* [PATCH 5.4 01/88] serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 02/88] ntfs: fix ntfs_test_inode and ntfs_init_locked_inode function type Greg Kroah-Hartman
` (93 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Patrik John
From: Patrik John <patrik.john@u-blox.com>
commit b40de7469ef135161c80af0e8c462298cc5dac00 upstream.
The current implementation uses 0 as lower limit for the baud rate
tolerance for tegra20 and tegra30 chips which causes isses on UART
initialization as soon as baud rate clock is lower than required even
when within the standard UART tolerance of +/- 4%.
This fix aligns the implementation with the initial commit description
of +/- 4% tolerance for tegra chips other than tegra186 and
tegra194.
Fixes: d781ec21bae6 ("serial: tegra: report clk rate errors")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Patrik John <patrik.john@u-blox.com>
Link: https://lore.kernel.org/r/sig.19614244f8.20211123132737.88341-1-patrik.john@u-blox.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/serial-tegra.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1494,7 +1494,7 @@ static struct tegra_uart_chip_data tegra
.fifo_mode_enable_status = false,
.uart_max_port = 5,
.max_dma_burst_bytes = 4,
- .error_tolerance_low_range = 0,
+ .error_tolerance_low_range = -4,
.error_tolerance_high_range = 4,
};
@@ -1505,7 +1505,7 @@ static struct tegra_uart_chip_data tegra
.fifo_mode_enable_status = false,
.uart_max_port = 5,
.max_dma_burst_bytes = 4,
- .error_tolerance_low_range = 0,
+ .error_tolerance_low_range = -4,
.error_tolerance_high_range = 4,
};
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 02/88] ntfs: fix ntfs_test_inode and ntfs_init_locked_inode function type
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 01/88] serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30 Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 03/88] HID: quirks: Add quirk for the Microsoft Surface 3 type-cover Greg Kroah-Hartman
` (92 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Luca Stefani, Andrew Morton, freak07,
Nick Desaulniers, Nathan Chancellor, Anton Altaparmakov,
Linus Torvalds, Mark-PK Tsai
From: Luca Stefani <luca.stefani.ge1@gmail.com>
commit 1146f7e2dc15a227a7e1ef9a1fb67182b25e687f upstream.
Clang's Control Flow Integrity (CFI) is a security mechanism that can help
prevent JOP chains, deployed extensively in downstream kernels used in
Android.
Its deployment is hindered by mismatches in function signatures. For this
case, we make callbacks match their intended function signature, and cast
parameters within them rather than casting the callback when passed as a
parameter.
When running `mount -t ntfs ...` we observe the following trace:
Call trace:
__cfi_check_fail+0x1c/0x24
name_to_dev_t+0x0/0x404
iget5_locked+0x594/0x5e8
ntfs_fill_super+0xbfc/0x43ec
mount_bdev+0x30c/0x3cc
ntfs_mount+0x18/0x24
mount_fs+0x1b0/0x380
vfs_kern_mount+0x90/0x398
do_mount+0x5d8/0x1a10
SyS_mount+0x108/0x144
el0_svc_naked+0x34/0x38
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: freak07 <michalechner92@googlemail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Anton Altaparmakov <anton@tuxera.com>
Link: http://lkml.kernel.org/r/20200718112513.533800-1-luca.stefani.ge1@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ntfs/dir.c | 2 +-
fs/ntfs/inode.c | 27 ++++++++++++++-------------
fs/ntfs/inode.h | 4 +---
fs/ntfs/mft.c | 4 ++--
4 files changed, 18 insertions(+), 19 deletions(-)
--- a/fs/ntfs/dir.c
+++ b/fs/ntfs/dir.c
@@ -1503,7 +1503,7 @@ static int ntfs_dir_fsync(struct file *f
na.type = AT_BITMAP;
na.name = I30;
na.name_len = 4;
- bmp_vi = ilookup5(vi->i_sb, vi->i_ino, (test_t)ntfs_test_inode, &na);
+ bmp_vi = ilookup5(vi->i_sb, vi->i_ino, ntfs_test_inode, &na);
if (bmp_vi) {
write_inode_now(bmp_vi, !datasync);
iput(bmp_vi);
--- a/fs/ntfs/inode.c
+++ b/fs/ntfs/inode.c
@@ -30,10 +30,10 @@
/**
* ntfs_test_inode - compare two (possibly fake) inodes for equality
* @vi: vfs inode which to test
- * @na: ntfs attribute which is being tested with
+ * @data: data which is being tested with
*
* Compare the ntfs attribute embedded in the ntfs specific part of the vfs
- * inode @vi for equality with the ntfs attribute @na.
+ * inode @vi for equality with the ntfs attribute @data.
*
* If searching for the normal file/directory inode, set @na->type to AT_UNUSED.
* @na->name and @na->name_len are then ignored.
@@ -43,8 +43,9 @@
* NOTE: This function runs with the inode_hash_lock spin lock held so it is not
* allowed to sleep.
*/
-int ntfs_test_inode(struct inode *vi, ntfs_attr *na)
+int ntfs_test_inode(struct inode *vi, void *data)
{
+ ntfs_attr *na = (ntfs_attr *)data;
ntfs_inode *ni;
if (vi->i_ino != na->mft_no)
@@ -72,9 +73,9 @@ int ntfs_test_inode(struct inode *vi, nt
/**
* ntfs_init_locked_inode - initialize an inode
* @vi: vfs inode to initialize
- * @na: ntfs attribute which to initialize @vi to
+ * @data: data which to initialize @vi to
*
- * Initialize the vfs inode @vi with the values from the ntfs attribute @na in
+ * Initialize the vfs inode @vi with the values from the ntfs attribute @data in
* order to enable ntfs_test_inode() to do its work.
*
* If initializing the normal file/directory inode, set @na->type to AT_UNUSED.
@@ -87,8 +88,9 @@ int ntfs_test_inode(struct inode *vi, nt
* NOTE: This function runs with the inode->i_lock spin lock held so it is not
* allowed to sleep. (Hence the GFP_ATOMIC allocation.)
*/
-static int ntfs_init_locked_inode(struct inode *vi, ntfs_attr *na)
+static int ntfs_init_locked_inode(struct inode *vi, void *data)
{
+ ntfs_attr *na = (ntfs_attr *)data;
ntfs_inode *ni = NTFS_I(vi);
vi->i_ino = na->mft_no;
@@ -131,7 +133,6 @@ static int ntfs_init_locked_inode(struct
return 0;
}
-typedef int (*set_t)(struct inode *, void *);
static int ntfs_read_locked_inode(struct inode *vi);
static int ntfs_read_locked_attr_inode(struct inode *base_vi, struct inode *vi);
static int ntfs_read_locked_index_inode(struct inode *base_vi,
@@ -164,8 +165,8 @@ struct inode *ntfs_iget(struct super_blo
na.name = NULL;
na.name_len = 0;
- vi = iget5_locked(sb, mft_no, (test_t)ntfs_test_inode,
- (set_t)ntfs_init_locked_inode, &na);
+ vi = iget5_locked(sb, mft_no, ntfs_test_inode,
+ ntfs_init_locked_inode, &na);
if (unlikely(!vi))
return ERR_PTR(-ENOMEM);
@@ -225,8 +226,8 @@ struct inode *ntfs_attr_iget(struct inod
na.name = name;
na.name_len = name_len;
- vi = iget5_locked(base_vi->i_sb, na.mft_no, (test_t)ntfs_test_inode,
- (set_t)ntfs_init_locked_inode, &na);
+ vi = iget5_locked(base_vi->i_sb, na.mft_no, ntfs_test_inode,
+ ntfs_init_locked_inode, &na);
if (unlikely(!vi))
return ERR_PTR(-ENOMEM);
@@ -280,8 +281,8 @@ struct inode *ntfs_index_iget(struct ino
na.name = name;
na.name_len = name_len;
- vi = iget5_locked(base_vi->i_sb, na.mft_no, (test_t)ntfs_test_inode,
- (set_t)ntfs_init_locked_inode, &na);
+ vi = iget5_locked(base_vi->i_sb, na.mft_no, ntfs_test_inode,
+ ntfs_init_locked_inode, &na);
if (unlikely(!vi))
return ERR_PTR(-ENOMEM);
--- a/fs/ntfs/inode.h
+++ b/fs/ntfs/inode.h
@@ -253,9 +253,7 @@ typedef struct {
ATTR_TYPE type;
} ntfs_attr;
-typedef int (*test_t)(struct inode *, void *);
-
-extern int ntfs_test_inode(struct inode *vi, ntfs_attr *na);
+extern int ntfs_test_inode(struct inode *vi, void *data);
extern struct inode *ntfs_iget(struct super_block *sb, unsigned long mft_no);
extern struct inode *ntfs_attr_iget(struct inode *base_vi, ATTR_TYPE type,
--- a/fs/ntfs/mft.c
+++ b/fs/ntfs/mft.c
@@ -958,7 +958,7 @@ bool ntfs_may_write_mft_record(ntfs_volu
* dirty code path of the inode dirty code path when writing
* $MFT occurs.
*/
- vi = ilookup5_nowait(sb, mft_no, (test_t)ntfs_test_inode, &na);
+ vi = ilookup5_nowait(sb, mft_no, ntfs_test_inode, &na);
}
if (vi) {
ntfs_debug("Base inode 0x%lx is in icache.", mft_no);
@@ -1019,7 +1019,7 @@ bool ntfs_may_write_mft_record(ntfs_volu
vi = igrab(mft_vi);
BUG_ON(vi != mft_vi);
} else
- vi = ilookup5_nowait(sb, na.mft_no, (test_t)ntfs_test_inode,
+ vi = ilookup5_nowait(sb, na.mft_no, ntfs_test_inode,
&na);
if (!vi) {
/*
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 03/88] HID: quirks: Add quirk for the Microsoft Surface 3 type-cover
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 01/88] serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30 Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 02/88] ntfs: fix ntfs_test_inode and ntfs_init_locked_inode function type Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 04/88] HID: google: add eel USB id Greg Kroah-Hartman
` (91 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Hans de Goede, Jiri Kosina
From: Hans de Goede <hdegoede@redhat.com>
commit 9003fbe0f3674b972f56fa7e6bf3ac9dbfc4d0ec upstream.
Add a HID_QUIRK_NO_INIT_REPORTS quirk for the
Microsoft Surface 3 (non pro) type-cover.
Trying to init the reports seems to confuse the type-cover and
causes 2 issues:
1. Despite hid-multitouch sending the command to switch the
touchpad to multitouch mode, it keeps sending events on the
mouse emulation interface.
2. The touchpad completely stops sending events after a reboot.
Adding the HID_QUIRK_NO_INIT_REPORTS quirk fixes both issues.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-quirks.c | 1 +
2 files changed, 2 insertions(+)
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -858,6 +858,7 @@
#define USB_DEVICE_ID_MS_TOUCH_COVER_2 0x07a7
#define USB_DEVICE_ID_MS_TYPE_COVER_2 0x07a9
#define USB_DEVICE_ID_MS_POWER_COVER 0x07da
+#define USB_DEVICE_ID_MS_SURFACE3_COVER 0x07de
#define USB_DEVICE_ID_MS_XBOX_ONE_S_CONTROLLER 0x02fd
#define USB_DEVICE_ID_MS_PIXART_MOUSE 0x00cb
#define USB_DEVICE_ID_8BITDO_SN30_PRO_PLUS 0x02e0
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -124,6 +124,7 @@ static const struct hid_device_id hid_qu
{ HID_USB_DEVICE(USB_VENDOR_ID_MCS, USB_DEVICE_ID_MCS_GAMEPADBLOCK), HID_QUIRK_MULTI_INPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PIXART_MOUSE), HID_QUIRK_ALWAYS_POLL },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER), HID_QUIRK_NO_INIT_REPORTS },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_SURFACE3_COVER), HID_QUIRK_NO_INIT_REPORTS },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_SURFACE_PRO_2), HID_QUIRK_NO_INIT_REPORTS },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TOUCH_COVER_2), HID_QUIRK_NO_INIT_REPORTS },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_2), HID_QUIRK_NO_INIT_REPORTS },
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 04/88] HID: google: add eel USB id
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (2 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 03/88] HID: quirks: Add quirk for the Microsoft Surface 3 type-cover Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 05/88] HID: add hid_is_usb() function to make it simpler for USB detection Greg Kroah-Hartman
` (90 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, xiazhengqiao, Benjamin Tissoires
From: xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com>
commit caff009098e6cf59fd6ac21c3a3befcc854978b4 upstream.
Add one additional hammer-like device.
Signed-off-by: xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211203030119.28612-1-xiazhengqiao@huaqin.corp-partner.google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hid/hid-google-hammer.c | 2 ++
drivers/hid/hid-ids.h | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/hid/hid-google-hammer.c
+++ b/drivers/hid/hid-google-hammer.c
@@ -470,6 +470,8 @@ static const struct hid_device_id hammer
{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_DON) },
{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
+ USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_EEL) },
+ { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_HAMMER) },
{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_MAGNEMITE) },
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -489,6 +489,7 @@
#define USB_DEVICE_ID_GOOGLE_MAGNEMITE 0x503d
#define USB_DEVICE_ID_GOOGLE_MOONBALL 0x5044
#define USB_DEVICE_ID_GOOGLE_DON 0x5050
+#define USB_DEVICE_ID_GOOGLE_EEL 0x5057
#define USB_VENDOR_ID_GOTOP 0x08f2
#define USB_DEVICE_ID_SUPER_Q2 0x007f
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 05/88] HID: add hid_is_usb() function to make it simpler for USB detection
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (3 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 04/88] HID: google: add eel USB id Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 06/88] HID: add USB_HID dependancy to hid-prodikeys Greg Kroah-Hartman
` (89 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jiri Kosina, Benjamin Tissoires, linux-input
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f83baa0cb6cfc92ebaf7f9d3a99d7e34f2e77a8a upstream.
A number of HID drivers already call hid_is_using_ll_driver() but only
for the detection of if this is a USB device or not. Make this more
obvious by creating hid_is_usb() and calling the function that way.
Also converts the existing hid_is_using_ll_driver() functions to use the
new call.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: stable@vger.kernel.org
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211201183503.2373082-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hid/hid-asus.c | 2 +-
drivers/hid/hid-logitech-dj.c | 2 +-
drivers/hid/hid-u2fzero.c | 2 +-
drivers/hid/hid-uclogic-params.c | 3 +--
drivers/hid/wacom_sys.c | 2 +-
include/linux/hid.h | 5 +++++
6 files changed, 10 insertions(+), 6 deletions(-)
--- a/drivers/hid/hid-asus.c
+++ b/drivers/hid/hid-asus.c
@@ -849,7 +849,7 @@ static int asus_probe(struct hid_device
if (drvdata->quirks & QUIRK_IS_MULTITOUCH)
drvdata->tp = &asus_i2c_tp;
- if (drvdata->quirks & QUIRK_T100_KEYBOARD) {
+ if ((drvdata->quirks & QUIRK_T100_KEYBOARD) && hid_is_usb(hdev)) {
struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
if (intf->altsetting->desc.bInterfaceNumber == T100_TPAD_INTF) {
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -1686,7 +1686,7 @@ static int logi_dj_probe(struct hid_devi
case recvr_type_27mhz: no_dj_interfaces = 2; break;
case recvr_type_bluetooth: no_dj_interfaces = 2; break;
}
- if (hid_is_using_ll_driver(hdev, &usb_hid_driver)) {
+ if (hid_is_usb(hdev)) {
intf = to_usb_interface(hdev->dev.parent);
if (intf && intf->altsetting->desc.bInterfaceNumber >=
no_dj_interfaces) {
--- a/drivers/hid/hid-u2fzero.c
+++ b/drivers/hid/hid-u2fzero.c
@@ -290,7 +290,7 @@ static int u2fzero_probe(struct hid_devi
unsigned int minor;
int ret;
- if (!hid_is_using_ll_driver(hdev, &usb_hid_driver))
+ if (!hid_is_usb(hdev))
return -EINVAL;
dev = devm_kzalloc(&hdev->dev, sizeof(*dev), GFP_KERNEL);
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -841,8 +841,7 @@ int uclogic_params_init(struct uclogic_p
struct uclogic_params p = {0, };
/* Check arguments */
- if (params == NULL || hdev == NULL ||
- !hid_is_using_ll_driver(hdev, &usb_hid_driver)) {
+ if (params == NULL || hdev == NULL || !hid_is_usb(hdev)) {
rc = -EINVAL;
goto cleanup;
}
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -2217,7 +2217,7 @@ static void wacom_update_name(struct wac
if ((features->type == HID_GENERIC) && !strcmp("Wacom HID", features->name)) {
char *product_name = wacom->hdev->name;
- if (hid_is_using_ll_driver(wacom->hdev, &usb_hid_driver)) {
+ if (hid_is_usb(wacom->hdev)) {
struct usb_interface *intf = to_usb_interface(wacom->hdev->dev.parent);
struct usb_device *dev = interface_to_usbdev(intf);
product_name = dev->product;
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -831,6 +831,11 @@ static inline bool hid_is_using_ll_drive
return hdev->ll_driver == driver;
}
+static inline bool hid_is_usb(struct hid_device *hdev)
+{
+ return hid_is_using_ll_driver(hdev, &usb_hid_driver);
+}
+
#define PM_HINT_FULLON 1<<5
#define PM_HINT_NORMAL 1<<1
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 06/88] HID: add USB_HID dependancy to hid-prodikeys
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (4 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 05/88] HID: add hid_is_usb() function to make it simpler for USB detection Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 07/88] HID: add USB_HID dependancy to hid-chicony Greg Kroah-Hartman
` (88 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Jiri Kosina,
Benjamin Tissoires
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 30cb3c2ad24b66fb7639a6d1f4390c74d6e68f94 upstream.
The prodikeys HID driver only controls USB devices, yet did not have a
dependancy on USB_HID. This causes build errors on some configurations
like nios2 when building due to new changes to the prodikeys driver.
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211203081231.2856936-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hid/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -244,7 +244,7 @@ config HID_MACALLY
config HID_PRODIKEYS
tristate "Prodikeys PC-MIDI Keyboard support"
- depends on HID && SND
+ depends on USB_HID && SND
select SND_RAWMIDI
---help---
Support for Prodikeys PC-MIDI Keyboard device support.
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 07/88] HID: add USB_HID dependancy to hid-chicony
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (5 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 06/88] HID: add USB_HID dependancy to hid-prodikeys Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 08/88] HID: add USB_HID dependancy on some USB HID drivers Greg Kroah-Hartman
` (87 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stephen Rothwell, Jiri Kosina,
Benjamin Tissoires
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d080811f27936f712f619f847389f403ac873b8f upstream.
The chicony HID driver only controls USB devices, yet did not have a
dependancy on USB_HID. This causes build errors on some configurations
like sparc when building due to new changes to the chicony driver.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: stable@vger.kernel.org
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211203075927.2829218-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hid/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -206,7 +206,7 @@ config HID_CHERRY
config HID_CHICONY
tristate "Chicony devices"
- depends on HID
+ depends on USB_HID
default !EXPERT
---help---
Support for Chicony Tactical pad and special keys on Chicony keyboards.
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 08/88] HID: add USB_HID dependancy on some USB HID drivers
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (6 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 07/88] HID: add USB_HID dependancy to hid-chicony Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 09/88] HID: bigbenff: prevent null pointer dereference Greg Kroah-Hartman
` (86 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Benjamin Tissoires
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f237d9028f844a86955fc9da59d7ac4a5c55d7d5 upstream.
Some HID drivers are only for USB drivers, yet did not depend on
CONFIG_USB_HID. This was hidden by the fact that the USB functions were
stubbed out in the past, but now that drivers are checking for USB
devices properly, build errors can occur with some random
configurations.
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211202114819.2511954-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hid/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -213,7 +213,7 @@ config HID_CHICONY
config HID_CORSAIR
tristate "Corsair devices"
- depends on HID && USB && LEDS_CLASS
+ depends on USB_HID && LEDS_CLASS
---help---
Support for Corsair devices that are not fully compliant with the
HID standard.
@@ -524,7 +524,7 @@ config HID_LENOVO
config HID_LOGITECH
tristate "Logitech devices"
- depends on HID
+ depends on USB_HID
default !EXPERT
---help---
Support for Logitech devices that are not fully compliant with HID standard.
@@ -871,7 +871,7 @@ config HID_SAITEK
config HID_SAMSUNG
tristate "Samsung InfraRed remote control or keyboards"
- depends on HID
+ depends on USB_HID
---help---
Support for Samsung InfraRed remote control or keyboards.
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 09/88] HID: bigbenff: prevent null pointer dereference
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (7 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 08/88] HID: add USB_HID dependancy on some USB HID drivers Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 10/88] HID: wacom: fix problems when device is not a valid USB device Greg Kroah-Hartman
` (85 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Benjamin Tissoires
From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
commit 918aa1ef104d286d16b9e7ef139a463ac7a296f0 upstream.
When emulating the device through uhid, there is a chance we don't have
output reports and so report_field is null.
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211202095334.14399-3-benjamin.tissoires@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hid/hid-bigbenff.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/hid/hid-bigbenff.c
+++ b/drivers/hid/hid-bigbenff.c
@@ -191,7 +191,7 @@ static void bigben_worker(struct work_st
struct bigben_device, worker);
struct hid_field *report_field = bigben->report->field[0];
- if (bigben->removed)
+ if (bigben->removed || !report_field)
return;
if (bigben->work_led) {
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 10/88] HID: wacom: fix problems when device is not a valid USB device
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (8 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 09/88] HID: bigbenff: prevent null pointer dereference Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 11/88] HID: check for valid USB device for many HID drivers Greg Kroah-Hartman
` (84 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jiri Kosina, Benjamin Tissoires, linux-input
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 720ac467204a70308bd687927ed475afb904e11b upstream.
The wacom driver accepts devices of more than just USB types, but some
code paths can cause problems if the device being controlled is not a
USB device due to a lack of checking. Add the needed checks to ensure
that the USB device accesses are only happening on a "real" USB device,
and not one on some other bus.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: stable@vger.kernel.org
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211201183503.2373082-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hid/wacom_sys.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -726,7 +726,7 @@ static void wacom_retrieve_hid_descripto
* Skip the query for this type and modify defaults based on
* interface number.
*/
- if (features->type == WIRELESS) {
+ if (features->type == WIRELESS && intf) {
if (intf->cur_altsetting->desc.bInterfaceNumber == 0)
features->device_type = WACOM_DEVICETYPE_WL_MONITOR;
else
@@ -2448,6 +2448,9 @@ static void wacom_wireless_work(struct w
wacom_destroy_battery(wacom);
+ if (!usbdev)
+ return;
+
/* Stylus interface */
hdev1 = usb_get_intfdata(usbdev->config->interface[1]);
wacom1 = hid_get_drvdata(hdev1);
@@ -2727,8 +2730,6 @@ static void wacom_mode_change_work(struc
static int wacom_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
- struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
- struct usb_device *dev = interface_to_usbdev(intf);
struct wacom *wacom;
struct wacom_wac *wacom_wac;
struct wacom_features *features;
@@ -2763,8 +2764,14 @@ static int wacom_probe(struct hid_device
wacom_wac->hid_data.inputmode = -1;
wacom_wac->mode_report = -1;
- wacom->usbdev = dev;
- wacom->intf = intf;
+ if (hid_is_usb(hdev)) {
+ struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+ struct usb_device *dev = interface_to_usbdev(intf);
+
+ wacom->usbdev = dev;
+ wacom->intf = intf;
+ }
+
mutex_init(&wacom->lock);
INIT_DELAYED_WORK(&wacom->init_work, wacom_init_work);
INIT_WORK(&wacom->wireless_work, wacom_wireless_work);
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 11/88] HID: check for valid USB device for many HID drivers
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (9 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 10/88] HID: wacom: fix problems when device is not a valid USB device Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 12/88] can: kvaser_usb: get CAN clock frequency from device Greg Kroah-Hartman
` (83 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jiri Kosina, Benjamin Tissoires,
Michael Zaidman, Stefan Achatz, Maxime Coquelin,
Alexandre Torgue, linux-input
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 93020953d0fa7035fd036ad87a47ae2b7aa4ae33 upstream.
Many HID drivers assume that the HID device assigned to them is a USB
device as that was the only way HID devices used to be able to be
created in Linux. However, with the additional ways that HID devices
can be created for many different bus types, that is no longer true, so
properly check that we have a USB device associated with the HID device
before allowing a driver that makes this assumption to claim it.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Michael Zaidman <michael.zaidman@gmail.com>
Cc: Stefan Achatz <erazor_de@users.sourceforge.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-input@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
[bentiss: amended for thrustmater.c hunk to apply]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211201183503.2373082-3-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hid/hid-chicony.c | 8 ++++++--
drivers/hid/hid-corsair.c | 7 ++++++-
drivers/hid/hid-elan.c | 2 +-
drivers/hid/hid-elo.c | 3 +++
drivers/hid/hid-holtek-kbd.c | 9 +++++++--
drivers/hid/hid-holtek-mouse.c | 9 +++++++++
drivers/hid/hid-lg.c | 10 ++++++++--
drivers/hid/hid-prodikeys.c | 10 ++++++++--
drivers/hid/hid-roccat-arvo.c | 3 +++
drivers/hid/hid-roccat-isku.c | 3 +++
drivers/hid/hid-roccat-kone.c | 3 +++
drivers/hid/hid-roccat-koneplus.c | 3 +++
drivers/hid/hid-roccat-konepure.c | 3 +++
drivers/hid/hid-roccat-kovaplus.c | 3 +++
drivers/hid/hid-roccat-lua.c | 3 +++
drivers/hid/hid-roccat-pyra.c | 3 +++
drivers/hid/hid-roccat-ryos.c | 3 +++
drivers/hid/hid-roccat-savu.c | 3 +++
drivers/hid/hid-samsung.c | 3 +++
drivers/hid/hid-uclogic-core.c | 3 +++
20 files changed, 84 insertions(+), 10 deletions(-)
--- a/drivers/hid/hid-chicony.c
+++ b/drivers/hid/hid-chicony.c
@@ -58,8 +58,12 @@ static int ch_input_mapping(struct hid_d
static __u8 *ch_switch12_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
- struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
-
+ struct usb_interface *intf;
+
+ if (!hid_is_usb(hdev))
+ return rdesc;
+
+ intf = to_usb_interface(hdev->dev.parent);
if (intf->cur_altsetting->desc.bInterfaceNumber == 1) {
/* Change usage maximum and logical maximum from 0x7fff to
* 0x2fff, so they don't exceed HID_MAX_USAGES */
--- a/drivers/hid/hid-corsair.c
+++ b/drivers/hid/hid-corsair.c
@@ -553,7 +553,12 @@ static int corsair_probe(struct hid_devi
int ret;
unsigned long quirks = id->driver_data;
struct corsair_drvdata *drvdata;
- struct usb_interface *usbif = to_usb_interface(dev->dev.parent);
+ struct usb_interface *usbif;
+
+ if (!hid_is_usb(dev))
+ return -EINVAL;
+
+ usbif = to_usb_interface(dev->dev.parent);
drvdata = devm_kzalloc(&dev->dev, sizeof(struct corsair_drvdata),
GFP_KERNEL);
--- a/drivers/hid/hid-elan.c
+++ b/drivers/hid/hid-elan.c
@@ -50,7 +50,7 @@ struct elan_drvdata {
static int is_not_elan_touchpad(struct hid_device *hdev)
{
- if (hdev->bus == BUS_USB) {
+ if (hid_is_usb(hdev)) {
struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
return (intf->altsetting->desc.bInterfaceNumber !=
--- a/drivers/hid/hid-elo.c
+++ b/drivers/hid/hid-elo.c
@@ -229,6 +229,9 @@ static int elo_probe(struct hid_device *
struct elo_priv *priv;
int ret;
+ if (!hid_is_usb(hdev))
+ return -EINVAL;
+
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
--- a/drivers/hid/hid-holtek-kbd.c
+++ b/drivers/hid/hid-holtek-kbd.c
@@ -140,12 +140,17 @@ static int holtek_kbd_input_event(struct
static int holtek_kbd_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
- struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
- int ret = hid_parse(hdev);
+ struct usb_interface *intf;
+ int ret;
+ if (!hid_is_usb(hdev))
+ return -EINVAL;
+
+ ret = hid_parse(hdev);
if (!ret)
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ intf = to_usb_interface(hdev->dev.parent);
if (!ret && intf->cur_altsetting->desc.bInterfaceNumber == 1) {
struct hid_input *hidinput;
list_for_each_entry(hidinput, &hdev->inputs, list) {
--- a/drivers/hid/hid-holtek-mouse.c
+++ b/drivers/hid/hid-holtek-mouse.c
@@ -62,6 +62,14 @@ static __u8 *holtek_mouse_report_fixup(s
return rdesc;
}
+static int holtek_mouse_probe(struct hid_device *hdev,
+ const struct hid_device_id *id)
+{
+ if (!hid_is_usb(hdev))
+ return -EINVAL;
+ return 0;
+}
+
static const struct hid_device_id holtek_mouse_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT,
USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067) },
@@ -83,6 +91,7 @@ static struct hid_driver holtek_mouse_dr
.name = "holtek_mouse",
.id_table = holtek_mouse_devices,
.report_fixup = holtek_mouse_report_fixup,
+ .probe = holtek_mouse_probe,
};
module_hid_driver(holtek_mouse_driver);
--- a/drivers/hid/hid-lg.c
+++ b/drivers/hid/hid-lg.c
@@ -769,12 +769,18 @@ static int lg_raw_event(struct hid_devic
static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
- struct usb_interface *iface = to_usb_interface(hdev->dev.parent);
- __u8 iface_num = iface->cur_altsetting->desc.bInterfaceNumber;
+ struct usb_interface *iface;
+ __u8 iface_num;
unsigned int connect_mask = HID_CONNECT_DEFAULT;
struct lg_drv_data *drv_data;
int ret;
+ if (!hid_is_usb(hdev))
+ return -EINVAL;
+
+ iface = to_usb_interface(hdev->dev.parent);
+ iface_num = iface->cur_altsetting->desc.bInterfaceNumber;
+
/* G29 only work with the 1st interface */
if ((hdev->product == USB_DEVICE_ID_LOGITECH_G29_WHEEL) &&
(iface_num != 0)) {
--- a/drivers/hid/hid-prodikeys.c
+++ b/drivers/hid/hid-prodikeys.c
@@ -798,12 +798,18 @@ static int pk_raw_event(struct hid_devic
static int pk_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret;
- struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
- unsigned short ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+ struct usb_interface *intf;
+ unsigned short ifnum;
unsigned long quirks = id->driver_data;
struct pk_device *pk;
struct pcmidi_snd *pm = NULL;
+ if (!hid_is_usb(hdev))
+ return -EINVAL;
+
+ intf = to_usb_interface(hdev->dev.parent);
+ ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+
pk = kzalloc(sizeof(*pk), GFP_KERNEL);
if (pk == NULL) {
hid_err(hdev, "can't alloc descriptor\n");
--- a/drivers/hid/hid-roccat-arvo.c
+++ b/drivers/hid/hid-roccat-arvo.c
@@ -344,6 +344,9 @@ static int arvo_probe(struct hid_device
{
int retval;
+ if (!hid_is_usb(hdev))
+ return -EINVAL;
+
retval = hid_parse(hdev);
if (retval) {
hid_err(hdev, "parse failed\n");
--- a/drivers/hid/hid-roccat-isku.c
+++ b/drivers/hid/hid-roccat-isku.c
@@ -324,6 +324,9 @@ static int isku_probe(struct hid_device
{
int retval;
+ if (!hid_is_usb(hdev))
+ return -EINVAL;
+
retval = hid_parse(hdev);
if (retval) {
hid_err(hdev, "parse failed\n");
--- a/drivers/hid/hid-roccat-kone.c
+++ b/drivers/hid/hid-roccat-kone.c
@@ -749,6 +749,9 @@ static int kone_probe(struct hid_device
{
int retval;
+ if (!hid_is_usb(hdev))
+ return -EINVAL;
+
retval = hid_parse(hdev);
if (retval) {
hid_err(hdev, "parse failed\n");
--- a/drivers/hid/hid-roccat-koneplus.c
+++ b/drivers/hid/hid-roccat-koneplus.c
@@ -431,6 +431,9 @@ static int koneplus_probe(struct hid_dev
{
int retval;
+ if (!hid_is_usb(hdev))
+ return -EINVAL;
+
retval = hid_parse(hdev);
if (retval) {
hid_err(hdev, "parse failed\n");
--- a/drivers/hid/hid-roccat-konepure.c
+++ b/drivers/hid/hid-roccat-konepure.c
@@ -133,6 +133,9 @@ static int konepure_probe(struct hid_dev
{
int retval;
+ if (!hid_is_usb(hdev))
+ return -EINVAL;
+
retval = hid_parse(hdev);
if (retval) {
hid_err(hdev, "parse failed\n");
--- a/drivers/hid/hid-roccat-kovaplus.c
+++ b/drivers/hid/hid-roccat-kovaplus.c
@@ -501,6 +501,9 @@ static int kovaplus_probe(struct hid_dev
{
int retval;
+ if (!hid_is_usb(hdev))
+ return -EINVAL;
+
retval = hid_parse(hdev);
if (retval) {
hid_err(hdev, "parse failed\n");
--- a/drivers/hid/hid-roccat-lua.c
+++ b/drivers/hid/hid-roccat-lua.c
@@ -160,6 +160,9 @@ static int lua_probe(struct hid_device *
{
int retval;
+ if (!hid_is_usb(hdev))
+ return -EINVAL;
+
retval = hid_parse(hdev);
if (retval) {
hid_err(hdev, "parse failed\n");
--- a/drivers/hid/hid-roccat-pyra.c
+++ b/drivers/hid/hid-roccat-pyra.c
@@ -449,6 +449,9 @@ static int pyra_probe(struct hid_device
{
int retval;
+ if (!hid_is_usb(hdev))
+ return -EINVAL;
+
retval = hid_parse(hdev);
if (retval) {
hid_err(hdev, "parse failed\n");
--- a/drivers/hid/hid-roccat-ryos.c
+++ b/drivers/hid/hid-roccat-ryos.c
@@ -141,6 +141,9 @@ static int ryos_probe(struct hid_device
{
int retval;
+ if (!hid_is_usb(hdev))
+ return -EINVAL;
+
retval = hid_parse(hdev);
if (retval) {
hid_err(hdev, "parse failed\n");
--- a/drivers/hid/hid-roccat-savu.c
+++ b/drivers/hid/hid-roccat-savu.c
@@ -113,6 +113,9 @@ static int savu_probe(struct hid_device
{
int retval;
+ if (!hid_is_usb(hdev))
+ return -EINVAL;
+
retval = hid_parse(hdev);
if (retval) {
hid_err(hdev, "parse failed\n");
--- a/drivers/hid/hid-samsung.c
+++ b/drivers/hid/hid-samsung.c
@@ -152,6 +152,9 @@ static int samsung_probe(struct hid_devi
int ret;
unsigned int cmask = HID_CONNECT_DEFAULT;
+ if (!hid_is_usb(hdev))
+ return -EINVAL;
+
ret = hid_parse(hdev);
if (ret) {
hid_err(hdev, "parse failed\n");
--- a/drivers/hid/hid-uclogic-core.c
+++ b/drivers/hid/hid-uclogic-core.c
@@ -164,6 +164,9 @@ static int uclogic_probe(struct hid_devi
struct uclogic_drvdata *drvdata = NULL;
bool params_initialized = false;
+ if (!hid_is_usb(hdev))
+ return -EINVAL;
+
/*
* libinput requires the pad interface to be on a different node
* than the pen, so use QUIRK_MULTI_INPUT for all tablets.
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 12/88] can: kvaser_usb: get CAN clock frequency from device
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (10 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 11/88] HID: check for valid USB device for many HID drivers Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 13/88] can: kvaser_pciefd: kvaser_pciefd_rx_error_frame(): increase correct stats->{rx,tx}_errors counter Greg Kroah-Hartman
` (82 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jimmy Assarsson, Marc Kleine-Budde
From: Jimmy Assarsson <extja@kvaser.com>
commit fb12797ab1fef480ad8a32a30984844444eeb00d upstream.
The CAN clock frequency is used when calculating the CAN bittiming
parameters. When wrong clock frequency is used, the device may end up
with wrong bittiming parameters, depending on user requested bittiming
parameters.
To avoid this, get the CAN clock frequency from the device. Various
existing Kvaser Leaf products use different CAN clocks.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Link: https://lore.kernel.org/all/20211208152122.250852-2-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 101 ++++++++++++++++-------
1 file changed, 73 insertions(+), 28 deletions(-)
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -28,10 +28,6 @@
#include "kvaser_usb.h"
-/* Forward declaration */
-static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg;
-
-#define CAN_USB_CLOCK 8000000
#define MAX_USBCAN_NET_DEVICES 2
/* Command header size */
@@ -80,6 +76,12 @@ static const struct kvaser_usb_dev_cfg k
#define CMD_LEAF_LOG_MESSAGE 106
+/* Leaf frequency options */
+#define KVASER_USB_LEAF_SWOPTION_FREQ_MASK 0x60
+#define KVASER_USB_LEAF_SWOPTION_FREQ_16_MHZ_CLK 0
+#define KVASER_USB_LEAF_SWOPTION_FREQ_32_MHZ_CLK BIT(5)
+#define KVASER_USB_LEAF_SWOPTION_FREQ_24_MHZ_CLK BIT(6)
+
/* error factors */
#define M16C_EF_ACKE BIT(0)
#define M16C_EF_CRCE BIT(1)
@@ -340,6 +342,50 @@ struct kvaser_usb_err_summary {
};
};
+static const struct can_bittiming_const kvaser_usb_leaf_bittiming_const = {
+ .name = "kvaser_usb",
+ .tseg1_min = KVASER_USB_TSEG1_MIN,
+ .tseg1_max = KVASER_USB_TSEG1_MAX,
+ .tseg2_min = KVASER_USB_TSEG2_MIN,
+ .tseg2_max = KVASER_USB_TSEG2_MAX,
+ .sjw_max = KVASER_USB_SJW_MAX,
+ .brp_min = KVASER_USB_BRP_MIN,
+ .brp_max = KVASER_USB_BRP_MAX,
+ .brp_inc = KVASER_USB_BRP_INC,
+};
+
+static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg_8mhz = {
+ .clock = {
+ .freq = 8000000,
+ },
+ .timestamp_freq = 1,
+ .bittiming_const = &kvaser_usb_leaf_bittiming_const,
+};
+
+static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg_16mhz = {
+ .clock = {
+ .freq = 16000000,
+ },
+ .timestamp_freq = 1,
+ .bittiming_const = &kvaser_usb_leaf_bittiming_const,
+};
+
+static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg_24mhz = {
+ .clock = {
+ .freq = 24000000,
+ },
+ .timestamp_freq = 1,
+ .bittiming_const = &kvaser_usb_leaf_bittiming_const,
+};
+
+static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg_32mhz = {
+ .clock = {
+ .freq = 32000000,
+ },
+ .timestamp_freq = 1,
+ .bittiming_const = &kvaser_usb_leaf_bittiming_const,
+};
+
static void *
kvaser_usb_leaf_frame_to_cmd(const struct kvaser_usb_net_priv *priv,
const struct sk_buff *skb, int *frame_len,
@@ -471,6 +517,27 @@ static int kvaser_usb_leaf_send_simple_c
return rc;
}
+static void kvaser_usb_leaf_get_software_info_leaf(struct kvaser_usb *dev,
+ const struct leaf_cmd_softinfo *softinfo)
+{
+ u32 sw_options = le32_to_cpu(softinfo->sw_options);
+
+ dev->fw_version = le32_to_cpu(softinfo->fw_version);
+ dev->max_tx_urbs = le16_to_cpu(softinfo->max_outstanding_tx);
+
+ switch (sw_options & KVASER_USB_LEAF_SWOPTION_FREQ_MASK) {
+ case KVASER_USB_LEAF_SWOPTION_FREQ_16_MHZ_CLK:
+ dev->cfg = &kvaser_usb_leaf_dev_cfg_16mhz;
+ break;
+ case KVASER_USB_LEAF_SWOPTION_FREQ_24_MHZ_CLK:
+ dev->cfg = &kvaser_usb_leaf_dev_cfg_24mhz;
+ break;
+ case KVASER_USB_LEAF_SWOPTION_FREQ_32_MHZ_CLK:
+ dev->cfg = &kvaser_usb_leaf_dev_cfg_32mhz;
+ break;
+ }
+}
+
static int kvaser_usb_leaf_get_software_info_inner(struct kvaser_usb *dev)
{
struct kvaser_cmd cmd;
@@ -486,14 +553,13 @@ static int kvaser_usb_leaf_get_software_
switch (dev->card_data.leaf.family) {
case KVASER_LEAF:
- dev->fw_version = le32_to_cpu(cmd.u.leaf.softinfo.fw_version);
- dev->max_tx_urbs =
- le16_to_cpu(cmd.u.leaf.softinfo.max_outstanding_tx);
+ kvaser_usb_leaf_get_software_info_leaf(dev, &cmd.u.leaf.softinfo);
break;
case KVASER_USBCAN:
dev->fw_version = le32_to_cpu(cmd.u.usbcan.softinfo.fw_version);
dev->max_tx_urbs =
le16_to_cpu(cmd.u.usbcan.softinfo.max_outstanding_tx);
+ dev->cfg = &kvaser_usb_leaf_dev_cfg_8mhz;
break;
}
@@ -1225,24 +1291,11 @@ static int kvaser_usb_leaf_init_card(str
{
struct kvaser_usb_dev_card_data *card_data = &dev->card_data;
- dev->cfg = &kvaser_usb_leaf_dev_cfg;
card_data->ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
return 0;
}
-static const struct can_bittiming_const kvaser_usb_leaf_bittiming_const = {
- .name = "kvaser_usb",
- .tseg1_min = KVASER_USB_TSEG1_MIN,
- .tseg1_max = KVASER_USB_TSEG1_MAX,
- .tseg2_min = KVASER_USB_TSEG2_MIN,
- .tseg2_max = KVASER_USB_TSEG2_MAX,
- .sjw_max = KVASER_USB_SJW_MAX,
- .brp_min = KVASER_USB_BRP_MIN,
- .brp_max = KVASER_USB_BRP_MAX,
- .brp_inc = KVASER_USB_BRP_INC,
-};
-
static int kvaser_usb_leaf_set_bittiming(struct net_device *netdev)
{
struct kvaser_usb_net_priv *priv = netdev_priv(netdev);
@@ -1348,11 +1401,3 @@ const struct kvaser_usb_dev_ops kvaser_u
.dev_read_bulk_callback = kvaser_usb_leaf_read_bulk_callback,
.dev_frame_to_cmd = kvaser_usb_leaf_frame_to_cmd,
};
-
-static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_dev_cfg = {
- .clock = {
- .freq = CAN_USB_CLOCK,
- },
- .timestamp_freq = 1,
- .bittiming_const = &kvaser_usb_leaf_bittiming_const,
-};
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 13/88] can: kvaser_pciefd: kvaser_pciefd_rx_error_frame(): increase correct stats->{rx,tx}_errors counter
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (11 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 12/88] can: kvaser_usb: get CAN clock frequency from device Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 14/88] can: sja1000: fix use after free in ems_pcmcia_add_card() Greg Kroah-Hartman
` (81 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jimmy Assarsson, Marc Kleine-Budde
From: Jimmy Assarsson <extja@kvaser.com>
commit 36aea60fc892ce73f96d45dc7eb239c7c4c1fa69 upstream.
Check the direction bit in the error frame packet (EPACK) to determine
which net_device_stats {rx,tx}_errors counter to increase.
Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Link: https://lore.kernel.org/all/20211208152122.250852-1-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/can/kvaser_pciefd.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/net/can/kvaser_pciefd.c
+++ b/drivers/net/can/kvaser_pciefd.c
@@ -248,6 +248,9 @@ MODULE_DESCRIPTION("CAN driver for Kvase
#define KVASER_PCIEFD_SPACK_EWLR BIT(23)
#define KVASER_PCIEFD_SPACK_EPLR BIT(24)
+/* Kvaser KCAN_EPACK second word */
+#define KVASER_PCIEFD_EPACK_DIR_TX BIT(0)
+
struct kvaser_pciefd;
struct kvaser_pciefd_can {
@@ -1283,7 +1286,10 @@ static int kvaser_pciefd_rx_error_frame(
can->err_rep_cnt++;
can->can.can_stats.bus_error++;
- stats->rx_errors++;
+ if (p->header[1] & KVASER_PCIEFD_EPACK_DIR_TX)
+ stats->tx_errors++;
+ else
+ stats->rx_errors++;
can->bec.txerr = bec.txerr;
can->bec.rxerr = bec.rxerr;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 14/88] can: sja1000: fix use after free in ems_pcmcia_add_card()
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (12 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 13/88] can: kvaser_pciefd: kvaser_pciefd_rx_error_frame(): increase correct stats->{rx,tx}_errors counter Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 15/88] nfc: fix potential NULL pointer deref in nfc_genl_dump_ses_done Greg Kroah-Hartman
` (80 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Oliver Hartkopp,
Marc Kleine-Budde
From: Dan Carpenter <dan.carpenter@oracle.com>
commit 3ec6ca6b1a8e64389f0212b5a1b0f6fed1909e45 upstream.
If the last channel is not available then "dev" is freed. Fortunately,
we can just use "pdev->irq" instead.
Also we should check if at least one channel was set up.
Fixes: fd734c6f25ae ("can/sja1000: add driver for EMS PCMCIA card")
Link: https://lore.kernel.org/all/20211124145041.GB13656@kili
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/can/sja1000/ems_pcmcia.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/net/can/sja1000/ems_pcmcia.c
+++ b/drivers/net/can/sja1000/ems_pcmcia.c
@@ -235,7 +235,12 @@ static int ems_pcmcia_add_card(struct pc
free_sja1000dev(dev);
}
- err = request_irq(dev->irq, &ems_pcmcia_interrupt, IRQF_SHARED,
+ if (!card->channels) {
+ err = -ENODEV;
+ goto failure_cleanup;
+ }
+
+ err = request_irq(pdev->irq, &ems_pcmcia_interrupt, IRQF_SHARED,
DRV_NAME, card);
if (!err)
return 0;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 15/88] nfc: fix potential NULL pointer deref in nfc_genl_dump_ses_done
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (13 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 14/88] can: sja1000: fix use after free in ems_pcmcia_add_card() Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 16/88] selftests: netfilter: add a vrf+conntrack testcase Greg Kroah-Hartman
` (79 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Jakub Kicinski
From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
commit 4cd8371a234d051f9c9557fcbb1f8c523b1c0d10 upstream.
The done() netlink callback nfc_genl_dump_ses_done() should check if
received argument is non-NULL, because its allocation could fail earlier
in dumpit() (nfc_genl_dump_ses()).
Fixes: ac22ac466a65 ("NFC: Add a GET_SE netlink API")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211209081307.57337-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/nfc/netlink.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/net/nfc/netlink.c
+++ b/net/nfc/netlink.c
@@ -1400,8 +1400,10 @@ static int nfc_genl_dump_ses_done(struct
{
struct class_dev_iter *iter = (struct class_dev_iter *) cb->args[0];
- nfc_device_iter_exit(iter);
- kfree(iter);
+ if (iter) {
+ nfc_device_iter_exit(iter);
+ kfree(iter);
+ }
return 0;
}
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 16/88] selftests: netfilter: add a vrf+conntrack testcase
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (14 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 15/88] nfc: fix potential NULL pointer deref in nfc_genl_dump_ses_done Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 17/88] vrf: dont run conntrack on vrf with !dflt qdisc Greg Kroah-Hartman
` (78 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eugene Crosser, Lahav Schlesinger,
Florian Westphal, Pablo Neira Ayuso
From: Florian Westphal <fw@strlen.de>
commit 33b8aad21ac175eba9577a73eb62b0aa141c241c upstream.
Rework the reproducer for the vrf+conntrack regression reported
by Eugene into a selftest and also add a test for ip masquerading
that Lahav fixed recently.
With net or net-next tree, the first test fails and the latter
two pass.
With 09e856d54bda5f28 ("vrf: Reset skb conntrack connection on VRF rcv")
reverted first test passes but the last two fail.
A proper fix needs more work, for time being a revert seems to be
the best choice, snat/masquerade did not work before the fix.
Link: https://lore.kernel.org/netdev/378ca299-4474-7e9a-3d36-2350c8c98995@gmail.com/T/#m95358a31810df7392f541f99d187227bc75c9963
Reported-by: Eugene Crosser <crosser@average.org>
Cc: Lahav Schlesinger <lschlesinger@drivenets.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/netfilter/conntrack_vrf.sh | 219 +++++++++++++++++++++
1 file changed, 219 insertions(+)
create mode 100755 tools/testing/selftests/netfilter/conntrack_vrf.sh
--- /dev/null
+++ b/tools/testing/selftests/netfilter/conntrack_vrf.sh
@@ -0,0 +1,219 @@
+#!/bin/sh
+
+# This script demonstrates interaction of conntrack and vrf.
+# The vrf driver calls the netfilter hooks again, with oif/iif
+# pointing at the VRF device.
+#
+# For ingress, this means first iteration has iifname of lower/real
+# device. In this script, thats veth0.
+# Second iteration is iifname set to vrf device, tvrf in this script.
+#
+# For egress, this is reversed: first iteration has the vrf device,
+# second iteration is done with the lower/real/veth0 device.
+#
+# test_ct_zone_in demonstrates unexpected change of nftables
+# behavior # caused by commit 09e856d54bda5f28 "vrf: Reset skb conntrack
+# connection on VRF rcv"
+#
+# It was possible to assign conntrack zone to a packet (or mark it for
+# `notracking`) in the prerouting chain before conntrack, based on real iif.
+#
+# After the change, the zone assignment is lost and the zone is assigned based
+# on the VRF master interface (in case such a rule exists).
+# assignment is lost. Instead, assignment based on the `iif` matching
+# Thus it is impossible to distinguish packets based on the original
+# interface.
+#
+# test_masquerade_vrf and test_masquerade_veth0 demonstrate the problem
+# that was supposed to be fixed by the commit mentioned above to make sure
+# that any fix to test case 1 won't break masquerade again.
+
+ksft_skip=4
+
+IP0=172.30.30.1
+IP1=172.30.30.2
+PFXL=30
+ret=0
+
+sfx=$(mktemp -u "XXXXXXXX")
+ns0="ns0-$sfx"
+ns1="ns1-$sfx"
+
+cleanup()
+{
+ ip netns pids $ns0 | xargs kill 2>/dev/null
+ ip netns pids $ns1 | xargs kill 2>/dev/null
+
+ ip netns del $ns0 $ns1
+}
+
+nft --version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not run test without nft tool"
+ exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not run test without ip tool"
+ exit $ksft_skip
+fi
+
+ip netns add "$ns0"
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not create net namespace $ns0"
+ exit $ksft_skip
+fi
+ip netns add "$ns1"
+
+trap cleanup EXIT
+
+ip netns exec $ns0 sysctl -q -w net.ipv4.conf.default.rp_filter=0
+ip netns exec $ns0 sysctl -q -w net.ipv4.conf.all.rp_filter=0
+ip netns exec $ns0 sysctl -q -w net.ipv4.conf.all.rp_filter=0
+
+ip link add veth0 netns "$ns0" type veth peer name veth0 netns "$ns1" > /dev/null 2>&1
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not add veth device"
+ exit $ksft_skip
+fi
+
+ip -net $ns0 li add tvrf type vrf table 9876
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not add vrf device"
+ exit $ksft_skip
+fi
+
+ip -net $ns0 li set lo up
+
+ip -net $ns0 li set veth0 master tvrf
+ip -net $ns0 li set tvrf up
+ip -net $ns0 li set veth0 up
+ip -net $ns1 li set veth0 up
+
+ip -net $ns0 addr add $IP0/$PFXL dev veth0
+ip -net $ns1 addr add $IP1/$PFXL dev veth0
+
+ip netns exec $ns1 iperf3 -s > /dev/null 2>&1&
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not start iperf3"
+ exit $ksft_skip
+fi
+
+# test vrf ingress handling.
+# The incoming connection should be placed in conntrack zone 1,
+# as decided by the first iteration of the ruleset.
+test_ct_zone_in()
+{
+ip netns exec $ns0 nft -f - <<EOF
+table testct {
+ chain rawpre {
+ type filter hook prerouting priority raw;
+
+ iif { veth0, tvrf } counter meta nftrace set 1
+ iif veth0 counter ct zone set 1 counter return
+ iif tvrf counter ct zone set 2 counter return
+ ip protocol icmp counter
+ notrack counter
+ }
+
+ chain rawout {
+ type filter hook output priority raw;
+
+ oif veth0 counter ct zone set 1 counter return
+ oif tvrf counter ct zone set 2 counter return
+ notrack counter
+ }
+}
+EOF
+ ip netns exec $ns1 ping -W 1 -c 1 -I veth0 $IP0 > /dev/null
+
+ # should be in zone 1, not zone 2
+ count=$(ip netns exec $ns0 conntrack -L -s $IP1 -d $IP0 -p icmp --zone 1 2>/dev/null | wc -l)
+ if [ $count -eq 1 ]; then
+ echo "PASS: entry found in conntrack zone 1"
+ else
+ echo "FAIL: entry not found in conntrack zone 1"
+ count=$(ip netns exec $ns0 conntrack -L -s $IP1 -d $IP0 -p icmp --zone 2 2> /dev/null | wc -l)
+ if [ $count -eq 1 ]; then
+ echo "FAIL: entry found in zone 2 instead"
+ else
+ echo "FAIL: entry not in zone 1 or 2, dumping table"
+ ip netns exec $ns0 conntrack -L
+ ip netns exec $ns0 nft list ruleset
+ fi
+ fi
+}
+
+# add masq rule that gets evaluated w. outif set to vrf device.
+# This tests the first iteration of the packet through conntrack,
+# oifname is the vrf device.
+test_masquerade_vrf()
+{
+ ip netns exec $ns0 conntrack -F 2>/dev/null
+
+ip netns exec $ns0 nft -f - <<EOF
+flush ruleset
+table ip nat {
+ chain postrouting {
+ type nat hook postrouting priority 0;
+ # NB: masquerade should always be combined with 'oif(name) bla',
+ # lack of this is intentional here, we want to exercise double-snat.
+ ip saddr 172.30.30.0/30 counter masquerade random
+ }
+}
+EOF
+ ip netns exec $ns0 ip vrf exec tvrf iperf3 -t 1 -c $IP1 >/dev/null
+ if [ $? -ne 0 ]; then
+ echo "FAIL: iperf3 connect failure with masquerade + sport rewrite on vrf device"
+ ret=1
+ return
+ fi
+
+ # must also check that nat table was evaluated on second (lower device) iteration.
+ ip netns exec $ns0 nft list table ip nat |grep -q 'counter packets 2'
+ if [ $? -eq 0 ]; then
+ echo "PASS: iperf3 connect with masquerade + sport rewrite on vrf device"
+ else
+ echo "FAIL: vrf masq rule has unexpected counter value"
+ ret=1
+ fi
+}
+
+# add masq rule that gets evaluated w. outif set to veth device.
+# This tests the 2nd iteration of the packet through conntrack,
+# oifname is the lower device (veth0 in this case).
+test_masquerade_veth()
+{
+ ip netns exec $ns0 conntrack -F 2>/dev/null
+ip netns exec $ns0 nft -f - <<EOF
+flush ruleset
+table ip nat {
+ chain postrouting {
+ type nat hook postrouting priority 0;
+ meta oif veth0 ip saddr 172.30.30.0/30 counter masquerade random
+ }
+}
+EOF
+ ip netns exec $ns0 ip vrf exec tvrf iperf3 -t 1 -c $IP1 > /dev/null
+ if [ $? -ne 0 ]; then
+ echo "FAIL: iperf3 connect failure with masquerade + sport rewrite on veth device"
+ ret=1
+ return
+ fi
+
+ # must also check that nat table was evaluated on second (lower device) iteration.
+ ip netns exec $ns0 nft list table ip nat |grep -q 'counter packets 2'
+ if [ $? -eq 0 ]; then
+ echo "PASS: iperf3 connect with masquerade + sport rewrite on veth device"
+ else
+ echo "FAIL: vrf masq rule has unexpected counter value"
+ ret=1
+ fi
+}
+
+test_ct_zone_in
+test_masquerade_vrf
+test_masquerade_veth
+
+exit $ret
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 17/88] vrf: dont run conntrack on vrf with !dflt qdisc
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (15 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 16/88] selftests: netfilter: add a vrf+conntrack testcase Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 18/88] bpf: Fix the off-by-two error in range markings Greg Kroah-Hartman
` (77 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nicolas Dichtel, Florian Westphal,
David Ahern, Pablo Neira Ayuso
From: Nicolas Dichtel <nicolas.dichtel@6wind.com>
commit d43b75fbc23f0ac1ef9c14a5a166d3ccb761a451 upstream.
After the below patch, the conntrack attached to skb is set to "notrack" in
the context of vrf device, for locally generated packets.
But this is true only when the default qdisc is set to the vrf device. When
changing the qdisc, notrack is not set anymore.
In fact, there is a shortcut in the vrf driver, when the default qdisc is
set, see commit dcdd43c41e60 ("net: vrf: performance improvements for
IPv4") for more details.
This patch ensures that the behavior is always the same, whatever the qdisc
is.
To demonstrate the difference, a new test is added in conntrack_vrf.sh.
Fixes: 8c9c296adfae ("vrf: run conntrack only in context of lower/physdev for locally generated packets")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/vrf.c | 8 ++---
tools/testing/selftests/netfilter/conntrack_vrf.sh | 30 ++++++++++++++++++---
2 files changed, 30 insertions(+), 8 deletions(-)
--- a/drivers/net/vrf.c
+++ b/drivers/net/vrf.c
@@ -495,8 +495,6 @@ static struct sk_buff *vrf_ip6_out_direc
skb->dev = vrf_dev;
- vrf_nf_set_untracked(skb);
-
err = nf_hook(NFPROTO_IPV6, NF_INET_LOCAL_OUT, net, sk,
skb, NULL, vrf_dev, vrf_ip6_out_direct_finish);
@@ -517,6 +515,8 @@ static struct sk_buff *vrf_ip6_out(struc
if (rt6_need_strict(&ipv6_hdr(skb)->daddr))
return skb;
+ vrf_nf_set_untracked(skb);
+
if (qdisc_tx_is_default(vrf_dev) ||
IP6CB(skb)->flags & IP6SKB_XFRM_TRANSFORMED)
return vrf_ip6_out_direct(vrf_dev, sk, skb);
@@ -732,8 +732,6 @@ static struct sk_buff *vrf_ip_out_direct
skb->dev = vrf_dev;
- vrf_nf_set_untracked(skb);
-
err = nf_hook(NFPROTO_IPV4, NF_INET_LOCAL_OUT, net, sk,
skb, NULL, vrf_dev, vrf_ip_out_direct_finish);
@@ -755,6 +753,8 @@ static struct sk_buff *vrf_ip_out(struct
ipv4_is_lbcast(ip_hdr(skb)->daddr))
return skb;
+ vrf_nf_set_untracked(skb);
+
if (qdisc_tx_is_default(vrf_dev) ||
IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED)
return vrf_ip_out_direct(vrf_dev, sk, skb);
--- a/tools/testing/selftests/netfilter/conntrack_vrf.sh
+++ b/tools/testing/selftests/netfilter/conntrack_vrf.sh
@@ -150,11 +150,27 @@ EOF
# oifname is the vrf device.
test_masquerade_vrf()
{
+ local qdisc=$1
+
+ if [ "$qdisc" != "default" ]; then
+ tc -net $ns0 qdisc add dev tvrf root $qdisc
+ fi
+
ip netns exec $ns0 conntrack -F 2>/dev/null
ip netns exec $ns0 nft -f - <<EOF
flush ruleset
table ip nat {
+ chain rawout {
+ type filter hook output priority raw;
+
+ oif tvrf ct state untracked counter
+ }
+ chain postrouting2 {
+ type filter hook postrouting priority mangle;
+
+ oif tvrf ct state untracked counter
+ }
chain postrouting {
type nat hook postrouting priority 0;
# NB: masquerade should always be combined with 'oif(name) bla',
@@ -171,13 +187,18 @@ EOF
fi
# must also check that nat table was evaluated on second (lower device) iteration.
- ip netns exec $ns0 nft list table ip nat |grep -q 'counter packets 2'
+ ip netns exec $ns0 nft list table ip nat |grep -q 'counter packets 2' &&
+ ip netns exec $ns0 nft list table ip nat |grep -q 'untracked counter packets [1-9]'
if [ $? -eq 0 ]; then
- echo "PASS: iperf3 connect with masquerade + sport rewrite on vrf device"
+ echo "PASS: iperf3 connect with masquerade + sport rewrite on vrf device ($qdisc qdisc)"
else
- echo "FAIL: vrf masq rule has unexpected counter value"
+ echo "FAIL: vrf rules have unexpected counter value"
ret=1
fi
+
+ if [ "$qdisc" != "default" ]; then
+ tc -net $ns0 qdisc del dev tvrf root
+ fi
}
# add masq rule that gets evaluated w. outif set to veth device.
@@ -213,7 +234,8 @@ EOF
}
test_ct_zone_in
-test_masquerade_vrf
+test_masquerade_vrf "default"
+test_masquerade_vrf "pfifo"
test_masquerade_veth
exit $ret
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 18/88] bpf: Fix the off-by-two error in range markings
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (16 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 17/88] vrf: dont run conntrack on vrf with !dflt qdisc Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 19/88] ice: ignore dropped packets during init Greg Kroah-Hartman
` (76 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maxim Mikityanskiy, Daniel Borkmann
From: Maxim Mikityanskiy <maximmi@nvidia.com>
commit 2fa7d94afc1afbb4d702760c058dc2d7ed30f226 upstream.
The first commit cited below attempts to fix the off-by-one error that
appeared in some comparisons with an open range. Due to this error,
arithmetically equivalent pieces of code could get different verdicts
from the verifier, for example (pseudocode):
// 1. Passes the verifier:
if (data + 8 > data_end)
return early
read *(u64 *)data, i.e. [data; data+7]
// 2. Rejected by the verifier (should still pass):
if (data + 7 >= data_end)
return early
read *(u64 *)data, i.e. [data; data+7]
The attempted fix, however, shifts the range by one in a wrong
direction, so the bug not only remains, but also such piece of code
starts failing in the verifier:
// 3. Rejected by the verifier, but the check is stricter than in #1.
if (data + 8 >= data_end)
return early
read *(u64 *)data, i.e. [data; data+7]
The change performed by that fix converted an off-by-one bug into
off-by-two. The second commit cited below added the BPF selftests
written to ensure than code chunks like #3 are rejected, however,
they should be accepted.
This commit fixes the off-by-two error by adjusting new_range in the
right direction and fixes the tests by changing the range into the
one that should actually fail.
Fixes: fb2a311a31d3 ("bpf: fix off by one for range markings with L{T, E} patterns")
Fixes: b37242c773b2 ("bpf: add test cases to bpf selftests to cover all access tests")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211130181607.593149-1-maximmi@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/bpf/verifier.c | 2
tools/testing/selftests/bpf/verifier/xdp_direct_packet_access.c | 32 +++++-----
2 files changed, 17 insertions(+), 17 deletions(-)
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -5372,7 +5372,7 @@ static void find_good_pkt_pointers(struc
new_range = dst_reg->off;
if (range_right_open)
- new_range--;
+ new_range++;
/* Examples for register markings:
*
--- a/tools/testing/selftests/bpf/verifier/xdp_direct_packet_access.c
+++ b/tools/testing/selftests/bpf/verifier/xdp_direct_packet_access.c
@@ -112,10 +112,10 @@
BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
offsetof(struct xdp_md, data_end)),
BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
- BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6),
BPF_JMP_REG(BPF_JGT, BPF_REG_3, BPF_REG_1, 1),
BPF_JMP_IMM(BPF_JA, 0, 0, 1),
- BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6),
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_EXIT_INSN(),
},
@@ -167,10 +167,10 @@
BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
offsetof(struct xdp_md, data_end)),
BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
- BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6),
BPF_JMP_REG(BPF_JLT, BPF_REG_1, BPF_REG_3, 1),
BPF_JMP_IMM(BPF_JA, 0, 0, 1),
- BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6),
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_EXIT_INSN(),
},
@@ -274,9 +274,9 @@
BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
offsetof(struct xdp_md, data_end)),
BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
- BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6),
BPF_JMP_REG(BPF_JGE, BPF_REG_1, BPF_REG_3, 1),
- BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6),
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_EXIT_INSN(),
},
@@ -437,9 +437,9 @@
BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
offsetof(struct xdp_md, data_end)),
BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
- BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6),
BPF_JMP_REG(BPF_JLE, BPF_REG_3, BPF_REG_1, 1),
- BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6),
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_EXIT_INSN(),
},
@@ -544,10 +544,10 @@
offsetof(struct xdp_md, data_meta)),
BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
- BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6),
BPF_JMP_REG(BPF_JGT, BPF_REG_3, BPF_REG_1, 1),
BPF_JMP_IMM(BPF_JA, 0, 0, 1),
- BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6),
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_EXIT_INSN(),
},
@@ -599,10 +599,10 @@
offsetof(struct xdp_md, data_meta)),
BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
- BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6),
BPF_JMP_REG(BPF_JLT, BPF_REG_1, BPF_REG_3, 1),
BPF_JMP_IMM(BPF_JA, 0, 0, 1),
- BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6),
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_EXIT_INSN(),
},
@@ -706,9 +706,9 @@
offsetof(struct xdp_md, data_meta)),
BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
- BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6),
BPF_JMP_REG(BPF_JGE, BPF_REG_1, BPF_REG_3, 1),
- BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6),
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_EXIT_INSN(),
},
@@ -869,9 +869,9 @@
offsetof(struct xdp_md, data_meta)),
BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
- BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 6),
BPF_JMP_REG(BPF_JLE, BPF_REG_3, BPF_REG_1, 1),
- BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -6),
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_EXIT_INSN(),
},
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 19/88] ice: ignore dropped packets during init
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (17 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 18/88] bpf: Fix the off-by-two error in range markings Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 20/88] bonding: make tx_rebalance_counter an atomic Greg Kroah-Hartman
` (75 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jesse Brandeburg, Gurucharan G, Tony Nguyen
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
commit 28dc1b86f8ea9fd6f4c9e0b363db73ecabf84e22 upstream.
If the hardware is constantly receiving unicast or broadcast packets
during driver load, the device previously counted many GLV_RDPC (VSI
dropped packets) events during init. This causes confusing dropped
packet statistics during driver load. The dropped packets counter
incrementing does stop once the driver finishes loading.
Avoid this problem by baselining our statistics at the end of driver
open instead of the end of probe.
Fixes: cdedef59deb0 ("ice: Configure VSIs for Tx/Rx")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/intel/ice/ice_main.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -3561,6 +3561,9 @@ static int ice_up_complete(struct ice_vs
netif_carrier_on(vsi->netdev);
}
+ /* clear this now, and the first stats read will be used as baseline */
+ vsi->stat_offsets_loaded = false;
+
ice_service_task_schedule(pf);
return 0;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 20/88] bonding: make tx_rebalance_counter an atomic
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (18 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 19/88] ice: ignore dropped packets during init Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 21/88] nfp: Fix memory leak in nfp_cpp_area_cache_add() Greg Kroah-Hartman
` (74 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, syzbot, David S. Miller
From: Eric Dumazet <edumazet@google.com>
commit dac8e00fb640e9569cdeefd3ce8a75639e5d0711 upstream.
KCSAN reported a data-race [1] around tx_rebalance_counter
which can be accessed from different contexts, without
the protection of a lock/mutex.
[1]
BUG: KCSAN: data-race in bond_alb_init_slave / bond_alb_monitor
write to 0xffff888157e8ca24 of 4 bytes by task 7075 on cpu 0:
bond_alb_init_slave+0x713/0x860 drivers/net/bonding/bond_alb.c:1613
bond_enslave+0xd94/0x3010 drivers/net/bonding/bond_main.c:1949
do_set_master net/core/rtnetlink.c:2521 [inline]
__rtnl_newlink net/core/rtnetlink.c:3475 [inline]
rtnl_newlink+0x1298/0x13b0 net/core/rtnetlink.c:3506
rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5571
netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2491
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5589
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x5fc/0x6c0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x6e1/0x7d0 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmsg+0x195/0x230 net/socket.c:2492
__do_sys_sendmsg net/socket.c:2501 [inline]
__se_sys_sendmsg net/socket.c:2499 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2499
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff888157e8ca24 of 4 bytes by task 1082 on cpu 1:
bond_alb_monitor+0x8f/0xc00 drivers/net/bonding/bond_alb.c:1511
process_one_work+0x3fc/0x980 kernel/workqueue.c:2298
worker_thread+0x616/0xa70 kernel/workqueue.c:2445
kthread+0x2c7/0x2e0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30
value changed: 0x00000001 -> 0x00000064
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 1082 Comm: kworker/u4:3 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: bond1 bond_alb_monitor
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/bonding/bond_alb.c | 14 ++++++++------
include/net/bond_alb.h | 2 +-
2 files changed, 9 insertions(+), 7 deletions(-)
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -1514,14 +1514,14 @@ void bond_alb_monitor(struct work_struct
struct slave *slave;
if (!bond_has_slaves(bond)) {
- bond_info->tx_rebalance_counter = 0;
+ atomic_set(&bond_info->tx_rebalance_counter, 0);
bond_info->lp_counter = 0;
goto re_arm;
}
rcu_read_lock();
- bond_info->tx_rebalance_counter++;
+ atomic_inc(&bond_info->tx_rebalance_counter);
bond_info->lp_counter++;
/* send learning packets */
@@ -1543,7 +1543,7 @@ void bond_alb_monitor(struct work_struct
}
/* rebalance tx traffic */
- if (bond_info->tx_rebalance_counter >= BOND_TLB_REBALANCE_TICKS) {
+ if (atomic_read(&bond_info->tx_rebalance_counter) >= BOND_TLB_REBALANCE_TICKS) {
bond_for_each_slave_rcu(bond, slave, iter) {
tlb_clear_slave(bond, slave, 1);
if (slave == rcu_access_pointer(bond->curr_active_slave)) {
@@ -1553,7 +1553,7 @@ void bond_alb_monitor(struct work_struct
bond_info->unbalanced_load = 0;
}
}
- bond_info->tx_rebalance_counter = 0;
+ atomic_set(&bond_info->tx_rebalance_counter, 0);
}
if (bond_info->rlb_enabled) {
@@ -1623,7 +1623,8 @@ int bond_alb_init_slave(struct bonding *
tlb_init_slave(slave);
/* order a rebalance ASAP */
- bond->alb_info.tx_rebalance_counter = BOND_TLB_REBALANCE_TICKS;
+ atomic_set(&bond->alb_info.tx_rebalance_counter,
+ BOND_TLB_REBALANCE_TICKS);
if (bond->alb_info.rlb_enabled)
bond->alb_info.rlb_rebalance = 1;
@@ -1660,7 +1661,8 @@ void bond_alb_handle_link_change(struct
rlb_clear_slave(bond, slave);
} else if (link == BOND_LINK_UP) {
/* order a rebalance ASAP */
- bond_info->tx_rebalance_counter = BOND_TLB_REBALANCE_TICKS;
+ atomic_set(&bond_info->tx_rebalance_counter,
+ BOND_TLB_REBALANCE_TICKS);
if (bond->alb_info.rlb_enabled) {
bond->alb_info.rlb_rebalance = 1;
/* If the updelay module parameter is smaller than the
--- a/include/net/bond_alb.h
+++ b/include/net/bond_alb.h
@@ -126,7 +126,7 @@ struct tlb_slave_info {
struct alb_bond_info {
struct tlb_client_info *tx_hashtbl; /* Dynamically allocated */
u32 unbalanced_load;
- int tx_rebalance_counter;
+ atomic_t tx_rebalance_counter;
int lp_counter;
/* -------- rlb parameters -------- */
int rlb_enabled;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 21/88] nfp: Fix memory leak in nfp_cpp_area_cache_add()
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (19 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 20/88] bonding: make tx_rebalance_counter an atomic Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 22/88] seg6: fix the iif in the IPv6 socket control block Greg Kroah-Hartman
` (73 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jianglei Nie, Simon Horman, Jakub Kicinski
From: Jianglei Nie <niejianglei2021@163.com>
commit c56c96303e9289cc34716b1179597b6f470833de upstream.
In line 800 (#1), nfp_cpp_area_alloc() allocates and initializes a
CPP area structure. But in line 807 (#2), when the cache is allocated
failed, this CPP area structure is not freed, which will result in
memory leak.
We can fix it by freeing the CPP area when the cache is allocated
failed (#2).
792 int nfp_cpp_area_cache_add(struct nfp_cpp *cpp, size_t size)
793 {
794 struct nfp_cpp_area_cache *cache;
795 struct nfp_cpp_area *area;
800 area = nfp_cpp_area_alloc(cpp, NFP_CPP_ID(7, NFP_CPP_ACTION_RW, 0),
801 0, size);
// #1: allocates and initializes
802 if (!area)
803 return -ENOMEM;
805 cache = kzalloc(sizeof(*cache), GFP_KERNEL);
806 if (!cache)
807 return -ENOMEM; // #2: missing free
817 return 0;
818 }
Fixes: 4cb584e0ee7d ("nfp: add CPP access core")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20211209061511.122535-1-niejianglei2021@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c
+++ b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c
@@ -803,8 +803,10 @@ int nfp_cpp_area_cache_add(struct nfp_cp
return -ENOMEM;
cache = kzalloc(sizeof(*cache), GFP_KERNEL);
- if (!cache)
+ if (!cache) {
+ nfp_cpp_area_free(area);
return -ENOMEM;
+ }
cache->id = 0;
cache->addr = 0;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 22/88] seg6: fix the iif in the IPv6 socket control block
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (20 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 21/88] nfp: Fix memory leak in nfp_cpp_area_cache_add() Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 23/88] udp: using datalen to cap max gso segments Greg Kroah-Hartman
` (72 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrea Mayer, David Ahern, Jakub Kicinski
From: Andrea Mayer <andrea.mayer@uniroma2.it>
commit ae68d93354e5bf5191ee673982251864ea24dd5c upstream.
When an IPv4 packet is received, the ip_rcv_core(...) sets the receiving
interface index into the IPv4 socket control block (v5.16-rc4,
net/ipv4/ip_input.c line 510):
IPCB(skb)->iif = skb->skb_iif;
If that IPv4 packet is meant to be encapsulated in an outer IPv6+SRH
header, the seg6_do_srh_encap(...) performs the required encapsulation.
In this case, the seg6_do_srh_encap function clears the IPv6 socket control
block (v5.16-rc4 net/ipv6/seg6_iptunnel.c line 163):
memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));
The memset(...) was introduced in commit ef489749aae5 ("ipv6: sr: clear
IP6CB(skb) on SRH ip4ip6 encapsulation") a long time ago (2019-01-29).
Since the IPv6 socket control block and the IPv4 socket control block share
the same memory area (skb->cb), the receiving interface index info is lost
(IP6CB(skb)->iif is set to zero).
As a side effect, that condition triggers a NULL pointer dereference if
commit 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig
netdev") is applied.
To fix that issue, we set the IP6CB(skb)->iif with the index of the
receiving interface once again.
Fixes: ef489749aae5 ("ipv6: sr: clear IP6CB(skb) on SRH ip4ip6 encapsulation")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211208195409.12169-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv6/seg6_iptunnel.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/net/ipv6/seg6_iptunnel.c
+++ b/net/ipv6/seg6_iptunnel.c
@@ -143,6 +143,14 @@ int seg6_do_srh_encap(struct sk_buff *sk
hdr->hop_limit = ip6_dst_hoplimit(skb_dst(skb));
memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));
+
+ /* the control block has been erased, so we have to set the
+ * iif once again.
+ * We read the receiving interface index directly from the
+ * skb->skb_iif as it is done in the IPv4 receiving path (i.e.:
+ * ip_rcv_core(...)).
+ */
+ IP6CB(skb)->iif = skb->skb_iif;
}
hdr->nexthdr = NEXTHDR_ROUTING;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 23/88] udp: using datalen to cap max gso segments
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (21 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 22/88] seg6: fix the iif in the IPv6 socket control block Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 24/88] iavf: restore MSI state on reset Greg Kroah-Hartman
` (71 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jianguo Wu, Willem de Bruijn, Jakub Kicinski
From: Jianguo Wu <wujianguo@chinatelecom.cn>
commit 158390e45612ef0fde160af0826f1740c36daf21 upstream.
The max number of UDP gso segments is intended to cap to UDP_MAX_SEGMENTS,
this is checked in udp_send_skb():
if (skb->len > cork->gso_size * UDP_MAX_SEGMENTS) {
kfree_skb(skb);
return -EINVAL;
}
skb->len contains network and transport header len here, we should use
only data len instead.
Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/900742e5-81fb-30dc-6e0b-375c6cdd7982@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/udp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -845,7 +845,7 @@ static int udp_send_skb(struct sk_buff *
kfree_skb(skb);
return -EINVAL;
}
- if (skb->len > cork->gso_size * UDP_MAX_SEGMENTS) {
+ if (datalen > cork->gso_size * UDP_MAX_SEGMENTS) {
kfree_skb(skb);
return -EINVAL;
}
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 24/88] iavf: restore MSI state on reset
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (22 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 23/88] udp: using datalen to cap max gso segments Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 25/88] iavf: Fix reporting when setting descriptor count Greg Kroah-Hartman
` (70 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mitch Williams,
George Kuruvinakunnel, Tony Nguyen
From: Mitch Williams <mitch.a.williams@intel.com>
commit 7e4dcc13965c57869684d57a1dc6dd7be589488c upstream.
If the PF experiences an FLR, the VF's MSI and MSI-X configuration will
be conveniently and silently removed in the process. When this happens,
reset recovery will appear to complete normally but no traffic will
pass. The netdev watchdog will helpfully notify everyone of this issue.
To prevent such public embarrassment, restore MSI configuration at every
reset. For normal resets, this will do no harm, but for VF resets
resulting from a PF FLR, this will keep the VF working.
Fixes: 5eae00c57f5e ("i40evf: main driver core")
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/intel/iavf/iavf_main.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -2151,6 +2151,7 @@ static void iavf_reset_task(struct work_
}
pci_set_master(adapter->pdev);
+ pci_restore_msi_state(adapter->pdev);
if (i == IAVF_RESET_WAIT_COUNT) {
dev_err(&adapter->pdev->dev, "Reset never finished (%x)\n",
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 25/88] iavf: Fix reporting when setting descriptor count
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (23 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 24/88] iavf: restore MSI state on reset Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 26/88] IB/hfi1: Correct guard on eager buffer deallocation Greg Kroah-Hartman
` (69 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Anirudh Venkataramanan,
Michal Maloszewski, Konrad Jankowski, Tony Nguyen
From: Michal Maloszewski <michal.maloszewski@intel.com>
commit 1a1aa356ddf3f16539f5962c01c5f702686dfc15 upstream.
iavf_set_ringparams doesn't communicate to the user that
1. The user requested descriptor count is out of range. Instead it
just quietly sets descriptors to the "clamped" value and calls it
done. This makes it look an invalid value was successfully set as
the descriptor count when this isn't actually true.
2. The user provided descriptor count needs to be inflated for alignment
reasons.
This behavior is confusing. The ice driver has already addressed this
by rejecting invalid values for descriptor count and
messaging for alignment adjustments.
Do the same thing here by adding the error and info messages.
Fixes: fbb7ddfef253 ("i40evf: core ethtool functionality")
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 45 ++++++++++++++++++-------
1 file changed, 33 insertions(+), 12 deletions(-)
--- a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
@@ -612,23 +612,44 @@ static int iavf_set_ringparam(struct net
if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
return -EINVAL;
- new_tx_count = clamp_t(u32, ring->tx_pending,
- IAVF_MIN_TXD,
- IAVF_MAX_TXD);
- new_tx_count = ALIGN(new_tx_count, IAVF_REQ_DESCRIPTOR_MULTIPLE);
-
- new_rx_count = clamp_t(u32, ring->rx_pending,
- IAVF_MIN_RXD,
- IAVF_MAX_RXD);
- new_rx_count = ALIGN(new_rx_count, IAVF_REQ_DESCRIPTOR_MULTIPLE);
+ if (ring->tx_pending > IAVF_MAX_TXD ||
+ ring->tx_pending < IAVF_MIN_TXD ||
+ ring->rx_pending > IAVF_MAX_RXD ||
+ ring->rx_pending < IAVF_MIN_RXD) {
+ netdev_err(netdev, "Descriptors requested (Tx: %d / Rx: %d) out of range [%d-%d] (increment %d)\n",
+ ring->tx_pending, ring->rx_pending, IAVF_MIN_TXD,
+ IAVF_MAX_RXD, IAVF_REQ_DESCRIPTOR_MULTIPLE);
+ return -EINVAL;
+ }
+
+ new_tx_count = ALIGN(ring->tx_pending, IAVF_REQ_DESCRIPTOR_MULTIPLE);
+ if (new_tx_count != ring->tx_pending)
+ netdev_info(netdev, "Requested Tx descriptor count rounded up to %d\n",
+ new_tx_count);
+
+ new_rx_count = ALIGN(ring->rx_pending, IAVF_REQ_DESCRIPTOR_MULTIPLE);
+ if (new_rx_count != ring->rx_pending)
+ netdev_info(netdev, "Requested Rx descriptor count rounded up to %d\n",
+ new_rx_count);
/* if nothing to do return success */
if ((new_tx_count == adapter->tx_desc_count) &&
- (new_rx_count == adapter->rx_desc_count))
+ (new_rx_count == adapter->rx_desc_count)) {
+ netdev_dbg(netdev, "Nothing to change, descriptor count is same as requested\n");
return 0;
+ }
+
+ if (new_tx_count != adapter->tx_desc_count) {
+ netdev_dbg(netdev, "Changing Tx descriptor count from %d to %d\n",
+ adapter->tx_desc_count, new_tx_count);
+ adapter->tx_desc_count = new_tx_count;
+ }
- adapter->tx_desc_count = new_tx_count;
- adapter->rx_desc_count = new_rx_count;
+ if (new_rx_count != adapter->rx_desc_count) {
+ netdev_dbg(netdev, "Changing Rx descriptor count from %d to %d\n",
+ adapter->rx_desc_count, new_rx_count);
+ adapter->rx_desc_count = new_rx_count;
+ }
if (netif_running(netdev)) {
adapter->flags |= IAVF_FLAG_RESET_NEEDED;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 26/88] IB/hfi1: Correct guard on eager buffer deallocation
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (24 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 25/88] iavf: Fix reporting when setting descriptor count Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 27/88] mm: bdi: initialize bdi_min_ratio when bdi is unregistered Greg Kroah-Hartman
` (68 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mike Marciniszyn, Dennis Dalessandro,
Jason Gunthorpe
From: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
commit 9292f8f9a2ac42eb320bced7153aa2e63d8cc13a upstream.
The code tests the dma address which legitimately can be 0.
The code should test the kernel logical address to avoid leaking eager
buffer allocations that happen to map to a dma address of 0.
Fixes: 60368186fd85 ("IB/hfi1: Fix user-space buffers mapping with IOMMU enabled")
Link: https://lore.kernel.org/r/20211129191952.101968.17137.stgit@awfm-01.cornelisnetworks.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/infiniband/hw/hfi1/init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/infiniband/hw/hfi1/init.c
+++ b/drivers/infiniband/hw/hfi1/init.c
@@ -1175,7 +1175,7 @@ void hfi1_free_ctxtdata(struct hfi1_devd
rcd->egrbufs.rcvtids = NULL;
for (e = 0; e < rcd->egrbufs.alloced; e++) {
- if (rcd->egrbufs.buffers[e].dma)
+ if (rcd->egrbufs.buffers[e].addr)
dma_free_coherent(&dd->pcidev->dev,
rcd->egrbufs.buffers[e].len,
rcd->egrbufs.buffers[e].addr,
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 27/88] mm: bdi: initialize bdi_min_ratio when bdi is unregistered
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (25 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 26/88] IB/hfi1: Correct guard on eager buffer deallocation Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 28/88] ALSA: ctl: Fix copy of updated id with element read/write Greg Kroah-Hartman
` (67 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Manjong Lee, Peter Zijlstra (Intel),
Changheun Lee, Jens Axboe, Christoph Hellwig, Matthew Wilcox,
seunghwan.hyun, sookwan7.kim, yt0928.kim, junho89.kim,
jisoo2146.oh, Andrew Morton, Linus Torvalds
From: Manjong Lee <mj0123.lee@samsung.com>
commit 3c376dfafbf7a8ea0dea212d095ddd83e93280bb upstream.
Initialize min_ratio if it is set during bdi unregistration. This can
prevent problems that may occur a when bdi is removed without resetting
min_ratio.
For example.
1) insert external sdcard
2) set external sdcard's min_ratio 70
3) remove external sdcard without setting min_ratio 0
4) insert external sdcard
5) set external sdcard's min_ratio 70 << error occur(can't set)
Because when an sdcard is removed, the present bdi_min_ratio value will
remain. Currently, the only way to reset bdi_min_ratio is to reboot.
[akpm@linux-foundation.org: tweak comment and coding style]
Link: https://lkml.kernel.org/r/20211021161942.5983-1-mj0123.lee@samsung.com
Signed-off-by: Manjong Lee <mj0123.lee@samsung.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Changheun Lee <nanich.lee@samsung.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <seunghwan.hyun@samsung.com>
Cc: <sookwan7.kim@samsung.com>
Cc: <yt0928.kim@samsung.com>
Cc: <junho89.kim@samsung.com>
Cc: <jisoo2146.oh@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/backing-dev.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -1013,6 +1013,13 @@ void bdi_unregister(struct backing_dev_i
wb_shutdown(&bdi->wb);
cgwb_bdi_unregister(bdi);
+ /*
+ * If this BDI's min ratio has been set, use bdi_set_min_ratio() to
+ * update the global bdi_min_ratio.
+ */
+ if (bdi->min_ratio)
+ bdi_set_min_ratio(bdi, 0);
+
if (bdi->dev) {
bdi_debug_unregister(bdi);
device_unregister(bdi->dev);
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 28/88] ALSA: ctl: Fix copy of updated id with element read/write
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (26 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 27/88] mm: bdi: initialize bdi_min_ratio when bdi is unregistered Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:29 ` [PATCH 5.4 29/88] ALSA: hda/realtek - Add headset Mic support for Lenovo ALC897 platform Greg Kroah-Hartman
` (66 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alan Young, Takashi Iwai
From: Alan Young <consult.awy@gmail.com>
commit b6409dd6bdc03aa178bbff0d80db2a30d29b63ac upstream.
When control_compat.c:copy_ctl_value_to_user() is used, by
ctl_elem_read_user() & ctl_elem_write_user(), it must also copy back the
snd_ctl_elem_id value that may have been updated (filled in) by the call
to snd_ctl_elem_read/snd_ctl_elem_write().
This matches the functionality provided by snd_ctl_elem_read_user() and
snd_ctl_elem_write_user(), via snd_ctl_build_ioff().
Without this, and without making additional calls to snd_ctl_info()
which are unnecessary when using the non-compat calls, a userspace
application will not know the numid value for the element and
consequently will not be able to use the poll/read interface on the
control file to determine which elements have updates.
Signed-off-by: Alan Young <consult.awy@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211202150607.543389-1-consult.awy@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/core/control_compat.c | 3 +++
1 file changed, 3 insertions(+)
--- a/sound/core/control_compat.c
+++ b/sound/core/control_compat.c
@@ -266,6 +266,7 @@ static int copy_ctl_value_to_user(void _
struct snd_ctl_elem_value *data,
int type, int count)
{
+ struct snd_ctl_elem_value32 __user *data32 = userdata;
int i, size;
if (type == SNDRV_CTL_ELEM_TYPE_BOOLEAN ||
@@ -282,6 +283,8 @@ static int copy_ctl_value_to_user(void _
if (copy_to_user(valuep, data->value.bytes.data, size))
return -EFAULT;
}
+ if (copy_to_user(&data32->id, &data->id, sizeof(data32->id)))
+ return -EFAULT;
return 0;
}
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 29/88] ALSA: hda/realtek - Add headset Mic support for Lenovo ALC897 platform
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (27 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 28/88] ALSA: ctl: Fix copy of updated id with element read/write Greg Kroah-Hartman
@ 2021-12-13 9:29 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 30/88] ALSA: pcm: oss: Fix negative period/buffer sizes Greg Kroah-Hartman
` (65 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:29 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Kailang Yang, Takashi Iwai
From: Kailang Yang <kailang@realtek.com>
commit d7f32791a9fcf0dae8b073cdea9b79e29098c5f4 upstream.
Lenovo ALC897 platform had headset Mic.
This patch enable supported headset Mic.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/baab2c2536cb4cc18677a862c6f6d840@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9620,6 +9620,27 @@ static void alc671_fixup_hp_headset_mic2
}
}
+static void alc897_hp_automute_hook(struct hda_codec *codec,
+ struct hda_jack_callback *jack)
+{
+ struct alc_spec *spec = codec->spec;
+ int vref;
+
+ snd_hda_gen_hp_automute(codec, jack);
+ vref = spec->gen.hp_jack_present ? (PIN_HP | AC_PINCTL_VREF_100) : PIN_HP;
+ snd_hda_codec_write(codec, 0x1b, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ vref);
+}
+
+static void alc897_fixup_lenovo_headset_mic(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ struct alc_spec *spec = codec->spec;
+ if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+ spec->gen.hp_automute_hook = alc897_hp_automute_hook;
+ }
+}
+
static const struct coef_fw alc668_coefs[] = {
WRITE_COEF(0x01, 0xbebe), WRITE_COEF(0x02, 0xaaaa), WRITE_COEF(0x03, 0x0),
WRITE_COEF(0x04, 0x0180), WRITE_COEF(0x06, 0x0), WRITE_COEF(0x07, 0x0f80),
@@ -9700,6 +9721,8 @@ enum {
ALC668_FIXUP_ASUS_NO_HEADSET_MIC,
ALC668_FIXUP_HEADSET_MIC,
ALC668_FIXUP_MIC_DET_COEF,
+ ALC897_FIXUP_LENOVO_HEADSET_MIC,
+ ALC897_FIXUP_HEADSET_MIC_PIN,
};
static const struct hda_fixup alc662_fixups[] = {
@@ -10106,6 +10129,19 @@ static const struct hda_fixup alc662_fix
{}
},
},
+ [ALC897_FIXUP_LENOVO_HEADSET_MIC] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc897_fixup_lenovo_headset_mic,
+ },
+ [ALC897_FIXUP_HEADSET_MIC_PIN] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ { 0x1a, 0x03a11050 },
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC897_FIXUP_LENOVO_HEADSET_MIC
+ },
};
static const struct snd_pci_quirk alc662_fixup_tbl[] = {
@@ -10150,6 +10186,10 @@ static const struct snd_pci_quirk alc662
SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
SND_PCI_QUIRK(0x14cd, 0x5003, "USI", ALC662_FIXUP_USI_HEADSET_MODE),
SND_PCI_QUIRK(0x17aa, 0x1036, "Lenovo P520", ALC662_FIXUP_LENOVO_MULTI_CODECS),
+ SND_PCI_QUIRK(0x17aa, 0x32ca, "Lenovo ThinkCentre M80", ALC897_FIXUP_HEADSET_MIC_PIN),
+ SND_PCI_QUIRK(0x17aa, 0x32cb, "Lenovo ThinkCentre M70", ALC897_FIXUP_HEADSET_MIC_PIN),
+ SND_PCI_QUIRK(0x17aa, 0x32cf, "Lenovo ThinkCentre M950", ALC897_FIXUP_HEADSET_MIC_PIN),
+ SND_PCI_QUIRK(0x17aa, 0x32f7, "Lenovo ThinkCentre M90", ALC897_FIXUP_HEADSET_MIC_PIN),
SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD),
SND_PCI_QUIRK(0x1849, 0x5892, "ASRock B150M", ALC892_FIXUP_ASROCK_MOBO),
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 30/88] ALSA: pcm: oss: Fix negative period/buffer sizes
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (28 preceding siblings ...)
2021-12-13 9:29 ` [PATCH 5.4 29/88] ALSA: hda/realtek - Add headset Mic support for Lenovo ALC897 platform Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 31/88] ALSA: pcm: oss: Limit the period size to 16MB Greg Kroah-Hartman
` (64 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+bb348e9f9a954d42746f,
Bixuan Cui, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit 9d2479c960875ca1239bcb899f386970c13d9cfe upstream.
The period size calculation in OSS layer may receive a negative value
as an error, but the code there assumes only the positive values and
handle them with size_t. Due to that, a too big value may be passed
to the lower layers.
This patch changes the code to handle with ssize_t and adds the proper
error checks appropriately.
Reported-by: syzbot+bb348e9f9a954d42746f@syzkaller.appspotmail.com
Reported-by: Bixuan Cui <cuibixuan@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1638270978-42412-1-git-send-email-cuibixuan@linux.alibaba.com
Link: https://lore.kernel.org/r/20211201073606.11660-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/core/oss/pcm_oss.c | 24 +++++++++++++++---------
1 file changed, 15 insertions(+), 9 deletions(-)
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -147,7 +147,7 @@ snd_pcm_hw_param_value_min(const struct
*
* Return the maximum value for field PAR.
*/
-static unsigned int
+static int
snd_pcm_hw_param_value_max(const struct snd_pcm_hw_params *params,
snd_pcm_hw_param_t var, int *dir)
{
@@ -682,18 +682,24 @@ static int snd_pcm_oss_period_size(struc
struct snd_pcm_hw_params *oss_params,
struct snd_pcm_hw_params *slave_params)
{
- size_t s;
- size_t oss_buffer_size, oss_period_size, oss_periods;
- size_t min_period_size, max_period_size;
+ ssize_t s;
+ ssize_t oss_buffer_size;
+ ssize_t oss_period_size, oss_periods;
+ ssize_t min_period_size, max_period_size;
struct snd_pcm_runtime *runtime = substream->runtime;
size_t oss_frame_size;
oss_frame_size = snd_pcm_format_physical_width(params_format(oss_params)) *
params_channels(oss_params) / 8;
+ oss_buffer_size = snd_pcm_hw_param_value_max(slave_params,
+ SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
+ NULL);
+ if (oss_buffer_size <= 0)
+ return -EINVAL;
oss_buffer_size = snd_pcm_plug_client_size(substream,
- snd_pcm_hw_param_value_max(slave_params, SNDRV_PCM_HW_PARAM_BUFFER_SIZE, NULL)) * oss_frame_size;
- if (!oss_buffer_size)
+ oss_buffer_size * oss_frame_size);
+ if (oss_buffer_size <= 0)
return -EINVAL;
oss_buffer_size = rounddown_pow_of_two(oss_buffer_size);
if (atomic_read(&substream->mmap_count)) {
@@ -730,7 +736,7 @@ static int snd_pcm_oss_period_size(struc
min_period_size = snd_pcm_plug_client_size(substream,
snd_pcm_hw_param_value_min(slave_params, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, NULL));
- if (min_period_size) {
+ if (min_period_size > 0) {
min_period_size *= oss_frame_size;
min_period_size = roundup_pow_of_two(min_period_size);
if (oss_period_size < min_period_size)
@@ -739,7 +745,7 @@ static int snd_pcm_oss_period_size(struc
max_period_size = snd_pcm_plug_client_size(substream,
snd_pcm_hw_param_value_max(slave_params, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, NULL));
- if (max_period_size) {
+ if (max_period_size > 0) {
max_period_size *= oss_frame_size;
max_period_size = rounddown_pow_of_two(max_period_size);
if (oss_period_size > max_period_size)
@@ -752,7 +758,7 @@ static int snd_pcm_oss_period_size(struc
oss_periods = substream->oss.setup.periods;
s = snd_pcm_hw_param_value_max(slave_params, SNDRV_PCM_HW_PARAM_PERIODS, NULL);
- if (runtime->oss.maxfrags && s > runtime->oss.maxfrags)
+ if (s > 0 && runtime->oss.maxfrags && s > runtime->oss.maxfrags)
s = runtime->oss.maxfrags;
if (oss_periods > s)
oss_periods = s;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 31/88] ALSA: pcm: oss: Limit the period size to 16MB
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (29 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 30/88] ALSA: pcm: oss: Fix negative period/buffer sizes Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 32/88] ALSA: pcm: oss: Handle missing errors in snd_pcm_oss_change_params*() Greg Kroah-Hartman
` (63 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+bb348e9f9a954d42746f,
Bixuan Cui, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit 8839c8c0f77ab8fc0463f4ab8b37fca3f70677c2 upstream.
Set the practical limit to the period size (the fragment shift in OSS)
instead of a full 31bit; a too large value could lead to the exhaust
of memory as we allocate temporary buffers of the period size, too.
As of this patch, we set to 16MB limit, which should cover all use
cases.
Reported-by: syzbot+bb348e9f9a954d42746f@syzkaller.appspotmail.com
Reported-by: Bixuan Cui <cuibixuan@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1638270978-42412-1-git-send-email-cuibixuan@linux.alibaba.com
Link: https://lore.kernel.org/r/20211201073606.11660-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/core/oss/pcm_oss.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -1952,7 +1952,7 @@ static int snd_pcm_oss_set_fragment1(str
if (runtime->oss.subdivision || runtime->oss.fragshift)
return -EINVAL;
fragshift = val & 0xffff;
- if (fragshift >= 31)
+ if (fragshift >= 25) /* should be large enough */
return -EINVAL;
runtime->oss.fragshift = fragshift;
runtime->oss.maxfrags = (val >> 16) & 0xffff;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 32/88] ALSA: pcm: oss: Handle missing errors in snd_pcm_oss_change_params*()
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (30 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 31/88] ALSA: pcm: oss: Limit the period size to 16MB Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 33/88] btrfs: clear extent buffer uptodate when we fail to write it Greg Kroah-Hartman
` (62 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit 6665bb30a6b1a4a853d52557c05482ee50e71391 upstream.
A couple of calls in snd_pcm_oss_change_params_locked() ignore the
possible errors. Catch those errors and abort the operation for
avoiding further problems.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211201073606.11660-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/core/oss/pcm_oss.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -884,8 +884,15 @@ static int snd_pcm_oss_change_params_loc
err = -EINVAL;
goto failure;
}
- choose_rate(substream, sparams, runtime->oss.rate);
- snd_pcm_hw_param_near(substream, sparams, SNDRV_PCM_HW_PARAM_CHANNELS, runtime->oss.channels, NULL);
+
+ err = choose_rate(substream, sparams, runtime->oss.rate);
+ if (err < 0)
+ goto failure;
+ err = snd_pcm_hw_param_near(substream, sparams,
+ SNDRV_PCM_HW_PARAM_CHANNELS,
+ runtime->oss.channels, NULL);
+ if (err < 0)
+ goto failure;
format = snd_pcm_oss_format_from(runtime->oss.format);
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 33/88] btrfs: clear extent buffer uptodate when we fail to write it
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (31 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 32/88] ALSA: pcm: oss: Handle missing errors in snd_pcm_oss_change_params*() Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 34/88] btrfs: replace the BUG_ON in btrfs_del_root_ref with proper error handling Greg Kroah-Hartman
` (61 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Josef Bacik, David Sterba
From: Josef Bacik <josef@toxicpanda.com>
commit c2e39305299f0118298c2201f6d6cc7d3485f29e upstream.
I got dmesg errors on generic/281 on our overnight fstests. Looking at
the history this happens occasionally, with errors like this
WARNING: CPU: 0 PID: 673217 at fs/btrfs/extent_io.c:6848 assert_eb_page_uptodate+0x3f/0x50
CPU: 0 PID: 673217 Comm: kworker/u4:13 Tainted: G W 5.16.0-rc2+ #469
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Workqueue: btrfs-cache btrfs_work_helper
RIP: 0010:assert_eb_page_uptodate+0x3f/0x50
RSP: 0018:ffffae598230bc60 EFLAGS: 00010246
RAX: 0017ffffc0002112 RBX: ffffebaec4100900 RCX: 0000000000001000
RDX: ffffebaec45733c7 RSI: ffffebaec4100900 RDI: ffff9fd98919f340
RBP: 0000000000000d56 R08: ffff9fd98e300000 R09: 0000000000000000
R10: 0001207370a91c50 R11: 0000000000000000 R12: 00000000000007b0
R13: ffff9fd98919f340 R14: 0000000001500000 R15: 0000000001cb0000
FS: 0000000000000000(0000) GS:ffff9fd9fbc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f549fcf8940 CR3: 0000000114908004 CR4: 0000000000370ef0
Call Trace:
extent_buffer_test_bit+0x3f/0x70
free_space_test_bit+0xa6/0xc0
load_free_space_tree+0x1d6/0x430
caching_thread+0x454/0x630
? rcu_read_lock_sched_held+0x12/0x60
? rcu_read_lock_sched_held+0x12/0x60
? rcu_read_lock_sched_held+0x12/0x60
? lock_release+0x1f0/0x2d0
btrfs_work_helper+0xf2/0x3e0
? lock_release+0x1f0/0x2d0
? finish_task_switch.isra.0+0xf9/0x3a0
process_one_work+0x270/0x5a0
worker_thread+0x55/0x3c0
? process_one_work+0x5a0/0x5a0
kthread+0x174/0x1a0
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
This happens because we're trying to read from a extent buffer page that
is !PageUptodate. This happens because we will clear the page uptodate
when we have an IO error, but we don't clear the extent buffer uptodate.
If we do a read later and find this extent buffer we'll think its valid
and not return an error, and then trip over this warning.
Fix this by also clearing uptodate on the extent buffer when this
happens, so that we get an error when we do a btrfs_search_slot() and
find this block later.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/extent_io.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -3755,6 +3755,12 @@ static void set_btree_ioerr(struct page
return;
/*
+ * A read may stumble upon this buffer later, make sure that it gets an
+ * error and knows there was an error.
+ */
+ clear_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags);
+
+ /*
* If we error out, we should add back the dirty_metadata_bytes
* to make it consistent.
*/
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 34/88] btrfs: replace the BUG_ON in btrfs_del_root_ref with proper error handling
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (32 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 33/88] btrfs: clear extent buffer uptodate when we fail to write it Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 35/88] nfsd: Fix nsfd startup race (again) Greg Kroah-Hartman
` (60 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Josef Bacik, Qu Wenruo, David Sterba
From: Qu Wenruo <wqu@suse.com>
commit 8289ed9f93bef2762f9184e136d994734b16d997 upstream.
I hit the BUG_ON() with generic/475 test case, and to my surprise, all
callers of btrfs_del_root_ref() are already aborting transaction, thus
there is not need for such BUG_ON(), just go to @out label and caller
will properly handle the error.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/root-tree.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/btrfs/root-tree.c
+++ b/fs/btrfs/root-tree.c
@@ -371,7 +371,8 @@ int btrfs_del_root_ref(struct btrfs_tran
key.offset = ref_id;
again:
ret = btrfs_search_slot(trans, tree_root, &key, path, -1, 1);
- BUG_ON(ret < 0);
+ if (ret < 0)
+ goto out;
if (ret == 0) {
leaf = path->nodes[0];
ref = btrfs_item_ptr(leaf, path->slots[0],
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 35/88] nfsd: Fix nsfd startup race (again)
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (33 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 34/88] btrfs: replace the BUG_ON in btrfs_del_root_ref with proper error handling Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 36/88] tracefs: Have new files inherit the ownership of their parent Greg Kroah-Hartman
` (59 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexander Sverdlin, J. Bruce Fields
From: Alexander Sverdlin <alexander.sverdlin@nokia.com>
commit b10252c7ae9c9d7c90552f88b544a44ee773af64 upstream.
Commit bd5ae9288d64 ("nfsd: register pernet ops last, unregister first")
has re-opened rpc_pipefs_event() race against nfsd_net_id registration
(register_pernet_subsys()) which has been fixed by commit bb7ffbf29e76
("nfsd: fix nsfd startup race triggering BUG_ON").
Restore the order of register_pernet_subsys() vs register_cld_notifier().
Add WARN_ON() to prevent a future regression.
Crash info:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000012
CPU: 8 PID: 345 Comm: mount Not tainted 5.4.144-... #1
pc : rpc_pipefs_event+0x54/0x120 [nfsd]
lr : rpc_pipefs_event+0x48/0x120 [nfsd]
Call trace:
rpc_pipefs_event+0x54/0x120 [nfsd]
blocking_notifier_call_chain
rpc_fill_super
get_tree_keyed
rpc_fs_get_tree
vfs_get_tree
do_mount
ksys_mount
__arm64_sys_mount
el0_svc_handler
el0_svc
Fixes: bd5ae9288d64 ("nfsd: register pernet ops last, unregister first")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nfsd/nfs4recover.c | 1 +
fs/nfsd/nfsctl.c | 14 +++++++-------
2 files changed, 8 insertions(+), 7 deletions(-)
--- a/fs/nfsd/nfs4recover.c
+++ b/fs/nfsd/nfs4recover.c
@@ -2177,6 +2177,7 @@ static struct notifier_block nfsd4_cld_b
int
register_cld_notifier(void)
{
+ WARN_ON(!nfsd_net_id);
return rpc_pipefs_notifier_register(&nfsd4_cld_block);
}
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -1526,12 +1526,9 @@ static int __init init_nfsd(void)
int retval;
printk(KERN_INFO "Installing knfsd (copyright (C) 1996 okir@monad.swb.de).\n");
- retval = register_cld_notifier();
- if (retval)
- return retval;
retval = nfsd4_init_slabs();
if (retval)
- goto out_unregister_notifier;
+ return retval;
retval = nfsd4_init_pnfs();
if (retval)
goto out_free_slabs;
@@ -1549,9 +1546,14 @@ static int __init init_nfsd(void)
goto out_free_exports;
retval = register_pernet_subsys(&nfsd_net_ops);
if (retval < 0)
+ goto out_free_filesystem;
+ retval = register_cld_notifier();
+ if (retval)
goto out_free_all;
return 0;
out_free_all:
+ unregister_pernet_subsys(&nfsd_net_ops);
+out_free_filesystem:
unregister_filesystem(&nfsd_fs_type);
out_free_exports:
remove_proc_entry("fs/nfs/exports", NULL);
@@ -1565,13 +1567,12 @@ out_free_stat:
nfsd4_exit_pnfs();
out_free_slabs:
nfsd4_free_slabs();
-out_unregister_notifier:
- unregister_cld_notifier();
return retval;
}
static void __exit exit_nfsd(void)
{
+ unregister_cld_notifier();
unregister_pernet_subsys(&nfsd_net_ops);
nfsd_drc_slab_free();
remove_proc_entry("fs/nfs/exports", NULL);
@@ -1582,7 +1583,6 @@ static void __exit exit_nfsd(void)
nfsd4_exit_pnfs();
nfsd_fault_inject_cleanup();
unregister_filesystem(&nfsd_fs_type);
- unregister_cld_notifier();
}
MODULE_AUTHOR("Olaf Kirch <okir@monad.swb.de>");
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 36/88] tracefs: Have new files inherit the ownership of their parent
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (34 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 35/88] nfsd: Fix nsfd startup race (again) Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 37/88] clk: qcom: regmap-mux: fix parent clock lookup Greg Kroah-Hartman
` (58 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kees Cook, Ingo Molnar,
Andrew Morton, Linus Torvalds, Al Viro, Yabin Cui,
Christian Brauner, Kalesh Singh, Steven Rostedt (VMware)
From: Steven Rostedt (VMware) <rostedt@goodmis.org>
commit ee7f3666995d8537dec17b1d35425f28877671a9 upstream.
If directories in tracefs have their ownership changed, then any new files
and directories that are created under those directories should inherit
the ownership of the director they are created in.
Link: https://lkml.kernel.org/r/20211208075720.4855d180@gandalf.local.home
Cc: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Yabin Cui <yabinc@google.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: stable@vger.kernel.org
Fixes: 4282d60689d4f ("tracefs: Add new tracefs file system")
Reported-by: Kalesh Singh <kaleshsingh@google.com>
Reported: https://lore.kernel.org/all/CAC_TJve8MMAv+H_NdLSJXZUSoxOEq2zB_pVaJ9p=7H6Bu3X76g@mail.gmail.com/
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/tracefs/inode.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/fs/tracefs/inode.c
+++ b/fs/tracefs/inode.c
@@ -409,6 +409,8 @@ struct dentry *tracefs_create_file(const
inode->i_mode = mode;
inode->i_fop = fops ? fops : &tracefs_file_operations;
inode->i_private = data;
+ inode->i_uid = d_inode(dentry->d_parent)->i_uid;
+ inode->i_gid = d_inode(dentry->d_parent)->i_gid;
d_instantiate(dentry, inode);
fsnotify_create(dentry->d_parent->d_inode, dentry);
return end_creating(dentry);
@@ -431,6 +433,8 @@ static struct dentry *__create_dir(const
inode->i_mode = S_IFDIR | S_IRWXU | S_IRUSR| S_IRGRP | S_IXUSR | S_IXGRP;
inode->i_op = ops;
inode->i_fop = &simple_dir_operations;
+ inode->i_uid = d_inode(dentry->d_parent)->i_uid;
+ inode->i_gid = d_inode(dentry->d_parent)->i_gid;
/* directory inodes start off with i_nlink == 2 (for "." entry) */
inc_nlink(inode);
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 37/88] clk: qcom: regmap-mux: fix parent clock lookup
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (35 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 36/88] tracefs: Have new files inherit the ownership of their parent Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 38/88] drm/syncobj: Deal with signalled fences in drm_syncobj_find_fence Greg Kroah-Hartman
` (57 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dmitry Baryshkov, Stephen Boyd
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
commit 9a61f813fcc8d56d85fcf9ca6119cf2b5ac91dd5 upstream.
The function mux_get_parent() uses qcom_find_src_index() to find the
parent clock index, which is incorrect: qcom_find_src_index() uses src
enum for the lookup, while mux_get_parent() should use cfg field (which
corresponds to the register value). Add qcom_find_cfg_index() function
doing this kind of lookup and use it for mux parent lookup.
Fixes: df964016490b ("clk: qcom: add parent map for regmap mux")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211115233407.1046179-1-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/clk/qcom/clk-regmap-mux.c | 2 +-
drivers/clk/qcom/common.c | 12 ++++++++++++
drivers/clk/qcom/common.h | 2 ++
3 files changed, 15 insertions(+), 1 deletion(-)
--- a/drivers/clk/qcom/clk-regmap-mux.c
+++ b/drivers/clk/qcom/clk-regmap-mux.c
@@ -28,7 +28,7 @@ static u8 mux_get_parent(struct clk_hw *
val &= mask;
if (mux->parent_map)
- return qcom_find_src_index(hw, mux->parent_map, val);
+ return qcom_find_cfg_index(hw, mux->parent_map, val);
return val;
}
--- a/drivers/clk/qcom/common.c
+++ b/drivers/clk/qcom/common.c
@@ -69,6 +69,18 @@ int qcom_find_src_index(struct clk_hw *h
}
EXPORT_SYMBOL_GPL(qcom_find_src_index);
+int qcom_find_cfg_index(struct clk_hw *hw, const struct parent_map *map, u8 cfg)
+{
+ int i, num_parents = clk_hw_get_num_parents(hw);
+
+ for (i = 0; i < num_parents; i++)
+ if (cfg == map[i].cfg)
+ return i;
+
+ return -ENOENT;
+}
+EXPORT_SYMBOL_GPL(qcom_find_cfg_index);
+
struct regmap *
qcom_cc_map(struct platform_device *pdev, const struct qcom_cc_desc *desc)
{
--- a/drivers/clk/qcom/common.h
+++ b/drivers/clk/qcom/common.h
@@ -49,6 +49,8 @@ extern void
qcom_pll_set_fsm_mode(struct regmap *m, u32 reg, u8 bias_count, u8 lock_count);
extern int qcom_find_src_index(struct clk_hw *hw, const struct parent_map *map,
u8 src);
+extern int qcom_find_cfg_index(struct clk_hw *hw, const struct parent_map *map,
+ u8 cfg);
extern int qcom_cc_register_board_clk(struct device *dev, const char *path,
const char *name, unsigned long rate);
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 38/88] drm/syncobj: Deal with signalled fences in drm_syncobj_find_fence.
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (36 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 37/88] clk: qcom: regmap-mux: fix parent clock lookup Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 39/88] can: pch_can: pch_can_rx_normal: fix use after free Greg Kroah-Hartman
` (56 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Bas Nieuwenhuizen,
Christian König, Lionel Landwerlin
From: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
commit b19926d4f3a660a8b76e5d989ffd1168e619a5c4 upstream.
dma_fence_chain_find_seqno only ever returns the top fence in the
chain or an unsignalled fence. Hence if we request a seqno that
is already signalled it returns a NULL fence. Some callers are
not prepared to handle this, like the syncobj transfer functions
for example.
This behavior is "new" with timeline syncobj and it looks like
not all callers were updated. To fix this behavior make sure
that a successful drm_sync_find_fence always returns a non-NULL
fence.
v2: Move the fix to drm_syncobj_find_fence from the transfer
functions.
Fixes: ea569910cbab ("drm/syncobj: add transition iotcls between binary and timeline v2")
Cc: stable@vger.kernel.org
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211208023935.17018-1-bas@basnieuwenhuizen.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/drm_syncobj.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/drm_syncobj.c
+++ b/drivers/gpu/drm/drm_syncobj.c
@@ -329,8 +329,17 @@ int drm_syncobj_find_fence(struct drm_fi
if (*fence) {
ret = dma_fence_chain_find_seqno(fence, point);
- if (!ret)
+ if (!ret) {
+ /* If the requested seqno is already signaled
+ * drm_syncobj_find_fence may return a NULL
+ * fence. To make sure the recipient gets
+ * signalled, use a new fence instead.
+ */
+ if (!*fence)
+ *fence = dma_fence_get_stub();
+
goto out;
+ }
dma_fence_put(*fence);
} else {
ret = -EINVAL;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 39/88] can: pch_can: pch_can_rx_normal: fix use after free
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (37 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 38/88] drm/syncobj: Deal with signalled fences in drm_syncobj_find_fence Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 40/88] can: m_can: Disable and ignore ELO interrupt Greg Kroah-Hartman
` (55 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vincent Mailhol, Marc Kleine-Budde
From: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
commit 94cddf1e9227a171b27292509d59691819c458db upstream.
After calling netif_receive_skb(skb), dereferencing skb is unsafe.
Especially, the can_frame cf which aliases skb memory is dereferenced
just after the call netif_receive_skb(skb).
Reordering the lines solves the issue.
Fixes: b21d18b51b31 ("can: Topcliff: Add PCH_CAN driver.")
Link: https://lore.kernel.org/all/20211123111654.621610-1-mailhol.vincent@wanadoo.fr
Cc: stable@vger.kernel.org
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/can/pch_can.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -692,11 +692,11 @@ static int pch_can_rx_normal(struct net_
cf->data[i + 1] = data_reg >> 8;
}
- netif_receive_skb(skb);
rcv_pkts++;
stats->rx_packets++;
quota--;
stats->rx_bytes += cf->can_dlc;
+ netif_receive_skb(skb);
pch_fifo_thresh(priv, obj_num);
obj_num++;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 40/88] can: m_can: Disable and ignore ELO interrupt
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (38 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 39/88] can: pch_can: pch_can_rx_normal: fix use after free Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 41/88] x86/sme: Explicitly map new EFI memmap table as encrypted Greg Kroah-Hartman
` (54 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Brian Silverman, Marc Kleine-Budde
From: Brian Silverman <brian.silverman@bluerivertech.com>
commit f58ac1adc76b5beda43c64ef359056077df4d93a upstream.
With the design of this driver, this condition is often triggered.
However, the counter that this interrupt indicates an overflow is never
read either, so overflowing is harmless.
On my system, when a CAN bus starts flapping up and down, this locks up
the whole system with lots of interrupts and printks.
Specifically, this interrupt indicates the CEL field of ECR has
overflowed. All reads of ECR mask out CEL.
Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support")
Link: https://lore.kernel.org/all/20211129222628.7490-1-brian.silverman@bluerivertech.com
Cc: stable@vger.kernel.org
Signed-off-by: Brian Silverman <brian.silverman@bluerivertech.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/can/m_can/m_can.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -206,15 +206,15 @@ enum m_can_reg {
/* Interrupts for version 3.0.x */
#define IR_ERR_LEC_30X (IR_STE | IR_FOE | IR_ACKE | IR_BE | IR_CRCE)
-#define IR_ERR_BUS_30X (IR_ERR_LEC_30X | IR_WDI | IR_ELO | IR_BEU | \
- IR_BEC | IR_TOO | IR_MRAF | IR_TSW | IR_TEFL | \
- IR_RF1L | IR_RF0L)
+#define IR_ERR_BUS_30X (IR_ERR_LEC_30X | IR_WDI | IR_BEU | IR_BEC | \
+ IR_TOO | IR_MRAF | IR_TSW | IR_TEFL | IR_RF1L | \
+ IR_RF0L)
#define IR_ERR_ALL_30X (IR_ERR_STATE | IR_ERR_BUS_30X)
/* Interrupts for version >= 3.1.x */
#define IR_ERR_LEC_31X (IR_PED | IR_PEA)
-#define IR_ERR_BUS_31X (IR_ERR_LEC_31X | IR_WDI | IR_ELO | IR_BEU | \
- IR_BEC | IR_TOO | IR_MRAF | IR_TSW | IR_TEFL | \
- IR_RF1L | IR_RF0L)
+#define IR_ERR_BUS_31X (IR_ERR_LEC_31X | IR_WDI | IR_BEU | IR_BEC | \
+ IR_TOO | IR_MRAF | IR_TSW | IR_TEFL | IR_RF1L | \
+ IR_RF0L)
#define IR_ERR_ALL_31X (IR_ERR_STATE | IR_ERR_BUS_31X)
/* Interrupt Line Select (ILS) */
@@ -751,8 +751,6 @@ static void m_can_handle_other_err(struc
{
if (irqstatus & IR_WDI)
netdev_err(dev, "Message RAM Watchdog event due to missing READY\n");
- if (irqstatus & IR_ELO)
- netdev_err(dev, "Error Logging Overflow\n");
if (irqstatus & IR_BEU)
netdev_err(dev, "Bit Error Uncorrected\n");
if (irqstatus & IR_BEC)
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 41/88] x86/sme: Explicitly map new EFI memmap table as encrypted
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (39 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 40/88] can: m_can: Disable and ignore ELO interrupt Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 42/88] libata: add horkage for ASMedia 1092 Greg Kroah-Hartman
` (53 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Tom Lendacky, Ard Biesheuvel
From: Tom Lendacky <thomas.lendacky@amd.com>
commit 1ff2fc02862d52e18fd3daabcfe840ec27e920a8 upstream.
Reserving memory using efi_mem_reserve() calls into the x86
efi_arch_mem_reserve() function. This function will insert a new EFI
memory descriptor into the EFI memory map representing the area of
memory to be reserved and marking it as EFI runtime memory. As part
of adding this new entry, a new EFI memory map is allocated and mapped.
The mapping is where a problem can occur. This new memory map is mapped
using early_memremap() and generally mapped encrypted, unless the new
memory for the mapping happens to come from an area of memory that is
marked as EFI_BOOT_SERVICES_DATA memory. In this case, the new memory will
be mapped unencrypted. However, during replacement of the old memory map,
efi_mem_type() is disabled, so the new memory map will now be long-term
mapped encrypted (in efi.memmap), resulting in the map containing invalid
data and causing the kernel boot to crash.
Since it is known that the area will be mapped encrypted going forward,
explicitly map the new memory map as encrypted using early_memremap_prot().
Cc: <stable@vger.kernel.org> # 4.14.x
Fixes: 8f716c9b5feb ("x86/mm: Add support to access boot related data in the clear")
Link: https://lore.kernel.org/all/ebf1eb2940405438a09d51d121ec0d02c8755558.1634752931.git.thomas.lendacky@amd.com/
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ardb: incorporate Kconfig fix by Arnd]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/Kconfig | 1 +
arch/x86/platform/efi/quirks.c | 3 ++-
2 files changed, 3 insertions(+), 1 deletion(-)
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1990,6 +1990,7 @@ config EFI
depends on ACPI
select UCS2_STRING
select EFI_RUNTIME_WRAPPERS
+ select ARCH_USE_MEMREMAP_PROT
---help---
This enables the kernel to use EFI runtime services that are
available (such as the EFI variable services).
--- a/arch/x86/platform/efi/quirks.c
+++ b/arch/x86/platform/efi/quirks.c
@@ -279,7 +279,8 @@ void __init efi_arch_mem_reserve(phys_ad
return;
}
- new = early_memremap(new_phys, new_size);
+ new = early_memremap_prot(new_phys, new_size,
+ pgprot_val(pgprot_encrypted(FIXMAP_PAGE_NORMAL)));
if (!new) {
pr_err("Failed to map new boot services memmap\n");
return;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 42/88] libata: add horkage for ASMedia 1092
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (40 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 41/88] x86/sme: Explicitly map new EFI memmap table as encrypted Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 43/88] wait: add wake_up_pollfree() Greg Kroah-Hartman
` (52 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Hannes Reinecke, Damien Le Moal
From: Hannes Reinecke <hare@suse.de>
commit a66307d473077b7aeba74e9b09c841ab3d399c2d upstream.
The ASMedia 1092 has a configuration mode which will present a
dummy device; sadly the implementation falsely claims to provide
a device with 100M which doesn't actually exist.
So disable this device to avoid errors during boot.
Cc: stable@vger.kernel.org
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/ata/libata-core.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4437,6 +4437,8 @@ static const struct ata_blacklist_entry
{ "VRFDFC22048UCHC-TE*", NULL, ATA_HORKAGE_NODMA },
/* Odd clown on sil3726/4726 PMPs */
{ "Config Disk", NULL, ATA_HORKAGE_DISABLE },
+ /* Similar story with ASMedia 1092 */
+ { "ASMT109x- Config", NULL, ATA_HORKAGE_DISABLE },
/* Weird ATAPI devices */
{ "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 },
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 43/88] wait: add wake_up_pollfree()
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (41 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 42/88] libata: add horkage for ASMedia 1092 Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 44/88] binder: use wake_up_pollfree() Greg Kroah-Hartman
` (51 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, linux-kernel@vger.kernel.org, Linus Torvalds,
Eric Biggers, Linus Torvalds
From: Eric Biggers <ebiggers@google.com>
commit 42288cb44c4b5fff7653bc392b583a2b8bd6a8c0 upstream.
Several ->poll() implementations are special in that they use a
waitqueue whose lifetime is the current task, rather than the struct
file as is normally the case. This is okay for blocking polls, since a
blocking poll occurs within one task; however, non-blocking polls
require another solution. This solution is for the queue to be cleared
before it is freed, using 'wake_up_poll(wq, EPOLLHUP | POLLFREE);'.
However, that has a bug: wake_up_poll() calls __wake_up() with
nr_exclusive=1. Therefore, if there are multiple "exclusive" waiters,
and the wakeup function for the first one returns a positive value, only
that one will be called. That's *not* what's needed for POLLFREE;
POLLFREE is special in that it really needs to wake up everyone.
Considering the three non-blocking poll systems:
- io_uring poll doesn't handle POLLFREE at all, so it is broken anyway.
- aio poll is unaffected, since it doesn't support exclusive waits.
However, that's fragile, as someone could add this feature later.
- epoll doesn't appear to be broken by this, since its wakeup function
returns 0 when it sees POLLFREE. But this is fragile.
Although there is a workaround (see epoll), it's better to define a
function which always sends POLLFREE to all waiters. Add such a
function. Also make it verify that the queue really becomes empty after
all waiters have been woken up.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211209010455.42744-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/wait.h | 26 ++++++++++++++++++++++++++
kernel/sched/wait.c | 7 +++++++
2 files changed, 33 insertions(+)
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -204,6 +204,7 @@ void __wake_up_locked_key_bookmark(struc
void __wake_up_sync_key(struct wait_queue_head *wq_head, unsigned int mode, int nr, void *key);
void __wake_up_locked(struct wait_queue_head *wq_head, unsigned int mode, int nr);
void __wake_up_sync(struct wait_queue_head *wq_head, unsigned int mode, int nr);
+void __wake_up_pollfree(struct wait_queue_head *wq_head);
#define wake_up(x) __wake_up(x, TASK_NORMAL, 1, NULL)
#define wake_up_nr(x, nr) __wake_up(x, TASK_NORMAL, nr, NULL)
@@ -230,6 +231,31 @@ void __wake_up_sync(struct wait_queue_he
#define wake_up_interruptible_sync_poll(x, m) \
__wake_up_sync_key((x), TASK_INTERRUPTIBLE, 1, poll_to_key(m))
+/**
+ * wake_up_pollfree - signal that a polled waitqueue is going away
+ * @wq_head: the wait queue head
+ *
+ * In the very rare cases where a ->poll() implementation uses a waitqueue whose
+ * lifetime is tied to a task rather than to the 'struct file' being polled,
+ * this function must be called before the waitqueue is freed so that
+ * non-blocking polls (e.g. epoll) are notified that the queue is going away.
+ *
+ * The caller must also RCU-delay the freeing of the wait_queue_head, e.g. via
+ * an explicit synchronize_rcu() or call_rcu(), or via SLAB_TYPESAFE_BY_RCU.
+ */
+static inline void wake_up_pollfree(struct wait_queue_head *wq_head)
+{
+ /*
+ * For performance reasons, we don't always take the queue lock here.
+ * Therefore, we might race with someone removing the last entry from
+ * the queue, and proceed while they still hold the queue lock.
+ * However, rcu_read_lock() is required to be held in such cases, so we
+ * can safely proceed with an RCU-delayed free.
+ */
+ if (waitqueue_active(wq_head))
+ __wake_up_pollfree(wq_head);
+}
+
#define ___wait_cond_timeout(condition) \
({ \
bool __cond = (condition); \
--- a/kernel/sched/wait.c
+++ b/kernel/sched/wait.c
@@ -206,6 +206,13 @@ void __wake_up_sync(struct wait_queue_he
}
EXPORT_SYMBOL_GPL(__wake_up_sync); /* For internal use only */
+void __wake_up_pollfree(struct wait_queue_head *wq_head)
+{
+ __wake_up(wq_head, TASK_NORMAL, 0, poll_to_key(EPOLLHUP | POLLFREE));
+ /* POLLFREE must have cleared the queue. */
+ WARN_ON_ONCE(waitqueue_active(wq_head));
+}
+
/*
* Note: we use "set_current_state()" _after_ the wait-queue add,
* because we need a memory barrier there on SMP, so that any
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 44/88] binder: use wake_up_pollfree()
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (42 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 43/88] wait: add wake_up_pollfree() Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 45/88] signalfd: " Greg Kroah-Hartman
` (50 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, linux-kernel@vger.kernel.org, Linus Torvalds,
Eric Biggers, Linus Torvalds
From: Eric Biggers <ebiggers@google.com>
commit a880b28a71e39013e357fd3adccd1d8a31bc69a8 upstream.
wake_up_poll() uses nr_exclusive=1, so it's not guaranteed to wake up
all exclusive waiters. Yet, POLLFREE *must* wake up all waiters. epoll
and aio poll are fortunately not affected by this, but it's very
fragile. Thus, the new function wake_up_pollfree() has been introduced.
Convert binder to use wake_up_pollfree().
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: f5cb779ba163 ("ANDROID: binder: remove waitqueue when thread exits.")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211209010455.42744-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/android/binder.c | 21 +++++++++------------
1 file changed, 9 insertions(+), 12 deletions(-)
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -4788,23 +4788,20 @@ static int binder_thread_release(struct
__release(&t->lock);
/*
- * If this thread used poll, make sure we remove the waitqueue
- * from any epoll data structures holding it with POLLFREE.
- * waitqueue_active() is safe to use here because we're holding
- * the inner lock.
+ * If this thread used poll, make sure we remove the waitqueue from any
+ * poll data structures holding it.
*/
- if ((thread->looper & BINDER_LOOPER_STATE_POLL) &&
- waitqueue_active(&thread->wait)) {
- wake_up_poll(&thread->wait, EPOLLHUP | POLLFREE);
- }
+ if (thread->looper & BINDER_LOOPER_STATE_POLL)
+ wake_up_pollfree(&thread->wait);
binder_inner_proc_unlock(thread->proc);
/*
- * This is needed to avoid races between wake_up_poll() above and
- * and ep_remove_waitqueue() called for other reasons (eg the epoll file
- * descriptor being closed); ep_remove_waitqueue() holds an RCU read
- * lock, so we can be sure it's done after calling synchronize_rcu().
+ * This is needed to avoid races between wake_up_pollfree() above and
+ * someone else removing the last entry from the queue for other reasons
+ * (e.g. ep_remove_wait_queue() being called due to an epoll file
+ * descriptor being closed). Such other users hold an RCU read lock, so
+ * we can be sure they're done after we call synchronize_rcu().
*/
if (thread->looper & BINDER_LOOPER_STATE_POLL)
synchronize_rcu();
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 45/88] signalfd: use wake_up_pollfree()
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (43 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 44/88] binder: use wake_up_pollfree() Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 46/88] aio: keep poll requests on waitqueue until completed Greg Kroah-Hartman
` (49 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, linux-kernel@vger.kernel.org, Linus Torvalds,
Eric Biggers, Linus Torvalds
From: Eric Biggers <ebiggers@google.com>
commit 9537bae0da1f8d1e2361ab6d0479e8af7824e160 upstream.
wake_up_poll() uses nr_exclusive=1, so it's not guaranteed to wake up
all exclusive waiters. Yet, POLLFREE *must* wake up all waiters. epoll
and aio poll are fortunately not affected by this, but it's very
fragile. Thus, the new function wake_up_pollfree() has been introduced.
Convert signalfd to use wake_up_pollfree().
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: d80e731ecab4 ("epoll: introduce POLLFREE to flush ->signalfd_wqh before kfree()")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211209010455.42744-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/signalfd.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -35,17 +35,7 @@
void signalfd_cleanup(struct sighand_struct *sighand)
{
- wait_queue_head_t *wqh = &sighand->signalfd_wqh;
- /*
- * The lockless check can race with remove_wait_queue() in progress,
- * but in this case its caller should run under rcu_read_lock() and
- * sighand_cachep is SLAB_TYPESAFE_BY_RCU, we can safely return.
- */
- if (likely(!waitqueue_active(wqh)))
- return;
-
- /* wait_queue_entry_t->func(POLLFREE) should do remove_wait_queue() */
- wake_up_poll(wqh, EPOLLHUP | POLLFREE);
+ wake_up_pollfree(&sighand->signalfd_wqh);
}
struct signalfd_ctx {
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 46/88] aio: keep poll requests on waitqueue until completed
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (44 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 45/88] signalfd: " Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 47/88] aio: fix use-after-free due to missing POLLFREE handling Greg Kroah-Hartman
` (48 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: Greg Kroah-Hartman, Eric Biggers
From: Eric Biggers <ebiggers@google.com>
commit 363bee27e25804d8981dd1c025b4ad49dc39c530 upstream.
Currently, aio_poll_wake() will always remove the poll request from the
waitqueue. Then, if aio_poll_complete_work() sees that none of the
polled events are ready and the request isn't cancelled, it re-adds the
request to the waitqueue. (This can easily happen when polling a file
that doesn't pass an event mask when waking up its waitqueue.)
This is fundamentally broken for two reasons:
1. If a wakeup occurs between vfs_poll() and the request being
re-added to the waitqueue, it will be missed because the request
wasn't on the waitqueue at the time. Therefore, IOCB_CMD_POLL
might never complete even if the polled file is ready.
2. When the request isn't on the waitqueue, there is no way to be
notified that the waitqueue is being freed (which happens when its
lifetime is shorter than the struct file's). This is supposed to
happen via the waitqueue entries being woken up with POLLFREE.
Therefore, leave the requests on the waitqueue until they are actually
completed (or cancelled). To keep track of when aio_poll_complete_work
needs to be scheduled, use new fields in struct poll_iocb. Remove the
'done' field which is now redundant.
Note that this is consistent with how sys_poll() and eventpoll work;
their wakeup functions do *not* remove the waitqueue entries.
Fixes: 2c14fa838cbe ("aio: implement IOCB_CMD_POLL")
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://lore.kernel.org/r/20211209010455.42744-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/aio.c | 83 +++++++++++++++++++++++++++++++++++++++++++++++----------------
1 file changed, 63 insertions(+), 20 deletions(-)
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -183,8 +183,9 @@ struct poll_iocb {
struct file *file;
struct wait_queue_head *head;
__poll_t events;
- bool done;
bool cancelled;
+ bool work_scheduled;
+ bool work_need_resched;
struct wait_queue_entry wait;
struct work_struct work;
};
@@ -1645,14 +1646,26 @@ static void aio_poll_complete_work(struc
* avoid further branches in the fast path.
*/
spin_lock_irq(&ctx->ctx_lock);
+ spin_lock(&req->head->lock);
if (!mask && !READ_ONCE(req->cancelled)) {
- add_wait_queue(req->head, &req->wait);
+ /*
+ * The request isn't actually ready to be completed yet.
+ * Reschedule completion if another wakeup came in.
+ */
+ if (req->work_need_resched) {
+ schedule_work(&req->work);
+ req->work_need_resched = false;
+ } else {
+ req->work_scheduled = false;
+ }
+ spin_unlock(&req->head->lock);
spin_unlock_irq(&ctx->ctx_lock);
return;
}
+ list_del_init(&req->wait.entry);
+ spin_unlock(&req->head->lock);
list_del_init(&iocb->ki_list);
iocb->ki_res.res = mangle_poll(mask);
- req->done = true;
spin_unlock_irq(&ctx->ctx_lock);
iocb_put(iocb);
@@ -1666,9 +1679,9 @@ static int aio_poll_cancel(struct kiocb
spin_lock(&req->head->lock);
WRITE_ONCE(req->cancelled, true);
- if (!list_empty(&req->wait.entry)) {
- list_del_init(&req->wait.entry);
+ if (!req->work_scheduled) {
schedule_work(&aiocb->poll.work);
+ req->work_scheduled = true;
}
spin_unlock(&req->head->lock);
@@ -1687,20 +1700,26 @@ static int aio_poll_wake(struct wait_que
if (mask && !(mask & req->events))
return 0;
- list_del_init(&req->wait.entry);
-
- if (mask && spin_trylock_irqsave(&iocb->ki_ctx->ctx_lock, flags)) {
+ /*
+ * Complete the request inline if possible. This requires that three
+ * conditions be met:
+ * 1. An event mask must have been passed. If a plain wakeup was done
+ * instead, then mask == 0 and we have to call vfs_poll() to get
+ * the events, so inline completion isn't possible.
+ * 2. The completion work must not have already been scheduled.
+ * 3. ctx_lock must not be busy. We have to use trylock because we
+ * already hold the waitqueue lock, so this inverts the normal
+ * locking order. Use irqsave/irqrestore because not all
+ * filesystems (e.g. fuse) call this function with IRQs disabled,
+ * yet IRQs have to be disabled before ctx_lock is obtained.
+ */
+ if (mask && !req->work_scheduled &&
+ spin_trylock_irqsave(&iocb->ki_ctx->ctx_lock, flags)) {
struct kioctx *ctx = iocb->ki_ctx;
- /*
- * Try to complete the iocb inline if we can. Use
- * irqsave/irqrestore because not all filesystems (e.g. fuse)
- * call this function with IRQs disabled and because IRQs
- * have to be disabled before ctx_lock is obtained.
- */
+ list_del_init(&req->wait.entry);
list_del(&iocb->ki_list);
iocb->ki_res.res = mangle_poll(mask);
- req->done = true;
if (iocb->ki_eventfd && eventfd_signal_count()) {
iocb = NULL;
INIT_WORK(&req->work, aio_poll_put_work);
@@ -1710,7 +1729,20 @@ static int aio_poll_wake(struct wait_que
if (iocb)
iocb_put(iocb);
} else {
- schedule_work(&req->work);
+ /*
+ * Schedule the completion work if needed. If it was already
+ * scheduled, record that another wakeup came in.
+ *
+ * Don't remove the request from the waitqueue here, as it might
+ * not actually be complete yet (we won't know until vfs_poll()
+ * is called), and we must not miss any wakeups.
+ */
+ if (req->work_scheduled) {
+ req->work_need_resched = true;
+ } else {
+ schedule_work(&req->work);
+ req->work_scheduled = true;
+ }
}
return 1;
}
@@ -1757,8 +1789,9 @@ static int aio_poll(struct aio_kiocb *ai
req->events = demangle_poll(iocb->aio_buf) | EPOLLERR | EPOLLHUP;
req->head = NULL;
- req->done = false;
req->cancelled = false;
+ req->work_scheduled = false;
+ req->work_need_resched = false;
apt.pt._qproc = aio_poll_queue_proc;
apt.pt._key = req->events;
@@ -1773,17 +1806,27 @@ static int aio_poll(struct aio_kiocb *ai
spin_lock_irq(&ctx->ctx_lock);
if (likely(req->head)) {
spin_lock(&req->head->lock);
- if (unlikely(list_empty(&req->wait.entry))) {
- if (apt.error)
+ if (list_empty(&req->wait.entry) || req->work_scheduled) {
+ /*
+ * aio_poll_wake() already either scheduled the async
+ * completion work, or completed the request inline.
+ */
+ if (apt.error) /* unsupported case: multiple queues */
cancel = true;
apt.error = 0;
mask = 0;
}
if (mask || apt.error) {
+ /* Steal to complete synchronously. */
list_del_init(&req->wait.entry);
} else if (cancel) {
+ /* Cancel if possible (may be too late though). */
WRITE_ONCE(req->cancelled, true);
- } else if (!req->done) { /* actually waiting for an event */
+ } else if (!list_empty(&req->wait.entry)) {
+ /*
+ * Actually waiting for an event, so add the request to
+ * active_reqs so that it can be cancelled if needed.
+ */
list_add_tail(&aiocb->ki_list, &ctx->active_reqs);
aiocb->ki_cancel = aio_poll_cancel;
}
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 47/88] aio: fix use-after-free due to missing POLLFREE handling
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (45 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 46/88] aio: keep poll requests on waitqueue until completed Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 48/88] tracefs: Set all files to the same group ownership as the mount option Greg Kroah-Hartman
` (47 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: Greg Kroah-Hartman, Eric Biggers
From: Eric Biggers <ebiggers@google.com>
commit 50252e4b5e989ce64555c7aef7516bdefc2fea72 upstream.
signalfd_poll() and binder_poll() are special in that they use a
waitqueue whose lifetime is the current task, rather than the struct
file as is normally the case. This is okay for blocking polls, since a
blocking poll occurs within one task; however, non-blocking polls
require another solution. This solution is for the queue to be cleared
before it is freed, by sending a POLLFREE notification to all waiters.
Unfortunately, only eventpoll handles POLLFREE. A second type of
non-blocking poll, aio poll, was added in kernel v4.18, and it doesn't
handle POLLFREE. This allows a use-after-free to occur if a signalfd or
binder fd is polled with aio poll, and the waitqueue gets freed.
Fix this by making aio poll handle POLLFREE.
A patch by Ramji Jiyani <ramjiyani@google.com>
(https://lore.kernel.org/r/20211027011834.2497484-1-ramjiyani@google.com)
tried to do this by making aio_poll_wake() always complete the request
inline if POLLFREE is seen. However, that solution had two bugs.
First, it introduced a deadlock, as it unconditionally locked the aio
context while holding the waitqueue lock, which inverts the normal
locking order. Second, it didn't consider that POLLFREE notifications
are missed while the request has been temporarily de-queued.
The second problem was solved by my previous patch. This patch then
properly fixes the use-after-free by handling POLLFREE in a
deadlock-free way. It does this by taking advantage of the fact that
freeing of the waitqueue is RCU-delayed, similar to what eventpoll does.
Fixes: 2c14fa838cbe ("aio: implement IOCB_CMD_POLL")
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://lore.kernel.org/r/20211209010455.42744-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/aio.c | 137 ++++++++++++++++++++++++++++++----------
include/uapi/asm-generic/poll.h | 2
2 files changed, 107 insertions(+), 32 deletions(-)
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -1627,6 +1627,51 @@ static void aio_poll_put_work(struct wor
iocb_put(iocb);
}
+/*
+ * Safely lock the waitqueue which the request is on, synchronizing with the
+ * case where the ->poll() provider decides to free its waitqueue early.
+ *
+ * Returns true on success, meaning that req->head->lock was locked, req->wait
+ * is on req->head, and an RCU read lock was taken. Returns false if the
+ * request was already removed from its waitqueue (which might no longer exist).
+ */
+static bool poll_iocb_lock_wq(struct poll_iocb *req)
+{
+ wait_queue_head_t *head;
+
+ /*
+ * While we hold the waitqueue lock and the waitqueue is nonempty,
+ * wake_up_pollfree() will wait for us. However, taking the waitqueue
+ * lock in the first place can race with the waitqueue being freed.
+ *
+ * We solve this as eventpoll does: by taking advantage of the fact that
+ * all users of wake_up_pollfree() will RCU-delay the actual free. If
+ * we enter rcu_read_lock() and see that the pointer to the queue is
+ * non-NULL, we can then lock it without the memory being freed out from
+ * under us, then check whether the request is still on the queue.
+ *
+ * Keep holding rcu_read_lock() as long as we hold the queue lock, in
+ * case the caller deletes the entry from the queue, leaving it empty.
+ * In that case, only RCU prevents the queue memory from being freed.
+ */
+ rcu_read_lock();
+ head = smp_load_acquire(&req->head);
+ if (head) {
+ spin_lock(&head->lock);
+ if (!list_empty(&req->wait.entry))
+ return true;
+ spin_unlock(&head->lock);
+ }
+ rcu_read_unlock();
+ return false;
+}
+
+static void poll_iocb_unlock_wq(struct poll_iocb *req)
+{
+ spin_unlock(&req->head->lock);
+ rcu_read_unlock();
+}
+
static void aio_poll_complete_work(struct work_struct *work)
{
struct poll_iocb *req = container_of(work, struct poll_iocb, work);
@@ -1646,24 +1691,25 @@ static void aio_poll_complete_work(struc
* avoid further branches in the fast path.
*/
spin_lock_irq(&ctx->ctx_lock);
- spin_lock(&req->head->lock);
- if (!mask && !READ_ONCE(req->cancelled)) {
- /*
- * The request isn't actually ready to be completed yet.
- * Reschedule completion if another wakeup came in.
- */
- if (req->work_need_resched) {
- schedule_work(&req->work);
- req->work_need_resched = false;
- } else {
- req->work_scheduled = false;
+ if (poll_iocb_lock_wq(req)) {
+ if (!mask && !READ_ONCE(req->cancelled)) {
+ /*
+ * The request isn't actually ready to be completed yet.
+ * Reschedule completion if another wakeup came in.
+ */
+ if (req->work_need_resched) {
+ schedule_work(&req->work);
+ req->work_need_resched = false;
+ } else {
+ req->work_scheduled = false;
+ }
+ poll_iocb_unlock_wq(req);
+ spin_unlock_irq(&ctx->ctx_lock);
+ return;
}
- spin_unlock(&req->head->lock);
- spin_unlock_irq(&ctx->ctx_lock);
- return;
- }
- list_del_init(&req->wait.entry);
- spin_unlock(&req->head->lock);
+ list_del_init(&req->wait.entry);
+ poll_iocb_unlock_wq(req);
+ } /* else, POLLFREE has freed the waitqueue, so we must complete */
list_del_init(&iocb->ki_list);
iocb->ki_res.res = mangle_poll(mask);
spin_unlock_irq(&ctx->ctx_lock);
@@ -1677,13 +1723,14 @@ static int aio_poll_cancel(struct kiocb
struct aio_kiocb *aiocb = container_of(iocb, struct aio_kiocb, rw);
struct poll_iocb *req = &aiocb->poll;
- spin_lock(&req->head->lock);
- WRITE_ONCE(req->cancelled, true);
- if (!req->work_scheduled) {
- schedule_work(&aiocb->poll.work);
- req->work_scheduled = true;
- }
- spin_unlock(&req->head->lock);
+ if (poll_iocb_lock_wq(req)) {
+ WRITE_ONCE(req->cancelled, true);
+ if (!req->work_scheduled) {
+ schedule_work(&aiocb->poll.work);
+ req->work_scheduled = true;
+ }
+ poll_iocb_unlock_wq(req);
+ } /* else, the request was force-cancelled by POLLFREE already */
return 0;
}
@@ -1735,7 +1782,8 @@ static int aio_poll_wake(struct wait_que
*
* Don't remove the request from the waitqueue here, as it might
* not actually be complete yet (we won't know until vfs_poll()
- * is called), and we must not miss any wakeups.
+ * is called), and we must not miss any wakeups. POLLFREE is an
+ * exception to this; see below.
*/
if (req->work_scheduled) {
req->work_need_resched = true;
@@ -1743,6 +1791,28 @@ static int aio_poll_wake(struct wait_que
schedule_work(&req->work);
req->work_scheduled = true;
}
+
+ /*
+ * If the waitqueue is being freed early but we can't complete
+ * the request inline, we have to tear down the request as best
+ * we can. That means immediately removing the request from its
+ * waitqueue and preventing all further accesses to the
+ * waitqueue via the request. We also need to schedule the
+ * completion work (done above). Also mark the request as
+ * cancelled, to potentially skip an unneeded call to ->poll().
+ */
+ if (mask & POLLFREE) {
+ WRITE_ONCE(req->cancelled, true);
+ list_del_init(&req->wait.entry);
+
+ /*
+ * Careful: this *must* be the last step, since as soon
+ * as req->head is NULL'ed out, the request can be
+ * completed and freed, since aio_poll_complete_work()
+ * will no longer need to take the waitqueue lock.
+ */
+ smp_store_release(&req->head, NULL);
+ }
}
return 1;
}
@@ -1750,6 +1820,7 @@ static int aio_poll_wake(struct wait_que
struct aio_poll_table {
struct poll_table_struct pt;
struct aio_kiocb *iocb;
+ bool queued;
int error;
};
@@ -1760,11 +1831,12 @@ aio_poll_queue_proc(struct file *file, s
struct aio_poll_table *pt = container_of(p, struct aio_poll_table, pt);
/* multiple wait queues per file are not supported */
- if (unlikely(pt->iocb->poll.head)) {
+ if (unlikely(pt->queued)) {
pt->error = -EINVAL;
return;
}
+ pt->queued = true;
pt->error = 0;
pt->iocb->poll.head = head;
add_wait_queue(head, &pt->iocb->poll.wait);
@@ -1796,6 +1868,7 @@ static int aio_poll(struct aio_kiocb *ai
apt.pt._qproc = aio_poll_queue_proc;
apt.pt._key = req->events;
apt.iocb = aiocb;
+ apt.queued = false;
apt.error = -EINVAL; /* same as no support for IOCB_CMD_POLL */
/* initialized the list so that we can do list_empty checks */
@@ -1804,9 +1877,10 @@ static int aio_poll(struct aio_kiocb *ai
mask = vfs_poll(req->file, &apt.pt) & req->events;
spin_lock_irq(&ctx->ctx_lock);
- if (likely(req->head)) {
- spin_lock(&req->head->lock);
- if (list_empty(&req->wait.entry) || req->work_scheduled) {
+ if (likely(apt.queued)) {
+ bool on_queue = poll_iocb_lock_wq(req);
+
+ if (!on_queue || req->work_scheduled) {
/*
* aio_poll_wake() already either scheduled the async
* completion work, or completed the request inline.
@@ -1822,7 +1896,7 @@ static int aio_poll(struct aio_kiocb *ai
} else if (cancel) {
/* Cancel if possible (may be too late though). */
WRITE_ONCE(req->cancelled, true);
- } else if (!list_empty(&req->wait.entry)) {
+ } else if (on_queue) {
/*
* Actually waiting for an event, so add the request to
* active_reqs so that it can be cancelled if needed.
@@ -1830,7 +1904,8 @@ static int aio_poll(struct aio_kiocb *ai
list_add_tail(&aiocb->ki_list, &ctx->active_reqs);
aiocb->ki_cancel = aio_poll_cancel;
}
- spin_unlock(&req->head->lock);
+ if (on_queue)
+ poll_iocb_unlock_wq(req);
}
if (mask) { /* no async, we'd stolen it */
aiocb->ki_res.res = mangle_poll(mask);
--- a/include/uapi/asm-generic/poll.h
+++ b/include/uapi/asm-generic/poll.h
@@ -29,7 +29,7 @@
#define POLLRDHUP 0x2000
#endif
-#define POLLFREE (__force __poll_t)0x4000 /* currently only for epoll */
+#define POLLFREE (__force __poll_t)0x4000
#define POLL_BUSY_LOOP (__force __poll_t)0x8000
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 48/88] tracefs: Set all files to the same group ownership as the mount option
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (46 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 47/88] aio: fix use-after-free due to missing POLLFREE handling Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 49/88] block: fix ioprio_get(IOPRIO_WHO_PGRP) vs setuid(2) Greg Kroah-Hartman
` (46 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ingo Molnar, Kees Cook,
Andrew Morton, Linus Torvalds, linux-fsdevel, Al Viro,
Kalesh Singh, Yabin Cui, Steven Rostedt (VMware)
From: Steven Rostedt (VMware) <rostedt@goodmis.org>
commit 48b27b6b5191e2e1f2798cd80877b6e4ef47c351 upstream.
As people have been asking to allow non-root processes to have access to
the tracefs directory, it was considered best to only allow groups to have
access to the directory, where it is easier to just set the tracefs file
system to a specific group (as other would be too dangerous), and that way
the admins could pick which processes would have access to tracefs.
Unfortunately, this broke tooling on Android that expected the other bit
to be set. For some special cases, for non-root tools to trace the system,
tracefs would be mounted and change the permissions of the top level
directory which gave access to all running tasks permission to the
tracing directory. Even though this would be dangerous to do in a
production environment, for testing environments this can be useful.
Now with the new changes to not allow other (which is still the proper
thing to do), it breaks the testing tooling. Now more code needs to be
loaded on the system to change ownership of the tracing directory.
The real solution is to have tracefs honor the gid=xxx option when
mounting. That is,
(tracing group tracing has value 1003)
mount -t tracefs -o gid=1003 tracefs /sys/kernel/tracing
should have it that all files in the tracing directory should be of the
given group.
Copy the logic from d_walk() from dcache.c and simplify it for the mount
case of tracefs if gid is set. All the files in tracefs will be walked and
their group will be set to the value passed in.
Link: https://lkml.kernel.org/r/20211207171729.2a54e1b3@gandalf.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Kalesh Singh <kaleshsingh@google.com>
Reported-by: Yabin Cui <yabinc@google.com>
Fixes: 49d67e445742 ("tracefs: Have tracefs directories not set OTH permission bits by default")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/tracefs/inode.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 72 insertions(+)
--- a/fs/tracefs/inode.c
+++ b/fs/tracefs/inode.c
@@ -159,6 +159,77 @@ struct tracefs_fs_info {
struct tracefs_mount_opts mount_opts;
};
+static void change_gid(struct dentry *dentry, kgid_t gid)
+{
+ if (!dentry->d_inode)
+ return;
+ dentry->d_inode->i_gid = gid;
+}
+
+/*
+ * Taken from d_walk, but without he need for handling renames.
+ * Nothing can be renamed while walking the list, as tracefs
+ * does not support renames. This is only called when mounting
+ * or remounting the file system, to set all the files to
+ * the given gid.
+ */
+static void set_gid(struct dentry *parent, kgid_t gid)
+{
+ struct dentry *this_parent;
+ struct list_head *next;
+
+ this_parent = parent;
+ spin_lock(&this_parent->d_lock);
+
+ change_gid(this_parent, gid);
+repeat:
+ next = this_parent->d_subdirs.next;
+resume:
+ while (next != &this_parent->d_subdirs) {
+ struct list_head *tmp = next;
+ struct dentry *dentry = list_entry(tmp, struct dentry, d_child);
+ next = tmp->next;
+
+ spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED);
+
+ change_gid(dentry, gid);
+
+ if (!list_empty(&dentry->d_subdirs)) {
+ spin_unlock(&this_parent->d_lock);
+ spin_release(&dentry->d_lock.dep_map, 1, _RET_IP_);
+ this_parent = dentry;
+ spin_acquire(&this_parent->d_lock.dep_map, 0, 1, _RET_IP_);
+ goto repeat;
+ }
+ spin_unlock(&dentry->d_lock);
+ }
+ /*
+ * All done at this level ... ascend and resume the search.
+ */
+ rcu_read_lock();
+ascend:
+ if (this_parent != parent) {
+ struct dentry *child = this_parent;
+ this_parent = child->d_parent;
+
+ spin_unlock(&child->d_lock);
+ spin_lock(&this_parent->d_lock);
+
+ /* go into the first sibling still alive */
+ do {
+ next = child->d_child.next;
+ if (next == &this_parent->d_subdirs)
+ goto ascend;
+ child = list_entry(next, struct dentry, d_child);
+ } while (unlikely(child->d_flags & DCACHE_DENTRY_KILLED));
+ rcu_read_unlock();
+ goto resume;
+ }
+ rcu_read_unlock();
+ spin_unlock(&this_parent->d_lock);
+ return;
+}
+
static int tracefs_parse_options(char *data, struct tracefs_mount_opts *opts)
{
substring_t args[MAX_OPT_ARGS];
@@ -191,6 +262,7 @@ static int tracefs_parse_options(char *d
if (!gid_valid(gid))
return -EINVAL;
opts->gid = gid;
+ set_gid(tracefs_mount->mnt_root, gid);
break;
case Opt_mode:
if (match_octal(&args[0], &option))
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 49/88] block: fix ioprio_get(IOPRIO_WHO_PGRP) vs setuid(2)
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (47 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 48/88] tracefs: Set all files to the same group ownership as the mount option Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 50/88] qede: validate non LSO skb length Greg Kroah-Hartman
` (45 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oleg Nesterov, Davidlohr Bueso, Jens Axboe
From: Davidlohr Bueso <dave@stgolabs.net>
commit e6a59aac8a8713f335a37d762db0dbe80e7f6d38 upstream.
do_each_pid_thread(PIDTYPE_PGID) can race with a concurrent
change_pid(PIDTYPE_PGID) that can move the task from one hlist
to another while iterating. Serialize ioprio_get to take
the tasklist_lock in this case, just like it's set counterpart.
Fixes: d69b78ba1de (ioprio: grab rcu_read_lock in sys_ioprio_{set,get}())
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Link: https://lore.kernel.org/r/20211210182058.43417-1-dave@stgolabs.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
block/ioprio.c | 3 +++
1 file changed, 3 insertions(+)
--- a/block/ioprio.c
+++ b/block/ioprio.c
@@ -207,6 +207,7 @@ SYSCALL_DEFINE2(ioprio_get, int, which,
pgrp = task_pgrp(current);
else
pgrp = find_vpid(who);
+ read_lock(&tasklist_lock);
do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
tmpio = get_task_ioprio(p);
if (tmpio < 0)
@@ -216,6 +217,8 @@ SYSCALL_DEFINE2(ioprio_get, int, which,
else
ret = ioprio_best(ret, tmpio);
} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
+ read_unlock(&tasklist_lock);
+
break;
case IOPRIO_WHO_USER:
uid = make_kuid(current_user_ns(), who);
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 50/88] qede: validate non LSO skb length
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (48 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 49/88] block: fix ioprio_get(IOPRIO_WHO_PGRP) vs setuid(2) Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 51/88] ASoC: qdsp6: q6routing: Fix return value from msm_routing_put_audio_mixer Greg Kroah-Hartman
` (44 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Manish Chopra, Alok Prasad,
Prabhakar Kushwaha, Ariel Elior, Jakub Kicinski
From: Manish Chopra <manishc@marvell.com>
commit 8e227b198a55859bf790dc7f4b1e30c0859c6756 upstream.
Although it is unlikely that stack could transmit a non LSO
skb with length > MTU, however in some cases or environment such
occurrences actually resulted into firmware asserts due to packet
length being greater than the max supported by the device (~9700B).
This patch adds the safeguard for such odd cases to avoid firmware
asserts.
v2: Added "Fixes" tag with one of the initial driver commit
which enabled the TX traffic actually (as this was probably
day1 issue which was discovered recently by some customer
environment)
Fixes: a2ec6172d29c ("qede: Add support for link")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20211203174413.13090-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/qlogic/qede/qede_fp.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/net/ethernet/qlogic/qede/qede_fp.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_fp.c
@@ -1597,6 +1597,13 @@ netdev_tx_t qede_start_xmit(struct sk_bu
data_split = true;
}
} else {
+ if (unlikely(skb->len > ETH_TX_MAX_NON_LSO_PKT_LEN)) {
+ DP_ERR(edev, "Unexpected non LSO skb length = 0x%x\n", skb->len);
+ qede_free_failed_tx_pkt(txq, first_bd, 0, false);
+ qede_update_tx_producer(txq);
+ return NETDEV_TX_OK;
+ }
+
val |= ((skb->len & ETH_TX_DATA_1ST_BD_PKT_LEN_MASK) <<
ETH_TX_DATA_1ST_BD_PKT_LEN_SHIFT);
}
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 51/88] ASoC: qdsp6: q6routing: Fix return value from msm_routing_put_audio_mixer
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (49 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 50/88] qede: validate non LSO skb length Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 52/88] i40e: Fix failed opcode appearing if handling messages from VF Greg Kroah-Hartman
` (43 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Srinivas Kandagatla, Mark Brown
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
commit 4739d88ad8e1900f809f8a5c98f3c1b65bf76220 upstream.
msm_routing_put_audio_mixer() can return incorrect value in various scenarios.
scenario 1:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 0
return value is 0 instead of 1 eventhough value was changed
scenario 2:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1
return value is 1 instead of 0 eventhough the value was not changed
scenario 3:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 0
return value is 1 instead of 0 eventhough the value was not changed
Fix this by adding checks, so that change notifications are sent correctly.
Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211130163110.5628-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/soc/qcom/qdsp6/q6routing.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/sound/soc/qcom/qdsp6/q6routing.c
+++ b/sound/soc/qcom/qdsp6/q6routing.c
@@ -440,14 +440,16 @@ static int msm_routing_put_audio_mixer(s
struct session_data *session = &data->sessions[session_id];
if (ucontrol->value.integer.value[0]) {
+ if (session->port_id == be_id)
+ return 0;
+
session->port_id = be_id;
snd_soc_dapm_mixer_update_power(dapm, kcontrol, 1, update);
} else {
- if (session->port_id == be_id) {
- session->port_id = -1;
+ if (session->port_id == -1 || session->port_id != be_id)
return 0;
- }
+ session->port_id = -1;
snd_soc_dapm_mixer_update_power(dapm, kcontrol, 0, update);
}
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 52/88] i40e: Fix failed opcode appearing if handling messages from VF
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (50 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 51/88] ASoC: qdsp6: q6routing: Fix return value from msm_routing_put_audio_mixer Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 53/88] i40e: Fix pre-set max number of queues for VF Greg Kroah-Hartman
` (42 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Grzegorz Szczurek, Karen Sornek,
Tony Brelinski, Tony Nguyen
From: Karen Sornek <karen.sornek@intel.com>
commit 61125b8be85dfbc7e9c7fe1cc6c6d631ab603516 upstream.
Fix failed operation code appearing if handling messages from VF.
Implemented by waiting for VF appropriate state if request starts
handle while VF reset.
Without this patch the message handling request while VF is in
a reset state ends with error -5 (I40E_ERR_PARAM).
Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 70 ++++++++++++++-------
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h | 2
2 files changed, 50 insertions(+), 22 deletions(-)
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -1805,6 +1805,32 @@ static int i40e_vc_send_resp_to_vf(struc
}
/**
+ * i40e_sync_vf_state
+ * @vf: pointer to the VF info
+ * @state: VF state
+ *
+ * Called from a VF message to synchronize the service with a potential
+ * VF reset state
+ **/
+static bool i40e_sync_vf_state(struct i40e_vf *vf, enum i40e_vf_states state)
+{
+ int i;
+
+ /* When handling some messages, it needs VF state to be set.
+ * It is possible that this flag is cleared during VF reset,
+ * so there is a need to wait until the end of the reset to
+ * handle the request message correctly.
+ */
+ for (i = 0; i < I40E_VF_STATE_WAIT_COUNT; i++) {
+ if (test_bit(state, &vf->vf_states))
+ return true;
+ usleep_range(10000, 20000);
+ }
+
+ return test_bit(state, &vf->vf_states);
+}
+
+/**
* i40e_vc_get_version_msg
* @vf: pointer to the VF info
* @msg: pointer to the msg buffer
@@ -1864,7 +1890,7 @@ static int i40e_vc_get_vf_resources_msg(
size_t len = 0;
int ret;
- if (!test_bit(I40E_VF_STATE_INIT, &vf->vf_states)) {
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_INIT)) {
aq_ret = I40E_ERR_PARAM;
goto err;
}
@@ -2019,7 +2045,7 @@ static int i40e_vc_config_promiscuous_mo
bool allmulti = false;
bool alluni = false;
- if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE)) {
aq_ret = I40E_ERR_PARAM;
goto err_out;
}
@@ -2107,7 +2133,7 @@ static int i40e_vc_config_queues_msg(str
struct i40e_vsi *vsi;
u16 num_qps_all = 0;
- if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE)) {
aq_ret = I40E_ERR_PARAM;
goto error_param;
}
@@ -2255,7 +2281,7 @@ static int i40e_vc_config_irq_map_msg(st
i40e_status aq_ret = 0;
int i;
- if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE)) {
aq_ret = I40E_ERR_PARAM;
goto error_param;
}
@@ -2427,7 +2453,7 @@ static int i40e_vc_disable_queues_msg(st
struct i40e_pf *pf = vf->pf;
i40e_status aq_ret = 0;
- if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE)) {
aq_ret = I40E_ERR_PARAM;
goto error_param;
}
@@ -2477,7 +2503,7 @@ static int i40e_vc_request_queues_msg(st
u8 cur_pairs = vf->num_queue_pairs;
struct i40e_pf *pf = vf->pf;
- if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states))
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE))
return -EINVAL;
if (req_pairs > I40E_MAX_VF_QUEUES) {
@@ -2523,7 +2549,7 @@ static int i40e_vc_get_stats_msg(struct
memset(&stats, 0, sizeof(struct i40e_eth_stats));
- if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE)) {
aq_ret = I40E_ERR_PARAM;
goto error_param;
}
@@ -2632,7 +2658,7 @@ static int i40e_vc_add_mac_addr_msg(stru
i40e_status ret = 0;
int i;
- if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states) ||
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE) ||
!i40e_vc_isvalid_vsi_id(vf, al->vsi_id)) {
ret = I40E_ERR_PARAM;
goto error_param;
@@ -2701,7 +2727,7 @@ static int i40e_vc_del_mac_addr_msg(stru
i40e_status ret = 0;
int i;
- if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states) ||
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE) ||
!i40e_vc_isvalid_vsi_id(vf, al->vsi_id)) {
ret = I40E_ERR_PARAM;
goto error_param;
@@ -2840,7 +2866,7 @@ static int i40e_vc_remove_vlan_msg(struc
i40e_status aq_ret = 0;
int i;
- if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states) ||
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE) ||
!i40e_vc_isvalid_vsi_id(vf, vfl->vsi_id)) {
aq_ret = I40E_ERR_PARAM;
goto error_param;
@@ -2960,9 +2986,9 @@ static int i40e_vc_config_rss_key(struct
struct i40e_vsi *vsi = NULL;
i40e_status aq_ret = 0;
- if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states) ||
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE) ||
!i40e_vc_isvalid_vsi_id(vf, vrk->vsi_id) ||
- (vrk->key_len != I40E_HKEY_ARRAY_SIZE)) {
+ vrk->key_len != I40E_HKEY_ARRAY_SIZE) {
aq_ret = I40E_ERR_PARAM;
goto err;
}
@@ -2991,9 +3017,9 @@ static int i40e_vc_config_rss_lut(struct
i40e_status aq_ret = 0;
u16 i;
- if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states) ||
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE) ||
!i40e_vc_isvalid_vsi_id(vf, vrl->vsi_id) ||
- (vrl->lut_entries != I40E_VF_HLUT_ARRAY_SIZE)) {
+ vrl->lut_entries != I40E_VF_HLUT_ARRAY_SIZE) {
aq_ret = I40E_ERR_PARAM;
goto err;
}
@@ -3026,7 +3052,7 @@ static int i40e_vc_get_rss_hena(struct i
i40e_status aq_ret = 0;
int len = 0;
- if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE)) {
aq_ret = I40E_ERR_PARAM;
goto err;
}
@@ -3062,7 +3088,7 @@ static int i40e_vc_set_rss_hena(struct i
struct i40e_hw *hw = &pf->hw;
i40e_status aq_ret = 0;
- if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE)) {
aq_ret = I40E_ERR_PARAM;
goto err;
}
@@ -3087,7 +3113,7 @@ static int i40e_vc_enable_vlan_stripping
i40e_status aq_ret = 0;
struct i40e_vsi *vsi;
- if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE)) {
aq_ret = I40E_ERR_PARAM;
goto err;
}
@@ -3113,7 +3139,7 @@ static int i40e_vc_disable_vlan_strippin
i40e_status aq_ret = 0;
struct i40e_vsi *vsi;
- if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE)) {
aq_ret = I40E_ERR_PARAM;
goto err;
}
@@ -3340,7 +3366,7 @@ static int i40e_vc_del_cloud_filter(stru
i40e_status aq_ret = 0;
int i, ret;
- if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE)) {
aq_ret = I40E_ERR_PARAM;
goto err;
}
@@ -3471,7 +3497,7 @@ static int i40e_vc_add_cloud_filter(stru
i40e_status aq_ret = 0;
int i, ret;
- if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE)) {
aq_ret = I40E_ERR_PARAM;
goto err_out;
}
@@ -3580,7 +3606,7 @@ static int i40e_vc_add_qch_msg(struct i4
i40e_status aq_ret = 0;
u64 speed = 0;
- if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE)) {
aq_ret = I40E_ERR_PARAM;
goto err;
}
@@ -3715,7 +3741,7 @@ static int i40e_vc_del_qch_msg(struct i4
struct i40e_pf *pf = vf->pf;
i40e_status aq_ret = 0;
- if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
+ if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE)) {
aq_ret = I40E_ERR_PARAM;
goto err;
}
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
@@ -19,6 +19,8 @@
#define I40E_MAX_VF_PROMISC_FLAGS 3
+#define I40E_VF_STATE_WAIT_COUNT 20
+
/* Various queue ctrls */
enum i40e_queue_ctrl {
I40E_QUEUE_CTRL_UNKNOWN = 0,
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 53/88] i40e: Fix pre-set max number of queues for VF
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (51 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 52/88] i40e: Fix failed opcode appearing if handling messages from VF Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 54/88] mtd: rawnand: fsmc: Take instruction delay into account Greg Kroah-Hartman
` (41 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Grzegorz Szczurek,
Mateusz Palczewski, Bindushree P, Tony Nguyen
From: Mateusz Palczewski <mateusz.palczewski@intel.com>
commit 8aa55ab422d9d0d825ebfb877702ed661e96e682 upstream.
After setting pre-set combined to 16 queues and reserving 16 queues by
tc qdisc, pre-set maximum combined queues returned to default value
after VF reset being 4 and this generated errors during removing tc.
Fixed by removing clear num_req_queues before reset VF.
Fixes: e284fc280473 (i40e: Add and delete cloud filter)
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Bindushree P <Bindushree.p@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 5 -----
1 file changed, 5 deletions(-)
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -3713,11 +3713,6 @@ static int i40e_vc_add_qch_msg(struct i4
/* set this flag only after making sure all inputs are sane */
vf->adq_enabled = true;
- /* num_req_queues is set when user changes number of queues via ethtool
- * and this causes issue for default VSI(which depends on this variable)
- * when ADq is enabled, hence reset it.
- */
- vf->num_req_queues = 0;
/* reset the VF in order to allocate resources */
i40e_vc_notify_vf_reset(vf);
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 54/88] mtd: rawnand: fsmc: Take instruction delay into account
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (52 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 53/88] i40e: Fix pre-set max number of queues for VF Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 55/88] mtd: rawnand: fsmc: Fix timing computation Greg Kroah-Hartman
` (40 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Herve Codina, Miquel Raynal
From: Herve Codina <herve.codina@bootlin.com>
commit a4ca0c439f2d5ce9a3dc118d882f9f03449864c8 upstream.
The FSMC NAND controller should apply a delay after the
instruction has been issued on the bus.
The FSMC NAND controller driver did not handle this delay.
Add this waiting delay in the FSMC NAND controller driver.
Fixes: 4da712e70294 ("mtd: nand: fsmc: use ->exec_op()")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-4-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mtd/nand/raw/fsmc_nand.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ b/drivers/mtd/nand/raw/fsmc_nand.c
@@ -15,6 +15,7 @@
#include <linux/clk.h>
#include <linux/completion.h>
+#include <linux/delay.h>
#include <linux/dmaengine.h>
#include <linux/dma-direction.h>
#include <linux/dma-mapping.h>
@@ -650,6 +651,9 @@ static int fsmc_exec_op(struct nand_chip
instr->ctx.waitrdy.timeout_ms);
break;
}
+
+ if (instr->delay_ns)
+ ndelay(instr->delay_ns);
}
return ret;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 55/88] mtd: rawnand: fsmc: Fix timing computation
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (53 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 54/88] mtd: rawnand: fsmc: Take instruction delay into account Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 56/88] dt-bindings: net: Reintroduce PHY no lane swap binding Greg Kroah-Hartman
` (39 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Herve Codina, Miquel Raynal
From: Herve Codina <herve.codina@bootlin.com>
commit 9472335eaa1452b51dc8e8edaa1a342997cb80c7 upstream.
Under certain circumstances, the timing settings calculated by
the FSMC NAND controller driver were inaccurate.
These settings led to incorrect data reads or fallback to
timing mode 0 depending on the NAND chip used.
The timing computation did not take into account the following
constraint given in SPEAr3xx reference manual:
twait >= tCEA - (tset * TCLK) + TOUTDEL + TINDEL
Enhance the timings calculation by taking into account this
additional constraint.
This change has no impact on slow timing modes such as mode 0.
Indeed, on mode 0, computed values are the same with and
without the patch.
NANDs which previously stayed in mode 0 because of fallback to
mode 0 can now work at higher speeds and NANDs which were not
working at all because of the corrupted data work at high
speeds without troubles.
Overall improvement on a Micron/MT29F1G08 (flash_speed tool):
mode0 mode3
eraseblock write speed 3220 KiB/s 4511 KiB/s
eraseblock read speed 4491 KiB/s 7529 KiB/s
Fixes: d9fb079571833 ("mtd: nand: fsmc: add support for SDR timings")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-5-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mtd/nand/raw/fsmc_nand.c | 32 ++++++++++++++++++++++++--------
1 file changed, 24 insertions(+), 8 deletions(-)
--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ b/drivers/mtd/nand/raw/fsmc_nand.c
@@ -94,6 +94,14 @@
#define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ)
+/*
+ * According to SPEAr300 Reference Manual (RM0082)
+ * TOUDEL = 7ns (Output delay from the flip-flops to the board)
+ * TINDEL = 5ns (Input delay from the board to the flipflop)
+ */
+#define TOUTDEL 7000
+#define TINDEL 5000
+
struct fsmc_nand_timings {
u8 tclr;
u8 tar;
@@ -278,7 +286,7 @@ static int fsmc_calc_timings(struct fsmc
{
unsigned long hclk = clk_get_rate(host->clk);
unsigned long hclkn = NSEC_PER_SEC / hclk;
- u32 thiz, thold, twait, tset;
+ u32 thiz, thold, twait, tset, twait_min;
if (sdrt->tRC_min < 30000)
return -EOPNOTSUPP;
@@ -310,13 +318,6 @@ static int fsmc_calc_timings(struct fsmc
else if (tims->thold > FSMC_THOLD_MASK)
tims->thold = FSMC_THOLD_MASK;
- twait = max(sdrt->tRP_min, sdrt->tWP_min);
- tims->twait = DIV_ROUND_UP(twait / 1000, hclkn) - 1;
- if (tims->twait == 0)
- tims->twait = 1;
- else if (tims->twait > FSMC_TWAIT_MASK)
- tims->twait = FSMC_TWAIT_MASK;
-
tset = max(sdrt->tCS_min - sdrt->tWP_min,
sdrt->tCEA_max - sdrt->tREA_max);
tims->tset = DIV_ROUND_UP(tset / 1000, hclkn) - 1;
@@ -325,6 +326,21 @@ static int fsmc_calc_timings(struct fsmc
else if (tims->tset > FSMC_TSET_MASK)
tims->tset = FSMC_TSET_MASK;
+ /*
+ * According to SPEAr300 Reference Manual (RM0082) which gives more
+ * information related to FSMSC timings than the SPEAr600 one (RM0305),
+ * twait >= tCEA - (tset * TCLK) + TOUTDEL + TINDEL
+ */
+ twait_min = sdrt->tCEA_max - ((tims->tset + 1) * hclkn * 1000)
+ + TOUTDEL + TINDEL;
+ twait = max3(sdrt->tRP_min, sdrt->tWP_min, twait_min);
+
+ tims->twait = DIV_ROUND_UP(twait / 1000, hclkn) - 1;
+ if (tims->twait == 0)
+ tims->twait = 1;
+ else if (tims->twait > FSMC_TWAIT_MASK)
+ tims->twait = FSMC_TWAIT_MASK;
+
return 0;
}
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 56/88] dt-bindings: net: Reintroduce PHY no lane swap binding
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (54 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 55/88] mtd: rawnand: fsmc: Fix timing computation Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 57/88] tools build: Remove needless libpython-version feature check that breaks test-all fast path Greg Kroah-Hartman
` (38 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexander Stein, Andrew Lunn, Rob Herring
From: Alexander Stein <alexander.stein@ew.tq-group.com>
commit 96db48c9d777a73a33b1d516c5cfed7a417a5f40 upstream.
This binding was already documented in phy.txt, commit 252ae5330daa
("Documentation: devicetree: Add PHY no lane swap binding"), but got
accidently removed during YAML conversion in commit d8704342c109
("dt-bindings: net: Add a YAML schemas for the generic PHY options").
Note: 'enet-phy-lane-no-swap' and the absence of 'enet-phy-lane-swap' are
not identical, as the former one disable this feature, while the latter
one doesn't change anything.
Fixes: d8704342c109 ("dt-bindings: net: Add a YAML schemas for the generic PHY options")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20211130082756.713919-1-alexander.stein@ew.tq-group.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/devicetree/bindings/net/ethernet-phy.yaml | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -87,6 +87,14 @@ properties:
compensate for the board being designed with the lanes
swapped.
+ enet-phy-lane-no-swap:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ If set, indicates that PHY will disable swap of the
+ TX/RX lanes. This property allows the PHY to work correcly after
+ e.g. wrong bootstrap configuration caused by issues in PCB
+ layout design.
+
eee-broken-100tx:
$ref: /schemas/types.yaml#definitions/flag
description:
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 57/88] tools build: Remove needless libpython-version feature check that breaks test-all fast path
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (55 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 56/88] dt-bindings: net: Reintroduce PHY no lane swap binding Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 58/88] net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero Greg Kroah-Hartman
` (37 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, James Clark, Adrian Hunter,
Ian Rogers, Jaroslav Škarvada, Jiri Olsa, Namhyung Kim,
Arnaldo Carvalho de Melo
From: Arnaldo Carvalho de Melo <acme@redhat.com>
commit 3d1d57debee2d342a47615707588b96658fabb85 upstream.
Since 66dfdff03d196e51 ("perf tools: Add Python 3 support") we don't use
the tools/build/feature/test-libpython-version.c version in any Makefile
feature check:
$ find tools/ -type f | xargs grep feature-libpython-version
$
The only place where this was used was removed in 66dfdff03d196e51:
- ifneq ($(feature-libpython-version), 1)
- $(warning Python 3 is not yet supported; please set)
- $(warning PYTHON and/or PYTHON_CONFIG appropriately.)
- $(warning If you also have Python 2 installed, then)
- $(warning try something like:)
- $(warning $(and ,))
- $(warning $(and ,) make PYTHON=python2)
- $(warning $(and ,))
- $(warning Otherwise, disable Python support entirely:)
- $(warning $(and ,))
- $(warning $(and ,) make NO_LIBPYTHON=1)
- $(warning $(and ,))
- $(error $(and ,))
- else
- LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
- EXTLIBS += $(PYTHON_EMBED_LIBADD)
- LANG_BINDINGS += $(obj-perf)python/perf.so
- $(call detected,CONFIG_LIBPYTHON)
- endif
And nowadays we either build with PYTHON=python3 or just install the
python3 devel packages and perf will build against it.
But the leftover feature-libpython-version check made the fast path
feature detection to break in all cases except when python2 devel files
were installed:
$ rpm -qa | grep python.*devel
python3-devel-3.9.7-1.fc34.x86_64
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;
$ make -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory '/var/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j32' parallel build
HOSTCC /tmp/build/perf/fixdep.o
<SNIP>
$ cat /tmp/build/perf/feature/test-all.make.output
In file included from test-all.c:18:
test-libpython-version.c:5:10: error: #error
5 | #error
| ^~~~~
$ ldd ~/bin/perf | grep python
libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007fda6dbcf000)
$
As python3 is the norm these days, fix this by just removing the unused
feature-libpython-version feature check, making the test-all fast path
to work with the common case.
With this:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;
$ make -C tools/perf O=/tmp/build/perf install-bin |& head
make: Entering directory '/var/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j32' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
$ ldd ~/bin/perf | grep python
libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007f58800b0000)
$ cat /tmp/build/perf/feature/test-all.make.output
$
Reviewed-by: James Clark <james.clark@arm.com>
Fixes: 66dfdff03d196e51 ("perf tools: Add Python 3 support")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jaroslav Škarvada <jskarvad@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YaYmeeC6CS2b8OSz@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/build/Makefile.feature | 1 -
tools/build/feature/Makefile | 4 ----
tools/build/feature/test-all.c | 5 -----
tools/build/feature/test-libpython-version.c | 11 -----------
tools/perf/Makefile.config | 2 --
5 files changed, 23 deletions(-)
delete mode 100644 tools/build/feature/test-libpython-version.c
--- a/tools/build/Makefile.feature
+++ b/tools/build/Makefile.feature
@@ -52,7 +52,6 @@ FEATURE_TESTS_BASIC :=
numa_num_possible_cpus \
libperl \
libpython \
- libpython-version \
libslang \
libslang-include-subdir \
libcrypto \
--- a/tools/build/feature/Makefile
+++ b/tools/build/feature/Makefile
@@ -30,7 +30,6 @@ FILES=
test-numa_num_possible_cpus.bin \
test-libperl.bin \
test-libpython.bin \
- test-libpython-version.bin \
test-libslang.bin \
test-libslang-include-subdir.bin \
test-libcrypto.bin \
@@ -214,9 +213,6 @@ $(OUTPUT)test-libperl.bin:
$(OUTPUT)test-libpython.bin:
$(BUILD) $(FLAGS_PYTHON_EMBED)
-$(OUTPUT)test-libpython-version.bin:
- $(BUILD)
-
$(OUTPUT)test-libbfd.bin:
$(BUILD) -DPACKAGE='"perf"' -lbfd -ldl
--- a/tools/build/feature/test-all.c
+++ b/tools/build/feature/test-all.c
@@ -14,10 +14,6 @@
# include "test-libpython.c"
#undef main
-#define main main_test_libpython_version
-# include "test-libpython-version.c"
-#undef main
-
#define main main_test_libperl
# include "test-libperl.c"
#undef main
@@ -193,7 +189,6 @@
int main(int argc, char *argv[])
{
main_test_libpython();
- main_test_libpython_version();
main_test_libperl();
main_test_hello();
main_test_libelf();
--- a/tools/build/feature/test-libpython-version.c
+++ /dev/null
@@ -1,11 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <Python.h>
-
-#if PY_VERSION_HEX >= 0x03000000
- #error
-#endif
-
-int main(void)
-{
- return 0;
-}
--- a/tools/perf/Makefile.config
+++ b/tools/perf/Makefile.config
@@ -247,8 +247,6 @@ endif
FEATURE_CHECK_CFLAGS-libpython := $(PYTHON_EMBED_CCOPTS)
FEATURE_CHECK_LDFLAGS-libpython := $(PYTHON_EMBED_LDOPTS)
-FEATURE_CHECK_CFLAGS-libpython-version := $(PYTHON_EMBED_CCOPTS)
-FEATURE_CHECK_LDFLAGS-libpython-version := $(PYTHON_EMBED_LDOPTS)
FEATURE_CHECK_LDFLAGS-libaio = -lrt
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 58/88] net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (56 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 57/88] tools build: Remove needless libpython-version feature check that breaks test-all fast path Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 59/88] net: altera: set a couple error code in probe() Greg Kroah-Hartman
` (36 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oliver Neukum, Lee Jones,
Bjørn Mork, Jakub Kicinski
From: Lee Jones <lee.jones@linaro.org>
commit 2be6d4d16a0849455a5c22490e3c5983495fed00 upstream.
Currently, due to the sequential use of min_t() and clamp_t() macros,
in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is not set, the logic
sets tx_max to 0. This is then used to allocate the data area of the
SKB requested later in cdc_ncm_fill_tx_frame().
This does not cause an issue presently because when memory is
allocated during initialisation phase of SKB creation, more memory
(512b) is allocated than is required for the SKB headers alone (320b),
leaving some space (512b - 320b = 192b) for CDC data (172b).
However, if more elements (for example 3 x u64 = [24b]) were added to
one of the SKB header structs, say 'struct skb_shared_info',
increasing its original size (320b [320b aligned]) to something larger
(344b [384b aligned]), then suddenly the CDC data (172b) no longer
fits in the spare SKB data area (512b - 384b = 128b).
Consequently the SKB bounds checking semantics fails and panics:
skbuff: skb_over_panic: text:ffffffff830a5b5f len:184 put:172 \
head:ffff888119227c00 data:ffff888119227c00 tail:0xb8 end:0x80 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:110!
RIP: 0010:skb_panic+0x14f/0x160 net/core/skbuff.c:106
<snip>
Call Trace:
<IRQ>
skb_over_panic+0x2c/0x30 net/core/skbuff.c:115
skb_put+0x205/0x210 net/core/skbuff.c:1877
skb_put_zero include/linux/skbuff.h:2270 [inline]
cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1116 [inline]
cdc_ncm_fill_tx_frame+0x127f/0x3d50 drivers/net/usb/cdc_ncm.c:1293
cdc_ncm_tx_fixup+0x98/0xf0 drivers/net/usb/cdc_ncm.c:1514
By overriding the max value with the default CDC_NCM_NTB_MAX_SIZE_TX
when not offered through the system provided params, we ensure enough
data space is allocated to handle the CDC data, meaning no crash will
occur.
Cc: Oliver Neukum <oliver@neukum.org>
Fixes: 289507d3364f9 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20211202143437.1411410-1-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/cdc_ncm.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -177,6 +177,8 @@ static u32 cdc_ncm_check_tx_max(struct u
/* clamp new_tx to sane values */
min = ctx->max_datagram_size + ctx->max_ndp_size + sizeof(struct usb_cdc_ncm_nth16);
max = min_t(u32, CDC_NCM_NTB_MAX_SIZE_TX, le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize));
+ if (max == 0)
+ max = CDC_NCM_NTB_MAX_SIZE_TX; /* dwNtbOutMaxSize not set */
/* some devices set dwNtbOutMaxSize too low for the above default */
min = min(min, max);
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 59/88] net: altera: set a couple error code in probe()
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (57 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 58/88] net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 60/88] net: fec: only clear interrupt of handling queue in fec_enet_rx_queue() Greg Kroah-Hartman
` (35 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Carpenter, David S. Miller
From: Dan Carpenter <dan.carpenter@oracle.com>
commit badd7857f5c933a3dc34942a2c11d67fdbdc24de upstream.
There are two error paths which accidentally return success instead of
a negative error code.
Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/altera/altera_tse_main.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/altera/altera_tse_main.c
+++ b/drivers/net/ethernet/altera/altera_tse_main.c
@@ -1431,16 +1431,19 @@ static int altera_tse_probe(struct platf
priv->rxdescmem_busaddr = dma_res->start;
} else {
+ ret = -ENODEV;
goto err_free_netdev;
}
- if (!dma_set_mask(priv->device, DMA_BIT_MASK(priv->dmaops->dmamask)))
+ if (!dma_set_mask(priv->device, DMA_BIT_MASK(priv->dmaops->dmamask))) {
dma_set_coherent_mask(priv->device,
DMA_BIT_MASK(priv->dmaops->dmamask));
- else if (!dma_set_mask(priv->device, DMA_BIT_MASK(32)))
+ } else if (!dma_set_mask(priv->device, DMA_BIT_MASK(32))) {
dma_set_coherent_mask(priv->device, DMA_BIT_MASK(32));
- else
+ } else {
+ ret = -EIO;
goto err_free_netdev;
+ }
/* MAC address space */
ret = request_and_map(pdev, "control_port", &control_port,
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 60/88] net: fec: only clear interrupt of handling queue in fec_enet_rx_queue()
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (58 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 59/88] net: altera: set a couple error code in probe() Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 61/88] net, neigh: clear whole pneigh_entry at alloc time Greg Kroah-Hartman
` (34 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Russell King, Nicolas Diaz,
Joakim Zhang, Jakub Kicinski
From: Joakim Zhang <qiangqing.zhang@nxp.com>
commit b5bd95d17102b6719e3531d627875b9690371383 upstream.
Background:
We have a customer is running a Profinet stack on the 8MM which receives and
responds PNIO packets every 4ms and PNIO-CM packets every 40ms. However, from
time to time the received PNIO-CM package is "stock" and is only handled when
receiving a new PNIO-CM or DCERPC-Ping packet (tcpdump shows the PNIO-CM and
the DCERPC-Ping packet at the same time but the PNIO-CM HW timestamp is from
the expected 40 ms and not the 2s delay of the DCERPC-Ping).
After debugging, we noticed PNIO, PNIO-CM and DCERPC-Ping packets would
be handled by different RX queues.
The root cause should be driver ack all queues' interrupt when handle a
specific queue in fec_enet_rx_queue(). The blamed patch is introduced to
receive as much packets as possible once to avoid interrupt flooding.
But it's unreasonable to clear other queues'interrupt when handling one
queue, this patch tries to fix it.
Fixes: ed63f1dcd578 (net: fec: clear receive interrupts before processing a packet)
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Reported-by: Nicolas Diaz <nicolas.diaz@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20211206135457.15946-1-qiangqing.zhang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/freescale/fec.h | 3 +++
drivers/net/ethernet/freescale/fec_main.c | 2 +-
2 files changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -373,6 +373,9 @@ struct bufdesc_ex {
#define FEC_ENET_WAKEUP ((uint)0x00020000) /* Wakeup request */
#define FEC_ENET_TXF (FEC_ENET_TXF_0 | FEC_ENET_TXF_1 | FEC_ENET_TXF_2)
#define FEC_ENET_RXF (FEC_ENET_RXF_0 | FEC_ENET_RXF_1 | FEC_ENET_RXF_2)
+#define FEC_ENET_RXF_GET(X) (((X) == 0) ? FEC_ENET_RXF_0 : \
+ (((X) == 1) ? FEC_ENET_RXF_1 : \
+ FEC_ENET_RXF_2))
#define FEC_ENET_TS_AVAIL ((uint)0x00010000)
#define FEC_ENET_TS_TIMER ((uint)0x00008000)
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1444,7 +1444,7 @@ fec_enet_rx_queue(struct net_device *nde
break;
pkt_received++;
- writel(FEC_ENET_RXF, fep->hwp + FEC_IEVENT);
+ writel(FEC_ENET_RXF_GET(queue_id), fep->hwp + FEC_IEVENT);
/* Check for errors. */
status ^= BD_ENET_RX_LAST;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 61/88] net, neigh: clear whole pneigh_entry at alloc time
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (59 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 60/88] net: fec: only clear interrupt of handling queue in fec_enet_rx_queue() Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 62/88] net/qla3xxx: fix an error code in ql_adapter_up() Greg Kroah-Hartman
` (33 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Roopa Prabhu,
David Ahern, Jakub Kicinski
From: Eric Dumazet <edumazet@google.com>
commit e195e9b5dee6459d8c8e6a314cc71a644a0537fd upstream.
Commit 2c611ad97a82 ("net, neigh: Extend neigh->flags to 32 bit
to allow for extensions") enables a new KMSAM warning [1]
I think the bug is actually older, because the following intruction
only occurred if ndm->ndm_flags had NTF_PROXY set.
pn->flags = ndm->ndm_flags;
Let's clear all pneigh_entry fields at alloc time.
[1]
BUG: KMSAN: uninit-value in pneigh_fill_info+0x986/0xb30 net/core/neighbour.c:2593
pneigh_fill_info+0x986/0xb30 net/core/neighbour.c:2593
pneigh_dump_table net/core/neighbour.c:2715 [inline]
neigh_dump_info+0x1e3f/0x2c60 net/core/neighbour.c:2832
netlink_dump+0xaca/0x16a0 net/netlink/af_netlink.c:2265
__netlink_dump_start+0xd1c/0xee0 net/netlink/af_netlink.c:2370
netlink_dump_start include/linux/netlink.h:254 [inline]
rtnetlink_rcv_msg+0x181b/0x18c0 net/core/rtnetlink.c:5534
netlink_rcv_skb+0x447/0x800 net/netlink/af_netlink.c:2491
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5589
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x1095/0x1360 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x16f3/0x1870 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
sock_write_iter+0x594/0x690 net/socket.c:1057
call_write_iter include/linux/fs.h:2162 [inline]
new_sync_write fs/read_write.c:503 [inline]
vfs_write+0x1318/0x2030 fs/read_write.c:590
ksys_write+0x28c/0x520 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__x64_sys_write+0xdb/0x120 fs/read_write.c:652
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
slab_alloc mm/slub.c:3259 [inline]
__kmalloc+0xc3c/0x12d0 mm/slub.c:4437
kmalloc include/linux/slab.h:595 [inline]
pneigh_lookup+0x60f/0xd70 net/core/neighbour.c:766
arp_req_set_public net/ipv4/arp.c:1016 [inline]
arp_req_set+0x430/0x10a0 net/ipv4/arp.c:1032
arp_ioctl+0x8d4/0xb60 net/ipv4/arp.c:1232
inet_ioctl+0x4ef/0x820 net/ipv4/af_inet.c:947
sock_do_ioctl net/socket.c:1118 [inline]
sock_ioctl+0xa3f/0x13e0 net/socket.c:1235
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl+0x2df/0x4a0 fs/ioctl.c:860
__x64_sys_ioctl+0xd8/0x110 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
CPU: 1 PID: 20001 Comm: syz-executor.0 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 62dd93181aaa ("[IPV6] NDISC: Set per-entry is_router flag in Proxy NA.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211206165329.1049835-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/core/neighbour.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -734,11 +734,10 @@ struct pneigh_entry * pneigh_lookup(stru
ASSERT_RTNL();
- n = kmalloc(sizeof(*n) + key_len, GFP_KERNEL);
+ n = kzalloc(sizeof(*n) + key_len, GFP_KERNEL);
if (!n)
goto out;
- n->protocol = 0;
write_pnet(&n->net, net);
memcpy(n->key, pkey, key_len);
n->dev = dev;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 62/88] net/qla3xxx: fix an error code in ql_adapter_up()
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (60 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 61/88] net, neigh: clear whole pneigh_entry at alloc time Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 63/88] selftests/fib_tests: Rework fib_rp_filter_test() Greg Kroah-Hartman
` (32 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Jakub Kicinski
From: Dan Carpenter <dan.carpenter@oracle.com>
commit d17b9737c2bc09b4ac6caf469826e5a7ce3ffab7 upstream.
The ql_wait_for_drvr_lock() fails and returns false, then this
function should return an error code instead of returning success.
The other problem is that the success path prints an error message
netdev_err(ndev, "Releasing driver lock\n"); Delete that and
re-order the code a little to make it more clear.
Fixes: 5a4faa873782 ("[PATCH] qla3xxx NIC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211207082416.GA16110@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/qlogic/qla3xxx.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
--- a/drivers/net/ethernet/qlogic/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -3495,20 +3495,19 @@ static int ql_adapter_up(struct ql3_adap
spin_lock_irqsave(&qdev->hw_lock, hw_flags);
- err = ql_wait_for_drvr_lock(qdev);
- if (err) {
- err = ql_adapter_initialize(qdev);
- if (err) {
- netdev_err(ndev, "Unable to initialize adapter\n");
- goto err_init;
- }
- netdev_err(ndev, "Releasing driver lock\n");
- ql_sem_unlock(qdev, QL_DRVR_SEM_MASK);
- } else {
+ if (!ql_wait_for_drvr_lock(qdev)) {
netdev_err(ndev, "Could not acquire driver lock\n");
+ err = -ENODEV;
goto err_lock;
}
+ err = ql_adapter_initialize(qdev);
+ if (err) {
+ netdev_err(ndev, "Unable to initialize adapter\n");
+ goto err_init;
+ }
+ ql_sem_unlock(qdev, QL_DRVR_SEM_MASK);
+
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
set_bit(QL_ADAPTER_UP, &qdev->flags);
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 63/88] selftests/fib_tests: Rework fib_rp_filter_test()
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (61 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 62/88] net/qla3xxx: fix an error code in ql_adapter_up() Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 64/88] USB: gadget: detect too-big endpoint 0 requests Greg Kroah-Hartman
` (31 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hangbin Liu, Cong Wang, Peilin Ye,
David Ahern, Jakub Kicinski
From: Peilin Ye <peilin.ye@bytedance.com>
commit f6071e5e3961eeb5300bd0901c9e128598730ae3 upstream.
Currently rp_filter tests in fib_tests.sh:fib_rp_filter_test() are
failing. ping sockets are bound to dummy1 using the "-I" option
(SO_BINDTODEVICE), but socket lookup is failing when receiving ping
replies, since the routing table thinks they belong to dummy0.
For example, suppose ping is using a SOCK_RAW socket for ICMP messages.
When receiving ping replies, in __raw_v4_lookup(), sk->sk_bound_dev_if
is 3 (dummy1), but dif (skb_rtable(skb)->rt_iif) says 2 (dummy0), so the
raw_sk_bound_dev_eq() check fails. Similar things happen in
ping_lookup() for SOCK_DGRAM sockets.
These tests used to pass due to a bug [1] in iputils, where "ping -I"
actually did not bind ICMP message sockets to device. The bug has been
fixed by iputils commit f455fee41c07 ("ping: also bind the ICMP socket
to the specific device") in 2016, which is why our rp_filter tests
started to fail. See [2] .
Fixing the tests while keeping everything in one netns turns out to be
nontrivial. Rework the tests and build the following topology:
┌─────────────────────────────┐ ┌─────────────────────────────┐
│ network namespace 1 (ns1) │ │ network namespace 2 (ns2) │
│ │ │ │
│ ┌────┐ ┌─────┐ │ │ ┌─────┐ ┌────┐ │
│ │ lo │<───>│veth1│<────────┼────┼─>│veth2│<──────────>│ lo │ │
│ └────┘ ├─────┴──────┐ │ │ ├─────┴──────┐ └────┘ │
│ │192.0.2.1/24│ │ │ │192.0.2.1/24│ │
│ └────────────┘ │ │ └────────────┘ │
└─────────────────────────────┘ └─────────────────────────────┘
Consider sending an ICMP_ECHO packet A in ns2. Both source and
destination IP addresses are 192.0.2.1, and we use strict mode rp_filter
in both ns1 and ns2:
1. A is routed to lo since its destination IP address is one of ns2's
local addresses (veth2);
2. A is redirected from lo's egress to veth2's egress using mirred;
3. A arrives at veth1's ingress in ns1;
4. A is redirected from veth1's ingress to lo's ingress, again, using
mirred;
5. In __fib_validate_source(), fib_info_nh_uses_dev() returns false,
since A was received on lo, but reverse path lookup says veth1;
6. However A is not dropped since we have relaxed this check for lo in
commit 66f8209547cc ("fib: relax source validation check for loopback
packets");
Making sure A is not dropped here in this corner case is the whole point
of having this test.
7. As A reaches the ICMP layer, an ICMP_ECHOREPLY packet, B, is
generated;
8. Similarly, B is redirected from lo's egress to veth1's egress (in
ns1), then redirected once again from veth2's ingress to lo's
ingress (in ns2), using mirred.
Also test "ping 127.0.0.1" from ns2. It does not trigger the relaxed
check in __fib_validate_source(), but just to make sure the topology
works with loopback addresses.
Tested with ping from iputils 20210722-41-gf9fb573:
$ ./fib_tests.sh -t rp_filter
IPv4 rp_filter tests
TEST: rp_filter passes local packets [ OK ]
TEST: rp_filter passes loopback packets [ OK ]
[1] https://github.com/iputils/iputils/issues/55
[2] https://github.com/iputils/iputils/commit/f455fee41c077d4b700a473b2f5b3487b8febc1d
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: adb701d6cfa4 ("selftests: add a test case for rp_filter")
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211201004720.6357-1-yepeilin.cs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/net/fib_tests.sh | 59 +++++++++++++++++++++++++------
1 file changed, 49 insertions(+), 10 deletions(-)
--- a/tools/testing/selftests/net/fib_tests.sh
+++ b/tools/testing/selftests/net/fib_tests.sh
@@ -444,24 +444,63 @@ fib_rp_filter_test()
setup
set -e
+ ip netns add ns2
+ ip netns set ns2 auto
+
+ ip -netns ns2 link set dev lo up
+
+ $IP link add name veth1 type veth peer name veth2
+ $IP link set dev veth2 netns ns2
+ $IP address add 192.0.2.1/24 dev veth1
+ ip -netns ns2 address add 192.0.2.1/24 dev veth2
+ $IP link set dev veth1 up
+ ip -netns ns2 link set dev veth2 up
+
$IP link set dev lo address 52:54:00:6a:c7:5e
- $IP link set dummy0 address 52:54:00:6a:c7:5e
- $IP link add dummy1 type dummy
- $IP link set dummy1 address 52:54:00:6a:c7:5e
- $IP link set dev dummy1 up
+ $IP link set dev veth1 address 52:54:00:6a:c7:5e
+ ip -netns ns2 link set dev lo address 52:54:00:6a:c7:5e
+ ip -netns ns2 link set dev veth2 address 52:54:00:6a:c7:5e
+
+ # 1. (ns2) redirect lo's egress to veth2's egress
+ ip netns exec ns2 tc qdisc add dev lo parent root handle 1: fq_codel
+ ip netns exec ns2 tc filter add dev lo parent 1: protocol arp basic \
+ action mirred egress redirect dev veth2
+ ip netns exec ns2 tc filter add dev lo parent 1: protocol ip basic \
+ action mirred egress redirect dev veth2
+
+ # 2. (ns1) redirect veth1's ingress to lo's ingress
+ $NS_EXEC tc qdisc add dev veth1 ingress
+ $NS_EXEC tc filter add dev veth1 ingress protocol arp basic \
+ action mirred ingress redirect dev lo
+ $NS_EXEC tc filter add dev veth1 ingress protocol ip basic \
+ action mirred ingress redirect dev lo
+
+ # 3. (ns1) redirect lo's egress to veth1's egress
+ $NS_EXEC tc qdisc add dev lo parent root handle 1: fq_codel
+ $NS_EXEC tc filter add dev lo parent 1: protocol arp basic \
+ action mirred egress redirect dev veth1
+ $NS_EXEC tc filter add dev lo parent 1: protocol ip basic \
+ action mirred egress redirect dev veth1
+
+ # 4. (ns2) redirect veth2's ingress to lo's ingress
+ ip netns exec ns2 tc qdisc add dev veth2 ingress
+ ip netns exec ns2 tc filter add dev veth2 ingress protocol arp basic \
+ action mirred ingress redirect dev lo
+ ip netns exec ns2 tc filter add dev veth2 ingress protocol ip basic \
+ action mirred ingress redirect dev lo
+
$NS_EXEC sysctl -qw net.ipv4.conf.all.rp_filter=1
$NS_EXEC sysctl -qw net.ipv4.conf.all.accept_local=1
$NS_EXEC sysctl -qw net.ipv4.conf.all.route_localnet=1
-
- $NS_EXEC tc qd add dev dummy1 parent root handle 1: fq_codel
- $NS_EXEC tc filter add dev dummy1 parent 1: protocol arp basic action mirred egress redirect dev lo
- $NS_EXEC tc filter add dev dummy1 parent 1: protocol ip basic action mirred egress redirect dev lo
+ ip netns exec ns2 sysctl -qw net.ipv4.conf.all.rp_filter=1
+ ip netns exec ns2 sysctl -qw net.ipv4.conf.all.accept_local=1
+ ip netns exec ns2 sysctl -qw net.ipv4.conf.all.route_localnet=1
set +e
- run_cmd "ip netns exec ns1 ping -I dummy1 -w1 -c1 198.51.100.1"
+ run_cmd "ip netns exec ns2 ping -w1 -c1 192.0.2.1"
log_test $? 0 "rp_filter passes local packets"
- run_cmd "ip netns exec ns1 ping -I dummy1 -w1 -c1 127.0.0.1"
+ run_cmd "ip netns exec ns2 ping -w1 -c1 127.0.0.1"
log_test $? 0 "rp_filter passes loopback packets"
cleanup
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 64/88] USB: gadget: detect too-big endpoint 0 requests
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (62 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 63/88] selftests/fib_tests: Rework fib_rp_filter_test() Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 65/88] USB: gadget: zero allocate endpoint 0 buffers Greg Kroah-Hartman
` (30 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Szymon Heidrich
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 153a2d7e3350cc89d406ba2d35be8793a64c2038 upstream.
Sometimes USB hosts can ask for buffers that are too large from endpoint
0, which should not be allowed. If this happens for OUT requests, stall
the endpoint, but for IN requests, trim the request size to the endpoint
buffer size.
Co-developed-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/gadget/composite.c | 12 ++++++++++++
drivers/usb/gadget/legacy/dbgp.c | 13 +++++++++++++
drivers/usb/gadget/legacy/inode.c | 16 +++++++++++++++-
3 files changed, 40 insertions(+), 1 deletion(-)
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1648,6 +1648,18 @@ composite_setup(struct usb_gadget *gadge
struct usb_function *f = NULL;
u8 endp;
+ if (w_length > USB_COMP_EP0_BUFSIZ) {
+ if (ctrl->bRequestType == USB_DIR_OUT) {
+ goto done;
+ } else {
+ /* Cast away the const, we are going to overwrite on purpose. */
+ __le16 *temp = (__le16 *)&ctrl->wLength;
+
+ *temp = cpu_to_le16(USB_COMP_EP0_BUFSIZ);
+ w_length = USB_COMP_EP0_BUFSIZ;
+ }
+ }
+
/* partial re-init of the response message; the function or the
* gadget might need to intercept e.g. a control-OUT completion
* when we delegate to it.
--- a/drivers/usb/gadget/legacy/dbgp.c
+++ b/drivers/usb/gadget/legacy/dbgp.c
@@ -345,6 +345,19 @@ static int dbgp_setup(struct usb_gadget
void *data = NULL;
u16 len = 0;
+ if (length > DBGP_REQ_LEN) {
+ if (ctrl->bRequestType == USB_DIR_OUT) {
+ return err;
+ } else {
+ /* Cast away the const, we are going to overwrite on purpose. */
+ __le16 *temp = (__le16 *)&ctrl->wLength;
+
+ *temp = cpu_to_le16(DBGP_REQ_LEN);
+ length = DBGP_REQ_LEN;
+ }
+ }
+
+
if (request == USB_REQ_GET_DESCRIPTOR) {
switch (value>>8) {
case USB_DT_DEVICE:
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -110,6 +110,8 @@ enum ep0_state {
/* enough for the whole queue: most events invalidate others */
#define N_EVENT 5
+#define RBUF_SIZE 256
+
struct dev_data {
spinlock_t lock;
refcount_t count;
@@ -144,7 +146,7 @@ struct dev_data {
struct dentry *dentry;
/* except this scratch i/o buffer for ep0 */
- u8 rbuf [256];
+ u8 rbuf[RBUF_SIZE];
};
static inline void get_dev (struct dev_data *data)
@@ -1333,6 +1335,18 @@ gadgetfs_setup (struct usb_gadget *gadge
u16 w_value = le16_to_cpu(ctrl->wValue);
u16 w_length = le16_to_cpu(ctrl->wLength);
+ if (w_length > RBUF_SIZE) {
+ if (ctrl->bRequestType == USB_DIR_OUT) {
+ return value;
+ } else {
+ /* Cast away the const, we are going to overwrite on purpose. */
+ __le16 *temp = (__le16 *)&ctrl->wLength;
+
+ *temp = cpu_to_le16(RBUF_SIZE);
+ w_length = RBUF_SIZE;
+ }
+ }
+
spin_lock (&dev->lock);
dev->setup_abort = 0;
if (dev->state == STATE_DEV_UNCONNECTED) {
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 65/88] USB: gadget: zero allocate endpoint 0 buffers
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (63 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 64/88] USB: gadget: detect too-big endpoint 0 requests Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 66/88] usb: core: config: fix validation of wMaxPacketValue entries Greg Kroah-Hartman
` (29 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Szymon Heidrich
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86ebbc11bb3f60908a51f3e41a17e3f477c2eaa3 upstream.
Under some conditions, USB gadget devices can show allocated buffer
contents to a host. Fix this up by zero-allocating them so that any
extra data will all just be zeros.
Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Tested-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/gadget/composite.c | 2 +-
drivers/usb/gadget/legacy/dbgp.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -2173,7 +2173,7 @@ int composite_dev_prepare(struct usb_com
if (!cdev->req)
return -ENOMEM;
- cdev->req->buf = kmalloc(USB_COMP_EP0_BUFSIZ, GFP_KERNEL);
+ cdev->req->buf = kzalloc(USB_COMP_EP0_BUFSIZ, GFP_KERNEL);
if (!cdev->req->buf)
goto fail;
--- a/drivers/usb/gadget/legacy/dbgp.c
+++ b/drivers/usb/gadget/legacy/dbgp.c
@@ -137,7 +137,7 @@ static int dbgp_enable_ep_req(struct usb
goto fail_1;
}
- req->buf = kmalloc(DBGP_REQ_LEN, GFP_KERNEL);
+ req->buf = kzalloc(DBGP_REQ_LEN, GFP_KERNEL);
if (!req->buf) {
err = -ENOMEM;
stp = 2;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 66/88] usb: core: config: fix validation of wMaxPacketValue entries
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (64 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 65/88] USB: gadget: zero allocate endpoint 0 buffers Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 67/88] xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspending Greg Kroah-Hartman
` (28 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alan Stern, Pavel Hofman
From: Pavel Hofman <pavel.hofman@ivitera.com>
commit 1a3910c80966e4a76b25ce812f6bea0ef1b1d530 upstream.
The checks performed by commit aed9d65ac327 ("USB: validate
wMaxPacketValue entries in endpoint descriptors") require that initial
value of the maxp variable contains both maximum packet size bits
(10..0) and multiple-transactions bits (12..11). However, the existing
code assings only the maximum packet size bits. This patch assigns all
bits of wMaxPacketSize to the variable.
Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors")
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20211210085219.16796-1-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/core/config.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -409,7 +409,7 @@ static int usb_parse_endpoint(struct dev
* the USB-2 spec requires such endpoints to have wMaxPacketSize = 0
* (see the end of section 5.6.3), so don't warn about them.
*/
- maxp = usb_endpoint_maxp(&endpoint->desc);
+ maxp = le16_to_cpu(endpoint->desc.wMaxPacketSize);
if (maxp == 0 && !(usb_endpoint_xfer_isoc(d) && asnum == 0)) {
dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid wMaxPacketSize 0\n",
cfgno, inum, asnum, d->bEndpointAddress);
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 67/88] xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspending
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (65 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 66/88] usb: core: config: fix validation of wMaxPacketValue entries Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 68/88] usb: core: config: using bit mask instead of individual bits Greg Kroah-Hartman
` (27 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Kai-Heng Feng, Mathias Nyman
From: Kai-Heng Feng <kai.heng.feng@canonical.com>
commit 811ae81320da53a5670c36970cefacca8519f90e upstream.
When the xHCI is quirked with XHCI_RESET_ON_RESUME, runtime resume
routine also resets the controller.
This is bad for USB drivers without reset_resume callback, because
there's no subsequent call of usb_dev_complete() ->
usb_resume_complete() to force rebinding the driver to the device. For
instance, btusb device stops working after xHCI controller is runtime
resumed, if the controlled is quirked with XHCI_RESET_ON_RESUME.
So always take XHCI_RESET_ON_RESUME into account to solve the issue.
Cc: <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211210141735.1384209-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci.c | 4 ----
1 file changed, 4 deletions(-)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3889,7 +3889,6 @@ static void xhci_free_dev(struct usb_hcd
struct xhci_slot_ctx *slot_ctx;
int i, ret;
-#ifndef CONFIG_USB_DEFAULT_PERSIST
/*
* We called pm_runtime_get_noresume when the device was attached.
* Decrement the counter here to allow controller to runtime suspend
@@ -3897,7 +3896,6 @@ static void xhci_free_dev(struct usb_hcd
*/
if (xhci->quirks & XHCI_RESET_ON_RESUME)
pm_runtime_put_noidle(hcd->self.controller);
-#endif
ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__);
/* If the host is halted due to driver unload, we still need to free the
@@ -4049,14 +4047,12 @@ int xhci_alloc_dev(struct usb_hcd *hcd,
xhci_debugfs_create_slot(xhci, slot_id);
-#ifndef CONFIG_USB_DEFAULT_PERSIST
/*
* If resetting upon resume, we can't put the controller into runtime
* suspend if there is a device attached.
*/
if (xhci->quirks & XHCI_RESET_ON_RESUME)
pm_runtime_get_noresume(hcd->self.controller);
-#endif
/* Is this a LS or FS device under a HS hub? */
/* Hub or peripherial? */
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 68/88] usb: core: config: using bit mask instead of individual bits
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (66 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 67/88] xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspending Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 69/88] xhci: avoid race between disable slot command and host runtime suspend Greg Kroah-Hartman
` (26 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alan Stern, Pavel Hofman
From: Pavel Hofman <pavel.hofman@ivitera.com>
commit ca5737396927afd4d57b133fd2874bbcf3421cdb upstream.
Using standard USB_EP_MAXP_MULT_MASK instead of individual bits for
extracting multiple-transactions bits from wMaxPacketSize value.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20211210085219.16796-2-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/core/config.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -425,9 +425,9 @@ static int usb_parse_endpoint(struct dev
maxpacket_maxes = full_speed_maxpacket_maxes;
break;
case USB_SPEED_HIGH:
- /* Bits 12..11 are allowed only for HS periodic endpoints */
+ /* Multiple-transactions bits are allowed only for HS periodic endpoints */
if (usb_endpoint_xfer_int(d) || usb_endpoint_xfer_isoc(d)) {
- i = maxp & (BIT(12) | BIT(11));
+ i = maxp & USB_EP_MAXP_MULT_MASK;
maxp &= ~i;
}
/* fallthrough */
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 69/88] xhci: avoid race between disable slot command and host runtime suspend
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (67 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 68/88] usb: core: config: using bit mask instead of individual bits Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 70/88] iio: trigger: Fix reference counting Greg Kroah-Hartman
` (25 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mathias Nyman
From: Mathias Nyman <mathias.nyman@linux.intel.com>
commit 7faac1953ed1f658f719cdf7bb7303fa5eef822c upstream.
Make xhci_disable_slot() synchronous, thus ensuring it, and
xhci_free_dev() calling it return after xHC controller completes
the disable slot command.
Otherwise the roothub and xHC host may runtime suspend, and clear the
command ring while the disable slot command is being processed.
This causes a command completion mismatch as the completion event can't
be mapped to the correct command.
Command ring gets out of sync and commands time out.
Driver finally assumes host is unresponsive and bails out.
usb 2-4: USB disconnect, device number 10
xhci_hcd 0000:00:0d.0: ERROR mismatched command completion event
...
xhci_hcd 0000:00:0d.0: xHCI host controller not responding, assume dead
xhci_hcd 0000:00:0d.0: HC died; cleaning up
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211210141735.1384209-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci-hub.c | 1 +
drivers/usb/host/xhci-ring.c | 1 -
drivers/usb/host/xhci.c | 22 +++++++++++++++-------
3 files changed, 16 insertions(+), 8 deletions(-)
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -629,6 +629,7 @@ static int xhci_enter_test_mode(struct x
continue;
retval = xhci_disable_slot(xhci, i);
+ xhci_free_virt_device(xhci, i);
if (retval)
xhci_err(xhci, "Failed to disable slot %d, %d. Enter test mode anyway\n",
i, retval);
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1265,7 +1265,6 @@ static void xhci_handle_cmd_disable_slot
if (xhci->quirks & XHCI_EP_LIMIT_QUIRK)
/* Delete default control endpoint resources */
xhci_free_device_endpoint_resources(xhci, virt_dev, true);
- xhci_free_virt_device(xhci, slot_id);
}
static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id,
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3914,9 +3914,8 @@ static void xhci_free_dev(struct usb_hcd
del_timer_sync(&virt_dev->eps[i].stop_cmd_timer);
}
virt_dev->udev = NULL;
- ret = xhci_disable_slot(xhci, udev->slot_id);
- if (ret)
- xhci_free_virt_device(xhci, udev->slot_id);
+ xhci_disable_slot(xhci, udev->slot_id);
+ xhci_free_virt_device(xhci, udev->slot_id);
}
int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id)
@@ -3926,7 +3925,7 @@ int xhci_disable_slot(struct xhci_hcd *x
u32 state;
int ret = 0;
- command = xhci_alloc_command(xhci, false, GFP_KERNEL);
+ command = xhci_alloc_command(xhci, true, GFP_KERNEL);
if (!command)
return -ENOMEM;
@@ -3951,6 +3950,15 @@ int xhci_disable_slot(struct xhci_hcd *x
}
xhci_ring_cmd_db(xhci);
spin_unlock_irqrestore(&xhci->lock, flags);
+
+ wait_for_completion(command->completion);
+
+ if (command->status != COMP_SUCCESS)
+ xhci_warn(xhci, "Unsuccessful disable slot %u command, status %d\n",
+ slot_id, command->status);
+
+ xhci_free_command(xhci, command);
+
return ret;
}
@@ -4059,9 +4067,8 @@ int xhci_alloc_dev(struct usb_hcd *hcd,
return 1;
disable_slot:
- ret = xhci_disable_slot(xhci, udev->slot_id);
- if (ret)
- xhci_free_virt_device(xhci, udev->slot_id);
+ xhci_disable_slot(xhci, udev->slot_id);
+ xhci_free_virt_device(xhci, udev->slot_id);
return 0;
}
@@ -4191,6 +4198,7 @@ static int xhci_setup_device(struct usb_
mutex_unlock(&xhci->mutex);
ret = xhci_disable_slot(xhci, udev->slot_id);
+ xhci_free_virt_device(xhci, udev->slot_id);
if (!ret)
xhci_alloc_dev(hcd, udev);
kfree(command->completion);
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 70/88] iio: trigger: Fix reference counting
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (68 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 69/88] xhci: avoid race between disable slot command and host runtime suspend Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 71/88] iio: trigger: stm32-timer: fix MODULE_ALIAS Greg Kroah-Hartman
` (24 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lars-Peter Clausen, Nuno Sá,
Stable, Jonathan Cameron
From: Lars-Peter Clausen <lars@metafoo.de>
commit a827a4984664308f13599a0b26c77018176d0c7c upstream.
In viio_trigger_alloc() device_initialize() is used to set the initial
reference count of the trigger to 1. Then another get_device() is called on
trigger. This sets the reference count to 2 before the trigger is returned.
iio_trigger_free(), which is the matching API to viio_trigger_alloc(),
calls put_device() which decreases the reference count by 1. But the second
reference count acquired in viio_trigger_alloc() is never dropped.
As a result the iio_trigger_release() function is never called and the
memory associated with the trigger is never freed.
Since there is no reason for the trigger to start its lifetime with two
reference counts just remove the extra get_device() in
viio_trigger_alloc().
Fixes: 5f9c035cae18 ("staging:iio:triggers. Add a reference get to the core for triggers.")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20211024092700.6844-2-lars@metafoo.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/industrialio-trigger.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/iio/industrialio-trigger.c
+++ b/drivers/iio/industrialio-trigger.c
@@ -549,7 +549,6 @@ static struct iio_trigger *viio_trigger_
irq_modify_status(trig->subirq_base + i,
IRQ_NOREQUEST | IRQ_NOAUTOEN, IRQ_NOPROBE);
}
- get_device(&trig->dev);
return trig;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 71/88] iio: trigger: stm32-timer: fix MODULE_ALIAS
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (69 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 70/88] iio: trigger: Fix reference counting Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 72/88] iio: stk3310: Dont return error code in interrupt handler Greg Kroah-Hartman
` (23 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alyssa Ross, Stable, Jonathan Cameron
From: Alyssa Ross <hi@alyssa.is>
commit 893621e0606747c5bbefcaf2794d12c7aa6212b7 upstream.
modprobe can't handle spaces in aliases.
Fixes: 93fbe91b5521 ("iio: Add STM32 timer trigger driver")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Link: https://lore.kernel.org/r/20211125182850.2645424-1-hi@alyssa.is
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/trigger/stm32-timer-trigger.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/trigger/stm32-timer-trigger.c
+++ b/drivers/iio/trigger/stm32-timer-trigger.c
@@ -800,6 +800,6 @@ static struct platform_driver stm32_time
};
module_platform_driver(stm32_timer_trigger_driver);
-MODULE_ALIAS("platform: stm32-timer-trigger");
+MODULE_ALIAS("platform:stm32-timer-trigger");
MODULE_DESCRIPTION("STMicroelectronics STM32 Timer Trigger driver");
MODULE_LICENSE("GPL v2");
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 72/88] iio: stk3310: Dont return error code in interrupt handler
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (70 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 71/88] iio: trigger: stm32-timer: fix MODULE_ALIAS Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 73/88] iio: mma8452: Fix trigger reference couting Greg Kroah-Hartman
` (22 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lars-Peter Clausen, Stable, Jonathan Cameron
From: Lars-Peter Clausen <lars@metafoo.de>
commit 8e1eeca5afa7ba84d885987165dbdc5decf15413 upstream.
Interrupt handlers must return one of the irqreturn_t values. Returning a
error code is not supported.
The stk3310 event interrupt handler returns an error code when reading the
flags register fails.
Fix the implementation to always return an irqreturn_t value.
Fixes: 3dd477acbdd1 ("iio: light: Add threshold interrupt support for STK3310")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211024171251.22896-3-lars@metafoo.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/light/stk3310.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/iio/light/stk3310.c
+++ b/drivers/iio/light/stk3310.c
@@ -544,9 +544,8 @@ static irqreturn_t stk3310_irq_event_han
mutex_lock(&data->lock);
ret = regmap_field_read(data->reg_flag_nf, &dir);
if (ret < 0) {
- dev_err(&data->client->dev, "register read failed\n");
- mutex_unlock(&data->lock);
- return ret;
+ dev_err(&data->client->dev, "register read failed: %d\n", ret);
+ goto out;
}
event = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 1,
IIO_EV_TYPE_THRESH,
@@ -558,6 +557,7 @@ static irqreturn_t stk3310_irq_event_han
ret = regmap_field_write(data->reg_flag_psint, 0);
if (ret < 0)
dev_err(&data->client->dev, "failed to reset interrupts\n");
+out:
mutex_unlock(&data->lock);
return IRQ_HANDLED;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 73/88] iio: mma8452: Fix trigger reference couting
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (71 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 72/88] iio: stk3310: Dont return error code in interrupt handler Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 74/88] iio: ltr501: Dont return error code in trigger handler Greg Kroah-Hartman
` (21 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lars-Peter Clausen, Stable, Jonathan Cameron
From: Lars-Peter Clausen <lars@metafoo.de>
commit cd0082235783f814241a1c9483fb89e405f4f892 upstream.
The mma8452 driver directly assigns a trigger to the struct iio_dev. The
IIO core when done using this trigger will call `iio_trigger_put()` to drop
the reference count by 1.
Without the matching `iio_trigger_get()` in the driver the reference count
can reach 0 too early, the trigger gets freed while still in use and a
use-after-free occurs.
Fix this by getting a reference to the trigger before assigning it to the
IIO device.
Fixes: ae6d9ce05691 ("iio: mma8452: Add support for interrupt driven triggers.")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211024092700.6844-1-lars@metafoo.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/accel/mma8452.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -1473,7 +1473,7 @@ static int mma8452_trigger_setup(struct
if (ret)
return ret;
- indio_dev->trig = trig;
+ indio_dev->trig = iio_trigger_get(trig);
return 0;
}
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 74/88] iio: ltr501: Dont return error code in trigger handler
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (72 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 73/88] iio: mma8452: Fix trigger reference couting Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 75/88] iio: kxsd9: " Greg Kroah-Hartman
` (20 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lars-Peter Clausen, Stable, Jonathan Cameron
From: Lars-Peter Clausen <lars@metafoo.de>
commit ef9d67fa72c1b149a420587e435a3e888bdbf74f upstream.
IIO trigger handlers need to return one of the irqreturn_t values.
Returning an error code is not supported.
The ltr501 interrupt handler gets this right for most error paths, but
there is one case where it returns the error code.
In addition for this particular case the trigger handler does not call
`iio_trigger_notify_done()`. Which when not done keeps the triggered
disabled forever.
Modify the code so that the function returns a valid irqreturn_t value as
well as calling `iio_trigger_notify_done()` on all exit paths.
Fixes: 2690be905123 ("iio: Add Lite-On ltr501 ambient light / proximity sensor driver")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211024171251.22896-1-lars@metafoo.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/light/ltr501.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/light/ltr501.c
+++ b/drivers/iio/light/ltr501.c
@@ -1272,7 +1272,7 @@ static irqreturn_t ltr501_trigger_handle
ret = regmap_bulk_read(data->regmap, LTR501_ALS_DATA1,
(u8 *)als_buf, sizeof(als_buf));
if (ret < 0)
- return ret;
+ goto done;
if (test_bit(0, indio_dev->active_scan_mask))
scan.channels[j++] = le16_to_cpu(als_buf[1]);
if (test_bit(1, indio_dev->active_scan_mask))
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 75/88] iio: kxsd9: Dont return error code in trigger handler
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (73 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 74/88] iio: ltr501: Dont return error code in trigger handler Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 76/88] iio: itg3200: Call iio_trigger_notify_done() on error Greg Kroah-Hartman
` (19 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lars-Peter Clausen, Linus Walleij,
Stable, Jonathan Cameron
From: Lars-Peter Clausen <lars@metafoo.de>
commit 45febe0d63917ee908198c5be08511c64ee1790a upstream.
IIO trigger handlers need to return one of the irqreturn_t values.
Returning an error code is not supported.
The kxsd9 interrupt handler returns an error code if reading the data
registers fails. In addition when exiting due to an error the trigger
handler does not call `iio_trigger_notify_done()`. Which when not done
keeps the triggered disabled forever.
Modify the code so that the function returns a valid irqreturn_t value as
well as calling `iio_trigger_notify_done()` on all exit paths.
Since we can't return the error code make sure to at least log it as part
of the error message.
Fixes: 0427a106a98a ("iio: accel: kxsd9: Add triggered buffer handling")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211024171251.22896-2-lars@metafoo.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/accel/kxsd9.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/iio/accel/kxsd9.c
+++ b/drivers/iio/accel/kxsd9.c
@@ -224,14 +224,14 @@ static irqreturn_t kxsd9_trigger_handler
hw_values.chan,
sizeof(hw_values.chan));
if (ret) {
- dev_err(st->dev,
- "error reading data\n");
- return ret;
+ dev_err(st->dev, "error reading data: %d\n", ret);
+ goto out;
}
iio_push_to_buffers_with_timestamp(indio_dev,
&hw_values,
iio_get_time_ns(indio_dev));
+out:
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 76/88] iio: itg3200: Call iio_trigger_notify_done() on error
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (74 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 75/88] iio: kxsd9: " Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 77/88] iio: dln2-adc: Fix lockdep complaint Greg Kroah-Hartman
` (18 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lars-Peter Clausen, Stable, Jonathan Cameron
From: Lars-Peter Clausen <lars@metafoo.de>
commit 67fe29583e72b2103abb661bb58036e3c1f00277 upstream.
IIO trigger handlers must call iio_trigger_notify_done() when done. This
must be done even when an error occurred. Otherwise the trigger will be
seen as busy indefinitely and the trigger handler will never be called
again.
The itg3200 driver neglects to call iio_trigger_notify_done() when there is
an error reading the gyro data. Fix this by making sure that
iio_trigger_notify_done() is included in the error exit path.
Fixes: 9dbf091da080 ("iio: gyro: Add itg3200")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211101144055.13858-1-lars@metafoo.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/gyro/itg3200_buffer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/gyro/itg3200_buffer.c
+++ b/drivers/iio/gyro/itg3200_buffer.c
@@ -61,9 +61,9 @@ static irqreturn_t itg3200_trigger_handl
iio_push_to_buffers_with_timestamp(indio_dev, &scan, pf->timestamp);
+error_ret:
iio_trigger_notify_done(indio_dev->trig);
-error_ret:
return IRQ_HANDLED;
}
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 77/88] iio: dln2-adc: Fix lockdep complaint
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (75 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 76/88] iio: itg3200: Call iio_trigger_notify_done() on error Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 78/88] iio: dln2: Check return value of devm_iio_trigger_register() Greg Kroah-Hartman
` (17 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jack Andersen, Noralf Trønnes,
Stable, Jonathan Cameron
From: Noralf Trønnes <noralf@tronnes.org>
commit 59f92868176f191eefde70d284bdfc1ed76a84bc upstream.
When reading the voltage:
$ cat /sys/bus/iio/devices/iio\:device0/in_voltage0_raw
Lockdep complains:
[ 153.910616] ======================================================
[ 153.916918] WARNING: possible circular locking dependency detected
[ 153.923221] 5.14.0+ #5 Not tainted
[ 153.926692] ------------------------------------------------------
[ 153.932992] cat/717 is trying to acquire lock:
[ 153.937525] c2585358 (&indio_dev->mlock){+.+.}-{3:3}, at: iio_device_claim_direct_mode+0x28/0x44
[ 153.946541]
but task is already holding lock:
[ 153.952487] c2585860 (&dln2->mutex){+.+.}-{3:3}, at: dln2_adc_read_raw+0x94/0x2bc [dln2_adc]
[ 153.961152]
which lock already depends on the new lock.
Fix this by not calling into the iio core underneath the dln2->mutex lock.
Fixes: 7c0299e879dd ("iio: adc: Add support for DLN2 ADC")
Cc: Jack Andersen <jackoalan@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20211018113731.25723-1-noralf@tronnes.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/dln2-adc.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
--- a/drivers/iio/adc/dln2-adc.c
+++ b/drivers/iio/adc/dln2-adc.c
@@ -248,7 +248,6 @@ static int dln2_adc_set_chan_period(stru
static int dln2_adc_read(struct dln2_adc *dln2, unsigned int channel)
{
int ret, i;
- struct iio_dev *indio_dev = platform_get_drvdata(dln2->pdev);
u16 conflict;
__le16 value;
int olen = sizeof(value);
@@ -257,13 +256,9 @@ static int dln2_adc_read(struct dln2_adc
.chan = channel,
};
- ret = iio_device_claim_direct_mode(indio_dev);
- if (ret < 0)
- return ret;
-
ret = dln2_adc_set_chan_enabled(dln2, channel, true);
if (ret < 0)
- goto release_direct;
+ return ret;
ret = dln2_adc_set_port_enabled(dln2, true, &conflict);
if (ret < 0) {
@@ -300,8 +295,6 @@ disable_port:
dln2_adc_set_port_enabled(dln2, false, NULL);
disable_chan:
dln2_adc_set_chan_enabled(dln2, channel, false);
-release_direct:
- iio_device_release_direct_mode(indio_dev);
return ret;
}
@@ -337,10 +330,16 @@ static int dln2_adc_read_raw(struct iio_
switch (mask) {
case IIO_CHAN_INFO_RAW:
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret < 0)
+ return ret;
+
mutex_lock(&dln2->mutex);
ret = dln2_adc_read(dln2, chan->channel);
mutex_unlock(&dln2->mutex);
+ iio_device_release_direct_mode(indio_dev);
+
if (ret < 0)
return ret;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 78/88] iio: dln2: Check return value of devm_iio_trigger_register()
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (76 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 77/88] iio: dln2-adc: Fix lockdep complaint Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 79/88] iio: at91-sama5d2: Fix incorrect sign extension Greg Kroah-Hartman
` (16 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lars-Peter Clausen, Jonathan Cameron
From: Lars-Peter Clausen <lars@metafoo.de>
commit 90751fb9f224e0e1555b49a8aa9e68f6537e4cec upstream.
Registering a trigger can fail and the return value of
devm_iio_trigger_register() must be checked. Otherwise undefined behavior
can occur when the trigger is used.
Fixes: 7c0299e879dd ("iio: adc: Add support for DLN2 ADC")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211101133043.6974-1-lars@metafoo.de
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/dln2-adc.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/iio/adc/dln2-adc.c
+++ b/drivers/iio/adc/dln2-adc.c
@@ -665,7 +665,11 @@ static int dln2_adc_probe(struct platfor
return -ENOMEM;
}
iio_trigger_set_drvdata(dln2->trig, dln2);
- devm_iio_trigger_register(dev, dln2->trig);
+ ret = devm_iio_trigger_register(dev, dln2->trig);
+ if (ret) {
+ dev_err(dev, "failed to register trigger: %d\n", ret);
+ return ret;
+ }
iio_trigger_set_immutable(indio_dev, dln2->trig);
ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 79/88] iio: at91-sama5d2: Fix incorrect sign extension
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (77 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 78/88] iio: dln2: Check return value of devm_iio_trigger_register() Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 80/88] iio: adc: axp20x_adc: fix charging current reporting on AXP22x Greg Kroah-Hartman
` (15 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Gwendal Grignou, Eugen Hristev,
Stable, Jonathan Cameron
From: Gwendal Grignou <gwendal@chromium.org>
commit 652e7df485c6884d552085ae2c73efa6cfea3547 upstream.
Use scan_type when processing raw data which also fixes that the sign
extension was from the wrong bit.
Use channel definition as root of trust and replace constant
when reading elements directly using the raw sysfs attributes.
Fixes: 6794e23fa3fe ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211104082413.3681212-9-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/at91-sama5d2_adc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -1369,7 +1369,8 @@ static int at91_adc_read_info_raw(struct
*val = st->conversion_value;
ret = at91_adc_adjust_val_osr(st, val);
if (chan->scan_type.sign == 's')
- *val = sign_extend32(*val, 11);
+ *val = sign_extend32(*val,
+ chan->scan_type.realbits - 1);
st->conversion_done = false;
}
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 80/88] iio: adc: axp20x_adc: fix charging current reporting on AXP22x
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (78 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 79/88] iio: at91-sama5d2: Fix incorrect sign extension Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 81/88] iio: ad7768-1: Call iio_trigger_notify_done() on error Greg Kroah-Hartman
` (14 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Evgeny Boger, Chen-Yu Tsai, Stable,
Jonathan Cameron
From: Evgeny Boger <boger@wirenboard.com>
commit 92beafb76a31bdc02649eb44e93a8e4f4cfcdbe8 upstream.
Both the charging and discharging currents on AXP22x are stored as
12-bit integers, in accordance with the datasheet.
It's also confirmed by vendor BSP (axp20x_adc.c:axp22_icharge_to_mA).
The scale factor of 0.5 is never mentioned in datasheet, nor in the
vendor source code. I think it was here to compensate for
erroneous addition bit in register width.
Tested on custom A40i+AXP221s board with external ammeter as
a reference.
Fixes: 0e34d5de961d ("iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs")
Signed-off-by: Evgeny Boger <boger@wirenboard.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20211116213746.264378-1-boger@wirenboard.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/axp20x_adc.c | 18 +++---------------
1 file changed, 3 insertions(+), 15 deletions(-)
--- a/drivers/iio/adc/axp20x_adc.c
+++ b/drivers/iio/adc/axp20x_adc.c
@@ -251,19 +251,8 @@ static int axp22x_adc_raw(struct iio_dev
struct iio_chan_spec const *chan, int *val)
{
struct axp20x_adc_iio *info = iio_priv(indio_dev);
- int size;
- /*
- * N.B.: Unlike the Chinese datasheets tell, the charging current is
- * stored on 12 bits, not 13 bits. Only discharging current is on 13
- * bits.
- */
- if (chan->type == IIO_CURRENT && chan->channel == AXP22X_BATT_DISCHRG_I)
- size = 13;
- else
- size = 12;
-
- *val = axp20x_read_variable_width(info->regmap, chan->address, size);
+ *val = axp20x_read_variable_width(info->regmap, chan->address, 12);
if (*val < 0)
return *val;
@@ -386,9 +375,8 @@ static int axp22x_adc_scale(struct iio_c
return IIO_VAL_INT_PLUS_MICRO;
case IIO_CURRENT:
- *val = 0;
- *val2 = 500000;
- return IIO_VAL_INT_PLUS_MICRO;
+ *val = 1;
+ return IIO_VAL_INT;
case IIO_TEMP:
*val = 100;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 81/88] iio: ad7768-1: Call iio_trigger_notify_done() on error
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (79 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 80/88] iio: adc: axp20x_adc: fix charging current reporting on AXP22x Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 82/88] iio: accel: kxcjk-1013: Fix possible memory leak in probe and remove Greg Kroah-Hartman
` (13 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lars-Peter Clausen, Stable, Jonathan Cameron
From: Lars-Peter Clausen <lars@metafoo.de>
commit 6661146427cbbce6d1fe3dbb11ff1c487f55799a upstream.
IIO trigger handlers must call iio_trigger_notify_done() when done. This
must be done even when an error occurred. Otherwise the trigger will be
seen as busy indefinitely and the trigger handler will never be called
again.
The ad7768-1 driver neglects to call iio_trigger_notify_done() when there
is an error reading the converter data. Fix this by making sure that
iio_trigger_notify_done() is included in the error exit path.
Fixes: a5f8c7da3dbe ("iio: adc: Add AD7768-1 ADC basic support")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211101144055.13858-2-lars@metafoo.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/ad7768-1.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/adc/ad7768-1.c
+++ b/drivers/iio/adc/ad7768-1.c
@@ -470,8 +470,8 @@ static irqreturn_t ad7768_trigger_handle
iio_push_to_buffers_with_timestamp(indio_dev, &st->data.scan,
iio_get_time_ns(indio_dev));
- iio_trigger_notify_done(indio_dev->trig);
err_unlock:
+ iio_trigger_notify_done(indio_dev->trig);
mutex_unlock(&st->lock);
return IRQ_HANDLED;
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 82/88] iio: accel: kxcjk-1013: Fix possible memory leak in probe and remove
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (80 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 81/88] iio: ad7768-1: Call iio_trigger_notify_done() on error Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 83/88] irqchip/armada-370-xp: Fix return value of armada_370_xp_msi_alloc() Greg Kroah-Hartman
` (12 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Yang Yingliang, Stable,
Hans de Goede, Jonathan Cameron
From: Yang Yingliang <yangyingliang@huawei.com>
commit 70c9774e180d151abaab358108e3510a8e615215 upstream.
When ACPI type is ACPI_SMO8500, the data->dready_trig will not be set, the
memory allocated by iio_triggered_buffer_setup() will not be freed, and cause
memory leak as follows:
unreferenced object 0xffff888009551400 (size 512):
comm "i2c-SMO8500-125", pid 911, jiffies 4294911787 (age 83.852s)
hex dump (first 32 bytes):
02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 20 e2 e5 c0 ff ff ff ff ........ .......
backtrace:
[<0000000041ce75ee>] kmem_cache_alloc_trace+0x16d/0x360
[<000000000aeb17b0>] iio_kfifo_allocate+0x41/0x130 [kfifo_buf]
[<000000004b40c1f5>] iio_triggered_buffer_setup_ext+0x2c/0x210 [industrialio_triggered_buffer]
[<000000004375b15f>] kxcjk1013_probe+0x10c3/0x1d81 [kxcjk_1013]
Fix it by remove data->dready_trig condition in probe and remove.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: a25691c1f967 ("iio: accel: kxcjk1013: allow using an external trigger")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: <Stable@vger.kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211025124159.2700301-1-yangyingliang@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/accel/kxcjk-1013.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -1415,8 +1415,7 @@ static int kxcjk1013_probe(struct i2c_cl
return 0;
err_buffer_cleanup:
- if (data->dready_trig)
- iio_triggered_buffer_cleanup(indio_dev);
+ iio_triggered_buffer_cleanup(indio_dev);
err_trigger_unregister:
if (data->dready_trig)
iio_trigger_unregister(data->dready_trig);
@@ -1439,8 +1438,8 @@ static int kxcjk1013_remove(struct i2c_c
pm_runtime_set_suspended(&client->dev);
pm_runtime_put_noidle(&client->dev);
+ iio_triggered_buffer_cleanup(indio_dev);
if (data->dready_trig) {
- iio_triggered_buffer_cleanup(indio_dev);
iio_trigger_unregister(data->dready_trig);
iio_trigger_unregister(data->motion_trig);
}
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 83/88] irqchip/armada-370-xp: Fix return value of armada_370_xp_msi_alloc()
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (81 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 82/88] iio: accel: kxcjk-1013: Fix possible memory leak in probe and remove Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 84/88] irqchip/armada-370-xp: Fix support for Multi-MSI interrupts Greg Kroah-Hartman
` (11 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pali Rohár, Marc Zyngier
From: Pali Rohár <pali@kernel.org>
commit ce20eff57361e72878a772ef08b5239d3ae102b6 upstream.
IRQ domain alloc function should return zero on success. Non-zero value
indicates failure.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: fcc392d501bd ("irqchip/armada-370-xp: Use the generic MSI infrastructure")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211125130057.26705-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/irqchip/irq-armada-370-xp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -250,7 +250,7 @@ static int armada_370_xp_msi_alloc(struc
NULL, NULL);
}
- return hwirq;
+ return 0;
}
static void armada_370_xp_msi_free(struct irq_domain *domain,
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 84/88] irqchip/armada-370-xp: Fix support for Multi-MSI interrupts
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (82 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 83/88] irqchip/armada-370-xp: Fix return value of armada_370_xp_msi_alloc() Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 85/88] irqchip/irq-gic-v3-its.c: Force synchronisation when issuing INVALL Greg Kroah-Hartman
` (10 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pali Rohár, Marc Zyngier
From: Pali Rohár <pali@kernel.org>
commit d0a553502efd545c1ce3fd08fc4d423f8e4ac3d6 upstream.
irq-armada-370-xp driver already sets MSI_FLAG_MULTI_PCI_MSI flag into
msi_domain_info structure. But allocated interrupt numbers for Multi-MSI
needs to be properly aligned otherwise devices send MSI interrupt with
wrong number.
Fix this issue by using function bitmap_find_free_region() instead of
bitmap_find_next_zero_area() to allocate aligned interrupt numbers.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: a71b9412c90c ("irqchip/armada-370-xp: Allow allocation of multiple MSIs")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211125130057.26705-2-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/irqchip/irq-armada-370-xp.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -232,16 +232,12 @@ static int armada_370_xp_msi_alloc(struc
int hwirq, i;
mutex_lock(&msi_used_lock);
+ hwirq = bitmap_find_free_region(msi_used, PCI_MSI_DOORBELL_NR,
+ order_base_2(nr_irqs));
+ mutex_unlock(&msi_used_lock);
- hwirq = bitmap_find_next_zero_area(msi_used, PCI_MSI_DOORBELL_NR,
- 0, nr_irqs, 0);
- if (hwirq >= PCI_MSI_DOORBELL_NR) {
- mutex_unlock(&msi_used_lock);
+ if (hwirq < 0)
return -ENOSPC;
- }
-
- bitmap_set(msi_used, hwirq, nr_irqs);
- mutex_unlock(&msi_used_lock);
for (i = 0; i < nr_irqs; i++) {
irq_domain_set_info(domain, virq + i, hwirq + i,
@@ -259,7 +255,7 @@ static void armada_370_xp_msi_free(struc
struct irq_data *d = irq_domain_get_irq_data(domain, virq);
mutex_lock(&msi_used_lock);
- bitmap_clear(msi_used, d->hwirq, nr_irqs);
+ bitmap_release_region(msi_used, d->hwirq, order_base_2(nr_irqs));
mutex_unlock(&msi_used_lock);
}
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 85/88] irqchip/irq-gic-v3-its.c: Force synchronisation when issuing INVALL
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (83 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 84/88] irqchip/armada-370-xp: Fix support for Multi-MSI interrupts Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 86/88] irqchip: nvic: Fix offset for Interrupt Priority Offsets Greg Kroah-Hartman
` (9 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Wudi Wang, Shaokun Zhang, Marc Zyngier
From: Wudi Wang <wangwudi@hisilicon.com>
commit b383a42ca523ce54bcbd63f7c8f3cf974abc9b9a upstream.
INVALL CMD specifies that the ITS must ensure any caching associated with
the interrupt collection defined by ICID is consistent with the LPI
configuration tables held in memory for all Redistributors. SYNC is
required to ensure that INVALL is executed.
Currently, LPI configuration data may be inconsistent with that in the
memory within a short period of time after the INVALL command is executed.
Signed-off-by: Wudi Wang <wangwudi@hisilicon.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: cc2d3216f53c ("irqchip: GICv3: ITS command queue")
Link: https://lore.kernel.org/r/20211208015429.5007-1-zhangshaokun@hisilicon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/irqchip/irq-gic-v3-its.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -574,7 +574,7 @@ static struct its_collection *its_build_
its_fixup_cmd(cmd);
- return NULL;
+ return desc->its_invall_cmd.col;
}
static struct its_vpe *its_build_vinvall_cmd(struct its_node *its,
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 86/88] irqchip: nvic: Fix offset for Interrupt Priority Offsets
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (84 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 85/88] irqchip/irq-gic-v3-its.c: Force synchronisation when issuing INVALL Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 87/88] misc: fastrpc: fix improper packet size calculation Greg Kroah-Hartman
` (8 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Vladimir Murzin, Marc Zyngier
From: Vladimir Murzin <vladimir.murzin@arm.com>
commit c5e0cbe2858d278a27d5b3fe31890aea5be064c4 upstream.
According to ARM(v7M) ARM Interrupt Priority Offsets located at
0xE000E400-0xE000E5EC, while 0xE000E300-0xE000E33C covers read-only
Interrupt Active Bit Registers
Fixes: 292ec080491d ("irqchip: Add support for ARMv7-M NVIC")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211201110259.84857-1-vladimir.murzin@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/irqchip/irq-nvic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/irqchip/irq-nvic.c
+++ b/drivers/irqchip/irq-nvic.c
@@ -26,7 +26,7 @@
#define NVIC_ISER 0x000
#define NVIC_ICER 0x080
-#define NVIC_IPR 0x300
+#define NVIC_IPR 0x400
#define NVIC_MAX_BANKS 16
/*
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 87/88] misc: fastrpc: fix improper packet size calculation
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (85 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 86/88] irqchip: nvic: Fix offset for Interrupt Priority Offsets Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 9:30 ` [PATCH 5.4 88/88] bpf: Add selftests to cover packet access corner cases Greg Kroah-Hartman
` (7 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Srinivas Kandagatla, Jeya R
From: Jeya R <jeyr@codeaurora.org>
commit 3a1bf591e9a410f220b7405a142a47407394a1d5 upstream.
The buffer list is sorted and this is not being considered while
calculating packet size. This would lead to improper copy length
calculation for non-dmaheap buffers which would eventually cause
sending improper buffers to DSP.
Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method")
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Jeya R <jeyr@codeaurora.org>
Link: https://lore.kernel.org/r/1637771481-4299-1-git-send-email-jeyr@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/misc/fastrpc.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/misc/fastrpc.c
+++ b/drivers/misc/fastrpc.c
@@ -693,16 +693,18 @@ static int fastrpc_get_meta_size(struct
static u64 fastrpc_get_payload_size(struct fastrpc_invoke_ctx *ctx, int metalen)
{
u64 size = 0;
- int i;
+ int oix;
size = ALIGN(metalen, FASTRPC_ALIGN);
- for (i = 0; i < ctx->nscalars; i++) {
+ for (oix = 0; oix < ctx->nbufs; oix++) {
+ int i = ctx->olaps[oix].raix;
+
if (ctx->args[i].fd == 0 || ctx->args[i].fd == -1) {
- if (ctx->olaps[i].offset == 0)
+ if (ctx->olaps[oix].offset == 0)
size = ALIGN(size, FASTRPC_ALIGN);
- size += (ctx->olaps[i].mend - ctx->olaps[i].mstart);
+ size += (ctx->olaps[oix].mend - ctx->olaps[oix].mstart);
}
}
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH 5.4 88/88] bpf: Add selftests to cover packet access corner cases
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (86 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 87/88] misc: fastrpc: fix improper packet size calculation Greg Kroah-Hartman
@ 2021-12-13 9:30 ` Greg Kroah-Hartman
2021-12-13 14:43 ` [PATCH 5.4 00/88] 5.4.165-rc1 review Jon Hunter
` (6 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-13 9:30 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maxim Mikityanskiy, Daniel Borkmann
From: Maxim Mikityanskiy <maximmi@nvidia.com>
commit b560b21f71eb4ef9dfc7c8ec1d0e4d7f9aa54b51 upstream.
This commit adds BPF verifier selftests that cover all corner cases by
packet boundary checks. Specifically, 8-byte packet reads are tested at
the beginning of data and at the beginning of data_meta, using all kinds
of boundary checks (all comparison operators: <, >, <=, >=; both
permutations of operands: data + length compared to end, end compared to
data + length). For each case there are three tests:
1. Length is just enough for an 8-byte read. Length is either 7 or 8,
depending on the comparison.
2. Length is increased by 1 - should still pass the verifier. These
cases are useful, because they failed before commit 2fa7d94afc1a
("bpf: Fix the off-by-two error in range markings").
3. Length is decreased by 1 - should be rejected by the verifier.
Some existing tests are just renamed to avoid duplication.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211207081521.41923-1-maximmi@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/bpf/verifier/xdp_direct_packet_access.c | 600 +++++++++-
1 file changed, 584 insertions(+), 16 deletions(-)
--- a/tools/testing/selftests/bpf/verifier/xdp_direct_packet_access.c
+++ b/tools/testing/selftests/bpf/verifier/xdp_direct_packet_access.c
@@ -35,7 +35,7 @@
.prog_type = BPF_PROG_TYPE_XDP,
},
{
- "XDP pkt read, pkt_data' > pkt_end, good access",
+ "XDP pkt read, pkt_data' > pkt_end, corner case, good access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
@@ -88,6 +88,41 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
+ "XDP pkt read, pkt_data' > pkt_end, corner case +1, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+ offsetof(struct xdp_md, data_end)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 9),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_3, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -9),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_data' > pkt_end, corner case -1, bad access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+ offsetof(struct xdp_md, data_end)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 7),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_3, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -7),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R1 offset is outside of the packet",
+ .result = REJECT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
"XDP pkt read, pkt_end > pkt_data', good access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
@@ -106,7 +141,7 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
- "XDP pkt read, pkt_end > pkt_data', bad access 1",
+ "XDP pkt read, pkt_end > pkt_data', corner case -1, bad access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
@@ -143,6 +178,42 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
+ "XDP pkt read, pkt_end > pkt_data', corner case, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+ offsetof(struct xdp_md, data_end)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 7),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_3, BPF_REG_1, 1),
+ BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -7),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_end > pkt_data', corner case +1, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+ offsetof(struct xdp_md, data_end)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_3, BPF_REG_1, 1),
+ BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
"XDP pkt read, pkt_data' < pkt_end, good access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
@@ -161,7 +232,7 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
- "XDP pkt read, pkt_data' < pkt_end, bad access 1",
+ "XDP pkt read, pkt_data' < pkt_end, corner case -1, bad access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
@@ -198,7 +269,43 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
- "XDP pkt read, pkt_end < pkt_data', good access",
+ "XDP pkt read, pkt_data' < pkt_end, corner case, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+ offsetof(struct xdp_md, data_end)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 7),
+ BPF_JMP_REG(BPF_JLT, BPF_REG_1, BPF_REG_3, 1),
+ BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -7),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_data' < pkt_end, corner case +1, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+ offsetof(struct xdp_md, data_end)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+ BPF_JMP_REG(BPF_JLT, BPF_REG_1, BPF_REG_3, 1),
+ BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_end < pkt_data', corner case, good access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
@@ -251,6 +358,41 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
+ "XDP pkt read, pkt_end < pkt_data', corner case +1, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+ offsetof(struct xdp_md, data_end)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 9),
+ BPF_JMP_REG(BPF_JLT, BPF_REG_3, BPF_REG_1, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -9),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_end < pkt_data', corner case -1, bad access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+ offsetof(struct xdp_md, data_end)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 7),
+ BPF_JMP_REG(BPF_JLT, BPF_REG_3, BPF_REG_1, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -7),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R1 offset is outside of the packet",
+ .result = REJECT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
"XDP pkt read, pkt_data' >= pkt_end, good access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
@@ -268,7 +410,7 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
- "XDP pkt read, pkt_data' >= pkt_end, bad access 1",
+ "XDP pkt read, pkt_data' >= pkt_end, corner case -1, bad access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
@@ -304,7 +446,41 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
- "XDP pkt read, pkt_end >= pkt_data', good access",
+ "XDP pkt read, pkt_data' >= pkt_end, corner case, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+ offsetof(struct xdp_md, data_end)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 7),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_1, BPF_REG_3, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -7),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_data' >= pkt_end, corner case +1, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+ offsetof(struct xdp_md, data_end)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_1, BPF_REG_3, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_end >= pkt_data', corner case, good access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
@@ -359,7 +535,44 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
- "XDP pkt read, pkt_data' <= pkt_end, good access",
+ "XDP pkt read, pkt_end >= pkt_data', corner case +1, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+ offsetof(struct xdp_md, data_end)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 9),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_3, BPF_REG_1, 1),
+ BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -9),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_end >= pkt_data', corner case -1, bad access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+ offsetof(struct xdp_md, data_end)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 7),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_3, BPF_REG_1, 1),
+ BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -7),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R1 offset is outside of the packet",
+ .result = REJECT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_data' <= pkt_end, corner case, good access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
@@ -414,6 +627,43 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
+ "XDP pkt read, pkt_data' <= pkt_end, corner case +1, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+ offsetof(struct xdp_md, data_end)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 9),
+ BPF_JMP_REG(BPF_JLE, BPF_REG_1, BPF_REG_3, 1),
+ BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -9),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_data' <= pkt_end, corner case -1, bad access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+ offsetof(struct xdp_md, data_end)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 7),
+ BPF_JMP_REG(BPF_JLE, BPF_REG_1, BPF_REG_3, 1),
+ BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -7),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R1 offset is outside of the packet",
+ .result = REJECT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
"XDP pkt read, pkt_end <= pkt_data', good access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
@@ -431,7 +681,7 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
- "XDP pkt read, pkt_end <= pkt_data', bad access 1",
+ "XDP pkt read, pkt_end <= pkt_data', corner case -1, bad access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
@@ -467,7 +717,41 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
- "XDP pkt read, pkt_meta' > pkt_data, good access",
+ "XDP pkt read, pkt_end <= pkt_data', corner case, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+ offsetof(struct xdp_md, data_end)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 7),
+ BPF_JMP_REG(BPF_JLE, BPF_REG_3, BPF_REG_1, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -7),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_end <= pkt_data', corner case +1, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1,
+ offsetof(struct xdp_md, data_end)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+ BPF_JMP_REG(BPF_JLE, BPF_REG_3, BPF_REG_1, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_meta' > pkt_data, corner case, good access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
offsetof(struct xdp_md, data_meta)),
@@ -520,6 +804,41 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
+ "XDP pkt read, pkt_meta' > pkt_data, corner case +1, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+ offsetof(struct xdp_md, data_meta)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 9),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_3, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -9),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_meta' > pkt_data, corner case -1, bad access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+ offsetof(struct xdp_md, data_meta)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 7),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_3, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -7),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R1 offset is outside of the packet",
+ .result = REJECT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
"XDP pkt read, pkt_data > pkt_meta', good access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
@@ -538,7 +857,7 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
- "XDP pkt read, pkt_data > pkt_meta', bad access 1",
+ "XDP pkt read, pkt_data > pkt_meta', corner case -1, bad access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
offsetof(struct xdp_md, data_meta)),
@@ -575,6 +894,42 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
+ "XDP pkt read, pkt_data > pkt_meta', corner case, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+ offsetof(struct xdp_md, data_meta)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 7),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_3, BPF_REG_1, 1),
+ BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -7),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_data > pkt_meta', corner case +1, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+ offsetof(struct xdp_md, data_meta)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_3, BPF_REG_1, 1),
+ BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
"XDP pkt read, pkt_meta' < pkt_data, good access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
@@ -593,7 +948,7 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
- "XDP pkt read, pkt_meta' < pkt_data, bad access 1",
+ "XDP pkt read, pkt_meta' < pkt_data, corner case -1, bad access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
offsetof(struct xdp_md, data_meta)),
@@ -630,7 +985,43 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
- "XDP pkt read, pkt_data < pkt_meta', good access",
+ "XDP pkt read, pkt_meta' < pkt_data, corner case, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+ offsetof(struct xdp_md, data_meta)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 7),
+ BPF_JMP_REG(BPF_JLT, BPF_REG_1, BPF_REG_3, 1),
+ BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -7),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_meta' < pkt_data, corner case +1, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+ offsetof(struct xdp_md, data_meta)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+ BPF_JMP_REG(BPF_JLT, BPF_REG_1, BPF_REG_3, 1),
+ BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_data < pkt_meta', corner case, good access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
offsetof(struct xdp_md, data_meta)),
@@ -683,6 +1074,41 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
+ "XDP pkt read, pkt_data < pkt_meta', corner case +1, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+ offsetof(struct xdp_md, data_meta)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 9),
+ BPF_JMP_REG(BPF_JLT, BPF_REG_3, BPF_REG_1, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -9),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_data < pkt_meta', corner case -1, bad access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+ offsetof(struct xdp_md, data_meta)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 7),
+ BPF_JMP_REG(BPF_JLT, BPF_REG_3, BPF_REG_1, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -7),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R1 offset is outside of the packet",
+ .result = REJECT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
"XDP pkt read, pkt_meta' >= pkt_data, good access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
@@ -700,7 +1126,7 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
- "XDP pkt read, pkt_meta' >= pkt_data, bad access 1",
+ "XDP pkt read, pkt_meta' >= pkt_data, corner case -1, bad access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
offsetof(struct xdp_md, data_meta)),
@@ -736,7 +1162,41 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
- "XDP pkt read, pkt_data >= pkt_meta', good access",
+ "XDP pkt read, pkt_meta' >= pkt_data, corner case, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+ offsetof(struct xdp_md, data_meta)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 7),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_1, BPF_REG_3, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -7),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_meta' >= pkt_data, corner case +1, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+ offsetof(struct xdp_md, data_meta)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_1, BPF_REG_3, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_data >= pkt_meta', corner case, good access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
offsetof(struct xdp_md, data_meta)),
@@ -791,7 +1251,44 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
- "XDP pkt read, pkt_meta' <= pkt_data, good access",
+ "XDP pkt read, pkt_data >= pkt_meta', corner case +1, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+ offsetof(struct xdp_md, data_meta)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 9),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_3, BPF_REG_1, 1),
+ BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -9),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_data >= pkt_meta', corner case -1, bad access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+ offsetof(struct xdp_md, data_meta)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 7),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_3, BPF_REG_1, 1),
+ BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -7),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R1 offset is outside of the packet",
+ .result = REJECT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_meta' <= pkt_data, corner case, good access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
offsetof(struct xdp_md, data_meta)),
@@ -846,6 +1343,43 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
+ "XDP pkt read, pkt_meta' <= pkt_data, corner case +1, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+ offsetof(struct xdp_md, data_meta)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 9),
+ BPF_JMP_REG(BPF_JLE, BPF_REG_1, BPF_REG_3, 1),
+ BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -9),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_meta' <= pkt_data, corner case -1, bad access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+ offsetof(struct xdp_md, data_meta)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 7),
+ BPF_JMP_REG(BPF_JLE, BPF_REG_1, BPF_REG_3, 1),
+ BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -7),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R1 offset is outside of the packet",
+ .result = REJECT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
"XDP pkt read, pkt_data <= pkt_meta', good access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
@@ -863,7 +1397,7 @@
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
- "XDP pkt read, pkt_data <= pkt_meta', bad access 1",
+ "XDP pkt read, pkt_data <= pkt_meta', corner case -1, bad access",
.insns = {
BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
offsetof(struct xdp_md, data_meta)),
@@ -898,3 +1432,37 @@
.prog_type = BPF_PROG_TYPE_XDP,
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
+{
+ "XDP pkt read, pkt_data <= pkt_meta', corner case, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+ offsetof(struct xdp_md, data_meta)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 7),
+ BPF_JMP_REG(BPF_JLE, BPF_REG_3, BPF_REG_1, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -7),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
+{
+ "XDP pkt read, pkt_data <= pkt_meta', corner case +1, good access",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1,
+ offsetof(struct xdp_md, data_meta)),
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data)),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
+ BPF_JMP_REG(BPF_JLE, BPF_REG_3, BPF_REG_1, 1),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ .prog_type = BPF_PROG_TYPE_XDP,
+ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
+},
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: [PATCH 5.4 00/88] 5.4.165-rc1 review
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (87 preceding siblings ...)
2021-12-13 9:30 ` [PATCH 5.4 88/88] bpf: Add selftests to cover packet access corner cases Greg Kroah-Hartman
@ 2021-12-13 14:43 ` Jon Hunter
2021-12-13 19:55 ` Guenter Roeck
` (5 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Jon Hunter @ 2021-12-13 14:43 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, stable, linux-tegra
On Mon, 13 Dec 2021 10:29:30 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.165 release.
> There are 88 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 15 Dec 2021 09:29:16 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.165-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests passing for Tegra ...
Test results for stable-v5.4:
10 builds: 10 pass, 0 fail
26 boots: 26 pass, 0 fail
59 tests: 59 pass, 0 fail
Linux version: 5.4.165-rc1-g0896ccf90364
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra210-p3450-0000,
tegra30-cardhu-a04
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Jon
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: [PATCH 5.4 00/88] 5.4.165-rc1 review
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (88 preceding siblings ...)
2021-12-13 14:43 ` [PATCH 5.4 00/88] 5.4.165-rc1 review Jon Hunter
@ 2021-12-13 19:55 ` Guenter Roeck
2021-12-13 20:24 ` Florian Fainelli
` (4 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Guenter Roeck @ 2021-12-13 19:55 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, shuah, patches, lkft-triage, pavel,
jonathanh, f.fainelli, stable
On Mon, Dec 13, 2021 at 10:29:30AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.165 release.
> There are 88 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 15 Dec 2021 09:29:16 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 157 pass: 157 fail: 0
Qemu test results:
total: 444 pass: 444 fail: 0
Tested-by: Guenter Roeck <linux@roeck-us.net>
Guenter
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: [PATCH 5.4 00/88] 5.4.165-rc1 review
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (89 preceding siblings ...)
2021-12-13 19:55 ` Guenter Roeck
@ 2021-12-13 20:24 ` Florian Fainelli
2021-12-13 20:28 ` Shuah Khan
` (3 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Florian Fainelli @ 2021-12-13 20:24 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah, patches, lkft-triage, pavel,
jonathanh, stable
On 12/13/21 1:29 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.165 release.
> There are 88 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 15 Dec 2021 09:29:16 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.165-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
--
Florian
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: [PATCH 5.4 00/88] 5.4.165-rc1 review
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (90 preceding siblings ...)
2021-12-13 20:24 ` Florian Fainelli
@ 2021-12-13 20:28 ` Shuah Khan
2021-12-14 12:29 ` Naresh Kamboju
` (2 subsequent siblings)
94 siblings, 0 replies; 96+ messages in thread
From: Shuah Khan @ 2021-12-13 20:28 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah, patches, lkft-triage, pavel,
jonathanh, f.fainelli, stable, Shuah Khan
On 12/13/21 2:29 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.165 release.
> There are 88 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 15 Dec 2021 09:29:16 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.165-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: [PATCH 5.4 00/88] 5.4.165-rc1 review
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (91 preceding siblings ...)
2021-12-13 20:28 ` Shuah Khan
@ 2021-12-14 12:29 ` Naresh Kamboju
2021-12-14 12:41 ` Sudip Mukherjee
2021-12-15 0:50 ` Samuel Zou
94 siblings, 0 replies; 96+ messages in thread
From: Naresh Kamboju @ 2021-12-14 12:29 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, shuah, f.fainelli, patches, lkft-triage, jonathanh,
stable, pavel, akpm, torvalds, linux
On Mon, 13 Dec 2021 at 15:13, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.165 release.
> There are 88 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 15 Dec 2021 09:29:16 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.165-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
## Build
* kernel: 5.4.165-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.4.y
* git commit: 0896ccf9036401df1f284b0a02b954d71d071d74
* git describe: v5.4.164-89-g0896ccf90364
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.164-89-g0896ccf90364
## No Test Regressions (compared to v5.4.163-71-g9be61260aa6e)
## No Test Fixes (compared to v5.4.163-71-g9be61260aa6e)
## Test result summary
total: 94642, pass: 78861, fail: 782, skip: 13447, xfail: 1552
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 258 total, 254 passed, 4 failed
* arm64: 36 total, 31 passed, 5 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 20 total, 20 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 34 total, 34 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 52 total, 48 passed, 4 failed
* riscv: 24 total, 24 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 36 total, 36 passed, 0 failed
## Test suites summary
* fwts
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: [PATCH 5.4 00/88] 5.4.165-rc1 review
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (92 preceding siblings ...)
2021-12-14 12:29 ` Naresh Kamboju
@ 2021-12-14 12:41 ` Sudip Mukherjee
2021-12-15 0:50 ` Samuel Zou
94 siblings, 0 replies; 96+ messages in thread
From: Sudip Mukherjee @ 2021-12-14 12:41 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, linux, shuah, patches, lkft-triage,
pavel, jonathanh, f.fainelli, stable
Hi Greg,
On Mon, Dec 13, 2021 at 10:29:30AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.165 release.
> There are 88 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 15 Dec 2021 09:29:16 +0000.
> Anything received after that time might be too late.
Build test:
mips (gcc version 11.2.1 20211112): 65 configs -> no new failure
arm (gcc version 11.2.1 20211112): 107 configs -> no new failure
arm64 (gcc version 11.2.1 20211112): 2 configs -> no failure
x86_64 (gcc version 11.2.1 20211112): 4 configs -> no failure
Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
[1]. https://openqa.qa.codethink.co.uk/tests/504
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
--
Regards
Sudip
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: [PATCH 5.4 00/88] 5.4.165-rc1 review
2021-12-13 9:29 [PATCH 5.4 00/88] 5.4.165-rc1 review Greg Kroah-Hartman
` (93 preceding siblings ...)
2021-12-14 12:41 ` Sudip Mukherjee
@ 2021-12-15 0:50 ` Samuel Zou
94 siblings, 0 replies; 96+ messages in thread
From: Samuel Zou @ 2021-12-15 0:50 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah, patches, lkft-triage, pavel,
jonathanh, f.fainelli, stable
On 2021/12/13 17:29, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.165 release.
> There are 88 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 15 Dec 2021 09:29:16 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.165-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on arm64 and x86 for 5.4.165-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.4.y
Version: 5.4.165-rc1
Commit: 0896ccf9036401df1f284b0a02b954d71d071d74
Compiler: gcc version 7.3.0 (GCC)
arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9013
passed: 9013
failed: 0
timeout: 0
--------------------------------------------------------------------
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9013
passed: 9013
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <hulkrobot@huawei.com>
^ permalink raw reply [flat|nested] 96+ messages in thread