate error in val when config read fails

[Greg Kroah-Hartman]

From: Pali Rohár <pali@kernel.org>

commit b1bd5714472cc72e14409f5659b154c765a76c65 upstream.

Most callers of config read do not check for return value. But most of the
ones that do, checks for error indication in 'val' variable.

This patch updates error handling in advk_pcie_rd_conf() function. If PIO
transfer fails then 'val' variable is set to 0xffffffff which indicates
failture.

Link: https://lore.kernel.org/r/20200528162604.GA323482@bjorn-Precision-5520
Link: https://lore.kernel.org/r/20200601130315.18895-1-pali@kernel.org
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/controller/pci-aardvark.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -664,8 +664,10 @@ static int advk_pcie_rd_conf(struct pci_
 	advk_writel(pcie, 1, PIO_START);
 
 	ret = advk_pcie_wait_pio(pcie);
-	if (ret < 0)
+	if (ret < 0) {
+		*val = 0xffffffff;
 		return PCIBIOS_SET_FAILED;
+	}
 
 	/* Check PIO status and get the read result */
 	ret = advk_pcie_check_pio_status(pcie, val);

[PATCH 5.4 03/50] PCI: pci-bridge-emul: Add PCIe Root Capabilities Register

[Greg Kroah-Hartman]

From: Pali Rohár <pali@kernel.org>

commit e902bb7c24a7099d0eb0eb4cba06f2d91e9299f3 upstream.

The 16-bit Root Capabilities register is at offset 0x1e in the PCIe
Capability. Rename current 'rsvd' struct member to 'rootcap'.

Link: https://lore.kernel.org/r/20210722144041.12661-4-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/pci-bridge-emul.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/pci/pci-bridge-emul.h
+++ b/drivers/pci/pci-bridge-emul.h
@@ -54,7 +54,7 @@ struct pci_bridge_emul_pcie_conf {
 	__le16 slotctl;
 	__le16 slotsta;
 	__le16 rootctl;
-	__le16 rsvd;
+	__le16 rootcap;
 	__le32 rootsta;
 	__le32 devcap2;
 	__le16 devctl2;

[PATCH 5.4 04/50] PCI: aardvark: Fix reporting CRS value

[Greg Kroah-Hartman]

From: Pali Rohár <pali@kernel.org>

commit 43f5c77bcbd27cce70bf33c2b86d6726ce95dd66 upstream.

Set CRSVIS flag in emulated root PCI bridge to indicate support for
Completion Retry Status.

Add check for CRSSVE flag from root PCI brige when issuing Configuration
Read Request via PIO to correctly returns fabricated CRS value as it is
required by PCIe spec.

Link: https://lore.kernel.org/r/20210722144041.12661-5-pali@kernel.org
Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # e0d9d30b7354 ("PCI: pci-bridge-emul: Fix big-endian support")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/controller/pci-aardvark.c |   67 +++++++++++++++++++++++++++++++---
 1 file changed, 63 insertions(+), 4 deletions(-)

--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -188,6 +188,8 @@
 
 #define MSI_IRQ_NUM			32
 
+#define CFG_RD_CRS_VAL			0xffff0001
+
 struct advk_pcie {
 	struct platform_device *pdev;
 	void __iomem *base;
@@ -365,7 +367,7 @@ static void advk_pcie_setup_hw(struct ad
 	advk_writel(pcie, reg, PCIE_CORE_CMD_STATUS_REG);
 }
 
-static int advk_pcie_check_pio_status(struct advk_pcie *pcie, u32 *val)
+static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u32 *val)
 {
 	struct device *dev = &pcie->pdev->dev;
 	u32 reg;
@@ -407,9 +409,30 @@ static int advk_pcie_check_pio_status(st
 		strcomp_status = "UR";
 		break;
 	case PIO_COMPLETION_STATUS_CRS:
+		if (allow_crs && val) {
+			/* PCIe r4.0, sec 2.3.2, says:
+			 * If CRS Software Visibility is enabled:
+			 * For a Configuration Read Request that includes both
+			 * bytes of the Vendor ID field of a device Function's
+			 * Configuration Space Header, the Root Complex must
+			 * complete the Request to the host by returning a
+			 * read-data value of 0001h for the Vendor ID field and
+			 * all '1's for any additional bytes included in the
+			 * request.
+			 *
+			 * So CRS in this case is not an error status.
+			 */
+			*val = CFG_RD_CRS_VAL;
+			strcomp_status = NULL;
+			break;
+		}
 		/* PCIe r4.0, sec 2.3.2, says:
 		 * If CRS Software Visibility is not enabled, the Root Complex
 		 * must re-issue the Configuration Request as a new Request.
+		 * If CRS Software Visibility is enabled: For a Configuration
+		 * Write Request or for any other Configuration Read Request,
+		 * the Root Complex must re-issue the Configuration Request as
+		 * a new Request.
 		 * A Root Complex implementation may choose to limit the number
 		 * of Configuration Request/CRS Completion Status loops before
 		 * determining that something is wrong with the target of the
@@ -478,6 +501,7 @@ advk_pci_bridge_emul_pcie_conf_read(stru
 	case PCI_EXP_RTCTL: {
 		u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG);
 		*value = (val & PCIE_MSG_PM_PME_MASK) ? 0 : PCI_EXP_RTCTL_PMEIE;
+		*value |= PCI_EXP_RTCAP_CRSVIS << 16;
 		return PCI_BRIDGE_EMUL_HANDLED;
 	}
 
@@ -559,6 +583,7 @@ static struct pci_bridge_emul_ops advk_p
 static int advk_sw_pci_bridge_init(struct advk_pcie *pcie)
 {
 	struct pci_bridge_emul *bridge = &pcie->bridge;
+	int ret;
 
 	bridge->conf.vendor = advk_readl(pcie, PCIE_CORE_DEV_ID_REG) & 0xffff;
 	bridge->conf.device = advk_readl(pcie, PCIE_CORE_DEV_ID_REG) >> 16;
@@ -580,7 +605,15 @@ static int advk_sw_pci_bridge_init(struc
 	bridge->data = pcie;
 	bridge->ops = &advk_pci_bridge_emul_ops;
 
-	return pci_bridge_emul_init(bridge, 0);
+	/* PCIe config space can be initialized after pci_bridge_emul_init() */
+	ret = pci_bridge_emul_init(bridge, 0);
+	if (ret < 0)
+		return ret;
+
+	/* Indicates supports for Completion Retry Status */
+	bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS);
+
+	return 0;
 }
 
 static bool advk_pcie_valid_device(struct advk_pcie *pcie, struct pci_bus *bus,
@@ -625,6 +658,7 @@ static int advk_pcie_rd_conf(struct pci_
 			     int where, int size, u32 *val)
 {
 	struct advk_pcie *pcie = bus->sysdata;
+	bool allow_crs;
 	u32 reg;
 	int ret;
 
@@ -637,7 +671,24 @@ static int advk_pcie_rd_conf(struct pci_
 		return pci_bridge_emul_conf_read(&pcie->bridge, where,
 						 size, val);
 
+	/*
+	 * Completion Retry Status is possible to return only when reading all
+	 * 4 bytes from PCI_VENDOR_ID and PCI_DEVICE_ID registers at once and
+	 * CRSSVE flag on Root Bridge is enabled.
+	 */
+	allow_crs = (where == PCI_VENDOR_ID) && (size == 4) &&
+		    (le16_to_cpu(pcie->bridge.pcie_conf.rootctl) &
+		     PCI_EXP_RTCTL_CRSSVE);
+
 	if (advk_pcie_pio_is_running(pcie)) {
+		/*
+		 * If it is possible return Completion Retry Status so caller
+		 * tries to issue the request again instead of failing.
+		 */
+		if (allow_crs) {
+			*val = CFG_RD_CRS_VAL;
+			return PCIBIOS_SUCCESSFUL;
+		}
 		*val = 0xffffffff;
 		return PCIBIOS_SET_FAILED;
 	}
@@ -665,12 +716,20 @@ static int advk_pcie_rd_conf(struct pci_
 
 	ret = advk_pcie_wait_pio(pcie);
 	if (ret < 0) {
+		/*
+		 * If it is possible return Completion Retry Status so caller
+		 * tries to issue the request again instead of failing.
+		 */
+		if (allow_crs) {
+			*val = CFG_RD_CRS_VAL;
+			return PCIBIOS_SUCCESSFUL;
+		}
 		*val = 0xffffffff;
 		return PCIBIOS_SET_FAILED;
 	}
 
 	/* Check PIO status and get the read result */
-	ret = advk_pcie_check_pio_status(pcie, val);
+	ret = advk_pcie_check_pio_status(pcie, allow_crs, val);
 	if (ret < 0) {
 		*val = 0xffffffff;
 		return PCIBIOS_SET_FAILED;
@@ -739,7 +798,7 @@ static int advk_pcie_wr_conf(struct pci_
 	if (ret < 0)
 		return PCIBIOS_SET_FAILED;
 
-	ret = advk_pcie_check_pio_status(pcie, NULL);
+	ret = advk_pcie_check_pio_status(pcie, false, NULL);
 	if (ret < 0)
 		return PCIBIOS_SET_FAILED;
 

[PATCH 5.4 05/50] PCI/ACPI: Add Ampere Altra SOC MCFG quirk

[Greg Kroah-Hartman]

From: Tuan Phan <tuanphan@os.amperecomputing.com>

commit 877c1a5f79c6984bbe3f2924234c08e2f4f1acd5 upstream.

Ampere Altra SOC supports only 32-bit ECAM reads.  Add an MCFG quirk for
the platform.

Link: https://lore.kernel.org/r/1596751055-12316-1-git-send-email-tuanphan@os.amperecomputing.com
Signed-off-by: Tuan Phan <tuanphan@os.amperecomputing.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[ dannf: backport drops const qualifier from pci_32b_read_ops for
  consistency with the other quirks that weren't yet constified in v5.4 ]
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/pci_mcfg.c  |   20 ++++++++++++++++++++
 drivers/pci/ecam.c       |   10 ++++++++++
 include/linux/pci-ecam.h |    1 +
 3 files changed, 31 insertions(+)

--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -142,6 +142,26 @@ static struct mcfg_fixup mcfg_quirks[] =
 	XGENE_V2_ECAM_MCFG(4, 0),
 	XGENE_V2_ECAM_MCFG(4, 1),
 	XGENE_V2_ECAM_MCFG(4, 2),
+
+#define ALTRA_ECAM_QUIRK(rev, seg) \
+	{ "Ampere", "Altra   ", rev, seg, MCFG_BUS_ANY, &pci_32b_read_ops }
+
+	ALTRA_ECAM_QUIRK(1, 0),
+	ALTRA_ECAM_QUIRK(1, 1),
+	ALTRA_ECAM_QUIRK(1, 2),
+	ALTRA_ECAM_QUIRK(1, 3),
+	ALTRA_ECAM_QUIRK(1, 4),
+	ALTRA_ECAM_QUIRK(1, 5),
+	ALTRA_ECAM_QUIRK(1, 6),
+	ALTRA_ECAM_QUIRK(1, 7),
+	ALTRA_ECAM_QUIRK(1, 8),
+	ALTRA_ECAM_QUIRK(1, 9),
+	ALTRA_ECAM_QUIRK(1, 10),
+	ALTRA_ECAM_QUIRK(1, 11),
+	ALTRA_ECAM_QUIRK(1, 12),
+	ALTRA_ECAM_QUIRK(1, 13),
+	ALTRA_ECAM_QUIRK(1, 14),
+	ALTRA_ECAM_QUIRK(1, 15),
 };
 
 static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
--- a/drivers/pci/ecam.c
+++ b/drivers/pci/ecam.c
@@ -164,4 +164,14 @@ struct pci_ecam_ops pci_32b_ops = {
 		.write		= pci_generic_config_write32,
 	}
 };
+
+/* ECAM ops for 32-bit read only (non-compliant) */
+struct pci_ecam_ops pci_32b_read_ops = {
+	.bus_shift	= 20,
+	.pci_ops	= {
+		.map_bus	= pci_ecam_map_bus,
+		.read		= pci_generic_config_read32,
+		.write		= pci_generic_config_write,
+	}
+};
 #endif
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -51,6 +51,7 @@ extern struct pci_ecam_ops pci_generic_e
 
 #if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
 extern struct pci_ecam_ops pci_32b_ops;		/* 32-bit accesses only */
+extern struct pci_ecam_ops pci_32b_read_ops; /* 32-bit read only */
 extern struct pci_ecam_ops hisi_pcie_ops;	/* HiSilicon */
 extern struct pci_ecam_ops thunder_pem_ecam_ops; /* Cavium ThunderX 1.x & 2.x */
 extern struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX 1.x */

[PATCH 5.4 06/50] KVM: remember position in kvm->vcpus array

[Greg Kroah-Hartman]

From: Radim Krčmář <rkrcmar@redhat.com>

commit 8750e72a79dda2f665ce17b62049f4d62130d991 upstream.

Fetching an index for any vcpu in kvm->vcpus array by traversing
the entire array everytime is costly.
This patch remembers the position of each vcpu in kvm->vcpus array
by storing it in vcpus_idx under kvm_vcpu structure.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[borntraeger@de.ibm.com]: backport to 4.19 (also fits for 5.4)
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/kvm_host.h |   11 +++--------
 virt/kvm/kvm_main.c      |    5 +++--
 2 files changed, 6 insertions(+), 10 deletions(-)

--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -266,7 +266,8 @@ struct kvm_vcpu {
 	struct preempt_notifier preempt_notifier;
 #endif
 	int cpu;
-	int vcpu_id;
+	int vcpu_id; /* id given by userspace at creation */
+	int vcpu_idx; /* index in kvm->vcpus array */
 	int srcu_idx;
 	int mode;
 	u64 requests;
@@ -571,13 +572,7 @@ static inline struct kvm_vcpu *kvm_get_v
 
 static inline int kvm_vcpu_get_idx(struct kvm_vcpu *vcpu)
 {
-	struct kvm_vcpu *tmp;
-	int idx;
-
-	kvm_for_each_vcpu(idx, tmp, vcpu->kvm)
-		if (tmp == vcpu)
-			return idx;
-	BUG();
+	return vcpu->vcpu_idx;
 }
 
 #define kvm_for_each_memslot(memslot, slots)	\
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -2864,7 +2864,8 @@ static int kvm_vm_ioctl_create_vcpu(stru
 		goto unlock_vcpu_destroy;
 	}
 
-	BUG_ON(kvm->vcpus[atomic_read(&kvm->online_vcpus)]);
+	vcpu->vcpu_idx = atomic_read(&kvm->online_vcpus);
+	BUG_ON(kvm->vcpus[vcpu->vcpu_idx]);
 
 	/* Now it's all set up, let userspace reach it */
 	kvm_get_kvm(kvm);
@@ -2874,7 +2875,7 @@ static int kvm_vm_ioctl_create_vcpu(stru
 		goto unlock_vcpu_destroy;
 	}
 
-	kvm->vcpus[atomic_read(&kvm->online_vcpus)] = vcpu;
+	kvm->vcpus[vcpu->vcpu_idx] = vcpu;
 
 	/*
 	 * Pairs with smp_rmb() in kvm_get_vcpu.  Write kvm->vcpus

[PATCH 5.4 07/50] console: consume APC, DM, DCS

[Greg Kroah-Hartman]

From: nick black <dankamongmen@gmail.com>

commit 3a2b2eb55681158d3e3ef464fbf47574cf0c517c upstream.

The Linux console's VT102 implementation already consumes OSC
("Operating System Command") sequences, probably because that's how
palette changes are transmitted.

In addition to OSC, there are three other major clases of ANSI control
strings: APC ("Application Program Command"), PM ("Privacy Message"),
and DCS ("Device Control String").  They are handled similarly to OSC in
terms of termination.

Source: vt100.net

Add three new enumerated states, one for each of these types.  All three
are handled the same way right now--they simply consume input until
terminated.  I hope to expand upon this firmament in the future.  Add
new predicate ansi_control_string(), returning true for any of these
states.  Replace explicit checks against ESosc with calls to this
function.  Transition to these states appropriately from the escape
initiation (ESesc) state.

This was motivated by the following Notcurses bugs:

 https://github.com/dankamongmen/notcurses/issues/2050
 https://github.com/dankamongmen/notcurses/issues/1828
 https://github.com/dankamongmen/notcurses/issues/2069

where standard VT sequences are not consumed by the Linux console.  It's
not necessary that the Linux console *support* these sequences, but it
ought *consume* these well-specified classes of sequences.

Tested by sending a variety of escape sequences to the console, and
verifying that they still worked, or were now properly consumed.
Verified that the escapes were properly terminated at a generic level.
Verified that the Notcurses tools continued to show expected output on
the Linux console, except now without escape bleedthrough.

Link: https://lore.kernel.org/lkml/YSydL0q8iaUfkphg@schwarzgerat.orthanc/
Signed-off-by: nick black <dankamongmen@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/vt/vt.c |   31 +++++++++++++++++++++++++++----
 1 file changed, 27 insertions(+), 4 deletions(-)

--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -2070,7 +2070,7 @@ static void restore_cur(struct vc_data *
 
 enum { ESnormal, ESesc, ESsquare, ESgetpars, ESfunckey,
 	EShash, ESsetG0, ESsetG1, ESpercent, EScsiignore, ESnonstd,
-	ESpalette, ESosc };
+	ESpalette, ESosc, ESapc, ESpm, ESdcs };
 
 /* console_lock is held (except via vc_init()) */
 static void reset_terminal(struct vc_data *vc, int do_clear)
@@ -2124,20 +2124,28 @@ static void reset_terminal(struct vc_dat
 	    csi_J(vc, 2);
 }
 
+/* is this state an ANSI control string? */
+static bool ansi_control_string(unsigned int state)
+{
+	if (state == ESosc || state == ESapc || state == ESpm || state == ESdcs)
+		return true;
+	return false;
+}
+
 /* console_lock is held */
 static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
 {
 	/*
 	 *  Control characters can be used in the _middle_
-	 *  of an escape sequence.
+	 *  of an escape sequence, aside from ANSI control strings.
 	 */
-	if (vc->vc_state == ESosc && c>=8 && c<=13) /* ... except for OSC */
+	if (ansi_control_string(vc->vc_state) && c >= 8 && c <= 13)
 		return;
 	switch (c) {
 	case 0:
 		return;
 	case 7:
-		if (vc->vc_state == ESosc)
+		if (ansi_control_string(vc->vc_state))
 			vc->vc_state = ESnormal;
 		else if (vc->vc_bell_duration)
 			kd_mksound(vc->vc_bell_pitch, vc->vc_bell_duration);
@@ -2196,6 +2204,12 @@ static void do_con_trol(struct tty_struc
 		case ']':
 			vc->vc_state = ESnonstd;
 			return;
+		case '_':
+			vc->vc_state = ESapc;
+			return;
+		case '^':
+			vc->vc_state = ESpm;
+			return;
 		case '%':
 			vc->vc_state = ESpercent;
 			return;
@@ -2212,6 +2226,9 @@ static void do_con_trol(struct tty_struc
 		case 'H':
 			vc->vc_tab_stop[7 & (vc->vc_x >> 5)] |= (1 << (vc->vc_x & 31));
 			return;
+		case 'P':
+			vc->vc_state = ESdcs;
+			return;
 		case 'Z':
 			respond_ID(tty);
 			return;
@@ -2531,8 +2548,14 @@ static void do_con_trol(struct tty_struc
 			vc->vc_translate = set_translate(vc->vc_G1_charset, vc);
 		vc->vc_state = ESnormal;
 		return;
+	case ESapc:
+		return;
 	case ESosc:
 		return;
+	case ESpm:
+		return;
+	case ESdcs:
+		return;
 	default:
 		vc->vc_state = ESnormal;
 	}

[PATCH 5.4 08/50] s390/pci_mmio: fully validate the VMA before calling follow_pte()

[Greg Kroah-Hartman]

From: David Hildenbrand <david@redhat.com>

commit a8b92b8c1eac8d655a97b1e90f4d83c25d9b9a18 upstream.

We should not walk/touch page tables outside of VMA boundaries when
holding only the mmap sem in read mode. Evil user space can modify the
VMA layout just before this function runs and e.g., trigger races with
page table removal code since commit dd2283f2605e ("mm: mmap: zap pages
with read mmap_sem in munmap").

find_vma() does not check if the address is >= the VMA start address;
use vma_lookup() instead.

Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap")
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/pci/pci_mmio.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/s390/pci/pci_mmio.c
+++ b/arch/s390/pci/pci_mmio.c
@@ -128,7 +128,7 @@ static long get_pfn(unsigned long user_a
 	down_read(&current->mm->mmap_sem);
 	ret = -EINVAL;
 	vma = find_vma(current->mm, user_addr);
-	if (!vma)
+	if (!vma || user_addr < vma->vm_start)
 		goto out;
 	ret = -EACCES;
 	if (!(vma->vm_flags & access))

[PATCH 5.4 09/50] ARM: Qualify enabling of swiotlb_init()

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

commit fcf044891c84e38fc90eb736b818781bccf94e38 upstream.

We do not need a SWIOTLB unless we have DRAM that is addressable beyond
the arm_dma_limit. Compare max_pfn with arm_dma_pfn_limit to determine
whether we do need a SWIOTLB to be initialized.

Fixes: ad3c7b18c5b3 ("arm: use swiotlb for bounce buffering on LPAE configs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mm/init.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -469,7 +469,11 @@ static void __init free_highpages(void)
 void __init mem_init(void)
 {
 #ifdef CONFIG_ARM_LPAE
-	swiotlb_init(1);
+	if (swiotlb_force == SWIOTLB_FORCE ||
+	    max_pfn > arm_dma_pfn_limit)
+		swiotlb_init(1);
+	else
+		swiotlb_force = SWIOTLB_NO_FORCE;
 #endif
 
 	set_max_mapnr(pfn_to_page(max_pfn) - mem_map);

[PATCH 5.4 10/50] apparmor: remove duplicate macro list_entry_is_head()

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

commit 9801ca279ad37f72f71234fa81722afd95a3f997 upstream.

Strangely I hadn't had noticed the existence of the list_entry_is_head()
in apparmor code when added the same one in the list.h.  Luckily it's
fully identical and didn't break builds.  In any case we don't need a
duplicate anymore, thus remove it from apparmor code.

Link: https://lkml.kernel.org/r/20201208100639.88182-1-andriy.shevchenko@linux.intel.com
Fixes: e130816164e244 ("include/linux/list.h: add a macro to test if entry is pointing to the head")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E . Hallyn " <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 security/apparmor/apparmorfs.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/security/apparmor/apparmorfs.c
+++ b/security/apparmor/apparmorfs.c
@@ -1960,9 +1960,6 @@ fail2:
 	return error;
 }
 
-
-#define list_entry_is_head(pos, head, member) (&pos->member == (head))
-
 /**
  * __next_ns - find the next namespace to list
  * @root: root namespace to stop search at (NOT NULL)

[PATCH 5.4 11/50] ARM: 9077/1: PLT: Move struct plt_entries definition to header

[Greg Kroah-Hartman]

From: Alex Sverdlin <alexander.sverdlin@nokia.com>

commit 4e271701c17dee70c6e1351c4d7d42e70405c6a9 upstream

No functional change, later it will be re-used in several files.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/include/asm/module.h |    9 +++++++++
 arch/arm/kernel/module-plts.c |    9 ---------
 2 files changed, 9 insertions(+), 9 deletions(-)

--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -19,6 +19,15 @@ enum {
 };
 #endif
 
+#define PLT_ENT_STRIDE		L1_CACHE_BYTES
+#define PLT_ENT_COUNT		(PLT_ENT_STRIDE / sizeof(u32))
+#define PLT_ENT_SIZE		(sizeof(struct plt_entries) / PLT_ENT_COUNT)
+
+struct plt_entries {
+	u32	ldr[PLT_ENT_COUNT];
+	u32	lit[PLT_ENT_COUNT];
+};
+
 struct mod_plt_sec {
 	struct elf32_shdr	*plt;
 	int			plt_count;
--- a/arch/arm/kernel/module-plts.c
+++ b/arch/arm/kernel/module-plts.c
@@ -11,10 +11,6 @@
 #include <asm/cache.h>
 #include <asm/opcodes.h>
 
-#define PLT_ENT_STRIDE		L1_CACHE_BYTES
-#define PLT_ENT_COUNT		(PLT_ENT_STRIDE / sizeof(u32))
-#define PLT_ENT_SIZE		(sizeof(struct plt_entries) / PLT_ENT_COUNT)
-
 #ifdef CONFIG_THUMB2_KERNEL
 #define PLT_ENT_LDR		__opcode_to_mem_thumb32(0xf8dff000 | \
 							(PLT_ENT_STRIDE - 4))
@@ -23,11 +19,6 @@
 						    (PLT_ENT_STRIDE - 8))
 #endif
 
-struct plt_entries {
-	u32	ldr[PLT_ENT_COUNT];
-	u32	lit[PLT_ENT_COUNT];
-};
-
 static bool in_init(const struct module *mod, unsigned long loc)
 {
 	return loc - (u32)mod->init_layout.base < mod->init_layout.size;

[PATCH 5.4 12/50] ARM: 9078/1: Add warn suppress parameter to arm_gen_branch_link()

[Greg Kroah-Hartman]

From: Alex Sverdlin <alexander.sverdlin@nokia.com>

commit 890cb057a46d323fd8c77ebecb6485476614cd21 upstream

Will be used in the following patch. No functional change.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/include/asm/insn.h |    8 ++++----
 arch/arm/kernel/ftrace.c    |    2 +-
 arch/arm/kernel/insn.c      |   19 ++++++++++---------
 3 files changed, 15 insertions(+), 14 deletions(-)

--- a/arch/arm/include/asm/insn.h
+++ b/arch/arm/include/asm/insn.h
@@ -13,18 +13,18 @@ arm_gen_nop(void)
 }
 
 unsigned long
-__arm_gen_branch(unsigned long pc, unsigned long addr, bool link);
+__arm_gen_branch(unsigned long pc, unsigned long addr, bool link, bool warn);
 
 static inline unsigned long
 arm_gen_branch(unsigned long pc, unsigned long addr)
 {
-	return __arm_gen_branch(pc, addr, false);
+	return __arm_gen_branch(pc, addr, false, true);
 }
 
 static inline unsigned long
-arm_gen_branch_link(unsigned long pc, unsigned long addr)
+arm_gen_branch_link(unsigned long pc, unsigned long addr, bool warn)
 {
-	return __arm_gen_branch(pc, addr, true);
+	return __arm_gen_branch(pc, addr, true, warn);
 }
 
 #endif
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -73,7 +73,7 @@ int ftrace_arch_code_modify_post_process
 
 static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
 {
-	return arm_gen_branch_link(pc, addr);
+	return arm_gen_branch_link(pc, addr, true);
 }
 
 static int ftrace_modify_code(unsigned long pc, unsigned long old,
--- a/arch/arm/kernel/insn.c
+++ b/arch/arm/kernel/insn.c
@@ -3,8 +3,9 @@
 #include <linux/kernel.h>
 #include <asm/opcodes.h>
 
-static unsigned long
-__arm_gen_branch_thumb2(unsigned long pc, unsigned long addr, bool link)
+static unsigned long __arm_gen_branch_thumb2(unsigned long pc,
+					     unsigned long addr, bool link,
+					     bool warn)
 {
 	unsigned long s, j1, j2, i1, i2, imm10, imm11;
 	unsigned long first, second;
@@ -12,7 +13,7 @@ __arm_gen_branch_thumb2(unsigned long pc
 
 	offset = (long)addr - (long)(pc + 4);
 	if (offset < -16777216 || offset > 16777214) {
-		WARN_ON_ONCE(1);
+		WARN_ON_ONCE(warn);
 		return 0;
 	}
 
@@ -33,8 +34,8 @@ __arm_gen_branch_thumb2(unsigned long pc
 	return __opcode_thumb32_compose(first, second);
 }
 
-static unsigned long
-__arm_gen_branch_arm(unsigned long pc, unsigned long addr, bool link)
+static unsigned long __arm_gen_branch_arm(unsigned long pc, unsigned long addr,
+					  bool link, bool warn)
 {
 	unsigned long opcode = 0xea000000;
 	long offset;
@@ -44,7 +45,7 @@ __arm_gen_branch_arm(unsigned long pc, u
 
 	offset = (long)addr - (long)(pc + 8);
 	if (unlikely(offset < -33554432 || offset > 33554428)) {
-		WARN_ON_ONCE(1);
+		WARN_ON_ONCE(warn);
 		return 0;
 	}
 
@@ -54,10 +55,10 @@ __arm_gen_branch_arm(unsigned long pc, u
 }
 
 unsigned long
-__arm_gen_branch(unsigned long pc, unsigned long addr, bool link)
+__arm_gen_branch(unsigned long pc, unsigned long addr, bool link, bool warn)
 {
 	if (IS_ENABLED(CONFIG_THUMB2_KERNEL))
-		return __arm_gen_branch_thumb2(pc, addr, link);
+		return __arm_gen_branch_thumb2(pc, addr, link, warn);
 	else
-		return __arm_gen_branch_arm(pc, addr, link);
+		return __arm_gen_branch_arm(pc, addr, link, warn);
 }

[PATCH 5.4 13/50] ARM: 9079/1: ftrace: Add MODULE_PLTS support

[Greg Kroah-Hartman]

From: Alex Sverdlin <alexander.sverdlin@nokia.com>

commit 79f32b221b18c15a98507b101ef4beb52444cc6f upstream

Teach ftrace_make_call() and ftrace_make_nop() about PLTs.
Teach PLT code about FTRACE and all its callbacks.
Otherwise the following might happen:

------------[ cut here ]------------
WARNING: CPU: 14 PID: 2265 at .../arch/arm/kernel/insn.c:14 __arm_gen_branch+0x83/0x8c()
...
Hardware name: LSI Axxia AXM55XX
[<c0314a49>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14)
[<c03115e9>] (show_stack) from [<c0519f51>] (dump_stack+0x81/0xa8)
[<c0519f51>] (dump_stack) from [<c032185d>] (warn_slowpath_common+0x69/0x90)
[<c032185d>] (warn_slowpath_common) from [<c03218f3>] (warn_slowpath_null+0x17/0x1c)
[<c03218f3>] (warn_slowpath_null) from [<c03143cf>] (__arm_gen_branch+0x83/0x8c)
[<c03143cf>] (__arm_gen_branch) from [<c0314337>] (ftrace_make_nop+0xf/0x24)
[<c0314337>] (ftrace_make_nop) from [<c038ebcb>] (ftrace_process_locs+0x27b/0x3e8)
[<c038ebcb>] (ftrace_process_locs) from [<c0378d79>] (load_module+0x11e9/0x1a44)
[<c0378d79>] (load_module) from [<c037974d>] (SyS_finit_module+0x59/0x84)
[<c037974d>] (SyS_finit_module) from [<c030e981>] (ret_fast_syscall+0x1/0x18)
---[ end trace e1b64ced7a89adcc ]---
------------[ cut here ]------------
WARNING: CPU: 14 PID: 2265 at .../kernel/trace/ftrace.c:1979 ftrace_bug+0x1b1/0x234()
...
Hardware name: LSI Axxia AXM55XX
[<c0314a49>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14)
[<c03115e9>] (show_stack) from [<c0519f51>] (dump_stack+0x81/0xa8)
[<c0519f51>] (dump_stack) from [<c032185d>] (warn_slowpath_common+0x69/0x90)
[<c032185d>] (warn_slowpath_common) from [<c03218f3>] (warn_slowpath_null+0x17/0x1c)
[<c03218f3>] (warn_slowpath_null) from [<c038e87d>] (ftrace_bug+0x1b1/0x234)
[<c038e87d>] (ftrace_bug) from [<c038ebd5>] (ftrace_process_locs+0x285/0x3e8)
[<c038ebd5>] (ftrace_process_locs) from [<c0378d79>] (load_module+0x11e9/0x1a44)
[<c0378d79>] (load_module) from [<c037974d>] (SyS_finit_module+0x59/0x84)
[<c037974d>] (SyS_finit_module) from [<c030e981>] (ret_fast_syscall+0x1/0x18)
---[ end trace e1b64ced7a89adcd ]---
ftrace failed to modify [<e9ef7006>] 0xe9ef7006
actual: 02:f0:3b:fa
ftrace record flags: 0
(0) expected tramp: c0314265

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/include/asm/ftrace.h |    3 ++
 arch/arm/include/asm/module.h |    1 
 arch/arm/kernel/ftrace.c      |   46 ++++++++++++++++++++++++++++++++++--------
 arch/arm/kernel/module-plts.c |   44 ++++++++++++++++++++++++++++++++++++----
 4 files changed, 82 insertions(+), 12 deletions(-)

--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -16,6 +16,9 @@ extern void __gnu_mcount_nc(void);
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 struct dyn_arch_ftrace {
+#ifdef CONFIG_ARM_MODULE_PLTS
+	struct module *mod;
+#endif
 };
 
 static inline unsigned long ftrace_call_adjust(unsigned long addr)
--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -30,6 +30,7 @@ struct plt_entries {
 
 struct mod_plt_sec {
 	struct elf32_shdr	*plt;
+	struct plt_entries	*plt_ent;
 	int			plt_count;
 };
 
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -71,9 +71,10 @@ int ftrace_arch_code_modify_post_process
 	return 0;
 }
 
-static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
+static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr,
+					 bool warn)
 {
-	return arm_gen_branch_link(pc, addr, true);
+	return arm_gen_branch_link(pc, addr, warn);
 }
 
 static int ftrace_modify_code(unsigned long pc, unsigned long old,
@@ -112,14 +113,14 @@ int ftrace_update_ftrace_func(ftrace_fun
 	int ret;
 
 	pc = (unsigned long)&ftrace_call;
-	new = ftrace_call_replace(pc, (unsigned long)func);
+	new = ftrace_call_replace(pc, (unsigned long)func, true);
 
 	ret = ftrace_modify_code(pc, 0, new, false);
 
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
 	if (!ret) {
 		pc = (unsigned long)&ftrace_regs_call;
-		new = ftrace_call_replace(pc, (unsigned long)func);
+		new = ftrace_call_replace(pc, (unsigned long)func, true);
 
 		ret = ftrace_modify_code(pc, 0, new, false);
 	}
@@ -132,10 +133,22 @@ int ftrace_make_call(struct dyn_ftrace *
 {
 	unsigned long new, old;
 	unsigned long ip = rec->ip;
+	unsigned long aaddr = adjust_address(rec, addr);
+	struct module *mod = NULL;
+
+#ifdef CONFIG_ARM_MODULE_PLTS
+	mod = rec->arch.mod;
+#endif
 
 	old = ftrace_nop_replace(rec);
 
-	new = ftrace_call_replace(ip, adjust_address(rec, addr));
+	new = ftrace_call_replace(ip, aaddr, !mod);
+#ifdef CONFIG_ARM_MODULE_PLTS
+	if (!new && mod) {
+		aaddr = get_module_plt(mod, ip, aaddr);
+		new = ftrace_call_replace(ip, aaddr, true);
+	}
+#endif
 
 	return ftrace_modify_code(rec->ip, old, new, true);
 }
@@ -148,9 +161,9 @@ int ftrace_modify_call(struct dyn_ftrace
 	unsigned long new, old;
 	unsigned long ip = rec->ip;
 
-	old = ftrace_call_replace(ip, adjust_address(rec, old_addr));
+	old = ftrace_call_replace(ip, adjust_address(rec, old_addr), true);
 
-	new = ftrace_call_replace(ip, adjust_address(rec, addr));
+	new = ftrace_call_replace(ip, adjust_address(rec, addr), true);
 
 	return ftrace_modify_code(rec->ip, old, new, true);
 }
@@ -160,12 +173,29 @@ int ftrace_modify_call(struct dyn_ftrace
 int ftrace_make_nop(struct module *mod,
 		    struct dyn_ftrace *rec, unsigned long addr)
 {
+	unsigned long aaddr = adjust_address(rec, addr);
 	unsigned long ip = rec->ip;
 	unsigned long old;
 	unsigned long new;
 	int ret;
 
-	old = ftrace_call_replace(ip, adjust_address(rec, addr));
+#ifdef CONFIG_ARM_MODULE_PLTS
+	/* mod is only supplied during module loading */
+	if (!mod)
+		mod = rec->arch.mod;
+	else
+		rec->arch.mod = mod;
+#endif
+
+	old = ftrace_call_replace(ip, aaddr,
+				  !IS_ENABLED(CONFIG_ARM_MODULE_PLTS) || !mod);
+#ifdef CONFIG_ARM_MODULE_PLTS
+	if (!old && mod) {
+		aaddr = get_module_plt(mod, ip, aaddr);
+		old = ftrace_call_replace(ip, aaddr, true);
+	}
+#endif
+
 	new = ftrace_nop_replace(rec);
 	ret = ftrace_modify_code(ip, old, new, true);
 
--- a/arch/arm/kernel/module-plts.c
+++ b/arch/arm/kernel/module-plts.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/elf.h>
+#include <linux/ftrace.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/sort.h>
@@ -19,19 +20,52 @@
 						    (PLT_ENT_STRIDE - 8))
 #endif
 
+static const u32 fixed_plts[] = {
+#ifdef CONFIG_FUNCTION_TRACER
+	FTRACE_ADDR,
+	MCOUNT_ADDR,
+#endif
+};
+
 static bool in_init(const struct module *mod, unsigned long loc)
 {
 	return loc - (u32)mod->init_layout.base < mod->init_layout.size;
 }
 
+static void prealloc_fixed(struct mod_plt_sec *pltsec, struct plt_entries *plt)
+{
+	int i;
+
+	if (!ARRAY_SIZE(fixed_plts) || pltsec->plt_count)
+		return;
+	pltsec->plt_count = ARRAY_SIZE(fixed_plts);
+
+	for (i = 0; i < ARRAY_SIZE(plt->ldr); ++i)
+		plt->ldr[i] = PLT_ENT_LDR;
+
+	BUILD_BUG_ON(sizeof(fixed_plts) > sizeof(plt->lit));
+	memcpy(plt->lit, fixed_plts, sizeof(fixed_plts));
+}
+
 u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val)
 {
 	struct mod_plt_sec *pltsec = !in_init(mod, loc) ? &mod->arch.core :
 							  &mod->arch.init;
+	struct plt_entries *plt;
+	int idx;
+
+	/* cache the address, ELF header is available only during module load */
+	if (!pltsec->plt_ent)
+		pltsec->plt_ent = (struct plt_entries *)pltsec->plt->sh_addr;
+	plt = pltsec->plt_ent;
 
-	struct plt_entries *plt = (struct plt_entries *)pltsec->plt->sh_addr;
-	int idx = 0;
+	prealloc_fixed(pltsec, plt);
+
+	for (idx = 0; idx < ARRAY_SIZE(fixed_plts); ++idx)
+		if (plt->lit[idx] == val)
+			return (u32)&plt->ldr[idx];
 
+	idx = 0;
 	/*
 	 * Look for an existing entry pointing to 'val'. Given that the
 	 * relocations are sorted, this will be the last entry we allocated.
@@ -179,8 +213,8 @@ static unsigned int count_plts(const Elf
 int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 			      char *secstrings, struct module *mod)
 {
-	unsigned long core_plts = 0;
-	unsigned long init_plts = 0;
+	unsigned long core_plts = ARRAY_SIZE(fixed_plts);
+	unsigned long init_plts = ARRAY_SIZE(fixed_plts);
 	Elf32_Shdr *s, *sechdrs_end = sechdrs + ehdr->e_shnum;
 	Elf32_Sym *syms = NULL;
 
@@ -235,6 +269,7 @@ int module_frob_arch_sections(Elf_Ehdr *
 	mod->arch.core.plt->sh_size = round_up(core_plts * PLT_ENT_SIZE,
 					       sizeof(struct plt_entries));
 	mod->arch.core.plt_count = 0;
+	mod->arch.core.plt_ent = NULL;
 
 	mod->arch.init.plt->sh_type = SHT_NOBITS;
 	mod->arch.init.plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
@@ -242,6 +277,7 @@ int module_frob_arch_sections(Elf_Ehdr *
 	mod->arch.init.plt->sh_size = round_up(init_plts * PLT_ENT_SIZE,
 					       sizeof(struct plt_entries));
 	mod->arch.init.plt_count = 0;
+	mod->arch.init.plt_ent = NULL;
 
 	pr_debug("%s: plt=%x, init.plt=%x\n", __func__,
 		 mod->arch.core.plt->sh_size, mod->arch.init.plt->sh_size);

[PATCH 5.4 14/50] ARM: 9098/1: ftrace: MODULE_PLT: Fix build problem without DYNAMIC_FTRACE

[Greg Kroah-Hartman]

From: Alex Sverdlin <alexander.sverdlin@nokia.com>

commit 6fa630bf473827aee48cbf0efbbdf6f03134e890 upstream

FTRACE_ADDR is only defined when CONFIG_DYNAMIC_FTRACE is defined, the
latter is even stronger requirement than CONFIG_FUNCTION_TRACER (which is
enough for MCOUNT_ADDR).

Link: https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/ZUVCQBHDMFVR7CCB7JPESLJEWERZDJ3T/

Fixes: 1f12fb25c5c5d22f ("ARM: 9079/1: ftrace: Add MODULE_PLTS support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/kernel/module-plts.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/kernel/module-plts.c
+++ b/arch/arm/kernel/module-plts.c
@@ -21,7 +21,7 @@
 #endif
 
 static const u32 fixed_plts[] = {
-#ifdef CONFIG_FUNCTION_TRACER
+#ifdef CONFIG_DYNAMIC_FTRACE
 	FTRACE_ADDR,
 	MCOUNT_ADDR,
 #endif

[PATCH 5.4 15/50] sctp: validate chunk size in __rcv_asconf_lookup

[Greg Kroah-Hartman]

From: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>

commit b6ffe7671b24689c09faa5675dd58f93758a97ae upstream.

In one of the fallbacks that SCTP has for identifying an association for an
incoming packet, it looks for AddIp chunk (from ASCONF) and take a peek.
Thing is, at this stage nothing was validating that the chunk actually had
enough content for that, allowing the peek to happen over uninitialized
memory.

Similar check already exists in actual asconf handling in
sctp_verify_asconf().

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/input.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -1168,6 +1168,9 @@ static struct sctp_association *__sctp_r
 	union sctp_addr_param *param;
 	union sctp_addr paddr;
 
+	if (ntohs(ch->length) < sizeof(*asconf) + sizeof(struct sctp_paramhdr))
+		return NULL;
+
 	/* Skip over the ADDIP header and find the Address parameter */
 	param = (union sctp_addr_param *)(asconf + 1);
 

[PATCH 5.4 16/50] sctp: add param size validation for SCTP_PARAM_SET_PRIMARY

[Greg Kroah-Hartman]

From: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>

commit ef6c8d6ccf0c1dccdda092ebe8782777cd7803c9 upstream.

When SCTP handles an INIT chunk, it calls for example:
sctp_sf_do_5_1B_init
  sctp_verify_init
    sctp_verify_param
  sctp_process_init
    sctp_process_param
      handling of SCTP_PARAM_SET_PRIMARY

sctp_verify_init() wasn't doing proper size validation and neither the
later handling, allowing it to work over the chunk itself, possibly being
uninitialized memory.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/sm_make_chunk.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -2157,9 +2157,16 @@ static enum sctp_ierror sctp_verify_para
 		break;
 
 	case SCTP_PARAM_SET_PRIMARY:
-		if (ep->asconf_enable)
-			break;
-		goto unhandled;
+		if (!ep->asconf_enable)
+			goto unhandled;
+
+		if (ntohs(param.p->length) < sizeof(struct sctp_addip_param) +
+					     sizeof(struct sctp_paramhdr)) {
+			sctp_process_inv_paramlength(asoc, param.p,
+						     chunk, err_chunk);
+			retval = SCTP_IERROR_ABORT;
+		}
+		break;
 
 	case SCTP_PARAM_HOST_NAME_ADDRESS:
 		/* Tell the peer, we won't support this param.  */

[PATCH 5.4 17/50] staging: rtl8192u: Fix bitwise vs logical operator in TranslateRxSignalStuff819xUsb()

[Greg Kroah-Hartman]

From: Nathan Chancellor <nathan@kernel.org>

commit 099ec97ac92911abfb102bb5c68ed270fc12e0dd upstream.

clang warns:

drivers/staging/rtl8192u/r8192U_core.c:4268:20: warning: bitwise and of
boolean expressions; did you mean logical and? [-Wbool-operation-and]
        bpacket_toself =  bpacket_match_bssid &
                          ^~~~~~~~~~~~~~~~~~~~~
                                              &&
1 warning generated.

Replace the bitwise AND with a logical one to clear up the warning, as
that is clearly what was intended.

Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210814235625.1780033-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/rtl8192u/r8192U_core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -4338,7 +4338,7 @@ static void TranslateRxSignalStuff819xUs
 	bpacket_match_bssid = (type != IEEE80211_FTYPE_CTL) &&
 			       (ether_addr_equal(priv->ieee80211->current_network.bssid,  (fc & IEEE80211_FCTL_TODS) ? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS) ? hdr->addr2 : hdr->addr3))
 			       && (!pstats->bHwError) && (!pstats->bCRC) && (!pstats->bICV);
-	bpacket_toself =  bpacket_match_bssid &
+	bpacket_toself =  bpacket_match_bssid &&
 			  (ether_addr_equal(praddr, priv->ieee80211->dev->dev_addr));
 
 	if (WLAN_FC_GET_FRAMETYPE(fc) == IEEE80211_STYPE_BEACON)

[PATCH 5.4 18/50] um: virtio_uml: fix memory leak on init failures

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

commit 7ad28e0df7ee9dbcb793bb88dd81d4d22bb9a10e upstream.

If initialization fails, e.g. because the connection failed,
we leak the 'vu_dev'. Fix that. Reported by smatch.

Fixes: 5d38f324993f ("um: drivers: Add virtio vhost-user driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/um/drivers/virtio_uml.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/arch/um/drivers/virtio_uml.c
+++ b/arch/um/drivers/virtio_uml.c
@@ -994,7 +994,7 @@ static int virtio_uml_probe(struct platf
 		rc = os_connect_socket(pdata->socket_path);
 	} while (rc == -EINTR);
 	if (rc < 0)
-		return rc;
+		goto error_free;
 	vu_dev->sock = rc;
 
 	rc = vhost_user_init(vu_dev);
@@ -1010,6 +1010,8 @@ static int virtio_uml_probe(struct platf
 
 error_init:
 	os_close_file(vu_dev->sock);
+error_free:
+	kfree(vu_dev);
 	return rc;
 }
 

[PATCH 5.4 19/50] dmaengine: acpi: Avoid comparison GSI with Linux vIRQ

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

commit 67db87dc8284070adb15b3c02c1c31d5cf51c5d6 upstream.

Currently the CRST parsing relies on the fact that on most of x86 devices
the IRQ mapping is 1:1 with Linux vIRQ. However, it may be not true for
some. Fix this by converting GSI to Linux vIRQ before checking it.

Fixes: ee8209fd026b ("dma: acpi-dma: parse CSRT to extract additional resources")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210730202715.24375-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma/acpi-dma.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/dma/acpi-dma.c
+++ b/drivers/dma/acpi-dma.c
@@ -70,10 +70,14 @@ static int acpi_dma_parse_resource_group
 
 	si = (const struct acpi_csrt_shared_info *)&grp[1];
 
-	/* Match device by MMIO and IRQ */
+	/* Match device by MMIO */
 	if (si->mmio_base_low != lower_32_bits(mem) ||
-	    si->mmio_base_high != upper_32_bits(mem) ||
-	    si->gsi_interrupt != irq)
+	    si->mmio_base_high != upper_32_bits(mem))
+		return 0;
+
+	/* Match device by Linux vIRQ */
+	ret = acpi_register_gsi(NULL, si->gsi_interrupt, si->interrupt_mode, si->interrupt_polarity);
+	if (ret != irq)
 		return 0;
 
 	dev_dbg(&adev->dev, "matches with %.4s%04X (rev %u)\n",

[PATCH 5.4 20/50] thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 02d438f62c05f0d055ceeedf12a2f8796b258c08 upstream.

This error path return success but it should propagate the negative
error code from devm_clk_get().

Fixes: 6c247393cfdd ("thermal: exynos: Add TMU support for Exynos7 SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210810084413.GA23810@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/thermal/samsung/exynos_tmu.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -1070,6 +1070,7 @@ static int exynos_tmu_probe(struct platf
 		data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk");
 		if (IS_ERR(data->sclk)) {
 			dev_err(&pdev->dev, "Failed to get sclk\n");
+			ret = PTR_ERR(data->sclk);
 			goto err_clk;
 		} else {
 			ret = clk_prepare_enable(data->sclk);

[PATCH 5.4 21/50] 9p/trans_virtio: Remove sysfs file on probe failure

[Greg Kroah-Hartman]

From: Xie Yongji <xieyongji@bytedance.com>

commit f997ea3b7afc108eb9761f321b57de2d089c7c48 upstream.

This ensures we don't leak the sysfs file if we failed to
allocate chan->vc_wq during probe.

Link: http://lkml.kernel.org/r/20210517083557.172-1-xieyongji@bytedance.com
Fixes: 86c8437383ac ("net/9p: Add sysfs mount_tag file for virtio 9P device")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/9p/trans_virtio.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -605,7 +605,7 @@ static int p9_virtio_probe(struct virtio
 	chan->vc_wq = kmalloc(sizeof(wait_queue_head_t), GFP_KERNEL);
 	if (!chan->vc_wq) {
 		err = -ENOMEM;
-		goto out_free_tag;
+		goto out_remove_file;
 	}
 	init_waitqueue_head(chan->vc_wq);
 	chan->ring_bufs_avail = 1;
@@ -623,6 +623,8 @@ static int p9_virtio_probe(struct virtio
 
 	return 0;
 
+out_remove_file:
+	sysfs_remove_file(&vdev->dev.kobj, &dev_attr_mount_tag.attr);
 out_free_tag:
 	kfree(tag);
 out_free_vq:

[PATCH 5.4 22/50] prctl: allow to setup brk for et_dyn executables

[Greg Kroah-Hartman]

From: Cyrill Gorcunov <gorcunov@gmail.com>

commit e1fbbd073137a9d63279f6bf363151a938347640 upstream.

Keno Fischer reported that when a binray loaded via ld-linux-x the
prctl(PR_SET_MM_MAP) doesn't allow to setup brk value because it lays
before mm:end_data.

For example a test program shows

 | # ~/t
 |
 | start_code      401000
 | end_code        401a15
 | start_stack     7ffce4577dd0
 | start_data	   403e10
 | end_data        40408c
 | start_brk	   b5b000
 | sbrk(0)         b5b000

and when executed via ld-linux

 | # /lib64/ld-linux-x86-64.so.2 ~/t
 |
 | start_code      7fc25b0a4000
 | end_code        7fc25b0c4524
 | start_stack     7fffcc6b2400
 | start_data	   7fc25b0ce4c0
 | end_data        7fc25b0cff98
 | start_brk	   55555710c000
 | sbrk(0)         55555710c000

This of course prevent criu from restoring such programs.  Looking into
how kernel operates with brk/start_brk inside brk() syscall I don't see
any problem if we allow to setup brk/start_brk without checking for
end_data.  Even if someone pass some weird address here on a purpose then
the worst possible result will be an unexpected unmapping of existing vma
(own vma, since prctl works with the callers memory) but test for
RLIMIT_DATA is still valid and a user won't be able to gain more memory in
case of expanding VMAs via new values shipped with prctl call.

Link: https://lkml.kernel.org/r/20210121221207.GB2174@grain
Fixes: bbdc6076d2e5 ("binfmt_elf: move brk out of mmap when doing direct loader exec")
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reported-by: Keno Fischer <keno@juliacomputing.com>
Acked-by: Andrey Vagin <avagin@gmail.com>
Tested-by: Andrey Vagin <avagin@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/sys.c |    7 -------
 1 file changed, 7 deletions(-)

--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1928,13 +1928,6 @@ static int validate_prctl_map_addr(struc
 	error = -EINVAL;
 
 	/*
-	 * @brk should be after @end_data in traditional maps.
-	 */
-	if (prctl_map->start_brk <= prctl_map->end_data ||
-	    prctl_map->brk <= prctl_map->end_data)
-		goto out;
-
-	/*
 	 * Neither we should allow to override limits if they set.
 	 */
 	if (check_data_rlimit(rlimit(RLIMIT_DATA), prctl_map->brk,

[PATCH 5.4 23/50] nilfs2: use refcount_dec_and_lock() to fix potential UAF

[Greg Kroah-Hartman]

From: Zhen Lei <thunder.leizhen@huawei.com>

commit 98e2e409e76ef7781d8511f997359e9c504a95c1 upstream.

When the refcount is decreased to 0, the resource reclamation branch is
entered.  Before CPU0 reaches the race point (1), CPU1 may obtain the
spinlock and traverse the rbtree to find 'root', see
nilfs_lookup_root().

Although CPU1 will call refcount_inc() to increase the refcount, it is
obviously too late.  CPU0 will release 'root' directly, CPU1 then
accesses 'root' and triggers UAF.

Use refcount_dec_and_lock() to ensure that both the operations of
decrease refcount to 0 and link deletion are lock protected eliminates
this risk.

	     CPU0                      CPU1
	nilfs_put_root():
		    <-------- (1)
				spin_lock(&nilfs->ns_cptree_lock);
				rb_erase(&root->rb_node, &nilfs->ns_cptree);
				spin_unlock(&nilfs->ns_cptree_lock);

	kfree(root);
		    <-------- use-after-free

  refcount_t: underflow; use-after-free.
  WARNING: CPU: 2 PID: 9476 at lib/refcount.c:28 \
  refcount_warn_saturate+0x1cf/0x210 lib/refcount.c:28
  Modules linked in:
  CPU: 2 PID: 9476 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ...
  RIP: 0010:refcount_warn_saturate+0x1cf/0x210 lib/refcount.c:28
  ... ...
  Call Trace:
     __refcount_sub_and_test include/linux/refcount.h:283 [inline]
     __refcount_dec_and_test include/linux/refcount.h:315 [inline]
     refcount_dec_and_test include/linux/refcount.h:333 [inline]
     nilfs_put_root+0xc1/0xd0 fs/nilfs2/the_nilfs.c:795
     nilfs_segctor_destroy fs/nilfs2/segment.c:2749 [inline]
     nilfs_detach_log_writer+0x3fa/0x570 fs/nilfs2/segment.c:2812
     nilfs_put_super+0x2f/0xf0 fs/nilfs2/super.c:467
     generic_shutdown_super+0xcd/0x1f0 fs/super.c:464
     kill_block_super+0x4a/0x90 fs/super.c:1446
     deactivate_locked_super+0x6a/0xb0 fs/super.c:335
     deactivate_super+0x85/0x90 fs/super.c:366
     cleanup_mnt+0x277/0x2e0 fs/namespace.c:1118
     __cleanup_mnt+0x15/0x20 fs/namespace.c:1125
     task_work_run+0x8e/0x110 kernel/task_work.c:151
     tracehook_notify_resume include/linux/tracehook.h:188 [inline]
     exit_to_user_mode_loop kernel/entry/common.c:164 [inline]
     exit_to_user_mode_prepare+0x13c/0x170 kernel/entry/common.c:191
     syscall_exit_to_user_mode+0x16/0x30 kernel/entry/common.c:266
     do_syscall_64+0x45/0x80 arch/x86/entry/common.c:56
     entry_SYSCALL_64_after_hwframe+0x44/0xa9

There is no reproduction program, and the above is only theoretical
analysis.

Link: https://lkml.kernel.org/r/1629859428-5906-1-git-send-email-konishi.ryusuke@gmail.com
Fixes: ba65ae4729bf ("nilfs2: add checkpoint tree to nilfs object")
Link: https://lkml.kernel.org/r/20210723012317.4146-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nilfs2/the_nilfs.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

--- a/fs/nilfs2/the_nilfs.c
+++ b/fs/nilfs2/the_nilfs.c
@@ -797,14 +797,13 @@ nilfs_find_or_create_root(struct the_nil
 
 void nilfs_put_root(struct nilfs_root *root)
 {
-	if (refcount_dec_and_test(&root->count)) {
-		struct the_nilfs *nilfs = root->nilfs;
+	struct the_nilfs *nilfs = root->nilfs;
 
-		nilfs_sysfs_delete_snapshot_group(root);
-
-		spin_lock(&nilfs->ns_cptree_lock);
+	if (refcount_dec_and_lock(&root->count, &nilfs->ns_cptree_lock)) {
 		rb_erase(&root->rb_node, &nilfs->ns_cptree);
 		spin_unlock(&nilfs->ns_cptree_lock);
+
+		nilfs_sysfs_delete_snapshot_group(root);
 		iput(root->ifile);
 
 		kfree(root);

[PATCH 5.4 24/50] profiling: fix shift-out-of-bounds bugs

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

commit 2d186afd04d669fe9c48b994c41a7405a3c9f16d upstream.

Syzbot reported shift-out-of-bounds bug in profile_init().
The problem was in incorrect prof_shift. Since prof_shift value comes from
userspace we need to clamp this value into [0, BITS_PER_LONG -1]
boundaries.

Second possible shiht-out-of-bounds was found by Tetsuo:
sample_step local variable in read_profile() had "unsigned int" type,
but prof_shift allows to make a BITS_PER_LONG shift. So, to prevent
possible shiht-out-of-bounds sample_step type was changed to
"unsigned long".

Also, "unsigned short int" will be sufficient for storing
[0, BITS_PER_LONG] value, that's why there is no need for
"unsigned long" prof_shift.

Link: https://lkml.kernel.org/r/20210813140022.5011-1-paskripkin@gmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+e68c89a9510c159d9684@syzkaller.appspotmail.com
Suggested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/profile.c |   21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -41,7 +41,8 @@ struct profile_hit {
 #define NR_PROFILE_GRP		(NR_PROFILE_HIT/PROFILE_GRPSZ)
 
 static atomic_t *prof_buffer;
-static unsigned long prof_len, prof_shift;
+static unsigned long prof_len;
+static unsigned short int prof_shift;
 
 int prof_on __read_mostly;
 EXPORT_SYMBOL_GPL(prof_on);
@@ -67,8 +68,8 @@ int profile_setup(char *str)
 		if (str[strlen(sleepstr)] == ',')
 			str += strlen(sleepstr) + 1;
 		if (get_option(&str, &par))
-			prof_shift = par;
-		pr_info("kernel sleep profiling enabled (shift: %ld)\n",
+			prof_shift = clamp(par, 0, BITS_PER_LONG - 1);
+		pr_info("kernel sleep profiling enabled (shift: %u)\n",
 			prof_shift);
 #else
 		pr_warn("kernel sleep profiling requires CONFIG_SCHEDSTATS\n");
@@ -78,21 +79,21 @@ int profile_setup(char *str)
 		if (str[strlen(schedstr)] == ',')
 			str += strlen(schedstr) + 1;
 		if (get_option(&str, &par))
-			prof_shift = par;
-		pr_info("kernel schedule profiling enabled (shift: %ld)\n",
+			prof_shift = clamp(par, 0, BITS_PER_LONG - 1);
+		pr_info("kernel schedule profiling enabled (shift: %u)\n",
 			prof_shift);
 	} else if (!strncmp(str, kvmstr, strlen(kvmstr))) {
 		prof_on = KVM_PROFILING;
 		if (str[strlen(kvmstr)] == ',')
 			str += strlen(kvmstr) + 1;
 		if (get_option(&str, &par))
-			prof_shift = par;
-		pr_info("kernel KVM profiling enabled (shift: %ld)\n",
+			prof_shift = clamp(par, 0, BITS_PER_LONG - 1);
+		pr_info("kernel KVM profiling enabled (shift: %u)\n",
 			prof_shift);
 	} else if (get_option(&str, &par)) {
-		prof_shift = par;
+		prof_shift = clamp(par, 0, BITS_PER_LONG - 1);
 		prof_on = CPU_PROFILING;
-		pr_info("kernel profiling enabled (shift: %ld)\n",
+		pr_info("kernel profiling enabled (shift: %u)\n",
 			prof_shift);
 	}
 	return 1;
@@ -468,7 +469,7 @@ read_profile(struct file *file, char __u
 	unsigned long p = *ppos;
 	ssize_t read;
 	char *pnt;
-	unsigned int sample_step = 1 << prof_shift;
+	unsigned long sample_step = 1UL << prof_shift;
 
 	profile_flip_buffers();
 	if (p >= (prof_len+1)*sizeof(unsigned int))

[PATCH 5.4 25/50] pwm: lpc32xx: Dont modify HW state in .probe() after the PWM chip was registered

[Greg Kroah-Hartman]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

commit 3d2813fb17e5fd0d73c1d1442ca0192bde4af10e upstream.

This fixes a race condition: After pwmchip_add() is called there might
already be a consumer and then modifying the hardware behind the
consumer's back is bad. So set the default before.

(Side-note: I don't know what this register setting actually does, if
this modifies the polarity there is an inconsistency because the
inversed polarity isn't considered if the PWM is already running during
.probe().)

Fixes: acfd92fdfb93 ("pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default value")
Cc: Sylvain Lemieux <slemieux@tycoint.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pwm/pwm-lpc32xx.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/pwm/pwm-lpc32xx.c
+++ b/drivers/pwm/pwm-lpc32xx.c
@@ -120,17 +120,17 @@ static int lpc32xx_pwm_probe(struct plat
 	lpc32xx->chip.npwm = 1;
 	lpc32xx->chip.base = -1;
 
+	/* If PWM is disabled, configure the output to the default value */
+	val = readl(lpc32xx->base + (lpc32xx->chip.pwms[0].hwpwm << 2));
+	val &= ~PWM_PIN_LEVEL;
+	writel(val, lpc32xx->base + (lpc32xx->chip.pwms[0].hwpwm << 2));
+
 	ret = pwmchip_add(&lpc32xx->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to add PWM chip, error %d\n", ret);
 		return ret;
 	}
 
-	/* When PWM is disable, configure the output to the default value */
-	val = readl(lpc32xx->base + (lpc32xx->chip.pwms[0].hwpwm << 2));
-	val &= ~PWM_PIN_LEVEL;
-	writel(val, lpc32xx->base + (lpc32xx->chip.pwms[0].hwpwm << 2));
-
 	platform_set_drvdata(pdev, lpc32xx);
 
 	return 0;

[PATCH 5.4 26/50] pwm: mxs: Dont modify HW state in .probe() after the PWM chip was registered

[Greg Kroah-Hartman]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

commit 020162d6f49f2963062229814a56a89c86cbeaa8 upstream.

This fixes a race condition: After pwmchip_add() is called there might
already be a consumer and then modifying the hardware behind the
consumer's back is bad. So reset before calling pwmchip_add().

Note that reseting the hardware isn't the right thing to do if the PWM
is already running as it might e.g. disable (or even enable) a backlight
that is supposed to be on (or off).

Fixes: 4dce82c1e840 ("pwm: add pwm-mxs support")
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pwm/pwm-mxs.c |   13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

--- a/drivers/pwm/pwm-mxs.c
+++ b/drivers/pwm/pwm-mxs.c
@@ -150,6 +150,11 @@ static int mxs_pwm_probe(struct platform
 		return ret;
 	}
 
+	/* FIXME: Only do this if the PWM isn't already running */
+	ret = stmp_reset_block(mxs->base);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "failed to reset PWM\n");
+
 	ret = pwmchip_add(&mxs->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to add pwm chip %d\n", ret);
@@ -158,15 +163,7 @@ static int mxs_pwm_probe(struct platform
 
 	platform_set_drvdata(pdev, mxs);
 
-	ret = stmp_reset_block(mxs->base);
-	if (ret)
-		goto pwm_remove;
-
 	return 0;
-
-pwm_remove:
-	pwmchip_remove(&mxs->chip);
-	return ret;
 }
 
 static int mxs_pwm_remove(struct platform_device *pdev)

[PATCH 5.4 27/50] phy: avoid unnecessary link-up delay in polling mode

[Greg Kroah-Hartman]

From: Petr Oros <poros@redhat.com>

commit e96bd2d3b1f83170d1d5c1a99e439b39a22a5b58 upstream.

commit 93c0970493c71f ("net: phy: consider latched link-down status in
polling mode") removed double-read of latched link-state register for
polling mode from genphy_update_link(). This added extra ~1s delay into
sequence link down->up.
Following scenario:
 - After boot link goes up
 - phy_start() is called triggering an aneg restart, hence link goes
   down and link-down info is latched.
 - After aneg has finished link goes up. In phy_state_machine is checked
   link state but it is latched "link is down". The state machine is
   scheduled after one second and there is detected "link is up". This
   extra delay can be avoided when we keep link-state register double read
   in case when link was down previously.

With this solution we don't miss a link-down event in polling mode and
link-up is faster.

Details about this quirky behavior on Realtek phy:
Without patch:
T0:    aneg is started, link goes down, link-down status is latched
T0+3s: state machine runs, up-to-date link-down is read
T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1),
       here i read link-down (BMSR_LSTATUS==0),
T0+5s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1),
       up-to-date link-up is read (BMSR_LSTATUS==1),
       phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING

With patch:
T0:    aneg is started, link goes down, link-down status is latched
T0+3s: state machine runs, up-to-date link-down is read
T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1),
       first BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==0,
       second BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==1,
       phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING

Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/phy-c45.c    |    5 +++--
 drivers/net/phy/phy_device.c |    5 +++--
 2 files changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -239,9 +239,10 @@ int genphy_c45_read_link(struct phy_devi
 
 		/* The link state is latched low so that momentary link
 		 * drops can be detected. Do not double-read the status
-		 * in polling mode to detect such short link drops.
+		 * in polling mode to detect such short link drops except
+		 * the link was already down.
 		 */
-		if (!phy_polling_mode(phydev)) {
+		if (!phy_polling_mode(phydev) || !phydev->link) {
 			val = phy_read_mmd(phydev, devad, MDIO_STAT1);
 			if (val < 0)
 				return val;
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1766,9 +1766,10 @@ int genphy_update_link(struct phy_device
 
 	/* The link state is latched low so that momentary link
 	 * drops can be detected. Do not double-read the status
-	 * in polling mode to detect such short link drops.
+	 * in polling mode to detect such short link drops except
+	 * the link was already down.
 	 */
-	if (!phy_polling_mode(phydev)) {
+	if (!phy_polling_mode(phydev) || !phydev->link) {
 		status = phy_read(phydev, MII_BMSR);
 		if (status < 0)
 			return status;

[PATCH 5.4 28/50] net: stmmac: reset Tx desc base address before restarting Tx

[Greg Kroah-Hartman]

From: Jongsung Kim <neidhard.kim@lge.com>

commit f421031e3ff0dd288a6e1bbde9aa41a25bb814e6 upstream.

Refer to the databook of DesignWare Cores Ethernet MAC Universal:

6.2.1.5 Register 4 (Transmit Descriptor List Address Register

If this register is not changed when the ST bit is set to 0, then
the DMA takes the descriptor address where it was stopped earlier.

The stmmac_tx_err() does zero indices to Tx descriptors, but does
not reset HW current Tx descriptor address. To fix inconsistency,
the base address of the Tx descriptors should be rewritten before
restarting Tx.

Signed-off-by: Jongsung Kim <neidhard.kim@lge.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1987,6 +1987,8 @@ static void stmmac_tx_err(struct stmmac_
 	tx_q->cur_tx = 0;
 	tx_q->mss = 0;
 	netdev_tx_reset_queue(netdev_get_tx_queue(priv->dev, chan));
+	stmmac_init_tx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
+			    tx_q->dma_tx_phy, chan);
 	stmmac_start_tx_dma(priv, chan);
 
 	priv->dev->stats.tx_errors++;

[PATCH 5.4 29/50] Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH

[Greg Kroah-Hartman]

From: Lukas Bulwahn <lukas.bulwahn@gmail.com>

[ Upstream commit 6fe26259b4884b657cbc233fb9cdade9d704976e ]

Commit 05a4a9527931 ("kernel/watchdog: split up config options") adds a
new config HARDLOCKUP_DETECTOR, which selects the non-existing config
HARDLOCKUP_DETECTOR_ARCH.

Hence, ./scripts/checkkconfigsymbols.py warns:

HARDLOCKUP_DETECTOR_ARCH Referencing files: lib/Kconfig.debug

Simply drop selecting the non-existing HARDLOCKUP_DETECTOR_ARCH.

Link: https://lkml.kernel.org/r/20210806115618.22088-1-lukas.bulwahn@gmail.com
Fixes: 05a4a9527931 ("kernel/watchdog: split up config options")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Babu Moger <babu.moger@oracle.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/Kconfig.debug | 1 -
 1 file changed, 1 deletion(-)

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index ee00c6c8a373..a846f03901db 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -868,7 +868,6 @@ config HARDLOCKUP_DETECTOR
 	depends on HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_ARCH
 	select LOCKUP_DETECTOR
 	select HARDLOCKUP_DETECTOR_PERF if HAVE_HARDLOCKUP_DETECTOR_PERF
-	select HARDLOCKUP_DETECTOR_ARCH if HAVE_HARDLOCKUP_DETECTOR_ARCH
 	help
 	  Say Y here to enable the kernel to act as a watchdog to detect
 	  hard lockups.
-- 
2.33.0

[PATCH 5.4 30/50] thermal/core: Fix thermal_cooling_device_register() prototype

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit fb83610762dd5927212aa62a468dd3b756b57a88 ]

There are two pairs of declarations for thermal_cooling_device_register()
and thermal_of_cooling_device_register(), and only one set was changed
in a recent patch, so the other one now causes a compile-time warning:

drivers/net/wireless/mediatek/mt76/mt7915/init.c: In function 'mt7915_thermal_init':
drivers/net/wireless/mediatek/mt76/mt7915/init.c:134:48: error: passing argument 1 of 'thermal_cooling_device_register' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
  134 |         cdev = thermal_cooling_device_register(wiphy_name(wiphy), phy,
      |                                                ^~~~~~~~~~~~~~~~~
In file included from drivers/net/wireless/mediatek/mt76/mt7915/init.c:7:
include/linux/thermal.h:407:39: note: expected 'char *' but argument is of type 'const char *'
  407 | thermal_cooling_device_register(char *type, void *devdata,
      |                                 ~~~~~~^~~~

Change the dummy helper functions to have the same arguments as the
normal version.

Fixes: f991de53a8ab ("thermal: make device_register's type argument const")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210722090717.1116748-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/thermal.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index e45659c75920..a41378bdf27c 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -501,12 +501,13 @@ static inline void thermal_zone_device_update(struct thermal_zone_device *tz,
 static inline void thermal_zone_set_trips(struct thermal_zone_device *tz)
 { }
 static inline struct thermal_cooling_device *
-thermal_cooling_device_register(char *type, void *devdata,
+thermal_cooling_device_register(const char *type, void *devdata,
 	const struct thermal_cooling_device_ops *ops)
 { return ERR_PTR(-ENODEV); }
 static inline struct thermal_cooling_device *
 thermal_of_cooling_device_register(struct device_node *np,
-	char *type, void *devdata, const struct thermal_cooling_device_ops *ops)
+	const char *type, void *devdata,
+	const struct thermal_cooling_device_ops *ops)
 { return ERR_PTR(-ENODEV); }
 static inline struct thermal_cooling_device *
 devm_thermal_of_cooling_device_register(struct device *dev,
-- 
2.33.0

[PATCH 5.4 31/50] drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()

[Greg Kroah-Hartman]

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit 4b92d4add5f6dcf21275185c997d6ecb800054cd ]

DEFINE_SMP_CALL_CACHE_FUNCTION() was usefel before the CPU hotplug rework
to ensure that the cache related functions are called on the upcoming CPU
because the notifier itself could run on any online CPU.

The hotplug state machine guarantees that the callbacks are invoked on the
upcoming CPU. So there is no need to have this SMP function call
obfuscation. That indirection was missed when the hotplug notifiers were
converted.

This also solves the problem of ARM64 init_cache_level() invoking ACPI
functions which take a semaphore in that context. That's invalid as SMP
function calls run with interrupts disabled. Running it just from the
callback in context of the CPU hotplug thread solves this.

Fixes: 8571890e1513 ("arm64: Add support for ACPI based firmware tables")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/871r69ersb.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/cacheinfo.c   |  7 ++-----
 arch/mips/kernel/cacheinfo.c    |  7 ++-----
 arch/riscv/kernel/cacheinfo.c   |  7 ++-----
 arch/x86/kernel/cpu/cacheinfo.c |  7 ++-----
 include/linux/cacheinfo.h       | 18 ------------------
 5 files changed, 8 insertions(+), 38 deletions(-)

diff --git a/arch/arm64/kernel/cacheinfo.c b/arch/arm64/kernel/cacheinfo.c
index 7fa6828bb488..587543c6c51c 100644
--- a/arch/arm64/kernel/cacheinfo.c
+++ b/arch/arm64/kernel/cacheinfo.c
@@ -43,7 +43,7 @@ static void ci_leaf_init(struct cacheinfo *this_leaf,
 	this_leaf->type = type;
 }
 
-static int __init_cache_level(unsigned int cpu)
+int init_cache_level(unsigned int cpu)
 {
 	unsigned int ctype, level, leaves, fw_level;
 	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
@@ -78,7 +78,7 @@ static int __init_cache_level(unsigned int cpu)
 	return 0;
 }
 
-static int __populate_cache_leaves(unsigned int cpu)
+int populate_cache_leaves(unsigned int cpu)
 {
 	unsigned int level, idx;
 	enum cache_type type;
@@ -97,6 +97,3 @@ static int __populate_cache_leaves(unsigned int cpu)
 	}
 	return 0;
 }
-
-DEFINE_SMP_CALL_CACHE_FUNCTION(init_cache_level)
-DEFINE_SMP_CALL_CACHE_FUNCTION(populate_cache_leaves)
diff --git a/arch/mips/kernel/cacheinfo.c b/arch/mips/kernel/cacheinfo.c
index 47312c529410..529dab855aac 100644
--- a/arch/mips/kernel/cacheinfo.c
+++ b/arch/mips/kernel/cacheinfo.c
@@ -17,7 +17,7 @@ do {								\
 	leaf++;							\
 } while (0)
 
-static int __init_cache_level(unsigned int cpu)
+int init_cache_level(unsigned int cpu)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
@@ -69,7 +69,7 @@ static void fill_cpumask_cluster(int cpu, cpumask_t *cpu_map)
 			cpumask_set_cpu(cpu1, cpu_map);
 }
 
-static int __populate_cache_leaves(unsigned int cpu)
+int populate_cache_leaves(unsigned int cpu)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
@@ -98,6 +98,3 @@ static int __populate_cache_leaves(unsigned int cpu)
 
 	return 0;
 }
-
-DEFINE_SMP_CALL_CACHE_FUNCTION(init_cache_level)
-DEFINE_SMP_CALL_CACHE_FUNCTION(populate_cache_leaves)
diff --git a/arch/riscv/kernel/cacheinfo.c b/arch/riscv/kernel/cacheinfo.c
index 4c90c07d8c39..d930bd073b7b 100644
--- a/arch/riscv/kernel/cacheinfo.c
+++ b/arch/riscv/kernel/cacheinfo.c
@@ -16,7 +16,7 @@ static void ci_leaf_init(struct cacheinfo *this_leaf,
 	this_leaf->type = type;
 }
 
-static int __init_cache_level(unsigned int cpu)
+int init_cache_level(unsigned int cpu)
 {
 	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
 	struct device_node *np = of_cpu_device_node_get(cpu);
@@ -58,7 +58,7 @@ static int __init_cache_level(unsigned int cpu)
 	return 0;
 }
 
-static int __populate_cache_leaves(unsigned int cpu)
+int populate_cache_leaves(unsigned int cpu)
 {
 	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
 	struct cacheinfo *this_leaf = this_cpu_ci->info_list;
@@ -95,6 +95,3 @@ static int __populate_cache_leaves(unsigned int cpu)
 
 	return 0;
 }
-
-DEFINE_SMP_CALL_CACHE_FUNCTION(init_cache_level)
-DEFINE_SMP_CALL_CACHE_FUNCTION(populate_cache_leaves)
diff --git a/arch/x86/kernel/cpu/cacheinfo.c b/arch/x86/kernel/cpu/cacheinfo.c
index 30f33b75209a..cae566567e15 100644
--- a/arch/x86/kernel/cpu/cacheinfo.c
+++ b/arch/x86/kernel/cpu/cacheinfo.c
@@ -985,7 +985,7 @@ static void ci_leaf_init(struct cacheinfo *this_leaf,
 	this_leaf->priv = base->nb;
 }
 
-static int __init_cache_level(unsigned int cpu)
+int init_cache_level(unsigned int cpu)
 {
 	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
 
@@ -1014,7 +1014,7 @@ static void get_cache_id(int cpu, struct _cpuid4_info_regs *id4_regs)
 	id4_regs->id = c->apicid >> index_msb;
 }
 
-static int __populate_cache_leaves(unsigned int cpu)
+int populate_cache_leaves(unsigned int cpu)
 {
 	unsigned int idx, ret;
 	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
@@ -1033,6 +1033,3 @@ static int __populate_cache_leaves(unsigned int cpu)
 
 	return 0;
 }
-
-DEFINE_SMP_CALL_CACHE_FUNCTION(init_cache_level)
-DEFINE_SMP_CALL_CACHE_FUNCTION(populate_cache_leaves)
diff --git a/include/linux/cacheinfo.h b/include/linux/cacheinfo.h
index 46b92cd61d0c..c8c71eea237d 100644
--- a/include/linux/cacheinfo.h
+++ b/include/linux/cacheinfo.h
@@ -78,24 +78,6 @@ struct cpu_cacheinfo {
 	bool cpu_map_populated;
 };
 
-/*
- * Helpers to make sure "func" is executed on the cpu whose cache
- * attributes are being detected
- */
-#define DEFINE_SMP_CALL_CACHE_FUNCTION(func)			\
-static inline void _##func(void *ret)				\
-{								\
-	int cpu = smp_processor_id();				\
-	*(int *)ret = __##func(cpu);				\
-}								\
-								\
-int func(unsigned int cpu)					\
-{								\
-	int ret;						\
-	smp_call_function_single(cpu, _##func, &ret, true);	\
-	return ret;						\
-}
-
 struct cpu_cacheinfo *get_cpu_cacheinfo(unsigned int cpu);
 int init_cache_level(unsigned int cpu);
 int populate_cache_leaves(unsigned int cpu);
-- 
2.33.0

[PATCH 5.4 32/50] parisc: Move pci_dev_is_behind_card_dino to where it is used

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 907872baa9f1538eed02ec737b8e89eba6c6e4b9 ]

parisc build test images fail to compile with the following error.

drivers/parisc/dino.c:160:12: error:
	'pci_dev_is_behind_card_dino' defined but not used

Move the function just ahead of its only caller to avoid the error.

Fixes: 5fa1659105fa ("parisc: Disable HP HSC-PCI Cards to prevent kernel crash")
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/parisc/dino.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index 2f1cac89ddf5..544287e9f449 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -156,15 +156,6 @@ static inline struct dino_device *DINO_DEV(struct pci_hba_data *hba)
 	return container_of(hba, struct dino_device, hba);
 }
 
-/* Check if PCI device is behind a Card-mode Dino. */
-static int pci_dev_is_behind_card_dino(struct pci_dev *dev)
-{
-	struct dino_device *dino_dev;
-
-	dino_dev = DINO_DEV(parisc_walk_tree(dev->bus->bridge));
-	return is_card_dino(&dino_dev->hba.dev->id);
-}
-
 /*
  * Dino Configuration Space Accessor Functions
  */
@@ -447,6 +438,15 @@ static void quirk_cirrus_cardbus(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_6832, quirk_cirrus_cardbus );
 
 #ifdef CONFIG_TULIP
+/* Check if PCI device is behind a Card-mode Dino. */
+static int pci_dev_is_behind_card_dino(struct pci_dev *dev)
+{
+	struct dino_device *dino_dev;
+
+	dino_dev = DINO_DEV(parisc_walk_tree(dev->bus->bridge));
+	return is_card_dino(&dino_dev->hba.dev->id);
+}
+
 static void pci_fixup_tulip(struct pci_dev *dev)
 {
 	if (!pci_dev_is_behind_card_dino(dev))
-- 
2.33.0

[PATCH 5.4 33/50] dmaengine: sprd: Add missing MODULE_DEVICE_TABLE

[Greg Kroah-Hartman]

From: Zou Wei <zou_wei@huawei.com>

[ Upstream commit 4faee8b65ec32346f8096e64c5fa1d5a73121742 ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/1620094977-70146-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/sprd-dma.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 8546ad034720..b966115bfad1 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -1230,6 +1230,7 @@ static const struct of_device_id sprd_dma_match[] = {
 	{ .compatible = "sprd,sc9860-dma", },
 	{},
 };
+MODULE_DEVICE_TABLE(of, sprd_dma_match);
 
 static int __maybe_unused sprd_dma_runtime_suspend(struct device *dev)
 {
-- 
2.33.0

[PATCH 5.4 34/50] dmaengine: ioat: depends on !UML

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit bbac7a92a46f0876e588722ebe552ddfe6fd790f ]

Now that UML has PCI support, this driver must depend also on
!UML since it pokes at X86_64 architecture internals that don't
exist on ARCH=um.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20210809112409.a3a0974874d2.I2ffe3d11ed37f735da2f39884a74c953b258b995@changeid
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index a32d0d715247..1322461f1f3c 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -276,7 +276,7 @@ config INTEL_IDMA64
 
 config INTEL_IOATDMA
 	tristate "Intel I/OAT DMA support"
-	depends on PCI && X86_64
+	depends on PCI && X86_64 && !UML
 	select DMA_ENGINE
 	select DMA_ENGINE_RAID
 	select DCA
-- 
2.33.0

[PATCH 5.4 35/50] dmaengine: xilinx_dma: Set DMA mask for coherent APIs

[Greg Kroah-Hartman]

From: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>

[ Upstream commit aac6c0f90799d66b8989be1e056408f33fd99fe6 ]

The xilinx dma driver uses the consistent allocations, so for correct
operation also set the DMA mask for coherent APIs. It fixes the below
kernel crash with dmatest client when DMA IP is configured with 64-bit
address width and linux is booted from high (>4GB) memory.

Call trace:
[  489.531257]  dma_alloc_from_pool+0x8c/0x1c0
[  489.535431]  dma_direct_alloc+0x284/0x330
[  489.539432]  dma_alloc_attrs+0x80/0xf0
[  489.543174]  dma_pool_alloc+0x160/0x2c0
[  489.547003]  xilinx_cdma_prep_memcpy+0xa4/0x180
[  489.551524]  dmatest_func+0x3cc/0x114c
[  489.555266]  kthread+0x124/0x130
[  489.558486]  ret_from_fork+0x10/0x3c
[  489.562051] ---[ end trace 248625b2d596a90a ]---

Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Harini Katakam <harini.katakam@xilinx.com>
Link: https://lore.kernel.org/r/1629363528-30347-1-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/xilinx/xilinx_dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index ce18bca45ff2..7729b8d22553 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -2703,7 +2703,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 		xdev->ext_addr = false;
 
 	/* Set the dma mask bits */
-	dma_set_mask(xdev->dev, DMA_BIT_MASK(addr_width));
+	dma_set_mask_and_coherent(xdev->dev, DMA_BIT_MASK(addr_width));
 
 	/* Initialize the DMA engine */
 	xdev->common.dev = &pdev->dev;
-- 
2.33.0

[PATCH 5.4 36/50] ceph: request Fw caps before updating the mtime in ceph_write_iter

[Greg Kroah-Hartman]

From: Jeff Layton <jlayton@kernel.org>

[ Upstream commit b11ed50346683a749632ea664959b28d524d7395 ]

The current code will update the mtime and then try to get caps to
handle the write. If we end up having to request caps from the MDS, then
the mtime in the cap grant will clobber the updated mtime and it'll be
lost.

This is most noticable when two clients are alternately writing to the
same file. Fw caps are continually being granted and revoked, and the
mtime ends up stuck because the updated mtimes are always being
overwritten with the old one.

Fix this by changing the order of operations in ceph_write_iter to get
the caps before updating the times. Also, make sure we check the pool
full conditions before even getting any caps or uninlining.

URL: https://tracker.ceph.com/issues/46574
Reported-by: Jozef Kováč <kovac@firma.zoznam.sk>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ceph/file.c | 32 +++++++++++++++++---------------
 1 file changed, 17 insertions(+), 15 deletions(-)

diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index a10711a6337a..34785a203461 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -1469,32 +1469,26 @@ retry_snap:
 		goto out;
 	}
 
-	err = file_remove_privs(file);
-	if (err)
+	down_read(&osdc->lock);
+	map_flags = osdc->osdmap->flags;
+	pool_flags = ceph_pg_pool_flags(osdc->osdmap, ci->i_layout.pool_id);
+	up_read(&osdc->lock);
+	if ((map_flags & CEPH_OSDMAP_FULL) ||
+	    (pool_flags & CEPH_POOL_FLAG_FULL)) {
+		err = -ENOSPC;
 		goto out;
+	}
 
-	err = file_update_time(file);
+	err = file_remove_privs(file);
 	if (err)
 		goto out;
 
-	inode_inc_iversion_raw(inode);
-
 	if (ci->i_inline_version != CEPH_INLINE_NONE) {
 		err = ceph_uninline_data(file, NULL);
 		if (err < 0)
 			goto out;
 	}
 
-	down_read(&osdc->lock);
-	map_flags = osdc->osdmap->flags;
-	pool_flags = ceph_pg_pool_flags(osdc->osdmap, ci->i_layout.pool_id);
-	up_read(&osdc->lock);
-	if ((map_flags & CEPH_OSDMAP_FULL) ||
-	    (pool_flags & CEPH_POOL_FLAG_FULL)) {
-		err = -ENOSPC;
-		goto out;
-	}
-
 	dout("aio_write %p %llx.%llx %llu~%zd getting caps. i_size %llu\n",
 	     inode, ceph_vinop(inode), pos, count, i_size_read(inode));
 	if (fi->fmode & CEPH_FILE_MODE_LAZY)
@@ -1507,6 +1501,12 @@ retry_snap:
 	if (err < 0)
 		goto out;
 
+	err = file_update_time(file);
+	if (err)
+		goto out_caps;
+
+	inode_inc_iversion_raw(inode);
+
 	dout("aio_write %p %llx.%llx %llu~%zd got cap refs on %s\n",
 	     inode, ceph_vinop(inode), pos, count, ceph_cap_string(got));
 
@@ -1590,6 +1590,8 @@ retry_snap:
 	}
 
 	goto out_unlocked;
+out_caps:
+	ceph_put_cap_refs(ci, got);
 out:
 	if (direct_lock)
 		ceph_end_io_direct(inode);
-- 
2.33.0

[PATCH 5.4 37/50] ceph: lockdep annotations for try_nonblocking_invalidate

[Greg Kroah-Hartman]

From: Jeff Layton <jlayton@kernel.org>

[ Upstream commit 3eaf5aa1cfa8c97c72f5824e2e9263d6cc977b03 ]

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ceph/caps.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index a49bf1fbaea8..0fad044a5752 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -1775,6 +1775,8 @@ static u64 __mark_caps_flushing(struct inode *inode,
  * try to invalidate mapping pages without blocking.
  */
 static int try_nonblocking_invalidate(struct inode *inode)
+	__releases(ci->i_ceph_lock)
+	__acquires(ci->i_ceph_lock)
 {
 	struct ceph_inode_info *ci = ceph_inode(inode);
 	u32 invalidating_gen = ci->i_rdcache_gen;
-- 
2.33.0

[PATCH 5.4 38/50] btrfs: fix lockdep warning while mounting sprout fs

[Greg Kroah-Hartman]

From: Anand Jain <anand.jain@oracle.com>

[ Upstream commit c124706900c20dee70f921bb3a90492431561a0a ]

Following test case reproduces lockdep warning.

  Test case:

  $ mkfs.btrfs -f <dev1>
  $ btrfstune -S 1 <dev1>
  $ mount <dev1> <mnt>
  $ btrfs device add <dev2> <mnt> -f
  $ umount <mnt>
  $ mount <dev2> <mnt>
  $ umount <mnt>

The warning claims a possible ABBA deadlock between the threads
initiated by [#1] btrfs device add and [#0] the mount.

  [ 540.743122] WARNING: possible circular locking dependency detected
  [ 540.743129] 5.11.0-rc7+ #5 Not tainted
  [ 540.743135] ------------------------------------------------------
  [ 540.743142] mount/2515 is trying to acquire lock:
  [ 540.743149] ffffa0c5544c2ce0 (&fs_devs->device_list_mutex){+.+.}-{4:4}, at: clone_fs_devices+0x6d/0x210 [btrfs]
  [ 540.743458] but task is already holding lock:
  [ 540.743461] ffffa0c54a7932b8 (btrfs-chunk-00){++++}-{4:4}, at: __btrfs_tree_read_lock+0x32/0x200 [btrfs]
  [ 540.743541] which lock already depends on the new lock.
  [ 540.743543] the existing dependency chain (in reverse order) is:

  [ 540.743546] -> #1 (btrfs-chunk-00){++++}-{4:4}:
  [ 540.743566] down_read_nested+0x48/0x2b0
  [ 540.743585] __btrfs_tree_read_lock+0x32/0x200 [btrfs]
  [ 540.743650] btrfs_read_lock_root_node+0x70/0x200 [btrfs]
  [ 540.743733] btrfs_search_slot+0x6c6/0xe00 [btrfs]
  [ 540.743785] btrfs_update_device+0x83/0x260 [btrfs]
  [ 540.743849] btrfs_finish_chunk_alloc+0x13f/0x660 [btrfs] <--- device_list_mutex
  [ 540.743911] btrfs_create_pending_block_groups+0x18d/0x3f0 [btrfs]
  [ 540.743982] btrfs_commit_transaction+0x86/0x1260 [btrfs]
  [ 540.744037] btrfs_init_new_device+0x1600/0x1dd0 [btrfs]
  [ 540.744101] btrfs_ioctl+0x1c77/0x24c0 [btrfs]
  [ 540.744166] __x64_sys_ioctl+0xe4/0x140
  [ 540.744170] do_syscall_64+0x4b/0x80
  [ 540.744174] entry_SYSCALL_64_after_hwframe+0x44/0xa9

  [ 540.744180] -> #0 (&fs_devs->device_list_mutex){+.+.}-{4:4}:
  [ 540.744184] __lock_acquire+0x155f/0x2360
  [ 540.744188] lock_acquire+0x10b/0x5c0
  [ 540.744190] __mutex_lock+0xb1/0xf80
  [ 540.744193] mutex_lock_nested+0x27/0x30
  [ 540.744196] clone_fs_devices+0x6d/0x210 [btrfs]
  [ 540.744270] btrfs_read_chunk_tree+0x3c7/0xbb0 [btrfs]
  [ 540.744336] open_ctree+0xf6e/0x2074 [btrfs]
  [ 540.744406] btrfs_mount_root.cold.72+0x16/0x127 [btrfs]
  [ 540.744472] legacy_get_tree+0x38/0x90
  [ 540.744475] vfs_get_tree+0x30/0x140
  [ 540.744478] fc_mount+0x16/0x60
  [ 540.744482] vfs_kern_mount+0x91/0x100
  [ 540.744484] btrfs_mount+0x1e6/0x670 [btrfs]
  [ 540.744536] legacy_get_tree+0x38/0x90
  [ 540.744537] vfs_get_tree+0x30/0x140
  [ 540.744539] path_mount+0x8d8/0x1070
  [ 540.744541] do_mount+0x8d/0xc0
  [ 540.744543] __x64_sys_mount+0x125/0x160
  [ 540.744545] do_syscall_64+0x4b/0x80
  [ 540.744547] entry_SYSCALL_64_after_hwframe+0x44/0xa9

  [ 540.744551] other info that might help us debug this:
  [ 540.744552] Possible unsafe locking scenario:

  [ 540.744553] CPU0 				CPU1
  [ 540.744554] ---- 				----
  [ 540.744555] lock(btrfs-chunk-00);
  [ 540.744557] 					lock(&fs_devs->device_list_mutex);
  [ 540.744560] 					lock(btrfs-chunk-00);
  [ 540.744562] lock(&fs_devs->device_list_mutex);
  [ 540.744564]
   *** DEADLOCK ***

  [ 540.744565] 3 locks held by mount/2515:
  [ 540.744567] #0: ffffa0c56bf7a0e0 (&type->s_umount_key#42/1){+.+.}-{4:4}, at: alloc_super.isra.16+0xdf/0x450
  [ 540.744574] #1: ffffffffc05a9628 (uuid_mutex){+.+.}-{4:4}, at: btrfs_read_chunk_tree+0x63/0xbb0 [btrfs]
  [ 540.744640] #2: ffffa0c54a7932b8 (btrfs-chunk-00){++++}-{4:4}, at: __btrfs_tree_read_lock+0x32/0x200 [btrfs]
  [ 540.744708]
   stack backtrace:
  [ 540.744712] CPU: 2 PID: 2515 Comm: mount Not tainted 5.11.0-rc7+ #5

But the device_list_mutex in clone_fs_devices() is redundant, as
explained below.  Two threads [1]  and [2] (below) could lead to
clone_fs_device().

  [1]
  open_ctree <== mount sprout fs
   btrfs_read_chunk_tree()
    mutex_lock(&uuid_mutex) <== global lock
    read_one_dev()
     open_seed_devices()
      clone_fs_devices() <== seed fs_devices
       mutex_lock(&orig->device_list_mutex) <== seed fs_devices

  [2]
  btrfs_init_new_device() <== sprouting
   mutex_lock(&uuid_mutex); <== global lock
   btrfs_prepare_sprout()
     lockdep_assert_held(&uuid_mutex)
     clone_fs_devices(seed_fs_device) <== seed fs_devices

Both of these threads hold uuid_mutex which is sufficient to protect
getting the seed device(s) freed while we are trying to clone it for
sprouting [2] or mounting a sprout [1] (as above). A mounted seed device
can not free/write/replace because it is read-only. An unmounted seed
device can be freed by btrfs_free_stale_devices(), but it needs
uuid_mutex.  So this patch removes the unnecessary device_list_mutex in
clone_fs_devices().  And adds a lockdep_assert_held(&uuid_mutex) in
clone_fs_devices().

Reported-by: Su Yue <l@damenly.su>
Tested-by: Su Yue <l@damenly.su>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/volumes.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 8deee49a6b3f..f302bbb93f32 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -742,6 +742,8 @@ static int btrfs_free_stale_devices(const char *path,
 	struct btrfs_device *device, *tmp_device;
 	int ret = 0;
 
+	lockdep_assert_held(&uuid_mutex);
+
 	if (path)
 		ret = -ENOENT;
 
@@ -1181,11 +1183,12 @@ static struct btrfs_fs_devices *clone_fs_devices(struct btrfs_fs_devices *orig)
 	struct btrfs_device *orig_dev;
 	int ret = 0;
 
+	lockdep_assert_held(&uuid_mutex);
+
 	fs_devices = alloc_fs_devices(orig->fsid, NULL);
 	if (IS_ERR(fs_devices))
 		return fs_devices;
 
-	mutex_lock(&orig->device_list_mutex);
 	fs_devices->total_devices = orig->total_devices;
 
 	list_for_each_entry(orig_dev, &orig->devices, dev_list) {
@@ -1217,10 +1220,8 @@ static struct btrfs_fs_devices *clone_fs_devices(struct btrfs_fs_devices *orig)
 		device->fs_devices = fs_devices;
 		fs_devices->num_devices++;
 	}
-	mutex_unlock(&orig->device_list_mutex);
 	return fs_devices;
 error:
-	mutex_unlock(&orig->device_list_mutex);
 	free_fs_devices(fs_devices);
 	return ERR_PTR(ret);
 }
-- 
2.33.0

[PATCH 5.4 39/50] nilfs2: fix memory leak in nilfs_sysfs_create_device_group

[Greg Kroah-Hartman]

From: Nanyong Sun <sunnanyong@huawei.com>

[ Upstream commit 5f5dec07aca7067216ed4c1342e464e7307a9197 ]

Patch series "nilfs2: fix incorrect usage of kobject".

This patchset from Nanyong Sun fixes memory leak issues and a NULL
pointer dereference issue caused by incorrect usage of kboject in nilfs2
sysfs implementation.

This patch (of 6):

Reported by syzkaller:

  BUG: memory leak
  unreferenced object 0xffff888100ca8988 (size 8):
  comm "syz-executor.1", pid 1930, jiffies 4294745569 (age 18.052s)
  hex dump (first 8 bytes):
  6c 6f 6f 70 31 00 ff ff loop1...
  backtrace:
    kstrdup+0x36/0x70 mm/util.c:60
    kstrdup_const+0x35/0x60 mm/util.c:83
    kvasprintf_const+0xf1/0x180 lib/kasprintf.c:48
    kobject_set_name_vargs+0x56/0x150 lib/kobject.c:289
    kobject_add_varg lib/kobject.c:384 [inline]
    kobject_init_and_add+0xc9/0x150 lib/kobject.c:473
    nilfs_sysfs_create_device_group+0x150/0x7d0 fs/nilfs2/sysfs.c:986
    init_nilfs+0xa21/0xea0 fs/nilfs2/the_nilfs.c:637
    nilfs_fill_super fs/nilfs2/super.c:1046 [inline]
    nilfs_mount+0x7b4/0xe80 fs/nilfs2/super.c:1316
    legacy_get_tree+0x105/0x210 fs/fs_context.c:592
    vfs_get_tree+0x8e/0x2d0 fs/super.c:1498
    do_new_mount fs/namespace.c:2905 [inline]
    path_mount+0xf9b/0x1990 fs/namespace.c:3235
    do_mount+0xea/0x100 fs/namespace.c:3248
    __do_sys_mount fs/namespace.c:3456 [inline]
    __se_sys_mount fs/namespace.c:3433 [inline]
    __x64_sys_mount+0x14b/0x1f0 fs/namespace.c:3433
    do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
    entry_SYSCALL_64_after_hwframe+0x44/0xae

If kobject_init_and_add return with error, then the cleanup of kobject
is needed because memory may be allocated in kobject_init_and_add
without freeing.

And the place of cleanup_dev_kobject should use kobject_put to free the
memory associated with the kobject.  As the section "Kobject removal" of
"Documentation/core-api/kobject.rst" says, kobject_del() just makes the
kobject "invisible", but it is not cleaned up.  And no more cleanup will
do after cleanup_dev_kobject, so kobject_put is needed here.

Link: https://lkml.kernel.org/r/1625651306-10829-1-git-send-email-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/1625651306-10829-2-git-send-email-konishi.ryusuke@gmail.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Link: https://lkml.kernel.org/r/20210629022556.3985106-2-sunnanyong@huawei.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nilfs2/sysfs.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/fs/nilfs2/sysfs.c b/fs/nilfs2/sysfs.c
index c6c8a33c81d5..cbfc132206e8 100644
--- a/fs/nilfs2/sysfs.c
+++ b/fs/nilfs2/sysfs.c
@@ -1000,7 +1000,7 @@ int nilfs_sysfs_create_device_group(struct super_block *sb)
 	err = kobject_init_and_add(&nilfs->ns_dev_kobj, &nilfs_dev_ktype, NULL,
 				    "%s", sb->s_id);
 	if (err)
-		goto free_dev_subgroups;
+		goto cleanup_dev_kobject;
 
 	err = nilfs_sysfs_create_mounted_snapshots_group(nilfs);
 	if (err)
@@ -1037,9 +1037,7 @@ delete_mounted_snapshots_group:
 	nilfs_sysfs_delete_mounted_snapshots_group(nilfs);
 
 cleanup_dev_kobject:
-	kobject_del(&nilfs->ns_dev_kobj);
-
-free_dev_subgroups:
+	kobject_put(&nilfs->ns_dev_kobj);
 	kfree(nilfs->ns_dev_subgroups);
 
 failed_create_device_group:
-- 
2.33.0

[PATCH 5.4 40/50] nilfs2: fix NULL pointer in nilfs_##name##_attr_release

[Greg Kroah-Hartman]

From: Nanyong Sun <sunnanyong@huawei.com>

[ Upstream commit dbc6e7d44a514f231a64d9d5676e001b660b6448 ]

In nilfs_##name##_attr_release, kobj->parent should not be referenced
because it is a NULL pointer.  The release() method of kobject is always
called in kobject_put(kobj), in the implementation of kobject_put(), the
kobj->parent will be assigned as NULL before call the release() method.
So just use kobj to get the subgroups, which is more efficient and can fix
a NULL pointer reference problem.

Link: https://lkml.kernel.org/r/20210629022556.3985106-3-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-3-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nilfs2/sysfs.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/fs/nilfs2/sysfs.c b/fs/nilfs2/sysfs.c
index cbfc132206e8..ca720d958315 100644
--- a/fs/nilfs2/sysfs.c
+++ b/fs/nilfs2/sysfs.c
@@ -64,11 +64,9 @@ static const struct sysfs_ops nilfs_##name##_attr_ops = { \
 #define NILFS_DEV_INT_GROUP_TYPE(name, parent_name) \
 static void nilfs_##name##_attr_release(struct kobject *kobj) \
 { \
-	struct nilfs_sysfs_##parent_name##_subgroups *subgroups; \
-	struct the_nilfs *nilfs = container_of(kobj->parent, \
-						struct the_nilfs, \
-						ns_##parent_name##_kobj); \
-	subgroups = nilfs->ns_##parent_name##_subgroups; \
+	struct nilfs_sysfs_##parent_name##_subgroups *subgroups = container_of(kobj, \
+						struct nilfs_sysfs_##parent_name##_subgroups, \
+						sg_##name##_kobj); \
 	complete(&subgroups->sg_##name##_kobj_unregister); \
 } \
 static struct kobj_type nilfs_##name##_ktype = { \
-- 
2.33.0

[PATCH 5.4 41/50] nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group

[Greg Kroah-Hartman]

From: Nanyong Sun <sunnanyong@huawei.com>

[ Upstream commit 24f8cb1ed057c840728167dab33b32e44147c86f ]

If kobject_init_and_add return with error, kobject_put() is needed here to
avoid memory leak, because kobject_init_and_add may return error without
freeing the memory associated with the kobject it allocated.

Link: https://lkml.kernel.org/r/20210629022556.3985106-4-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-4-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nilfs2/sysfs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/nilfs2/sysfs.c b/fs/nilfs2/sysfs.c
index ca720d958315..31d640a87b59 100644
--- a/fs/nilfs2/sysfs.c
+++ b/fs/nilfs2/sysfs.c
@@ -92,8 +92,8 @@ static int nilfs_sysfs_create_##name##_group(struct the_nilfs *nilfs) \
 	err = kobject_init_and_add(kobj, &nilfs_##name##_ktype, parent, \
 				    #name); \
 	if (err) \
-		return err; \
-	return 0; \
+		kobject_put(kobj); \
+	return err; \
 } \
 static void nilfs_sysfs_delete_##name##_group(struct the_nilfs *nilfs) \
 { \
-- 
2.33.0

[PATCH 5.4 42/50] nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group

[Greg Kroah-Hartman]

From: Nanyong Sun <sunnanyong@huawei.com>

[ Upstream commit a3e181259ddd61fd378390977a1e4e2316853afa ]

The kobject_put() should be used to cleanup the memory associated with the
kobject instead of kobject_del.  See the section "Kobject removal" of
"Documentation/core-api/kobject.rst".

Link: https://lkml.kernel.org/r/20210629022556.3985106-5-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-5-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nilfs2/sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nilfs2/sysfs.c b/fs/nilfs2/sysfs.c
index 31d640a87b59..195f42192a15 100644
--- a/fs/nilfs2/sysfs.c
+++ b/fs/nilfs2/sysfs.c
@@ -97,7 +97,7 @@ static int nilfs_sysfs_create_##name##_group(struct the_nilfs *nilfs) \
 } \
 static void nilfs_sysfs_delete_##name##_group(struct the_nilfs *nilfs) \
 { \
-	kobject_del(&nilfs->ns_##parent_name##_subgroups->sg_##name##_kobj); \
+	kobject_put(&nilfs->ns_##parent_name##_subgroups->sg_##name##_kobj); \
 }
 
 /************************************************************************
-- 
2.33.0

[PATCH 5.4 43/50] nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group

[Greg Kroah-Hartman]

From: Nanyong Sun <sunnanyong@huawei.com>

[ Upstream commit b2fe39c248f3fa4bbb2a20759b4fdd83504190f7 ]

If kobject_init_and_add returns with error, kobject_put() is needed here
to avoid memory leak, because kobject_init_and_add may return error
without freeing the memory associated with the kobject it allocated.

Link: https://lkml.kernel.org/r/20210629022556.3985106-6-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-6-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nilfs2/sysfs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/nilfs2/sysfs.c b/fs/nilfs2/sysfs.c
index 195f42192a15..6c92ac314b06 100644
--- a/fs/nilfs2/sysfs.c
+++ b/fs/nilfs2/sysfs.c
@@ -208,9 +208,9 @@ int nilfs_sysfs_create_snapshot_group(struct nilfs_root *root)
 	}
 
 	if (err)
-		return err;
+		kobject_put(&root->snapshot_kobj);
 
-	return 0;
+	return err;
 }
 
 void nilfs_sysfs_delete_snapshot_group(struct nilfs_root *root)
-- 
2.33.0

[PATCH 5.4 44/50] nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group

[Greg Kroah-Hartman]

From: Nanyong Sun <sunnanyong@huawei.com>

[ Upstream commit 17243e1c3072b8417a5ebfc53065d0a87af7ca77 ]

kobject_put() should be used to cleanup the memory associated with the
kobject instead of kobject_del().  See the section "Kobject removal" of
"Documentation/core-api/kobject.rst".

Link: https://lkml.kernel.org/r/20210629022556.3985106-7-sunnanyong@huawei.com
Link: https://lkml.kernel.org/r/1625651306-10829-7-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nilfs2/sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nilfs2/sysfs.c b/fs/nilfs2/sysfs.c
index 6c92ac314b06..28a2db3b1787 100644
--- a/fs/nilfs2/sysfs.c
+++ b/fs/nilfs2/sysfs.c
@@ -215,7 +215,7 @@ int nilfs_sysfs_create_snapshot_group(struct nilfs_root *root)
 
 void nilfs_sysfs_delete_snapshot_group(struct nilfs_root *root)
 {
-	kobject_del(&root->snapshot_kobj);
+	kobject_put(&root->snapshot_kobj);
 }
 
 /************************************************************************
-- 
2.33.0

[PATCH 5.4 45/50] pwm: img: Dont modify HW state in .remove() callback

[Greg Kroah-Hartman]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit c68eb29c8e9067c08175dd0414f6984f236f719d ]

A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-img.c | 16 ----------------
 1 file changed, 16 deletions(-)

diff --git a/drivers/pwm/pwm-img.c b/drivers/pwm/pwm-img.c
index 22c002e685b3..37f9b688661d 100644
--- a/drivers/pwm/pwm-img.c
+++ b/drivers/pwm/pwm-img.c
@@ -329,23 +329,7 @@ err_pm_disable:
 static int img_pwm_remove(struct platform_device *pdev)
 {
 	struct img_pwm_chip *pwm_chip = platform_get_drvdata(pdev);
-	u32 val;
-	unsigned int i;
-	int ret;
-
-	ret = pm_runtime_get_sync(&pdev->dev);
-	if (ret < 0) {
-		pm_runtime_put(&pdev->dev);
-		return ret;
-	}
-
-	for (i = 0; i < pwm_chip->chip.npwm; i++) {
-		val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG);
-		val &= ~BIT(i);
-		img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val);
-	}
 
-	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	if (!pm_runtime_status_suspended(&pdev->dev))
 		img_pwm_runtime_suspend(&pdev->dev);
-- 
2.33.0

[PATCH 5.4 46/50] pwm: rockchip: Dont modify HW state in .remove() callback

[Greg Kroah-Hartman]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 9d768cd7fd42bb0be16f36aec48548fca5260759 ]

A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-rockchip.c | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
index 6ad6aad215cf..8c0af705c5ae 100644
--- a/drivers/pwm/pwm-rockchip.c
+++ b/drivers/pwm/pwm-rockchip.c
@@ -383,20 +383,6 @@ static int rockchip_pwm_remove(struct platform_device *pdev)
 {
 	struct rockchip_pwm_chip *pc = platform_get_drvdata(pdev);
 
-	/*
-	 * Disable the PWM clk before unpreparing it if the PWM device is still
-	 * running. This should only happen when the last PWM user left it
-	 * enabled, or when nobody requested a PWM that was previously enabled
-	 * by the bootloader.
-	 *
-	 * FIXME: Maybe the core should disable all PWM devices in
-	 * pwmchip_remove(). In this case we'd only have to call
-	 * clk_unprepare() after pwmchip_remove().
-	 *
-	 */
-	if (pwm_is_enabled(pc->chip.pwms))
-		clk_disable(pc->clk);
-
 	clk_unprepare(pc->pclk);
 	clk_unprepare(pc->clk);
 
-- 
2.33.0

[PATCH 5.4 47/50] pwm: stm32-lp: Dont modify HW state in .remove() callback

[Greg Kroah-Hartman]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit d44084c93427bb0a9261432db1a8ca76a42d805e ]

A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-stm32-lp.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/pwm/pwm-stm32-lp.c b/drivers/pwm/pwm-stm32-lp.c
index 67fca62524dc..05bb1f95a773 100644
--- a/drivers/pwm/pwm-stm32-lp.c
+++ b/drivers/pwm/pwm-stm32-lp.c
@@ -225,8 +225,6 @@ static int stm32_pwm_lp_remove(struct platform_device *pdev)
 {
 	struct stm32_pwm_lp *priv = platform_get_drvdata(pdev);
 
-	pwm_disable(&priv->chip.pwms[0]);
-
 	return pwmchip_remove(&priv->chip);
 }
 
-- 
2.33.0

[PATCH 5.4 48/50] blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()

[Greg Kroah-Hartman]

From: Li Jinlin <lijinlin3@huawei.com>

[ Upstream commit 884f0e84f1e3195b801319c8ec3d5774e9bf2710 ]

The pending timer has been set up in blk_throtl_init(). However, the
timer is not deleted in blk_throtl_exit(). This means that the timer
handler may still be running after freeing the timer, which would
result in a use-after-free.

Fix by calling del_timer_sync() to delete the timer in blk_throtl_exit().

Signed-off-by: Li Jinlin <lijinlin3@huawei.com>
Link: https://lore.kernel.org/r/20210907121242.2885564-1-lijinlin3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-throttle.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index 18f773e52dfb..bd870f9ae458 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -2414,6 +2414,7 @@ int blk_throtl_init(struct request_queue *q)
 void blk_throtl_exit(struct request_queue *q)
 {
 	BUG_ON(!q->td);
+	del_timer_sync(&q->td->service_queue.pending_timer);
 	throtl_shutdown_wq(q);
 	blkcg_deactivate_policy(q, &blkcg_policy_throtl);
 	free_percpu(q->td->latency_buckets[READ]);
-- 
2.33.0

[PATCH 5.4 49/50] rtc: rx8010: select REGMAP_I2C

[Greg Kroah-Hartman]

From: Yu-Tung Chang <mtwget@gmail.com>

[ Upstream commit 0c45d3e24ef3d3d87c5e0077b8f38d1372af7176 ]

The rtc-rx8010 uses the I2C regmap but doesn't select it in Kconfig so
depending on the configuration the build may fail. Fix it.

Signed-off-by: Yu-Tung Chang <mtwget@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210830052532.40356-1-mtwget@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 9ae7ce3f5069..0ad8d84aeb33 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -625,6 +625,7 @@ config RTC_DRV_FM3130
 
 config RTC_DRV_RX8010
 	tristate "Epson RX8010SJ"
+	select REGMAP_I2C
 	help
 	  If you say yes here you get support for the Epson RX8010SJ RTC
 	  chip.
-- 
2.33.0

[PATCH 5.4 50/50] drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

commit e8f71f89236ef82d449991bfbc237e3cb6ea584f upstream.

nvkm test builds fail with the following error.

  drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c: In function 'nvkm_control_mthd_pstate_info':
  drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c:60:35: error: overflow in conversion from 'int' to '__s8' {aka 'signed char'} changes value from '-251' to '5'

The code builds on most architectures, but fails on parisc where ENOSYS
is defined as 251.

Replace the error code with -ENODEV (-19).  The actual error code does
not really matter and is not passed to userspace - it just has to be
negative.

Fixes: 7238eca4cf18 ("drm/nouveau: expose pstate selection per-power source in sysfs")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c
@@ -57,7 +57,7 @@ nvkm_control_mthd_pstate_info(struct nvk
 		args->v0.count = 0;
 		args->v0.ustate_ac = NVIF_CONTROL_PSTATE_INFO_V0_USTATE_DISABLE;
 		args->v0.ustate_dc = NVIF_CONTROL_PSTATE_INFO_V0_USTATE_DISABLE;
-		args->v0.pwrsrc = -ENOSYS;
+		args->v0.pwrsrc = -ENODEV;
 		args->v0.pstate = NVIF_CONTROL_PSTATE_INFO_V0_PSTATE_UNKNOWN;
 	}
 

Re: [PATCH 5.4 00/50] 5.4.149-rc1 review

[Daniel Díaz]

Hello!

On 9/24/21 7:43 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.149 release.
> There are 50 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 26 Sep 2021 12:43:20 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.149-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

Regressions detected.

While building mxs_defconfig for arm with GCC 8, 9, 10 and 11, the following error was encountered:

   /builds/linux/arch/arm/mach-mxs/mach-mxs.c:285:26: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier]
     285 | static const struct gpio const tx28_gpios[] __initconst = {
         |                          ^~~~~
   /builds/linux/drivers/pwm/pwm-mxs.c: In function 'mxs_pwm_probe':
   /builds/linux/drivers/pwm/pwm-mxs.c:164:24: error: implicit declaration of function 'dev_err_probe'; did you mean 'device_reprobe'? [-Werror=implicit-function-declaration]
     164 |                 return dev_err_probe(&pdev->dev, ret, "failed to reset PWM\n");
         |                        ^~~~~~~~~~~~~
         |                        device_reprobe
   cc1: some warnings being treated as errors
   make[3]: *** [/builds/linux/scripts/Makefile.build:280: drivers/pwm/pwm-mxs.o] Error 1

The same problem is seen withs Clang 10, 11, 12, 13 and nightly:

   /builds/linux/drivers/pwm/pwm-mxs.c:156:10: error: implicit declaration of function 'dev_err_probe' [-Werror,-Wimplicit-function-declaration]
                   return dev_err_probe(&pdev->dev, ret, "failed to reset PWM\n");
                          ^
   /builds/linux/drivers/pwm/pwm-mxs.c:156:10: note: did you mean 'device_reprobe'?
   /builds/linux/include/linux/device.h:1565:25: note: 'device_reprobe' declared here
   extern int __must_check device_reprobe(struct device *dev);
                           ^
   1 error generated.
   make[3]: *** [/builds/linux/scripts/Makefile.build:262: drivers/pwm/pwm-mxs.o] Error 1

This is also seen in other branches (from 4.4 to 5.4). To reproduce this build locally:

   tuxmake \
     --target-arch=arm \
     --kconfig=mxs_defconfig \
     --toolchain=gcc-11 \
     --runtime=podman \
     config default kernel xipkernel modules dtbs dtbs-legacy debugkernel headers

or:

   tuxmake \
     --target-arch=arm \
     --kconfig=mxs_defconfig \
     --toolchain=clang-13 \
     --runtime=podman \
     config default kernel xipkernel modules dtbs dtbs-legacy debugkernel headers

Greetings!

Daniel Díaz
daniel.diaz@linaro.org

Re: [PATCH 5.4 00/50] 5.4.149-rc1 review

[Jon Hunter]

On Fri, 24 Sep 2021 14:43:49 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.149 release.
> There are 50 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 26 Sep 2021 12:43:20 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.149-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.4:
    10 builds:	10 pass, 0 fail
    26 boots:	26 pass, 0 fail
    59 tests:	59 pass, 0 fail

Linux version:	5.4.149-rc1-g0e003dbb1df4
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 5.4 00/50] 5.4.149-rc1 review

[Shuah Khan]

On 9/24/21 6:43 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.149 release.
> There are 50 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 26 Sep 2021 12:43:20 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.149-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.4 00/50] 5.4.149-rc1 review

[Florian Fainelli]

On 9/24/21 5:43 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.149 release.
> There are 50 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 26 Sep 2021 12:43:20 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.149-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h


On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian