[PATCH AUTOSEL 5.10 001/116] Bluetooth: Fix debugfs entry leak in hci_register_dev()

[PATCH AUTOSEL 5.10 001/116] Bluetooth: Fix debugfs entry leak in hci_register_dev()

[Sasha Levin]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 5a4bb6a8e981d3d0d492aa38412ee80b21033177 ]

Fault injection test report debugfs entry leak as follows:

debugfs: Directory 'hci0' with parent 'bluetooth' already present!

When register_pm_notifier() failed in hci_register_dev(), the debugfs
create by debugfs_create_dir() do not removed in the error handing path.

Add the remove debugfs code to fix it.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 2ad66f64879f1..2e7998bad133b 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3810,6 +3810,7 @@ int hci_register_dev(struct hci_dev *hdev)
 	return id;
 
 err_wqueue:
+	debugfs_remove_recursive(hdev->debugfs);
 	destroy_workqueue(hdev->workqueue);
 	destroy_workqueue(hdev->req_workqueue);
 err:
-- 
2.34.1

[PATCH AUTOSEL 5.10 002/116] fs: dlm: filter user dlm messages for kernel locks

[Sasha Levin]

From: Alexander Aring <aahringo@redhat.com>

[ Upstream commit 6c2e3bf68f3e5e5a647aa52be246d5f552d7496d ]

This patch fixes the following crash by receiving a invalid message:

[  160.672220] ==================================================================
[  160.676206] BUG: KASAN: user-memory-access in dlm_user_add_ast+0xc3/0x370
[  160.679659] Read of size 8 at addr 00000000deadbeef by task kworker/u32:13/319
[  160.681447]
[  160.681824] CPU: 10 PID: 319 Comm: kworker/u32:13 Not tainted 5.14.0-rc2+ #399
[  160.683472] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.14.0-1.module+el8.6.0+12648+6ede71a5 04/01/2014
[  160.685574] Workqueue: dlm_recv process_recv_sockets
[  160.686721] Call Trace:
[  160.687310]  dump_stack_lvl+0x56/0x6f
[  160.688169]  ? dlm_user_add_ast+0xc3/0x370
[  160.689116]  kasan_report.cold.14+0x116/0x11b
[  160.690138]  ? dlm_user_add_ast+0xc3/0x370
[  160.690832]  dlm_user_add_ast+0xc3/0x370
[  160.691502]  _receive_unlock_reply+0x103/0x170
[  160.692241]  _receive_message+0x11df/0x1ec0
[  160.692926]  ? rcu_read_lock_sched_held+0xa1/0xd0
[  160.693700]  ? rcu_read_lock_bh_held+0xb0/0xb0
[  160.694427]  ? lock_acquire+0x175/0x400
[  160.695058]  ? do_purge.isra.51+0x200/0x200
[  160.695744]  ? lock_acquired+0x360/0x5d0
[  160.696400]  ? lock_contended+0x6a0/0x6a0
[  160.697055]  ? lock_release+0x21d/0x5e0
[  160.697686]  ? lock_is_held_type+0xe0/0x110
[  160.698352]  ? lock_is_held_type+0xe0/0x110
[  160.699026]  ? ___might_sleep+0x1cc/0x1e0
[  160.699698]  ? dlm_wait_requestqueue+0x94/0x140
[  160.700451]  ? dlm_process_requestqueue+0x240/0x240
[  160.701249]  ? down_write_killable+0x2b0/0x2b0
[  160.701988]  ? do_raw_spin_unlock+0xa2/0x130
[  160.702690]  dlm_receive_buffer+0x1a5/0x210
[  160.703385]  dlm_process_incoming_buffer+0x726/0x9f0
[  160.704210]  receive_from_sock+0x1c0/0x3b0
[  160.704886]  ? dlm_tcp_shutdown+0x30/0x30
[  160.705561]  ? lock_acquire+0x175/0x400
[  160.706197]  ? rcu_read_lock_sched_held+0xa1/0xd0
[  160.706941]  ? rcu_read_lock_bh_held+0xb0/0xb0
[  160.707681]  process_recv_sockets+0x32/0x40
[  160.708366]  process_one_work+0x55e/0xad0
[  160.709045]  ? pwq_dec_nr_in_flight+0x110/0x110
[  160.709820]  worker_thread+0x65/0x5e0
[  160.710423]  ? process_one_work+0xad0/0xad0
[  160.711087]  kthread+0x1ed/0x220
[  160.711628]  ? set_kthread_struct+0x80/0x80
[  160.712314]  ret_from_fork+0x22/0x30

The issue is that we received a DLM message for a user lock but the
destination lock is a kernel lock. Note that the address which is trying
to derefence is 00000000deadbeef, which is in a kernel lock
lkb->lkb_astparam, this field should never be derefenced by the DLM
kernel stack. In case of a user lock lkb->lkb_astparam is lkb->lkb_ua
(memory is shared by a union field). The struct lkb_ua will be handled
by the DLM kernel stack but on a kernel lock it will contain invalid
data and ends in most likely crashing the kernel.

It can be reproduced with two cluster nodes.

node 2:
dlm_tool join test
echo "862 fooobaar 1 2 1" > /sys/kernel/debug/dlm/test_locks
echo "862 3 1" > /sys/kernel/debug/dlm/test_waiters

node 1:
dlm_tool join test

python:
foo = DLM(h_cmd=3, o_nextcmd=1, h_nodeid=1, h_lockspace=0x77222027, \
          m_type=7, m_flags=0x1, m_remid=0x862, m_result=0xFFFEFFFE)
newFile = open("/sys/kernel/debug/dlm/comms/2/rawmsg", "wb")
newFile.write(bytes(foo))

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/dlm/lock.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/fs/dlm/lock.c b/fs/dlm/lock.c
index 002123efc6b05..1e9d8999b9390 100644
--- a/fs/dlm/lock.c
+++ b/fs/dlm/lock.c
@@ -3975,6 +3975,14 @@ static int validate_message(struct dlm_lkb *lkb, struct dlm_message *ms)
 	int from = ms->m_header.h_nodeid;
 	int error = 0;
 
+	/* currently mixing of user/kernel locks are not supported */
+	if (ms->m_flags & DLM_IFL_USER && ~lkb->lkb_flags & DLM_IFL_USER) {
+		log_error(lkb->lkb_resource->res_ls,
+			  "got user dlm message for a kernel lock");
+		error = -EINVAL;
+		goto out;
+	}
+
 	switch (ms->m_type) {
 	case DLM_MSG_CONVERT:
 	case DLM_MSG_UNLOCK:
@@ -4003,6 +4011,7 @@ static int validate_message(struct dlm_lkb *lkb, struct dlm_message *ms)
 		error = -EINVAL;
 	}
 
+out:
 	if (error)
 		log_error(lkb->lkb_resource->res_ls,
 			  "ignore invalid message %d from %d %x %x %x %d",
-- 
2.34.1

[PATCH AUTOSEL 5.10 003/116] libbpf: Validate that .BTF and .BTF.ext sections contain data

[Sasha Levin]

From: Andrii Nakryiko <andrii@kernel.org>

[ Upstream commit 62554d52e71797eefa3fc15b54008038837bb2d4 ]

.BTF and .BTF.ext ELF sections should have SHT_PROGBITS type and contain
data. If they are not, ELF is invalid or corrupted, so bail out.
Otherwise this can lead to data->d_buf being NULL and SIGSEGV later on.
Reported by oss-fuzz project.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211103173213.1376990-4-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/libbpf.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index b337d6f29098b..e8ad53d31044a 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -2870,8 +2870,12 @@ static int bpf_object__elf_collect(struct bpf_object *obj)
 		} else if (strcmp(name, MAPS_ELF_SEC) == 0) {
 			obj->efile.btf_maps_shndx = idx;
 		} else if (strcmp(name, BTF_ELF_SEC) == 0) {
+			if (sh->sh_type != SHT_PROGBITS)
+				return -LIBBPF_ERRNO__FORMAT;
 			btf_data = data;
 		} else if (strcmp(name, BTF_EXT_ELF_SEC) == 0) {
+			if (sh->sh_type != SHT_PROGBITS)
+				return -LIBBPF_ERRNO__FORMAT;
 			btf_ext_data = data;
 		} else if (sh.sh_type == SHT_SYMTAB) {
 			/* already processed during the first pass above */
-- 
2.34.1

[PATCH AUTOSEL 5.10 004/116] drm/lima: fix warning when CONFIG_DEBUG_SG=y & CONFIG_DMA_API_DEBUG=y

[Sasha Levin]

From: Qiang Yu <yuq825@gmail.com>

[ Upstream commit 89636a06fa2ee7826a19c39c19a9bc99ab9340a9 ]

Otherwise get following warning:

DMA-API: lima 1c40000.gpu: mapping sg segment longer than device claims to support [len=4149248] [max=65536]

See: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5496

Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211031041604.187216-1-yuq825@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/lima/lima_device.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/lima/lima_device.c b/drivers/gpu/drm/lima/lima_device.c
index 65fdca366e41f..36c9905894278 100644
--- a/drivers/gpu/drm/lima/lima_device.c
+++ b/drivers/gpu/drm/lima/lima_device.c
@@ -357,6 +357,7 @@ int lima_device_init(struct lima_device *ldev)
 	int err, i;
 
 	dma_set_coherent_mask(ldev->dev, DMA_BIT_MASK(32));
+	dma_set_max_seg_size(ldev->dev, UINT_MAX);
 
 	err = lima_clk_init(ldev);
 	if (err)
-- 
2.34.1

[PATCH AUTOSEL 5.10 005/116] selftests/bpf: Fix bpf_object leak in skb_ctx selftest

[Sasha Levin]

From: Andrii Nakryiko <andrii@kernel.org>

[ Upstream commit 8c7a95520184b6677ca6075e12df9c208d57d088 ]

skb_ctx selftest didn't close bpf_object implicitly allocated by
bpf_prog_test_load() helper. Fix the problem by explicitly calling
bpf_object__close() at the end of the test.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com>
Link: https://lore.kernel.org/bpf/20211107165521.9240-10-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/prog_tests/skb_ctx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/tools/testing/selftests/bpf/prog_tests/skb_ctx.c b/tools/testing/selftests/bpf/prog_tests/skb_ctx.c
index fafeddaad6a99..23915be6172d6 100644
--- a/tools/testing/selftests/bpf/prog_tests/skb_ctx.c
+++ b/tools/testing/selftests/bpf/prog_tests/skb_ctx.c
@@ -105,4 +105,6 @@ void test_skb_ctx(void)
 		   "ctx_out_mark",
 		   "skb->mark == %u, expected %d\n",
 		   skb.mark, 10);
+
+	bpf_object__close(obj);
 }
-- 
2.34.1

[PATCH AUTOSEL 5.10 006/116] ar5523: Fix null-ptr-deref with unexpected WDCMSG_TARGET_START reply

[Sasha Levin]

From: Zekun Shen <bruceshenzk@gmail.com>

[ Upstream commit ae80b6033834342601e99f74f6a62ff5092b1cee ]

Unexpected WDCMSG_TARGET_START replay can lead to null-ptr-deref
when ar->tx_cmd->odata is NULL. The patch adds a null check to
prevent such case.

KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
 ar5523_cmd+0x46a/0x581 [ar5523]
 ar5523_probe.cold+0x1b7/0x18da [ar5523]
 ? ar5523_cmd_rx_cb+0x7a0/0x7a0 [ar5523]
 ? __pm_runtime_set_status+0x54a/0x8f0
 ? _raw_spin_trylock_bh+0x120/0x120
 ? pm_runtime_barrier+0x220/0x220
 ? __pm_runtime_resume+0xb1/0xf0
 usb_probe_interface+0x25b/0x710
 really_probe+0x209/0x5d0
 driver_probe_device+0xc6/0x1b0
 device_driver_attach+0xe2/0x120

I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.

After fixing the code (fourth byte in usb packet) to WDCMSG_TARGET_START,
I got the null-ptr-deref bug. I believe the bug is triggerable whenever
cmd->odata is NULL. After patching, I tested with the same input and no
longer see the KASAN report.

This was NOT tested on a real device.

Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YXsmPQ3awHFLuAj2@10-18-43-117.dynapool.wireless.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ar5523/ar5523.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
index 49cc4b7ed5163..1baec4b412c8d 100644
--- a/drivers/net/wireless/ath/ar5523/ar5523.c
+++ b/drivers/net/wireless/ath/ar5523/ar5523.c
@@ -153,6 +153,10 @@ static void ar5523_cmd_rx_cb(struct urb *urb)
 			ar5523_err(ar, "Invalid reply to WDCMSG_TARGET_START");
 			return;
 		}
+		if (!cmd->odata) {
+			ar5523_err(ar, "Unexpected WDCMSG_TARGET_START reply");
+			return;
+		}
 		memcpy(cmd->odata, hdr + 1, sizeof(u32));
 		cmd->olen = sizeof(u32);
 		cmd->res = 0;
-- 
2.34.1

[PATCH AUTOSEL 5.10 007/116] drm/bridge: dw-hdmi: handle ELD when DRM_BRIDGE_ATTACH_NO_CONNECTOR

[Sasha Levin]

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit 3f2532d65a571ca02258b547b5b68ab2e9406fdb ]

The current ELD handling takes the internal connector ELD buffer and
shares it to the I2S and AHB sub-driver.

But with DRM_BRIDGE_ATTACH_NO_CONNECTOR, the connector is created
elsewhere (or not), and an eventual connector is known only
if the bridge chain up to a connector is enabled.

The current dw-hdmi code gets the current connector from
atomic_enable() so use the already stored connector pointer and
replace the buffer pointer with a callback returning the current
connector ELD buffer.

Since a connector is not always available, either pass an empty
ELD to the alsa HDMI driver or don't call snd_pcm_hw_constraint_eld()
in AHB driver.

Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: fixed typo in commit log]
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211029135947.3022875-1-narmstrong@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c | 10 +++++++---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h     |  4 ++--
 drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c |  9 ++++++++-
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c           | 12 ++++++++++--
 4 files changed, 27 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c
index d0db1acf11d73..7d2ed0ed2fe26 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c
@@ -320,13 +320,17 @@ static int dw_hdmi_open(struct snd_pcm_substream *substream)
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct snd_dw_hdmi *dw = substream->private_data;
 	void __iomem *base = dw->data.base;
+	u8 *eld;
 	int ret;
 
 	runtime->hw = dw_hdmi_hw;
 
-	ret = snd_pcm_hw_constraint_eld(runtime, dw->data.eld);
-	if (ret < 0)
-		return ret;
+	eld = dw->data.get_eld(dw->data.hdmi);
+	if (eld) {
+		ret = snd_pcm_hw_constraint_eld(runtime, eld);
+		if (ret < 0)
+			return ret;
+	}
 
 	ret = snd_pcm_limit_hw_rates(runtime);
 	if (ret < 0)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h
index cb07dc0da5a70..f72d27208ebef 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h
@@ -9,15 +9,15 @@ struct dw_hdmi_audio_data {
 	void __iomem *base;
 	int irq;
 	struct dw_hdmi *hdmi;
-	u8 *eld;
+	u8 *(*get_eld)(struct dw_hdmi *hdmi);
 };
 
 struct dw_hdmi_i2s_audio_data {
 	struct dw_hdmi *hdmi;
-	u8 *eld;
 
 	void (*write)(struct dw_hdmi *hdmi, u8 val, int offset);
 	u8 (*read)(struct dw_hdmi *hdmi, int offset);
+	u8 *(*get_eld)(struct dw_hdmi *hdmi);
 };
 
 #endif
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
index 9fef6413741dc..9682416056ed6 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
@@ -135,8 +135,15 @@ static int dw_hdmi_i2s_get_eld(struct device *dev, void *data, uint8_t *buf,
 			       size_t len)
 {
 	struct dw_hdmi_i2s_audio_data *audio = data;
+	u8 *eld;
+
+	eld = audio->get_eld(audio->hdmi);
+	if (eld)
+		memcpy(buf, eld, min_t(size_t, MAX_ELD_BYTES, len));
+	else
+		/* Pass en empty ELD if connector not available */
+		memset(buf, 0, len);
 
-	memcpy(buf, audio->eld, min_t(size_t, MAX_ELD_BYTES, len));
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 0c79a9ba48bb6..29c0eb4bd7546 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -756,6 +756,14 @@ static void hdmi_enable_audio_clk(struct dw_hdmi *hdmi, bool enable)
 	hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS);
 }
 
+static u8 *hdmi_audio_get_eld(struct dw_hdmi *hdmi)
+{
+	if (!hdmi->curr_conn)
+		return NULL;
+
+	return hdmi->curr_conn->eld;
+}
+
 static void dw_hdmi_ahb_audio_enable(struct dw_hdmi *hdmi)
 {
 	hdmi_set_cts_n(hdmi, hdmi->audio_cts, hdmi->audio_n);
@@ -3395,7 +3403,7 @@ struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
 		audio.base = hdmi->regs;
 		audio.irq = irq;
 		audio.hdmi = hdmi;
-		audio.eld = hdmi->connector.eld;
+		audio.get_eld = hdmi_audio_get_eld;
 		hdmi->enable_audio = dw_hdmi_ahb_audio_enable;
 		hdmi->disable_audio = dw_hdmi_ahb_audio_disable;
 
@@ -3408,7 +3416,7 @@ struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
 		struct dw_hdmi_i2s_audio_data audio;
 
 		audio.hdmi	= hdmi;
-		audio.eld	= hdmi->connector.eld;
+		audio.get_eld	= hdmi_audio_get_eld;
 		audio.write	= hdmi_writeb;
 		audio.read	= hdmi_readb;
 		hdmi->enable_audio = dw_hdmi_i2s_audio_enable;
-- 
2.34.1

[PATCH AUTOSEL 5.10 008/116] drm/nouveau/pmu/gm200-: avoid touching PMU outside of DEVINIT/PREOS/ACR

[Sasha Levin]

From: Ben Skeggs <bskeggs@redhat.com>

[ Upstream commit 1d2271d2fb85e54bfc9630a6c30ac0feb9ffb983 ]

There have been reports of the WFI timing out on some boards, and a
patch was proposed to just remove it.  This stuff is rather fragile,
and I believe the WFI might be needed with our FW prior to GM200.

However, we probably should not be touching PMU during init on GPUs
where we depend on NVIDIA FW, outside of limited circumstances, so
this should be a somewhat safer change that achieves the desired
result.

Reported-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/nouveau/nvkm/subdev/pmu/base.c    | 37 +++++++++++--------
 1 file changed, 21 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c
index a0fe607c9c07f..3bfc55c571b5e 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c
@@ -94,20 +94,13 @@ nvkm_pmu_fini(struct nvkm_subdev *subdev, bool suspend)
 	return 0;
 }
 
-static int
+static void
 nvkm_pmu_reset(struct nvkm_pmu *pmu)
 {
 	struct nvkm_device *device = pmu->subdev.device;
 
 	if (!pmu->func->enabled(pmu))
-		return 0;
-
-	/* Inhibit interrupts, and wait for idle. */
-	nvkm_wr32(device, 0x10a014, 0x0000ffff);
-	nvkm_msec(device, 2000,
-		if (!nvkm_rd32(device, 0x10a04c))
-			break;
-	);
+		return;
 
 	/* Reset. */
 	if (pmu->func->reset)
@@ -118,25 +111,37 @@ nvkm_pmu_reset(struct nvkm_pmu *pmu)
 		if (!(nvkm_rd32(device, 0x10a10c) & 0x00000006))
 			break;
 	);
-
-	return 0;
 }
 
 static int
 nvkm_pmu_preinit(struct nvkm_subdev *subdev)
 {
 	struct nvkm_pmu *pmu = nvkm_pmu(subdev);
-	return nvkm_pmu_reset(pmu);
+	nvkm_pmu_reset(pmu);
+	return 0;
 }
 
 static int
 nvkm_pmu_init(struct nvkm_subdev *subdev)
 {
 	struct nvkm_pmu *pmu = nvkm_pmu(subdev);
-	int ret = nvkm_pmu_reset(pmu);
-	if (ret == 0 && pmu->func->init)
-		ret = pmu->func->init(pmu);
-	return ret;
+	struct nvkm_device *device = pmu->subdev.device;
+
+	if (!pmu->func->init)
+		return 0;
+
+	if (pmu->func->enabled(pmu)) {
+		/* Inhibit interrupts, and wait for idle. */
+		nvkm_wr32(device, 0x10a014, 0x0000ffff);
+		nvkm_msec(device, 2000,
+			if (!nvkm_rd32(device, 0x10a04c))
+				break;
+		);
+
+		nvkm_pmu_reset(pmu);
+	}
+
+	return pmu->func->init(pmu);
 }
 
 static void *
-- 
2.34.1

[PATCH AUTOSEL 5.10 009/116] media: atomisp: fix try_fmt logic

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit c9e9094c4e42124af909b2f5f6ded0498e0854ac ]

The internal try_fmt logic is not meant to provide everything
that the V4L2 API should provide. Also, it doesn't decrement
the pads that are used only internally by the driver, but aren't
part of the device's output.

Fix it.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../staging/media/atomisp/pci/atomisp_ioctl.c | 72 ++++++++++++++++++-
 1 file changed, 71 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
index 9da82855552de..973012c6153e5 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
@@ -834,6 +834,72 @@ static int atomisp_g_fmt_file(struct file *file, void *fh,
 	return 0;
 }
 
+static int atomisp_adjust_fmt(struct v4l2_format *f)
+{
+	const struct atomisp_format_bridge *format_bridge;
+	u32 padded_width;
+
+	format_bridge = atomisp_get_format_bridge(f->fmt.pix.pixelformat);
+
+	padded_width = f->fmt.pix.width + pad_w;
+
+	if (format_bridge->planar) {
+		f->fmt.pix.bytesperline = padded_width;
+		f->fmt.pix.sizeimage = PAGE_ALIGN(f->fmt.pix.height *
+						  DIV_ROUND_UP(format_bridge->depth *
+						  padded_width, 8));
+	} else {
+		f->fmt.pix.bytesperline = DIV_ROUND_UP(format_bridge->depth *
+						      padded_width, 8);
+		f->fmt.pix.sizeimage = PAGE_ALIGN(f->fmt.pix.height * f->fmt.pix.bytesperline);
+	}
+
+	if (f->fmt.pix.field == V4L2_FIELD_ANY)
+		f->fmt.pix.field = V4L2_FIELD_NONE;
+
+	format_bridge = atomisp_get_format_bridge(f->fmt.pix.pixelformat);
+	if (!format_bridge)
+		return -EINVAL;
+
+	/* Currently, raw formats are broken!!! */
+	if (format_bridge->sh_fmt == IA_CSS_FRAME_FORMAT_RAW) {
+		f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUV420;
+
+		format_bridge = atomisp_get_format_bridge(f->fmt.pix.pixelformat);
+		if (!format_bridge)
+			return -EINVAL;
+	}
+
+	padded_width = f->fmt.pix.width + pad_w;
+
+	if (format_bridge->planar) {
+		f->fmt.pix.bytesperline = padded_width;
+		f->fmt.pix.sizeimage = PAGE_ALIGN(f->fmt.pix.height *
+						  DIV_ROUND_UP(format_bridge->depth *
+						  padded_width, 8));
+	} else {
+		f->fmt.pix.bytesperline = DIV_ROUND_UP(format_bridge->depth *
+						      padded_width, 8);
+		f->fmt.pix.sizeimage = PAGE_ALIGN(f->fmt.pix.height * f->fmt.pix.bytesperline);
+	}
+
+	if (f->fmt.pix.field == V4L2_FIELD_ANY)
+		f->fmt.pix.field = V4L2_FIELD_NONE;
+
+	/*
+	 * FIXME: do we need to setup this differently, depending on the
+	 * sensor or the pipeline?
+	 */
+	f->fmt.pix.colorspace = V4L2_COLORSPACE_REC709;
+	f->fmt.pix.ycbcr_enc = V4L2_YCBCR_ENC_709;
+	f->fmt.pix.xfer_func = V4L2_XFER_FUNC_709;
+
+	f->fmt.pix.width -= pad_w;
+	f->fmt.pix.height -= pad_h;
+
+	return 0;
+}
+
 /* This function looks up the closest available resolution. */
 static int atomisp_try_fmt_cap(struct file *file, void *fh,
 			       struct v4l2_format *f)
@@ -845,7 +911,11 @@ static int atomisp_try_fmt_cap(struct file *file, void *fh,
 	rt_mutex_lock(&isp->mutex);
 	ret = atomisp_try_fmt(vdev, f, NULL);
 	rt_mutex_unlock(&isp->mutex);
-	return ret;
+
+	if (ret)
+		return ret;
+
+	return atomisp_adjust_fmt(f);
 }
 
 static int atomisp_s_fmt_cap(struct file *file, void *fh,
-- 
2.34.1

[PATCH AUTOSEL 5.10 010/116] media: atomisp: set per-device's default mode

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 2c45e343c581091835c9047ed5298518aa133163 ]

The atomisp driver originally used the s_parm command to
initialize the run_mode type to the driver. So, before start
setting up the streaming, s_parm should be called.

So, even having 5 "normal" video devices, one meant to be used
for each type, the run_mode was actually selected when
s_parm is called.

Without setting the run mode, applications that don't call
VIDIOC_SET_PARM with a custom atomisp parameters won't work, as
the pipeline won't be set:

	atomisp-isp2 0000:00:03.0: can't create streams
	atomisp-isp2 0000:00:03.0: __get_frame_info 1600x1200 (padded to 0) returned -22

However, commit 8a7c5594c020 ("media: v4l2-ioctl: clear fields in s_parm")
broke support for it, with a good reason, as drivers shoudn't be
extending the API for their own purposes.

So, as an step to allow generic apps to use this driver, put
the device's run_mode in preview after open.

After this patch, using v4l2grab starts to work on preview
mode (/dev/video2):

	$ v4l2grab -f YUYV -x 1600 -y 1200 -d /dev/video2 -n 1 -u
	$ feh out000.pnm

So, let's just setup the default run_mode that each video devnode
should assume, setting it at open() time.

Reported-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/atomisp/pci/atomisp_fops.c  |  5 +++++
 .../staging/media/atomisp/pci/atomisp_subdev.c    | 15 ++++++++++-----
 .../staging/media/atomisp/pci/atomisp_subdev.h    |  3 +++
 drivers/staging/media/atomisp/pci/atomisp_v4l2.c  |  4 +++-
 drivers/staging/media/atomisp/pci/atomisp_v4l2.h  |  3 ++-
 5 files changed, 23 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/media/atomisp/pci/atomisp_fops.c b/drivers/staging/media/atomisp/pci/atomisp_fops.c
index f1e6b25978534..e097a91444d7e 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_fops.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_fops.c
@@ -877,6 +877,11 @@ static int atomisp_open(struct file *file)
 	else
 		pipe->users++;
 	rt_mutex_unlock(&isp->mutex);
+
+	/* Ensure that a mode is set */
+	if (asd)
+		v4l2_ctrl_s_ctrl(asd->run_mode, pipe->default_run_mode);
+
 	return 0;
 
 css_error:
diff --git a/drivers/staging/media/atomisp/pci/atomisp_subdev.c b/drivers/staging/media/atomisp/pci/atomisp_subdev.c
index dcc2dd981ca60..628e85799274d 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_subdev.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_subdev.c
@@ -1178,23 +1178,28 @@ static int isp_subdev_init_entities(struct atomisp_sub_device *asd)
 
 	atomisp_init_acc_pipe(asd, &asd->video_acc);
 
-	ret = atomisp_video_init(&asd->video_in, "MEMORY");
+	ret = atomisp_video_init(&asd->video_in, "MEMORY",
+				 ATOMISP_RUN_MODE_SDV);
 	if (ret < 0)
 		return ret;
 
-	ret = atomisp_video_init(&asd->video_out_capture, "CAPTURE");
+	ret = atomisp_video_init(&asd->video_out_capture, "CAPTURE",
+				 ATOMISP_RUN_MODE_STILL_CAPTURE);
 	if (ret < 0)
 		return ret;
 
-	ret = atomisp_video_init(&asd->video_out_vf, "VIEWFINDER");
+	ret = atomisp_video_init(&asd->video_out_vf, "VIEWFINDER",
+				 ATOMISP_RUN_MODE_CONTINUOUS_CAPTURE);
 	if (ret < 0)
 		return ret;
 
-	ret = atomisp_video_init(&asd->video_out_preview, "PREVIEW");
+	ret = atomisp_video_init(&asd->video_out_preview, "PREVIEW",
+				 ATOMISP_RUN_MODE_PREVIEW);
 	if (ret < 0)
 		return ret;
 
-	ret = atomisp_video_init(&asd->video_out_video_capture, "VIDEO");
+	ret = atomisp_video_init(&asd->video_out_video_capture, "VIDEO",
+				 ATOMISP_RUN_MODE_VIDEO);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/staging/media/atomisp/pci/atomisp_subdev.h b/drivers/staging/media/atomisp/pci/atomisp_subdev.h
index 330a77eed8aa6..12215d7406169 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_subdev.h
+++ b/drivers/staging/media/atomisp/pci/atomisp_subdev.h
@@ -81,6 +81,9 @@ struct atomisp_video_pipe {
 	/* the link list to store per_frame parameters */
 	struct list_head per_frame_params;
 
+	/* Store here the initial run mode */
+	unsigned int default_run_mode;
+
 	unsigned int buffers_in_css;
 
 	/* irq_lock is used to protect video buffer state change operations and
diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
index fa1bd99cd6f17..3234d8d198045 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
@@ -447,7 +447,8 @@ const struct atomisp_dfs_config dfs_config_cht_soc = {
 	.dfs_table_size = ARRAY_SIZE(dfs_rules_cht_soc),
 };
 
-int atomisp_video_init(struct atomisp_video_pipe *video, const char *name)
+int atomisp_video_init(struct atomisp_video_pipe *video, const char *name,
+		       unsigned int run_mode)
 {
 	int ret;
 	const char *direction;
@@ -478,6 +479,7 @@ int atomisp_video_init(struct atomisp_video_pipe *video, const char *name)
 		 "ATOMISP ISP %s %s", name, direction);
 	video->vdev.release = video_device_release_empty;
 	video_set_drvdata(&video->vdev, video->isp);
+	video->default_run_mode = run_mode;
 
 	return 0;
 }
diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.h b/drivers/staging/media/atomisp/pci/atomisp_v4l2.h
index 81bb356b81720..72611b8286a4a 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.h
+++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.h
@@ -27,7 +27,8 @@ struct v4l2_device;
 struct atomisp_device;
 struct firmware;
 
-int atomisp_video_init(struct atomisp_video_pipe *video, const char *name);
+int atomisp_video_init(struct atomisp_video_pipe *video, const char *name,
+		       unsigned int run_mode);
 void atomisp_acc_init(struct atomisp_acc_pipe *video, const char *name);
 void atomisp_video_unregister(struct atomisp_video_pipe *video);
 void atomisp_acc_unregister(struct atomisp_acc_pipe *video);
-- 
2.34.1

[PATCH AUTOSEL 5.10 011/116] media: atomisp-ov2680: Fix ov2680_set_fmt() clobbering the exposure

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 4492289c31364d28c2680b43b18883385a5d216c ]

Now that we restore the default or last user set exposure setting on
power_up() there is no need for the registers written by ov2680_set_fmt()
to write to the exposure register.

Not doing so fixes the exposure always being reset to the value from
the res->regs array after a set_fmt().

Link: https://lore.kernel.org/linux-media/20211107171549.267583-11-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/atomisp/i2c/ov2680.h | 24 ----------------------
 1 file changed, 24 deletions(-)

diff --git a/drivers/staging/media/atomisp/i2c/ov2680.h b/drivers/staging/media/atomisp/i2c/ov2680.h
index 49920245e0647..cafb798a71abe 100644
--- a/drivers/staging/media/atomisp/i2c/ov2680.h
+++ b/drivers/staging/media/atomisp/i2c/ov2680.h
@@ -289,8 +289,6 @@ static struct ov2680_reg const ov2680_global_setting[] = {
  */
 static struct ov2680_reg const ov2680_QCIF_30fps[] = {
 	{0x3086, 0x01},
-	{0x3501, 0x24},
-	{0x3502, 0x40},
 	{0x370a, 0x23},
 	{0x3801, 0xa0},
 	{0x3802, 0x00},
@@ -334,8 +332,6 @@ static struct ov2680_reg const ov2680_QCIF_30fps[] = {
  */
 static struct ov2680_reg const ov2680_CIF_30fps[] = {
 	{0x3086, 0x01},
-	{0x3501, 0x24},
-	{0x3502, 0x40},
 	{0x370a, 0x23},
 	{0x3801, 0xa0},
 	{0x3802, 0x00},
@@ -377,8 +373,6 @@ static struct ov2680_reg const ov2680_CIF_30fps[] = {
  */
 static struct ov2680_reg const ov2680_QVGA_30fps[] = {
 	{0x3086, 0x01},
-	{0x3501, 0x24},
-	{0x3502, 0x40},
 	{0x370a, 0x23},
 	{0x3801, 0xa0},
 	{0x3802, 0x00},
@@ -420,8 +414,6 @@ static struct ov2680_reg const ov2680_QVGA_30fps[] = {
  */
 static struct ov2680_reg const ov2680_656x496_30fps[] = {
 	{0x3086, 0x01},
-	{0x3501, 0x24},
-	{0x3502, 0x40},
 	{0x370a, 0x23},
 	{0x3801, 0xa0},
 	{0x3802, 0x00},
@@ -463,8 +455,6 @@ static struct ov2680_reg const ov2680_656x496_30fps[] = {
 */
 static struct ov2680_reg const ov2680_720x592_30fps[] = {
 	{0x3086, 0x01},
-	{0x3501, 0x26},
-	{0x3502, 0x40},
 	{0x370a, 0x23},
 	{0x3801, 0x00}, // X_ADDR_START;
 	{0x3802, 0x00},
@@ -508,8 +498,6 @@ static struct ov2680_reg const ov2680_720x592_30fps[] = {
 */
 static struct ov2680_reg const ov2680_800x600_30fps[] = {
 	{0x3086, 0x01},
-	{0x3501, 0x26},
-	{0x3502, 0x40},
 	{0x370a, 0x23},
 	{0x3801, 0x00},
 	{0x3802, 0x00},
@@ -551,8 +539,6 @@ static struct ov2680_reg const ov2680_800x600_30fps[] = {
  */
 static struct ov2680_reg const ov2680_720p_30fps[] = {
 	{0x3086, 0x00},
-	{0x3501, 0x48},
-	{0x3502, 0xe0},
 	{0x370a, 0x21},
 	{0x3801, 0xa0},
 	{0x3802, 0x00},
@@ -594,8 +580,6 @@ static struct ov2680_reg const ov2680_720p_30fps[] = {
  */
 static struct ov2680_reg const ov2680_1296x976_30fps[] = {
 	{0x3086, 0x00},
-	{0x3501, 0x48},
-	{0x3502, 0xe0},
 	{0x370a, 0x21},
 	{0x3801, 0xa0},
 	{0x3802, 0x00},
@@ -637,8 +621,6 @@ static struct ov2680_reg const ov2680_1296x976_30fps[] = {
 */
 static struct ov2680_reg const ov2680_1456x1096_30fps[] = {
 	{0x3086, 0x00},
-	{0x3501, 0x48},
-	{0x3502, 0xe0},
 	{0x370a, 0x21},
 	{0x3801, 0x90},
 	{0x3802, 0x00},
@@ -682,8 +664,6 @@ static struct ov2680_reg const ov2680_1456x1096_30fps[] = {
 
 static struct ov2680_reg const ov2680_1616x916_30fps[] = {
 	{0x3086, 0x00},
-	{0x3501, 0x48},
-	{0x3502, 0xe0},
 	{0x370a, 0x21},
 	{0x3801, 0x00},
 	{0x3802, 0x00},
@@ -726,8 +706,6 @@ static struct ov2680_reg const ov2680_1616x916_30fps[] = {
 #if 0
 static struct ov2680_reg const ov2680_1616x1082_30fps[] = {
 	{0x3086, 0x00},
-	{0x3501, 0x48},
-	{0x3502, 0xe0},
 	{0x370a, 0x21},
 	{0x3801, 0x00},
 	{0x3802, 0x00},
@@ -769,8 +747,6 @@ static struct ov2680_reg const ov2680_1616x1082_30fps[] = {
  */
 static struct ov2680_reg const ov2680_1616x1216_30fps[] = {
 	{0x3086, 0x00},
-	{0x3501, 0x48},
-	{0x3502, 0xe0},
 	{0x370a, 0x21},
 	{0x3801, 0x00},
 	{0x3802, 0x00},
-- 
2.34.1

[PATCH AUTOSEL 5.10 012/116] ARM: shmobile: rcar-gen2: Add missing of_node_put()

[Sasha Levin]

From: Wan Jiabing <wanjiabing@vivo.com>

[ Upstream commit 85744f2d938c5f3cfc44cb6533c157469634da93 ]

Fix following coccicheck warning:
./arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c:156:1-33: Function
for_each_matching_node_and_match should have of_node_put() before break
and goto.

Early exits from for_each_matching_node_and_match() should decrement the
node reference counter.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20211018014503.7598-1-wanjiabing@vivo.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index ee949255ced3f..09ef73b99dd86 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -154,8 +154,10 @@ static int __init rcar_gen2_regulator_quirk(void)
 		return -ENODEV;
 
 	for_each_matching_node_and_match(np, rcar_gen2_quirk_match, &id) {
-		if (!of_device_is_available(np))
+		if (!of_device_is_available(np)) {
+			of_node_put(np);
 			break;
+		}
 
 		ret = of_property_read_u32(np, "reg", &addr);
 		if (ret)	/* Skip invalid entry and continue */
@@ -164,6 +166,7 @@ static int __init rcar_gen2_regulator_quirk(void)
 		quirk = kzalloc(sizeof(*quirk), GFP_KERNEL);
 		if (!quirk) {
 			ret = -ENOMEM;
+			of_node_put(np);
 			goto err_mem;
 		}
 
-- 
2.34.1

[PATCH AUTOSEL 5.10 013/116] batman-adv: allow netlink usage in unprivileged containers

[Sasha Levin]

From: Linus Lüssing <linus.luessing@c0d3.blue>

[ Upstream commit 9057d6c23e7388ee9d037fccc9a7bc8557ce277b ]

Currently, creating a batman-adv interface in an unprivileged LXD
container and attaching secondary interfaces to it with "ip" or "batctl"
works fine. However all batctl debug and configuration commands
fail:

  root@container:~# batctl originators
  Error received: Operation not permitted
  root@container:~# batctl orig_interval
  1000
  root@container:~# batctl orig_interval 2000
  root@container:~# batctl orig_interval
  1000

To fix this change the generic netlink permissions from GENL_ADMIN_PERM
to GENL_UNS_ADMIN_PERM. This way a batman-adv interface is fully
maintainable as root from within a user namespace, from an unprivileged
container.

All except one batman-adv netlink setting are per interface and do not
leak information or change settings from the host system and are
therefore save to retrieve or modify as root from within an unprivileged
container.

"batctl routing_algo" / BATADV_CMD_GET_ROUTING_ALGOS is the only
exception: It provides the batman-adv kernel module wide default routing
algorithm. However it is read-only from netlink and an unprivileged
container is still not allowed to modify
/sys/module/batman_adv/parameters/routing_algo. Instead it is advised to
use the newly introduced "batctl if create routing_algo RA_NAME" /
IFLA_BATADV_ALGO_NAME to set the routing algorithm on interface
creation, which already works fine in an unprivileged container.

Cc: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/netlink.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index c7a55647b520e..121459704b069 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -1361,21 +1361,21 @@ static const struct genl_small_ops batadv_netlink_ops[] = {
 	{
 		.cmd = BATADV_CMD_TP_METER,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 		.doit = batadv_netlink_tp_meter_start,
 		.internal_flags = BATADV_FLAG_NEED_MESH,
 	},
 	{
 		.cmd = BATADV_CMD_TP_METER_CANCEL,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 		.doit = batadv_netlink_tp_meter_cancel,
 		.internal_flags = BATADV_FLAG_NEED_MESH,
 	},
 	{
 		.cmd = BATADV_CMD_GET_ROUTING_ALGOS,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 		.dumpit = batadv_algo_dump,
 	},
 	{
@@ -1390,68 +1390,68 @@ static const struct genl_small_ops batadv_netlink_ops[] = {
 	{
 		.cmd = BATADV_CMD_GET_TRANSTABLE_LOCAL,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 		.dumpit = batadv_tt_local_dump,
 	},
 	{
 		.cmd = BATADV_CMD_GET_TRANSTABLE_GLOBAL,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 		.dumpit = batadv_tt_global_dump,
 	},
 	{
 		.cmd = BATADV_CMD_GET_ORIGINATORS,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 		.dumpit = batadv_orig_dump,
 	},
 	{
 		.cmd = BATADV_CMD_GET_NEIGHBORS,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 		.dumpit = batadv_hardif_neigh_dump,
 	},
 	{
 		.cmd = BATADV_CMD_GET_GATEWAYS,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 		.dumpit = batadv_gw_dump,
 	},
 	{
 		.cmd = BATADV_CMD_GET_BLA_CLAIM,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 		.dumpit = batadv_bla_claim_dump,
 	},
 	{
 		.cmd = BATADV_CMD_GET_BLA_BACKBONE,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 		.dumpit = batadv_bla_backbone_dump,
 	},
 	{
 		.cmd = BATADV_CMD_GET_DAT_CACHE,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 		.dumpit = batadv_dat_cache_dump,
 	},
 	{
 		.cmd = BATADV_CMD_GET_MCAST_FLAGS,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 		.dumpit = batadv_mcast_flags_dump,
 	},
 	{
 		.cmd = BATADV_CMD_SET_MESH,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 		.doit = batadv_netlink_set_mesh,
 		.internal_flags = BATADV_FLAG_NEED_MESH,
 	},
 	{
 		.cmd = BATADV_CMD_SET_HARDIF,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 		.doit = batadv_netlink_set_hardif,
 		.internal_flags = BATADV_FLAG_NEED_MESH |
 				  BATADV_FLAG_NEED_HARDIF,
@@ -1467,7 +1467,7 @@ static const struct genl_small_ops batadv_netlink_ops[] = {
 	{
 		.cmd = BATADV_CMD_SET_VLAN,
 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
-		.flags = GENL_ADMIN_PERM,
+		.flags = GENL_UNS_ADMIN_PERM,
 		.doit = batadv_netlink_set_vlan,
 		.internal_flags = BATADV_FLAG_NEED_MESH |
 				  BATADV_FLAG_NEED_VLAN,
-- 
2.34.1

[PATCH AUTOSEL 5.10 014/116] media: atomisp: handle errors at sh_css_create_isp_params()

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 58043dbf6d1ae9deab4f5aa1e039c70112017682 ]

The succ var tracks memory allocation erros on this function.

Fix it, in order to stop this W=1 Werror in clang:

drivers/staging/media/atomisp/pci/sh_css_params.c:2430:7: error: variable 'succ' set but not used [-Werror,-Wunused-but-set-variable]
        bool succ = true;
             ^

Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/atomisp/pci/sh_css_params.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/media/atomisp/pci/sh_css_params.c b/drivers/staging/media/atomisp/pci/sh_css_params.c
index 24fc497bd4915..8d6514c45eeb6 100644
--- a/drivers/staging/media/atomisp/pci/sh_css_params.c
+++ b/drivers/staging/media/atomisp/pci/sh_css_params.c
@@ -2437,7 +2437,7 @@ sh_css_create_isp_params(struct ia_css_stream *stream,
 	unsigned int i;
 	struct sh_css_ddr_address_map *ddr_ptrs;
 	struct sh_css_ddr_address_map_size *ddr_ptrs_size;
-	int err = 0;
+	int err;
 	size_t params_size;
 	struct ia_css_isp_parameters *params =
 	kvmalloc(sizeof(struct ia_css_isp_parameters), GFP_KERNEL);
@@ -2482,7 +2482,11 @@ sh_css_create_isp_params(struct ia_css_stream *stream,
 	succ &= (ddr_ptrs->macc_tbl != mmgr_NULL);
 
 	*isp_params_out = params;
-	return err;
+
+	if (!succ)
+		return -ENOMEM;
+
+	return 0;
 }
 
 static bool
-- 
2.34.1

[PATCH AUTOSEL 5.10 015/116] ath11k: Fix crash caused by uninitialized TX ring

[Sasha Levin]

From: Baochen Qiang <bqiang@codeaurora.org>

[ Upstream commit 273703ebdb01b6c5f1aaf4b98fb57b177609055c ]

Commit 31582373a4a8 ("ath11k: Change number of TCL rings to one for
QCA6390") avoids initializing the other entries of dp->tx_ring cause
the corresponding TX rings on QCA6390/WCN6855 are not used, but leaves
those ring masks in ath11k_hw_ring_mask_qca6390.tx unchanged. Normally
this is OK because we will only get interrupts from the first TX ring
on these chips and thus only the first entry of dp->tx_ring is involved.

In case of one MSI vector, all DP rings share the same IRQ. For each
interrupt, all rings have to be checked, which means the other entries
of dp->tx_ring are involved. However since they are not initialized,
system crashes.

Fix this issue by simply removing those ring masks.

crash stack:
[  102.907438] BUG: kernel NULL pointer dereference, address: 0000000000000028
[  102.907447] #PF: supervisor read access in kernel mode
[  102.907451] #PF: error_code(0x0000) - not-present page
[  102.907453] PGD 1081f0067 P4D 1081f0067 PUD 1081f1067 PMD 0
[  102.907460] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[  102.907465] CPU: 0 PID: 3511 Comm: apt-check Kdump: loaded Tainted: G            E     5.15.0-rc4-wt-ath+ #20
[  102.907470] Hardware name: AMD Celadon-RN/Celadon-RN, BIOS RCD1005E 10/08/2020
[  102.907472] RIP: 0010:ath11k_dp_tx_completion_handler+0x201/0x830 [ath11k]
[  102.907497] Code: 3c 24 4e 8d ac 37 10 04 00 00 4a 8d bc 37 68 04 00 00 48 89 3c 24 48 63 c8 89 83 84 18 00 00 48 c1 e1 05 48 03 8b 78 18 00 00 <8b> 51 08 89 d6 83 e6 07 89 74 24 24 83 fe 03 74 04 85 f6 75 63 41
[  102.907501] RSP: 0000:ffff9b7340003e08 EFLAGS: 00010202
[  102.907505] RAX: 0000000000000001 RBX: ffff8e21530c0100 RCX: 0000000000000020
[  102.907508] RDX: 0000000000000000 RSI: 00000000fffffe00 RDI: ffff8e21530c1938
[  102.907511] RBP: ffff8e21530c0000 R08: 0000000000000001 R09: 0000000000000000
[  102.907513] R10: ffff8e2145534c10 R11: 0000000000000001 R12: ffff8e21530c2938
[  102.907515] R13: ffff8e21530c18e0 R14: 0000000000000100 R15: ffff8e21530c2978
[  102.907518] FS:  00007f5d4297e740(0000) GS:ffff8e243d600000(0000) knlGS:0000000000000000
[  102.907521] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  102.907524] CR2: 0000000000000028 CR3: 00000001034ea000 CR4: 0000000000350ef0
[  102.907527] Call Trace:
[  102.907531]  <IRQ>
[  102.907537]  ath11k_dp_service_srng+0x5c/0x2f0 [ath11k]
[  102.907556]  ath11k_pci_ext_grp_napi_poll+0x21/0x70 [ath11k_pci]
[  102.907562]  __napi_poll+0x2c/0x160
[  102.907570]  net_rx_action+0x251/0x310
[  102.907576]  __do_softirq+0x107/0x2fc
[  102.907585]  irq_exit_rcu+0x74/0x90
[  102.907593]  common_interrupt+0x83/0xa0
[  102.907600]  </IRQ>
[  102.907601]  asm_common_interrupt+0x1e/0x40

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211026011605.58615-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/hw.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c
index 66331da350129..f6282e8702923 100644
--- a/drivers/net/wireless/ath/ath11k/hw.c
+++ b/drivers/net/wireless/ath/ath11k/hw.c
@@ -246,8 +246,6 @@ const struct ath11k_hw_ring_mask ath11k_hw_ring_mask_ipq8074 = {
 const struct ath11k_hw_ring_mask ath11k_hw_ring_mask_qca6390 = {
 	.tx  = {
 		ATH11K_TX_RING_MASK_0,
-		ATH11K_TX_RING_MASK_1,
-		ATH11K_TX_RING_MASK_2,
 	},
 	.rx_mon_status = {
 		0, 0, 0, 0,
-- 
2.34.1

[PATCH AUTOSEL 5.10 016/116] usb: gadget: f_fs: Use stream_open() for endpoint files

[Sasha Levin]

From: Pavankumar Kondeti <quic_pkondeti@quicinc.com>

[ Upstream commit c76ef96fc00eb398c8fc836b0eb2f82bcc619dc7 ]

Function fs endpoint file operations are synchronized via an interruptible
mutex wait. However we see threads that do ep file operations concurrently
are getting blocked for the mutex lock in __fdget_pos(). This is an
uninterruptible wait and we see hung task warnings and kernel panic
if hung_task_panic systcl is enabled if host does not send/receive
the data for long time.

The reason for threads getting blocked in __fdget_pos() is due to
the file position protection introduced by the commit 9c225f2655e3
("vfs: atomic f_pos accesses as per POSIX"). Since function fs
endpoint files does not have the notion of the file position, switch
to the stream mode. This will bypass the file position mutex and
threads will be blocked in interruptible state for the function fs
mutex.

It should not affects user space as we are only changing the task state
changes the task state from UNINTERRUPTIBLE to INTERRUPTIBLE while waiting
for the USB transfers to be finished. However there is a slight change to
the O_NONBLOCK behavior. Earlier threads that are using O_NONBLOCK are also
getting blocked inside fdget_pos(). Now they reach to function fs and error
code is returned. The non blocking behavior is actually honoured now.

Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Link: https://lore.kernel.org/r/1636712682-1226-1-git-send-email-quic_pkondeti@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/f_fs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index cbb7947f366f9..d8652321e15e9 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -614,7 +614,7 @@ static int ffs_ep0_open(struct inode *inode, struct file *file)
 	file->private_data = ffs;
 	ffs_data_opened(ffs);
 
-	return 0;
+	return stream_open(inode, file);
 }
 
 static int ffs_ep0_release(struct inode *inode, struct file *file)
@@ -1152,7 +1152,7 @@ ffs_epfile_open(struct inode *inode, struct file *file)
 	file->private_data = epfile;
 	ffs_data_opened(epfile->ffs);
 
-	return 0;
+	return stream_open(inode, file);
 }
 
 static int ffs_aio_cancel(struct kiocb *kiocb)
-- 
2.34.1

[PATCH AUTOSEL 5.10 017/116] drm: panel-orientation-quirks: Add quirk for the Lenovo Yoga Book X91F/L

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit bc30c3b0c8a1904d83d5f0d60fb8650a334b207b ]

The Lenovo Yoga Book X91F/L uses a panel which has been mounted
90 degrees rotated. Add a quirk for this.

Cc: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Ser <contact@emersion.fr>
Tested-by: Yauhen Kharuzhy <jekhor@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211106130227.11927-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index a950d5db211c5..9d1bd8f491ad7 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -248,6 +248,12 @@ static const struct dmi_system_id orientation_data[] = {
 		  DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad D330-10IGM"),
 		},
 		.driver_data = (void *)&lcd1200x1920_rightside_up,
+	}, {	/* Lenovo Yoga Book X90F / X91F / X91L */
+		.matches = {
+		  /* Non exact match to match all versions */
+		  DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9"),
+		},
+		.driver_data = (void *)&lcd1200x1920_rightside_up,
 	}, {	/* OneGX1 Pro */
 		.matches = {
 		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "SYSTEM_MANUFACTURER"),
-- 
2.34.1

[PATCH AUTOSEL 5.10 018/116] HID: apple: Do not reset quirks when the Fn key is not found

[Sasha Levin]

From: José Expósito <jose.exposito89@gmail.com>

[ Upstream commit a5fe7864d8ada170f19cc47d176bf8260ffb4263 ]

When a keyboard without a function key is detected, instead of removing
all quirks, remove only the APPLE_HAS_FN quirk.

Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-apple.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 5c1d33cda863b..e5d2e7e9541b8 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -415,7 +415,7 @@ static int apple_input_configured(struct hid_device *hdev,
 
 	if ((asc->quirks & APPLE_HAS_FN) && !asc->fn_found) {
 		hid_info(hdev, "Fn key not found (Apple Wireless Keyboard clone?), disabling Fn key handling\n");
-		asc->quirks = 0;
+		asc->quirks &= ~APPLE_HAS_FN;
 	}
 
 	return 0;
-- 
2.34.1

[PATCH AUTOSEL 5.10 019/116] media: b2c2: Add missing check in flexcop_pci_isr:

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit b13203032e679674c7c518f52a7ec0801ca3a829 ]

A out-of-bounds bug can be triggered by an interrupt, the reason for
this bug is the lack of checking of register values.

In flexcop_pci_isr, the driver reads value from a register and uses it as
a dma address. Finally, this address will be passed to the count parameter
of find_next_packet. If this value is larger than the size of dma, the
index of buffer will be out-of-bounds.

Fix this by adding a check after reading the value of the register.

The following KASAN report reveals it:

BUG: KASAN: slab-out-of-bounds in find_next_packet
drivers/media/dvb-core/dvb_demux.c:528 [inline]
BUG: KASAN: slab-out-of-bounds in _dvb_dmx_swfilter
drivers/media/dvb-core/dvb_demux.c:572 [inline]
BUG: KASAN: slab-out-of-bounds in dvb_dmx_swfilter+0x3fa/0x420
drivers/media/dvb-core/dvb_demux.c:603
Read of size 1 at addr ffff8880608c00a0 by task swapper/2/0

CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xec/0x156 lib/dump_stack.c:118
 print_address_description+0x78/0x290 mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report+0x25b/0x380 mm/kasan/report.c:412
 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:430
 find_next_packet drivers/media/dvb-core/dvb_demux.c:528 [inline]
 _dvb_dmx_swfilter drivers/media/dvb-core/dvb_demux.c:572 [inline]
 dvb_dmx_swfilter+0x3fa/0x420 drivers/media/dvb-core/dvb_demux.c:603
 flexcop_pass_dmx_data+0x2e/0x40 drivers/media/common/b2c2/flexcop.c:167
 flexcop_pci_isr+0x3d1/0x5d0 drivers/media/pci/b2c2/flexcop-pci.c:212
 __handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
 handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
 handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
 handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
 generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
 handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
 do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
 </IRQ>
RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 62 2f 8c 48 89 e5 e8 fb 31
e8 f8 8b 05 75 4f 8e 03 85 c0 7e 07 0f 00 2d 8a 61 66 00 fb f4 <5d> c3
90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
RAX: 0000000000000000 RBX: ffffffff8bde44c8 RCX: ffffffff88a11285
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2f6200
RBP: ffff88806b71fcc8 R08: fffffbfff185ec40 R09: fffffbfff185ec40
R10: 0000000000000001 R11: fffffbfff185ec40 R12: 0000000000000002
R13: ffffffff8be9d6e0 R14: 0000000000000000 R15: 0000000000000000
 arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
 default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
 arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
 default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
 cpuidle_idle_call kernel/sched/idle.c:153 [inline]
 do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
 cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
 start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243

Allocated by task 1:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:553
 kasan_slab_alloc+0x11/0x20 mm/kasan/kasan.c:490
 slab_post_alloc_hook mm/slab.h:445 [inline]
 slab_alloc_node mm/slub.c:2741 [inline]
 slab_alloc mm/slub.c:2749 [inline]
 kmem_cache_alloc+0xeb/0x280 mm/slub.c:2754
 kmem_cache_zalloc include/linux/slab.h:699 [inline]
 __kernfs_new_node+0xe2/0x6f0 fs/kernfs/dir.c:633
 kernfs_new_node+0x9a/0x120 fs/kernfs/dir.c:693
 __kernfs_create_file+0x5f/0x340 fs/kernfs/file.c:992
 sysfs_add_file_mode_ns+0x22a/0x4e0 fs/sysfs/file.c:306
 create_files fs/sysfs/group.c:63 [inline]
 internal_create_group+0x34e/0xc30 fs/sysfs/group.c:147
 sysfs_create_group fs/sysfs/group.c:173 [inline]
 sysfs_create_groups+0x9c/0x140 fs/sysfs/group.c:200
 driver_add_groups+0x3e/0x50 drivers/base/driver.c:129
 bus_add_driver+0x3a5/0x790 drivers/base/bus.c:684
 driver_register+0x1cd/0x410 drivers/base/driver.c:170
 __pci_register_driver+0x197/0x200 drivers/pci/pci-driver.c:1411
 cx88_audio_pci_driver_init+0x23/0x25 drivers/media/pci/cx88/cx88-alsa.c:
 1017
 do_one_initcall+0xe0/0x610 init/main.c:884
 do_initcall_level init/main.c:952 [inline]
 do_initcalls init/main.c:960 [inline]
 do_basic_setup init/main.c:978 [inline]
 kernel_init_freeable+0x4d0/0x592 init/main.c:1145
 kernel_init+0x18/0x190 init/main.c:1062
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415

Freed by task 0:
(stack is not available)

The buggy address belongs to the object at ffff8880608c0000
 which belongs to the cache kernfs_node_cache of size 160
The buggy address is located 0 bytes to the right of
 160-byte region [ffff8880608c0000, ffff8880608c00a0)
The buggy address belongs to the page:
page:ffffea0001823000 count:1 mapcount:0 mapping:ffff88806bed1e00
index:0x0 compound_mapcount: 0
flags: 0x100000000008100(slab|head)
raw: 0100000000008100 dead000000000100 dead000000000200 ffff88806bed1e00
raw: 0000000000000000 0000000000240024 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880608bff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8880608c0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880608c0080: 00 00 00 00 fc fc fc fc fc fc fc fc 00 00 00 00
                               ^
 ffff8880608c0100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8880608c0180: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
==================================================================

Link: https://lore.kernel.org/linux-media/1620723603-30912-1-git-send-email-zheyuma97@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/b2c2/flexcop-pci.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/pci/b2c2/flexcop-pci.c b/drivers/media/pci/b2c2/flexcop-pci.c
index a9d9520a94c6d..c9e6c7d663768 100644
--- a/drivers/media/pci/b2c2/flexcop-pci.c
+++ b/drivers/media/pci/b2c2/flexcop-pci.c
@@ -185,6 +185,8 @@ static irqreturn_t flexcop_pci_isr(int irq, void *dev_id)
 		dma_addr_t cur_addr =
 			fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
 		u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
+		if (cur_pos > fc_pci->dma[0].size * 2)
+			goto error;
 
 		deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, last_cur_pos: %08x ",
 				jiffies_to_usecs(jiffies - fc_pci->last_irq),
@@ -225,6 +227,7 @@ static irqreturn_t flexcop_pci_isr(int irq, void *dev_id)
 		ret = IRQ_NONE;
 	}
 
+error:
 	spin_unlock_irqrestore(&fc_pci->irq_lock, flags);
 	return ret;
 }
-- 
2.34.1

[PATCH AUTOSEL 5.10 020/116] EDAC/synopsys: Use the quirk for version instead of ddr version

[Sasha Levin]

From: Dinh Nguyen <dinguyen@kernel.org>

[ Upstream commit bd1d6da17c296bd005bfa656952710d256e77dd3 ]

Version 2.40a supports DDR_ECC_INTR_SUPPORT for a quirk, so use that
quirk to determine a call to setup_address_map().

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lkml.kernel.org/r/20211012190709.1504152-1-dinguyen@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/synopsys_edac.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 1a801a5d3b08b..92906b56b1a2b 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -1351,8 +1351,7 @@ static int mc_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (of_device_is_compatible(pdev->dev.of_node,
-				    "xlnx,zynqmp-ddrc-2.40a"))
+	if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT)
 		setup_address_map(priv);
 #endif
 
-- 
2.34.1

[PATCH AUTOSEL 5.10 021/116] ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART

[Sasha Levin]

From: Lukas Bulwahn <lukas.bulwahn@gmail.com>

[ Upstream commit b0100bce4ff82ec1ccd3c1f3d339fd2df6a81784 ]

Since commit 4b563a066611 ("ARM: imx: Remove imx21 support"), the config
DEBUG_IMX21_IMX27_UART is really only debug support for IMX27.

So, rename this option to DEBUG_IMX27_UART and adjust dependencies in
Kconfig and rename the definitions to IMX27 as further clean-up.

This issue was discovered with ./scripts/checkkconfigsymbols.py, which
reported that DEBUG_IMX21_IMX27_UART depends on the non-existing config
SOC_IMX21.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/Kconfig.debug            | 14 +++++++-------
 arch/arm/include/debug/imx-uart.h | 18 +++++++++---------
 2 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 8986a91a6f31b..dd1cf70353986 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -400,12 +400,12 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX25.
 
-	config DEBUG_IMX21_IMX27_UART
-		bool "i.MX21 and i.MX27 Debug UART"
-		depends on SOC_IMX21 || SOC_IMX27
+	config DEBUG_IMX27_UART
+		bool "i.MX27 Debug UART"
+		depends on SOC_IMX27
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX21 or i.MX27.
+		  on i.MX27.
 
 	config DEBUG_IMX28_UART
 		bool "i.MX28 Debug UART"
@@ -1523,7 +1523,7 @@ config DEBUG_IMX_UART_PORT
 	int "i.MX Debug UART Port Selection"
 	depends on DEBUG_IMX1_UART || \
 		   DEBUG_IMX25_UART || \
-		   DEBUG_IMX21_IMX27_UART || \
+		   DEBUG_IMX27_UART || \
 		   DEBUG_IMX31_UART || \
 		   DEBUG_IMX35_UART || \
 		   DEBUG_IMX50_UART || \
@@ -1591,12 +1591,12 @@ config DEBUG_LL_INCLUDE
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
-				 DEBUG_IMX21_IMX27_UART || \
+				 DEBUG_IMX27_UART || \
 				 DEBUG_IMX31_UART || \
 				 DEBUG_IMX35_UART || \
 				 DEBUG_IMX50_UART || \
 				 DEBUG_IMX51_UART || \
-				 DEBUG_IMX53_UART ||\
+				 DEBUG_IMX53_UART || \
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART || \
 				 DEBUG_IMX6SX_UART || \
diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h
index c8eb83d4b8964..3edbb3c5b42bf 100644
--- a/arch/arm/include/debug/imx-uart.h
+++ b/arch/arm/include/debug/imx-uart.h
@@ -11,13 +11,6 @@
 #define IMX1_UART_BASE_ADDR(n)	IMX1_UART##n##_BASE_ADDR
 #define IMX1_UART_BASE(n)	IMX1_UART_BASE_ADDR(n)
 
-#define IMX21_UART1_BASE_ADDR	0x1000a000
-#define IMX21_UART2_BASE_ADDR	0x1000b000
-#define IMX21_UART3_BASE_ADDR	0x1000c000
-#define IMX21_UART4_BASE_ADDR	0x1000d000
-#define IMX21_UART_BASE_ADDR(n)	IMX21_UART##n##_BASE_ADDR
-#define IMX21_UART_BASE(n)	IMX21_UART_BASE_ADDR(n)
-
 #define IMX25_UART1_BASE_ADDR	0x43f90000
 #define IMX25_UART2_BASE_ADDR	0x43f94000
 #define IMX25_UART3_BASE_ADDR	0x5000c000
@@ -26,6 +19,13 @@
 #define IMX25_UART_BASE_ADDR(n)	IMX25_UART##n##_BASE_ADDR
 #define IMX25_UART_BASE(n)	IMX25_UART_BASE_ADDR(n)
 
+#define IMX27_UART1_BASE_ADDR	0x1000a000
+#define IMX27_UART2_BASE_ADDR	0x1000b000
+#define IMX27_UART3_BASE_ADDR	0x1000c000
+#define IMX27_UART4_BASE_ADDR	0x1000d000
+#define IMX27_UART_BASE_ADDR(n)	IMX27_UART##n##_BASE_ADDR
+#define IMX27_UART_BASE(n)	IMX27_UART_BASE_ADDR(n)
+
 #define IMX31_UART1_BASE_ADDR	0x43f90000
 #define IMX31_UART2_BASE_ADDR	0x43f94000
 #define IMX31_UART3_BASE_ADDR	0x5000c000
@@ -112,10 +112,10 @@
 
 #ifdef CONFIG_DEBUG_IMX1_UART
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX1)
-#elif defined(CONFIG_DEBUG_IMX21_IMX27_UART)
-#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX21)
 #elif defined(CONFIG_DEBUG_IMX25_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX25)
+#elif defined(CONFIG_DEBUG_IMX27_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX27)
 #elif defined(CONFIG_DEBUG_IMX31_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX31)
 #elif defined(CONFIG_DEBUG_IMX35_UART)
-- 
2.34.1

[PATCH AUTOSEL 5.10 022/116] drm/amd/display: check top_pipe_to_program pointer

[Sasha Levin]

From: Yang Li <yang.lee@linux.alibaba.com>

[ Upstream commit a689e8d1f80012f90384ebac9dcfac4201f9f77e ]

Clang static analysis reports this error

drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2870:7: warning:
Dereference of null pointer [clang-analyzer-core.NullDereference]
                if
(top_pipe_to_program->stream_res.tg->funcs->lock_doublebuffer_enable) {
                    ^

top_pipe_to_program being NULL is caught as an error
But then it is used to report the error.

So add a check before using it.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 284ed1c8a35ac..93f5229c303e7 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -2436,7 +2436,8 @@ static void commit_planes_for_stream(struct dc *dc,
 	}
 
 	if ((update_type != UPDATE_TYPE_FAST) && stream->update_flags.bits.dsc_changed)
-		if (top_pipe_to_program->stream_res.tg->funcs->lock_doublebuffer_enable) {
+		if (top_pipe_to_program &&
+			top_pipe_to_program->stream_res.tg->funcs->lock_doublebuffer_enable) {
 			if (should_use_dmub_lock(stream->link)) {
 				union dmub_hw_lock_flags hw_locks = { 0 };
 				struct dmub_hw_lock_inst_flags inst_flags = { 0 };
-- 
2.34.1

[PATCH AUTOSEL 5.10 023/116] drm/amdgpu/display: set vblank_disable_immediate for DC

[Sasha Levin]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit 92020e81ddbeac351ea4a19bcf01743f32b9c800 ]

Disable vblanks immediately to save power.  I think this was
missed when we merged DC support.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1781
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c           | 1 -
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +++
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
index 2f70fdd6104f2..582055136cdbf 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
@@ -267,7 +267,6 @@ int amdgpu_irq_init(struct amdgpu_device *adev)
 	if (!amdgpu_device_has_dc_support(adev)) {
 		if (!adev->enable_virtual_display)
 			/* Disable vblank IRQs aggressively for power-saving */
-			/* XXX: can this be enabled for DC? */
 			adev_to_drm(adev)->vblank_disable_immediate = true;
 
 		r = drm_vblank_init(adev_to_drm(adev), adev->mode_info.num_crtc);
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index a5b6f36fe1d72..6c8f141103da4 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1069,6 +1069,9 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
 	adev_to_drm(adev)->mode_config.cursor_width = adev->dm.dc->caps.max_cursor_size;
 	adev_to_drm(adev)->mode_config.cursor_height = adev->dm.dc->caps.max_cursor_size;
 
+	/* Disable vblank IRQs aggressively for power-saving */
+	adev_to_drm(adev)->vblank_disable_immediate = true;
+
 	if (drm_vblank_init(adev_to_drm(adev), adev->dm.display_indexes_num)) {
 		DRM_ERROR(
 		"amdgpu: failed to initialize sw for display support.\n");
-- 
2.34.1

[PATCH AUTOSEL 5.10 024/116] soc: ti: pruss: fix referenced node in error message

[Sasha Levin]

From: Jan Kiszka <jan.kiszka@siemens.com>

[ Upstream commit 8aa35e0bb5eaa42bac415ad0847985daa7b4890c ]

So far, "(null)" is reported for the node that is missing clocks.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/d6e24953-ea89-fd1c-6e16-7a0142118054@siemens.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/ti/pruss.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
index cc0b4ad7a3d34..30695172a508f 100644
--- a/drivers/soc/ti/pruss.c
+++ b/drivers/soc/ti/pruss.c
@@ -131,7 +131,7 @@ static int pruss_clk_init(struct pruss *pruss, struct device_node *cfg_node)
 
 	clks_np = of_get_child_by_name(cfg_node, "clocks");
 	if (!clks_np) {
-		dev_err(dev, "%pOF is missing its 'clocks' node\n", clks_np);
+		dev_err(dev, "%pOF is missing its 'clocks' node\n", cfg_node);
 		return -ENODEV;
 	}
 
-- 
2.34.1

[PATCH AUTOSEL 5.10 025/116] mlxsw: pci: Add shutdown method in PCI driver

[Sasha Levin]

From: Danielle Ratson <danieller@nvidia.com>

[ Upstream commit c1020d3cf4752f61a6a413f632ea2ce2370e150d ]

On an arm64 platform with the Spectrum ASIC, after loading and executing
a new kernel via kexec, the following trace [1] is observed. This seems
to be caused by the fact that the device is not properly shutdown before
executing the new kernel.

Fix this by implementing a shutdown method which mirrors the remove
method, as recommended by the kexec maintainer [2][3].

[1]
BUG: Bad page state in process devlink pfn:22f73d
page:fffffe00089dcf40 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x2ffff00000000000()
raw: 2ffff00000000000 0000000000000000 ffffffff089d0201 0000000000000000
raw: 0000000000000000 0000000000000000 ffffffffffffffff 0000000000000000
page dumped because: nonzero _refcount
Modules linked in:
CPU: 1 PID: 16346 Comm: devlink Tainted: G B 5.8.0-rc6-custom-273020-gac6b365b1bf5 #44
Hardware name: Marvell Armada 7040 TX4810M (DT)
Call trace:
 dump_backtrace+0x0/0x1d0
 show_stack+0x1c/0x28
 dump_stack+0xbc/0x118
 bad_page+0xcc/0xf8
 check_free_page_bad+0x80/0x88
 __free_pages_ok+0x3f8/0x418
 __free_pages+0x38/0x60
 kmem_freepages+0x200/0x2a8
 slab_destroy+0x28/0x68
 slabs_destroy+0x60/0x90
 ___cache_free+0x1b4/0x358
 kfree+0xc0/0x1d0
 skb_free_head+0x2c/0x38
 skb_release_data+0x110/0x1a0
 skb_release_all+0x2c/0x38
 consume_skb+0x38/0x130
 __dev_kfree_skb_any+0x44/0x50
 mlxsw_pci_rdq_fini+0x8c/0xb0
 mlxsw_pci_queue_fini.isra.0+0x28/0x58
 mlxsw_pci_queue_group_fini+0x58/0x88
 mlxsw_pci_aqs_fini+0x2c/0x60
 mlxsw_pci_fini+0x34/0x50
 mlxsw_core_bus_device_unregister+0x104/0x1d0
 mlxsw_devlink_core_bus_device_reload_down+0x2c/0x48
 devlink_reload+0x44/0x158
 devlink_nl_cmd_reload+0x270/0x290
 genl_rcv_msg+0x188/0x2f0
 netlink_rcv_skb+0x5c/0x118
 genl_rcv+0x3c/0x50
 netlink_unicast+0x1bc/0x278
 netlink_sendmsg+0x194/0x390
 __sys_sendto+0xe0/0x158
 __arm64_sys_sendto+0x2c/0x38
 el0_svc_common.constprop.0+0x70/0x168
 do_el0_svc+0x28/0x88
 el0_sync_handler+0x88/0x190
 el0_sync+0x140/0x180

[2]
https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1195432.html

[3]
https://patchwork.kernel.org/project/linux-scsi/patch/20170212214920.28866-1-anton@ozlabs.org/#20116693

Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/pci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c
index ffaeda75eec42..72d5c77bcb949 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/pci.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c
@@ -1900,6 +1900,7 @@ int mlxsw_pci_driver_register(struct pci_driver *pci_driver)
 {
 	pci_driver->probe = mlxsw_pci_probe;
 	pci_driver->remove = mlxsw_pci_remove;
+	pci_driver->shutdown = mlxsw_pci_remove;
 	return pci_register_driver(pci_driver);
 }
 EXPORT_SYMBOL(mlxsw_pci_driver_register);
-- 
2.34.1

[PATCH AUTOSEL 5.10 026/116] drm/bridge: megachips: Ensure both bridges are probed before registration

[Sasha Levin]

From: Martyn Welch <martyn.welch@collabora.com>

[ Upstream commit 11632d4aa2b3f126790e81a4415d6c23103cf8bb ]

In the configuration used by the b850v3, the STDP2690 is used to read EDID
data whilst it's the STDP4028 which can detect when monitors are connected.

This can result in problems at boot with monitors connected when the
STDP4028 is probed first, a monitor is detected and an attempt is made to
read the EDID data before the STDP2690 has probed:

[    3.795721] Unable to handle kernel NULL pointer dereference at virtual address 00000018
[    3.803845] pgd = (ptrval)
[    3.806581] [00000018] *pgd=00000000
[    3.810180] Internal error: Oops: 5 [#1] SMP ARM
[    3.814813] Modules linked in:
[    3.817879] CPU: 0 PID: 64 Comm: kworker/u4:1 Not tainted 5.15.0 #1
[    3.824161] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[    3.830705] Workqueue: events_unbound deferred_probe_work_func
[    3.836565] PC is at stdp2690_get_edid+0x44/0x19c
[    3.841286] LR is at ge_b850v3_lvds_get_modes+0x2c/0x5c
[    3.846526] pc : [<805eae10>]    lr : [<805eb138>]    psr: 80000013
[    3.852802] sp : 81c359d0  ip : 7dbb550b  fp : 81c35a1c
[    3.858037] r10: 81c73840  r9 : 81c73894  r8 : 816d9800
[    3.863270] r7 : 00000000  r6 : 81c34000  r5 : 00000000  r4 : 810c35f0
[    3.869808] r3 : 80e3e294  r2 : 00000080  r1 : 00000cc0  r0 : 81401180
[    3.876349] Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[    3.883499] Control: 10c5387d  Table: 1000404a  DAC: 00000051
[    3.889254] Register r0 information: slab kmem_cache start 81401180 pointer offset 0
[    3.897034] Register r1 information: non-paged memory
[    3.902097] Register r2 information: non-paged memory
[    3.907160] Register r3 information: non-slab/vmalloc memory
[    3.912832] Register r4 information: non-slab/vmalloc memory
[    3.918503] Register r5 information: NULL pointer
[    3.923217] Register r6 information: non-slab/vmalloc memory
[    3.928887] Register r7 information: NULL pointer
[    3.933601] Register r8 information: slab kmalloc-1k start 816d9800 pointer offset 0 size 1024
[    3.942244] Register r9 information: slab kmalloc-2k start 81c73800 pointer offset 148 size 2048
[    3.951058] Register r10 information: slab kmalloc-2k start 81c73800 pointer offset 64 size 2048
[    3.959873] Register r11 information: non-slab/vmalloc memory
[    3.965632] Register r12 information: non-paged memory
[    3.970781] Process kworker/u4:1 (pid: 64, stack limit = 0x(ptrval))
[    3.977148] Stack: (0x81c359d0 to 0x81c36000)
[    3.981517] 59c0:                                     80b2b668 80b2b5bc 000002e2 0000034e
[    3.989712] 59e0: 81c35a8c 816d98e8 81c35a14 7dbb550b 805bfcd0 810c35f0 81c73840 824addc0
[    3.997906] 5a00: 00001000 816d9800 81c73894 81c73840 81c35a34 81c35a20 805eb138 805eadd8
[    4.006099] 5a20: 810c35f0 00000045 81c35adc 81c35a38 80594188 805eb118 80d7c788 80dd1848
[    4.014292] 5a40: 00000000 81c35a50 80dca950 811194d3 80dca7c4 80dca944 80dca91c 816d9800
[    4.022485] 5a60: 81c34000 81c760a8 816d9800 80c58c98 810c35f0 816d98e8 00001000 00001000
[    4.030678] 5a80: 00000000 00000000 8017712c 81c60000 00000002 00000001 00000000 00000000
[    4.038870] 5aa0: 816d9900 816d9900 00000000 7dbb550b 805c700c 00000008 826282c8 826282c8
[    4.047062] 5ac0: 00001000 81e1ce40 00001000 00000002 81c35bf4 81c35ae0 805d9694 80593fc0
[    4.055255] 5ae0: 8017a970 80179ad8 00000179 00000000 81c35bcc 81c35b00 80177108 8017a950
[    4.063447] 5b00: 00000000 81c35b10 81c34000 00000000 81004fd8 81010a38 00000000 00000059
[    4.071639] 5b20: 816d98d4 81fbb718 00000013 826282c8 8017a940 81c35b40 81134448 00000400
[    4.079831] 5b40: 00000178 00000000 e063b9c1 00000000 c2000049 00000040 00000000 00000008
[    4.088024] 5b60: 82628300 82628380 00000000 00000000 81c34000 00000000 81fbb700 82628340
[    4.096216] 5b80: 826283c0 00001000 00000000 00000010 816d9800 826282c0 801766f8 00000000
[    4.104408] 5ba0: 00000000 81004fd8 00000049 00000000 00000000 00000001 80dcf940 80178de4
[    4.112601] 5bc0: 81c35c0c 7dbb550b 80178de4 81fbb700 00000010 00000010 810c35f4 81e1ce40
[    4.120793] 5be0: 81c40908 0000000c 81c35c64 81c35bf8 805a7f18 805d94a0 81c35c3c 816d9800
[    4.128985] 5c00: 00000010 81c34000 81c35c2c 81c35c18 8012fce0 805be90c 81c35c3c 81c35c28
[    4.137178] 5c20: 805be90c 80173210 81fbb600 81fbb6b4 81c35c5c 7dbb550b 81c35c64 81fbb700
[    4.145370] 5c40: 816d9800 00000010 810c35f4 81e1ce40 81c40908 0000000c 81c35c84 81c35c68
[    4.153565] 5c60: 805a8c78 805a7ed0 816d9800 81fbb700 00000010 00000000 81c35cac 81c35c88
[    4.161758] 5c80: 805a8dc4 805a8b68 816d9800 00000000 816d9800 00000000 8179f810 810c42d0
[    4.169950] 5ca0: 81c35ccc 81c35cb0 805e47b0 805a8d18 824aa240 81e1ea80 81c40908 81126b60
[    4.178144] 5cc0: 81c35d14 81c35cd0 8060db1c 805e46cc 81c35d14 81c35ce0 80dd90f8 810c4d58
[    4.186338] 5ce0: 80dd90dc 81fe9740 fffffffe 81fe9740 81e1ea80 00000000 810c4d6c 80c4b95c
[    4.194531] 5d00: 80dd9a3c 815c6810 81c35d34 81c35d18 8060dc9c 8060d8fc 8246b440 815c6800
[    4.202724] 5d20: 815c6810 eefd8e00 81c35d44 81c35d38 8060dd80 8060dbec 81c35d6c 81c35d48
[    4.210918] 5d40: 805e98a4 8060dd70 00000000 815c6810 810c45b0 81126e90 81126e90 80dd9a3c
[    4.219112] 5d60: 81c35d8c 81c35d70 80619574 805e9808 815c6810 00000000 810c45b0 81126e90
[    4.227305] 5d80: 81c35db4 81c35d90 806168dc 80619514 80625df0 80623c80 815c6810 810c45b0
[    4.235498] 5da0: 81c35e6c 815c6810 81c35dec 81c35db8 80616d04 80616800 81c35de4 81c35dc8
[    4.243691] 5dc0: 808382b0 80b2f444 8116e310 8116e314 81c35e6c 815c6810 00000003 80dd9a3c
[    4.251884] 5de0: 81c35e14 81c35df0 80616ec8 80616c60 00000001 810c45b0 81c35e6c 815c6810
[    4.260076] 5e00: 00000001 80dd9a3c 81c35e34 81c35e18 80617338 80616e90 00000000 81c35e6c
[    4.268269] 5e20: 80617284 81c34000 81c35e64 81c35e38 80614730 80617290 81c35e64 8171a06c
[    4.276461] 5e40: 81e220b8 7dbb550b 815c6810 81c34000 815c6854 81126e90 81c35e9c 81c35e68
[    4.284654] 5e60: 8061673c 806146a8 8060f5e0 815c6810 00000001 7dbb550b 00000000 810c5080
[    4.292847] 5e80: 810c5320 815c6810 81126e90 00000000 81c35eac 81c35ea0 80617554 80616650
[    4.301040] 5ea0: 81c35ecc 81c35eb0 80615694 80617544 810c5080 810c5080 810c5094 81126e90
[    4.309233] 5ec0: 81c35efc 81c35ed0 80615c6c 8061560c 80615bc0 810c50c0 817eeb00 81412800
[    4.317425] 5ee0: 814c3000 00000000 814c300d 81119a60 81c35f3c 81c35f00 80141488 80615bcc
[    4.325618] 5f00: 81c60000 81c34000 81c35f24 81c35f18 80143078 817eeb00 81412800 817eeb18
[    4.333811] 5f20: 81412818 81003d00 00000088 81412800 81c35f74 81c35f40 80141a48 80141298
[    4.342005] 5f40: 81c35f74 81c34000 801481ac 817efa40 817efc00 801417d8 817eeb00 00000000
[    4.350199] 5f60: 815a7e7c 81c34000 81c35fac 81c35f78 80149b1c 801417e4 817efc20 817efc20
[    4.358391] 5f80: ffffe000 817efa40 801499a8 00000000 00000000 00000000 00000000 00000000
[    4.366583] 5fa0: 00000000 81c35fb0 80100130 801499b4 00000000 00000000 00000000 00000000
[    4.374774] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.382966] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[    4.391155] Backtrace:
[    4.393613] [<805eadcc>] (stdp2690_get_edid) from [<805eb138>] (ge_b850v3_lvds_get_modes+0x2c/0x5c)
[    4.402691]  r10:81c73840 r9:81c73894 r8:816d9800 r7:00001000 r6:824addc0 r5:81c73840
[    4.410534]  r4:810c35f0
[    4.413073] [<805eb10c>] (ge_b850v3_lvds_get_modes) from [<80594188>] (drm_helper_probe_single_connector_modes+0x1d4/0x84c)
[    4.424240]  r5:00000045 r4:810c35f0
[    4.427822] [<80593fb4>] (drm_helper_probe_single_connector_modes) from [<805d9694>] (drm_client_modeset_probe+0x200/0x1384)
[    4.439074]  r10:00000002 r9:00001000 r8:81e1ce40 r7:00001000 r6:826282c8 r5:826282c8
[    4.446917]  r4:00000008
[    4.449455] [<805d9494>] (drm_client_modeset_probe) from [<805a7f18>] (__drm_fb_helper_initial_config_and_unlock+0x54/0x5b4)
[    4.460713]  r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:00000010
[    4.468556]  r4:81fbb700
[    4.471095] [<805a7ec4>] (__drm_fb_helper_initial_config_and_unlock) from [<805a8c78>] (drm_fbdev_client_hotplug+0x11c/0x1b0)
[    4.482434]  r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:816d9800
[    4.490276]  r4:81fbb700
[    4.492814] [<805a8b5c>] (drm_fbdev_client_hotplug) from [<805a8dc4>] (drm_fbdev_generic_setup+0xb8/0x1a4)
[    4.502494]  r7:00000000 r6:00000010 r5:81fbb700 r4:816d9800
[    4.508160] [<805a8d0c>] (drm_fbdev_generic_setup) from [<805e47b0>] (imx_drm_bind+0xf0/0x130)
[    4.516805]  r7:810c42d0 r6:8179f810 r5:00000000 r4:816d9800
[    4.522474] [<805e46c0>] (imx_drm_bind) from [<8060db1c>] (try_to_bring_up_master+0x22c/0x2f0)
[    4.531116]  r7:81126b60 r6:81c40908 r5:81e1ea80 r4:824aa240
[    4.536783] [<8060d8f0>] (try_to_bring_up_master) from [<8060dc9c>] (__component_add+0xbc/0x184)
[    4.545597]  r10:815c6810 r9:80dd9a3c r8:80c4b95c r7:810c4d6c r6:00000000 r5:81e1ea80
[    4.553440]  r4:81fe9740
[    4.555980] [<8060dbe0>] (__component_add) from [<8060dd80>] (component_add+0x1c/0x20)
[    4.563921]  r7:eefd8e00 r6:815c6810 r5:815c6800 r4:8246b440
[    4.569589] [<8060dd64>] (component_add) from [<805e98a4>] (dw_hdmi_imx_probe+0xa8/0xe8)
[    4.577702] [<805e97fc>] (dw_hdmi_imx_probe) from [<80619574>] (platform_probe+0x6c/0xc8)
[    4.585908]  r9:80dd9a3c r8:81126e90 r7:81126e90 r6:810c45b0 r5:815c6810 r4:00000000
[    4.593662] [<80619508>] (platform_probe) from [<806168dc>] (really_probe+0xe8/0x460)
[    4.601524]  r7:81126e90 r6:810c45b0 r5:00000000 r4:815c6810
[    4.607191] [<806167f4>] (really_probe) from [<80616d04>] (__driver_probe_device+0xb0/0x230)
[    4.615658]  r7:815c6810 r6:81c35e6c r5:810c45b0 r4:815c6810
[    4.621326] [<80616c54>] (__driver_probe_device) from [<80616ec8>] (driver_probe_device+0x44/0xe0)
[    4.630313]  r9:80dd9a3c r8:00000003 r7:815c6810 r6:81c35e6c r5:8116e314 r4:8116e310
[    4.638068] [<80616e84>] (driver_probe_device) from [<80617338>] (__device_attach_driver+0xb4/0x12c)
[    4.647227]  r9:80dd9a3c r8:00000001 r7:815c6810 r6:81c35e6c r5:810c45b0 r4:00000001
[    4.654981] [<80617284>] (__device_attach_driver) from [<80614730>] (bus_for_each_drv+0x94/0xd8)
[    4.663794]  r7:81c34000 r6:80617284 r5:81c35e6c r4:00000000
[    4.669461] [<8061469c>] (bus_for_each_drv) from [<8061673c>] (__device_attach+0xf8/0x190)
[    4.677753]  r7:81126e90 r6:815c6854 r5:81c34000 r4:815c6810
[    4.683419] [<80616644>] (__device_attach) from [<80617554>] (device_initial_probe+0x1c/0x20)
[    4.691971]  r8:00000000 r7:81126e90 r6:815c6810 r5:810c5320 r4:810c5080
[    4.698681] [<80617538>] (device_initial_probe) from [<80615694>] (bus_probe_device+0x94/0x9c)
[    4.707318] [<80615600>] (bus_probe_device) from [<80615c6c>] (deferred_probe_work_func+0xac/0xf0)
[    4.716305]  r7:81126e90 r6:810c5094 r5:810c5080 r4:810c5080
[    4.721973] [<80615bc0>] (deferred_probe_work_func) from [<80141488>] (process_one_work+0x1fc/0x54c)
[    4.731139]  r10:81119a60 r9:814c300d r8:00000000 r7:814c3000 r6:81412800 r5:817eeb00
[    4.738981]  r4:810c50c0 r3:80615bc0
[    4.742563] [<8014128c>] (process_one_work) from [<80141a48>] (worker_thread+0x270/0x570)
[    4.750765]  r10:81412800 r9:00000088 r8:81003d00 r7:81412818 r6:817eeb18 r5:81412800
[    4.758608]  r4:817eeb00
[    4.761147] [<801417d8>] (worker_thread) from [<80149b1c>] (kthread+0x174/0x190)
[    4.768574]  r10:81c34000 r9:815a7e7c r8:00000000 r7:817eeb00 r6:801417d8 r5:817efc00
[    4.776417]  r4:817efa40
[    4.778955] [<801499a8>] (kthread) from [<80100130>] (ret_from_fork+0x14/0x24)
[    4.786201] Exception stack(0x81c35fb0 to 0x81c35ff8)
[    4.791266] 5fa0:                                     00000000 00000000 00000000 00000000
[    4.799459] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.807651] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    4.814279]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801499a8
[    4.822120]  r4:817efa40
[    4.824664] Code: e3a02080 e593001c e3a01d33 e3a05000 (e5979018)

Split the registration from the STDP4028 probe routine and only perform
registration once both the STDP4028 and STDP2690 have probed.

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
CC: Peter Senna Tschudin <peter.senna@gmail.com>
CC: Martyn Welch <martyn.welch@collabora.co.uk>
CC: Neil Armstrong <narmstrong@baylibre.com>
CC: Robert Foss <robert.foss@linaro.org>
CC: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
CC: Jonas Karlman <jonas@kwiboo.se>
CC: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/43552c3404e8fdf92d8bc5658fac24e9f03c2c57.1637836606.git.martyn.welch@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../bridge/megachips-stdpxxxx-ge-b850v3-fw.c  | 40 +++++++++++++------
 1 file changed, 28 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
index d2808c4a6fb1c..cce98bf2a4e73 100644
--- a/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
+++ b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
@@ -306,19 +306,10 @@ static void ge_b850v3_lvds_remove(void)
 	mutex_unlock(&ge_b850v3_lvds_dev_mutex);
 }
 
-static int stdp4028_ge_b850v3_fw_probe(struct i2c_client *stdp4028_i2c,
-				       const struct i2c_device_id *id)
+static int ge_b850v3_register(void)
 {
+	struct i2c_client *stdp4028_i2c = ge_b850v3_lvds_ptr->stdp4028_i2c;
 	struct device *dev = &stdp4028_i2c->dev;
-	int ret;
-
-	ret = ge_b850v3_lvds_init(dev);
-
-	if (ret)
-		return ret;
-
-	ge_b850v3_lvds_ptr->stdp4028_i2c = stdp4028_i2c;
-	i2c_set_clientdata(stdp4028_i2c, ge_b850v3_lvds_ptr);
 
 	/* drm bridge initialization */
 	ge_b850v3_lvds_ptr->bridge.funcs = &ge_b850v3_lvds_funcs;
@@ -343,6 +334,27 @@ static int stdp4028_ge_b850v3_fw_probe(struct i2c_client *stdp4028_i2c,
 			"ge-b850v3-lvds-dp", ge_b850v3_lvds_ptr);
 }
 
+static int stdp4028_ge_b850v3_fw_probe(struct i2c_client *stdp4028_i2c,
+				       const struct i2c_device_id *id)
+{
+	struct device *dev = &stdp4028_i2c->dev;
+	int ret;
+
+	ret = ge_b850v3_lvds_init(dev);
+
+	if (ret)
+		return ret;
+
+	ge_b850v3_lvds_ptr->stdp4028_i2c = stdp4028_i2c;
+	i2c_set_clientdata(stdp4028_i2c, ge_b850v3_lvds_ptr);
+
+	/* Only register after both bridges are probed */
+	if (!ge_b850v3_lvds_ptr->stdp2690_i2c)
+		return 0;
+
+	return ge_b850v3_register();
+}
+
 static int stdp4028_ge_b850v3_fw_remove(struct i2c_client *stdp4028_i2c)
 {
 	ge_b850v3_lvds_remove();
@@ -386,7 +398,11 @@ static int stdp2690_ge_b850v3_fw_probe(struct i2c_client *stdp2690_i2c,
 	ge_b850v3_lvds_ptr->stdp2690_i2c = stdp2690_i2c;
 	i2c_set_clientdata(stdp2690_i2c, ge_b850v3_lvds_ptr);
 
-	return 0;
+	/* Only register after both bridges are probed */
+	if (!ge_b850v3_lvds_ptr->stdp4028_i2c)
+		return 0;
+
+	return ge_b850v3_register();
 }
 
 static int stdp2690_ge_b850v3_fw_remove(struct i2c_client *stdp2690_i2c)
-- 
2.34.1

[PATCH AUTOSEL 5.10 027/116] tty: serial: imx: disable UCR4_OREN in .stop_rx() instead of .shutdown()

[Sasha Levin]

From: Fugang Duan <fugang.duan@nxp.com>

[ Upstream commit 028e083832b06fdeeb290e1e57dc1f6702c4c215 ]

The UCR4_OREN should be disabled before disabling the uart receiver in
.stop_rx() instead of in the .shutdown().

Otherwise, if we have the overrun error during the receiver disable
process, the overrun interrupt will keep trigging until we disable the
OREN interrupt in the .shutdown(), because the ORE status can only be
cleared when read the rx FIFO or reset the controller.  Although the
called time between the receiver disable and OREN disable in .shutdown()
is very short, there is still the risk of endless interrupt during this
short period of time. So here change to disable OREN before the receiver
been disabled in .stop_rx().

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20211125020349.4980-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/imx.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 28cc328ddb6eb..93cd8ad57f385 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -508,18 +508,21 @@ static void imx_uart_stop_tx(struct uart_port *port)
 static void imx_uart_stop_rx(struct uart_port *port)
 {
 	struct imx_port *sport = (struct imx_port *)port;
-	u32 ucr1, ucr2;
+	u32 ucr1, ucr2, ucr4;
 
 	ucr1 = imx_uart_readl(sport, UCR1);
 	ucr2 = imx_uart_readl(sport, UCR2);
+	ucr4 = imx_uart_readl(sport, UCR4);
 
 	if (sport->dma_is_enabled) {
 		ucr1 &= ~(UCR1_RXDMAEN | UCR1_ATDMAEN);
 	} else {
 		ucr1 &= ~UCR1_RRDYEN;
 		ucr2 &= ~UCR2_ATEN;
+		ucr4 &= ~UCR4_OREN;
 	}
 	imx_uart_writel(sport, ucr1, UCR1);
+	imx_uart_writel(sport, ucr4, UCR4);
 
 	ucr2 &= ~UCR2_RXEN;
 	imx_uart_writel(sport, ucr2, UCR2);
@@ -1576,7 +1579,7 @@ static void imx_uart_shutdown(struct uart_port *port)
 	imx_uart_writel(sport, ucr1, UCR1);
 
 	ucr4 = imx_uart_readl(sport, UCR4);
-	ucr4 &= ~(UCR4_OREN | UCR4_TCEN);
+	ucr4 &= ~UCR4_TCEN;
 	imx_uart_writel(sport, ucr4, UCR4);
 
 	spin_unlock_irqrestore(&sport->port.lock, flags);
-- 
2.34.1

[PATCH AUTOSEL 5.10 028/116] gpiolib: acpi: Do not set the IRQ type if the IRQ is already in use

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit bdfd6ab8fdccd8b138837efff66f4a1911496378 ]

If the IRQ is already in use, then acpi_dev_gpio_irq_get_by() really
should not change the type underneath the current owner.

I specifically hit an issue with this an a Chuwi Hi8 Super (CWI509) Bay
Trail tablet, when the Boot OS selection in the BIOS is set to Android.
In this case _STA for a MAX17047 ACPI I2C device wrongly returns 0xf and
the _CRS resources for this device include a GpioInt pointing to a GPIO
already in use by an _AEI handler, with a different type then specified
in the _CRS for the MAX17047 device. Leading to the acpi_dev_gpio_irq_get()
call done by the i2c-core-acpi.c code changing the type breaking the
_AEI handler.

Now this clearly is a bug in the DSDT of this tablet (in Android mode),
but in general calling irq_set_irq_type() on an IRQ which already is
in use seems like a bad idea.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib-acpi.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 6f11714ce0239..55e4f402ec8b6 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -969,10 +969,17 @@ int acpi_dev_gpio_irq_get_by(struct acpi_device *adev, const char *name, int ind
 			irq_flags = acpi_dev_get_irq_type(info.triggering,
 							  info.polarity);
 
-			/* Set type if specified and different than the current one */
-			if (irq_flags != IRQ_TYPE_NONE &&
-			    irq_flags != irq_get_trigger_type(irq))
-				irq_set_irq_type(irq, irq_flags);
+			/*
+			 * If the IRQ is not already in use then set type
+			 * if specified and different than the current one.
+			 */
+			if (can_request_irq(irq, irq_flags)) {
+				if (irq_flags != IRQ_TYPE_NONE &&
+				    irq_flags != irq_get_trigger_type(irq))
+					irq_set_irq_type(irq, irq_flags);
+			} else {
+				dev_dbg(&adev->dev, "IRQ %d already in use\n", irq);
+			}
 
 			return irq;
 		}
-- 
2.34.1

[PATCH AUTOSEL 5.10 029/116] HSI: core: Fix return freed object in hsi_new_client

[Sasha Levin]

From: Chengfeng Ye <cyeaa@connect.ust.hk>

[ Upstream commit a1ee1c08fcd5af03187dcd41dcab12fd5b379555 ]

cl is freed on error of calling device_register, but this
object is return later, which will cause uaf issue. Fix it
by return NULL on error.

Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hsi/hsi_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hsi/hsi_core.c b/drivers/hsi/hsi_core.c
index a5f92e2889cb8..a330f58d45fc6 100644
--- a/drivers/hsi/hsi_core.c
+++ b/drivers/hsi/hsi_core.c
@@ -102,6 +102,7 @@ struct hsi_client *hsi_new_client(struct hsi_port *port,
 	if (device_register(&cl->device) < 0) {
 		pr_err("hsi: failed to register client: %s\n", info->name);
 		put_device(&cl->device);
+		goto err;
 	}
 
 	return cl;
-- 
2.34.1

[PATCH AUTOSEL 5.10 030/116] crypto: jitter - consider 32 LSB for APT

[Sasha Levin]

From: Stephan Müller <smueller@chronox.de>

[ Upstream commit 552d03a223eda3df84526ab2c1f4d82e15eaee7a ]

The APT compares the current time stamp with a pre-set value. The
current code only considered the 4 LSB only. Yet, after reviews by
mathematicians of the user space Jitter RNG version >= 3.1.0, it was
concluded that the APT can be calculated on the 32 LSB of the time
delta. Thi change is applied to the kernel.

This fixes a bug where an AMD EPYC fails this test as its RDTSC value
contains zeros in the LSB. The most appropriate fix would have been to
apply a GCD calculation and divide the time stamp by the GCD. Yet, this
is a significant code change that will be considered for a future
update. Note, tests showed that constantly the GCD always was 32 on
these systems, i.e. the 5 LSB were always zero (thus failing the APT
since it only considered the 4 LSB for its calculation).

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/jitterentropy.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/crypto/jitterentropy.c b/crypto/jitterentropy.c
index 6e147c43fc186..37c4c308339e4 100644
--- a/crypto/jitterentropy.c
+++ b/crypto/jitterentropy.c
@@ -265,7 +265,6 @@ static int jent_stuck(struct rand_data *ec, __u64 current_delta)
 {
 	__u64 delta2 = jent_delta(ec->last_delta, current_delta);
 	__u64 delta3 = jent_delta(ec->last_delta2, delta2);
-	unsigned int delta_masked = current_delta & JENT_APT_WORD_MASK;
 
 	ec->last_delta = current_delta;
 	ec->last_delta2 = delta2;
@@ -274,7 +273,7 @@ static int jent_stuck(struct rand_data *ec, __u64 current_delta)
 	 * Insert the result of the comparison of two back-to-back time
 	 * deltas.
 	 */
-	jent_apt_insert(ec, delta_masked);
+	jent_apt_insert(ec, current_delta);
 
 	if (!current_delta || !delta2 || !delta3) {
 		/* RCT with a stuck bit */
-- 
2.34.1

[PATCH AUTOSEL 5.10 031/116] mwifiex: Fix skb_over_panic in mwifiex_usb_recv()

[Sasha Levin]

From: Zekun Shen <bruceshenzk@gmail.com>

[ Upstream commit 04d80663f67ccef893061b49ec8a42ff7045ae84 ]

Currently, with an unknown recv_type, mwifiex_usb_recv
just return -1 without restoring the skb. Next time
mwifiex_usb_rx_complete is invoked with the same skb,
calling skb_put causes skb_over_panic.

The bug is triggerable with a compromised/malfunctioning
usb device. After applying the patch, skb_over_panic
no longer shows up with the same input.

Attached is the panic report from fuzzing.
skbuff: skb_over_panic: text:000000003bf1b5fa
 len:2048 put:4 head:00000000dd6a115b data:000000000a9445d8
 tail:0x844 end:0x840 dev:<NULL>
kernel BUG at net/core/skbuff.c:109!
invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 PID: 198 Comm: in:imklog Not tainted 5.6.0 #60
RIP: 0010:skb_panic+0x15f/0x161
Call Trace:
 <IRQ>
 ? mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb]
 skb_put.cold+0x24/0x24
 mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb]
 __usb_hcd_giveback_urb+0x1e4/0x380
 usb_giveback_urb_bh+0x241/0x4f0
 ? __hrtimer_run_queues+0x316/0x740
 ? __usb_hcd_giveback_urb+0x380/0x380
 tasklet_action_common.isra.0+0x135/0x330
 __do_softirq+0x18c/0x634
 irq_exit+0x114/0x140
 smp_apic_timer_interrupt+0xde/0x380
 apic_timer_interrupt+0xf/0x20
 </IRQ>

Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YX4CqjfRcTa6bVL+@Zekuns-MBP-16.fios-router.home
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/usb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/usb.c b/drivers/net/wireless/marvell/mwifiex/usb.c
index 9736aa0ab7fd4..8f01fcbe93961 100644
--- a/drivers/net/wireless/marvell/mwifiex/usb.c
+++ b/drivers/net/wireless/marvell/mwifiex/usb.c
@@ -130,7 +130,8 @@ static int mwifiex_usb_recv(struct mwifiex_adapter *adapter,
 		default:
 			mwifiex_dbg(adapter, ERROR,
 				    "unknown recv_type %#x\n", recv_type);
-			return -1;
+			ret = -1;
+			goto exit_restore_skb;
 		}
 		break;
 	case MWIFIEX_USB_EP_DATA:
-- 
2.34.1

[PATCH AUTOSEL 5.10 032/116] rsi: Fix use-after-free in rsi_rx_done_handler()

[Sasha Levin]

From: Zekun Shen <bruceshenzk@gmail.com>

[ Upstream commit b07e3c6ebc0c20c772c0f54042e430acec2945c3 ]

When freeing rx_cb->rx_skb, the pointer is not set to NULL,
a later rsi_rx_done_handler call will try to read the freed
address.
This bug will very likley lead to double free, although
detected early as use-after-free bug.

The bug is triggerable with a compromised/malfunctional usb
device. After applying the patch, the same input no longer
triggers the use-after-free.

Attached is the kasan report from fuzzing.

BUG: KASAN: use-after-free in rsi_rx_done_handler+0x354/0x430 [rsi_usb]
Read of size 4 at addr ffff8880188e5930 by task modprobe/231
Call Trace:
 <IRQ>
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
 ? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
 __kasan_report.cold+0x37/0x7c
 ? dma_direct_unmap_page+0x90/0x110
 ? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
 kasan_report+0xe/0x20
 rsi_rx_done_handler+0x354/0x430 [rsi_usb]
 __usb_hcd_giveback_urb+0x1e4/0x380
 usb_giveback_urb_bh+0x241/0x4f0
 ? __usb_hcd_giveback_urb+0x380/0x380
 ? apic_timer_interrupt+0xa/0x20
 tasklet_action_common.isra.0+0x135/0x330
 __do_softirq+0x18c/0x634
 ? handle_irq_event+0xcd/0x157
 ? handle_edge_irq+0x1eb/0x7b0
 irq_exit+0x114/0x140
 do_IRQ+0x91/0x1e0
 common_interrupt+0xf/0xf
 </IRQ>

Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YXxQL/vIiYcZUu/j@10-18-43-117.dynapool.wireless.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/rsi/rsi_91x_usb.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index d881df9ebd0c3..7f34148c7dfe5 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -269,8 +269,12 @@ static void rsi_rx_done_handler(struct urb *urb)
 	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)rx_cb->data;
 	int status = -EINVAL;
 
+	if (!rx_cb->rx_skb)
+		return;
+
 	if (urb->status) {
 		dev_kfree_skb(rx_cb->rx_skb);
+		rx_cb->rx_skb = NULL;
 		return;
 	}
 
@@ -294,8 +298,10 @@ static void rsi_rx_done_handler(struct urb *urb)
 	if (rsi_rx_urb_submit(dev->priv, rx_cb->ep_num, GFP_ATOMIC))
 		rsi_dbg(ERR_ZONE, "%s: Failed in urb submission", __func__);
 
-	if (status)
+	if (status) {
 		dev_kfree_skb(rx_cb->rx_skb);
+		rx_cb->rx_skb = NULL;
+	}
 }
 
 static void rsi_rx_urb_kill(struct rsi_hw *adapter, u8 ep_num)
-- 
2.34.1

[PATCH AUTOSEL 5.10 033/116] rsi: Fix out-of-bounds read in rsi_read_pkt()

[Sasha Levin]

From: Zekun Shen <bruceshenzk@gmail.com>

[ Upstream commit f1cb3476e48b60c450ec3a1d7da0805bffc6e43a ]

rsi_get_* functions rely on an offset variable from usb
input. The size of usb input is RSI_MAX_RX_USB_PKT_SIZE(3000),
while 2-byte offset can be up to 0xFFFF. Thus a large offset
can cause out-of-bounds read.

The patch adds a bound checking condition when rcv_pkt_len is 0,
indicating it's USB. It's unclear whether this is triggerable
from other type of bus. The following check might help in that case.
offset > rcv_pkt_len - FRAME_DESC_SZ

The bug is trigerrable with conpromised/malfunctioning USB devices.
I tested the patch with the crashing input and got no more bug report.

Attached is the KASAN report from fuzzing.

BUG: KASAN: slab-out-of-bounds in rsi_read_pkt+0x42e/0x500 [rsi_91x]
Read of size 2 at addr ffff888019439fdb by task RX-Thread/227

CPU: 0 PID: 227 Comm: RX-Thread Not tainted 5.6.0 #66
Call Trace:
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? rsi_read_pkt+0x42e/0x500 [rsi_91x]
 ? rsi_read_pkt+0x42e/0x500 [rsi_91x]
 __kasan_report.cold+0x37/0x7c
 ? rsi_read_pkt+0x42e/0x500 [rsi_91x]
 kasan_report+0xe/0x20
 rsi_read_pkt+0x42e/0x500 [rsi_91x]
 rsi_usb_rx_thread+0x1b1/0x2fc [rsi_usb]
 ? rsi_probe+0x16a0/0x16a0 [rsi_usb]
 ? _raw_spin_lock_irqsave+0x7b/0xd0
 ? _raw_spin_trylock_bh+0x120/0x120
 ? __wake_up_common+0x10b/0x520
 ? rsi_probe+0x16a0/0x16a0 [rsi_usb]
 kthread+0x2b5/0x3b0
 ? kthread_create_on_node+0xd0/0xd0
 ret_from_fork+0x22/0x40

Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YXxXS4wgu2OsmlVv@10-18-43-117.dynapool.wireless.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/rsi/rsi_91x_main.c | 4 ++++
 drivers/net/wireless/rsi/rsi_91x_usb.c  | 1 -
 drivers/net/wireless/rsi/rsi_usb.h      | 2 ++
 3 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_main.c b/drivers/net/wireless/rsi/rsi_91x_main.c
index 8c638cfeac52f..fe8aed58ac088 100644
--- a/drivers/net/wireless/rsi/rsi_91x_main.c
+++ b/drivers/net/wireless/rsi/rsi_91x_main.c
@@ -23,6 +23,7 @@
 #include "rsi_common.h"
 #include "rsi_coex.h"
 #include "rsi_hal.h"
+#include "rsi_usb.h"
 
 u32 rsi_zone_enabled = /* INFO_ZONE |
 			INIT_ZONE |
@@ -168,6 +169,9 @@ int rsi_read_pkt(struct rsi_common *common, u8 *rx_pkt, s32 rcv_pkt_len)
 		frame_desc = &rx_pkt[index];
 		actual_length = *(u16 *)&frame_desc[0];
 		offset = *(u16 *)&frame_desc[2];
+		if (!rcv_pkt_len && offset >
+			RSI_MAX_RX_USB_PKT_SIZE - FRAME_DESC_SZ)
+			goto fail;
 
 		queueno = rsi_get_queueno(frame_desc, offset);
 		length = rsi_get_length(frame_desc, offset);
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index 7f34148c7dfe5..11388a1469621 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -328,7 +328,6 @@ static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num, gfp_t mem_flags)
 	struct sk_buff *skb;
 	u8 dword_align_bytes = 0;
 
-#define RSI_MAX_RX_USB_PKT_SIZE	3000
 	skb = dev_alloc_skb(RSI_MAX_RX_USB_PKT_SIZE);
 	if (!skb)
 		return -ENOMEM;
diff --git a/drivers/net/wireless/rsi/rsi_usb.h b/drivers/net/wireless/rsi/rsi_usb.h
index 8702f434b5699..ad88f8c70a351 100644
--- a/drivers/net/wireless/rsi/rsi_usb.h
+++ b/drivers/net/wireless/rsi/rsi_usb.h
@@ -44,6 +44,8 @@
 #define RSI_USB_BUF_SIZE	     4096
 #define RSI_USB_CTRL_BUF_SIZE	     0x04
 
+#define RSI_MAX_RX_USB_PKT_SIZE	3000
+
 struct rx_usb_ctrl_block {
 	u8 *data;
 	struct urb *rx_urb;
-- 
2.34.1

[PATCH AUTOSEL 5.10 034/116] ath11k: Avoid NULL ptr access during mgmt tx cleanup

[Sasha Levin]

From: Sriram R <quic_srirrama@quicinc.com>

[ Upstream commit a93789ae541c7d5c1c2a4942013adb6bcc5e2848 ]

Currently 'ar' reference is not added in skb_cb during
WMI mgmt tx. Though this is generally not used during tx completion
callbacks, on interface removal the remaining idr cleanup callback
uses the ar ptr from skb_cb from mgmt txmgmt_idr. Hence
fill them during tx call for proper usage.

Also free the skb which is missing currently in these
callbacks.

Crash_info:

[19282.489476] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[19282.489515] pgd = 91eb8000
[19282.496702] [00000000] *pgd=00000000
[19282.502524] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[19282.783728] PC is at ath11k_mac_vif_txmgmt_idr_remove+0x28/0xd8 [ath11k]
[19282.789170] LR is at idr_for_each+0xa0/0xc8

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00729-QCAHKSWPL_SILICONZ-3 v2
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1637832614-13831-1-git-send-email-quic_srirrama@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/mac.c | 35 +++++++++++++++------------
 1 file changed, 20 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 0924bc8b35205..4a4694ce7dc87 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <net/mac80211.h>
@@ -3878,23 +3879,32 @@ static int __ath11k_set_antenna(struct ath11k *ar, u32 tx_ant, u32 rx_ant)
 	return 0;
 }
 
-int ath11k_mac_tx_mgmt_pending_free(int buf_id, void *skb, void *ctx)
+static void ath11k_mac_tx_mgmt_free(struct ath11k *ar, int buf_id)
 {
-	struct sk_buff *msdu = skb;
+	struct sk_buff *msdu;
 	struct ieee80211_tx_info *info;
-	struct ath11k *ar = ctx;
-	struct ath11k_base *ab = ar->ab;
 
 	spin_lock_bh(&ar->txmgmt_idr_lock);
-	idr_remove(&ar->txmgmt_idr, buf_id);
+	msdu = idr_remove(&ar->txmgmt_idr, buf_id);
 	spin_unlock_bh(&ar->txmgmt_idr_lock);
-	dma_unmap_single(ab->dev, ATH11K_SKB_CB(msdu)->paddr, msdu->len,
+
+	if (!msdu)
+		return;
+
+	dma_unmap_single(ar->ab->dev, ATH11K_SKB_CB(msdu)->paddr, msdu->len,
 			 DMA_TO_DEVICE);
 
 	info = IEEE80211_SKB_CB(msdu);
 	memset(&info->status, 0, sizeof(info->status));
 
 	ieee80211_free_txskb(ar->hw, msdu);
+}
+
+int ath11k_mac_tx_mgmt_pending_free(int buf_id, void *skb, void *ctx)
+{
+	struct ath11k *ar = ctx;
+
+	ath11k_mac_tx_mgmt_free(ar, buf_id);
 
 	return 0;
 }
@@ -3903,17 +3913,10 @@ static int ath11k_mac_vif_txmgmt_idr_remove(int buf_id, void *skb, void *ctx)
 {
 	struct ieee80211_vif *vif = ctx;
 	struct ath11k_skb_cb *skb_cb = ATH11K_SKB_CB((struct sk_buff *)skb);
-	struct sk_buff *msdu = skb;
 	struct ath11k *ar = skb_cb->ar;
-	struct ath11k_base *ab = ar->ab;
 
-	if (skb_cb->vif == vif) {
-		spin_lock_bh(&ar->txmgmt_idr_lock);
-		idr_remove(&ar->txmgmt_idr, buf_id);
-		spin_unlock_bh(&ar->txmgmt_idr_lock);
-		dma_unmap_single(ab->dev, skb_cb->paddr, msdu->len,
-				 DMA_TO_DEVICE);
-	}
+	if (skb_cb->vif == vif)
+		ath11k_mac_tx_mgmt_free(ar, buf_id);
 
 	return 0;
 }
@@ -3928,6 +3931,8 @@ static int ath11k_mac_mgmt_tx_wmi(struct ath11k *ar, struct ath11k_vif *arvif,
 	int buf_id;
 	int ret;
 
+	ATH11K_SKB_CB(skb)->ar = ar;
+
 	spin_lock_bh(&ar->txmgmt_idr_lock);
 	buf_id = idr_alloc(&ar->txmgmt_idr, skb, 0,
 			   ATH11K_TX_MGMT_NUM_PENDING_MAX, GFP_ATOMIC);
-- 
2.34.1

[PATCH AUTOSEL 5.10 035/116] media: venus: avoid calling core_clk_setrate() concurrently during concurrent video sessions

[Sasha Levin]

From: Mansur Alisha Shaik <mansur@codeaurora.org>

[ Upstream commit 91f2b7d269e5c885c38c7ffa261f5276bd42f907 ]

In existing implementation, core_clk_setrate() is getting called
concurrently in concurrent video sessions. Before the previous call to
core_clk_setrate returns, new call to core_clk_setrate is invoked from
another video session running concurrently. This results in latest
calculated frequency being set (higher/lower) instead of actual frequency
required for that video session. It also results in stability crashes
mention below. These resources are specific to video core, hence keeping
under core lock would ensure that they are estimated for all running video
sessions and called once for the video core.

Crash logs:

[    1.900089] WARNING: CPU: 4 PID: 1 at drivers/opp/debugfs.c:33 opp_debug_remove_one+0x2c/0x48
[    1.908493] Modules linked in:
[    1.911524] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.10.67 #35 f8edb8c30cf2dd6838495dd9ef9be47af7f5f60c
[    1.921036] Hardware name: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform (DT)
[    1.928673] pstate: 60800009 (nZCv daif -PAN +UAO -TCO BTYPE=--)
[    1.934608] pc : opp_debug_remove_one+0x2c/0x48
[    1.939080] lr : opp_debug_remove_one+0x2c/0x48
[    1.943560] sp : ffffffc011d7b7f0
[    1.946836] pmr_save: 000000e0
[    1.949854] x29: ffffffc011d7b7f0 x28: ffffffc010733bbc
[    1.955104] x27: ffffffc010733ba8 x26: ffffff8083cedd00
[    1.960355] x25: 0000000000000001 x24: 0000000000000000
[    1.965603] x23: ffffff8083cc2878 x22: ffffff8083ceb900
[    1.970852] x21: ffffff8083ceb910 x20: ffffff8083cc2800
[    1.976101] x19: ffffff8083ceb900 x18: 00000000ffff0a10
[    1.981352] x17: ffffff80837a5620 x16: 00000000000000ec
[    1.986601] x15: ffffffc010519ad4 x14: 0000000000000003
[    1.991849] x13: 0000000000000004 x12: 0000000000000001
[    1.997100] x11: c0000000ffffdfff x10: 00000000ffffffff
[    2.002348] x9 : d2627c580300dc00 x8 : d2627c580300dc00
[    2.007596] x7 : 0720072007200720 x6 : ffffff80802ecf00
[    2.012845] x5 : 0000000000190004 x4 : 0000000000000000
[    2.018094] x3 : ffffffc011d7b478 x2 : ffffffc011d7b480
[    2.023343] x1 : 00000000ffffdfff x0 : 0000000000000017
[    2.028594] Call trace:
[    2.031022]  opp_debug_remove_one+0x2c/0x48
[    2.035160]  dev_pm_opp_put+0x94/0xb0
[    2.038780]  _opp_remove_all+0x7c/0xc8
[    2.042486]  _opp_remove_all_static+0x54/0x7c
[    2.046796]  dev_pm_opp_remove_table+0x74/0x98
[    2.051183]  devm_pm_opp_of_table_release+0x18/0x24
[    2.056001]  devm_action_release+0x1c/0x28
[    2.060053]  release_nodes+0x23c/0x2b8
[    2.063760]  devres_release_group+0xcc/0xd0
[    2.067900]  component_bind+0xac/0x168
[    2.071608]  component_bind_all+0x98/0x124
[    2.075664]  msm_drm_bind+0x1e8/0x678
[    2.079287]  try_to_bring_up_master+0x60/0x134
[    2.083674]  component_master_add_with_match+0xd8/0x120
[    2.088834]  msm_pdev_probe+0x20c/0x2a0
[    2.092629]  platform_drv_probe+0x9c/0xbc
[    2.096598]  really_probe+0x11c/0x46c
[    2.100217]  driver_probe_device+0x8c/0xf0
[    2.104270]  device_driver_attach+0x54/0x78
[    2.108407]  __driver_attach+0x48/0x148
[    2.112201]  bus_for_each_dev+0x88/0xd4
[    2.115998]  driver_attach+0x2c/0x38
[    2.119534]  bus_add_driver+0x10c/0x200
[    2.123330]  driver_register+0x6c/0x104
[    2.127122]  __platform_driver_register+0x4c/0x58
[    2.131767]  msm_drm_register+0x6c/0x70
[    2.135560]  do_one_initcall+0x64/0x23c
[    2.139357]  do_initcall_level+0xac/0x15c
[    2.143321]  do_initcalls+0x5c/0x9c
[    2.146778]  do_basic_setup+0x2c/0x38
[    2.150401]  kernel_init_freeable+0xf8/0x15c
[    2.154622]  kernel_init+0x1c/0x11c
[    2.158079]  ret_from_fork+0x10/0x30
[    2.161615] ---[ end trace a2cc45a0f784b212 ]---

[    2.166272] Removing OPP: 300000000

Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../media/platform/qcom/venus/pm_helpers.c    | 28 +++++++++----------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
index 2946547a0df4a..789f39ddb5742 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.c
+++ b/drivers/media/platform/qcom/venus/pm_helpers.c
@@ -147,14 +147,12 @@ static u32 load_per_type(struct venus_core *core, u32 session_type)
 	struct venus_inst *inst = NULL;
 	u32 mbs_per_sec = 0;
 
-	mutex_lock(&core->lock);
 	list_for_each_entry(inst, &core->instances, list) {
 		if (inst->session_type != session_type)
 			continue;
 
 		mbs_per_sec += load_per_instance(inst);
 	}
-	mutex_unlock(&core->lock);
 
 	return mbs_per_sec;
 }
@@ -203,14 +201,12 @@ static int load_scale_bw(struct venus_core *core)
 	struct venus_inst *inst = NULL;
 	u32 mbs_per_sec, avg, peak, total_avg = 0, total_peak = 0;
 
-	mutex_lock(&core->lock);
 	list_for_each_entry(inst, &core->instances, list) {
 		mbs_per_sec = load_per_instance(inst);
 		mbs_to_bw(inst, mbs_per_sec, &avg, &peak);
 		total_avg += avg;
 		total_peak += peak;
 	}
-	mutex_unlock(&core->lock);
 
 	/*
 	 * keep minimum bandwidth vote for "video-mem" path,
@@ -237,8 +233,9 @@ static int load_scale_v1(struct venus_inst *inst)
 	struct device *dev = core->dev;
 	u32 mbs_per_sec;
 	unsigned int i;
-	int ret;
+	int ret = 0;
 
+	mutex_lock(&core->lock);
 	mbs_per_sec = load_per_type(core, VIDC_SESSION_TYPE_ENC) +
 		      load_per_type(core, VIDC_SESSION_TYPE_DEC);
 
@@ -263,17 +260,19 @@ static int load_scale_v1(struct venus_inst *inst)
 	if (ret) {
 		dev_err(dev, "failed to set clock rate %lu (%d)\n",
 			freq, ret);
-		return ret;
+		goto exit;
 	}
 
 	ret = load_scale_bw(core);
 	if (ret) {
 		dev_err(dev, "failed to set bandwidth (%d)\n",
 			ret);
-		return ret;
+		goto exit;
 	}
 
-	return 0;
+exit:
+	mutex_unlock(&core->lock);
+	return ret;
 }
 
 static int core_get_v1(struct device *dev)
@@ -962,13 +961,13 @@ static int load_scale_v4(struct venus_inst *inst)
 	struct device *dev = core->dev;
 	unsigned long freq = 0, freq_core1 = 0, freq_core2 = 0;
 	unsigned long filled_len = 0;
-	int i, ret;
+	int i, ret = 0;
 
 	for (i = 0; i < inst->num_input_bufs; i++)
 		filled_len = max(filled_len, inst->payloads[i]);
 
 	if (inst->session_type == VIDC_SESSION_TYPE_DEC && !filled_len)
-		return 0;
+		return ret;
 
 	freq = calculate_inst_freq(inst, filled_len);
 	inst->clk_data.freq = freq;
@@ -984,7 +983,6 @@ static int load_scale_v4(struct venus_inst *inst)
 			freq_core2 += inst->clk_data.freq;
 		}
 	}
-	mutex_unlock(&core->lock);
 
 	freq = max(freq_core1, freq_core2);
 
@@ -1008,17 +1006,19 @@ static int load_scale_v4(struct venus_inst *inst)
 	if (ret) {
 		dev_err(dev, "failed to set clock rate %lu (%d)\n",
 			freq, ret);
-		return ret;
+		goto exit;
 	}
 
 	ret = load_scale_bw(core);
 	if (ret) {
 		dev_err(dev, "failed to set bandwidth (%d)\n",
 			ret);
-		return ret;
+		goto exit;
 	}
 
-	return 0;
+exit:
+	mutex_unlock(&core->lock);
+	return ret;
 }
 
 static const struct venus_pm_ops pm_ops_v4 = {
-- 
2.34.1

[PATCH AUTOSEL 5.10 036/116] ACPI / x86: Drop PWM2 device on Lenovo Yoga Book from always present table

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit d431dfb764b145369be820fcdfd50f2159b9bbc2 ]

It turns out that there is a WMI object which controls the PWM2 device
used for the keyboard backlight and that WMI object also provides some
other useful functionality.

The upcoming lenovo-yogabook-wmi driver will offer both backlight
control and the other functionality, so there no longer is a need
to have the lpss-pwm driver binding to PWM2 for backlight control;
and this is now actually undesirable because this will cause both
the WMI code and the lpss-pwm driver to poke at the same PWM
controller.

Drop the always-present quirk for the PWM2 ACPI-device, so that the
 lpss-pwm controller will no longer bind to it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/x86/utils.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index bdc1ba00aee9f..baaa44edc9441 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -54,10 +54,6 @@ static const struct always_present_id always_present_ids[] = {
 	ENTRY("80860F09", "1", X86_MATCH(ATOM_SILVERMONT), {}),
 	ENTRY("80862288", "1", X86_MATCH(ATOM_AIRMONT), {}),
 
-	/* Lenovo Yoga Book uses PWM2 for keyboard backlight control */
-	ENTRY("80862289", "2", X86_MATCH(ATOM_AIRMONT), {
-			DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9"),
-		}),
 	/*
 	 * The INT0002 device is necessary to clear wakeup interrupt sources
 	 * on Cherry Trail devices, without it we get nobody cared IRQ msgs.
-- 
2.34.1

[PATCH AUTOSEL 5.10 037/116] ACPI: Change acpi_device_always_present() into acpi_device_override_status()

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 1a68b346a2c9969c05e80a3b99a9ab160b5655c0 ]

Currently, acpi_bus_get_status() calls acpi_device_always_present() to
allow platform quirks to override the _STA return to report that a
device is present (status = ACPI_STA_DEFAULT) independent of the _STA
return.

In some cases it might also be useful to have the opposite functionality
and have a platform quirk which marks a device as not present (status = 0)
to work around ACPI table bugs.

Change acpi_device_always_present() into a more generic
acpi_device_override_status() function to allow this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/bus.c       |  4 +--
 drivers/acpi/x86/utils.c | 64 +++++++++++++++++++++++-----------------
 include/acpi/acpi_bus.h  |  5 ++--
 3 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index e317214aabec5..5e14288fcabe9 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -98,8 +98,8 @@ int acpi_bus_get_status(struct acpi_device *device)
 	acpi_status status;
 	unsigned long long sta;
 
-	if (acpi_device_always_present(device)) {
-		acpi_set_device_status(device, ACPI_STA_DEFAULT);
+	if (acpi_device_override_status(device, &sta)) {
+		acpi_set_device_status(device, sta);
 		return 0;
 	}
 
diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index baaa44edc9441..c6b0782dcced5 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -22,54 +22,63 @@
  * Some BIOS-es (temporarily) hide specific APCI devices to work around Windows
  * driver bugs. We use DMI matching to match known cases of this.
  *
- * We work around this by always reporting ACPI_STA_DEFAULT for these
- * devices. Note this MUST only be done for devices where this is safe.
+ * Likewise sometimes some not-actually present devices are sometimes
+ * reported as present, which may cause issues.
  *
- * This forcing of devices to be present is limited to specific CPU (SoC)
- * models both to avoid potentially causing trouble on other models and
- * because some HIDs are re-used on different SoCs for completely
- * different devices.
+ * We work around this by using the below quirk list to override the status
+ * reported by the _STA method with a fixed value (ACPI_STA_DEFAULT or 0).
+ * Note this MUST only be done for devices where this is safe.
+ *
+ * This status overriding is limited to specific CPU (SoC) models both to
+ * avoid potentially causing trouble on other models and because some HIDs
+ * are re-used on different SoCs for completely different devices.
  */
-struct always_present_id {
+struct override_status_id {
 	struct acpi_device_id hid[2];
 	struct x86_cpu_id cpu_ids[2];
 	struct dmi_system_id dmi_ids[2]; /* Optional */
 	const char *uid;
+	unsigned long long status;
 };
 
-#define X86_MATCH(model)	X86_MATCH_INTEL_FAM6_MODEL(model, NULL)
-
-#define ENTRY(hid, uid, cpu_models, dmi...) {				\
+#define ENTRY(status, hid, uid, cpu_model, dmi...) {			\
 	{ { hid, }, {} },						\
-	{ cpu_models, {} },						\
+	{ X86_MATCH_INTEL_FAM6_MODEL(cpu_model, NULL), {} },		\
 	{ { .matches = dmi }, {} },					\
 	uid,								\
+	status,								\
 }
 
-static const struct always_present_id always_present_ids[] = {
+#define PRESENT_ENTRY_HID(hid, uid, cpu_model, dmi...) \
+	ENTRY(ACPI_STA_DEFAULT, hid, uid, cpu_model, dmi)
+
+#define NOT_PRESENT_ENTRY_HID(hid, uid, cpu_model, dmi...) \
+	ENTRY(0, hid, uid, cpu_model, dmi)
+
+static const struct override_status_id override_status_ids[] = {
 	/*
 	 * Bay / Cherry Trail PWM directly poked by GPU driver in win10,
 	 * but Linux uses a separate PWM driver, harmless if not used.
 	 */
-	ENTRY("80860F09", "1", X86_MATCH(ATOM_SILVERMONT), {}),
-	ENTRY("80862288", "1", X86_MATCH(ATOM_AIRMONT), {}),
+	PRESENT_ENTRY_HID("80860F09", "1", ATOM_SILVERMONT, {}),
+	PRESENT_ENTRY_HID("80862288", "1", ATOM_AIRMONT, {}),
 
 	/*
 	 * The INT0002 device is necessary to clear wakeup interrupt sources
 	 * on Cherry Trail devices, without it we get nobody cared IRQ msgs.
 	 */
-	ENTRY("INT0002", "1", X86_MATCH(ATOM_AIRMONT), {}),
+	PRESENT_ENTRY_HID("INT0002", "1", ATOM_AIRMONT, {}),
 	/*
 	 * On the Dell Venue 11 Pro 7130 and 7139, the DSDT hides
 	 * the touchscreen ACPI device until a certain time
 	 * after _SB.PCI0.GFX0.LCD.LCD1._ON gets called has passed
 	 * *and* _STA has been called at least 3 times since.
 	 */
-	ENTRY("SYNA7500", "1", X86_MATCH(HASWELL_L), {
+	PRESENT_ENTRY_HID("SYNA7500", "1", HASWELL_L, {
 		DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 		DMI_MATCH(DMI_PRODUCT_NAME, "Venue 11 Pro 7130"),
 	      }),
-	ENTRY("SYNA7500", "1", X86_MATCH(HASWELL_L), {
+	PRESENT_ENTRY_HID("SYNA7500", "1", HASWELL_L, {
 		DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 		DMI_MATCH(DMI_PRODUCT_NAME, "Venue 11 Pro 7139"),
 	      }),
@@ -85,19 +94,19 @@ static const struct always_present_id always_present_ids[] = {
 	 * was copy-pasted from the GPD win, so it has a disabled KIOX000A
 	 * node which we should not enable, thus we also check the BIOS date.
 	 */
-	ENTRY("KIOX000A", "1", X86_MATCH(ATOM_AIRMONT), {
+	PRESENT_ENTRY_HID("KIOX000A", "1", ATOM_AIRMONT, {
 		DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
 		DMI_MATCH(DMI_BOARD_NAME, "Default string"),
 		DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
 		DMI_MATCH(DMI_BIOS_DATE, "02/21/2017")
 	      }),
-	ENTRY("KIOX000A", "1", X86_MATCH(ATOM_AIRMONT), {
+	PRESENT_ENTRY_HID("KIOX000A", "1", ATOM_AIRMONT, {
 		DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
 		DMI_MATCH(DMI_BOARD_NAME, "Default string"),
 		DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
 		DMI_MATCH(DMI_BIOS_DATE, "03/20/2017")
 	      }),
-	ENTRY("KIOX000A", "1", X86_MATCH(ATOM_AIRMONT), {
+	PRESENT_ENTRY_HID("KIOX000A", "1", ATOM_AIRMONT, {
 		DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
 		DMI_MATCH(DMI_BOARD_NAME, "Default string"),
 		DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
@@ -105,26 +114,27 @@ static const struct always_present_id always_present_ids[] = {
 	      }),
 };
 
-bool acpi_device_always_present(struct acpi_device *adev)
+bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *status)
 {
 	bool ret = false;
 	unsigned int i;
 
-	for (i = 0; i < ARRAY_SIZE(always_present_ids); i++) {
-		if (acpi_match_device_ids(adev, always_present_ids[i].hid))
+	for (i = 0; i < ARRAY_SIZE(override_status_ids); i++) {
+		if (acpi_match_device_ids(adev, override_status_ids[i].hid))
 			continue;
 
 		if (!adev->pnp.unique_id ||
-		    strcmp(adev->pnp.unique_id, always_present_ids[i].uid))
+		    strcmp(adev->pnp.unique_id, override_status_ids[i].uid))
 			continue;
 
-		if (!x86_match_cpu(always_present_ids[i].cpu_ids))
+		if (!x86_match_cpu(override_status_ids[i].cpu_ids))
 			continue;
 
-		if (always_present_ids[i].dmi_ids[0].matches[0].slot &&
-		    !dmi_check_system(always_present_ids[i].dmi_ids))
+		if (override_status_ids[i].dmi_ids[0].matches[0].slot &&
+		    !dmi_check_system(override_status_ids[i].dmi_ids))
 			continue;
 
+		*status = override_status_ids[i].status;
 		ret = true;
 		break;
 	}
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 6ad3b89a8a2e0..0f5366792d22e 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -605,9 +605,10 @@ int acpi_enable_wakeup_device_power(struct acpi_device *dev, int state);
 int acpi_disable_wakeup_device_power(struct acpi_device *dev);
 
 #ifdef CONFIG_X86
-bool acpi_device_always_present(struct acpi_device *adev);
+bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *status);
 #else
-static inline bool acpi_device_always_present(struct acpi_device *adev)
+static inline bool acpi_device_override_status(struct acpi_device *adev,
+					       unsigned long long *status)
 {
 	return false;
 }
-- 
2.34.1

[PATCH AUTOSEL 5.10 038/116] ACPI / x86: Allow specifying acpi_device_override_status() quirks by path

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit ba46e42e925b5d09b4e441f8de3db119cc7df58f ]

Not all ACPI-devices have a HID + UID, allow specifying quirks for
acpi_device_override_status() by path too.

Note this moves the path/HID+UID check to after the CPU + DMI checks
since the path lookup is somewhat costly.

This way this lookup is only done on devices where the other checks
match.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/x86/utils.c | 42 ++++++++++++++++++++++++++++++----------
 1 file changed, 32 insertions(+), 10 deletions(-)

diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index c6b0782dcced5..91bbc4b6b8035 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -38,22 +38,30 @@ struct override_status_id {
 	struct x86_cpu_id cpu_ids[2];
 	struct dmi_system_id dmi_ids[2]; /* Optional */
 	const char *uid;
+	const char *path;
 	unsigned long long status;
 };
 
-#define ENTRY(status, hid, uid, cpu_model, dmi...) {			\
+#define ENTRY(status, hid, uid, path, cpu_model, dmi...) {		\
 	{ { hid, }, {} },						\
 	{ X86_MATCH_INTEL_FAM6_MODEL(cpu_model, NULL), {} },		\
 	{ { .matches = dmi }, {} },					\
 	uid,								\
+	path,								\
 	status,								\
 }
 
 #define PRESENT_ENTRY_HID(hid, uid, cpu_model, dmi...) \
-	ENTRY(ACPI_STA_DEFAULT, hid, uid, cpu_model, dmi)
+	ENTRY(ACPI_STA_DEFAULT, hid, uid, NULL, cpu_model, dmi)
 
 #define NOT_PRESENT_ENTRY_HID(hid, uid, cpu_model, dmi...) \
-	ENTRY(0, hid, uid, cpu_model, dmi)
+	ENTRY(0, hid, uid, NULL, cpu_model, dmi)
+
+#define PRESENT_ENTRY_PATH(path, cpu_model, dmi...) \
+	ENTRY(ACPI_STA_DEFAULT, "", NULL, path, cpu_model, dmi)
+
+#define NOT_PRESENT_ENTRY_PATH(path, cpu_model, dmi...) \
+	ENTRY(0, "", NULL, path, cpu_model, dmi)
 
 static const struct override_status_id override_status_ids[] = {
 	/*
@@ -120,13 +128,6 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(override_status_ids); i++) {
-		if (acpi_match_device_ids(adev, override_status_ids[i].hid))
-			continue;
-
-		if (!adev->pnp.unique_id ||
-		    strcmp(adev->pnp.unique_id, override_status_ids[i].uid))
-			continue;
-
 		if (!x86_match_cpu(override_status_ids[i].cpu_ids))
 			continue;
 
@@ -134,6 +135,27 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s
 		    !dmi_check_system(override_status_ids[i].dmi_ids))
 			continue;
 
+		if (override_status_ids[i].path) {
+			struct acpi_buffer path = { ACPI_ALLOCATE_BUFFER, NULL };
+			bool match;
+
+			if (acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, &path))
+				continue;
+
+			match = strcmp((char *)path.pointer, override_status_ids[i].path) == 0;
+			kfree(path.pointer);
+
+			if (!match)
+				continue;
+		} else {
+			if (acpi_match_device_ids(adev, override_status_ids[i].hid))
+				continue;
+
+			if (!adev->pnp.unique_id ||
+			    strcmp(adev->pnp.unique_id, override_status_ids[i].uid))
+				continue;
+		}
+
 		*status = override_status_ids[i].status;
 		ret = true;
 		break;
-- 
2.34.1

[PATCH AUTOSEL 5.10 039/116] ACPI / x86: Add not-present quirk for the PCI0.SDHB.BRC1 device on the GPD win

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 57d2dbf710d832841872fb15ebb79429cab90fae ]

The GPD win and its sibling the GPD pocket (99% the same electronics in a
different case) use a PCI wifi card. But the ACPI tables on both variants
contain a bug where the SDIO MMC controller for SDIO wifi cards is enabled
despite this. This SDIO MMC controller has a PCI0.SDHB.BRC1 child-device
which _PS3 method sets a GPIO causing the PCI wifi card to turn off.

At the moment there is a pretty ugly kludge in the sdhci-acpi.c code,
just to work around the bug in the DSDT of this single design. This can
be solved cleaner/simply with a quirk overriding the _STA return of the
broken PCI0.SDHB.BRC1 PCI0.SDHB.BRC1 child with a status value of 0,
so that its power_manageable flag gets cleared, avoiding this problem.

Note that even though it is not used, the _STA method for the MMC
controller is deliberately not overridden. If the status of the MMC
controller were forced to 0 it would never get suspended, which would
cause these mini-laptops to not reach S0i3 level when suspended.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/x86/utils.c | 20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index 91bbc4b6b8035..3f9a162be84e3 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -94,9 +94,10 @@ static const struct override_status_id override_status_ids[] = {
 	/*
 	 * The GPD win BIOS dated 20170221 has disabled the accelerometer, the
 	 * drivers sometimes cause crashes under Windows and this is how the
-	 * manufacturer has solved this :| Note that the the DMI data is less
-	 * generic then it seems, a board_vendor of "AMI Corporation" is quite
-	 * rare and a board_name of "Default String" also is rare.
+	 * manufacturer has solved this :|  The DMI match may not seem unique,
+	 * but it is. In the 67000+ DMI decode dumps from linux-hardware.org
+	 * only 116 have board_vendor set to "AMI Corporation" and of those 116
+	 * only the GPD win and pocket entries' board_name is "Default string".
 	 *
 	 * Unfortunately the GPD pocket also uses these strings and its BIOS
 	 * was copy-pasted from the GPD win, so it has a disabled KIOX000A
@@ -120,6 +121,19 @@ static const struct override_status_id override_status_ids[] = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
 		DMI_MATCH(DMI_BIOS_DATE, "05/25/2017")
 	      }),
+
+	/*
+	 * The GPD win/pocket have a PCI wifi card, but its DSDT has the SDIO
+	 * mmc controller enabled and that has a child-device which _PS3
+	 * method sets a GPIO causing the PCI wifi card to turn off.
+	 * See above remark about uniqueness of the DMI match.
+	 */
+	NOT_PRESENT_ENTRY_PATH("\\_SB_.PCI0.SDHB.BRC1", ATOM_AIRMONT, {
+		DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+		DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
+		DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
+		DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
+	      }),
 };
 
 bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *status)
-- 
2.34.1

[PATCH AUTOSEL 5.10 040/116] arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node

[Sasha Levin]

From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit 4d3984906397581dc0ccb6a02bf16b6ff82c9192 ]

Fix 'dtbs_check' in serdes_ln_ctrl (serdes-ln-ctrl@4080) node by
changing the node name to mux-controller@4080.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211126084555.17797-2-kishon@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 5832ad830ed14..1ab9f9604af6c 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -25,7 +25,7 @@ scm_conf: scm-conf@100000 {
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0x00100000 0x1c000>;
 
-		serdes_ln_ctrl: serdes-ln-ctrl@4080 {
+		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "mmio-mux";
 			#mux-control-cells = <1>;
 			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
-- 
2.34.1

[PATCH AUTOSEL 5.10 041/116] usb: uhci: add aspeed ast2600 uhci support

[Sasha Levin]

From: Neal Liu <neal_liu@aspeedtech.com>

[ Upstream commit 554abfe2eadec97d12c71d4a69da1518478f69eb ]

Enable ast2600 uhci quirks.

Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Link: https://lore.kernel.org/r/20211126100021.2331024-1-neal_liu@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/uhci-platform.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 70dbd95c3f063..be9e9db7cad10 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -113,7 +113,8 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
 				num_ports);
 		}
 		if (of_device_is_compatible(np, "aspeed,ast2400-uhci") ||
-		    of_device_is_compatible(np, "aspeed,ast2500-uhci")) {
+		    of_device_is_compatible(np, "aspeed,ast2500-uhci") ||
+		    of_device_is_compatible(np, "aspeed,ast2600-uhci")) {
 			uhci->is_aspeed = 1;
 			dev_info(&pdev->dev,
 				 "Enabled Aspeed implementation workarounds\n");
-- 
2.34.1

[PATCH AUTOSEL 5.10 042/116] floppy: Add max size check for user space request

[Sasha Levin]

From: Xiongwei Song <sxwjean@gmail.com>

[ Upstream commit 545a32498c536ee152331cd2e7d2416aa0f20e01 ]

We need to check the max request size that is from user space before
allocating pages. If the request size exceeds the limit, return -EINVAL.
This check can avoid the warning below from page allocator.

WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 current_gfp_context include/linux/sched/mm.h:195 [inline]
WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 __alloc_pages+0x45d/0x500 mm/page_alloc.c:5356
Modules linked in:
CPU: 3 PID: 16525 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
RIP: 0010:__alloc_pages+0x45d/0x500 mm/page_alloc.c:5344
Code: be c9 00 00 00 48 c7 c7 20 4a 97 89 c6 05 62 32 a7 0b 01 e8 74 9a 42 07 e9 6a ff ff ff 0f 0b e9 a0 fd ff ff 40 80 e5 3f eb 88 <0f> 0b e9 18 ff ff ff 4c 89 ef 44 89 e6 45 31 ed e8 1e 76 ff ff e9
RSP: 0018:ffffc90023b87850 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 1ffff92004770f0b RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000033 RDI: 0000000000010cc1
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
R10: ffffffff81bb4686 R11: 0000000000000001 R12: ffffffff902c1960
R13: 0000000000000033 R14: 0000000000000000 R15: ffff88804cf64a30
FS:  0000000000000000(0000) GS:ffff88802cd00000(0063) knlGS:00000000f44b4b40
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 000000002c921000 CR3: 000000004f507000 CR4: 0000000000150ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191
 __get_free_pages+0x8/0x40 mm/page_alloc.c:5418
 raw_cmd_copyin drivers/block/floppy.c:3113 [inline]
 raw_cmd_ioctl drivers/block/floppy.c:3160 [inline]
 fd_locked_ioctl+0x12e5/0x2820 drivers/block/floppy.c:3528
 fd_ioctl drivers/block/floppy.c:3555 [inline]
 fd_compat_ioctl+0x891/0x1b60 drivers/block/floppy.c:3869
 compat_blkdev_ioctl+0x3b8/0x810 block/ioctl.c:662
 __do_compat_sys_ioctl+0x1c7/0x290 fs/ioctl.c:972
 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
 __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178
 do_fast_syscall_32+0x2f/0x70 arch/x86/entry/common.c:203
 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c

Reported-by: syzbot+23a02c7df2cf2bc93fa2@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20211116131033.27685-1-sxwjean@me.com
Signed-off-by: Xiongwei Song <sxwjean@gmail.com>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/floppy.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 7df79ae6b0a1e..eabaaff6360ae 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3169,6 +3169,8 @@ static void raw_cmd_free(struct floppy_raw_cmd **ptr)
 	}
 }
 
+#define MAX_LEN (1UL << MAX_ORDER << PAGE_SHIFT)
+
 static int raw_cmd_copyin(int cmd, void __user *param,
 				 struct floppy_raw_cmd **rcmd)
 {
@@ -3198,7 +3200,7 @@ static int raw_cmd_copyin(int cmd, void __user *param,
 	ptr->resultcode = 0;
 
 	if (ptr->flags & (FD_RAW_READ | FD_RAW_WRITE)) {
-		if (ptr->length <= 0)
+		if (ptr->length <= 0 || ptr->length >= MAX_LEN)
 			return -EINVAL;
 		ptr->kernel_data = (char *)fd_dma_mem_alloc(ptr->length);
 		fallback_on_nodma_alloc(&ptr->kernel_data, ptr->length);
-- 
2.34.1

[PATCH AUTOSEL 5.10 043/116] x86/mm: Flush global TLB when switching to trampoline page-table

[Sasha Levin]

From: Joerg Roedel <jroedel@suse.de>

[ Upstream commit 71d5049b053876afbde6c3273250b76935494ab2 ]

Move the switching code into a function so that it can be re-used and
add a global TLB flush. This makes sure that usage of memory which is
not mapped in the trampoline page-table is reliably caught.

Also move the clearing of CR4.PCIDE before the CR3 switch because the
cr4_clear_bits() function will access data not mapped into the
trampoline page-table.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211202153226.22946-4-joro@8bytes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/realmode.h |  1 +
 arch/x86/kernel/reboot.c        | 12 ++----------
 arch/x86/realmode/init.c        | 26 ++++++++++++++++++++++++++
 3 files changed, 29 insertions(+), 10 deletions(-)

diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h
index 5db5d083c8732..331474b150f16 100644
--- a/arch/x86/include/asm/realmode.h
+++ b/arch/x86/include/asm/realmode.h
@@ -89,6 +89,7 @@ static inline void set_real_mode_mem(phys_addr_t mem)
 }
 
 void reserve_real_mode(void);
+void load_trampoline_pgtable(void);
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 798a6f73f8946..df3514835b356 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -113,17 +113,9 @@ void __noreturn machine_real_restart(unsigned int type)
 	spin_unlock(&rtc_lock);
 
 	/*
-	 * Switch back to the initial page table.
+	 * Switch to the trampoline page table.
 	 */
-#ifdef CONFIG_X86_32
-	load_cr3(initial_page_table);
-#else
-	write_cr3(real_mode_header->trampoline_pgd);
-
-	/* Exiting long mode will fail if CR4.PCIDE is set. */
-	if (boot_cpu_has(X86_FEATURE_PCID))
-		cr4_clear_bits(X86_CR4_PCIDE);
-#endif
+	load_trampoline_pgtable();
 
 	/* Jump to the identity-mapped low memory code */
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/realmode/init.c b/arch/x86/realmode/init.c
index 3313bffbecd4d..1a702c6a226ec 100644
--- a/arch/x86/realmode/init.c
+++ b/arch/x86/realmode/init.c
@@ -17,6 +17,32 @@ u32 *trampoline_cr4_features;
 /* Hold the pgd entry used on booting additional CPUs */
 pgd_t trampoline_pgd_entry;
 
+void load_trampoline_pgtable(void)
+{
+#ifdef CONFIG_X86_32
+	load_cr3(initial_page_table);
+#else
+	/*
+	 * This function is called before exiting to real-mode and that will
+	 * fail with CR4.PCIDE still set.
+	 */
+	if (boot_cpu_has(X86_FEATURE_PCID))
+		cr4_clear_bits(X86_CR4_PCIDE);
+
+	write_cr3(real_mode_header->trampoline_pgd);
+#endif
+
+	/*
+	 * The CR3 write above will not flush global TLB entries.
+	 * Stale, global entries from previous page tables may still be
+	 * present.  Flush those stale entries.
+	 *
+	 * This ensures that memory accessed while running with
+	 * trampoline_pgd is *actually* mapped into trampoline_pgd.
+	 */
+	__flush_tlb_all();
+}
+
 void __init reserve_real_mode(void)
 {
 	phys_addr_t mem;
-- 
2.34.1

[PATCH AUTOSEL 5.10 044/116] drm: rcar-du: Fix CRTC timings when CMM is used

[Sasha Levin]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

[ Upstream commit f0ce591dc9a97067c6e783a2eaccd22c5476144d ]

When the CMM is enabled, an offset of 25 pixels must be subtracted from
the HDS (horizontal display start) and HDE (horizontal display end)
registers. Fix the timings calculation, and take this into account in
the mode validation.

This fixes a visible horizontal offset in the image with VGA monitors.
HDMI monitors seem to be generally more tolerant to incorrect timings,
but may be affected too.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index 1b9738e44909d..065604c5837de 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -215,6 +215,7 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
 	const struct drm_display_mode *mode = &rcrtc->crtc.state->adjusted_mode;
 	struct rcar_du_device *rcdu = rcrtc->dev;
 	unsigned long mode_clock = mode->clock * 1000;
+	unsigned int hdse_offset;
 	u32 dsmr;
 	u32 escr;
 
@@ -298,10 +299,15 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
 	     | DSMR_DIPM_DISP | DSMR_CSPM;
 	rcar_du_crtc_write(rcrtc, DSMR, dsmr);
 
+	hdse_offset = 19;
+	if (rcrtc->group->cmms_mask & BIT(rcrtc->index % 2))
+		hdse_offset += 25;
+
 	/* Display timings */
-	rcar_du_crtc_write(rcrtc, HDSR, mode->htotal - mode->hsync_start - 19);
+	rcar_du_crtc_write(rcrtc, HDSR, mode->htotal - mode->hsync_start -
+					hdse_offset);
 	rcar_du_crtc_write(rcrtc, HDER, mode->htotal - mode->hsync_start +
-					mode->hdisplay - 19);
+					mode->hdisplay - hdse_offset);
 	rcar_du_crtc_write(rcrtc, HSWR, mode->hsync_end -
 					mode->hsync_start - 1);
 	rcar_du_crtc_write(rcrtc, HCR,  mode->htotal - 1);
@@ -831,6 +837,7 @@ rcar_du_crtc_mode_valid(struct drm_crtc *crtc,
 	struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
 	struct rcar_du_device *rcdu = rcrtc->dev;
 	bool interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE;
+	unsigned int min_sync_porch;
 	unsigned int vbp;
 
 	if (interlaced && !rcar_du_has(rcdu, RCAR_DU_FEATURE_INTERLACED))
@@ -838,9 +845,14 @@ rcar_du_crtc_mode_valid(struct drm_crtc *crtc,
 
 	/*
 	 * The hardware requires a minimum combined horizontal sync and back
-	 * porch of 20 pixels and a minimum vertical back porch of 3 lines.
+	 * porch of 20 pixels (when CMM isn't used) or 45 pixels (when CMM is
+	 * used), and a minimum vertical back porch of 3 lines.
 	 */
-	if (mode->htotal - mode->hsync_start < 20)
+	min_sync_porch = 20;
+	if (rcrtc->group->cmms_mask & BIT(rcrtc->index % 2))
+		min_sync_porch += 25;
+
+	if (mode->htotal - mode->hsync_start < min_sync_porch)
 		return MODE_HBLANK_NARROW;
 
 	vbp = (mode->vtotal - mode->vsync_end) / (interlaced ? 2 : 1);
-- 
2.34.1

[PATCH AUTOSEL 5.10 045/116] media: uvcvideo: Increase UVC_CTRL_CONTROL_TIMEOUT to 5 seconds.

[Sasha Levin]

From: James Hilliard <james.hilliard1@gmail.com>

[ Upstream commit c8ed7d2f614cd8b315981d116c7a2fb01829500d ]

Some uvc devices appear to require the maximum allowed USB timeout
for GET_CUR/SET_CUR requests.

So lets just bump the UVC control timeout to 5 seconds which is the
same as the usb ctrl get/set defaults:
USB_CTRL_GET_TIMEOUT 5000
USB_CTRL_SET_TIMEOUT 5000

It fixes the following runtime warnings:
   Failed to query (GET_CUR) UVC control 11 on unit 2: -110 (exp. 1).
   Failed to query (SET_CUR) UVC control 3 on unit 2: -110 (exp. 2).

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/uvc/uvcvideo.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
index a3dfacf069c44..c884020b28784 100644
--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
@@ -183,7 +183,7 @@
 /* Maximum status buffer size in bytes of interrupt URB. */
 #define UVC_MAX_STATUS_SIZE	16
 
-#define UVC_CTRL_CONTROL_TIMEOUT	500
+#define UVC_CTRL_CONTROL_TIMEOUT	5000
 #define UVC_CTRL_STREAMING_TIMEOUT	5000
 
 /* Maximum allowed number of control mappings per device */
-- 
2.34.1

[PATCH AUTOSEL 5.10 046/116] media: rcar-vin: Update format alignment constraints

[Sasha Levin]

From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

[ Upstream commit da6911f330d40cfe115a37249e47643eff555e82 ]

This change fixes two issues with the size constraints for buffers.

- There is no width alignment constraint for RGB formats. Prior to this
  change they were treated as YUV and as a result were more restricted
  than needed. Add a new check to differentiate between the two.

- The minimum width and height supported is 5x2, not 2x4, this is an
  artifact from the driver's soc-camera days. Fix this incorrect
  assumption.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 3e7a3ae2a6b97..0bbe6f9f92062 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -175,20 +175,27 @@ static void rvin_format_align(struct rvin_dev *vin, struct v4l2_pix_format *pix)
 		break;
 	}
 
-	/* HW limit width to a multiple of 32 (2^5) for NV12/16 else 2 (2^1) */
+	/* Hardware limits width alignment based on format. */
 	switch (pix->pixelformat) {
+	/* Multiple of 32 (2^5) for NV12/16. */
 	case V4L2_PIX_FMT_NV12:
 	case V4L2_PIX_FMT_NV16:
 		walign = 5;
 		break;
-	default:
+	/* Multiple of 2 (2^1) for YUV. */
+	case V4L2_PIX_FMT_YUYV:
+	case V4L2_PIX_FMT_UYVY:
 		walign = 1;
 		break;
+	/* No multiple for RGB. */
+	default:
+		walign = 0;
+		break;
 	}
 
 	/* Limit to VIN capabilities */
-	v4l_bound_align_image(&pix->width, 2, vin->info->max_width, walign,
-			      &pix->height, 4, vin->info->max_height, 2, 0);
+	v4l_bound_align_image(&pix->width, 5, vin->info->max_width, walign,
+			      &pix->height, 2, vin->info->max_height, 0, 0);
 
 	pix->bytesperline = rvin_format_bytesperline(vin, pix);
 	pix->sizeimage = rvin_format_sizeimage(pix);
-- 
2.34.1

[PATCH AUTOSEL 5.10 047/116] media: saa7146: hexium_orion: Fix a NULL pointer dereference in hexium_attach()

[Sasha Levin]

From: Zhou Qingyang <zhou1615@umn.edu>

[ Upstream commit 348df8035301dd212e3cc2860efe4c86cb0d3303 ]

In hexium_attach(dev, info), saa7146_vv_init() is called to allocate
a new memory for dev->vv_data. In hexium_detach(), saa7146_vv_release()
will be called and there is a dereference of dev->vv_data in
saa7146_vv_release(), which could lead to a NULL pointer dereference
on failure of saa7146_vv_init() according to the following logic.

Both hexium_attach() and hexium_detach() are callback functions of
the variable 'extension', so there exists a possible call chain directly
from hexium_attach() to hexium_detach():

hexium_attach(dev, info) -- fail to alloc memory to dev->vv_data
	|		    		in saa7146_vv_init().
	|
	|
hexium_detach() -- a dereference of dev->vv_data in saa7146_vv_release()

Fix this bug by adding a check of saa7146_vv_init().

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_VIDEO_HEXIUM_ORION=m show no new warnings,
and our static analyzer no longer warns about this code.

Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/saa7146/hexium_orion.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/media/pci/saa7146/hexium_orion.c b/drivers/media/pci/saa7146/hexium_orion.c
index 39d14c179d229..2eb4bee16b71f 100644
--- a/drivers/media/pci/saa7146/hexium_orion.c
+++ b/drivers/media/pci/saa7146/hexium_orion.c
@@ -355,10 +355,16 @@ static struct saa7146_ext_vv vv_data;
 static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
 {
 	struct hexium *hexium = (struct hexium *) dev->ext_priv;
+	int ret;
 
 	DEB_EE("\n");
 
-	saa7146_vv_init(dev, &vv_data);
+	ret = saa7146_vv_init(dev, &vv_data);
+	if (ret) {
+		pr_err("Error in saa7146_vv_init()\n");
+		return ret;
+	}
+
 	vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
 	vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
 	vv_data.vid_ops.vidioc_s_input = vidioc_s_input;
-- 
2.34.1

[PATCH AUTOSEL 5.10 048/116] media: m920x: don't use stack on USB reads

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit a2ab06d7c4d6bfd0b545a768247a70463e977e27 ]

Using stack-allocated pointers for USB message data don't work.
This driver is almost OK with that, except for the I2C read
logic.

Fix it by using a temporary read buffer, just like on all other
calls to m920x_read().

Link: https://lore.kernel.org/all/ccc99e48-de4f-045e-0fe4-61e3118e3f74@mida.se/
Reported-by: rkardell@mida.se
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/m920x.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/media/usb/dvb-usb/m920x.c b/drivers/media/usb/dvb-usb/m920x.c
index 4bb5b82599a79..691e05833db19 100644
--- a/drivers/media/usb/dvb-usb/m920x.c
+++ b/drivers/media/usb/dvb-usb/m920x.c
@@ -274,6 +274,13 @@ static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int nu
 			/* Should check for ack here, if we knew how. */
 		}
 		if (msg[i].flags & I2C_M_RD) {
+			char *read = kmalloc(1, GFP_KERNEL);
+			if (!read) {
+				ret = -ENOMEM;
+				kfree(read);
+				goto unlock;
+			}
+
 			for (j = 0; j < msg[i].len; j++) {
 				/* Last byte of transaction?
 				 * Send STOP, otherwise send ACK. */
@@ -281,9 +288,12 @@ static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int nu
 
 				if ((ret = m920x_read(d->udev, M9206_I2C, 0x0,
 						      0x20 | stop,
-						      &msg[i].buf[j], 1)) != 0)
+						      read, 1)) != 0)
 					goto unlock;
+				msg[i].buf[j] = read[0];
 			}
+
+			kfree(read);
 		} else {
 			for (j = 0; j < msg[i].len; j++) {
 				/* Last byte of transaction? Then send STOP. */
-- 
2.34.1

[PATCH AUTOSEL 5.10 049/116] thunderbolt: Runtime PM activate both ends of the device link

[Sasha Levin]

From: Mika Westerberg <mika.westerberg@linux.intel.com>

[ Upstream commit f3380cac0c0b3a6f49ab161e2a057c363962f48d ]

If protocol tunnels are already up when the driver is loaded, for
instance if the boot firmware implements connection manager of its own,
runtime PM reference count of the consumer devices behind the tunnel
might have been increased already before the device link is created but
the supplier device runtime PM reference count is not. This leads to a
situation where the supplier (the Thunderbolt driver) can runtime
suspend even if it should not because the corresponding protocol tunnel
needs to be up causing the devices to be removed from the corresponding
native bus.

Prevent this from happening by making both sides of the link runtime PM
active briefly. The pm_runtime_put() for the consumer (PCIe
root/downstream port, xHCI) then allows it to runtime suspend again but
keeps the supplier runtime resumed the whole time it is runtime active.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thunderbolt/acpi.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/thunderbolt/acpi.c b/drivers/thunderbolt/acpi.c
index b5442f979b4d0..6355fdf7d71a3 100644
--- a/drivers/thunderbolt/acpi.c
+++ b/drivers/thunderbolt/acpi.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/acpi.h>
+#include <linux/pm_runtime.h>
 
 #include "tb.h"
 
@@ -74,8 +75,18 @@ static acpi_status tb_acpi_add_link(acpi_handle handle, u32 level, void *data,
 		 pci_pcie_type(pdev) == PCI_EXP_TYPE_DOWNSTREAM))) {
 		const struct device_link *link;
 
+		/*
+		 * Make them both active first to make sure the NHI does
+		 * not runtime suspend before the consumer. The
+		 * pm_runtime_put() below then allows the consumer to
+		 * runtime suspend again (which then allows NHI runtime
+		 * suspend too now that the device link is established).
+		 */
+		pm_runtime_get_sync(&pdev->dev);
+
 		link = device_link_add(&pdev->dev, &nhi->pdev->dev,
 				       DL_FLAG_AUTOREMOVE_SUPPLIER |
+				       DL_FLAG_RPM_ACTIVE |
 				       DL_FLAG_PM_RUNTIME);
 		if (link) {
 			dev_dbg(&nhi->pdev->dev, "created link from %s\n",
@@ -84,6 +95,8 @@ static acpi_status tb_acpi_add_link(acpi_handle handle, u32 level, void *data,
 			dev_warn(&nhi->pdev->dev, "device link creation from %s failed\n",
 				 dev_name(&pdev->dev));
 		}
+
+		pm_runtime_put(&pdev->dev);
 	}
 
 out_put:
-- 
2.34.1

[PATCH AUTOSEL 5.10 050/116] iwlwifi: mvm: synchronize with FW after multicast commands

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit db66abeea3aefed481391ecc564fb7b7fb31d742 ]

If userspace installs a lot of multicast groups very quickly, then
we may run out of command queue space as we send the updates in an
asynchronous fashion (due to locking concerns), and the CPU can
create them faster than the firmware can process them. This is true
even when mac80211 has a work struct that gets scheduled.

Fix this by synchronizing with the firmware after sending all those
commands - outside of the iteration we can send a synchronous echo
command that just has the effect of the CPU waiting for the prior
asynchronous commands to finish. This also will cause fewer of the
commands to be sent to the firmware overall, because the work will
only run once when rescheduled multiple times while it's running.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=213649
Suggested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reported-by: Maximilian Ernestus <maximilian@ernestus.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204083238.51aea5b79ea4.I88a44798efda16e9fe480fb3e94224931d311b29@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/intel/iwlwifi/mvm/mac80211.c   | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index 81cc85a97eb20..922a7ea0cd24e 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -1739,6 +1739,7 @@ static void iwl_mvm_recalc_multicast(struct iwl_mvm *mvm)
 	struct iwl_mvm_mc_iter_data iter_data = {
 		.mvm = mvm,
 	};
+	int ret;
 
 	lockdep_assert_held(&mvm->mutex);
 
@@ -1748,6 +1749,22 @@ static void iwl_mvm_recalc_multicast(struct iwl_mvm *mvm)
 	ieee80211_iterate_active_interfaces_atomic(
 		mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
 		iwl_mvm_mc_iface_iterator, &iter_data);
+
+	/*
+	 * Send a (synchronous) ech command so that we wait for the
+	 * multiple asynchronous MCAST_FILTER_CMD commands sent by
+	 * the interface iterator. Otherwise, we might get here over
+	 * and over again (by userspace just sending a lot of these)
+	 * and the CPU can send them faster than the firmware can
+	 * process them.
+	 * Note that the CPU is still faster - but with this we'll
+	 * actually send fewer commands overall because the CPU will
+	 * not schedule the work in mac80211 as frequently if it's
+	 * still running when rescheduled (possibly multiple times).
+	 */
+	ret = iwl_mvm_send_cmd_pdu(mvm, ECHO_CMD, 0, 0, NULL);
+	if (ret)
+		IWL_ERR(mvm, "Failed to synchronize multicast groups update\n");
 }
 
 static u64 iwl_mvm_prepare_multicast(struct ieee80211_hw *hw,
-- 
2.34.1

[PATCH AUTOSEL 5.10 051/116] iwlwifi: mvm: avoid clearing a just saved session protection id

[Sasha Levin]

From: Shaul Triebitz <shaul.triebitz@intel.com>

[ Upstream commit 8e967c137df3b236d2075f9538cb888129425d1a ]

When scheduling a session protection the id is saved but
then it may be cleared when calling iwl_mvm_te_clear_data
(if a previous session protection is currently active).
Fix it by saving the id after calling iwl_mvm_te_clear_data.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204130722.b0743a588d14.I098fef6677d0dab3ef1b6183ed206a10bab01eb2@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/time-event.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
index 394598b14a173..6e6e5dd1b30d2 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
@@ -1157,15 +1157,10 @@ void iwl_mvm_schedule_session_protection(struct iwl_mvm *mvm,
 			cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id,
 							mvmvif->color)),
 		.action = cpu_to_le32(FW_CTXT_ACTION_ADD),
+		.conf_id = cpu_to_le32(SESSION_PROTECT_CONF_ASSOC),
 		.duration_tu = cpu_to_le32(MSEC_TO_TU(duration)),
 	};
 
-	/* The time_event_data.id field is reused to save session
-	 * protection's configuration.
-	 */
-	mvmvif->time_event_data.id = SESSION_PROTECT_CONF_ASSOC;
-	cmd.conf_id = cpu_to_le32(mvmvif->time_event_data.id);
-
 	lockdep_assert_held(&mvm->mutex);
 
 	spin_lock_bh(&mvm->time_event_lock);
@@ -1179,6 +1174,11 @@ void iwl_mvm_schedule_session_protection(struct iwl_mvm *mvm,
 	}
 
 	iwl_mvm_te_clear_data(mvm, te_data);
+	/*
+	 * The time_event_data.id field is reused to save session
+	 * protection's configuration.
+	 */
+	te_data->id = le32_to_cpu(cmd.conf_id);
 	te_data->duration = le32_to_cpu(cmd.duration_tu);
 	spin_unlock_bh(&mvm->time_event_lock);
 
-- 
2.34.1

[PATCH AUTOSEL 5.10 052/116] net: dsa: ocelot: felix: Remove requirement for PCS in felix devices

[Sasha Levin]

From: Colin Foster <colin.foster@in-advantage.com>

[ Upstream commit 49af6a7620c53b779572abfbfd7778e113154330 ]

Existing felix devices all have an initialized pcs array. Future devices
might not, so running a NULL check on the array before dereferencing it
will allow those future drivers to not crash at this point

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/ocelot/felix.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index 4e53464411edf..c1105bd7cf67b 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -204,7 +204,7 @@ static void felix_phylink_mac_config(struct dsa_switch *ds, int port,
 	struct felix *felix = ocelot_to_felix(ocelot);
 	struct dsa_port *dp = dsa_to_port(ds, port);
 
-	if (felix->pcs[port])
+	if (felix->pcs && felix->pcs[port])
 		phylink_set_pcs(dp->pl, &felix->pcs[port]->pcs);
 }
 
-- 
2.34.1

[PATCH AUTOSEL 5.10 053/116] ath11k: avoid deadlock by change ieee80211_queue_work for regd_update_work

[Sasha Levin]

From: Wen Gong <quic_wgong@quicinc.com>

[ Upstream commit ed05c7cf1286d7e31e7623bce55ff135723591bf ]

When enable debug config, it print below warning while shut down wlan
interface shuh as run "ifconfig wlan0 down".

The reason is because ar->regd_update_work is ran once, and it is will
call wiphy_lock(ar->hw->wiphy) in function ath11k_regd_update() which
is running in workqueue of ieee80211_local queued by ieee80211_queue_work().
Another thread from "ifconfig wlan0 down" will also accuqire the lock
by wiphy_lock(sdata->local->hw.wiphy) in function ieee80211_stop(), and
then it call ieee80211_stop_device() to flush_workqueue(local->workqueue),
this will wait the workqueue of ieee80211_local finished. Then deadlock
will happen easily if the two thread run meanwhile.

Below warning disappeared after this change.

[  914.088798] ath11k_pci 0000:05:00.0: mac remove interface (vdev 0)
[  914.088806] ath11k_pci 0000:05:00.0: mac stop 11d scan
[  914.088810] ath11k_pci 0000:05:00.0: mac stop 11d vdev id 0
[  914.088827] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0)
[  914.088841] ath11k_pci 0000:05:00.0: send 11d scan stop vdev id 0
[  914.088849] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0
[  914.088856] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0
[  914.096434] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16
[  914.096442] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1)
[  914.096481] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0)
[  914.096491] ath11k_pci 0000:05:00.0: WMI vdev delete id 0
[  914.111598] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16
[  914.111628] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1)
[  914.114659] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 20
[  914.114742] ath11k_pci 0000:05:00.0: htc rx completion ep 2 skb         pK-error
[  914.115977] ath11k_pci 0000:05:00.0: vdev delete resp for vdev id 0
[  914.116685] ath11k_pci 0000:05:00.0: vdev 00:03:7f:29:61:11 deleted, vdev_id 0

[  914.117583] ======================================================
[  914.117592] WARNING: possible circular locking dependency detected
[  914.117600] 5.16.0-rc1-wt-ath+ #1 Tainted: G           OE
[  914.117611] ------------------------------------------------------
[  914.117618] ifconfig/2805 is trying to acquire lock:
[  914.117628] ffff9c00a62bb548 ((wq_completion)phy0){+.+.}-{0:0}, at: flush_workqueue+0x87/0x470
[  914.117674]
               but task is already holding lock:
[  914.117682] ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211]
[  914.117872]
               which lock already depends on the new lock.

[  914.117880]
               the existing dependency chain (in reverse order) is:
[  914.117888]
               -> #3 (&rdev->wiphy.mtx){+.+.}-{4:4}:
[  914.117910]        __mutex_lock+0xa0/0x9c0
[  914.117930]        mutex_lock_nested+0x1b/0x20
[  914.117944]        reg_process_self_managed_hints+0x3a/0xb0 [cfg80211]
[  914.118093]        wiphy_regulatory_register+0x47/0x80 [cfg80211]
[  914.118229]        wiphy_register+0x84f/0x9c0 [cfg80211]
[  914.118353]        ieee80211_register_hw+0x6b1/0xd90 [mac80211]
[  914.118486]        ath11k_mac_register+0x6af/0xb60 [ath11k]
[  914.118550]        ath11k_core_qmi_firmware_ready+0x383/0x4a0 [ath11k]
[  914.118598]        ath11k_qmi_driver_event_work+0x347/0x4a0 [ath11k]
[  914.118656]        process_one_work+0x228/0x670
[  914.118669]        worker_thread+0x4d/0x440
[  914.118680]        kthread+0x16d/0x1b0
[  914.118697]        ret_from_fork+0x22/0x30
[  914.118714]
               -> #2 (rtnl_mutex){+.+.}-{4:4}:
[  914.118736]        __mutex_lock+0xa0/0x9c0
[  914.118751]        mutex_lock_nested+0x1b/0x20
[  914.118767]        rtnl_lock+0x17/0x20
[  914.118783]        ath11k_regd_update+0x15a/0x260 [ath11k]
[  914.118841]        ath11k_regd_update_work+0x15/0x20 [ath11k]
[  914.118897]        process_one_work+0x228/0x670
[  914.118909]        worker_thread+0x4d/0x440
[  914.118920]        kthread+0x16d/0x1b0
[  914.118934]        ret_from_fork+0x22/0x30
[  914.118948]
               -> #1 ((work_completion)(&ar->regd_update_work)){+.+.}-{0:0}:
[  914.118972]        process_one_work+0x1fa/0x670
[  914.118984]        worker_thread+0x4d/0x440
[  914.118996]        kthread+0x16d/0x1b0
[  914.119010]        ret_from_fork+0x22/0x30
[  914.119023]
               -> #0 ((wq_completion)phy0){+.+.}-{0:0}:
[  914.119045]        __lock_acquire+0x146d/0x1cf0
[  914.119057]        lock_acquire+0x19b/0x360
[  914.119067]        flush_workqueue+0xae/0x470
[  914.119084]        ieee80211_stop_device+0x3b/0x50 [mac80211]
[  914.119260]        ieee80211_do_stop+0x5d7/0x830 [mac80211]
[  914.119409]        ieee80211_stop+0x45/0x180 [mac80211]
[  914.119557]        __dev_close_many+0xb3/0x120
[  914.119573]        __dev_change_flags+0xc3/0x1d0
[  914.119590]        dev_change_flags+0x29/0x70
[  914.119605]        devinet_ioctl+0x653/0x810
[  914.119620]        inet_ioctl+0x193/0x1e0
[  914.119631]        sock_do_ioctl+0x4d/0xf0
[  914.119649]        sock_ioctl+0x262/0x340
[  914.119665]        __x64_sys_ioctl+0x96/0xd0
[  914.119678]        do_syscall_64+0x3d/0xd0
[  914.119694]        entry_SYSCALL_64_after_hwframe+0x44/0xae
[  914.119709]
               other info that might help us debug this:

[  914.119717] Chain exists of:
                 (wq_completion)phy0 --> rtnl_mutex --> &rdev->wiphy.mtx

[  914.119745]  Possible unsafe locking scenario:

[  914.119752]        CPU0                    CPU1
[  914.119758]        ----                    ----
[  914.119765]   lock(&rdev->wiphy.mtx);
[  914.119778]                                lock(rtnl_mutex);
[  914.119792]                                lock(&rdev->wiphy.mtx);
[  914.119807]   lock((wq_completion)phy0);
[  914.119819]
                *** DEADLOCK ***

[  914.119827] 2 locks held by ifconfig/2805:
[  914.119837]  #0: ffffffffba3dc010 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x17/0x20
[  914.119872]  #1: ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211]
[  914.120039]
               stack backtrace:
[  914.120048] CPU: 0 PID: 2805 Comm: ifconfig Tainted: G           OE     5.16.0-rc1-wt-ath+ #1
[  914.120064] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011
[  914.120074] Call Trace:
[  914.120084]  <TASK>
[  914.120094]  dump_stack_lvl+0x73/0xa4
[  914.120119]  dump_stack+0x10/0x12
[  914.120135]  print_circular_bug.isra.44+0x221/0x2e0
[  914.120165]  check_noncircular+0x106/0x150
[  914.120203]  __lock_acquire+0x146d/0x1cf0
[  914.120215]  ? __lock_acquire+0x146d/0x1cf0
[  914.120245]  lock_acquire+0x19b/0x360
[  914.120259]  ? flush_workqueue+0x87/0x470
[  914.120286]  ? lockdep_init_map_type+0x6b/0x250
[  914.120310]  flush_workqueue+0xae/0x470
[  914.120327]  ? flush_workqueue+0x87/0x470
[  914.120344]  ? lockdep_hardirqs_on+0xd7/0x150
[  914.120391]  ieee80211_stop_device+0x3b/0x50 [mac80211]
[  914.120565]  ? ieee80211_stop_device+0x3b/0x50 [mac80211]
[  914.120736]  ieee80211_do_stop+0x5d7/0x830 [mac80211]
[  914.120906]  ieee80211_stop+0x45/0x180 [mac80211]
[  914.121060]  __dev_close_many+0xb3/0x120
[  914.121081]  __dev_change_flags+0xc3/0x1d0
[  914.121109]  dev_change_flags+0x29/0x70
[  914.121131]  devinet_ioctl+0x653/0x810
[  914.121149]  ? __might_fault+0x77/0x80
[  914.121179]  inet_ioctl+0x193/0x1e0
[  914.121194]  ? inet_ioctl+0x193/0x1e0
[  914.121218]  ? __might_fault+0x77/0x80
[  914.121238]  ? _copy_to_user+0x68/0x80
[  914.121266]  sock_do_ioctl+0x4d/0xf0
[  914.121283]  ? inet_stream_connect+0x60/0x60
[  914.121297]  ? sock_do_ioctl+0x4d/0xf0
[  914.121329]  sock_ioctl+0x262/0x340
[  914.121347]  ? sock_ioctl+0x262/0x340
[  914.121362]  ? exit_to_user_mode_prepare+0x13b/0x280
[  914.121388]  ? syscall_enter_from_user_mode+0x20/0x50
[  914.121416]  __x64_sys_ioctl+0x96/0xd0
[  914.121430]  ? br_ioctl_call+0x90/0x90
[  914.121445]  ? __x64_sys_ioctl+0x96/0xd0
[  914.121465]  do_syscall_64+0x3d/0xd0
[  914.121482]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  914.121497] RIP: 0033:0x7f0ed051737b
[  914.121513] Code: 0f 1e fa 48 8b 05 15 3b 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e5 3a 0d 00 f7 d8 64 89 01 48
[  914.121527] RSP: 002b:00007fff7be38b98 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[  914.121544] RAX: ffffffffffffffda RBX: 00007fff7be38ba0 RCX: 00007f0ed051737b
[  914.121555] RDX: 00007fff7be38ba0 RSI: 0000000000008914 RDI: 0000000000000004
[  914.121566] RBP: 00007fff7be38c60 R08: 000000000000000a R09: 0000000000000001
[  914.121576] R10: 0000000000000000 R11: 0000000000000202 R12: 00000000fffffffe
[  914.121586] R13: 0000000000000004 R14: 0000000000000000 R15: 0000000000000000
[  914.121620]  </TASK>

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211201071745.17746-2-quic_wgong@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/wmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 74ebe8e7d1d81..c6f91e0367a90 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -5421,7 +5421,7 @@ static int ath11k_reg_chan_list_event(struct ath11k_base *ab, struct sk_buff *sk
 		ar = ab->pdevs[pdev_idx].ar;
 		kfree(ab->new_regd[pdev_idx]);
 		ab->new_regd[pdev_idx] = regd;
-		ieee80211_queue_work(ar->hw, &ar->regd_update_work);
+		queue_work(ab->workqueue, &ar->regd_update_work);
 	} else {
 		/* This regd would be applied during mac registration and is
 		 * held constant throughout for regd intersection purpose
-- 
2.34.1

[PATCH AUTOSEL 5.10 054/116] ath10k: Fix tx hanging

[Sasha Levin]

From: Sebastian Gottschall <s.gottschall@dd-wrt.com>

[ Upstream commit e8a91863eba3966a447d2daa1526082d52b5db2a ]

While running stress tests in roaming scenarios (switching ap's every 5
seconds, we discovered a issue which leads to tx hangings of exactly 5
seconds while or after scanning for new accesspoints. We found out that
this hanging is triggered by ath10k_mac_wait_tx_complete since the
empty_tx_wq was not wake when the num_tx_pending counter reaches zero.
To fix this, we simply move the wake_up call to htt_tx_dec_pending,
since this call was missed on several locations within the ath10k code.

Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20210505085806.11474-1-s.gottschall@dd-wrt.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/htt_tx.c | 3 +++
 drivers/net/wireless/ath/ath10k/txrx.c   | 2 --
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index 1fc0a312ab587..5f67da47036cf 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -147,6 +147,9 @@ void ath10k_htt_tx_dec_pending(struct ath10k_htt *htt)
 	htt->num_pending_tx--;
 	if (htt->num_pending_tx == htt->max_num_pending_tx - 1)
 		ath10k_mac_tx_unlock(htt->ar, ATH10K_TX_PAUSE_Q_FULL);
+
+	if (htt->num_pending_tx == 0)
+		wake_up(&htt->empty_tx_wq);
 }
 
 int ath10k_htt_tx_inc_pending(struct ath10k_htt *htt)
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index aefe1f7f906c0..f51f1cf2c6a40 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -82,8 +82,6 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 	flags = skb_cb->flags;
 	ath10k_htt_tx_free_msdu_id(htt, tx_done->msdu_id);
 	ath10k_htt_tx_dec_pending(htt);
-	if (htt->num_pending_tx == 0)
-		wake_up(&htt->empty_tx_wq);
 	spin_unlock_bh(&htt->tx_lock);
 
 	rcu_read_lock();
-- 
2.34.1

[PATCH AUTOSEL 5.10 055/116] net-sysfs: update the queue counts in the unregistration path

[Sasha Levin]

From: Antoine Tenart <atenart@kernel.org>

[ Upstream commit d7dac083414eb5bb99a6d2ed53dc2c1b405224e5 ]

When updating Rx and Tx queue kobjects, the queue count should always be
updated to match the queue kobjects count. This was not done in the net
device unregistration path, fix it. Tracking all queue count updates
will allow in a following up patch to detect illegal updates.

Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/net-sysfs.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index af59123601055..99303897b7bb7 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -1804,6 +1804,9 @@ static void remove_queue_kobjects(struct net_device *dev)
 
 	net_rx_queue_update_kobjects(dev, real_rx, 0);
 	netdev_queue_update_kobjects(dev, real_tx, 0);
+
+	dev->real_num_rx_queues = 0;
+	dev->real_num_tx_queues = 0;
 #ifdef CONFIG_SYSFS
 	kset_unregister(dev->queues_kset);
 #endif
-- 
2.34.1

[PATCH AUTOSEL 5.10 056/116] net: phy: prefer 1000baseT over 1000baseKX

[Sasha Levin]

From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>

[ Upstream commit f20f94f7f52c4685c81754f489ffcc72186e8bdb ]

The PHY settings table is supposed to be sorted by descending match
priority - in other words, earlier entries are preferred over later
entries.

The order of 1000baseKX/Full and 1000baseT/Full is such that we
prefer 1000baseKX/Full over 1000baseT/Full, but 1000baseKX/Full is
a lot rarer than 1000baseT/Full, and thus is much less likely to
be preferred.

This causes phylink problems - it means a fixed link specifying a
speed of 1G and full duplex gets an ethtool linkmode of 1000baseKX/Full
rather than 1000baseT/Full as would be expected - and since we offer
userspace a software emulation of a conventional copper PHY, we want
to offer copper modes in preference to anything else. However, we do
still want to allow the rarer modes as well.

Hence, let's reorder these two modes to prefer copper.

Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/E1muvFO-00F6jY-1K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index 8d333d3084ed3..cccb83dae673b 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -161,11 +161,11 @@ static const struct phy_setting settings[] = {
 	PHY_SETTING(   2500, FULL,   2500baseT_Full		),
 	PHY_SETTING(   2500, FULL,   2500baseX_Full		),
 	/* 1G */
-	PHY_SETTING(   1000, FULL,   1000baseKX_Full		),
 	PHY_SETTING(   1000, FULL,   1000baseT_Full		),
 	PHY_SETTING(   1000, HALF,   1000baseT_Half		),
 	PHY_SETTING(   1000, FULL,   1000baseT1_Full		),
 	PHY_SETTING(   1000, FULL,   1000baseX_Full		),
+	PHY_SETTING(   1000, FULL,   1000baseKX_Full		),
 	/* 100M */
 	PHY_SETTING(    100, FULL,    100baseT_Full		),
 	PHY_SETTING(    100, FULL,    100baseT1_Full		),
-- 
2.34.1

[PATCH AUTOSEL 5.10 057/116] gpio: aspeed: Convert aspeed_gpio.lock to raw_spinlock

[Sasha Levin]

From: Iwona Winiarska <iwona.winiarska@intel.com>

[ Upstream commit 61a7904b6ace99b1bde0d0e867fa3097f5c8cee2 ]

The gpio-aspeed driver implements an irq_chip which need to be invoked
from hardirq context. Since spin_lock() can sleep with PREEMPT_RT, it is
no longer legal to invoke it while interrupts are disabled.
This also causes lockdep to complain about:
[    0.649797] [ BUG: Invalid wait context ]
because aspeed_gpio.lock (spin_lock_t) is taken under irq_desc.lock
(raw_spinlock_t).
Let's use of raw_spinlock_t instead of spinlock_t.

Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-aspeed.c | 52 +++++++++++++++++++-------------------
 1 file changed, 26 insertions(+), 26 deletions(-)

diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index b966f5e28ebff..e0d5d80ec8e0f 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -53,7 +53,7 @@ struct aspeed_gpio_config {
 struct aspeed_gpio {
 	struct gpio_chip chip;
 	struct irq_chip irqc;
-	spinlock_t lock;
+	raw_spinlock_t lock;
 	void __iomem *base;
 	int irq;
 	const struct aspeed_gpio_config *config;
@@ -413,14 +413,14 @@ static void aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset,
 	unsigned long flags;
 	bool copro;
 
-	spin_lock_irqsave(&gpio->lock, flags);
+	raw_spin_lock_irqsave(&gpio->lock, flags);
 	copro = aspeed_gpio_copro_request(gpio, offset);
 
 	__aspeed_gpio_set(gc, offset, val);
 
 	if (copro)
 		aspeed_gpio_copro_release(gpio, offset);
-	spin_unlock_irqrestore(&gpio->lock, flags);
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
 }
 
 static int aspeed_gpio_dir_in(struct gpio_chip *gc, unsigned int offset)
@@ -435,7 +435,7 @@ static int aspeed_gpio_dir_in(struct gpio_chip *gc, unsigned int offset)
 	if (!have_input(gpio, offset))
 		return -ENOTSUPP;
 
-	spin_lock_irqsave(&gpio->lock, flags);
+	raw_spin_lock_irqsave(&gpio->lock, flags);
 
 	reg = ioread32(addr);
 	reg &= ~GPIO_BIT(offset);
@@ -445,7 +445,7 @@ static int aspeed_gpio_dir_in(struct gpio_chip *gc, unsigned int offset)
 	if (copro)
 		aspeed_gpio_copro_release(gpio, offset);
 
-	spin_unlock_irqrestore(&gpio->lock, flags);
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
 
 	return 0;
 }
@@ -463,7 +463,7 @@ static int aspeed_gpio_dir_out(struct gpio_chip *gc,
 	if (!have_output(gpio, offset))
 		return -ENOTSUPP;
 
-	spin_lock_irqsave(&gpio->lock, flags);
+	raw_spin_lock_irqsave(&gpio->lock, flags);
 
 	reg = ioread32(addr);
 	reg |= GPIO_BIT(offset);
@@ -474,7 +474,7 @@ static int aspeed_gpio_dir_out(struct gpio_chip *gc,
 
 	if (copro)
 		aspeed_gpio_copro_release(gpio, offset);
-	spin_unlock_irqrestore(&gpio->lock, flags);
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
 
 	return 0;
 }
@@ -492,11 +492,11 @@ static int aspeed_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
 	if (!have_output(gpio, offset))
 		return GPIO_LINE_DIRECTION_IN;
 
-	spin_lock_irqsave(&gpio->lock, flags);
+	raw_spin_lock_irqsave(&gpio->lock, flags);
 
 	val = ioread32(bank_reg(gpio, bank, reg_dir)) & GPIO_BIT(offset);
 
-	spin_unlock_irqrestore(&gpio->lock, flags);
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
 
 	return val ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
 }
@@ -539,14 +539,14 @@ static void aspeed_gpio_irq_ack(struct irq_data *d)
 
 	status_addr = bank_reg(gpio, bank, reg_irq_status);
 
-	spin_lock_irqsave(&gpio->lock, flags);
+	raw_spin_lock_irqsave(&gpio->lock, flags);
 	copro = aspeed_gpio_copro_request(gpio, offset);
 
 	iowrite32(bit, status_addr);
 
 	if (copro)
 		aspeed_gpio_copro_release(gpio, offset);
-	spin_unlock_irqrestore(&gpio->lock, flags);
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
 }
 
 static void aspeed_gpio_irq_set_mask(struct irq_data *d, bool set)
@@ -565,7 +565,7 @@ static void aspeed_gpio_irq_set_mask(struct irq_data *d, bool set)
 
 	addr = bank_reg(gpio, bank, reg_irq_enable);
 
-	spin_lock_irqsave(&gpio->lock, flags);
+	raw_spin_lock_irqsave(&gpio->lock, flags);
 	copro = aspeed_gpio_copro_request(gpio, offset);
 
 	reg = ioread32(addr);
@@ -577,7 +577,7 @@ static void aspeed_gpio_irq_set_mask(struct irq_data *d, bool set)
 
 	if (copro)
 		aspeed_gpio_copro_release(gpio, offset);
-	spin_unlock_irqrestore(&gpio->lock, flags);
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
 }
 
 static void aspeed_gpio_irq_mask(struct irq_data *d)
@@ -629,7 +629,7 @@ static int aspeed_gpio_set_type(struct irq_data *d, unsigned int type)
 		return -EINVAL;
 	}
 
-	spin_lock_irqsave(&gpio->lock, flags);
+	raw_spin_lock_irqsave(&gpio->lock, flags);
 	copro = aspeed_gpio_copro_request(gpio, offset);
 
 	addr = bank_reg(gpio, bank, reg_irq_type0);
@@ -649,7 +649,7 @@ static int aspeed_gpio_set_type(struct irq_data *d, unsigned int type)
 
 	if (copro)
 		aspeed_gpio_copro_release(gpio, offset);
-	spin_unlock_irqrestore(&gpio->lock, flags);
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
 
 	irq_set_handler_locked(d, handler);
 
@@ -719,7 +719,7 @@ static int aspeed_gpio_reset_tolerance(struct gpio_chip *chip,
 
 	treg = bank_reg(gpio, to_bank(offset), reg_tolerance);
 
-	spin_lock_irqsave(&gpio->lock, flags);
+	raw_spin_lock_irqsave(&gpio->lock, flags);
 	copro = aspeed_gpio_copro_request(gpio, offset);
 
 	val = readl(treg);
@@ -733,7 +733,7 @@ static int aspeed_gpio_reset_tolerance(struct gpio_chip *chip,
 
 	if (copro)
 		aspeed_gpio_copro_release(gpio, offset);
-	spin_unlock_irqrestore(&gpio->lock, flags);
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
 
 	return 0;
 }
@@ -859,7 +859,7 @@ static int enable_debounce(struct gpio_chip *chip, unsigned int offset,
 		return rc;
 	}
 
-	spin_lock_irqsave(&gpio->lock, flags);
+	raw_spin_lock_irqsave(&gpio->lock, flags);
 
 	if (timer_allocation_registered(gpio, offset)) {
 		rc = unregister_allocated_timer(gpio, offset);
@@ -919,7 +919,7 @@ static int enable_debounce(struct gpio_chip *chip, unsigned int offset,
 	configure_timer(gpio, offset, i);
 
 out:
-	spin_unlock_irqrestore(&gpio->lock, flags);
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
 
 	return rc;
 }
@@ -930,13 +930,13 @@ static int disable_debounce(struct gpio_chip *chip, unsigned int offset)
 	unsigned long flags;
 	int rc;
 
-	spin_lock_irqsave(&gpio->lock, flags);
+	raw_spin_lock_irqsave(&gpio->lock, flags);
 
 	rc = unregister_allocated_timer(gpio, offset);
 	if (!rc)
 		configure_timer(gpio, offset, 0);
 
-	spin_unlock_irqrestore(&gpio->lock, flags);
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
 
 	return rc;
 }
@@ -1018,7 +1018,7 @@ int aspeed_gpio_copro_grab_gpio(struct gpio_desc *desc,
 		return -EINVAL;
 	bindex = offset >> 3;
 
-	spin_lock_irqsave(&gpio->lock, flags);
+	raw_spin_lock_irqsave(&gpio->lock, flags);
 
 	/* Sanity check, this shouldn't happen */
 	if (gpio->cf_copro_bankmap[bindex] == 0xff) {
@@ -1039,7 +1039,7 @@ int aspeed_gpio_copro_grab_gpio(struct gpio_desc *desc,
 	if (bit)
 		*bit = GPIO_OFFSET(offset);
  bail:
-	spin_unlock_irqrestore(&gpio->lock, flags);
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
 	return rc;
 }
 EXPORT_SYMBOL_GPL(aspeed_gpio_copro_grab_gpio);
@@ -1063,7 +1063,7 @@ int aspeed_gpio_copro_release_gpio(struct gpio_desc *desc)
 		return -EINVAL;
 	bindex = offset >> 3;
 
-	spin_lock_irqsave(&gpio->lock, flags);
+	raw_spin_lock_irqsave(&gpio->lock, flags);
 
 	/* Sanity check, this shouldn't happen */
 	if (gpio->cf_copro_bankmap[bindex] == 0) {
@@ -1077,7 +1077,7 @@ int aspeed_gpio_copro_release_gpio(struct gpio_desc *desc)
 		aspeed_gpio_change_cmd_source(gpio, bank, bindex,
 					      GPIO_CMDSRC_ARM);
  bail:
-	spin_unlock_irqrestore(&gpio->lock, flags);
+	raw_spin_unlock_irqrestore(&gpio->lock, flags);
 	return rc;
 }
 EXPORT_SYMBOL_GPL(aspeed_gpio_copro_release_gpio);
@@ -1151,7 +1151,7 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
 	if (IS_ERR(gpio->base))
 		return PTR_ERR(gpio->base);
 
-	spin_lock_init(&gpio->lock);
+	raw_spin_lock_init(&gpio->lock);
 
 	gpio_id = of_match_node(aspeed_gpio_of_table, pdev->dev.of_node);
 	if (!gpio_id)
-- 
2.34.1

[PATCH AUTOSEL 5.10 058/116] selftests/ftrace: make kprobe profile testcase description unique

[Sasha Levin]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit e5992f373c6eed6d09e5858e9623df1259b3ce30 ]

Commit 32f6e5da83c7 ("selftests/ftrace: Add kprobe profile testcase")
added a new kprobes testcase, but has a description which does not
describe what the test case is doing and is duplicating the description
of another test case.

Therefore change the test case description, so it is unique and then
allows easily to tell which test case actually passed or failed.

Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/ftrace/test.d/kprobe/profile.tc | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/profile.tc b/tools/testing/selftests/ftrace/test.d/kprobe/profile.tc
index 98166fa3eb91c..34fb89b0c61fa 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/profile.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/profile.tc
@@ -1,6 +1,6 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
-# description: Kprobe dynamic event - adding and removing
+# description: Kprobe profile
 # requires: kprobe_events
 
 ! grep -q 'myevent' kprobe_profile
-- 
2.34.1

[PATCH AUTOSEL 5.10 059/116] net: Enable neighbor sysctls that is save for userns root

[Sasha Levin]

From: xu xin <xu.xin16@zte.com.cn>

[ Upstream commit 8c8b7aa7fb0cf9e1cc9204e6bc6e1353b8393502 ]

Inside netns owned by non-init userns, sysctls about ARP/neighbor is
currently not visible and configurable.

For the attributes these sysctls correspond to, any modifications make
effects on the performance of networking(ARP, especilly) only in the
scope of netns, which does not affect other netns.

Actually, some tools via netlink can modify these attribute. iproute2 is
an example. see as follows:

$ unshare -ur -n
$ cat /proc/sys/net/ipv4/neigh/lo/retrans_time
cat: can't open '/proc/sys/net/ipv4/neigh/lo/retrans_time': No such file
or directory
$ ip ntable show dev lo
inet arp_cache
    dev lo
    refcnt 1 reachable 19494 base_reachable 30000 retrans 1000
    gc_stale 60000 delay_probe 5000 queue 101
    app_probes 0 ucast_probes 3 mcast_probes 3
    anycast_delay 1000 proxy_delay 800 proxy_queue 64 locktime 1000

inet6 ndisc_cache
    dev lo
    refcnt 1 reachable 42394 base_reachable 30000 retrans 1000
    gc_stale 60000 delay_probe 5000 queue 101
    app_probes 0 ucast_probes 3 mcast_probes 3
    anycast_delay 1000 proxy_delay 800 proxy_queue 64 locktime 0
$ ip ntable change name arp_cache dev <if> retrans 2000
inet arp_cache
    dev lo
    refcnt 1 reachable 22917 base_reachable 30000 retrans 2000
    gc_stale 60000 delay_probe 5000 queue 101
    app_probes 0 ucast_probes 3 mcast_probes 3
    anycast_delay 1000 proxy_delay 800 proxy_queue 64 locktime 1000

inet6 ndisc_cache
    dev lo
    refcnt 1 reachable 35524 base_reachable 30000 retrans 1000
    gc_stale 60000 delay_probe 5000 queue 101
    app_probes 0 ucast_probes 3 mcast_probes 3
    anycast_delay 1000 proxy_delay 800 proxy_queue 64 locktime 0

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Acked-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/neighbour.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 52a1c8725337b..d3efa13c903d4 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -3687,10 +3687,6 @@ int neigh_sysctl_register(struct net_device *dev, struct neigh_parms *p,
 			neigh_proc_base_reachable_time;
 	}
 
-	/* Don't export sysctls to unprivileged users */
-	if (neigh_parms_net(p)->user_ns != &init_user_ns)
-		t->neigh_vars[0].procname = NULL;
-
 	switch (neigh_parms_family(p)) {
 	case AF_INET:
 	      p_name = "ipv4";
-- 
2.34.1

[PATCH AUTOSEL 5.10 060/116] ath11k: Avoid false DEADLOCK warning reported by lockdep

[Sasha Levin]

From: Baochen Qiang <quic_bqiang@quicinc.com>

[ Upstream commit 767c94caf0efad136157110787fe221b74cb5c8a ]

With CONFIG_LOCKDEP=y and CONFIG_DEBUG_SPINLOCK=y, lockdep reports
below warning:

[  166.059415] ============================================
[  166.059416] WARNING: possible recursive locking detected
[  166.059418] 5.15.0-wt-ath+ #10 Tainted: G        W  O
[  166.059420] --------------------------------------------
[  166.059421] kworker/0:2/116 is trying to acquire lock:
[  166.059423] ffff9905f2083160 (&srng->lock){+.-.}-{2:2}, at: ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[  166.059440]
               but task is already holding lock:
[  166.059442] ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k]
[  166.059491]
               other info that might help us debug this:
[  166.059492]  Possible unsafe locking scenario:

[  166.059493]        CPU0
[  166.059494]        ----
[  166.059495]   lock(&srng->lock);
[  166.059498]   lock(&srng->lock);
[  166.059500]
                *** DEADLOCK ***

[  166.059501]  May be due to missing lock nesting notation

[  166.059502] 3 locks held by kworker/0:2/116:
[  166.059504]  #0: ffff9905c0081548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660
[  166.059511]  #1: ffff9d2400a5fe68 ((debug_obj_work).work){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660
[  166.059517]  #2: ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k]
[  166.059532]
               stack backtrace:
[  166.059534] CPU: 0 PID: 116 Comm: kworker/0:2 Kdump: loaded Tainted: G        W  O      5.15.0-wt-ath+ #10
[  166.059537] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0059.2019.1112.1124 11/12/2019
[  166.059539] Workqueue: events free_obj_work
[  166.059543] Call Trace:
[  166.059545]  <IRQ>
[  166.059547]  dump_stack_lvl+0x56/0x7b
[  166.059552]  __lock_acquire+0xb9a/0x1a50
[  166.059556]  lock_acquire+0x1e2/0x330
[  166.059560]  ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[  166.059571]  _raw_spin_lock_bh+0x33/0x70
[  166.059574]  ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[  166.059584]  ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[  166.059594]  ath11k_dp_tx_send_reo_cmd+0x3f/0x130 [ath11k]
[  166.059605]  ath11k_dp_rx_tid_del_func+0x221/0x370 [ath11k]
[  166.059618]  ath11k_dp_process_reo_status+0x22f/0x2d0 [ath11k]
[  166.059632]  ? ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k]
[  166.059643]  ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k]
[  166.059655]  ath11k_pci_ext_grp_napi_poll+0x1c/0x70 [ath11k_pci]
[  166.059659]  __napi_poll+0x28/0x230
[  166.059664]  net_rx_action+0x285/0x310
[  166.059668]  __do_softirq+0xe6/0x4d2
[  166.059672]  irq_exit_rcu+0xd2/0xf0
[  166.059675]  common_interrupt+0xa5/0xc0
[  166.059678]  </IRQ>
[  166.059679]  <TASK>
[  166.059680]  asm_common_interrupt+0x1e/0x40
[  166.059683] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70
[  166.059686] Code: 83 c7 18 e8 2a 95 43 ff 48 89 ef e8 22 d2 43 ff 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 63 2e 40 ff 65 8b 05 8c 59 97 5c 85 c0 74 0a 5b 5d c3 e8 00 6a
[  166.059689] RSP: 0018:ffff9d2400a5fca0 EFLAGS: 00000206
[  166.059692] RAX: 0000000000000002 RBX: 0000000000000200 RCX: 0000000000000006
[  166.059694] RDX: 0000000000000000 RSI: ffffffffa404879b RDI: 0000000000000001
[  166.059696] RBP: ffff9905c0053000 R08: 0000000000000001 R09: 0000000000000001
[  166.059698] R10: ffff9d2400a5fc50 R11: 0000000000000001 R12: ffffe186c41e2840
[  166.059700] R13: 0000000000000001 R14: ffff9905c78a1c68 R15: 0000000000000001
[  166.059704]  free_debug_processing+0x257/0x3d0
[  166.059708]  ? free_obj_work+0x1f5/0x250
[  166.059712]  __slab_free+0x374/0x5a0
[  166.059718]  ? kmem_cache_free+0x2e1/0x370
[  166.059721]  ? free_obj_work+0x1f5/0x250
[  166.059724]  kmem_cache_free+0x2e1/0x370
[  166.059727]  free_obj_work+0x1f5/0x250
[  166.059731]  process_one_work+0x28b/0x660
[  166.059735]  ? process_one_work+0x660/0x660
[  166.059738]  worker_thread+0x37/0x390
[  166.059741]  ? process_one_work+0x660/0x660
[  166.059743]  kthread+0x176/0x1a0
[  166.059746]  ? set_kthread_struct+0x40/0x40
[  166.059749]  ret_from_fork+0x22/0x30
[  166.059754]  </TASK>

Since these two lockes are both initialized in ath11k_hal_srng_setup,
they are assigned with the same key. As a result lockdep suspects that
the task is trying to acquire the same lock (due to same key) while
already holding it, and thus reports the DEADLOCK warning. However as
they are different spinlock instances, the warning is false positive.

On the other hand, even no dead lock indeed, this is a major issue for
upstream regression testing as it disables lockdep functionality.

Fix it by assigning separate lock class key for each srng->lock.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211209011949.151472-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/hal.c | 22 ++++++++++++++++++++++
 drivers/net/wireless/ath/ath11k/hal.h |  2 ++
 2 files changed, 24 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/hal.c b/drivers/net/wireless/ath/ath11k/hal.c
index 9904c0eb75875..f3b9108ab6bd0 100644
--- a/drivers/net/wireless/ath/ath11k/hal.c
+++ b/drivers/net/wireless/ath/ath11k/hal.c
@@ -991,6 +991,7 @@ int ath11k_hal_srng_setup(struct ath11k_base *ab, enum hal_ring_type type,
 	srng->msi_data = params->msi_data;
 	srng->initialized = 1;
 	spin_lock_init(&srng->lock);
+	lockdep_set_class(&srng->lock, hal->srng_key + ring_id);
 
 	for (i = 0; i < HAL_SRNG_NUM_REG_GRP; i++) {
 		srng->hwreg_base[i] = srng_config->reg_start[i] +
@@ -1237,6 +1238,24 @@ static int ath11k_hal_srng_create_config(struct ath11k_base *ab)
 	return 0;
 }
 
+static void ath11k_hal_register_srng_key(struct ath11k_base *ab)
+{
+	struct ath11k_hal *hal = &ab->hal;
+	u32 ring_id;
+
+	for (ring_id = 0; ring_id < HAL_SRNG_RING_ID_MAX; ring_id++)
+		lockdep_register_key(hal->srng_key + ring_id);
+}
+
+static void ath11k_hal_unregister_srng_key(struct ath11k_base *ab)
+{
+	struct ath11k_hal *hal = &ab->hal;
+	u32 ring_id;
+
+	for (ring_id = 0; ring_id < HAL_SRNG_RING_ID_MAX; ring_id++)
+		lockdep_unregister_key(hal->srng_key + ring_id);
+}
+
 int ath11k_hal_srng_init(struct ath11k_base *ab)
 {
 	struct ath11k_hal *hal = &ab->hal;
@@ -1256,6 +1275,8 @@ int ath11k_hal_srng_init(struct ath11k_base *ab)
 	if (ret)
 		goto err_free_cont_rdp;
 
+	ath11k_hal_register_srng_key(ab);
+
 	return 0;
 
 err_free_cont_rdp:
@@ -1270,6 +1291,7 @@ void ath11k_hal_srng_deinit(struct ath11k_base *ab)
 {
 	struct ath11k_hal *hal = &ab->hal;
 
+	ath11k_hal_unregister_srng_key(ab);
 	ath11k_hal_free_cont_rdp(ab);
 	ath11k_hal_free_cont_wrp(ab);
 	kfree(hal->srng_config);
diff --git a/drivers/net/wireless/ath/ath11k/hal.h b/drivers/net/wireless/ath/ath11k/hal.h
index 1f1b29cd0aa39..5fbfded8d546c 100644
--- a/drivers/net/wireless/ath/ath11k/hal.h
+++ b/drivers/net/wireless/ath/ath11k/hal.h
@@ -888,6 +888,8 @@ struct ath11k_hal {
 	/* shadow register configuration */
 	u32 shadow_reg_addr[HAL_SHADOW_NUM_REGS];
 	int num_shadow_reg_configured;
+
+	struct lock_class_key srng_key[HAL_SRNG_RING_ID_MAX];
 };
 
 u32 ath11k_hal_reo_qdesc_size(u32 ba_window_size, u8 tid);
-- 
2.34.1

[PATCH AUTOSEL 5.10 061/116] x86/mce: Allow instrumentation during task work queueing

[Sasha Levin]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit 4fbce464db81a42f9a57ee242d6150ec7f996415 ]

Fixes

  vmlinux.o: warning: objtool: do_machine_check()+0xdb1: call to queue_task_work() leaves .noinstr.text section

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-6-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/mce/core.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 14b34963eb1f7..34fffffaf8730 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -1443,6 +1443,14 @@ noinstr void do_machine_check(struct pt_regs *regs)
 	if (worst != MCE_AR_SEVERITY && !kill_it)
 		goto out;
 
+	/*
+	 * Enable instrumentation around the external facilities like
+	 * task_work_add() (via queue_task_work()), fixup_exception() etc.
+	 * For now, that is. Fixing this properly would need a lot more involved
+	 * reorganization.
+	 */
+	instrumentation_begin();
+
 	/* Fault was in user mode and we need to take some action */
 	if ((m.cs & 3) == 3) {
 		/* If this triggers there is no way to recover. Die hard. */
@@ -1468,6 +1476,9 @@ noinstr void do_machine_check(struct pt_regs *regs)
 		if (m.kflags & MCE_IN_KERNEL_COPYIN)
 			queue_task_work(&m, msg, kill_it);
 	}
+
+	instrumentation_end();
+
 out:
 	mce_wrmsrl(MSR_IA32_MCG_STATUS, 0);
 }
-- 
2.34.1

[PATCH AUTOSEL 5.10 062/116] x86/mce: Mark mce_panic() noinstr

[Sasha Levin]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit 3c7ce80a818fa7950be123cac80cd078e5ac1013 ]

And allow instrumentation inside it because it does calls to other
facilities which will not be tagged noinstr.

Fixes

  vmlinux.o: warning: objtool: do_machine_check()+0xc73: call to mce_panic() leaves .noinstr.text section

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-8-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/mce/core.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 34fffffaf8730..64d8a96a2bf1e 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -295,11 +295,17 @@ static void wait_for_panic(void)
 	panic("Panicing machine check CPU died");
 }
 
-static void mce_panic(const char *msg, struct mce *final, char *exp)
+static noinstr void mce_panic(const char *msg, struct mce *final, char *exp)
 {
-	int apei_err = 0;
 	struct llist_node *pending;
 	struct mce_evt_llist *l;
+	int apei_err = 0;
+
+	/*
+	 * Allow instrumentation around external facilities usage. Not that it
+	 * matters a whole lot since the machine is going to panic anyway.
+	 */
+	instrumentation_begin();
 
 	if (!fake_panic) {
 		/*
@@ -314,7 +320,7 @@ static void mce_panic(const char *msg, struct mce *final, char *exp)
 	} else {
 		/* Don't log too much for fake panic */
 		if (atomic_inc_return(&mce_fake_panicked) > 1)
-			return;
+			goto out;
 	}
 	pending = mce_gen_pool_prepare_records();
 	/* First print corrected ones that are still unlogged */
@@ -352,6 +358,9 @@ static void mce_panic(const char *msg, struct mce *final, char *exp)
 		panic(msg);
 	} else
 		pr_emerg(HW_ERR "Fake kernel panic: %s\n", msg);
+
+out:
+	instrumentation_end();
 }
 
 /* Support code for software error injection */
-- 
2.34.1

[PATCH AUTOSEL 5.10 063/116] x86/mce: Mark mce_end() noinstr

[Sasha Levin]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit b4813539d37fa31fed62cdfab7bd2dd8929c5b2e ]

It is called by the #MC handler which is noinstr.

Fixes

  vmlinux.o: warning: objtool: do_machine_check()+0xbd6: call to memset() leaves .noinstr.text section

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-9-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/mce/core.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 64d8a96a2bf1e..2a608f0819765 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -1070,10 +1070,13 @@ static int mce_start(int *no_way_out)
  * Synchronize between CPUs after main scanning loop.
  * This invokes the bulk of the Monarch processing.
  */
-static int mce_end(int order)
+static noinstr int mce_end(int order)
 {
-	int ret = -1;
 	u64 timeout = (u64)mca_cfg.monarch_timeout * NSEC_PER_USEC;
+	int ret = -1;
+
+	/* Allow instrumentation around external facilities. */
+	instrumentation_begin();
 
 	if (!timeout)
 		goto reset;
@@ -1117,7 +1120,8 @@ static int mce_end(int order)
 		/*
 		 * Don't reset anything. That's done by the Monarch.
 		 */
-		return 0;
+		ret = 0;
+		goto out;
 	}
 
 	/*
@@ -1132,6 +1136,10 @@ static int mce_end(int order)
 	 * Let others run again.
 	 */
 	atomic_set(&mce_executing, 0);
+
+out:
+	instrumentation_end();
+
 	return ret;
 }
 
-- 
2.34.1

[PATCH AUTOSEL 5.10 064/116] x86/mce: Mark mce_read_aux() noinstr

[Sasha Levin]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit db6c996d6ce45dfb44891f0824a65ecec216f47a ]

Fixes

  vmlinux.o: warning: objtool: do_machine_check()+0x681: call to mce_read_aux() leaves .noinstr.text section

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-10-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/mce/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 2a608f0819765..5cf1a024408bf 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -691,7 +691,7 @@ static struct notifier_block mce_default_nb = {
 /*
  * Read ADDR and MISC registers.
  */
-static void mce_read_aux(struct mce *m, int i)
+static noinstr void mce_read_aux(struct mce *m, int i)
 {
 	if (m->status & MCI_STATUS_MISCV)
 		m->misc = mce_rdmsrl(msr_ops.misc(i));
-- 
2.34.1

[PATCH AUTOSEL 5.10 065/116] net: bonding: debug: avoid printing debug logs when bond is not notifying peers

[Sasha Levin]

From: Suresh Kumar <surkumar@redhat.com>

[ Upstream commit fee32de284ac277ba434a2d59f8ce46528ff3946 ]

Currently "bond_should_notify_peers: slave ..." messages are printed whenever
"bond_should_notify_peers" function is called.

+++
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Received LACPDU on port 1
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Rx Machine: Port=1, Last State=6, Curr State=6
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): partner sync=1
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
...
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Received LACPDU on port 2
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Rx Machine: Port=2, Last State=6, Curr State=6
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): partner sync=1
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
+++

This is confusing and can also clutter up debug logs.
Print logs only when the peer notification happens.

Signed-off-by: Suresh Kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 645c7cabcbe4d..e2e6a69adab4b 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1061,9 +1061,6 @@ static bool bond_should_notify_peers(struct bonding *bond)
 	slave = rcu_dereference(bond->curr_active_slave);
 	rcu_read_unlock();
 
-	netdev_dbg(bond->dev, "bond_should_notify_peers: slave %s\n",
-		   slave ? slave->dev->name : "NULL");
-
 	if (!slave || !bond->send_peer_notif ||
 	    bond->send_peer_notif %
 	    max(1, bond->params.peer_notif_delay) != 0 ||
@@ -1071,6 +1068,9 @@ static bool bond_should_notify_peers(struct bonding *bond)
 	    test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
 		return false;
 
+	netdev_dbg(bond->dev, "bond_should_notify_peers: slave %s\n",
+		   slave ? slave->dev->name : "NULL");
+
 	return true;
 }
 
-- 
2.34.1

[PATCH AUTOSEL 5.10 066/116] bpf: Do not WARN in bpf_warn_invalid_xdp_action()

[Sasha Levin]

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit 2cbad989033bff0256675c38f96f5faab852af4b ]

The WARN_ONCE() in bpf_warn_invalid_xdp_action() can be triggered by
any bugged program, and even attaching a correct program to a NIC
not supporting the given action.

The resulting splat, beyond polluting the logs, fouls automated tools:
e.g. a syzkaller reproducers using an XDP program returning an
unsupported action will never pass validation.

Replace the WARN_ONCE with a less intrusive pr_warn_once().

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/016ceec56e4817ebb2a9e35ce794d5c917df572c.1638189075.git.pabeni@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/core/filter.c b/net/core/filter.c
index abd58dce49bbc..578b0bc78ac10 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -7919,9 +7919,9 @@ void bpf_warn_invalid_xdp_action(u32 act)
 {
 	const u32 act_max = XDP_REDIRECT;
 
-	WARN_ONCE(1, "%s XDP return value %u, expect packet loss!\n",
-		  act > act_max ? "Illegal" : "Driver unsupported",
-		  act);
+	pr_warn_once("%s XDP return value %u, expect packet loss!\n",
+		     act > act_max ? "Illegal" : "Driver unsupported",
+		     act);
 }
 EXPORT_SYMBOL_GPL(bpf_warn_invalid_xdp_action);
 
-- 
2.34.1

[PATCH AUTOSEL 5.10 067/116] HID: quirks: Allow inverting the absolute X/Y values

[Sasha Levin]

From: Alistair Francis <alistair@alistair23.me>

[ Upstream commit fd8d135b2c5e88662f2729e034913f183455a667 ]

Add a HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirk that can be used
to invert the X/Y values.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
[bentiss: silence checkpatch warning]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211208124045.61815-2-alistair@alistair23.me
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-input.c | 6 ++++++
 include/linux/hid.h     | 2 ++
 2 files changed, 8 insertions(+)

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 580d378342c41..eb53855898c8d 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -1288,6 +1288,12 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
 
 	input = field->hidinput->input;
 
+	if (usage->type == EV_ABS &&
+	    (((*quirks & HID_QUIRK_X_INVERT) && usage->code == ABS_X) ||
+	     ((*quirks & HID_QUIRK_Y_INVERT) && usage->code == ABS_Y))) {
+		value = field->logical_maximum - value;
+	}
+
 	if (usage->hat_min < usage->hat_max || usage->hat_dir) {
 		int hat_dir = usage->hat_dir;
 		if (!hat_dir)
diff --git a/include/linux/hid.h b/include/linux/hid.h
index fc56d53cc68bf..2ba33d708942c 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -345,6 +345,8 @@ struct hid_item {
 /* BIT(9) reserved for backward compatibility, was NO_INIT_INPUT_REPORTS */
 #define HID_QUIRK_ALWAYS_POLL			BIT(10)
 #define HID_QUIRK_INPUT_PER_APP			BIT(11)
+#define HID_QUIRK_X_INVERT			BIT(12)
+#define HID_QUIRK_Y_INVERT			BIT(13)
 #define HID_QUIRK_SKIP_OUTPUT_REPORTS		BIT(16)
 #define HID_QUIRK_SKIP_OUTPUT_REPORT_ID		BIT(17)
 #define HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP	BIT(18)
-- 
2.34.1

[PATCH AUTOSEL 5.10 068/116] media: igorplugusb: receiver overflow should be reported

[Sasha Levin]

From: Sean Young <sean@mess.org>

[ Upstream commit 8fede658e7ddb605bbd68ed38067ddb0af033db4 ]

Without this, some IR will be missing mid-stream and we might decode
something which never really occurred.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/rc/igorplugusb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/rc/igorplugusb.c b/drivers/media/rc/igorplugusb.c
index effaa5751d6c9..3e9988ee785f0 100644
--- a/drivers/media/rc/igorplugusb.c
+++ b/drivers/media/rc/igorplugusb.c
@@ -64,9 +64,11 @@ static void igorplugusb_irdata(struct igorplugusb *ir, unsigned len)
 	if (start >= len) {
 		dev_err(ir->dev, "receive overflow invalid: %u", overflow);
 	} else {
-		if (overflow > 0)
+		if (overflow > 0) {
 			dev_warn(ir->dev, "receive overflow, at least %u lost",
 								overflow);
+			ir_raw_event_reset(ir->rc);
+		}
 
 		do {
 			rawir.duration = ir->buf_in[i] * 85;
-- 
2.34.1

[PATCH AUTOSEL 5.10 069/116] media: saa7146: hexium_gemini: Fix a NULL pointer dereference in hexium_attach()

[Sasha Levin]

From: Zhou Qingyang <zhou1615@umn.edu>

[ Upstream commit 3af86b046933ba513d08399dba0d4d8b50d607d0 ]

In hexium_attach(dev, info), saa7146_vv_init() is called to allocate
a new memory for dev->vv_data. saa7146_vv_release() will be called on
failure of saa7146_register_device(). There is a dereference of
dev->vv_data in saa7146_vv_release(), which could lead to a NULL
pointer dereference on failure of saa7146_vv_init().

Fix this bug by adding a check of saa7146_vv_init().

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_VIDEO_HEXIUM_GEMINI=m show no new warnings,
and our static analyzer no longer warns about this code.

Link: https://lore.kernel.org/linux-media/20211203154030.111210-1-zhou1615@umn.edu
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/common/saa7146/saa7146_fops.c | 2 +-
 drivers/media/pci/saa7146/hexium_gemini.c   | 7 ++++++-
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/media/common/saa7146/saa7146_fops.c b/drivers/media/common/saa7146/saa7146_fops.c
index d6531874faa65..8047e305f3d01 100644
--- a/drivers/media/common/saa7146/saa7146_fops.c
+++ b/drivers/media/common/saa7146/saa7146_fops.c
@@ -523,7 +523,7 @@ int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv)
 		ERR("out of memory. aborting.\n");
 		kfree(vv);
 		v4l2_ctrl_handler_free(hdl);
-		return -1;
+		return -ENOMEM;
 	}
 
 	saa7146_video_uops.init(dev,vv);
diff --git a/drivers/media/pci/saa7146/hexium_gemini.c b/drivers/media/pci/saa7146/hexium_gemini.c
index 2214c74bbbf15..3947701cd6c7e 100644
--- a/drivers/media/pci/saa7146/hexium_gemini.c
+++ b/drivers/media/pci/saa7146/hexium_gemini.c
@@ -284,7 +284,12 @@ static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_d
 	hexium_set_input(hexium, 0);
 	hexium->cur_input = 0;
 
-	saa7146_vv_init(dev, &vv_data);
+	ret = saa7146_vv_init(dev, &vv_data);
+	if (ret) {
+		i2c_del_adapter(&hexium->i2c_adapter);
+		kfree(hexium);
+		return ret;
+	}
 
 	vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
 	vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
-- 
2.34.1

[PATCH AUTOSEL 5.10 070/116] mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO

[Sasha Levin]

From: Ulf Hansson <ulf.hansson@linaro.org>

[ Upstream commit 8c3e5b74b9e2146f564905e50ca716591c76d4f1 ]

The mmc core takes a specific path to support initializing of a
non-standard SDIO card. This is triggered by looking for the card-quirk,
MMC_QUIRK_NONSTD_SDIO.

In mmc_sdio_init_card() this gets rather messy, as it causes the code to
bail out earlier, compared to the usual path. This leads to that the OCR
doesn't get saved properly in card->ocr. Fortunately, only omap_hsmmc has
been using the MMC_QUIRK_NONSTD_SDIO and is dealing with the issue, by
assigning a hardcoded value (0x80) to card->ocr from an ->init_card() ops.

To make the behaviour consistent, let's instead rely on the core to save
the OCR in card->ocr during initialization.

Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/e7936cff7fc24d187ef2680d3b4edb0ade58f293.1636564631.git.hns@goldelico.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/core/sdio.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 1b0853a82189a..99a4ce68d82f1 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -708,6 +708,8 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 	if (host->ops->init_card)
 		host->ops->init_card(host, card);
 
+	card->ocr = ocr_card;
+
 	/*
 	 * If the host and card support UHS-I mode request the card
 	 * to switch to 1.8V signaling level.  No 1.8v signalling if
@@ -820,7 +822,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 			goto mismatch;
 		}
 	}
-	card->ocr = ocr_card;
+
 	mmc_fixup_device(card, sdio_fixup_methods);
 
 	if (card->type == MMC_TYPE_SD_COMBO) {
-- 
2.34.1

[PATCH AUTOSEL 5.10 071/116] audit: ensure userspace is penalized the same as the kernel when under pressure

[Sasha Levin]

From: Paul Moore <paul@paul-moore.com>

[ Upstream commit 8f110f530635af44fff1f4ee100ecef0bac62510 ]

Due to the audit control mutex necessary for serializing audit
userspace messages we haven't been able to block/penalize userspace
processes that attempt to send audit records while the system is
under audit pressure.  The result is that privileged userspace
applications have a priority boost with respect to audit as they are
not bound by the same audit queue throttling as the other tasks on
the system.

This patch attempts to restore some balance to the system when under
audit pressure by blocking these privileged userspace tasks after
they have finished their audit processing, and dropped the audit
control mutex, but before they return to userspace.

Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/audit.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/kernel/audit.c b/kernel/audit.c
index d784000921da3..2a38cbaf3ddb7 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -1540,6 +1540,20 @@ static void audit_receive(struct sk_buff  *skb)
 		nlh = nlmsg_next(nlh, &len);
 	}
 	audit_ctl_unlock();
+
+	/* can't block with the ctrl lock, so penalize the sender now */
+	if (audit_backlog_limit &&
+	    (skb_queue_len(&audit_queue) > audit_backlog_limit)) {
+		DECLARE_WAITQUEUE(wait, current);
+
+		/* wake kauditd to try and flush the queue */
+		wake_up_interruptible(&kauditd_wait);
+
+		add_wait_queue_exclusive(&audit_backlog_wait, &wait);
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(audit_backlog_wait_time);
+		remove_wait_queue(&audit_backlog_wait, &wait);
+	}
 }
 
 /* Log information about who is connecting to the audit multicast socket */
@@ -1824,7 +1838,9 @@ struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask,
 	 *    task_tgid_vnr() since auditd_pid is set in audit_receive_msg()
 	 *    using a PID anchored in the caller's namespace
 	 * 2. generator holding the audit_cmd_mutex - we don't want to block
-	 *    while holding the mutex */
+	 *    while holding the mutex, although we do penalize the sender
+	 *    later in audit_receive() when it is safe to block
+	 */
 	if (!(auditd_test_task(current) || audit_ctl_owner_current())) {
 		long stime = audit_backlog_wait_time;
 
-- 
2.34.1

[PATCH AUTOSEL 5.10 072/116] arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus

[Sasha Levin]

From: Biwen Li <biwen.li@nxp.com>

[ Upstream commit cbe9d948eadfe352ad45495a7cc5bf20a1b29d90 ]

The i2c rtc is on i2c2 bus not i2c1 bus, so fix it in dts.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Li Yang <leoyang.lil@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 13cdc958ba3ea..71858c9376c25 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -261,11 +261,6 @@ temperature-sensor@4c {
 				vcc-supply = <&sb_3v3>;
 			};
 
-			rtc@51 {
-				compatible = "nxp,pcf2129";
-				reg = <0x51>;
-			};
-
 			eeprom@56 {
 				compatible = "atmel,24c512";
 				reg = <0x56>;
@@ -307,6 +302,15 @@ mux: mux-controller {
 
 };
 
+&i2c1 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+	};
+};
+
 &enetc_port1 {
 	phy-handle = <&qds_phy1>;
 	phy-connection-type = "rgmii-id";
-- 
2.34.1

[PATCH AUTOSEL 5.10 073/116] arm64: tegra: Adjust length of CCPLEX cluster MMIO region

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit 2b14cbd643feea5fc17c6e8bead4e71088c69acd ]

The Tegra186 CCPLEX cluster register region is 4 MiB is length, not 4
MiB - 1. This was likely presumed to be the "limit" rather than length.
Fix it up.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra186.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 0c46ab7bbbf37..eec6418ecdb1a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -985,7 +985,7 @@ sdmmc3_1v8: sdmmc3-1v8 {
 
 	ccplex@e000000 {
 		compatible = "nvidia,tegra186-ccplex-cluster";
-		reg = <0x0 0x0e000000 0x0 0x3fffff>;
+		reg = <0x0 0x0e000000 0x0 0x400000>;
 
 		nvidia,bpmp = <&bpmp>;
 	};
-- 
2.34.1

[PATCH AUTOSEL 5.10 074/116] PM: runtime: Add safety net to supplier device release

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit d1579e61192e0e686faa4208500ef4c3b529b16c ]

Because refcount_dec_not_one() returns true if the target refcount
becomes saturated, it is generally unsafe to use its return value as
a loop termination condition, but that is what happens when a device
link's supplier device is released during runtime PM suspend
operations and on device link removal.

To address this, introduce pm_runtime_release_supplier() to be used
in the above cases which will check the supplier device's runtime
PM usage counter in addition to the refcount_dec_not_one() return
value, so the loop can be terminated in case the rpm_active refcount
value becomes invalid, and update the code in question to use it as
appropriate.

This change is not expected to have any visible functional impact.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/core.c          |  3 +--
 drivers/base/power/runtime.c | 41 ++++++++++++++++++++++++++----------
 include/linux/pm_runtime.h   |  3 +++
 3 files changed, 34 insertions(+), 13 deletions(-)

diff --git a/drivers/base/core.c b/drivers/base/core.c
index 389d13616d1df..c0566aff53551 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -348,8 +348,7 @@ static void device_link_release_fn(struct work_struct *work)
 	/* Ensure that all references to the link object have been dropped. */
 	device_link_synchronize_removal();
 
-	while (refcount_dec_not_one(&link->rpm_active))
-		pm_runtime_put(link->supplier);
+	pm_runtime_release_supplier(link, true);
 
 	put_device(link->consumer);
 	put_device(link->supplier);
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index bc649da4899a0..1573319404888 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -305,19 +305,40 @@ static int rpm_get_suppliers(struct device *dev)
 	return 0;
 }
 
+/**
+ * pm_runtime_release_supplier - Drop references to device link's supplier.
+ * @link: Target device link.
+ * @check_idle: Whether or not to check if the supplier device is idle.
+ *
+ * Drop all runtime PM references associated with @link to its supplier device
+ * and if @check_idle is set, check if that device is idle (and so it can be
+ * suspended).
+ */
+void pm_runtime_release_supplier(struct device_link *link, bool check_idle)
+{
+	struct device *supplier = link->supplier;
+
+	/*
+	 * The additional power.usage_count check is a safety net in case
+	 * the rpm_active refcount becomes saturated, in which case
+	 * refcount_dec_not_one() would return true forever, but it is not
+	 * strictly necessary.
+	 */
+	while (refcount_dec_not_one(&link->rpm_active) &&
+	       atomic_read(&supplier->power.usage_count) > 0)
+		pm_runtime_put_noidle(supplier);
+
+	if (check_idle)
+		pm_request_idle(supplier);
+}
+
 static void __rpm_put_suppliers(struct device *dev, bool try_to_suspend)
 {
 	struct device_link *link;
 
 	list_for_each_entry_rcu(link, &dev->links.suppliers, c_node,
-				device_links_read_lock_held()) {
-
-		while (refcount_dec_not_one(&link->rpm_active))
-			pm_runtime_put_noidle(link->supplier);
-
-		if (try_to_suspend)
-			pm_request_idle(link->supplier);
-	}
+				device_links_read_lock_held())
+		pm_runtime_release_supplier(link, try_to_suspend);
 }
 
 static void rpm_put_suppliers(struct device *dev)
@@ -1755,9 +1776,7 @@ void pm_runtime_drop_link(struct device_link *link)
 		return;
 
 	pm_runtime_drop_link_count(link->consumer);
-
-	while (refcount_dec_not_one(&link->rpm_active))
-		pm_runtime_put(link->supplier);
+	pm_runtime_release_supplier(link, true);
 }
 
 static bool pm_runtime_need_not_resume(struct device *dev)
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index 161acd4ede448..30091ab5de287 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -58,6 +58,7 @@ extern void pm_runtime_get_suppliers(struct device *dev);
 extern void pm_runtime_put_suppliers(struct device *dev);
 extern void pm_runtime_new_link(struct device *dev);
 extern void pm_runtime_drop_link(struct device_link *link);
+extern void pm_runtime_release_supplier(struct device_link *link, bool check_idle);
 
 /**
  * pm_runtime_get_if_in_use - Conditionally bump up runtime PM usage counter.
@@ -279,6 +280,8 @@ static inline void pm_runtime_get_suppliers(struct device *dev) {}
 static inline void pm_runtime_put_suppliers(struct device *dev) {}
 static inline void pm_runtime_new_link(struct device *dev) {}
 static inline void pm_runtime_drop_link(struct device_link *link) {}
+static inline void pm_runtime_release_supplier(struct device_link *link,
+					       bool check_idle) {}
 
 #endif /* !CONFIG_PM */
 
-- 
2.34.1

[PATCH AUTOSEL 5.10 075/116] cpufreq: Fix initialization of min and max frequency QoS requests

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit 521223d8b3ec078f670c7c35a1a04b1b2af07966 ]

The min and max frequency QoS requests in the cpufreq core are
initialized to whatever the current min and max frequency values are
at the init time, but if any of these values change later (for
example, cpuinfo.max_freq is updated by the driver), these initial
request values will be limiting the CPU frequency unnecessarily
unless they are changed by user space via sysfs.

To address this, initialize min_freq_req and max_freq_req to
FREQ_QOS_MIN_DEFAULT_VALUE and FREQ_QOS_MAX_DEFAULT_VALUE,
respectively, so they don't really limit anything until user
space updates them.

Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/cpufreq.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 8e159fb6af9cd..30dafe8fc5054 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1400,7 +1400,7 @@ static int cpufreq_online(unsigned int cpu)
 
 		ret = freq_qos_add_request(&policy->constraints,
 					   policy->min_freq_req, FREQ_QOS_MIN,
-					   policy->min);
+					   FREQ_QOS_MIN_DEFAULT_VALUE);
 		if (ret < 0) {
 			/*
 			 * So we don't call freq_qos_remove_request() for an
@@ -1420,7 +1420,7 @@ static int cpufreq_online(unsigned int cpu)
 
 		ret = freq_qos_add_request(&policy->constraints,
 					   policy->max_freq_req, FREQ_QOS_MAX,
-					   policy->max);
+					   FREQ_QOS_MAX_DEFAULT_VALUE);
 		if (ret < 0) {
 			policy->max_freq_req = NULL;
 			goto out_destroy_policy;
-- 
2.34.1

[PATCH AUTOSEL 5.10 076/116] usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0

[Sasha Levin]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit 00558586382891540c59c9febc671062425a6e47 ]

When a new USB device gets plugged to nested hubs, the affected hub,
which connects to usb 2-1.4-port2, doesn't report there's any change,
hence the nested hubs go back to runtime suspend like nothing happened:
[  281.032951] usb usb2: usb wakeup-resume
[  281.032959] usb usb2: usb auto-resume
[  281.032974] hub 2-0:1.0: hub_resume
[  281.033011] usb usb2-port1: status 0263 change 0000
[  281.033077] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[  281.049797] usb 2-1: usb wakeup-resume
[  281.069800] usb 2-1: Waited 0ms for CONNECT
[  281.069810] usb 2-1: finish resume
[  281.070026] hub 2-1:1.0: hub_resume
[  281.070250] usb 2-1-port4: status 0203 change 0000
[  281.070272] usb usb2-port1: resume, status 0
[  281.070282] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
[  281.089813] usb 2-1.4: usb wakeup-resume
[  281.109792] usb 2-1.4: Waited 0ms for CONNECT
[  281.109801] usb 2-1.4: finish resume
[  281.109991] hub 2-1.4:1.0: hub_resume
[  281.110147] usb 2-1.4-port2: status 0263 change 0000
[  281.110234] usb 2-1-port4: resume, status 0
[  281.110239] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s
[  281.110266] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000
[  281.110426] hub 2-1.4:1.0: hub_suspend
[  281.110565] usb 2-1.4: usb auto-suspend, wakeup 1
[  281.130998] hub 2-1:1.0: hub_suspend
[  281.137788] usb 2-1: usb auto-suspend, wakeup 1
[  281.142935] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[  281.177828] usb 2-1: usb wakeup-resume
[  281.197839] usb 2-1: Waited 0ms for CONNECT
[  281.197850] usb 2-1: finish resume
[  281.197984] hub 2-1:1.0: hub_resume
[  281.198203] usb 2-1-port4: status 0203 change 0000
[  281.198228] usb usb2-port1: resume, status 0
[  281.198237] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
[  281.217835] usb 2-1.4: usb wakeup-resume
[  281.237834] usb 2-1.4: Waited 0ms for CONNECT
[  281.237845] usb 2-1.4: finish resume
[  281.237990] hub 2-1.4:1.0: hub_resume
[  281.238067] usb 2-1.4-port2: status 0263 change 0000
[  281.238148] usb 2-1-port4: resume, status 0
[  281.238152] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s
[  281.238166] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000
[  281.238385] hub 2-1.4:1.0: hub_suspend
[  281.238523] usb 2-1.4: usb auto-suspend, wakeup 1
[  281.258076] hub 2-1:1.0: hub_suspend
[  281.265744] usb 2-1: usb auto-suspend, wakeup 1
[  281.285976] hub 2-0:1.0: hub_suspend
[  281.285988] usb usb2: bus auto-suspend, wakeup 1

USB 3.2 spec, 9.2.5.4 "Changing Function Suspend State" says that "If
the link is in a non-U0 state, then the device must transition the link
to U0 prior to sending the remote wake message", but the hub only
transits the link to U0 after signaling remote wakeup.

So be more forgiving and use a 20ms delay to let the link transit to U0
for remote wakeup.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20211215120108.336597-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/core/hub.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 3f406519da58d..8af06a933e289 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1109,7 +1109,10 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 		} else {
 			hub_power_on(hub, true);
 		}
-	}
+	/* Give some time on remote wakeup to let links to transit to U0 */
+	} else if (hub_is_superspeed(hub->hdev))
+		msleep(20);
+
  init2:
 
 	/*
-- 
2.34.1

[PATCH AUTOSEL 5.10 077/116] ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream

[Sasha Levin]

From: Zekun Shen <bruceshenzk@gmail.com>

[ Upstream commit 6ce708f54cc8d73beca213cec66ede5ce100a781 ]

Large pkt_len can lead to out-out-bound memcpy. Current
ath9k_hif_usb_rx_stream allows combining the content of two urb
inputs to one pkt. The first input can indicate the size of the
pkt. Any remaining size is saved in hif_dev->rx_remain_len.
While processing the next input, memcpy is used with rx_remain_len.

4-byte pkt_len can go up to 0xffff, while a single input is 0x4000
maximum in size (MAX_RX_BUF_SIZE). Thus, the patch adds a check for
pkt_len which must not exceed 2 * MAX_RX_BUG_SIZE.

BUG: KASAN: slab-out-of-bounds in ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
Read of size 46393 at addr ffff888018798000 by task kworker/0:1/23

CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.6.0 #63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
 <IRQ>
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 __kasan_report.cold+0x37/0x7c
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 kasan_report+0xe/0x20
 check_memory_region+0x15a/0x1d0
 memcpy+0x20/0x50
 ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 ? hif_usb_mgmt_cb+0x2d9/0x2d9 [ath9k_htc]
 ? _raw_spin_lock_irqsave+0x7b/0xd0
 ? _raw_spin_trylock_bh+0x120/0x120
 ? __usb_unanchor_urb+0x12f/0x210
 __usb_hcd_giveback_urb+0x1e4/0x380
 usb_giveback_urb_bh+0x241/0x4f0
 ? __hrtimer_run_queues+0x316/0x740
 ? __usb_hcd_giveback_urb+0x380/0x380
 tasklet_action_common.isra.0+0x135/0x330
 __do_softirq+0x18c/0x634
 irq_exit+0x114/0x140
 smp_apic_timer_interrupt+0xde/0x380
 apic_timer_interrupt+0xf/0x20

I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.

After fixing the value of pkt_tag to ATH_USB_RX_STREAM_MODE_TAG in QEMU
emulation, I found the KASAN report. The bug is triggerable whenever
pkt_len is above two MAX_RX_BUG_SIZE. I used the same input that crashes
to test the driver works when applying the patch.

Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/YXsidrRuK6zBJicZ@10-18-43-117.dynapool.wireless.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 860da13bfb6ac..f06eec99de688 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -590,6 +590,13 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
 			return;
 		}
 
+		if (pkt_len > 2 * MAX_RX_BUF_SIZE) {
+			dev_err(&hif_dev->udev->dev,
+				"ath9k_htc: invalid pkt_len (%x)\n", pkt_len);
+			RX_STAT_INC(skb_dropped);
+			return;
+		}
+
 		pad_len = 4 - (pkt_len & 0x3);
 		if (pad_len == 4)
 			pad_len = 0;
-- 
2.34.1

[PATCH AUTOSEL 5.10 078/116] rtw88: 8822c: update rx settings to prevent potential hw deadlock

[Sasha Levin]

From: Po-Hao Huang <phhuang@realtek.com>

[ Upstream commit c1afb26727d9e507d3e17a9890e7aaf7fc85cd55 ]

These settings enables mac to detect and recover when rx fifo
circuit deadlock occurs. Previous version missed this, so we fix it.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211217012708.8623-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw88/main.c     | 2 +-
 drivers/net/wireless/realtek/rtw88/rtw8821c.h | 2 +-
 drivers/net/wireless/realtek/rtw88/rtw8822b.c | 2 +-
 drivers/net/wireless/realtek/rtw88/rtw8822c.c | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index 565efd8806247..2ef1416899f03 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -1652,7 +1652,7 @@ int rtw_core_init(struct rtw_dev *rtwdev)
 
 	/* default rx filter setting */
 	rtwdev->hal.rcr = BIT_APP_FCS | BIT_APP_MIC | BIT_APP_ICV |
-			  BIT_HTC_LOC_CTRL | BIT_APP_PHYSTS |
+			  BIT_PKTCTL_DLEN | BIT_HTC_LOC_CTRL | BIT_APP_PHYSTS |
 			  BIT_AB | BIT_AM | BIT_APM;
 
 	ret = rtw_load_firmware(rtwdev, RTW_NORMAL_FW);
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821c.h b/drivers/net/wireless/realtek/rtw88/rtw8821c.h
index bd01e82b6bcd0..8d1e8ff71d7ef 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8821c.h
+++ b/drivers/net/wireless/realtek/rtw88/rtw8821c.h
@@ -131,7 +131,7 @@ _rtw_write32s_mask(struct rtw_dev *rtwdev, u32 addr, u32 mask, u32 data)
 #define WLAN_TX_FUNC_CFG2		0x30
 #define WLAN_MAC_OPT_NORM_FUNC1		0x98
 #define WLAN_MAC_OPT_LB_FUNC1		0x80
-#define WLAN_MAC_OPT_FUNC2		0x30810041
+#define WLAN_MAC_OPT_FUNC2		0xb0810041
 
 #define WLAN_SIFS_CFG	(WLAN_SIFS_CCK_CONT_TX | \
 			(WLAN_SIFS_OFDM_CONT_TX << BIT_SHIFT_SIFS_OFDM_CTX) | \
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822b.c b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
index 22d0dd640ac94..dbfd67c3f598c 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822b.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
@@ -204,7 +204,7 @@ static void rtw8822b_phy_set_param(struct rtw_dev *rtwdev)
 #define WLAN_TX_FUNC_CFG2		0x30
 #define WLAN_MAC_OPT_NORM_FUNC1		0x98
 #define WLAN_MAC_OPT_LB_FUNC1		0x80
-#define WLAN_MAC_OPT_FUNC2		0x30810041
+#define WLAN_MAC_OPT_FUNC2		0xb0810041
 
 #define WLAN_SIFS_CFG	(WLAN_SIFS_CCK_CONT_TX | \
 			(WLAN_SIFS_OFDM_CONT_TX << BIT_SHIFT_SIFS_OFDM_CTX) | \
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
index 79ad6232dce83..cee586335552d 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
@@ -1248,7 +1248,7 @@ static void rtw8822c_phy_set_param(struct rtw_dev *rtwdev)
 #define WLAN_TX_FUNC_CFG2		0x30
 #define WLAN_MAC_OPT_NORM_FUNC1		0x98
 #define WLAN_MAC_OPT_LB_FUNC1		0x80
-#define WLAN_MAC_OPT_FUNC2		0x30810041
+#define WLAN_MAC_OPT_FUNC2		0xb0810041
 #define WLAN_MAC_INT_MIG_CFG		0x33330000
 
 #define WLAN_SIFS_CFG	(WLAN_SIFS_CCK_CONT_TX | \
-- 
2.34.1

[PATCH AUTOSEL 5.10 079/116] PM: AVS: qcom-cpr: Use div64_ul instead of do_div

[Sasha Levin]

From: Changcheng Deng <deng.changcheng@zte.com.cn>

[ Upstream commit 92c550f9ffd2884bb5def52b5c0485a35e452784 ]

do_div() does a 64-by-32 division. Here the divisor is an unsigned long
which on some platforms is 64 bit wide. So use div64_ul instead of do_div
to avoid a possible truncation.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211125014311.45942-1-deng.changcheng@zte.com.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/qcom/cpr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/qcom/cpr.c b/drivers/soc/qcom/cpr.c
index b24cc77d1889f..6298561bc29c9 100644
--- a/drivers/soc/qcom/cpr.c
+++ b/drivers/soc/qcom/cpr.c
@@ -1043,7 +1043,7 @@ static int cpr_interpolate(const struct corner *corner, int step_volt,
 		return corner->uV;
 
 	temp = f_diff * (uV_high - uV_low);
-	do_div(temp, f_high - f_low);
+	temp = div64_ul(temp, f_high - f_low);
 
 	/*
 	 * max_volt_scale has units of uV/MHz while freq values
-- 
2.34.1

[PATCH AUTOSEL 5.10 080/116] iwlwifi: fix leaks/bad data after failed firmware load

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit ab07506b0454bea606095951e19e72c282bfbb42 ]

If firmware load fails after having loaded some parts of the
firmware, e.g. the IML image, then this would leak. For the
host command list we'd end up running into a WARN on the next
attempt to load another firmware image.

Fix this by calling iwl_dealloc_ucode() on failures, and make
that also clear the data so we start fresh on the next round.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.1f742f0eb58a.I1315f22f6aa632d94ae2069f85e1bca5e734dce0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
index be214f39f52be..4bdfd6afa7324 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
@@ -185,6 +185,9 @@ static void iwl_dealloc_ucode(struct iwl_drv *drv)
 
 	for (i = 0; i < IWL_UCODE_TYPE_MAX; i++)
 		iwl_free_fw_img(drv, drv->fw.img + i);
+
+	/* clear the data for the aborted load case */
+	memset(&drv->fw, 0, sizeof(drv->fw));
 }
 
 static int iwl_alloc_fw_desc(struct iwl_drv *drv, struct fw_desc *desc,
@@ -1365,6 +1368,7 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
 	int i;
 	bool load_module = false;
 	bool usniffer_images = false;
+	bool failure = true;
 
 	fw->ucode_capa.max_probe_length = IWL_DEFAULT_MAX_PROBE_LENGTH;
 	fw->ucode_capa.standard_phy_calibration_size =
@@ -1634,6 +1638,7 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
 				op->name, err);
 #endif
 	}
+	failure = false;
 	goto free;
 
  try_again:
@@ -1649,6 +1654,9 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
 	complete(&drv->request_firmware_complete);
 	device_release_driver(drv->trans->dev);
  free:
+	if (failure)
+		iwl_dealloc_ucode(drv);
+
 	if (pieces) {
 		for (i = 0; i < ARRAY_SIZE(pieces->img); i++)
 			kfree(pieces->img[i].sec);
-- 
2.34.1

[PATCH AUTOSEL 5.10 081/116] iwlwifi: remove module loading failure message

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 6518f83ffa51131daaf439b66094f684da3fb0ae ]

When CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, iwlwifi crashes
when the opmode module cannot be loaded, due to completing
the completion before using drv->dev, which can then already
be freed.

Fix this by removing the (fairly useless) message. Moving the
completion later causes a deadlock instead, so that's not an
option.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20211210091245.289008-2-luca@coelho.fi
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
index 4bdfd6afa7324..30c6d7b18599a 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
@@ -1629,15 +1629,8 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
 	 * else from proceeding if the module fails to load
 	 * or hangs loading.
 	 */
-	if (load_module) {
+	if (load_module)
 		request_module("%s", op->name);
-#ifdef CONFIG_IWLWIFI_OPMODE_MODULAR
-		if (err)
-			IWL_ERR(drv,
-				"failed to load module %s (error %d), is dynamic loading enabled?\n",
-				op->name, err);
-#endif
-	}
 	failure = false;
 	goto free;
 
-- 
2.34.1

[PATCH AUTOSEL 5.10 082/116] iwlwifi: mvm: Fix calculation of frame length

[Sasha Levin]

From: Ilan Peer <ilan.peer@intel.com>

[ Upstream commit 40a0b38d7a7f91a6027287e0df54f5f547e8d27e ]

The RADA might include in the Rx frame the MIC and CRC bytes.
These bytes should be removed for non monitor interfaces and
should not be passed to mac80211.

Fix the Rx processing to remove the extra bytes on non monitor
cases.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.098be12c801e.I1d81733d8a75b84c3b20eb6e0d14ab3405ca6a86@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
index 838734fec5023..86b3fb321dfdd 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
@@ -177,12 +177,39 @@ static int iwl_mvm_create_skb(struct iwl_mvm *mvm, struct sk_buff *skb,
 	struct iwl_rx_mpdu_desc *desc = (void *)pkt->data;
 	unsigned int headlen, fraglen, pad_len = 0;
 	unsigned int hdrlen = ieee80211_hdrlen(hdr->frame_control);
+	u8 mic_crc_len = u8_get_bits(desc->mac_flags1,
+				     IWL_RX_MPDU_MFLG1_MIC_CRC_LEN_MASK) << 1;
 
 	if (desc->mac_flags2 & IWL_RX_MPDU_MFLG2_PAD) {
 		len -= 2;
 		pad_len = 2;
 	}
 
+	/*
+	 * For non monitor interface strip the bytes the RADA might not have
+	 * removed. As monitor interface cannot exist with other interfaces
+	 * this removal is safe.
+	 */
+	if (mic_crc_len && !ieee80211_hw_check(mvm->hw, RX_INCLUDES_FCS)) {
+		u32 pkt_flags = le32_to_cpu(pkt->len_n_flags);
+
+		/*
+		 * If RADA was not enabled then decryption was not performed so
+		 * the MIC cannot be removed.
+		 */
+		if (!(pkt_flags & FH_RSCSR_RADA_EN)) {
+			if (WARN_ON(crypt_len > mic_crc_len))
+				return -EINVAL;
+
+			mic_crc_len -= crypt_len;
+		}
+
+		if (WARN_ON(mic_crc_len > len))
+			return -EINVAL;
+
+		len -= mic_crc_len;
+	}
+
 	/* If frame is small enough to fit in skb->head, pull it completely.
 	 * If not, only pull ieee80211_hdr (including crypto if present, and
 	 * an additional 8 bytes for SNAP/ethertype, see below) so that
-- 
2.34.1

[PATCH AUTOSEL 5.10 083/116] iwlwifi: pcie: make sure prph_info is set when treating wakeup IRQ

[Sasha Levin]

From: Luca Coelho <luciano.coelho@intel.com>

[ Upstream commit 459fc0f2c6b0f6e280bfa0f230c100c9dfe3a199 ]

In some rare cases when the HW is in a bad state, we may get this
interrupt when prph_info is not set yet.  Then we will try to
dereference it to check the sleep_notif element, which will cause an
oops.

Fix that by ignoring the interrupt if prph_info is not set yet.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.0537aa562313.I183bb336345b9b3da196ba9e596a6f189fbcbd09@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index 2c13fa8f28200..6aedf5762571d 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -2260,7 +2260,12 @@ irqreturn_t iwl_pcie_irq_msix_handler(int irq, void *dev_id)
 		}
 	}
 
-	if (inta_hw & MSIX_HW_INT_CAUSES_REG_WAKEUP) {
+	/*
+	 * In some rare cases when the HW is in a bad state, we may
+	 * get this interrupt too early, when prph_info is still NULL.
+	 * So make sure that it's not NULL to prevent crashing.
+	 */
+	if (inta_hw & MSIX_HW_INT_CAUSES_REG_WAKEUP && trans_pcie->prph_info) {
 		u32 sleep_notif =
 			le32_to_cpu(trans_pcie->prph_info->sleep_notif);
 		if (sleep_notif == IWL_D3_SLEEP_STATUS_SUSPEND ||
-- 
2.34.1

[PATCH AUTOSEL 5.10 084/116] um: registers: Rename function names to avoid conflicts and build problems

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 077b7320942b64b0da182aefd83c374462a65535 ]

The function names init_registers() and restore_registers() are used
in several net/ethernet/ and gpu/drm/ drivers for other purposes (not
calls to UML functions), so rename them.

This fixes multiple build errors.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: linux-um@lists.infradead.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/um/include/shared/registers.h | 4 ++--
 arch/um/os-Linux/registers.c       | 4 ++--
 arch/um/os-Linux/start_up.c        | 2 +-
 arch/x86/um/syscalls_64.c          | 3 ++-
 4 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/um/include/shared/registers.h b/arch/um/include/shared/registers.h
index 0c50fa6e8a55b..fbb709a222839 100644
--- a/arch/um/include/shared/registers.h
+++ b/arch/um/include/shared/registers.h
@@ -16,8 +16,8 @@ extern int restore_fp_registers(int pid, unsigned long *fp_regs);
 extern int save_fpx_registers(int pid, unsigned long *fp_regs);
 extern int restore_fpx_registers(int pid, unsigned long *fp_regs);
 extern int save_registers(int pid, struct uml_pt_regs *regs);
-extern int restore_registers(int pid, struct uml_pt_regs *regs);
-extern int init_registers(int pid);
+extern int restore_pid_registers(int pid, struct uml_pt_regs *regs);
+extern int init_pid_registers(int pid);
 extern void get_safe_registers(unsigned long *regs, unsigned long *fp_regs);
 extern unsigned long get_thread_reg(int reg, jmp_buf *buf);
 extern int get_fp_registers(int pid, unsigned long *regs);
diff --git a/arch/um/os-Linux/registers.c b/arch/um/os-Linux/registers.c
index 2d9270508e156..b123955be7acc 100644
--- a/arch/um/os-Linux/registers.c
+++ b/arch/um/os-Linux/registers.c
@@ -21,7 +21,7 @@ int save_registers(int pid, struct uml_pt_regs *regs)
 	return 0;
 }
 
-int restore_registers(int pid, struct uml_pt_regs *regs)
+int restore_pid_registers(int pid, struct uml_pt_regs *regs)
 {
 	int err;
 
@@ -36,7 +36,7 @@ int restore_registers(int pid, struct uml_pt_regs *regs)
 static unsigned long exec_regs[MAX_REG_NR];
 static unsigned long exec_fp_regs[FP_SIZE];
 
-int init_registers(int pid)
+int init_pid_registers(int pid)
 {
 	int err;
 
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index f79dc338279e6..b28373a2b8d2d 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -336,7 +336,7 @@ void __init os_early_checks(void)
 	check_tmpexec();
 
 	pid = start_ptraced_child();
-	if (init_registers(pid))
+	if (init_pid_registers(pid))
 		fatal("Failed to initialize default registers");
 	stop_ptraced_child(pid, 1, 1);
 }
diff --git a/arch/x86/um/syscalls_64.c b/arch/x86/um/syscalls_64.c
index 58f51667e2e4b..8249685b40960 100644
--- a/arch/x86/um/syscalls_64.c
+++ b/arch/x86/um/syscalls_64.c
@@ -11,6 +11,7 @@
 #include <linux/uaccess.h>
 #include <asm/prctl.h> /* XXX This should get the constants from libc */
 #include <os.h>
+#include <registers.h>
 
 long arch_prctl(struct task_struct *task, int option,
 		unsigned long __user *arg2)
@@ -35,7 +36,7 @@ long arch_prctl(struct task_struct *task, int option,
 	switch (option) {
 	case ARCH_SET_FS:
 	case ARCH_SET_GS:
-		ret = restore_registers(pid, &current->thread.regs.regs);
+		ret = restore_pid_registers(pid, &current->thread.regs.regs);
 		if (ret)
 			return ret;
 		break;
-- 
2.34.1

[PATCH AUTOSEL 5.10 085/116] ath11k: Fix napi related hang

[Sasha Levin]

From: Ben Greear <greearb@candelatech.com>

[ Upstream commit d943fdad7589653065be0e20aadc6dff37725ed4 ]

Similar to the same bug in ath10k, a napi disable w/out it being enabled
will hang forever.  I believe I saw this while trying rmmod after driver
had some failure on startup.  Fix it by keeping state on whether napi is
enabled or not.

And, remove un-used napi pointer in ath11k driver base struct.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20200903195254.29379-1-greearb@candelatech.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/ahb.c  | 12 +++++++++---
 drivers/net/wireless/ath/ath11k/core.h |  2 +-
 drivers/net/wireless/ath/ath11k/pci.c  | 12 +++++++++---
 3 files changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c
index 430723c64adce..a17d10f5e355a 100644
--- a/drivers/net/wireless/ath/ath11k/ahb.c
+++ b/drivers/net/wireless/ath/ath11k/ahb.c
@@ -175,8 +175,11 @@ static void __ath11k_ahb_ext_irq_disable(struct ath11k_base *ab)
 
 		ath11k_ahb_ext_grp_disable(irq_grp);
 
-		napi_synchronize(&irq_grp->napi);
-		napi_disable(&irq_grp->napi);
+		if (irq_grp->napi_enabled) {
+			napi_synchronize(&irq_grp->napi);
+			napi_disable(&irq_grp->napi);
+			irq_grp->napi_enabled = false;
+		}
 	}
 }
 
@@ -300,7 +303,10 @@ static void ath11k_ahb_ext_irq_enable(struct ath11k_base *ab)
 	for (i = 0; i < ATH11K_EXT_IRQ_GRP_NUM_MAX; i++) {
 		struct ath11k_ext_irq_grp *irq_grp = &ab->ext_irq_grp[i];
 
-		napi_enable(&irq_grp->napi);
+		if (!irq_grp->napi_enabled) {
+			napi_enable(&irq_grp->napi);
+			irq_grp->napi_enabled = true;
+		}
 		ath11k_ahb_ext_grp_enable(irq_grp);
 	}
 }
diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h
index c8e36251068c9..d2f2898d17b49 100644
--- a/drivers/net/wireless/ath/ath11k/core.h
+++ b/drivers/net/wireless/ath/ath11k/core.h
@@ -124,6 +124,7 @@ struct ath11k_ext_irq_grp {
 	u32 num_irq;
 	u32 grp_id;
 	u64 timestamp;
+	bool napi_enabled;
 	struct napi_struct napi;
 	struct net_device napi_ndev;
 };
@@ -687,7 +688,6 @@ struct ath11k_base {
 	u32 wlan_init_status;
 	int irq_num[ATH11K_IRQ_NUM_MAX];
 	struct ath11k_ext_irq_grp ext_irq_grp[ATH11K_EXT_IRQ_GRP_NUM_MAX];
-	struct napi_struct *napi;
 	struct ath11k_targ_cap target_caps;
 	u32 ext_service_bitmap[WMI_SERVICE_EXT_BM_SIZE];
 	bool pdevs_macaddr_valid;
diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c
index d7eb6b7160bb4..105e344240c10 100644
--- a/drivers/net/wireless/ath/ath11k/pci.c
+++ b/drivers/net/wireless/ath/ath11k/pci.c
@@ -416,8 +416,11 @@ static void __ath11k_pci_ext_irq_disable(struct ath11k_base *sc)
 
 		ath11k_pci_ext_grp_disable(irq_grp);
 
-		napi_synchronize(&irq_grp->napi);
-		napi_disable(&irq_grp->napi);
+		if (irq_grp->napi_enabled) {
+			napi_synchronize(&irq_grp->napi);
+			napi_disable(&irq_grp->napi);
+			irq_grp->napi_enabled = false;
+		}
 	}
 }
 
@@ -436,7 +439,10 @@ static void ath11k_pci_ext_irq_enable(struct ath11k_base *ab)
 	for (i = 0; i < ATH11K_EXT_IRQ_GRP_NUM_MAX; i++) {
 		struct ath11k_ext_irq_grp *irq_grp = &ab->ext_irq_grp[i];
 
-		napi_enable(&irq_grp->napi);
+		if (!irq_grp->napi_enabled) {
+			napi_enable(&irq_grp->napi);
+			irq_grp->napi_enabled = true;
+		}
 		ath11k_pci_ext_grp_enable(irq_grp);
 	}
 }
-- 
2.34.1

[PATCH AUTOSEL 5.10 086/116] Bluetooth: vhci: Set HCI_QUIRK_VALID_LE_STATES

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit cfb4c313be670fd4bd09650216620fa4514cdb93 ]

This set HCI_QUIRK_VALID_LE_STATES quirk which is required for the likes
of experimental LE simultaneous roles.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/hci_vhci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index 8ab26dec5f6e8..8469f9876dd26 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -121,6 +121,8 @@ static int __vhci_create_device(struct vhci_data *data, __u8 opcode)
 	if (opcode & 0x80)
 		set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
 
+	set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+
 	if (hci_register_dev(hdev) < 0) {
 		BT_ERR("Can't register HCI device");
 		hci_free_dev(hdev);
-- 
2.34.1

[PATCH AUTOSEL 5.10 087/116] xfrm: rate limit SA mapping change message to user space

[Sasha Levin]

From: Antony Antony <antony.antony@secunet.com>

[ Upstream commit 4e484b3e969b52effd95c17f7a86f39208b2ccf4 ]

Kernel generates mapping change message, XFRM_MSG_MAPPING,
when a source port chage is detected on a input state with UDP
encapsulation set.  Kernel generates a message for each IPsec packet
with new source port.  For a high speed flow per packet mapping change
message can be excessive, and can overload the user space listener.

Introduce rate limiting for XFRM_MSG_MAPPING message to the user space.

The rate limiting is configurable via netlink, when adding a new SA or
updating it. Use the new attribute XFRMA_MTIMER_THRESH in seconds.

v1->v2 change:
	update xfrm_sa_len()

v2->v3 changes:
	use u32 insted unsigned long to reduce size of struct xfrm_state
	fix xfrm_ompat size Reported-by: kernel test robot <lkp@intel.com>
	accept XFRM_MSG_MAPPING only when XFRMA_ENCAP is present

Co-developed-by: Thomas Egerer <thomas.egerer@secunet.com>
Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/xfrm.h        |  5 +++++
 include/uapi/linux/xfrm.h |  1 +
 net/xfrm/xfrm_compat.c    |  6 ++++--
 net/xfrm/xfrm_state.c     | 23 ++++++++++++++++++++++-
 net/xfrm/xfrm_user.c      | 18 +++++++++++++++++-
 5 files changed, 49 insertions(+), 4 deletions(-)

diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 6232a5f048bde..337d29875e518 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -193,6 +193,11 @@ struct xfrm_state {
 	struct xfrm_algo_aead	*aead;
 	const char		*geniv;
 
+	/* mapping change rate limiting */
+	__be16 new_mapping_sport;
+	u32 new_mapping;	/* seconds */
+	u32 mapping_maxage;	/* seconds for input SA */
+
 	/* Data for encapsulator */
 	struct xfrm_encap_tmpl	*encap;
 	struct sock __rcu	*encap_sk;
diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h
index ffc6a5391bb7b..2290c98b47cf8 100644
--- a/include/uapi/linux/xfrm.h
+++ b/include/uapi/linux/xfrm.h
@@ -308,6 +308,7 @@ enum xfrm_attr_type_t {
 	XFRMA_SET_MARK,		/* __u32 */
 	XFRMA_SET_MARK_MASK,	/* __u32 */
 	XFRMA_IF_ID,		/* __u32 */
+	XFRMA_MTIMER_THRESH,	/* __u32 in seconds for input SA */
 	__XFRMA_MAX
 
 #define XFRMA_OUTPUT_MARK XFRMA_SET_MARK	/* Compatibility */
diff --git a/net/xfrm/xfrm_compat.c b/net/xfrm/xfrm_compat.c
index 2bf2693901631..a0f62fa02e06e 100644
--- a/net/xfrm/xfrm_compat.c
+++ b/net/xfrm/xfrm_compat.c
@@ -127,6 +127,7 @@ static const struct nla_policy compat_policy[XFRMA_MAX+1] = {
 	[XFRMA_SET_MARK]	= { .type = NLA_U32 },
 	[XFRMA_SET_MARK_MASK]	= { .type = NLA_U32 },
 	[XFRMA_IF_ID]		= { .type = NLA_U32 },
+	[XFRMA_MTIMER_THRESH]	= { .type = NLA_U32 },
 };
 
 static struct nlmsghdr *xfrm_nlmsg_put_compat(struct sk_buff *skb,
@@ -274,9 +275,10 @@ static int xfrm_xlate64_attr(struct sk_buff *dst, const struct nlattr *src)
 	case XFRMA_SET_MARK:
 	case XFRMA_SET_MARK_MASK:
 	case XFRMA_IF_ID:
+	case XFRMA_MTIMER_THRESH:
 		return xfrm_nla_cpy(dst, src, nla_len(src));
 	default:
-		BUILD_BUG_ON(XFRMA_MAX != XFRMA_IF_ID);
+		BUILD_BUG_ON(XFRMA_MAX != XFRMA_MTIMER_THRESH);
 		pr_warn_once("unsupported nla_type %d\n", src->nla_type);
 		return -EOPNOTSUPP;
 	}
@@ -431,7 +433,7 @@ static int xfrm_xlate32_attr(void *dst, const struct nlattr *nla,
 	int err;
 
 	if (type > XFRMA_MAX) {
-		BUILD_BUG_ON(XFRMA_MAX != XFRMA_IF_ID);
+		BUILD_BUG_ON(XFRMA_MAX != XFRMA_MTIMER_THRESH);
 		NL_SET_ERR_MSG(extack, "Bad attribute");
 		return -EOPNOTSUPP;
 	}
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index c158e70e8ae10..65e2805fa113a 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -1557,6 +1557,9 @@ static struct xfrm_state *xfrm_state_clone(struct xfrm_state *orig,
 	x->km.seq = orig->km.seq;
 	x->replay = orig->replay;
 	x->preplay = orig->preplay;
+	x->mapping_maxage = orig->mapping_maxage;
+	x->new_mapping = 0;
+	x->new_mapping_sport = 0;
 
 	return x;
 
@@ -2208,7 +2211,7 @@ int km_query(struct xfrm_state *x, struct xfrm_tmpl *t, struct xfrm_policy *pol)
 }
 EXPORT_SYMBOL(km_query);
 
-int km_new_mapping(struct xfrm_state *x, xfrm_address_t *ipaddr, __be16 sport)
+static int __km_new_mapping(struct xfrm_state *x, xfrm_address_t *ipaddr, __be16 sport)
 {
 	int err = -EINVAL;
 	struct xfrm_mgr *km;
@@ -2223,6 +2226,24 @@ int km_new_mapping(struct xfrm_state *x, xfrm_address_t *ipaddr, __be16 sport)
 	rcu_read_unlock();
 	return err;
 }
+
+int km_new_mapping(struct xfrm_state *x, xfrm_address_t *ipaddr, __be16 sport)
+{
+	int ret = 0;
+
+	if (x->mapping_maxage) {
+		if ((jiffies / HZ - x->new_mapping) > x->mapping_maxage ||
+		    x->new_mapping_sport != sport) {
+			x->new_mapping_sport = sport;
+			x->new_mapping = jiffies / HZ;
+			ret = __km_new_mapping(x, ipaddr, sport);
+		}
+	} else {
+		ret = __km_new_mapping(x, ipaddr, sport);
+	}
+
+	return ret;
+}
 EXPORT_SYMBOL(km_new_mapping);
 
 void km_policy_expired(struct xfrm_policy *pol, int dir, int hard, u32 portid)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 6f97665b632ed..c71a4c1269e48 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -282,6 +282,10 @@ static int verify_newsa_info(struct xfrm_usersa_info *p,
 
 	err = 0;
 
+	if (attrs[XFRMA_MTIMER_THRESH])
+		if (!attrs[XFRMA_ENCAP])
+			err = -EINVAL;
+
 out:
 	return err;
 }
@@ -521,6 +525,7 @@ static void xfrm_update_ae_params(struct xfrm_state *x, struct nlattr **attrs,
 	struct nlattr *lt = attrs[XFRMA_LTIME_VAL];
 	struct nlattr *et = attrs[XFRMA_ETIMER_THRESH];
 	struct nlattr *rt = attrs[XFRMA_REPLAY_THRESH];
+	struct nlattr *mt = attrs[XFRMA_MTIMER_THRESH];
 
 	if (re) {
 		struct xfrm_replay_state_esn *replay_esn;
@@ -552,6 +557,9 @@ static void xfrm_update_ae_params(struct xfrm_state *x, struct nlattr **attrs,
 
 	if (rt)
 		x->replay_maxdiff = nla_get_u32(rt);
+
+	if (mt)
+		x->mapping_maxage = nla_get_u32(mt);
 }
 
 static void xfrm_smark_init(struct nlattr **attrs, struct xfrm_mark *m)
@@ -964,8 +972,13 @@ static int copy_to_user_state_extra(struct xfrm_state *x,
 		if (ret)
 			goto out;
 	}
-	if (x->security)
+	if (x->security) {
 		ret = copy_sec_ctx(x->security, skb);
+		if (ret)
+			goto out;
+	}
+	if (x->mapping_maxage)
+		ret = nla_put_u32(skb, XFRMA_MTIMER_THRESH, x->mapping_maxage);
 out:
 	return ret;
 }
@@ -2909,6 +2922,9 @@ static inline unsigned int xfrm_sa_len(struct xfrm_state *x)
 	/* Must count x->lastused as it may become non-zero behind our back. */
 	l += nla_total_size_64bit(sizeof(u64));
 
+	if (x->mapping_maxage)
+		l += nla_total_size(sizeof(x->mapping_maxage));
+
 	return l;
 }
 
-- 
2.34.1

[PATCH AUTOSEL 5.10 088/116] drm/etnaviv: consider completed fence seqno in hang check

[Sasha Levin]

From: Lucas Stach <l.stach@pengutronix.de>

[ Upstream commit cdd156955f946beaa5f3a00d8ccf90e5a197becc ]

Some GPU heavy test programs manage to trigger the hangcheck quite often.
If there are no other GPU users in the system and the test program
exhibits a very regular structure in the commandstreams that are being
submitted, we can end up with two distinct submits managing to trigger
the hangcheck with the FE in a very similar address range. This leads
the hangcheck to believe that the GPU is stuck, while in reality the GPU
is already busy working on a different job. To avoid those spurious
GPU resets, also remember and consider the last completed fence seqno
in the hang check.

Reported-by: Joerg Albert <joerg.albert@iav.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/etnaviv/etnaviv_gpu.h   | 1 +
 drivers/gpu/drm/etnaviv/etnaviv_sched.c | 4 +++-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.h b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
index 1c75c8ed5bcea..85eddd492774d 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
@@ -130,6 +130,7 @@ struct etnaviv_gpu {
 
 	/* hang detection */
 	u32 hangcheck_dma_addr;
+	u32 hangcheck_fence;
 
 	void __iomem *mmio;
 	int irq;
diff --git a/drivers/gpu/drm/etnaviv/etnaviv_sched.c b/drivers/gpu/drm/etnaviv/etnaviv_sched.c
index cd46c882269cc..026b6c0731198 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_sched.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_sched.c
@@ -106,8 +106,10 @@ static void etnaviv_sched_timedout_job(struct drm_sched_job *sched_job)
 	 */
 	dma_addr = gpu_read(gpu, VIVS_FE_DMA_ADDRESS);
 	change = dma_addr - gpu->hangcheck_dma_addr;
-	if (change < 0 || change > 16) {
+	if (gpu->completed_fence != gpu->hangcheck_fence ||
+	    change < 0 || change > 16) {
 		gpu->hangcheck_dma_addr = dma_addr;
+		gpu->hangcheck_fence = gpu->completed_fence;
 		goto out_no_timeout;
 	}
 
-- 
2.34.1

[PATCH AUTOSEL 5.10 089/116] jffs2: GC deadlock reading a page that is used in jffs2_write_begin()

[Sasha Levin]

From: Kyeong Yoo <kyeong.yoo@alliedtelesis.co.nz>

[ Upstream commit aa39cc675799bc92da153af9a13d6f969c348e82 ]

GC task can deadlock in read_cache_page() because it may attempt
to release a page that is actually allocated by another task in
jffs2_write_begin().
The reason is that in jffs2_write_begin() there is a small window
a cache page is allocated for use but not set Uptodate yet.

This ends up with a deadlock between two tasks:
1) A task (e.g. file copy)
   - jffs2_write_begin() locks a cache page
   - jffs2_write_end() tries to lock "alloc_sem" from
	 jffs2_reserve_space() <-- STUCK
2) GC task (jffs2_gcd_mtd3)
   - jffs2_garbage_collect_pass() locks "alloc_sem"
   - try to lock the same cache page in read_cache_page() <-- STUCK

So to avoid this deadlock, hold "alloc_sem" in jffs2_write_begin()
while reading data in a cache page.

Signed-off-by: Kyeong Yoo <kyeong.yoo@alliedtelesis.co.nz>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jffs2/file.c | 40 +++++++++++++++++++++++++---------------
 1 file changed, 25 insertions(+), 15 deletions(-)

diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c
index 4fc8cd698d1a4..bd7d58d27bfc6 100644
--- a/fs/jffs2/file.c
+++ b/fs/jffs2/file.c
@@ -136,20 +136,15 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
 	struct page *pg;
 	struct inode *inode = mapping->host;
 	struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
+	struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
 	pgoff_t index = pos >> PAGE_SHIFT;
 	uint32_t pageofs = index << PAGE_SHIFT;
 	int ret = 0;
 
-	pg = grab_cache_page_write_begin(mapping, index, flags);
-	if (!pg)
-		return -ENOMEM;
-	*pagep = pg;
-
 	jffs2_dbg(1, "%s()\n", __func__);
 
 	if (pageofs > inode->i_size) {
 		/* Make new hole frag from old EOF to new page */
-		struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
 		struct jffs2_raw_inode ri;
 		struct jffs2_full_dnode *fn;
 		uint32_t alloc_len;
@@ -160,7 +155,7 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
 		ret = jffs2_reserve_space(c, sizeof(ri), &alloc_len,
 					  ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE);
 		if (ret)
-			goto out_page;
+			goto out_err;
 
 		mutex_lock(&f->sem);
 		memset(&ri, 0, sizeof(ri));
@@ -190,7 +185,7 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
 			ret = PTR_ERR(fn);
 			jffs2_complete_reservation(c);
 			mutex_unlock(&f->sem);
-			goto out_page;
+			goto out_err;
 		}
 		ret = jffs2_add_full_dnode_to_inode(c, f, fn);
 		if (f->metadata) {
@@ -205,13 +200,26 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
 			jffs2_free_full_dnode(fn);
 			jffs2_complete_reservation(c);
 			mutex_unlock(&f->sem);
-			goto out_page;
+			goto out_err;
 		}
 		jffs2_complete_reservation(c);
 		inode->i_size = pageofs;
 		mutex_unlock(&f->sem);
 	}
 
+	/*
+	 * While getting a page and reading data in, lock c->alloc_sem until
+	 * the page is Uptodate. Otherwise GC task may attempt to read the same
+	 * page in read_cache_page(), which causes a deadlock.
+	 */
+	mutex_lock(&c->alloc_sem);
+	pg = grab_cache_page_write_begin(mapping, index, flags);
+	if (!pg) {
+		ret = -ENOMEM;
+		goto release_sem;
+	}
+	*pagep = pg;
+
 	/*
 	 * Read in the page if it wasn't already present. Cannot optimize away
 	 * the whole page write case until jffs2_write_end can handle the
@@ -221,15 +229,17 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
 		mutex_lock(&f->sem);
 		ret = jffs2_do_readpage_nolock(inode, pg);
 		mutex_unlock(&f->sem);
-		if (ret)
-			goto out_page;
+		if (ret) {
+			unlock_page(pg);
+			put_page(pg);
+			goto release_sem;
+		}
 	}
 	jffs2_dbg(1, "end write_begin(). pg->flags %lx\n", pg->flags);
-	return ret;
 
-out_page:
-	unlock_page(pg);
-	put_page(pg);
+release_sem:
+	mutex_unlock(&c->alloc_sem);
+out_err:
 	return ret;
 }
 
-- 
2.34.1

[PATCH AUTOSEL 5.10 090/116] ACPICA: actypes.h: Expand the ACPI_ACCESS_ definitions

[Sasha Levin]

From: Mark Langsdorf <mlangsdo@redhat.com>

[ Upstream commit f81bdeaf816142e0729eea0cc84c395ec9673151 ]

ACPICA commit bc02c76d518135531483dfc276ed28b7ee632ce1

The current ACPI_ACCESS_*_WIDTH defines do not provide a way to
test that size is small enough to not cause an overflow when
applied to a 32-bit integer.

Rather than adding more magic numbers, add ACPI_ACCESS_*_SHIFT,
ACPI_ACCESS_*_MAX, and ACPI_ACCESS_*_DEFAULT #defines and
redefine ACPI_ACCESS_*_WIDTH in terms of the new #defines.

This was inititally reported on Linux where a size of 102 in
ACPI_ACCESS_BIT_WIDTH caused an overflow error in the SPCR
initialization code.

Link: https://github.com/acpica/acpica/commit/bc02c76d
Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/acpi/actypes.h | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 647cb11d0a0a3..7334037624c5c 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -536,8 +536,14 @@ typedef u64 acpi_integer;
  * Can be used with access_width of struct acpi_generic_address and access_size of
  * struct acpi_resource_generic_register.
  */
-#define ACPI_ACCESS_BIT_WIDTH(size)     (1 << ((size) + 2))
-#define ACPI_ACCESS_BYTE_WIDTH(size)    (1 << ((size) - 1))
+#define ACPI_ACCESS_BIT_SHIFT		2
+#define ACPI_ACCESS_BYTE_SHIFT		-1
+#define ACPI_ACCESS_BIT_MAX		(31 - ACPI_ACCESS_BIT_SHIFT)
+#define ACPI_ACCESS_BYTE_MAX		(31 - ACPI_ACCESS_BYTE_SHIFT)
+#define ACPI_ACCESS_BIT_DEFAULT		(8 - ACPI_ACCESS_BIT_SHIFT)
+#define ACPI_ACCESS_BYTE_DEFAULT	(8 - ACPI_ACCESS_BYTE_SHIFT)
+#define ACPI_ACCESS_BIT_WIDTH(size)	(1 << ((size) + ACPI_ACCESS_BIT_SHIFT))
+#define ACPI_ACCESS_BYTE_WIDTH(size)	(1 << ((size) + ACPI_ACCESS_BYTE_SHIFT))
 
 /*******************************************************************************
  *
-- 
2.34.1

[PATCH AUTOSEL 5.10 091/116] ACPICA: Utilities: Avoid deleting the same object twice in a row

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit 1cdfe9e346b4c5509ffe19ccde880fd259d9f7a3 ]

ACPICA commit c11af67d8f7e3d381068ce7771322f2b5324d687

If original_count is 0 in acpi_ut_update_ref_count (),
acpi_ut_delete_internal_obj () is invoked for the target object, which is
incorrect, because that object has been deleted once already and the
memory allocated to store it may have been reclaimed and allocated
for a different purpose by the host OS.  Moreover, a confusing debug
message following the "Reference Count is already zero, cannot
decrement" warning is printed in that case.

To fix this issue, make acpi_ut_update_ref_count () return after finding
that original_count is 0 and printing the above warning.

Link: https://github.com/acpica/acpica/commit/c11af67d
Link: https://github.com/acpica/acpica/pull/652
Reported-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpica/utdelete.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/acpi/acpica/utdelete.c b/drivers/acpi/acpica/utdelete.c
index 72d2c0b656339..cb1750e7a6281 100644
--- a/drivers/acpi/acpica/utdelete.c
+++ b/drivers/acpi/acpica/utdelete.c
@@ -422,6 +422,7 @@ acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action)
 			ACPI_WARNING((AE_INFO,
 				      "Obj %p, Reference Count is already zero, cannot decrement\n",
 				      object));
+			return;
 		}
 
 		ACPI_DEBUG_PRINT_RAW((ACPI_DB_ALLOCATIONS,
-- 
2.34.1

[PATCH AUTOSEL 5.10 092/116] ACPICA: Executer: Fix the REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit 24ea5f90ec9548044a6209685c5010edd66ffe8f ]

ACPICA commit d984f12041392fa4156b52e2f7e5c5e7bc38ad9e

If Operand[0] is a reference of the ACPI_REFCLASS_REFOF class,
acpi_ex_opcode_1A_0T_1R () calls acpi_ns_get_attached_object () to
obtain return_desc which may require additional resolution with
the help of acpi_ex_read_data_from_field (). If the latter fails,
the reference counter of the original return_desc is decremented
which is incorrect, because acpi_ns_get_attached_object () does not
increment the reference counter of the object returned by it.

This issue may lead to premature deletion of the attached object
while it is still attached and a use-after-free and crash in the
host OS.  For example, this may happen when on evaluation of ref_of()
a local region field where there is no registered handler for the
given Operation Region.

Fix it by making acpi_ex_opcode_1A_0T_1R () return Status right away
after a acpi_ex_read_data_from_field () failure.

Link: https://github.com/acpica/acpica/commit/d984f120
Link: https://github.com/acpica/acpica/pull/685
Reported-by: Lenny Szubowicz <lszubowi@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpica/exoparg1.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/acpica/exoparg1.c b/drivers/acpi/acpica/exoparg1.c
index a46d685a3ffcf..9d67dfd93d5b6 100644
--- a/drivers/acpi/acpica/exoparg1.c
+++ b/drivers/acpi/acpica/exoparg1.c
@@ -1007,7 +1007,8 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
 						    (walk_state, return_desc,
 						     &temp_desc);
 						if (ACPI_FAILURE(status)) {
-							goto cleanup;
+							return_ACPI_STATUS
+							    (status);
 						}
 
 						return_desc = temp_desc;
-- 
2.34.1

[PATCH AUTOSEL 5.10 093/116] ACPICA: Fix wrong interpretation of PCC address

[Sasha Levin]

From: Sudeep Holla <sudeep.holla@arm.com>

[ Upstream commit 9a3b8655db1ada31c82189ae13f40eb25da48c35 ]

ACPICA commit 41be6afacfdaec2dba3a5ed368736babc2a7aa5c

With the PCC Opregion in the firmware and we are hitting below kernel crash:

-->8
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
 Workqueue: pm pm_runtime_work
 pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : __memcpy+0x54/0x260
 lr : acpi_ex_write_data_to_field+0xb8/0x194
 Call trace:
  __memcpy+0x54/0x260
  acpi_ex_store_object_to_node+0xa4/0x1d4
  acpi_ex_store+0x44/0x164
  acpi_ex_opcode_1A_1T_1R+0x25c/0x508
  acpi_ds_exec_end_op+0x1b4/0x44c
  acpi_ps_parse_loop+0x3a8/0x614
  acpi_ps_parse_aml+0x90/0x2f4
  acpi_ps_execute_method+0x11c/0x19c
  acpi_ns_evaluate+0x1ec/0x2b0
  acpi_evaluate_object+0x170/0x2b0
  acpi_device_set_power+0x118/0x310
  acpi_dev_suspend+0xd4/0x180
  acpi_subsys_runtime_suspend+0x28/0x38
  __rpm_callback+0x74/0x328
  rpm_suspend+0x2d8/0x624
  pm_runtime_work+0xa4/0xb8
  process_one_work+0x194/0x25c
  worker_thread+0x260/0x49c
  kthread+0x14c/0x30c
  ret_from_fork+0x10/0x20
 Code: f9000006 f81f80a7 d65f03c0 361000c2 (b9400026)
 ---[ end trace 24d8a032fa77b68a ]---

The reason for the crash is that the PCC channel index passed via region.address
in acpi_ex_store_object_to_node is interpreted as the channel subtype
incorrectly.

Assuming the PCC op_region support is not used by any other type, let us
remove the subtype check as the AML has no access to the subtype information.
Once we remove it, the kernel crash disappears and correctly complains about
missing PCC Opregion handler.

ACPI Error: No handler for Region [PFRM] ((____ptrval____)) [PCC] (20210730/evregion-130)
ACPI Error: Region PCC (ID=10) has no handler (20210730/exfldio-261)
ACPI Error: Aborting method \_SB.ETH0._PS3 due to previous error (AE_NOT_EXIST) (20210730/psparse-531)

Link: https://github.com/acpica/acpica/commit/41be6afa
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpica/exfield.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c
index 3323a2ba6a313..b3230e511870a 100644
--- a/drivers/acpi/acpica/exfield.c
+++ b/drivers/acpi/acpica/exfield.c
@@ -326,12 +326,7 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc,
 		       obj_desc->field.base_byte_offset,
 		       source_desc->buffer.pointer, data_length);
 
-		if ((obj_desc->field.region_obj->region.address ==
-		     PCC_MASTER_SUBSPACE
-		     && MASTER_SUBSPACE_COMMAND(obj_desc->field.
-						base_byte_offset))
-		    || GENERIC_SUBSPACE_COMMAND(obj_desc->field.
-						base_byte_offset)) {
+		if (MASTER_SUBSPACE_COMMAND(obj_desc->field.base_byte_offset)) {
 
 			/* Perform the write */
 
-- 
2.34.1

[PATCH AUTOSEL 5.10 094/116] ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5

[Sasha Levin]

From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>

[ Upstream commit 1d4e0b3abb168b2ee1eca99c527cffa1b80b6161 ]

ACPICA commit 3dd7e1f3996456ef81bfe14cba29860e8d42949e

According to ACPI 6.4, Section 16.2, the CPU cache flushing is
required on entering to S1, S2, and S3, but the ACPICA code
flushes the CPU cache regardless of the sleep state.

Blind cache flush on entering S5 causes problems for TDX.

Flushing happens with WBINVD that is not supported in the TDX
environment.

TDX only supports S5 and adjusting ACPICA code to conform to the
spec more strictly fixes the issue.

Link: https://github.com/acpica/acpica/commit/3dd7e1f3
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpica/hwesleep.c  | 4 +++-
 drivers/acpi/acpica/hwsleep.c   | 4 +++-
 drivers/acpi/acpica/hwxfsleep.c | 2 --
 3 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c
index 4836a4b8b38b8..142a755be6881 100644
--- a/drivers/acpi/acpica/hwesleep.c
+++ b/drivers/acpi/acpica/hwesleep.c
@@ -104,7 +104,9 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state)
 
 	/* Flush caches, as per ACPI specification */
 
-	ACPI_FLUSH_CPU_CACHE();
+	if (sleep_state < ACPI_STATE_S4) {
+		ACPI_FLUSH_CPU_CACHE();
+	}
 
 	status = acpi_os_enter_sleep(sleep_state, sleep_control, 0);
 	if (status == AE_CTRL_TERMINATE) {
diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c
index fcc84d196238a..6a20bb5059c1d 100644
--- a/drivers/acpi/acpica/hwsleep.c
+++ b/drivers/acpi/acpica/hwsleep.c
@@ -110,7 +110,9 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state)
 
 	/* Flush caches, as per ACPI specification */
 
-	ACPI_FLUSH_CPU_CACHE();
+	if (sleep_state < ACPI_STATE_S4) {
+		ACPI_FLUSH_CPU_CACHE();
+	}
 
 	status = acpi_os_enter_sleep(sleep_state, pm1a_control, pm1b_control);
 	if (status == AE_CTRL_TERMINATE) {
diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c
index f1645d87864c3..3948c34d85830 100644
--- a/drivers/acpi/acpica/hwxfsleep.c
+++ b/drivers/acpi/acpica/hwxfsleep.c
@@ -162,8 +162,6 @@ acpi_status acpi_enter_sleep_state_s4bios(void)
 		return_ACPI_STATUS(status);
 	}
 
-	ACPI_FLUSH_CPU_CACHE();
-
 	status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
 				    (u32)acpi_gbl_FADT.s4_bios_request, 8);
 	if (ACPI_FAILURE(status)) {
-- 
2.34.1

[PATCH AUTOSEL 5.10 095/116] drm/amdgpu: fixup bad vram size on gmc v8

[Sasha Levin]

From: Zongmin Zhou <zhouzongmin@kylinos.cn>

[ Upstream commit 11544d77e3974924c5a9c8a8320b996a3e9b2f8b ]

Some boards(like RX550) seem to have garbage in the upper
16 bits of the vram size register.  Check for
this and clamp the size properly.  Fixes
boards reporting bogus amounts of vram.

after add this patch,the maximum GPU VRAM size is 64GB,
otherwise only 64GB vram size will be used.

Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
index 9ab65ca7df777..873bc33912e23 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
@@ -524,10 +524,10 @@ static void gmc_v8_0_mc_program(struct amdgpu_device *adev)
 static int gmc_v8_0_mc_init(struct amdgpu_device *adev)
 {
 	int r;
+	u32 tmp;
 
 	adev->gmc.vram_width = amdgpu_atombios_get_vram_width(adev);
 	if (!adev->gmc.vram_width) {
-		u32 tmp;
 		int chansize, numchan;
 
 		/* Get VRAM informations */
@@ -571,8 +571,15 @@ static int gmc_v8_0_mc_init(struct amdgpu_device *adev)
 		adev->gmc.vram_width = numchan * chansize;
 	}
 	/* size in MB on si */
-	adev->gmc.mc_vram_size = RREG32(mmCONFIG_MEMSIZE) * 1024ULL * 1024ULL;
-	adev->gmc.real_vram_size = RREG32(mmCONFIG_MEMSIZE) * 1024ULL * 1024ULL;
+	tmp = RREG32(mmCONFIG_MEMSIZE);
+	/* some boards may have garbage in the upper 16 bits */
+	if (tmp & 0xffff0000) {
+		DRM_INFO("Probable bad vram size: 0x%08x\n", tmp);
+		if (tmp & 0xffff)
+			tmp &= 0xffff;
+	}
+	adev->gmc.mc_vram_size = tmp * 1024ULL * 1024ULL;
+	adev->gmc.real_vram_size = adev->gmc.mc_vram_size;
 
 	if (!(adev->flags & AMD_IS_APU)) {
 		r = amdgpu_device_resize_fb_bar(adev);
-- 
2.34.1

[PATCH AUTOSEL 5.10 096/116] mfd: intel_soc_pmic: Use CPU-id check instead of _HRV check to differentiate variants

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 5b78223f55a0f516a1639dbe11cd4324d4aaee20 ]

The Intel Crystal Cove PMIC has 2 different variants, one for use with
Bay Trail (BYT) SoCs and one for use with Cherry Trail (CHT) SoCs.

So far we have been using an ACPI _HRV check to differentiate between
the 2, but at least on the Microsoft Surface 3, which is a CHT device,
the wrong _HRV value is reported by ACPI.

So instead switch to a CPU-ID check which prevents us from relying on
the possibly wrong ACPI _HRV value.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reported-by: Tsuchiya Yuto <kitakar@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211206174806.197772-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/intel_soc_pmic_core.c | 28 +++-------------------------
 1 file changed, 3 insertions(+), 25 deletions(-)

diff --git a/drivers/mfd/intel_soc_pmic_core.c b/drivers/mfd/intel_soc_pmic_core.c
index ddd64f9e3341e..47cb7f00dfcfc 100644
--- a/drivers/mfd/intel_soc_pmic_core.c
+++ b/drivers/mfd/intel_soc_pmic_core.c
@@ -14,15 +14,12 @@
 #include <linux/module.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/intel_soc_pmic.h>
+#include <linux/platform_data/x86/soc.h>
 #include <linux/pwm.h>
 #include <linux/regmap.h>
 
 #include "intel_soc_pmic_core.h"
 
-/* Crystal Cove PMIC shares same ACPI ID between different platforms */
-#define BYT_CRC_HRV		2
-#define CHT_CRC_HRV		3
-
 /* PWM consumed by the Intel GFX */
 static struct pwm_lookup crc_pwm_lookup[] = {
 	PWM_LOOKUP("crystal_cove_pwm", 0, "0000:00:02.0", "pwm_pmic_backlight", 0, PWM_POLARITY_NORMAL),
@@ -34,31 +31,12 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
 	struct device *dev = &i2c->dev;
 	struct intel_soc_pmic_config *config;
 	struct intel_soc_pmic *pmic;
-	unsigned long long hrv;
-	acpi_status status;
 	int ret;
 
-	/*
-	 * There are 2 different Crystal Cove PMICs a Bay Trail and Cherry
-	 * Trail version, use _HRV to differentiate between the 2.
-	 */
-	status = acpi_evaluate_integer(ACPI_HANDLE(dev), "_HRV", NULL, &hrv);
-	if (ACPI_FAILURE(status)) {
-		dev_err(dev, "Failed to get PMIC hardware revision\n");
-		return -ENODEV;
-	}
-
-	switch (hrv) {
-	case BYT_CRC_HRV:
+	if (soc_intel_is_byt())
 		config = &intel_soc_pmic_config_byt_crc;
-		break;
-	case CHT_CRC_HRV:
+	else
 		config = &intel_soc_pmic_config_cht_crc;
-		break;
-	default:
-		dev_warn(dev, "Unknown hardware rev %llu, assuming BYT\n", hrv);
-		config = &intel_soc_pmic_config_byt_crc;
-	}
 
 	pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
 	if (!pmic)
-- 
2.34.1

[PATCH AUTOSEL 5.10 097/116] amdgpu/pm: Make sysfs pm attributes as read-only for VFs

[Sasha Levin]

From: Marina Nikolic <Marina.Nikolic@amd.com>

[ Upstream commit 11c9cc95f818f0f187e9b579a7f136f532b42445 ]

== Description ==
Setting values of pm attributes through sysfs
should not be allowed in SRIOV mode.
These calls will not be processed by FW anyway,
but error handling on sysfs level should be improved.

== Changes ==
This patch prohibits performing of all set commands
in SRIOV mode on sysfs level.
It offers better error handling as calls that are
not allowed will not be propagated further.

== Test ==
Writing to any sysfs file in passthrough mode will succeed.
Writing to any sysfs file in ONEVF mode will yield error:
"calling process does not have sufficient permission to execute a command".

Signed-off-by: Marina Nikolic <Marina.Nikolic@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/pm/amdgpu_pm.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/amd/pm/amdgpu_pm.c b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
index 9f383b9041d28..49109614510b8 100644
--- a/drivers/gpu/drm/amd/pm/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
@@ -2098,6 +2098,12 @@ static int default_attr_update(struct amdgpu_device *adev, struct amdgpu_device_
 		}
 	}
 
+	/* setting should not be allowed from VF */
+	if (amdgpu_sriov_vf(adev)) {
+		dev_attr->attr.mode &= ~S_IWUGO;
+		dev_attr->store = NULL;
+	}
+
 #undef DEVICE_ATTR_IS
 
 	return 0;
-- 
2.34.1

[PATCH AUTOSEL 5.10 098/116] ACPI: battery: Add the ThinkPad "Not Charging" quirk

[Sasha Levin]

From: Thomas Weißschuh <linux@weissschuh.net>

[ Upstream commit e96c1197aca628f7d2480a1cc3214912b40b3414 ]

The EC/ACPI firmware on Lenovo ThinkPads used to report a status
of "Unknown" when the battery is between the charge start and
charge stop thresholds. On Windows, it reports "Not Charging"
so the quirk has been added to also report correctly.

Now the "status" attribute returns "Not Charging" when the
battery on ThinkPads is not physicaly charging.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/battery.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index e04352c1dc2ce..2376f57b3617a 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -59,6 +59,7 @@ static int battery_bix_broken_package;
 static int battery_notification_delay_ms;
 static int battery_ac_is_broken;
 static int battery_check_pmic = 1;
+static int battery_quirk_notcharging;
 static unsigned int cache_time = 1000;
 module_param(cache_time, uint, 0644);
 MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
@@ -222,6 +223,8 @@ static int acpi_battery_get_property(struct power_supply *psy,
 			val->intval = POWER_SUPPLY_STATUS_CHARGING;
 		else if (acpi_battery_is_charged(battery))
 			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else if (battery_quirk_notcharging)
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
 		else
 			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
 		break;
@@ -1105,6 +1108,12 @@ battery_do_not_check_pmic_quirk(const struct dmi_system_id *d)
 	return 0;
 }
 
+static int __init battery_quirk_not_charging(const struct dmi_system_id *d)
+{
+	battery_quirk_notcharging = 1;
+	return 0;
+}
+
 static const struct dmi_system_id bat_dmi_table[] __initconst = {
 	{
 		/* NEC LZ750/LS */
@@ -1149,6 +1158,19 @@ static const struct dmi_system_id bat_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo MIIX 320-10ICR"),
 		},
 	},
+	{
+		/*
+		 * On Lenovo ThinkPads the BIOS specification defines
+		 * a state when the bits for charging and discharging
+		 * are both set to 0. That state is "Not Charging".
+		 */
+		.callback = battery_quirk_not_charging,
+		.ident = "Lenovo ThinkPad",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad"),
+		},
+	},
 	{},
 };
 
-- 
2.34.1

[PATCH AUTOSEL 5.10 099/116] btrfs: remove BUG_ON() in find_parent_nodes()

[Sasha Levin]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit fcba0120edf88328524a4878d1d6f4ad39f2ec81 ]

We search for an extent entry with .offset = -1, which shouldn't be a
thing, but corruption happens.  Add an ASSERT() for the developers,
return -EUCLEAN for mortals.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/backref.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index 6e447bdaf9ec8..8b471579e26e1 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -1213,7 +1213,12 @@ static int find_parent_nodes(struct btrfs_trans_handle *trans,
 	ret = btrfs_search_slot(trans, fs_info->extent_root, &key, path, 0, 0);
 	if (ret < 0)
 		goto out;
-	BUG_ON(ret == 0);
+	if (ret == 0) {
+		/* This shouldn't happen, indicates a bug or fs corruption. */
+		ASSERT(ret != 0);
+		ret = -EUCLEAN;
+		goto out;
+	}
 
 #ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS
 	if (trans && likely(trans->type != __TRANS_DUMMY) &&
-- 
2.34.1

[PATCH AUTOSEL 5.10 100/116] btrfs: remove BUG_ON(!eie) in find_parent_nodes

[Sasha Levin]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit 9f05c09d6baef789726346397438cca4ec43c3ee ]

If we're looking for leafs that point to a data extent we want to record
the extent items that point at our bytenr.  At this point we have the
reference and we know for a fact that this leaf should have a reference
to our bytenr.  However if there's some sort of corruption we may not
find any references to our leaf, and thus could end up with eie == NULL.
Replace this BUG_ON() with an ASSERT() and then return -EUCLEAN for the
mortals.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/backref.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index 8b471579e26e1..baff31a147e7d 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -1366,10 +1366,18 @@ static int find_parent_nodes(struct btrfs_trans_handle *trans,
 				goto out;
 			if (!ret && extent_item_pos) {
 				/*
-				 * we've recorded that parent, so we must extend
-				 * its inode list here
+				 * We've recorded that parent, so we must extend
+				 * its inode list here.
+				 *
+				 * However if there was corruption we may not
+				 * have found an eie, return an error in this
+				 * case.
 				 */
-				BUG_ON(!eie);
+				ASSERT(eie);
+				if (!eie) {
+					ret = -EUCLEAN;
+					goto out;
+				}
 				while (eie->next)
 					eie = eie->next;
 				eie->next = ref->inode_list;
-- 
2.34.1

[PATCH AUTOSEL 5.10 101/116] net: mdio: Demote probed message to debug print

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 7590fc6f80ac2cbf23e6b42b668bbeded070850b ]

On systems with large numbers of MDIO bus/muxes the message indicating
that a given MDIO bus has been successfully probed is repeated for as
many buses we have, which can eat up substantial boot time for no
reason, demote to a debug print.

Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220103194024.2620-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/mdio_bus.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 2645ca35103c9..c416ab1d2b008 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -588,7 +588,7 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
 	mdiobus_setup_mdiodev_from_board_info(bus, mdiobus_create_device);
 
 	bus->state = MDIOBUS_REGISTERED;
-	pr_info("%s: probed\n", bus->name);
+	dev_dbg(&bus->dev, "probed\n");
 	return 0;
 
 error:
-- 
2.34.1

[PATCH AUTOSEL 5.10 102/116] mac80211: allow non-standard VHT MCS-10/11

[Sasha Levin]

From: Ping-Ke Shih <pkshih@realtek.com>

[ Upstream commit 04be6d337d37400ad5b3d5f27ca87645ee5a18a3 ]

Some AP can possibly try non-standard VHT rate and mac80211 warns and drops
packets, and leads low TCP throughput.

    Rate marked as a VHT rate but data is invalid: MCS: 10, NSS: 2
    WARNING: CPU: 1 PID: 7817 at net/mac80211/rx.c:4856 ieee80211_rx_list+0x223/0x2f0 [mac8021

Since commit c27aa56a72b8 ("cfg80211: add VHT rate entries for MCS-10 and MCS-11")
has added, mac80211 adds this support as well.

After this patch, throughput is good and iw can get the bitrate:
    rx bitrate:	975.1 MBit/s VHT-MCS 10 80MHz short GI VHT-NSS 2
or
    rx bitrate:	1083.3 MBit/s VHT-MCS 11 80MHz short GI VHT-NSS 2

Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192891
Reported-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20220103013623.17052-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 6a24431b90095..d27c444a19ed1 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -4800,7 +4800,7 @@ void ieee80211_rx_list(struct ieee80211_hw *hw, struct ieee80211_sta *pubsta,
 				goto drop;
 			break;
 		case RX_ENC_VHT:
-			if (WARN_ONCE(status->rate_idx > 9 ||
+			if (WARN_ONCE(status->rate_idx > 11 ||
 				      !status->nss ||
 				      status->nss > 8,
 				      "Rate marked as a VHT rate but data is invalid: MCS: %d, NSS: %d\n",
-- 
2.34.1

[PATCH AUTOSEL 5.10 103/116] dm btree: add a defensive bounds check to insert_at()

[Sasha Levin]

From: Joe Thornber <ejt@redhat.com>

[ Upstream commit 85bca3c05b6cca31625437eedf2060e846c4bbad ]

Corrupt metadata could trigger an out of bounds write.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/persistent-data/dm-btree.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/md/persistent-data/dm-btree.c b/drivers/md/persistent-data/dm-btree.c
index ef6e78d45d5b8..ee3e63aa864bf 100644
--- a/drivers/md/persistent-data/dm-btree.c
+++ b/drivers/md/persistent-data/dm-btree.c
@@ -83,14 +83,16 @@ void inc_children(struct dm_transaction_manager *tm, struct btree_node *n,
 }
 
 static int insert_at(size_t value_size, struct btree_node *node, unsigned index,
-		      uint64_t key, void *value)
-		      __dm_written_to_disk(value)
+		     uint64_t key, void *value)
+	__dm_written_to_disk(value)
 {
 	uint32_t nr_entries = le32_to_cpu(node->header.nr_entries);
+	uint32_t max_entries = le32_to_cpu(node->header.max_entries);
 	__le64 key_le = cpu_to_le64(key);
 
 	if (index > nr_entries ||
-	    index >= le32_to_cpu(node->header.max_entries)) {
+	    index >= max_entries ||
+	    nr_entries >= max_entries) {
 		DMERR("too many entries in btree node for insert");
 		__dm_unbless_for_disk(value);
 		return -ENOMEM;
-- 
2.34.1

[PATCH AUTOSEL 5.10 104/116] dm space map common: add bounds check to sm_ll_lookup_bitmap()

[Sasha Levin]

From: Joe Thornber <ejt@redhat.com>

[ Upstream commit cba23ac158db7f3cd48a923d6861bee2eb7a2978 ]

Corrupted metadata could warrant returning error from sm_ll_lookup_bitmap().

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/persistent-data/dm-space-map-common.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/md/persistent-data/dm-space-map-common.c b/drivers/md/persistent-data/dm-space-map-common.c
index a213bf11738fb..85853ab629717 100644
--- a/drivers/md/persistent-data/dm-space-map-common.c
+++ b/drivers/md/persistent-data/dm-space-map-common.c
@@ -281,6 +281,11 @@ int sm_ll_lookup_bitmap(struct ll_disk *ll, dm_block_t b, uint32_t *result)
 	struct disk_index_entry ie_disk;
 	struct dm_block *blk;
 
+	if (b >= ll->nr_blocks) {
+		DMERR_LIMIT("metadata block out of bounds");
+		return -EINVAL;
+	}
+
 	b = do_div(index, ll->entries_per_block);
 	r = ll->load_ie(ll, index, &ie_disk);
 	if (r < 0)
-- 
2.34.1

[PATCH AUTOSEL 5.10 105/116] mlxsw: pci: Avoid flow control for EMAD packets

[Sasha Levin]

From: Danielle Ratson <danieller@nvidia.com>

[ Upstream commit d43e4271747ace01a27a49a97a397cb4219f6487 ]

Locally generated packets ingress the device through its CPU port. When
the CPU port is congested and there are not enough credits in its
headroom buffer, packets can be dropped.

While this might be acceptable for data packets that traverse the
network, configuration packets exchanged between the host and the device
(EMADs) should not be subjected to this flow control.

The "sdq_lp" bit in the SDQ (Send Descriptor Queue) context allows the
host to instruct the device to treat packets sent on this queue as
"local processing" and always process them, regardless of the state of
the CPU port's headroom.

Add the definition of this bit and set it for the dedicated SDQ reserved
for the transmission of EMAD packets. This makes the "local processing"
bit in the WQE (Work Queue Element) redundant, so clear it.

Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/cmd.h | 12 ++++++++++++
 drivers/net/ethernet/mellanox/mlxsw/pci.c |  6 +++++-
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/cmd.h b/drivers/net/ethernet/mellanox/mlxsw/cmd.h
index 5ffdfb532cb7f..91f68fb0b420a 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/cmd.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/cmd.h
@@ -905,6 +905,18 @@ static inline int mlxsw_cmd_sw2hw_rdq(struct mlxsw_core *mlxsw_core,
  */
 MLXSW_ITEM32(cmd_mbox, sw2hw_dq, cq, 0x00, 24, 8);
 
+enum mlxsw_cmd_mbox_sw2hw_dq_sdq_lp {
+	MLXSW_CMD_MBOX_SW2HW_DQ_SDQ_LP_WQE,
+	MLXSW_CMD_MBOX_SW2HW_DQ_SDQ_LP_IGNORE_WQE,
+};
+
+/* cmd_mbox_sw2hw_dq_sdq_lp
+ * SDQ local Processing
+ * 0: local processing by wqe.lp
+ * 1: local processing (ignoring wqe.lp)
+ */
+MLXSW_ITEM32(cmd_mbox, sw2hw_dq, sdq_lp, 0x00, 23, 1);
+
 /* cmd_mbox_sw2hw_dq_sdq_tclass
  * SDQ: CPU Egress TClass
  * RDQ: Reserved
diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c
index 72d5c77bcb949..dbb16ce25bdf3 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/pci.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c
@@ -285,6 +285,7 @@ static int mlxsw_pci_sdq_init(struct mlxsw_pci *mlxsw_pci, char *mbox,
 			      struct mlxsw_pci_queue *q)
 {
 	int tclass;
+	int lp;
 	int i;
 	int err;
 
@@ -292,9 +293,12 @@ static int mlxsw_pci_sdq_init(struct mlxsw_pci *mlxsw_pci, char *mbox,
 	q->consumer_counter = 0;
 	tclass = q->num == MLXSW_PCI_SDQ_EMAD_INDEX ? MLXSW_PCI_SDQ_EMAD_TC :
 						      MLXSW_PCI_SDQ_CTL_TC;
+	lp = q->num == MLXSW_PCI_SDQ_EMAD_INDEX ? MLXSW_CMD_MBOX_SW2HW_DQ_SDQ_LP_IGNORE_WQE :
+						  MLXSW_CMD_MBOX_SW2HW_DQ_SDQ_LP_WQE;
 
 	/* Set CQ of same number of this SDQ. */
 	mlxsw_cmd_mbox_sw2hw_dq_cq_set(mbox, q->num);
+	mlxsw_cmd_mbox_sw2hw_dq_sdq_lp_set(mbox, lp);
 	mlxsw_cmd_mbox_sw2hw_dq_sdq_tclass_set(mbox, tclass);
 	mlxsw_cmd_mbox_sw2hw_dq_log2_dq_sz_set(mbox, 3); /* 8 pages */
 	for (i = 0; i < MLXSW_PCI_AQ_PAGES; i++) {
@@ -1599,7 +1603,7 @@ static int mlxsw_pci_skb_transmit(void *bus_priv, struct sk_buff *skb,
 
 	wqe = elem_info->elem;
 	mlxsw_pci_wqe_c_set(wqe, 1); /* always report completion */
-	mlxsw_pci_wqe_lp_set(wqe, !!tx_info->is_emad);
+	mlxsw_pci_wqe_lp_set(wqe, 0);
 	mlxsw_pci_wqe_type_set(wqe, MLXSW_PCI_WQE_TYPE_ETHERNET);
 
 	err = mlxsw_pci_wqe_frag_map(mlxsw_pci, wqe, 0, skb->data,
-- 
2.34.1

[PATCH AUTOSEL 5.10 106/116] net: phy: marvell: configure RGMII delays for 88E1118

[Sasha Levin]

From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>

[ Upstream commit f22725c95ececb703c3f741e8f946d23705630b7 ]

Corentin Labbe reports that the SSI 1328 does not work when allowing
the PHY to operate at gigabit speeds, but does work with the generic
PHY driver.

This appears to be because m88e1118_config_init() writes a fixed value
to the MSCR register, claiming that this is to enable 1G speeds.
However, this always sets bits 4 and 5, enabling RGMII transmit and
receive delays. The suspicion is that the original board this was
added for required the delays to make 1G speeds work.

Add the necessary configuration for RGMII delays for the 88E1118 to
bring this into line with the requirements for RGMII support, and thus
make the SSI 1328 work.

Corentin Labbe has tested this on gemini-ssi1328 and gemini-ns2502.

Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/marvell.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 91616182c311f..4dda2ab19c265 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1090,6 +1090,12 @@ static int m88e1118_config_init(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
+	if (phy_interface_is_rgmii(phydev)) {
+		err = m88e1121_config_aneg_rgmii_delays(phydev);
+		if (err < 0)
+			return err;
+	}
+
 	/* Adjust LED Control */
 	if (phydev->dev_flags & MARVELL_PHY_M1118_DNS323_LEDS)
 		err = phy_write(phydev, 0x10, 0x1100);
-- 
2.34.1

[PATCH AUTOSEL 5.10 107/116] net: gemini: allow any RGMII interface mode

[Sasha Levin]

From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>

[ Upstream commit 4e4f325a0a55907b14f579e6b1a38c53755e3de2 ]

The four RGMII interface modes take care of the required RGMII delay
configuration at the PHY and should not be limited by the network MAC
driver. Sadly, gemini was only permitting RGMII mode with no delays,
which would require the required delay to be inserted via PCB tracking
or by the MAC.

However, there are designs that require the PHY to add the delay, which
is impossible without Gemini permitting the other three PHY interface
modes. Fix the driver to allow these.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Link: https://lore.kernel.org/r/E1n4mpT-002PLd-Ha@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cortina/gemini.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c
index 8df6f081f2447..d11fcfd927c0b 100644
--- a/drivers/net/ethernet/cortina/gemini.c
+++ b/drivers/net/ethernet/cortina/gemini.c
@@ -305,21 +305,21 @@ static void gmac_speed_set(struct net_device *netdev)
 	switch (phydev->speed) {
 	case 1000:
 		status.bits.speed = GMAC_SPEED_1000;
-		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+		if (phy_interface_mode_is_rgmii(phydev->interface))
 			status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
 		netdev_dbg(netdev, "connect %s to RGMII @ 1Gbit\n",
 			   phydev_name(phydev));
 		break;
 	case 100:
 		status.bits.speed = GMAC_SPEED_100;
-		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+		if (phy_interface_mode_is_rgmii(phydev->interface))
 			status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
 		netdev_dbg(netdev, "connect %s to RGMII @ 100 Mbit\n",
 			   phydev_name(phydev));
 		break;
 	case 10:
 		status.bits.speed = GMAC_SPEED_10;
-		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+		if (phy_interface_mode_is_rgmii(phydev->interface))
 			status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
 		netdev_dbg(netdev, "connect %s to RGMII @ 10 Mbit\n",
 			   phydev_name(phydev));
@@ -389,6 +389,9 @@ static int gmac_setup_phy(struct net_device *netdev)
 		status.bits.mii_rmii = GMAC_PHY_GMII;
 		break;
 	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
 		netdev_dbg(netdev,
 			   "RGMII: set GMAC0 and GMAC1 to MII/RGMII mode\n");
 		status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
-- 
2.34.1

[PATCH AUTOSEL 5.10 108/116] net: dsa: hold rtnl_mutex when calling dsa_master_{setup,teardown}

[Sasha Levin]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit c146f9bc195a9dc3ad7fd000a14540e7c9df952d ]

DSA needs to simulate master tracking events when a binding is first
with a DSA master established and torn down, in order to give drivers
the simplifying guarantee that ->master_state_change calls are made
only when the master's readiness state to pass traffic changes.
master_state_change() provide a operational bool that DSA driver can use
to understand if DSA master is operational or not.
To avoid races, we need to block the reception of
NETDEV_UP/NETDEV_CHANGE/NETDEV_GOING_DOWN events in the netdev notifier
chain while we are changing the master's dev->dsa_ptr (this changes what
netdev_uses_dsa(dev) reports).

The dsa_master_setup() and dsa_master_teardown() functions optionally
require the rtnl_mutex to be held, if the tagger needs the master to be
promiscuous, these functions call dev_set_promiscuity(). Move the
rtnl_lock() from that function and make it top-level.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/dsa/dsa2.c   | 8 ++++++++
 net/dsa/master.c | 4 ++--
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index 71c8ef7d40870..d7cd7004a8e5d 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -577,6 +577,8 @@ static int dsa_tree_setup_master(struct dsa_switch_tree *dst)
 	struct dsa_port *dp;
 	int err;
 
+	rtnl_lock();
+
 	list_for_each_entry(dp, &dst->ports, list) {
 		if (dsa_port_is_cpu(dp)) {
 			err = dsa_master_setup(dp->master, dp);
@@ -585,6 +587,8 @@ static int dsa_tree_setup_master(struct dsa_switch_tree *dst)
 		}
 	}
 
+	rtnl_unlock();
+
 	return 0;
 }
 
@@ -592,9 +596,13 @@ static void dsa_tree_teardown_master(struct dsa_switch_tree *dst)
 {
 	struct dsa_port *dp;
 
+	rtnl_lock();
+
 	list_for_each_entry(dp, &dst->ports, list)
 		if (dsa_port_is_cpu(dp))
 			dsa_master_teardown(dp->master);
+
+	rtnl_unlock();
 }
 
 static int dsa_tree_setup(struct dsa_switch_tree *dst)
diff --git a/net/dsa/master.c b/net/dsa/master.c
index 45bd627b4e7bc..f9bc4233ca946 100644
--- a/net/dsa/master.c
+++ b/net/dsa/master.c
@@ -267,9 +267,9 @@ static void dsa_master_set_promiscuity(struct net_device *dev, int inc)
 	if (!ops->promisc_on_master)
 		return;
 
-	rtnl_lock();
+	ASSERT_RTNL();
+
 	dev_set_promiscuity(dev, inc);
-	rtnl_unlock();
 }
 
 static ssize_t tagging_show(struct device *d, struct device_attribute *attr,
-- 
2.34.1

[PATCH AUTOSEL 5.10 109/116] regulator: qcom_smd: Align probe function with rpmh-regulator

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@somainline.org>

[ Upstream commit 14e2976fbabdacb01335d7f91eeebbc89c67ddb1 ]

The RPMh regulator driver is much newer and gets more attention, which in
consequence makes it do a few things better. Update qcom_smd-regulator's
probe function to mimic what rpmh-regulator does to address a couple of
issues:

- Probe defer now works correctly, before it used to, well,
  kinda just die.. This fixes reliable probing on (at least) PM8994,
  because Linux apparently cannot deal with supply map dependencies yet..

- Regulator data is now matched more sanely: regulator data is matched
  against each individual regulator node name and throwing an -EINVAL if
  data is missing, instead of just assuming everything is fine and
  iterating over all subsequent array members.

- status = "disabled" will now work for disabling individual regulators in
  DT. Previously it didn't seem to do much if anything at all.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20211230023442.1123424-1-konrad.dybcio@somainline.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/qcom_smd-regulator.c | 100 +++++++++++++++++--------
 1 file changed, 70 insertions(+), 30 deletions(-)

diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index bb944ee5fe3b1..03e146e98abd5 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -9,6 +9,7 @@
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
 #include <linux/soc/qcom/smd-rpm.h>
 
 struct qcom_rpm_reg {
@@ -1107,52 +1108,91 @@ static const struct of_device_id rpm_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, rpm_of_match);
 
-static int rpm_reg_probe(struct platform_device *pdev)
+/**
+ * rpm_regulator_init_vreg() - initialize all attributes of a qcom_smd-regulator
+ * @vreg:		Pointer to the individual qcom_smd-regulator resource
+ * @dev:		Pointer to the top level qcom_smd-regulator PMIC device
+ * @node:		Pointer to the individual qcom_smd-regulator resource
+ *			device node
+ * @rpm:		Pointer to the rpm bus node
+ * @pmic_rpm_data:	Pointer to a null-terminated array of qcom_smd-regulator
+ *			resources defined for the top level PMIC device
+ *
+ * Return: 0 on success, errno on failure
+ */
+static int rpm_regulator_init_vreg(struct qcom_rpm_reg *vreg, struct device *dev,
+				   struct device_node *node, struct qcom_smd_rpm *rpm,
+				   const struct rpm_regulator_data *pmic_rpm_data)
 {
-	const struct rpm_regulator_data *reg;
-	const struct of_device_id *match;
-	struct regulator_config config = { };
+	struct regulator_config config = {};
+	const struct rpm_regulator_data *rpm_data;
 	struct regulator_dev *rdev;
+	int ret;
+
+	for (rpm_data = pmic_rpm_data; rpm_data->name; rpm_data++)
+		if (of_node_name_eq(node, rpm_data->name))
+			break;
+
+	if (!rpm_data->name) {
+		dev_err(dev, "Unknown regulator %pOFn\n", node);
+		return -EINVAL;
+	}
+
+	vreg->dev	= dev;
+	vreg->rpm	= rpm;
+	vreg->type	= rpm_data->type;
+	vreg->id	= rpm_data->id;
+
+	memcpy(&vreg->desc, rpm_data->desc, sizeof(vreg->desc));
+	vreg->desc.name = rpm_data->name;
+	vreg->desc.supply_name = rpm_data->supply;
+	vreg->desc.owner = THIS_MODULE;
+	vreg->desc.type = REGULATOR_VOLTAGE;
+	vreg->desc.of_match = rpm_data->name;
+
+	config.dev		= dev;
+	config.of_node		= node;
+	config.driver_data	= vreg;
+
+	rdev = devm_regulator_register(dev, &vreg->desc, &config);
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		dev_err(dev, "%pOFn: devm_regulator_register() failed, ret=%d\n", node, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rpm_reg_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct rpm_regulator_data *vreg_data;
+	struct device_node *node;
 	struct qcom_rpm_reg *vreg;
 	struct qcom_smd_rpm *rpm;
+	int ret;
 
 	rpm = dev_get_drvdata(pdev->dev.parent);
 	if (!rpm) {
-		dev_err(&pdev->dev, "unable to retrieve handle to rpm\n");
+		dev_err(&pdev->dev, "Unable to retrieve handle to rpm\n");
 		return -ENODEV;
 	}
 
-	match = of_match_device(rpm_of_match, &pdev->dev);
-	if (!match) {
-		dev_err(&pdev->dev, "failed to match device\n");
+	vreg_data = of_device_get_match_data(dev);
+	if (!vreg_data)
 		return -ENODEV;
-	}
 
-	for (reg = match->data; reg->name; reg++) {
+	for_each_available_child_of_node(dev->of_node, node) {
 		vreg = devm_kzalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
 		if (!vreg)
 			return -ENOMEM;
 
-		vreg->dev = &pdev->dev;
-		vreg->type = reg->type;
-		vreg->id = reg->id;
-		vreg->rpm = rpm;
-
-		memcpy(&vreg->desc, reg->desc, sizeof(vreg->desc));
-
-		vreg->desc.id = -1;
-		vreg->desc.owner = THIS_MODULE;
-		vreg->desc.type = REGULATOR_VOLTAGE;
-		vreg->desc.name = reg->name;
-		vreg->desc.supply_name = reg->supply;
-		vreg->desc.of_match = reg->name;
-
-		config.dev = &pdev->dev;
-		config.driver_data = vreg;
-		rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config);
-		if (IS_ERR(rdev)) {
-			dev_err(&pdev->dev, "failed to register %s\n", reg->name);
-			return PTR_ERR(rdev);
+		ret = rpm_regulator_init_vreg(vreg, dev, node, rpm, vreg_data);
+
+		if (ret < 0) {
+			of_node_put(node);
+			return ret;
 		}
 	}
 
-- 
2.34.1

[PATCH AUTOSEL 5.10 110/116] serial: pl010: Drop CR register reset on set_termios

[Sasha Levin]

From: Lukas Wunner <lukas@wunner.de>

[ Upstream commit 08a0c6dff91c965e39905cf200d22db989203ccb ]

pl010_set_termios() briefly resets the CR register to zero.

Where does this register write come from?

The PL010 driver's IRQ handler ambauart_int() originally modified the CR
register without holding the port spinlock.  ambauart_set_termios() also
modified that register.  To prevent concurrent read-modify-writes by the
IRQ handler and to prevent transmission while changing baudrate,
ambauart_set_termios() had to disable interrupts.  That is achieved by
writing zero to the CR register.

However in 2004 the PL010 driver was amended to acquire the port
spinlock in the IRQ handler, obviating the need to disable interrupts in
->set_termios():
https://git.kernel.org/history/history/c/157c0342e591

That rendered the CR register write obsolete.  Drop it.

Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/fcaff16e5b1abb4cc3da5a2879ac13f278b99ed0.1641128728.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/amba-pl010.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 3284f34e9dfe1..75d61e038a775 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -448,14 +448,11 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
 	if ((termios->c_cflag & CREAD) == 0)
 		uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
 
-	/* first, disable everything */
 	old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
 
 	if (UART_ENABLE_MS(port, termios->c_cflag))
 		old_cr |= UART010_CR_MSIE;
 
-	writel(0, uap->port.membase + UART010_CR);
-
 	/* Set baud rate */
 	quot -= 1;
 	writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
-- 
2.34.1

[PATCH AUTOSEL 5.10 111/116] serial: core: Keep mctrl register state and cached copy in sync

[Sasha Levin]

From: Lukas Wunner <lukas@wunner.de>

[ Upstream commit 93a770b7e16772530196674ffc79bb13fa927dc6 ]

struct uart_port contains a cached copy of the Modem Control signals.
It is used to skip register writes in uart_update_mctrl() if the new
signal state equals the old signal state.  It also avoids a register
read to obtain the current state of output signals.

When a uart_port is registered, uart_configure_port() changes signal
state but neglects to keep the cached copy in sync.  That may cause
a subsequent register write to be incorrectly skipped.  Fix it before
it trips somebody up.

This behavior has been present ever since the serial core was introduced
in 2002:
https://git.kernel.org/history/history/c/33c0d1b0c3eb

So far it was never an issue because the cached copy is initialized to 0
by kzalloc() and when uart_configure_port() is executed, at most DTR has
been set by uart_set_options() or sunsu_console_setup().  Therefore,
a stable designation seems unnecessary.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/bceeaba030b028ed810272d55d5fc6f3656ddddb.1641129752.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/serial_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 046bedca7b8f5..55108db5b64bf 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2414,7 +2414,8 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
 		 * We probably don't need a spinlock around this, but
 		 */
 		spin_lock_irqsave(&port->lock, flags);
-		port->ops->set_mctrl(port, port->mctrl & TIOCM_DTR);
+		port->mctrl &= TIOCM_DTR;
+		port->ops->set_mctrl(port, port->mctrl);
 		spin_unlock_irqrestore(&port->lock, flags);
 
 		/*
-- 
2.34.1

[PATCH AUTOSEL 5.10 112/116] random: do not throw away excess input to crng_fast_load

[Sasha Levin]

From: "Jason A. Donenfeld" <Jason@zx2c4.com>

[ Upstream commit 73c7733f122e8d0107f88655a12011f68f69e74b ]

When crng_fast_load() is called by add_hwgenerator_randomness(), we
currently will advance to crng_init==1 once we've acquired 64 bytes, and
then throw away the rest of the buffer. Usually, that is not a problem:
When add_hwgenerator_randomness() gets called via EFI or DT during
setup_arch(), there won't be any IRQ randomness. Therefore, the 64 bytes
passed by EFI exactly matches what is needed to advance to crng_init==1.
Usually, DT seems to pass 64 bytes as well -- with one notable exception
being kexec, which hands over 128 bytes of entropy to the kexec'd kernel.
In that case, we'll advance to crng_init==1 once 64 of those bytes are
consumed by crng_fast_load(), but won't continue onward feeding in bytes
to progress to crng_init==2. This commit fixes the issue by feeding
any leftover bytes into the next phase in add_hwgenerator_randomness().

[linux@dominikbrodowski.net: rewrite commit message]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/random.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/char/random.c b/drivers/char/random.c
index 340ad21491e28..aff499535fb02 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -873,12 +873,14 @@ static void numa_crng_init(void) {}
 
 /*
  * crng_fast_load() can be called by code in the interrupt service
- * path.  So we can't afford to dilly-dally.
+ * path.  So we can't afford to dilly-dally. Returns the number of
+ * bytes processed from cp.
  */
-static int crng_fast_load(const char *cp, size_t len)
+static size_t crng_fast_load(const char *cp, size_t len)
 {
 	unsigned long flags;
 	char *p;
+	size_t ret = 0;
 
 	if (!spin_trylock_irqsave(&primary_crng.lock, flags))
 		return 0;
@@ -889,7 +891,7 @@ static int crng_fast_load(const char *cp, size_t len)
 	p = (unsigned char *) &primary_crng.state[4];
 	while (len > 0 && crng_init_cnt < CRNG_INIT_CNT_THRESH) {
 		p[crng_init_cnt % CHACHA_KEY_SIZE] ^= *cp;
-		cp++; crng_init_cnt++; len--;
+		cp++; crng_init_cnt++; len--; ret++;
 	}
 	spin_unlock_irqrestore(&primary_crng.lock, flags);
 	if (crng_init_cnt >= CRNG_INIT_CNT_THRESH) {
@@ -897,7 +899,7 @@ static int crng_fast_load(const char *cp, size_t len)
 		crng_init = 1;
 		pr_notice("fast init done\n");
 	}
-	return 1;
+	return ret;
 }
 
 /*
@@ -1281,7 +1283,7 @@ void add_interrupt_randomness(int irq, int irq_flags)
 	if (unlikely(crng_init == 0)) {
 		if ((fast_pool->count >= 64) &&
 		    crng_fast_load((char *) fast_pool->pool,
-				   sizeof(fast_pool->pool))) {
+				   sizeof(fast_pool->pool)) > 0) {
 			fast_pool->count = 0;
 			fast_pool->last = now;
 		}
@@ -2299,8 +2301,11 @@ void add_hwgenerator_randomness(const char *buffer, size_t count,
 	struct entropy_store *poolp = &input_pool;
 
 	if (unlikely(crng_init == 0)) {
-		crng_fast_load(buffer, count);
-		return;
+		size_t ret = crng_fast_load(buffer, count);
+		count -= ret;
+		buffer += ret;
+		if (!count || crng_init == 0)
+			return;
 	}
 
 	/* Suspend writing if we're above the trickle threshold.
-- 
2.34.1

[PATCH AUTOSEL 5.10 113/116] parisc: Avoid calling faulthandler_disabled() twice

[Sasha Levin]

From: John David Anglin <dave.anglin@bell.net>

[ Upstream commit 9e9d4b460f23bab61672eae397417d03917d116c ]

In handle_interruption(), we call faulthandler_disabled() to check whether the
fault handler is not disabled. If the fault handler is disabled, we immediately
call do_page_fault(). It then calls faulthandler_disabled(). If disabled,
do_page_fault() attempts to fixup the exception by jumping to no_context:

no_context:

        if (!user_mode(regs) && fixup_exception(regs)) {
                return;
        }

        parisc_terminate("Bad Address (null pointer deref?)", regs, code, address);

Apart from the error messages, the two blocks of code perform the same
function.

We can avoid two calls to faulthandler_disabled() by a simple revision
to the code in handle_interruption().

Note: I didn't try to fix the formatting of this code block.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/kernel/traps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 43f56335759a4..269b737d26299 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -784,7 +784,7 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
 	     * unless pagefault_disable() was called before.
 	     */
 
-	    if (fault_space == 0 && !faulthandler_disabled())
+	    if (faulthandler_disabled() || fault_space == 0)
 	    {
 		/* Clean up and return if in exception table. */
 		if (fixup_exception(regs))
-- 
2.34.1

[PATCH AUTOSEL 5.10 114/116] scripts: sphinx-pre-install: Fix ctex support on Debian

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab@kernel.org>

[ Upstream commit 87d6576ddf8ac25f36597bc93ca17f6628289c16 ]

The name of the package with ctexhook.sty is different on
Debian/Ubuntu.

Reported-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/63882425609a2820fac78f5e94620abeb7ed5f6f.1641429634.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/sphinx-pre-install | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/scripts/sphinx-pre-install b/scripts/sphinx-pre-install
index 828a8615a9181..b32a20782c851 100755
--- a/scripts/sphinx-pre-install
+++ b/scripts/sphinx-pre-install
@@ -370,6 +370,9 @@ sub give_debian_hints()
 	);
 
 	if ($pdf) {
+		check_missing_file(["/usr/share/texlive/texmf-dist/tex/latex/ctex/ctexhook.sty"],
+				   "texlive-lang-chinese", 2);
+
 		check_missing_file(["/usr/share/fonts/truetype/dejavu/DejaVuSans.ttf"],
 				   "fonts-dejavu", 2);
 
-- 
2.34.1

[PATCH AUTOSEL 5.10 115/116] x86/kbuild: Enable CONFIG_KALLSYMS_ALL=y in the defconfigs

[Sasha Levin]

From: Ingo Molnar <mingo@kernel.org>

[ Upstream commit b6aa86cff44cf099299d3a5e66348cb709cd7964 ]

Most distro kernels have this option enabled, to improve debug output.

Lockdep also selects it.

Enable this in the defconfig kernel as well, to make it more
representative of what people are using on x86.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/YdTn7gssoMVDMgMw@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/configs/i386_defconfig   | 1 +
 arch/x86/configs/x86_64_defconfig | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 78210793d357c..38d7acb9610cc 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -264,3 +264,4 @@ CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 CONFIG_EARLY_PRINTK_DBGP=y
 CONFIG_DEBUG_BOOT_PARAMS=y
+CONFIG_KALLSYMS_ALL=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 9936528e19393..c6e587a9a6f85 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -260,3 +260,4 @@ CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 CONFIG_EARLY_PRINTK_DBGP=y
 CONFIG_DEBUG_BOOT_PARAMS=y
+CONFIG_KALLSYMS_ALL=y
-- 
2.34.1

[PATCH AUTOSEL 5.10 116/116] ext4: allow to change s_last_trim_minblks via sysfs

[Sasha Levin]

From: Lukas Czerner <lczerner@redhat.com>

[ Upstream commit 4a69aecbfb30a3fc85bf8028386c047d5607a97a ]

Ext4 has an optimization mechanism for batched disacrd (FITRIM) that
should help speed up subsequent calls of FITRIM ioctl by skipping the
groups that were previously trimmed. However because the FITRIM allows
to set the minimum size of an extent to trim, ext4 stores the last
minimum extent size and only avoids trimming the group if it was
previously trimmed with minimum extent size equal to, or smaller than
the current call.

There is currently no way to bypass the optimization without
umount/mount cycle. This becomes a problem when the file system is
live migrated to a different storage, because the optimization will
prevent possibly useful discard calls to the storage.

Fix it by exporting the s_last_trim_minblks via sysfs interface which
will allow us to set the minimum size to the number of blocks larger
than subsequent FITRIM call, effectively bypassing the optimization.

By setting the s_last_trim_minblks to ULONG_MAX the optimization will be
effectively cleared regardless of the previous state, or file system
configuration.

For example:
getconf ULONG_MAX > /sys/fs/ext4/dm-1/last_trim_minblks

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reported-by: Laurent GUERBY <laurent@guerby.net>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20211103145122.17338-2-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/sysfs.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/ext4/sysfs.c b/fs/ext4/sysfs.c
index f24bef3be48a3..4192b4af10602 100644
--- a/fs/ext4/sysfs.c
+++ b/fs/ext4/sysfs.c
@@ -250,6 +250,7 @@ EXT4_ATTR(last_error_time, 0444, last_error_time);
 EXT4_ATTR(journal_task, 0444, journal_task);
 EXT4_RW_ATTR_SBI_UI(mb_prefetch, s_mb_prefetch);
 EXT4_RW_ATTR_SBI_UI(mb_prefetch_limit, s_mb_prefetch_limit);
+EXT4_RW_ATTR_SBI_UL(last_trim_minblks, s_last_trim_minblks);
 
 static unsigned int old_bump_val = 128;
 EXT4_ATTR_PTR(max_writeback_mb_bump, 0444, pointer_ui, &old_bump_val);
@@ -299,6 +300,7 @@ static struct attribute *ext4_attrs[] = {
 #endif
 	ATTR_LIST(mb_prefetch),
 	ATTR_LIST(mb_prefetch_limit),
+	ATTR_LIST(last_trim_minblks),
 	NULL,
 };
 ATTRIBUTE_GROUPS(ext4);
-- 
2.34.1

Re: [PATCH AUTOSEL 5.10 116/116] ext4: allow to change s_last_trim_minblks via sysfs

[Lukas Czerner]

Why was this selected? It is a new feature not a fix, it's not marked
for a stable kernel and moreover it's incomplete
(2327fb2e23416cfb2795ccca2f77d4d65925be99 is a prerequisite).

I have the same question for the patches for 5.15 and 5.16.

I think we should either drop it, or at the very least include the above
mentioned commit as well.

Thanks!
-Lukas

On Mon, Jan 17, 2022 at 09:40:07PM -0500, Sasha Levin wrote:
> From: Lukas Czerner <lczerner@redhat.com>
> 
> [ Upstream commit 4a69aecbfb30a3fc85bf8028386c047d5607a97a ]
> 
> Ext4 has an optimization mechanism for batched disacrd (FITRIM) that
> should help speed up subsequent calls of FITRIM ioctl by skipping the
> groups that were previously trimmed. However because the FITRIM allows
> to set the minimum size of an extent to trim, ext4 stores the last
> minimum extent size and only avoids trimming the group if it was
> previously trimmed with minimum extent size equal to, or smaller than
> the current call.
> 
> There is currently no way to bypass the optimization without
> umount/mount cycle. This becomes a problem when the file system is
> live migrated to a different storage, because the optimization will
> prevent possibly useful discard calls to the storage.
> 
> Fix it by exporting the s_last_trim_minblks via sysfs interface which
> will allow us to set the minimum size to the number of blocks larger
> than subsequent FITRIM call, effectively bypassing the optimization.
> 
> By setting the s_last_trim_minblks to ULONG_MAX the optimization will be
> effectively cleared regardless of the previous state, or file system
> configuration.
> 
> For example:
> getconf ULONG_MAX > /sys/fs/ext4/dm-1/last_trim_minblks
> 
> Signed-off-by: Lukas Czerner <lczerner@redhat.com>
> Reported-by: Laurent GUERBY <laurent@guerby.net>
> Reviewed-by: Andreas Dilger <adilger@dilger.ca>
> Link: https://lore.kernel.org/r/20211103145122.17338-2-lczerner@redhat.com
> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  fs/ext4/sysfs.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/fs/ext4/sysfs.c b/fs/ext4/sysfs.c
> index f24bef3be48a3..4192b4af10602 100644
> --- a/fs/ext4/sysfs.c
> +++ b/fs/ext4/sysfs.c
> @@ -250,6 +250,7 @@ EXT4_ATTR(last_error_time, 0444, last_error_time);
>  EXT4_ATTR(journal_task, 0444, journal_task);
>  EXT4_RW_ATTR_SBI_UI(mb_prefetch, s_mb_prefetch);
>  EXT4_RW_ATTR_SBI_UI(mb_prefetch_limit, s_mb_prefetch_limit);
> +EXT4_RW_ATTR_SBI_UL(last_trim_minblks, s_last_trim_minblks);
>  
>  static unsigned int old_bump_val = 128;
>  EXT4_ATTR_PTR(max_writeback_mb_bump, 0444, pointer_ui, &old_bump_val);
> @@ -299,6 +300,7 @@ static struct attribute *ext4_attrs[] = {
>  #endif
>  	ATTR_LIST(mb_prefetch),
>  	ATTR_LIST(mb_prefetch_limit),
> +	ATTR_LIST(last_trim_minblks),
>  	NULL,
>  };
>  ATTRIBUTE_GROUPS(ext4);
> -- 
> 2.34.1
> 

Re: [PATCH AUTOSEL 5.10 116/116] ext4: allow to change s_last_trim_minblks via sysfs

[Sasha Levin]

On Tue, Jan 18, 2022 at 10:03:46AM +0100, Lukas Czerner wrote:
>Why was this selected? It is a new feature not a fix, it's not marked
>for a stable kernel and moreover it's incomplete
>(2327fb2e23416cfb2795ccca2f77d4d65925be99 is a prerequisite).
>
>I have the same question for the patches for 5.15 and 5.16.
>
>I think we should either drop it, or at the very least include the above
>mentioned commit as well.

I can drop it from everywhere, thanks!

-- 
Thanks,
Sasha

Re: [PATCH AUTOSEL 5.10 001/116] Bluetooth: Fix debugfs entry leak in hci_register_dev()

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 197 bytes --]

Hi!

Is there a git tree with the autosel patches or other automated way to
access them? It would help the review.

Best regards,
								Pavel
-- 
http://www.livejournal.com/~pavelmachek

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH AUTOSEL 5.10 001/116] Bluetooth: Fix debugfs entry leak in hci_register_dev()

[Sasha Levin]

On Tue, Jan 18, 2022 at 06:13:27PM +0100, Pavel Machek wrote:
>Hi!
>
>Is there a git tree with the autosel patches or other automated way to
>access them? It would help the review.

Not currently, happy to push them out if folks are interested.

You can always pick them off of the mailing list with lei :)


-- 
Thanks,
Sasha