[PATCH 5.10 00/74] 5.10.99-rc1 review

[PATCH 5.10 00/74] 5.10.99-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.10.99 release.
There are 74 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.99-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.10.99-rc1

Florian Westphal <fw@strlen.de>
    selftests: nft_concat_range: add test for reload with no element add/del

Waiman Long <longman@redhat.com>
    cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning

Arınç ÜNAL <arinc.unal@arinc9.com>
    net: dsa: mt7530: make NET_DSA_MT7530 select MEDIATEK_GE_PHY

Xin Yin <yinxin.x@bytedance.com>
    ext4: fix incorrect type issue during replay_del_range

Ritesh Harjani <riteshh@linux.ibm.com>
    ext4: fix error handling in ext4_fc_record_modified_inode()

Ritesh Harjani <riteshh@linux.ibm.com>
    ext4: fix error handling in ext4_restore_inline_data()

Xin Yin <yinxin.x@bytedance.com>
    ext4: modify the logic of ext4_mb_new_blocks_simple

Xin Yin <yinxin.x@bytedance.com>
    ext4: prevent used blocks from being allocated during fast commit replay

Sergey Shtylyov <s.shtylyov@omp.ru>
    EDAC/xgene: Fix deferred probing

Sergey Shtylyov <s.shtylyov@omp.ru>
    EDAC/altera: Fix deferred probing

Peter Zijlstra <peterz@infradead.org>
    x86/perf: Default set FREEZE_ON_SMI for all

Tristan Hume <tristan@thume.ca>
    perf/x86/intel/pt: Fix crash with stop filters in single-range mode

Ian Rogers <irogers@google.com>
    perf stat: Fix display of grouped aliased events

Helge Deller <deller@gmx.de>
    fbcon: Add option to enable legacy hardware acceleration

Helge Deller <deller@gmx.de>
    Revert "fbcon: Disable accelerated scrolling"

Riwen Lu <luriwen@kylinos.cn>
    rtc: cmos: Evaluate century appropriate

Nathan Chancellor <nathan@kernel.org>
    tools/resolve_btfids: Do not print any commands when building silently

Muhammad Usama Anjum <usama.anjum@collabora.com>
    selftests: futex: Use variable MAKE instead of make

Muhammad Usama Anjum <usama.anjum@collabora.com>
    selftests/exec: Remove pipe from TEST_GEN_FILES

Hou Tao <hotforest@gmail.com>
    bpf: Use VM_MAP instead of VM_ALLOC for ringbuf

Haiyue Wang <haiyue.wang@intel.com>
    gve: fix the wrong AdminQ buffer queue index check

Dai Ngo <dai.ngo@oracle.com>
    nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client.

John Meneghini <jmeneghi@redhat.com>
    scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe

Florian Fainelli <f.fainelli@gmail.com>
    pinctrl: bcm2835: Fix a few error paths

Łukasz Bartosik <lb@semihalf.com>
    pinctrl: intel: fix unexpected interrupt

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line

Dan Carpenter <dan.carpenter@oracle.com>
    ASoC: max9759: fix underflow in speaker_gain_control_put()

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    ASoC: cpcap: Check for NULL pointer after calling of_get_child_by_name

Robert Hancock <robert.hancock@calian.com>
    ASoC: xilinx: xlnx_formatter_pcm: Make buffer bytes multiple of period bytes

Miaoqian Lin <linmq006@gmail.com>
    ASoC: fsl: Add missing error handling in pcm030_fabric_probe

Dan Carpenter <dan.carpenter@oracle.com>
    drm/i915/overlay: Prevent divide by zero bugs in scaling

Yannick Vignon <yannick.vignon@nxp.com>
    net: stmmac: ensure PTP time register reads are consistent

Camel Guo <camelg@axis.com>
    net: stmmac: dump gmac4 DMA registers correctly

Lior Nahmanson <liorna@nvidia.com>
    net: macsec: Verify that send_sci is on when setting Tx sci explicitly

Lior Nahmanson <liorna@nvidia.com>
    net: macsec: Fix offload support for NETDEV_UNREGISTER event

Miquel Raynal <miquel.raynal@bootlin.com>
    net: ieee802154: Return meaningful error codes from the netlink helpers

Miquel Raynal <miquel.raynal@bootlin.com>
    net: ieee802154: ca8210: Stop leaking skb's

Miquel Raynal <miquel.raynal@bootlin.com>
    net: ieee802154: mcr20a: Fix lifs/sifs periods

Miquel Raynal <miquel.raynal@bootlin.com>
    net: ieee802154: hwsim: Ensure proper channel selection at probe time

Xin Xiong <xiongx18@fudan.edu.cn>
    spi: uniphier: fix reference count leak in uniphier_spi_probe()

Miaoqian Lin <linmq006@gmail.com>
    spi: meson-spicc: add IRQ check in meson_spicc_probe

Benjamin Gaignard <benjamin.gaignard@collabora.com>
    spi: mediatek: Avoid NULL pointer crash in interrupt

Kamal Dasu <kdasu.kdev@gmail.com>
    spi: bcm-qspi: check for valid cs before applying chip select

Joerg Roedel <jroedel@suse.de>
    iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()

Guoqing Jiang <guoqing.jiang@linux.dev>
    iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping()

Leon Romanovsky <leon@kernel.org>
    RDMA/mlx4: Don't continue event handler after memory allocation failure

Bernard Metzler <bmt@zurich.ibm.com>
    RDMA/siw: Fix broken RDMA Read Fence/Resume logic.

Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
    IB/rdmavt: Validate remote_addr during loopback atomic tests

Leon Romanovsky <leon@kernel.org>
    RDMA/ucma: Protect mc during concurrent multicast leaves

Maor Gottlieb <maorg@nvidia.com>
    RDMA/cma: Use correct address when leaving multicast group

Yutian Yang <nglaive@gmail.com>
    memcg: charge fs_context and legacy_fs_context

Guenter Roeck <linux@roeck-us.net>
    Revert "ASoC: mediatek: Check for error clk pointer"

Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
    IB/hfi1: Fix AIP early init panic

Jordy Zomer <jordy@pwning.systems>
    dma-buf: heaps: Fix potential spectre v1 gadget

Martin K. Petersen <martin.petersen@oracle.com>
    block: bio-integrity: Advance seed correctly for larger interval sizes

Lang Yu <lang.yu@amd.com>
    mm/kmemleak: avoid scanning potential huge holes

Mike Rapoport <rppt@kernel.org>
    mm/pgtable: define pte_index so that preprocessor could recognize it

Pasha Tatashin <pasha.tatashin@soleen.com>
    mm/debug_vm_pgtable: remove pte entry from the page table

Uday Shankar <ushankar@purestorage.com>
    nvme-fabrics: fix state check in nvmf_ctlr_matches_baseopts()

Aun-Ali Zaidi <admin@kodeit.net>
    drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina panels

Nick Lopez <github@glowingmonkey.org>
    drm/nouveau: fix off by one in BIOS boundary checking

Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
    btrfs: fix deadlock between quota disable and qgroup rescan worker

Christian Lachner <gladiac@gmail.com>
    ALSA: hda/realtek: Fix silent output on Gigabyte X570 Aorus Xtreme after reboot from Windows

Christian Lachner <gladiac@gmail.com>
    ALSA: hda/realtek: Fix silent output on Gigabyte X570S Aorus Master (newer chipset)

Christian Lachner <gladiac@gmail.com>
    ALSA: hda/realtek: Add missing fixup-model entry for Gigabyte X570 ALC1220 quirks

Albert Geantă <albertgeanta@gmail.com>
    ALSA: hda/realtek: Add quirk for ASUS GU603

Takashi Iwai <tiwai@suse.de>
    ALSA: hda: realtek: Fix race at concurrent COEF updates

Takashi Iwai <tiwai@suse.de>
    ALSA: hda: Fix UAF of leds class devs at unbinding

Jonas Hahnfeld <hahnjo@hahnjo.de>
    ALSA: usb-audio: Correct quirk for VF0770

Mark Brown <broonie@kernel.org>
    ASoC: ops: Reject out of bounds values in snd_soc_put_xr_sx()

Mark Brown <broonie@kernel.org>
    ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx()

Mark Brown <broonie@kernel.org>
    ASoC: ops: Reject out of bounds values in snd_soc_put_volsw()

Paul Moore <paul@paul-moore.com>
    audit: improve audit queue handling when "audit=1" on cmdline

Vratislav Bendel <vbendel@redhat.com>
    selinux: fix double free of cond_list on error paths


-------------

Diffstat:

 Documentation/gpu/todo.rst                         | 18 -----
 Makefile                                           |  4 +-
 arch/x86/events/intel/core.c                       | 13 ++++
 arch/x86/events/intel/pt.c                         |  5 +-
 block/bio-integrity.c                              |  2 +-
 drivers/dma-buf/dma-heap.c                         |  2 +
 drivers/edac/altera_edac.c                         |  2 +-
 drivers/edac/xgene_edac.c                          |  2 +-
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c   | 20 +++++
 drivers/gpu/drm/i915/display/intel_overlay.c       |  3 +
 drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c    |  2 +-
 drivers/infiniband/core/cma.c                      | 22 +++---
 drivers/infiniband/core/ucma.c                     | 34 ++++++---
 drivers/infiniband/hw/hfi1/ipoib_main.c            | 13 +---
 drivers/infiniband/hw/mlx4/main.c                  |  2 +-
 drivers/infiniband/sw/rdmavt/qp.c                  |  2 +
 drivers/infiniband/sw/siw/siw.h                    |  7 +-
 drivers/infiniband/sw/siw/siw_qp_rx.c              | 20 ++---
 drivers/iommu/amd/init.c                           |  2 +
 drivers/iommu/intel/irq_remapping.c                | 13 +++-
 drivers/net/dsa/Kconfig                            |  1 +
 drivers/net/ethernet/google/gve/gve_adminq.c       |  2 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h    |  1 +
 .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c   | 19 ++++-
 .../net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c  | 19 +++--
 drivers/net/ieee802154/ca8210.c                    |  1 +
 drivers/net/ieee802154/mac802154_hwsim.c           |  1 +
 drivers/net/ieee802154/mcr20a.c                    |  4 +-
 drivers/net/macsec.c                               | 33 +++++---
 drivers/nvme/host/fabrics.h                        |  1 +
 drivers/pinctrl/bcm/pinctrl-bcm2835.c              | 23 ++++--
 drivers/pinctrl/intel/pinctrl-intel.c              | 64 +++++++++-------
 drivers/rtc/rtc-mc146818-lib.c                     |  2 +-
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c                  | 21 +++--
 drivers/soc/mediatek/mtk-scpsys.c                  | 15 +---
 drivers/spi/spi-bcm-qspi.c                         |  2 +-
 drivers/spi/spi-meson-spicc.c                      |  5 ++
 drivers/spi/spi-mt65xx.c                           |  2 +-
 drivers/spi/spi-uniphier.c                         | 18 ++++-
 drivers/video/console/Kconfig                      | 20 +++++
 drivers/video/fbdev/core/fbcon.c                   | 68 ++++++++++++++---
 drivers/video/fbdev/core/fbcon.h                   | 15 +++-
 drivers/video/fbdev/core/fbcon_ccw.c               | 10 +--
 drivers/video/fbdev/core/fbcon_cw.c                | 10 +--
 drivers/video/fbdev/core/fbcon_rotate.h            |  4 +-
 drivers/video/fbdev/core/fbcon_ud.c                | 20 ++---
 fs/btrfs/qgroup.c                                  | 21 ++++-
 fs/ext4/ext4.h                                     |  3 +
 fs/ext4/extents.c                                  |  4 +
 fs/ext4/fast_commit.c                              | 89 ++++++++++++----------
 fs/ext4/inline.c                                   | 10 ++-
 fs/ext4/mballoc.c                                  | 26 ++++---
 fs/fs_context.c                                    |  4 +-
 fs/nfsd/nfs4state.c                                |  4 +-
 include/linux/pgtable.h                            |  1 +
 kernel/audit.c                                     | 62 ++++++++++-----
 kernel/bpf/ringbuf.c                               |  2 +-
 kernel/cgroup/cpuset.c                             | 10 +++
 mm/debug_vm_pgtable.c                              |  2 +
 mm/kmemleak.c                                      | 13 ++--
 net/ieee802154/nl802154.c                          |  8 +-
 security/selinux/ss/conditional.c                  |  3 +-
 sound/pci/hda/hda_generic.c                        | 17 ++++-
 sound/pci/hda/hda_generic.h                        |  3 +
 sound/pci/hda/patch_realtek.c                      | 67 +++++++++++++---
 sound/soc/codecs/cpcap.c                           |  2 +
 sound/soc/codecs/max9759.c                         |  3 +-
 sound/soc/fsl/pcm030-audio-fabric.c                | 11 ++-
 sound/soc/soc-ops.c                                | 29 ++++++-
 sound/soc/xilinx/xlnx_formatter_pcm.c              | 27 ++++++-
 sound/usb/quirks-table.h                           |  2 +-
 tools/bpf/resolve_btfids/Makefile                  |  6 +-
 tools/perf/util/stat-display.c                     | 19 ++---
 tools/testing/selftests/exec/Makefile              |  2 +-
 tools/testing/selftests/futex/Makefile             |  4 +-
 .../selftests/netfilter/nft_concat_range.sh        | 72 ++++++++++++++++-
 76 files changed, 772 insertions(+), 323 deletions(-)

[PATCH 5.10 01/74] selinux: fix double free of cond_list on error paths

[Greg Kroah-Hartman]

From: Vratislav Bendel <vbendel@redhat.com>

commit 186edf7e368c40d06cf727a1ad14698ea67b74ad upstream.

On error path from cond_read_list() and duplicate_policydb_cond_list()
the cond_list_destroy() gets called a second time in caller functions,
resulting in NULL pointer deref.  Fix this by resetting the
cond_list_len to 0 in cond_list_destroy(), making subsequent calls a
noop.

Also consistently reset the cond_list pointer to NULL after freeing.

Cc: stable@vger.kernel.org
Signed-off-by: Vratislav Bendel <vbendel@redhat.com>
[PM: fix line lengths in the description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 security/selinux/ss/conditional.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/security/selinux/ss/conditional.c
+++ b/security/selinux/ss/conditional.c
@@ -152,6 +152,8 @@ static void cond_list_destroy(struct pol
 	for (i = 0; i < p->cond_list_len; i++)
 		cond_node_destroy(&p->cond_list[i]);
 	kfree(p->cond_list);
+	p->cond_list = NULL;
+	p->cond_list_len = 0;
 }
 
 void cond_policydb_destroy(struct policydb *p)
@@ -440,7 +442,6 @@ int cond_read_list(struct policydb *p, v
 	return 0;
 err:
 	cond_list_destroy(p);
-	p->cond_list = NULL;
 	return rc;
 }
 

[PATCH 5.10 02/74] audit: improve audit queue handling when "audit=1" on cmdline

[Greg Kroah-Hartman]

From: Paul Moore <paul@paul-moore.com>

commit f26d04331360d42dbd6b58448bd98e4edbfbe1c5 upstream.

When an admin enables audit at early boot via the "audit=1" kernel
command line the audit queue behavior is slightly different; the
audit subsystem goes to greater lengths to avoid dropping records,
which unfortunately can result in problems when the audit daemon is
forcibly stopped for an extended period of time.

This patch makes a number of changes designed to improve the audit
queuing behavior so that leaving the audit daemon in a stopped state
for an extended period does not cause a significant impact to the
system.

- kauditd_send_queue() is now limited to looping through the
  passed queue only once per call.  This not only prevents the
  function from looping indefinitely when records are returned
  to the current queue, it also allows any recovery handling in
  kauditd_thread() to take place when kauditd_send_queue()
  returns.

- Transient netlink send errors seen as -EAGAIN now cause the
  record to be returned to the retry queue instead of going to
  the hold queue.  The intention of the hold queue is to store,
  perhaps for an extended period of time, the events which led
  up to the audit daemon going offline.  The retry queue remains
  a temporary queue intended to protect against transient issues
  between the kernel and the audit daemon.

- The retry queue is now limited by the audit_backlog_limit
  setting, the same as the other queues.  This allows admins
  to bound the size of all of the audit queues on the system.

- kauditd_rehold_skb() now returns records to the end of the
  hold queue to ensure ordering is preserved in the face of
  recent changes to kauditd_send_queue().

Cc: stable@vger.kernel.org
Fixes: 5b52330bbfe63 ("audit: fix auditd/kernel connection state tracking")
Fixes: f4b3ee3c85551 ("audit: improve robustness of the audit queue handling")
Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/audit.c |   62 +++++++++++++++++++++++++++++++++++++++------------------
 1 file changed, 43 insertions(+), 19 deletions(-)

--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -541,20 +541,22 @@ static void kauditd_printk_skb(struct sk
 /**
  * kauditd_rehold_skb - Handle a audit record send failure in the hold queue
  * @skb: audit record
+ * @error: error code (unused)
  *
  * Description:
  * This should only be used by the kauditd_thread when it fails to flush the
  * hold queue.
  */
-static void kauditd_rehold_skb(struct sk_buff *skb)
+static void kauditd_rehold_skb(struct sk_buff *skb, __always_unused int error)
 {
-	/* put the record back in the queue at the same place */
-	skb_queue_head(&audit_hold_queue, skb);
+	/* put the record back in the queue */
+	skb_queue_tail(&audit_hold_queue, skb);
 }
 
 /**
  * kauditd_hold_skb - Queue an audit record, waiting for auditd
  * @skb: audit record
+ * @error: error code
  *
  * Description:
  * Queue the audit record, waiting for an instance of auditd.  When this
@@ -564,19 +566,31 @@ static void kauditd_rehold_skb(struct sk
  * and queue it, if we have room.  If we want to hold on to the record, but we
  * don't have room, record a record lost message.
  */
-static void kauditd_hold_skb(struct sk_buff *skb)
+static void kauditd_hold_skb(struct sk_buff *skb, int error)
 {
 	/* at this point it is uncertain if we will ever send this to auditd so
 	 * try to send the message via printk before we go any further */
 	kauditd_printk_skb(skb);
 
 	/* can we just silently drop the message? */
-	if (!audit_default) {
-		kfree_skb(skb);
-		return;
+	if (!audit_default)
+		goto drop;
+
+	/* the hold queue is only for when the daemon goes away completely,
+	 * not -EAGAIN failures; if we are in a -EAGAIN state requeue the
+	 * record on the retry queue unless it's full, in which case drop it
+	 */
+	if (error == -EAGAIN) {
+		if (!audit_backlog_limit ||
+		    skb_queue_len(&audit_retry_queue) < audit_backlog_limit) {
+			skb_queue_tail(&audit_retry_queue, skb);
+			return;
+		}
+		audit_log_lost("kauditd retry queue overflow");
+		goto drop;
 	}
 
-	/* if we have room, queue the message */
+	/* if we have room in the hold queue, queue the message */
 	if (!audit_backlog_limit ||
 	    skb_queue_len(&audit_hold_queue) < audit_backlog_limit) {
 		skb_queue_tail(&audit_hold_queue, skb);
@@ -585,24 +599,32 @@ static void kauditd_hold_skb(struct sk_b
 
 	/* we have no other options - drop the message */
 	audit_log_lost("kauditd hold queue overflow");
+drop:
 	kfree_skb(skb);
 }
 
 /**
  * kauditd_retry_skb - Queue an audit record, attempt to send again to auditd
  * @skb: audit record
+ * @error: error code (unused)
  *
  * Description:
  * Not as serious as kauditd_hold_skb() as we still have a connected auditd,
  * but for some reason we are having problems sending it audit records so
  * queue the given record and attempt to resend.
  */
-static void kauditd_retry_skb(struct sk_buff *skb)
+static void kauditd_retry_skb(struct sk_buff *skb, __always_unused int error)
 {
-	/* NOTE: because records should only live in the retry queue for a
-	 * short period of time, before either being sent or moved to the hold
-	 * queue, we don't currently enforce a limit on this queue */
-	skb_queue_tail(&audit_retry_queue, skb);
+	if (!audit_backlog_limit ||
+	    skb_queue_len(&audit_retry_queue) < audit_backlog_limit) {
+		skb_queue_tail(&audit_retry_queue, skb);
+		return;
+	}
+
+	/* we have to drop the record, send it via printk as a last effort */
+	kauditd_printk_skb(skb);
+	audit_log_lost("kauditd retry queue overflow");
+	kfree_skb(skb);
 }
 
 /**
@@ -640,7 +662,7 @@ static void auditd_reset(const struct au
 	/* flush the retry queue to the hold queue, but don't touch the main
 	 * queue since we need to process that normally for multicast */
 	while ((skb = skb_dequeue(&audit_retry_queue)))
-		kauditd_hold_skb(skb);
+		kauditd_hold_skb(skb, -ECONNREFUSED);
 }
 
 /**
@@ -714,16 +736,18 @@ static int kauditd_send_queue(struct soc
 			      struct sk_buff_head *queue,
 			      unsigned int retry_limit,
 			      void (*skb_hook)(struct sk_buff *skb),
-			      void (*err_hook)(struct sk_buff *skb))
+			      void (*err_hook)(struct sk_buff *skb, int error))
 {
 	int rc = 0;
-	struct sk_buff *skb;
+	struct sk_buff *skb = NULL;
+	struct sk_buff *skb_tail;
 	unsigned int failed = 0;
 
 	/* NOTE: kauditd_thread takes care of all our locking, we just use
 	 *       the netlink info passed to us (e.g. sk and portid) */
 
-	while ((skb = skb_dequeue(queue))) {
+	skb_tail = skb_peek_tail(queue);
+	while ((skb != skb_tail) && (skb = skb_dequeue(queue))) {
 		/* call the skb_hook for each skb we touch */
 		if (skb_hook)
 			(*skb_hook)(skb);
@@ -731,7 +755,7 @@ static int kauditd_send_queue(struct soc
 		/* can we send to anyone via unicast? */
 		if (!sk) {
 			if (err_hook)
-				(*err_hook)(skb);
+				(*err_hook)(skb, -ECONNREFUSED);
 			continue;
 		}
 
@@ -745,7 +769,7 @@ retry:
 			    rc == -ECONNREFUSED || rc == -EPERM) {
 				sk = NULL;
 				if (err_hook)
-					(*err_hook)(skb);
+					(*err_hook)(skb, rc);
 				if (rc == -EAGAIN)
 					rc = 0;
 				/* continue to drain the queue */

[PATCH 5.10 03/74] ASoC: ops: Reject out of bounds values in snd_soc_put_volsw()

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

commit 817f7c9335ec01e0f5e8caffc4f1dcd5e458a4c0 upstream.

We don't currently validate that the values being set are within the range
we advertised to userspace as being valid, do so and reject any values
that are out of range.

Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220124153253.3548853-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/soc-ops.c |   18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -316,13 +316,27 @@ int snd_soc_put_volsw(struct snd_kcontro
 	if (sign_bit)
 		mask = BIT(sign_bit + 1) - 1;
 
-	val = ((ucontrol->value.integer.value[0] + min) & mask);
+	val = ucontrol->value.integer.value[0];
+	if (mc->platform_max && val > mc->platform_max)
+		return -EINVAL;
+	if (val > max - min)
+		return -EINVAL;
+	if (val < 0)
+		return -EINVAL;
+	val = (val + min) & mask;
 	if (invert)
 		val = max - val;
 	val_mask = mask << shift;
 	val = val << shift;
 	if (snd_soc_volsw_is_stereo(mc)) {
-		val2 = ((ucontrol->value.integer.value[1] + min) & mask);
+		val2 = ucontrol->value.integer.value[1];
+		if (mc->platform_max && val2 > mc->platform_max)
+			return -EINVAL;
+		if (val2 > max - min)
+			return -EINVAL;
+		if (val2 < 0)
+			return -EINVAL;
+		val2 = (val2 + min) & mask;
 		if (invert)
 			val2 = max - val2;
 		if (reg == reg2) {

[PATCH 5.10 04/74] ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx()

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

commit 4f1e50d6a9cf9c1b8c859d449b5031cacfa8404e upstream.

We don't currently validate that the values being set are within the range
we advertised to userspace as being valid, do so and reject any values
that are out of range.

Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220124153253.3548853-3-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/soc-ops.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -423,8 +423,15 @@ int snd_soc_put_volsw_sx(struct snd_kcon
 	int err = 0;
 	unsigned int val, val_mask, val2 = 0;
 
+	val = ucontrol->value.integer.value[0];
+	if (mc->platform_max && val > mc->platform_max)
+		return -EINVAL;
+	if (val > max - min)
+		return -EINVAL;
+	if (val < 0)
+		return -EINVAL;
 	val_mask = mask << shift;
-	val = (ucontrol->value.integer.value[0] + min) & mask;
+	val = (val + min) & mask;
 	val = val << shift;
 
 	err = snd_soc_component_update_bits(component, reg, val_mask, val);

[PATCH 5.10 05/74] ASoC: ops: Reject out of bounds values in snd_soc_put_xr_sx()

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

commit 4cf28e9ae6e2e11a044be1bcbcfa1b0d8675fe4d upstream.

We don't currently validate that the values being set are within the range
we advertised to userspace as being valid, do so and reject any values
that are out of range.

Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220124153253.3548853-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/soc-ops.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -880,6 +880,8 @@ int snd_soc_put_xr_sx(struct snd_kcontro
 	unsigned int i, regval, regmask;
 	int err;
 
+	if (val < mc->min || val > mc->max)
+		return -EINVAL;
 	if (invert)
 		val = max - val;
 	val &= mask;

[PATCH 5.10 06/74] ALSA: usb-audio: Correct quirk for VF0770

[Greg Kroah-Hartman]

From: Jonas Hahnfeld <hahnjo@hahnjo.de>

commit 4ee02e20893d2f9e951c7888f2284fa608ddaa35 upstream.

This device provides both audio and video. The original quirk added in
commit 48827e1d6af5 ("ALSA: usb-audio: Add quirk for VF0770") used
USB_DEVICE to match the vendor and product ID. Depending on module order,
if snd-usb-audio was asked first, it would match the entire device and
uvcvideo wouldn't get to see it. Change the matching to USB_AUDIO_DEVICE
to restore uvcvideo matching in all cases.

Fixes: 48827e1d6af5 ("ALSA: usb-audio: Add quirk for VF0770")
Reported-by: Jukka Heikintalo <heikintalo.jukka@gmail.com>
Tested-by: Jukka Heikintalo <heikintalo.jukka@gmail.com>
Reported-by: Paweł Susicki <pawel.susicki@gmail.com>
Tested-by: Paweł Susicki <pawel.susicki@gmail.com>
Cc: <stable@vger.kernel.org> # 5.4, 5.10, 5.14, 5.15
Signed-off-by: Jonas Hahnfeld <hahnjo@hahnjo.de>
Link: https://lore.kernel.org/r/20220131183516.61191-1-hahnjo@hahnjo.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/quirks-table.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -84,7 +84,7 @@
  * combination.
  */
 {
-	USB_DEVICE(0x041e, 0x4095),
+	USB_AUDIO_DEVICE(0x041e, 0x4095),
 	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
 		.ifnum = QUIRK_ANY_INTERFACE,
 		.type = QUIRK_COMPOSITE,

[PATCH 5.10 07/74] ALSA: hda: Fix UAF of leds class devs at unbinding

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 549f8ffc7b2f7561bea7f90930b6c5104318e87b upstream.

The LED class devices that are created by HD-audio codec drivers are
registered via devm_led_classdev_register() and associated with the
HD-audio codec device.  Unfortunately, it turned out that the devres
release doesn't work for this case; namely, since the codec resource
release happens before the devm call chain, it triggers a NULL
dereference or a UAF for a stale set_brightness_delay callback.

For fixing the bug, this patch changes the LED class device register
and unregister in a manual manner without devres, keeping the
instances in hda_gen_spec.

Reported-by: Alexander Sergeyev <sergeev917@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220111195229.a77wrpjclqwrx4bx@localhost.localdomain
Link: https://lore.kernel.org/r/20220126145011.16728-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/hda_generic.c |   17 +++++++++++++++--
 sound/pci/hda/hda_generic.h |    3 +++
 2 files changed, 18 insertions(+), 2 deletions(-)

--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -91,6 +91,12 @@ static void snd_hda_gen_spec_free(struct
 	free_kctls(spec);
 	snd_array_free(&spec->paths);
 	snd_array_free(&spec->loopback_list);
+#ifdef CONFIG_SND_HDA_GENERIC_LEDS
+	if (spec->led_cdevs[LED_AUDIO_MUTE])
+		led_classdev_unregister(spec->led_cdevs[LED_AUDIO_MUTE]);
+	if (spec->led_cdevs[LED_AUDIO_MICMUTE])
+		led_classdev_unregister(spec->led_cdevs[LED_AUDIO_MICMUTE]);
+#endif
 }
 
 /*
@@ -3911,7 +3917,10 @@ static int create_mute_led_cdev(struct h
 						enum led_brightness),
 				bool micmute)
 {
+	struct hda_gen_spec *spec = codec->spec;
 	struct led_classdev *cdev;
+	int idx = micmute ? LED_AUDIO_MICMUTE : LED_AUDIO_MUTE;
+	int err;
 
 	cdev = devm_kzalloc(&codec->core.dev, sizeof(*cdev), GFP_KERNEL);
 	if (!cdev)
@@ -3921,10 +3930,14 @@ static int create_mute_led_cdev(struct h
 	cdev->max_brightness = 1;
 	cdev->default_trigger = micmute ? "audio-micmute" : "audio-mute";
 	cdev->brightness_set_blocking = callback;
-	cdev->brightness = ledtrig_audio_get(micmute ? LED_AUDIO_MICMUTE : LED_AUDIO_MUTE);
+	cdev->brightness = ledtrig_audio_get(idx);
 	cdev->flags = LED_CORE_SUSPENDRESUME;
 
-	return devm_led_classdev_register(&codec->core.dev, cdev);
+	err = led_classdev_register(&codec->core.dev, cdev);
+	if (err < 0)
+		return err;
+	spec->led_cdevs[idx] = cdev;
+	return 0;
 }
 
 static void vmaster_update_mute_led(void *private_data, int enabled)
--- a/sound/pci/hda/hda_generic.h
+++ b/sound/pci/hda/hda_generic.h
@@ -305,6 +305,9 @@ struct hda_gen_spec {
 				   struct hda_jack_callback *cb);
 	void (*mic_autoswitch_hook)(struct hda_codec *codec,
 				    struct hda_jack_callback *cb);
+
+	/* leds */
+	struct led_classdev *led_cdevs[NUM_AUDIO_LEDS];
 };
 
 /* values for add_stereo_mix_input flag */

[PATCH 5.10 08/74] ALSA: hda: realtek: Fix race at concurrent COEF updates

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit b837a9f5ab3bdfab9233c9f98a6bef717673a3e5 upstream.

The COEF access is done with two steps: setting the index then read or
write the data.  When multiple COEF accesses are performed
concurrently, the index and data might be paired unexpectedly.
In most cases, this isn't a big problem as the COEF setup is done at
the initialization, but some dynamic changes like the mute LED may hit
such a race.

For avoiding the racy COEF accesses, this patch introduces a new
mutex coef_mutex to alc_spec, and wrap the COEF accessing functions
with it.

Reported-by: Alexander Sergeyev <sergeev917@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220111195229.a77wrpjclqwrx4bx@localhost.localdomain
Link: https://lore.kernel.org/r/20220131075738.24323-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   61 ++++++++++++++++++++++++++++++++++--------
 1 file changed, 50 insertions(+), 11 deletions(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -97,6 +97,7 @@ struct alc_spec {
 	unsigned int gpio_mic_led_mask;
 	struct alc_coef_led mute_led_coef;
 	struct alc_coef_led mic_led_coef;
+	struct mutex coef_mutex;
 
 	hda_nid_t headset_mic_pin;
 	hda_nid_t headphone_mic_pin;
@@ -133,8 +134,8 @@ struct alc_spec {
  * COEF access helper functions
  */
 
-static int alc_read_coefex_idx(struct hda_codec *codec, hda_nid_t nid,
-			       unsigned int coef_idx)
+static int __alc_read_coefex_idx(struct hda_codec *codec, hda_nid_t nid,
+				 unsigned int coef_idx)
 {
 	unsigned int val;
 
@@ -143,28 +144,61 @@ static int alc_read_coefex_idx(struct hd
 	return val;
 }
 
+static int alc_read_coefex_idx(struct hda_codec *codec, hda_nid_t nid,
+			       unsigned int coef_idx)
+{
+	struct alc_spec *spec = codec->spec;
+	unsigned int val;
+
+	mutex_lock(&spec->coef_mutex);
+	val = __alc_read_coefex_idx(codec, nid, coef_idx);
+	mutex_unlock(&spec->coef_mutex);
+	return val;
+}
+
 #define alc_read_coef_idx(codec, coef_idx) \
 	alc_read_coefex_idx(codec, 0x20, coef_idx)
 
-static void alc_write_coefex_idx(struct hda_codec *codec, hda_nid_t nid,
-				 unsigned int coef_idx, unsigned int coef_val)
+static void __alc_write_coefex_idx(struct hda_codec *codec, hda_nid_t nid,
+				   unsigned int coef_idx, unsigned int coef_val)
 {
 	snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_COEF_INDEX, coef_idx);
 	snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PROC_COEF, coef_val);
 }
 
+static void alc_write_coefex_idx(struct hda_codec *codec, hda_nid_t nid,
+				 unsigned int coef_idx, unsigned int coef_val)
+{
+	struct alc_spec *spec = codec->spec;
+
+	mutex_lock(&spec->coef_mutex);
+	__alc_write_coefex_idx(codec, nid, coef_idx, coef_val);
+	mutex_unlock(&spec->coef_mutex);
+}
+
 #define alc_write_coef_idx(codec, coef_idx, coef_val) \
 	alc_write_coefex_idx(codec, 0x20, coef_idx, coef_val)
 
+static void __alc_update_coefex_idx(struct hda_codec *codec, hda_nid_t nid,
+				    unsigned int coef_idx, unsigned int mask,
+				    unsigned int bits_set)
+{
+	unsigned int val = __alc_read_coefex_idx(codec, nid, coef_idx);
+
+	if (val != -1)
+		__alc_write_coefex_idx(codec, nid, coef_idx,
+				       (val & ~mask) | bits_set);
+}
+
 static void alc_update_coefex_idx(struct hda_codec *codec, hda_nid_t nid,
 				  unsigned int coef_idx, unsigned int mask,
 				  unsigned int bits_set)
 {
-	unsigned int val = alc_read_coefex_idx(codec, nid, coef_idx);
+	struct alc_spec *spec = codec->spec;
 
-	if (val != -1)
-		alc_write_coefex_idx(codec, nid, coef_idx,
-				     (val & ~mask) | bits_set);
+	mutex_lock(&spec->coef_mutex);
+	__alc_update_coefex_idx(codec, nid, coef_idx, mask, bits_set);
+	mutex_unlock(&spec->coef_mutex);
 }
 
 #define alc_update_coef_idx(codec, coef_idx, mask, bits_set)	\
@@ -197,13 +231,17 @@ struct coef_fw {
 static void alc_process_coef_fw(struct hda_codec *codec,
 				const struct coef_fw *fw)
 {
+	struct alc_spec *spec = codec->spec;
+
+	mutex_lock(&spec->coef_mutex);
 	for (; fw->nid; fw++) {
 		if (fw->mask == (unsigned short)-1)
-			alc_write_coefex_idx(codec, fw->nid, fw->idx, fw->val);
+			__alc_write_coefex_idx(codec, fw->nid, fw->idx, fw->val);
 		else
-			alc_update_coefex_idx(codec, fw->nid, fw->idx,
-					      fw->mask, fw->val);
+			__alc_update_coefex_idx(codec, fw->nid, fw->idx,
+						fw->mask, fw->val);
 	}
+	mutex_unlock(&spec->coef_mutex);
 }
 
 /*
@@ -1160,6 +1198,7 @@ static int alc_alloc_spec(struct hda_cod
 	codec->spdif_status_reset = 1;
 	codec->forced_resume = 1;
 	codec->patch_ops = alc_patch_ops;
+	mutex_init(&spec->coef_mutex);
 
 	err = alc_codec_rename_from_preset(codec);
 	if (err < 0) {

[PATCH 5.10 09/74] ALSA: hda/realtek: Add quirk for ASUS GU603

[Greg Kroah-Hartman]

From: Albert Geantă <albertgeanta@gmail.com>

commit 94db9cc8f8fa2d5426ce79ec4ca16028f7084224 upstream.

The ASUS GU603 (Zephyrus M16 - SSID 1043:16b2) requires a quirk similar to
other ASUS devices for correctly routing the 4 integrated speakers. This
fixes it by adding a corresponding quirk entry, which connects the bass
speakers to the proper DAC.

Signed-off-by: Albert Geantă <albertgeanta@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220131010523.546386-1-albertgeanta@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8789,6 +8789,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS),
 	SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401),
+	SND_PCI_QUIRK(0x1043, 0x16b2, "ASUS GU603", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2),
 	SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC),
 	SND_PCI_QUIRK(0x1043, 0x834a, "ASUS S101", ALC269_FIXUP_STEREO_DMIC),

[PATCH 5.10 10/74] ALSA: hda/realtek: Add missing fixup-model entry for Gigabyte X570 ALC1220 quirks

[Greg Kroah-Hartman]

From: Christian Lachner <gladiac@gmail.com>

commit 63394a16086fc2152869d7902621e2525e14bc40 upstream.

The initial commit of the new Gigabyte X570 ALC1220 quirks lacked the
fixup-model entry in alc882_fixup_models[]. It seemed not to cause any ill
effects but for completeness sake this commit makes up for that.

Signed-off-by: Christian Lachner <gladiac@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220129113243.93068-2-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2672,6 +2672,7 @@ static const struct hda_model_fixup alc8
 	{.id = ALC882_FIXUP_NO_PRIMARY_HP, .name = "no-primary-hp"},
 	{.id = ALC887_FIXUP_ASUS_BASS, .name = "asus-bass"},
 	{.id = ALC1220_FIXUP_GB_DUAL_CODECS, .name = "dual-codecs"},
+	{.id = ALC1220_FIXUP_GB_X570, .name = "gb-x570"},
 	{.id = ALC1220_FIXUP_CLEVO_P950, .name = "clevo-p950"},
 	{}
 };

[PATCH 5.10 11/74] ALSA: hda/realtek: Fix silent output on Gigabyte X570S Aorus Master (newer chipset)

[Greg Kroah-Hartman]

From: Christian Lachner <gladiac@gmail.com>

commit 41a8601302ecbe704ac970552c33dc942300fc37 upstream.

Newer versions of the X570 Master come with a newer revision of the
mainboard chipset - the X570S. These boards have the same ALC1220 codec
but seem to initialize the codec with a different parameter in Coef 0x7
which causes the output audio to be very low. We therefore write a
known-good value to Coef 0x7 to fix that. As the value is the exact same
as on the other X570(non-S) boards the same quirk-function can be shared
between both generations.

This commit adds the Gigabyte X570S Aorus Master to the list of boards
using the ALC1220_FIXUP_GB_X570 quirk. This fixes both, the silent output
and the no-audio after reboot from windows problems.

This work has been tested by the folks over at the level1techs forum here:
https://forum.level1techs.com/t/has-anybody-gotten-audio-working-in-linux-on-aorus-x570-master/154072

Signed-off-by: Christian Lachner <gladiac@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220129113243.93068-3-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2171,6 +2171,7 @@ static void alc1220_fixup_gb_x570(struct
 {
 	static const hda_nid_t conn1[] = { 0x0c };
 	static const struct coef_fw gb_x570_coefs[] = {
+		WRITE_COEF(0x07, 0x03c0),
 		WRITE_COEF(0x1a, 0x01c1),
 		WRITE_COEF(0x1b, 0x0202),
 		WRITE_COEF(0x43, 0x3005),
@@ -2598,6 +2599,7 @@ static const struct snd_pci_quirk alc882
 	SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS),
 	SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_GB_X570),
 	SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_CLEVO_P950),
+	SND_PCI_QUIRK(0x1458, 0xa0d5, "Gigabyte X570S Aorus Master", ALC1220_FIXUP_GB_X570),
 	SND_PCI_QUIRK(0x1462, 0x11f7, "MSI-GE63", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1229, "MSI-GP73", ALC1220_FIXUP_CLEVO_P950),

[PATCH 5.10 12/74] ALSA: hda/realtek: Fix silent output on Gigabyte X570 Aorus Xtreme after reboot from Windows

[Greg Kroah-Hartman]

From: Christian Lachner <gladiac@gmail.com>

commit ea3541961376f733373839cc90493aafa8a7f733 upstream.

This commit switches the Gigabyte X570 Aorus Xtreme from using the
ALC1220_FIXUP_CLEVO_P950 to the ALC1220_FIXUP_GB_X570 quirk. This fixes
the no-audio after reboot from windows problem.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220129113243.93068-4-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2598,7 +2598,7 @@ static const struct snd_pci_quirk alc882
 	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte EP45-DS3/Z87X-UD3H", ALC889_FIXUP_FRONT_HP_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS),
 	SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_GB_X570),
-	SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_CLEVO_P950),
+	SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_GB_X570),
 	SND_PCI_QUIRK(0x1458, 0xa0d5, "Gigabyte X570S Aorus Master", ALC1220_FIXUP_GB_X570),
 	SND_PCI_QUIRK(0x1462, 0x11f7, "MSI-GE63", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950),

[PATCH 5.10 13/74] btrfs: fix deadlock between quota disable and qgroup rescan worker

[Greg Kroah-Hartman]

From: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>

commit e804861bd4e69cc5fe1053eedcb024982dde8e48 upstream.

Quota disable ioctl starts a transaction before waiting for the qgroup
rescan worker completes. However, this wait can be infinite and results
in deadlock because of circular dependency among the quota disable
ioctl, the qgroup rescan worker and the other task with transaction such
as block group relocation task.

The deadlock happens with the steps following:

1) Task A calls ioctl to disable quota. It starts a transaction and
   waits for qgroup rescan worker completes.
2) Task B such as block group relocation task starts a transaction and
   joins to the transaction that task A started. Then task B commits to
   the transaction. In this commit, task B waits for a commit by task A.
3) Task C as the qgroup rescan worker starts its job and starts a
   transaction. In this transaction start, task C waits for completion
   of the transaction that task A started and task B committed.

This deadlock was found with fstests test case btrfs/115 and a zoned
null_blk device. The test case enables and disables quota, and the
block group reclaim was triggered during the quota disable by chance.
The deadlock was also observed by running quota enable and disable in
parallel with 'btrfs balance' command on regular null_blk devices.

An example report of the deadlock:

  [372.469894] INFO: task kworker/u16:6:103 blocked for more than 122 seconds.
  [372.479944]       Not tainted 5.16.0-rc8 #7
  [372.485067] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [372.493898] task:kworker/u16:6   state:D stack:    0 pid:  103 ppid:     2 flags:0x00004000
  [372.503285] Workqueue: btrfs-qgroup-rescan btrfs_work_helper [btrfs]
  [372.510782] Call Trace:
  [372.514092]  <TASK>
  [372.521684]  __schedule+0xb56/0x4850
  [372.530104]  ? io_schedule_timeout+0x190/0x190
  [372.538842]  ? lockdep_hardirqs_on+0x7e/0x100
  [372.547092]  ? _raw_spin_unlock_irqrestore+0x3e/0x60
  [372.555591]  schedule+0xe0/0x270
  [372.561894]  btrfs_commit_transaction+0x18bb/0x2610 [btrfs]
  [372.570506]  ? btrfs_apply_pending_changes+0x50/0x50 [btrfs]
  [372.578875]  ? free_unref_page+0x3f2/0x650
  [372.585484]  ? finish_wait+0x270/0x270
  [372.591594]  ? release_extent_buffer+0x224/0x420 [btrfs]
  [372.599264]  btrfs_qgroup_rescan_worker+0xc13/0x10c0 [btrfs]
  [372.607157]  ? lock_release+0x3a9/0x6d0
  [372.613054]  ? btrfs_qgroup_account_extent+0xda0/0xda0 [btrfs]
  [372.620960]  ? do_raw_spin_lock+0x11e/0x250
  [372.627137]  ? rwlock_bug.part.0+0x90/0x90
  [372.633215]  ? lock_is_held_type+0xe4/0x140
  [372.639404]  btrfs_work_helper+0x1ae/0xa90 [btrfs]
  [372.646268]  process_one_work+0x7e9/0x1320
  [372.652321]  ? lock_release+0x6d0/0x6d0
  [372.658081]  ? pwq_dec_nr_in_flight+0x230/0x230
  [372.664513]  ? rwlock_bug.part.0+0x90/0x90
  [372.670529]  worker_thread+0x59e/0xf90
  [372.676172]  ? process_one_work+0x1320/0x1320
  [372.682440]  kthread+0x3b9/0x490
  [372.687550]  ? _raw_spin_unlock_irq+0x24/0x50
  [372.693811]  ? set_kthread_struct+0x100/0x100
  [372.700052]  ret_from_fork+0x22/0x30
  [372.705517]  </TASK>
  [372.709747] INFO: task btrfs-transacti:2347 blocked for more than 123 seconds.
  [372.729827]       Not tainted 5.16.0-rc8 #7
  [372.745907] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [372.767106] task:btrfs-transacti state:D stack:    0 pid: 2347 ppid:     2 flags:0x00004000
  [372.787776] Call Trace:
  [372.801652]  <TASK>
  [372.812961]  __schedule+0xb56/0x4850
  [372.830011]  ? io_schedule_timeout+0x190/0x190
  [372.852547]  ? lockdep_hardirqs_on+0x7e/0x100
  [372.871761]  ? _raw_spin_unlock_irqrestore+0x3e/0x60
  [372.886792]  schedule+0xe0/0x270
  [372.901685]  wait_current_trans+0x22c/0x310 [btrfs]
  [372.919743]  ? btrfs_put_transaction+0x3d0/0x3d0 [btrfs]
  [372.938923]  ? finish_wait+0x270/0x270
  [372.959085]  ? join_transaction+0xc75/0xe30 [btrfs]
  [372.977706]  start_transaction+0x938/0x10a0 [btrfs]
  [372.997168]  transaction_kthread+0x19d/0x3c0 [btrfs]
  [373.013021]  ? btrfs_cleanup_transaction.isra.0+0xfc0/0xfc0 [btrfs]
  [373.031678]  kthread+0x3b9/0x490
  [373.047420]  ? _raw_spin_unlock_irq+0x24/0x50
  [373.064645]  ? set_kthread_struct+0x100/0x100
  [373.078571]  ret_from_fork+0x22/0x30
  [373.091197]  </TASK>
  [373.105611] INFO: task btrfs:3145 blocked for more than 123 seconds.
  [373.114147]       Not tainted 5.16.0-rc8 #7
  [373.120401] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [373.130393] task:btrfs           state:D stack:    0 pid: 3145 ppid:  3141 flags:0x00004000
  [373.140998] Call Trace:
  [373.145501]  <TASK>
  [373.149654]  __schedule+0xb56/0x4850
  [373.155306]  ? io_schedule_timeout+0x190/0x190
  [373.161965]  ? lockdep_hardirqs_on+0x7e/0x100
  [373.168469]  ? _raw_spin_unlock_irqrestore+0x3e/0x60
  [373.175468]  schedule+0xe0/0x270
  [373.180814]  wait_for_commit+0x104/0x150 [btrfs]
  [373.187643]  ? test_and_set_bit+0x20/0x20 [btrfs]
  [373.194772]  ? kmem_cache_free+0x124/0x550
  [373.201191]  ? btrfs_put_transaction+0x69/0x3d0 [btrfs]
  [373.208738]  ? finish_wait+0x270/0x270
  [373.214704]  ? __btrfs_end_transaction+0x347/0x7b0 [btrfs]
  [373.222342]  btrfs_commit_transaction+0x44d/0x2610 [btrfs]
  [373.230233]  ? join_transaction+0x255/0xe30 [btrfs]
  [373.237334]  ? btrfs_record_root_in_trans+0x4d/0x170 [btrfs]
  [373.245251]  ? btrfs_apply_pending_changes+0x50/0x50 [btrfs]
  [373.253296]  relocate_block_group+0x105/0xc20 [btrfs]
  [373.260533]  ? mutex_lock_io_nested+0x1270/0x1270
  [373.267516]  ? btrfs_wait_nocow_writers+0x85/0x180 [btrfs]
  [373.275155]  ? merge_reloc_roots+0x710/0x710 [btrfs]
  [373.283602]  ? btrfs_wait_ordered_extents+0xd30/0xd30 [btrfs]
  [373.291934]  ? kmem_cache_free+0x124/0x550
  [373.298180]  btrfs_relocate_block_group+0x35c/0x930 [btrfs]
  [373.306047]  btrfs_relocate_chunk+0x85/0x210 [btrfs]
  [373.313229]  btrfs_balance+0x12f4/0x2d20 [btrfs]
  [373.320227]  ? lock_release+0x3a9/0x6d0
  [373.326206]  ? btrfs_relocate_chunk+0x210/0x210 [btrfs]
  [373.333591]  ? lock_is_held_type+0xe4/0x140
  [373.340031]  ? rcu_read_lock_sched_held+0x3f/0x70
  [373.346910]  btrfs_ioctl_balance+0x548/0x700 [btrfs]
  [373.354207]  btrfs_ioctl+0x7f2/0x71b0 [btrfs]
  [373.360774]  ? lockdep_hardirqs_on_prepare+0x410/0x410
  [373.367957]  ? lockdep_hardirqs_on_prepare+0x410/0x410
  [373.375327]  ? btrfs_ioctl_get_supported_features+0x20/0x20 [btrfs]
  [373.383841]  ? find_held_lock+0x2c/0x110
  [373.389993]  ? lock_release+0x3a9/0x6d0
  [373.395828]  ? mntput_no_expire+0xf7/0xad0
  [373.402083]  ? lock_is_held_type+0xe4/0x140
  [373.408249]  ? vfs_fileattr_set+0x9f0/0x9f0
  [373.414486]  ? selinux_file_ioctl+0x349/0x4e0
  [373.420938]  ? trace_raw_output_lock+0xb4/0xe0
  [373.427442]  ? selinux_inode_getsecctx+0x80/0x80
  [373.434224]  ? lockdep_hardirqs_on+0x7e/0x100
  [373.440660]  ? force_qs_rnp+0x2a0/0x6b0
  [373.446534]  ? lock_is_held_type+0x9b/0x140
  [373.452763]  ? __blkcg_punt_bio_submit+0x1b0/0x1b0
  [373.459732]  ? security_file_ioctl+0x50/0x90
  [373.466089]  __x64_sys_ioctl+0x127/0x190
  [373.472022]  do_syscall_64+0x3b/0x90
  [373.477513]  entry_SYSCALL_64_after_hwframe+0x44/0xae
  [373.484823] RIP: 0033:0x7f8f4af7e2bb
  [373.490493] RSP: 002b:00007ffcbf936178 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  [373.500197] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8f4af7e2bb
  [373.509451] RDX: 00007ffcbf936220 RSI: 00000000c4009420 RDI: 0000000000000003
  [373.518659] RBP: 00007ffcbf93774a R08: 0000000000000013 R09: 00007f8f4b02d4e0
  [373.527872] R10: 00007f8f4ae87740 R11: 0000000000000246 R12: 0000000000000001
  [373.537222] R13: 00007ffcbf936220 R14: 0000000000000000 R15: 0000000000000002
  [373.546506]  </TASK>
  [373.550878] INFO: task btrfs:3146 blocked for more than 123 seconds.
  [373.559383]       Not tainted 5.16.0-rc8 #7
  [373.565748] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [373.575748] task:btrfs           state:D stack:    0 pid: 3146 ppid:  2168 flags:0x00000000
  [373.586314] Call Trace:
  [373.590846]  <TASK>
  [373.595121]  __schedule+0xb56/0x4850
  [373.600901]  ? __lock_acquire+0x23db/0x5030
  [373.607176]  ? io_schedule_timeout+0x190/0x190
  [373.613954]  schedule+0xe0/0x270
  [373.619157]  schedule_timeout+0x168/0x220
  [373.625170]  ? usleep_range_state+0x150/0x150
  [373.631653]  ? mark_held_locks+0x9e/0xe0
  [373.637767]  ? do_raw_spin_lock+0x11e/0x250
  [373.643993]  ? lockdep_hardirqs_on_prepare+0x17b/0x410
  [373.651267]  ? _raw_spin_unlock_irq+0x24/0x50
  [373.657677]  ? lockdep_hardirqs_on+0x7e/0x100
  [373.664103]  wait_for_completion+0x163/0x250
  [373.670437]  ? bit_wait_timeout+0x160/0x160
  [373.676585]  btrfs_quota_disable+0x176/0x9a0 [btrfs]
  [373.683979]  ? btrfs_quota_enable+0x12f0/0x12f0 [btrfs]
  [373.691340]  ? down_write+0xd0/0x130
  [373.696880]  ? down_write_killable+0x150/0x150
  [373.703352]  btrfs_ioctl+0x3945/0x71b0 [btrfs]
  [373.710061]  ? find_held_lock+0x2c/0x110
  [373.716192]  ? lock_release+0x3a9/0x6d0
  [373.722047]  ? __handle_mm_fault+0x23cd/0x3050
  [373.728486]  ? btrfs_ioctl_get_supported_features+0x20/0x20 [btrfs]
  [373.737032]  ? set_pte+0x6a/0x90
  [373.742271]  ? do_raw_spin_unlock+0x55/0x1f0
  [373.748506]  ? lock_is_held_type+0xe4/0x140
  [373.754792]  ? vfs_fileattr_set+0x9f0/0x9f0
  [373.761083]  ? selinux_file_ioctl+0x349/0x4e0
  [373.767521]  ? selinux_inode_getsecctx+0x80/0x80
  [373.774247]  ? __up_read+0x182/0x6e0
  [373.780026]  ? count_memcg_events.constprop.0+0x46/0x60
  [373.787281]  ? up_write+0x460/0x460
  [373.792932]  ? security_file_ioctl+0x50/0x90
  [373.799232]  __x64_sys_ioctl+0x127/0x190
  [373.805237]  do_syscall_64+0x3b/0x90
  [373.810947]  entry_SYSCALL_64_after_hwframe+0x44/0xae
  [373.818102] RIP: 0033:0x7f1383ea02bb
  [373.823847] RSP: 002b:00007fffeb4d71f8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
  [373.833641] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1383ea02bb
  [373.842961] RDX: 00007fffeb4d7210 RSI: 00000000c0109428 RDI: 0000000000000003
  [373.852179] RBP: 0000000000000003 R08: 0000000000000003 R09: 0000000000000078
  [373.861408] R10: 00007f1383daec78 R11: 0000000000000202 R12: 00007fffeb4d874a
  [373.870647] R13: 0000000000493099 R14: 0000000000000001 R15: 0000000000000000
  [373.879838]  </TASK>
  [373.884018]
               Showing all locks held in the system:
  [373.894250] 3 locks held by kworker/4:1/58:
  [373.900356] 1 lock held by khungtaskd/63:
  [373.906333]  #0: ffffffff8945ff60 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260
  [373.917307] 3 locks held by kworker/u16:6/103:
  [373.923938]  #0: ffff888127b4f138 ((wq_completion)btrfs-qgroup-rescan){+.+.}-{0:0}, at: process_one_work+0x712/0x1320
  [373.936555]  #1: ffff88810b817dd8 ((work_completion)(&work->normal_work)){+.+.}-{0:0}, at: process_one_work+0x73f/0x1320
  [373.951109]  #2: ffff888102dd4650 (sb_internal#2){.+.+}-{0:0}, at: btrfs_qgroup_rescan_worker+0x1f6/0x10c0 [btrfs]
  [373.964027] 2 locks held by less/1803:
  [373.969982]  #0: ffff88813ed56098 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x24/0x80
  [373.981295]  #1: ffffc90000b3b2e8 (&ldata->atomic_read_lock){+.+.}-{3:3}, at: n_tty_read+0x9e2/0x1060
  [373.992969] 1 lock held by btrfs-transacti/2347:
  [373.999893]  #0: ffff88813d4887a8 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0xe3/0x3c0 [btrfs]
  [374.015872] 3 locks held by btrfs/3145:
  [374.022298]  #0: ffff888102dd4460 (sb_writers#18){.+.+}-{0:0}, at: btrfs_ioctl_balance+0xc3/0x700 [btrfs]
  [374.034456]  #1: ffff88813d48a0a0 (&fs_info->reclaim_bgs_lock){+.+.}-{3:3}, at: btrfs_balance+0xfe5/0x2d20 [btrfs]
  [374.047646]  #2: ffff88813d488838 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_relocate_block_group+0x354/0x930 [btrfs]
  [374.063295] 4 locks held by btrfs/3146:
  [374.069647]  #0: ffff888102dd4460 (sb_writers#18){.+.+}-{0:0}, at: btrfs_ioctl+0x38b1/0x71b0 [btrfs]
  [374.081601]  #1: ffff88813d488bb8 (&fs_info->subvol_sem){+.+.}-{3:3}, at: btrfs_ioctl+0x38fd/0x71b0 [btrfs]
  [374.094283]  #2: ffff888102dd4650 (sb_internal#2){.+.+}-{0:0}, at: btrfs_quota_disable+0xc8/0x9a0 [btrfs]
  [374.106885]  #3: ffff88813d489800 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}, at: btrfs_quota_disable+0xd5/0x9a0 [btrfs]

  [374.126780] =============================================

To avoid the deadlock, wait for the qgroup rescan worker to complete
before starting the transaction for the quota disable ioctl. Clear
BTRFS_FS_QUOTA_ENABLE flag before the wait and the transaction to
request the worker to complete. On transaction start failure, set the
BTRFS_FS_QUOTA_ENABLE flag again. These BTRFS_FS_QUOTA_ENABLE flag
changes can be done safely since the function btrfs_quota_disable is not
called concurrently because of fs_info->subvol_sem.

Also check the BTRFS_FS_QUOTA_ENABLE flag in qgroup_rescan_init to avoid
another qgroup rescan worker to start after the previous qgroup worker
completed.

CC: stable@vger.kernel.org # 5.4+
Suggested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/qgroup.c |   21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -1186,9 +1186,24 @@ int btrfs_quota_disable(struct btrfs_fs_
 	struct btrfs_trans_handle *trans = NULL;
 	int ret = 0;
 
+	/*
+	 * We need to have subvol_sem write locked, to prevent races between
+	 * concurrent tasks trying to disable quotas, because we will unlock
+	 * and relock qgroup_ioctl_lock across BTRFS_FS_QUOTA_ENABLED changes.
+	 */
+	lockdep_assert_held_write(&fs_info->subvol_sem);
+
 	mutex_lock(&fs_info->qgroup_ioctl_lock);
 	if (!fs_info->quota_root)
 		goto out;
+
+	/*
+	 * Request qgroup rescan worker to complete and wait for it. This wait
+	 * must be done before transaction start for quota disable since it may
+	 * deadlock with transaction by the qgroup rescan worker.
+	 */
+	clear_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags);
+	btrfs_qgroup_wait_for_completion(fs_info, false);
 	mutex_unlock(&fs_info->qgroup_ioctl_lock);
 
 	/*
@@ -1206,14 +1221,13 @@ int btrfs_quota_disable(struct btrfs_fs_
 	if (IS_ERR(trans)) {
 		ret = PTR_ERR(trans);
 		trans = NULL;
+		set_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags);
 		goto out;
 	}
 
 	if (!fs_info->quota_root)
 		goto out;
 
-	clear_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags);
-	btrfs_qgroup_wait_for_completion(fs_info, false);
 	spin_lock(&fs_info->qgroup_lock);
 	quota_root = fs_info->quota_root;
 	fs_info->quota_root = NULL;
@@ -3390,6 +3404,9 @@ qgroup_rescan_init(struct btrfs_fs_info
 			btrfs_warn(fs_info,
 			"qgroup rescan init failed, qgroup is not enabled");
 			ret = -EINVAL;
+		} else if (!test_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags)) {
+			/* Quota disable is in progress */
+			ret = -EBUSY;
 		}
 
 		if (ret) {

[PATCH 5.10 14/74] drm/nouveau: fix off by one in BIOS boundary checking

[Greg Kroah-Hartman]

From: Nick Lopez <github@glowingmonkey.org>

commit 1b777d4d9e383d2744fc9b3a09af6ec1893c8b1a upstream.

Bounds checking when parsing init scripts embedded in the BIOS reject
access to the last byte. This causes driver initialization to fail on
Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working
console.

This is probably only seen on OpenFirmware machines like PowerPC Macs
because the BIOS image provided by OF is only the used parts of the ROM,
not a power-of-two blocks read from PCI directly so PCs always have
empty bytes at the end that are never accessed.

Signed-off-by: Nick Lopez <github@glowingmonkey.org>
Fixes: 4d4e9907ff572 ("drm/nouveau/bios: guard against out-of-bounds accesses to image")
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220122081906.2633061-1-github@glowingmonkey.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c
@@ -38,7 +38,7 @@ nvbios_addr(struct nvkm_bios *bios, u32
 		*addr += bios->imaged_addr;
 	}
 
-	if (unlikely(*addr + size >= bios->size)) {
+	if (unlikely(*addr + size > bios->size)) {
 		nvkm_error(&bios->subdev, "OOB %d %08x %08x\n", size, p, *addr);
 		return false;
 	}

[PATCH 5.10 15/74] drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina panels

[Greg Kroah-Hartman]

From: Aun-Ali Zaidi <admin@kodeit.net>

commit 30fbce374745a9c6af93c775a5ac49a97f822fda upstream.

The eDP link rate reported by the DP_MAX_LINK_RATE dpcd register (0xa) is
contradictory to the highest rate supported reported by
EDID (0xc = LINK_RATE_RBR2). The effects of this compounded with commit
'4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")' results
in no display modes being found and a dark panel.

For now, simply force the maximum supported link rate for the eDP attached
2018 15" Apple Retina panels.

Additionally, we must also check the firmware revision since the device ID
reported by the DPCD is identical to that of the more capable 16,1,
incorrectly quirking it. We also use said firmware check to quirk the
refreshed 15,1 models with Vega graphics as they use a slightly newer
firmware version.

Tested-by: Aun-Ali Zaidi <admin@kodeit.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Aun-Ali Zaidi <admin@kodeit.net>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -3587,6 +3587,26 @@ static bool retrieve_link_cap(struct dc_
 		dp_hw_fw_revision.ieee_fw_rev,
 		sizeof(dp_hw_fw_revision.ieee_fw_rev));
 
+	/* Quirk for Apple MBP 2018 15" Retina panels: wrong DP_MAX_LINK_RATE */
+	{
+		uint8_t str_mbp_2018[] = { 101, 68, 21, 103, 98, 97 };
+		uint8_t fwrev_mbp_2018[] = { 7, 4 };
+		uint8_t fwrev_mbp_2018_vega[] = { 8, 4 };
+
+		/* We also check for the firmware revision as 16,1 models have an
+		 * identical device id and are incorrectly quirked otherwise.
+		 */
+		if ((link->dpcd_caps.sink_dev_id == 0x0010fa) &&
+		    !memcmp(link->dpcd_caps.sink_dev_id_str, str_mbp_2018,
+			     sizeof(str_mbp_2018)) &&
+		    (!memcmp(link->dpcd_caps.sink_fw_revision, fwrev_mbp_2018,
+			     sizeof(fwrev_mbp_2018)) ||
+		    !memcmp(link->dpcd_caps.sink_fw_revision, fwrev_mbp_2018_vega,
+			     sizeof(fwrev_mbp_2018_vega)))) {
+			link->reported_link_cap.link_rate = LINK_RATE_RBR2;
+		}
+	}
+
 	memset(&link->dpcd_caps.dsc_caps, '\0',
 			sizeof(link->dpcd_caps.dsc_caps));
 	memset(&link->dpcd_caps.fec_cap, '\0', sizeof(link->dpcd_caps.fec_cap));

[PATCH 5.10 16/74] nvme-fabrics: fix state check in nvmf_ctlr_matches_baseopts()

[Greg Kroah-Hartman]

From: Uday Shankar <ushankar@purestorage.com>

commit 6a51abdeb259a56d95f13cc67e3a0838bcda0377 upstream.

Controller deletion/reset, immediately followed by or concurrent with
a reconnect, is hard failing the connect attempt resulting in a
complete loss of connectivity to the controller.

In the connect request, fabrics looks for an existing controller with
the same address components and aborts the connect if a controller
already exists and the duplicate connect option isn't set. The match
routine filters out controllers that are dead or dying, so they don't
interfere with the new connect request.

When NVME_CTRL_DELETING_NOIO was added, it missed updating the state
filters in the nvmf_ctlr_matches_baseopts() routine. Thus, when in this
new state, it's seen as a live controller and fails the connect request.

Correct by adding the DELETING_NIO state to the match checks.

Fixes: ecca390e8056 ("nvme: fix deadlock in disconnect during scan_work and/or ana_work")
Cc: <stable@vger.kernel.org> # v5.7+
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nvme/host/fabrics.h |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/nvme/host/fabrics.h
+++ b/drivers/nvme/host/fabrics.h
@@ -153,6 +153,7 @@ nvmf_ctlr_matches_baseopts(struct nvme_c
 			struct nvmf_ctrl_options *opts)
 {
 	if (ctrl->state == NVME_CTRL_DELETING ||
+	    ctrl->state == NVME_CTRL_DELETING_NOIO ||
 	    ctrl->state == NVME_CTRL_DEAD ||
 	    strcmp(opts->subsysnqn, ctrl->opts->subsysnqn) ||
 	    strcmp(opts->host->nqn, ctrl->opts->host->nqn) ||

[PATCH 5.10 17/74] mm/debug_vm_pgtable: remove pte entry from the page table

[Greg Kroah-Hartman]

From: Pasha Tatashin <pasha.tatashin@soleen.com>

commit fb5222aae64fe25e5f3ebefde8214dcf3ba33ca5 upstream.

Patch series "page table check fixes and cleanups", v5.

This patch (of 4):

The pte entry that is used in pte_advanced_tests() is never removed from
the page table at the end of the test.

The issue is detected by page_table_check, to repro compile kernel with
the following configs:

CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_PAGE_TABLE_CHECK=y
CONFIG_PAGE_TABLE_CHECK_ENFORCED=y

During the boot the following BUG is printed:

  debug_vm_pgtable: [debug_vm_pgtable         ]: Validating architecture page table helpers
  ------------[ cut here ]------------
  kernel BUG at mm/page_table_check.c:162!
  invalid opcode: 0000 [#1] PREEMPT SMP PTI
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.16.0-11413-g2c271fe77d52 #3
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
  ...

The entry should be properly removed from the page table before the page
is released to the free list.

Link: https://lkml.kernel.org/r/20220131203249.2832273-1-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20220131203249.2832273-2-pasha.tatashin@soleen.com
Fixes: a5c3b9ffb0f4 ("mm/debug_vm_pgtable: add tests validating advanced arch page table helpers")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>	[5.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/debug_vm_pgtable.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/mm/debug_vm_pgtable.c
+++ b/mm/debug_vm_pgtable.c
@@ -128,6 +128,8 @@ static void __init pte_advanced_tests(st
 	ptep_test_and_clear_young(vma, vaddr, ptep);
 	pte = ptep_get(ptep);
 	WARN_ON(pte_young(pte));
+
+	ptep_get_and_clear_full(mm, vaddr, ptep, 1);
 }
 
 static void __init pte_savedwrite_tests(unsigned long pfn, pgprot_t prot)

[PATCH 5.10 18/74] mm/pgtable: define pte_index so that preprocessor could recognize it

[Greg Kroah-Hartman]

From: Mike Rapoport <rppt@linux.ibm.com>

commit 314c459a6fe0957b5885fbc65c53d51444092880 upstream.

Since commit 974b9b2c68f3 ("mm: consolidate pte_index() and
pte_offset_*() definitions") pte_index is a static inline and there is
no define for it that can be recognized by the preprocessor.  As a
result, vm_insert_pages() uses slower loop over vm_insert_page() instead
of insert_pages() that amortizes the cost of spinlock operations when
inserting multiple pages.

Link: https://lkml.kernel.org/r/20220111145457.20748-1-rppt@kernel.org
Fixes: 974b9b2c68f3 ("mm: consolidate pte_index() and pte_offset_*() definitions")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: Christian Dietrich <stettberger@dokucode.de>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/pgtable.h |    1 +
 1 file changed, 1 insertion(+)

--- a/include/linux/pgtable.h
+++ b/include/linux/pgtable.h
@@ -44,6 +44,7 @@ static inline unsigned long pte_index(un
 {
 	return (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1);
 }
+#define pte_index pte_index
 
 #ifndef pmd_index
 static inline unsigned long pmd_index(unsigned long address)

[PATCH 5.10 19/74] mm/kmemleak: avoid scanning potential huge holes

[Greg Kroah-Hartman]

From: Lang Yu <lang.yu@amd.com>

commit c10a0f877fe007021d70f9cada240f42adc2b5db upstream.

When using devm_request_free_mem_region() and devm_memremap_pages() to
add ZONE_DEVICE memory, if requested free mem region's end pfn were
huge(e.g., 0x400000000), the node_end_pfn() will be also huge (see
move_pfn_range_to_zone()).  Thus it creates a huge hole between
node_start_pfn() and node_end_pfn().

We found on some AMD APUs, amdkfd requested such a free mem region and
created a huge hole.  In such a case, following code snippet was just
doing busy test_bit() looping on the huge hole.

  for (pfn = start_pfn; pfn < end_pfn; pfn++) {
	struct page *page = pfn_to_online_page(pfn);
		if (!page)
			continue;
	...
  }

So we got a soft lockup:

  watchdog: BUG: soft lockup - CPU#6 stuck for 26s! [bash:1221]
  CPU: 6 PID: 1221 Comm: bash Not tainted 5.15.0-custom #1
  RIP: 0010:pfn_to_online_page+0x5/0xd0
  Call Trace:
    ? kmemleak_scan+0x16a/0x440
    kmemleak_write+0x306/0x3a0
    ? common_file_perm+0x72/0x170
    full_proxy_write+0x5c/0x90
    vfs_write+0xb9/0x260
    ksys_write+0x67/0xe0
    __x64_sys_write+0x1a/0x20
    do_syscall_64+0x3b/0xc0
    entry_SYSCALL_64_after_hwframe+0x44/0xae

I did some tests with the patch.

(1) amdgpu module unloaded

before the patch:

  real    0m0.976s
  user    0m0.000s
  sys     0m0.968s

after the patch:

  real    0m0.981s
  user    0m0.000s
  sys     0m0.973s

(2) amdgpu module loaded

before the patch:

  real    0m35.365s
  user    0m0.000s
  sys     0m35.354s

after the patch:

  real    0m1.049s
  user    0m0.000s
  sys     0m1.042s

Link: https://lkml.kernel.org/r/20211108140029.721144-1-lang.yu@amd.com
Signed-off-by: Lang Yu <lang.yu@amd.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/kmemleak.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -1401,7 +1401,8 @@ static void kmemleak_scan(void)
 {
 	unsigned long flags;
 	struct kmemleak_object *object;
-	int i;
+	struct zone *zone;
+	int __maybe_unused i;
 	int new_leaks = 0;
 
 	jiffies_last_scan = jiffies;
@@ -1441,9 +1442,9 @@ static void kmemleak_scan(void)
 	 * Struct page scanning for each node.
 	 */
 	get_online_mems();
-	for_each_online_node(i) {
-		unsigned long start_pfn = node_start_pfn(i);
-		unsigned long end_pfn = node_end_pfn(i);
+	for_each_populated_zone(zone) {
+		unsigned long start_pfn = zone->zone_start_pfn;
+		unsigned long end_pfn = zone_end_pfn(zone);
 		unsigned long pfn;
 
 		for (pfn = start_pfn; pfn < end_pfn; pfn++) {
@@ -1452,8 +1453,8 @@ static void kmemleak_scan(void)
 			if (!page)
 				continue;
 
-			/* only scan pages belonging to this node */
-			if (page_to_nid(page) != i)
+			/* only scan pages belonging to this zone */
+			if (page_zone(page) != zone)
 				continue;
 			/* only scan if page is in use */
 			if (page_count(page) == 0)

[PATCH 5.10 20/74] block: bio-integrity: Advance seed correctly for larger interval sizes

[Greg Kroah-Hartman]

From: Martin K. Petersen <martin.petersen@oracle.com>

commit b13e0c71856817fca67159b11abac350e41289f5 upstream.

Commit 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update
integrity seed") added code to update the integrity seed value when
advancing a bio. However, it failed to take into account that the
integrity interval might be larger than the 512-byte block layer
sector size. This broke bio splitting on PI devices with 4KB logical
blocks.

The seed value should be advanced by bio_integrity_intervals() and not
the number of sectors.

Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: stable@vger.kernel.org
Fixes: 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update integrity seed")
Tested-by: Dmitry Ivanov <dmitry.ivanov2@hpe.com>
Reported-by: Alexey Lyashkov <alexey.lyashkov@hpe.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220204034209.4193-1-martin.petersen@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 block/bio-integrity.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/block/bio-integrity.c
+++ b/block/bio-integrity.c
@@ -384,7 +384,7 @@ void bio_integrity_advance(struct bio *b
 	struct blk_integrity *bi = blk_get_integrity(bio->bi_disk);
 	unsigned bytes = bio_integrity_bytes(bi, bytes_done >> 9);
 
-	bip->bip_iter.bi_sector += bytes_done >> 9;
+	bip->bip_iter.bi_sector += bio_integrity_intervals(bi, bytes_done >> 9);
 	bvec_iter_advance(bip->bip_vec, &bip->bip_iter, bytes);
 }
 

[PATCH 5.10 21/74] dma-buf: heaps: Fix potential spectre v1 gadget

[Greg Kroah-Hartman]

From: Jordy Zomer <jordy@pwning.systems>

commit 92c4cfaee6872038563c5b6f2e8e613f9d84d47d upstream.

It appears like nr could be a Spectre v1 gadget as it's supplied by a
user and used as an array index. Prevent the contents
of kernel memory from being leaked to userspace via speculative
execution by using array_index_nospec.

Signed-off-by: Jordy Zomer <jordy@pwning.systems>
Fixes: c02a81fba74f ("dma-buf: Add dma-buf heaps framework")
Cc: <stable@vger.kernel.org> # v5.6+
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
 [sumits: added fixes and cc: stable tags]
Link: https://patchwork.freedesktop.org/patch/msgid/20220129150604.3461652-1-jordy@pwning.systems
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma-buf/dma-heap.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/dma-buf/dma-heap.c
+++ b/drivers/dma-buf/dma-heap.c
@@ -14,6 +14,7 @@
 #include <linux/xarray.h>
 #include <linux/list.h>
 #include <linux/slab.h>
+#include <linux/nospec.h>
 #include <linux/uaccess.h>
 #include <linux/syscalls.h>
 #include <linux/dma-heap.h>
@@ -123,6 +124,7 @@ static long dma_heap_ioctl(struct file *
 	if (nr >= ARRAY_SIZE(dma_heap_ioctl_cmds))
 		return -EINVAL;
 
+	nr = array_index_nospec(nr, ARRAY_SIZE(dma_heap_ioctl_cmds));
 	/* Get the kernel ioctl cmd that matches */
 	kcmd = dma_heap_ioctl_cmds[nr];
 

[PATCH 5.10 22/74] IB/hfi1: Fix AIP early init panic

[Greg Kroah-Hartman]

From: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>

commit 5f8f55b92edd621f056bdf09e572092849fabd83 upstream.

An early failure in hfi1_ipoib_setup_rn() can lead to the following panic:

  BUG: unable to handle kernel NULL pointer dereference at 00000000000001b0
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  Workqueue: events work_for_cpu_fn
  RIP: 0010:try_to_grab_pending+0x2b/0x140
  Code: 1f 44 00 00 41 55 41 54 55 48 89 d5 53 48 89 fb 9c 58 0f 1f 44 00 00 48 89 c2 fa 66 0f 1f 44 00 00 48 89 55 00 40 84 f6 75 77 <f0> 48 0f ba 2b 00 72 09 31 c0 5b 5d 41 5c 41 5d c3 48 89 df e8 6c
  RSP: 0018:ffffb6b3cf7cfa48 EFLAGS: 00010046
  RAX: 0000000000000246 RBX: 00000000000001b0 RCX: 0000000000000000
  RDX: 0000000000000246 RSI: 0000000000000000 RDI: 00000000000001b0
  RBP: ffffb6b3cf7cfa70 R08: 0000000000000f09 R09: 0000000000000001
  R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
  R13: ffffb6b3cf7cfa90 R14: ffffffff9b2fbfc0 R15: ffff8a4fdf244690
  FS:  0000000000000000(0000) GS:ffff8a527f400000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000000001b0 CR3: 00000017e2410003 CR4: 00000000007706f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  PKRU: 55555554
  Call Trace:
   __cancel_work_timer+0x42/0x190
   ? dev_printk_emit+0x4e/0x70
   iowait_cancel_work+0x15/0x30 [hfi1]
   hfi1_ipoib_txreq_deinit+0x5a/0x220 [hfi1]
   ? dev_err+0x6c/0x90
   hfi1_ipoib_netdev_dtor+0x15/0x30 [hfi1]
   hfi1_ipoib_setup_rn+0x10e/0x150 [hfi1]
   rdma_init_netdev+0x5a/0x80 [ib_core]
   ? hfi1_ipoib_free_rdma_netdev+0x20/0x20 [hfi1]
   ipoib_intf_init+0x6c/0x350 [ib_ipoib]
   ipoib_intf_alloc+0x5c/0xc0 [ib_ipoib]
   ipoib_add_one+0xbe/0x300 [ib_ipoib]
   add_client_context+0x12c/0x1a0 [ib_core]
   enable_device_and_get+0xdc/0x1d0 [ib_core]
   ib_register_device+0x572/0x6b0 [ib_core]
   rvt_register_device+0x11b/0x220 [rdmavt]
   hfi1_register_ib_device+0x6b4/0x770 [hfi1]
   do_init_one.isra.20+0x3e3/0x680 [hfi1]
   local_pci_probe+0x41/0x90
   work_for_cpu_fn+0x16/0x20
   process_one_work+0x1a7/0x360
   ? create_worker+0x1a0/0x1a0
   worker_thread+0x1cf/0x390
   ? create_worker+0x1a0/0x1a0
   kthread+0x116/0x130
   ? kthread_flush_work_fn+0x10/0x10
   ret_from_fork+0x1f/0x40

The panic happens in hfi1_ipoib_txreq_deinit() because there is a NULL
deref when hfi1_ipoib_netdev_dtor() is called in this error case.

hfi1_ipoib_txreq_init() and hfi1_ipoib_rxq_init() are self unwinding so
fix by adjusting the error paths accordingly.

Other changes:
- hfi1_ipoib_free_rdma_netdev() is deleted including the free_netdev()
  since the netdev core code deletes calls free_netdev()
- The switch to the accelerated entrances is moved to the success path.

Cc: stable@vger.kernel.org
Fixes: d99dc602e2a5 ("IB/hfi1: Add functions to transmit datagram ipoib packets")
Link: https://lore.kernel.org/r/1642287756-182313-4-git-send-email-mike.marciniszyn@cornelisnetworks.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/hw/hfi1/ipoib_main.c |   13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

--- a/drivers/infiniband/hw/hfi1/ipoib_main.c
+++ b/drivers/infiniband/hw/hfi1/ipoib_main.c
@@ -185,12 +185,6 @@ static void hfi1_ipoib_netdev_dtor(struc
 	free_percpu(priv->netstats);
 }
 
-static void hfi1_ipoib_free_rdma_netdev(struct net_device *dev)
-{
-	hfi1_ipoib_netdev_dtor(dev);
-	free_netdev(dev);
-}
-
 static void hfi1_ipoib_set_id(struct net_device *dev, int id)
 {
 	struct hfi1_ipoib_dev_priv *priv = hfi1_ipoib_priv(dev);
@@ -227,24 +221,23 @@ static int hfi1_ipoib_setup_rn(struct ib
 	priv->port_num = port_num;
 	priv->netdev_ops = netdev->netdev_ops;
 
-	netdev->netdev_ops = &hfi1_ipoib_netdev_ops;
-
 	ib_query_pkey(device, port_num, priv->pkey_index, &priv->pkey);
 
 	rc = hfi1_ipoib_txreq_init(priv);
 	if (rc) {
 		dd_dev_err(dd, "IPoIB netdev TX init - failed(%d)\n", rc);
-		hfi1_ipoib_free_rdma_netdev(netdev);
 		return rc;
 	}
 
 	rc = hfi1_ipoib_rxq_init(netdev);
 	if (rc) {
 		dd_dev_err(dd, "IPoIB netdev RX init - failed(%d)\n", rc);
-		hfi1_ipoib_free_rdma_netdev(netdev);
+		hfi1_ipoib_txreq_deinit(priv);
 		return rc;
 	}
 
+	netdev->netdev_ops = &hfi1_ipoib_netdev_ops;
+
 	netdev->priv_destructor = hfi1_ipoib_netdev_dtor;
 	netdev->needs_free_netdev = true;
 

[PATCH 5.10 23/74] Revert "ASoC: mediatek: Check for error clk pointer"

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

This reverts commit d491a2c2cf96f9f3d855cf0bcd807d48ccb98e81 which is
commit 9de2b9286a6dd16966959b3cb34fc2ddfd39213e upstream

With this patch in the tree, Chromebooks running the affected hardware
no longer boot. Bisect points to this patch, and reverting it fixes
the problem.

An analysis of the code with this patch applied shows:

        ret = init_clks(pdev, clk);
        if (ret)
                return ERR_PTR(ret);
...
                for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) {
                        struct clk *c = clk[data->clk_id[j]];

                        if (IS_ERR(c)) {
                                dev_err(&pdev->dev, "%s: clk unavailable\n",
                                        data->name);
                                return ERR_CAST(c);
                        }

                        scpd->clk[j] = c;
                }

Not all clocks in the clk_names array have to be present. Only the clocks
in the data->clk_id array are actually needed. The code already checks if
the required clocks are available and bails out if not. The assumption that
all clocks have to be present is wrong, and commit 9de2b9286a6d needs to be
reverted.

Fixes: 9de2b9286a6d ("ASoC: mediatek: Check for error clk pointer")
Cc: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Cc: Mark Brown <broonie@kernel.org>
Cc: James Liao <jamesjj.liao@mediatek.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com
Cc: Frank Wunderlich <frank-w@public-files.de>
Cc: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/lkml/20220205014755.699603-1-linux@roeck-us.net/
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/soc/mediatek/mtk-scpsys.c |   15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -411,17 +411,12 @@ out:
 	return ret;
 }
 
-static int init_clks(struct platform_device *pdev, struct clk **clk)
+static void init_clks(struct platform_device *pdev, struct clk **clk)
 {
 	int i;
 
-	for (i = CLK_NONE + 1; i < CLK_MAX; i++) {
+	for (i = CLK_NONE + 1; i < CLK_MAX; i++)
 		clk[i] = devm_clk_get(&pdev->dev, clk_names[i]);
-		if (IS_ERR(clk[i]))
-			return PTR_ERR(clk[i]);
-	}
-
-	return 0;
 }
 
 static struct scp *init_scp(struct platform_device *pdev,
@@ -431,7 +426,7 @@ static struct scp *init_scp(struct platf
 {
 	struct genpd_onecell_data *pd_data;
 	struct resource *res;
-	int i, j, ret;
+	int i, j;
 	struct scp *scp;
 	struct clk *clk[CLK_MAX];
 
@@ -486,9 +481,7 @@ static struct scp *init_scp(struct platf
 
 	pd_data->num_domains = num;
 
-	ret = init_clks(pdev, clk);
-	if (ret)
-		return ERR_PTR(ret);
+	init_clks(pdev, clk);
 
 	for (i = 0; i < num; i++) {
 		struct scp_domain *scpd = &scp->domains[i];

[PATCH 5.10 24/74] memcg: charge fs_context and legacy_fs_context

[Greg Kroah-Hartman]

From: Yutian Yang <nglaive@gmail.com>

commit bb902cb47cf93b33cd92b3b7a4019330a03ef57f upstream.

This patch adds accounting flags to fs_context and legacy_fs_context
allocation sites so that kernel could correctly charge these objects.

We have written a PoC to demonstrate the effect of the missing-charging
bugs.  The PoC takes around 1,200MB unaccounted memory, while it is
charged for only 362MB memory usage.  We evaluate the PoC on QEMU x86_64
v5.2.90 + Linux kernel v5.10.19 + Debian buster.  All the limitations
including ulimits and sysctl variables are set as default.  Specifically,
the hard NOFILE limit and nr_open in sysctl are both 1,048,576.

/*------------------------- POC code ----------------------------*/

#define _GNU_SOURCE
#include <sys/types.h>
#include <sys/file.h>
#include <time.h>
#include <sys/wait.h>
#include <stdint.h>
#include <stdlib.h>
#include <unistd.h>
#include <stdio.h>
#include <signal.h>
#include <sched.h>
#include <fcntl.h>
#include <linux/mount.h>

#define errExit(msg)    do { perror(msg); exit(EXIT_FAILURE); \
                        } while (0)

#define STACK_SIZE (8 * 1024)
#ifndef __NR_fsopen
#define __NR_fsopen 430
#endif
static inline int fsopen(const char *fs_name, unsigned int flags)
{
        return syscall(__NR_fsopen, fs_name, flags);
}

static char thread_stack[512][STACK_SIZE];

int thread_fn(void* arg)
{
  for (int i = 0; i< 800000; ++i) {
    int fsfd = fsopen("nfs", FSOPEN_CLOEXEC);
    if (fsfd == -1) {
      errExit("fsopen");
    }
  }
  while(1);
  return 0;
}

int main(int argc, char *argv[]) {
  int thread_pid;
  for (int i = 0; i < 1; ++i) {
    thread_pid = clone(thread_fn, thread_stack[i] + STACK_SIZE, \
      SIGCHLD, NULL);
  }
  while(1);
  return 0;
}

/*-------------------------- end --------------------------------*/

Link: https://lkml.kernel.org/r/1626517201-24086-1-git-send-email-nglaive@gmail.com
Signed-off-by: Yutian Yang <nglaive@gmail.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <shenwenbo@zju.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/fs_context.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/fs_context.c
+++ b/fs/fs_context.c
@@ -231,7 +231,7 @@ static struct fs_context *alloc_fs_conte
 	struct fs_context *fc;
 	int ret = -ENOMEM;
 
-	fc = kzalloc(sizeof(struct fs_context), GFP_KERNEL);
+	fc = kzalloc(sizeof(struct fs_context), GFP_KERNEL_ACCOUNT);
 	if (!fc)
 		return ERR_PTR(-ENOMEM);
 
@@ -631,7 +631,7 @@ const struct fs_context_operations legac
  */
 static int legacy_init_fs_context(struct fs_context *fc)
 {
-	fc->fs_private = kzalloc(sizeof(struct legacy_fs_context), GFP_KERNEL);
+	fc->fs_private = kzalloc(sizeof(struct legacy_fs_context), GFP_KERNEL_ACCOUNT);
 	if (!fc->fs_private)
 		return -ENOMEM;
 	fc->ops = &legacy_fs_context_ops;

[PATCH 5.10 25/74] RDMA/cma: Use correct address when leaving multicast group

[Greg Kroah-Hartman]

From: Maor Gottlieb <maorg@nvidia.com>

commit d9e410ebbed9d091b97bdf45b8a3792e2878dc48 upstream.

In RoCE we should use cma_iboe_set_mgid() and not cma_set_mgid to generate
the mgid, otherwise we will generate an IGMP for an incorrect address.

Fixes: b5de0c60cc30 ("RDMA/cma: Fix use after free race in roce multicast join")
Link: https://lore.kernel.org/r/913bc6783fd7a95fe71ad9454e01653ee6fb4a9a.1642491047.git.leonro@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/core/cma.c |   22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -68,8 +68,8 @@ static const char * const cma_events[] =
 	[RDMA_CM_EVENT_TIMEWAIT_EXIT]	 = "timewait exit",
 };
 
-static void cma_set_mgid(struct rdma_id_private *id_priv, struct sockaddr *addr,
-			 union ib_gid *mgid);
+static void cma_iboe_set_mgid(struct sockaddr *addr, union ib_gid *mgid,
+			      enum ib_gid_type gid_type);
 
 const char *__attribute_const__ rdma_event_msg(enum rdma_cm_event_type event)
 {
@@ -1840,17 +1840,19 @@ static void destroy_mc(struct rdma_id_pr
 		if (dev_addr->bound_dev_if)
 			ndev = dev_get_by_index(dev_addr->net,
 						dev_addr->bound_dev_if);
-		if (ndev) {
+		if (ndev && !send_only) {
+			enum ib_gid_type gid_type;
 			union ib_gid mgid;
 
-			cma_set_mgid(id_priv, (struct sockaddr *)&mc->addr,
-				     &mgid);
-
-			if (!send_only)
-				cma_igmp_send(ndev, &mgid, false);
-
-			dev_put(ndev);
+			gid_type = id_priv->cma_dev->default_gid_type
+					   [id_priv->id.port_num -
+					    rdma_start_port(
+						    id_priv->cma_dev->device)];
+			cma_iboe_set_mgid((struct sockaddr *)&mc->addr, &mgid,
+					  gid_type);
+			cma_igmp_send(ndev, &mgid, false);
 		}
+		dev_put(ndev);
 
 		cancel_work_sync(&mc->iboe_join.work);
 	}

[PATCH 5.10 26/74] RDMA/ucma: Protect mc during concurrent multicast leaves

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@nvidia.com>

commit 36e8169ec973359f671f9ec7213547059cae972e upstream.

Partially revert the commit mentioned in the Fixes line to make sure that
allocation and erasing multicast struct are locked.

  BUG: KASAN: use-after-free in ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline]
  BUG: KASAN: use-after-free in ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579
  Read of size 8 at addr ffff88801bb74b00 by task syz-executor.1/25529
  CPU: 0 PID: 25529 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:88 [inline]
   dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
   print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247
   __kasan_report mm/kasan/report.c:433 [inline]
   kasan_report.cold+0x83/0xdf mm/kasan/report.c:450
   ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline]
   ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579
   ucma_destroy_id+0x1e6/0x280 drivers/infiniband/core/ucma.c:614
   ucma_write+0x25c/0x350 drivers/infiniband/core/ucma.c:1732
   vfs_write+0x28e/0xae0 fs/read_write.c:588
   ksys_write+0x1ee/0x250 fs/read_write.c:643
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Currently the xarray search can touch a concurrently freeing mc as the
xa_for_each() is not surrounded by any lock. Rather than hold the lock for
a full scan hold it only for the effected items, which is usually an empty
list.

Fixes: 95fe51096b7a ("RDMA/ucma: Remove mc_list and rely on xarray")
Link: https://lore.kernel.org/r/1cda5fabb1081e8d16e39a48d3a4f8160cea88b8.1642491047.git.leonro@nvidia.com
Reported-by: syzbot+e3f96c43d19782dd14a7@syzkaller.appspotmail.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/core/ucma.c |   34 +++++++++++++++++++++++-----------
 1 file changed, 23 insertions(+), 11 deletions(-)

--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -95,6 +95,7 @@ struct ucma_context {
 	u64			uid;
 
 	struct list_head	list;
+	struct list_head	mc_list;
 	struct work_struct	close_work;
 };
 
@@ -105,6 +106,7 @@ struct ucma_multicast {
 
 	u64			uid;
 	u8			join_state;
+	struct list_head	list;
 	struct sockaddr_storage	addr;
 };
 
@@ -198,6 +200,7 @@ static struct ucma_context *ucma_alloc_c
 
 	INIT_WORK(&ctx->close_work, ucma_close_id);
 	init_completion(&ctx->comp);
+	INIT_LIST_HEAD(&ctx->mc_list);
 	/* So list_del() will work if we don't do ucma_finish_ctx() */
 	INIT_LIST_HEAD(&ctx->list);
 	ctx->file = file;
@@ -484,19 +487,19 @@ err1:
 
 static void ucma_cleanup_multicast(struct ucma_context *ctx)
 {
-	struct ucma_multicast *mc;
-	unsigned long index;
+	struct ucma_multicast *mc, *tmp;
 
-	xa_for_each(&multicast_table, index, mc) {
-		if (mc->ctx != ctx)
-			continue;
+	xa_lock(&multicast_table);
+	list_for_each_entry_safe(mc, tmp, &ctx->mc_list, list) {
+		list_del(&mc->list);
 		/*
 		 * At this point mc->ctx->ref is 0 so the mc cannot leave the
 		 * lock on the reader and this is enough serialization
 		 */
-		xa_erase(&multicast_table, index);
+		__xa_erase(&multicast_table, mc->id);
 		kfree(mc);
 	}
+	xa_unlock(&multicast_table);
 }
 
 static void ucma_cleanup_mc_events(struct ucma_multicast *mc)
@@ -1469,12 +1472,16 @@ static ssize_t ucma_process_join(struct
 	mc->uid = cmd->uid;
 	memcpy(&mc->addr, addr, cmd->addr_size);
 
-	if (xa_alloc(&multicast_table, &mc->id, NULL, xa_limit_32b,
+	xa_lock(&multicast_table);
+	if (__xa_alloc(&multicast_table, &mc->id, NULL, xa_limit_32b,
 		     GFP_KERNEL)) {
 		ret = -ENOMEM;
 		goto err_free_mc;
 	}
 
+	list_add_tail(&mc->list, &ctx->mc_list);
+	xa_unlock(&multicast_table);
+
 	mutex_lock(&ctx->mutex);
 	ret = rdma_join_multicast(ctx->cm_id, (struct sockaddr *)&mc->addr,
 				  join_state, mc);
@@ -1500,8 +1507,11 @@ err_leave_multicast:
 	mutex_unlock(&ctx->mutex);
 	ucma_cleanup_mc_events(mc);
 err_xa_erase:
-	xa_erase(&multicast_table, mc->id);
+	xa_lock(&multicast_table);
+	list_del(&mc->list);
+	__xa_erase(&multicast_table, mc->id);
 err_free_mc:
+	xa_unlock(&multicast_table);
 	kfree(mc);
 err_put_ctx:
 	ucma_put_ctx(ctx);
@@ -1569,15 +1579,17 @@ static ssize_t ucma_leave_multicast(stru
 		mc = ERR_PTR(-EINVAL);
 	else if (!refcount_inc_not_zero(&mc->ctx->ref))
 		mc = ERR_PTR(-ENXIO);
-	else
-		__xa_erase(&multicast_table, mc->id);
-	xa_unlock(&multicast_table);
 
 	if (IS_ERR(mc)) {
+		xa_unlock(&multicast_table);
 		ret = PTR_ERR(mc);
 		goto out;
 	}
 
+	list_del(&mc->list);
+	__xa_erase(&multicast_table, mc->id);
+	xa_unlock(&multicast_table);
+
 	mutex_lock(&mc->ctx->mutex);
 	rdma_leave_multicast(mc->ctx->cm_id, (struct sockaddr *) &mc->addr);
 	mutex_unlock(&mc->ctx->mutex);

[PATCH 5.10 27/74] IB/rdmavt: Validate remote_addr during loopback atomic tests

[Greg Kroah-Hartman]

From: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>

commit 4028bccb003cf67e46632dee7f97ddc5d7b6e685 upstream.

The rdma-core test suite sends an unaligned remote address and expects a
failure.

ERROR: test_atomic_non_aligned_addr (tests.test_atomic.AtomicTest)

The qib/hfi1 rc handling validates properly, but the test has the client
and server on the same system.

The loopback of these operations is a distinct code path.

Fix by syntaxing the proposed remote address in the loopback code path.

Fixes: 15703461533a ("IB/{hfi1, qib, rdmavt}: Move ruc_loopback to rdmavt")
Link: https://lore.kernel.org/r/1642584489-141005-1-git-send-email-mike.marciniszyn@cornelisnetworks.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/sw/rdmavt/qp.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/infiniband/sw/rdmavt/qp.c
+++ b/drivers/infiniband/sw/rdmavt/qp.c
@@ -3124,6 +3124,8 @@ do_write:
 	case IB_WR_ATOMIC_FETCH_AND_ADD:
 		if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_ATOMIC)))
 			goto inv_err;
+		if (unlikely(wqe->atomic_wr.remote_addr & (sizeof(u64) - 1)))
+			goto inv_err;
 		if (unlikely(!rvt_rkey_ok(qp, &qp->r_sge.sge, sizeof(u64),
 					  wqe->atomic_wr.remote_addr,
 					  wqe->atomic_wr.rkey,

[PATCH 5.10 28/74] RDMA/siw: Fix broken RDMA Read Fence/Resume logic.

[Greg Kroah-Hartman]

From: Bernard Metzler <bmt@zurich.ibm.com>

commit b43a76f423aa304037603fd6165c4a534d2c09a7 upstream.

Code unconditionally resumed fenced SQ processing after next RDMA Read
completion, even if other RDMA Read responses are still outstanding, or
ORQ is full. Also adds comments for better readability of fence
processing, and removes orq_get_tail() helper, which is not needed
anymore.

Fixes: 8b6a361b8c48 ("rdma/siw: receive path")
Fixes: a531975279f3 ("rdma/siw: main include file")
Link: https://lore.kernel.org/r/20220130170815.1940-1-bmt@zurich.ibm.com
Reported-by: Jared Holzman <jared.holzman@excelero.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/sw/siw/siw.h       |    7 +------
 drivers/infiniband/sw/siw/siw_qp_rx.c |   20 +++++++++++---------
 2 files changed, 12 insertions(+), 15 deletions(-)

--- a/drivers/infiniband/sw/siw/siw.h
+++ b/drivers/infiniband/sw/siw/siw.h
@@ -644,14 +644,9 @@ static inline struct siw_sqe *orq_get_cu
 	return &qp->orq[qp->orq_get % qp->attrs.orq_size];
 }
 
-static inline struct siw_sqe *orq_get_tail(struct siw_qp *qp)
-{
-	return &qp->orq[qp->orq_put % qp->attrs.orq_size];
-}
-
 static inline struct siw_sqe *orq_get_free(struct siw_qp *qp)
 {
-	struct siw_sqe *orq_e = orq_get_tail(qp);
+	struct siw_sqe *orq_e = &qp->orq[qp->orq_put % qp->attrs.orq_size];
 
 	if (READ_ONCE(orq_e->flags) == 0)
 		return orq_e;
--- a/drivers/infiniband/sw/siw/siw_qp_rx.c
+++ b/drivers/infiniband/sw/siw/siw_qp_rx.c
@@ -1153,11 +1153,12 @@ static int siw_check_tx_fence(struct siw
 
 	spin_lock_irqsave(&qp->orq_lock, flags);
 
-	rreq = orq_get_current(qp);
-
 	/* free current orq entry */
+	rreq = orq_get_current(qp);
 	WRITE_ONCE(rreq->flags, 0);
 
+	qp->orq_get++;
+
 	if (qp->tx_ctx.orq_fence) {
 		if (unlikely(tx_waiting->wr_status != SIW_WR_QUEUED)) {
 			pr_warn("siw: [QP %u]: fence resume: bad status %d\n",
@@ -1165,10 +1166,12 @@ static int siw_check_tx_fence(struct siw
 			rv = -EPROTO;
 			goto out;
 		}
-		/* resume SQ processing */
+		/* resume SQ processing, if possible */
 		if (tx_waiting->sqe.opcode == SIW_OP_READ ||
 		    tx_waiting->sqe.opcode == SIW_OP_READ_LOCAL_INV) {
-			rreq = orq_get_tail(qp);
+
+			/* SQ processing was stopped because of a full ORQ */
+			rreq = orq_get_free(qp);
 			if (unlikely(!rreq)) {
 				pr_warn("siw: [QP %u]: no ORQE\n", qp_id(qp));
 				rv = -EPROTO;
@@ -1181,15 +1184,14 @@ static int siw_check_tx_fence(struct siw
 			resume_tx = 1;
 
 		} else if (siw_orq_empty(qp)) {
+			/*
+			 * SQ processing was stopped by fenced work request.
+			 * Resume since all previous Read's are now completed.
+			 */
 			qp->tx_ctx.orq_fence = 0;
 			resume_tx = 1;
-		} else {
-			pr_warn("siw: [QP %u]: fence resume: orq idx: %d:%d\n",
-				qp_id(qp), qp->orq_get, qp->orq_put);
-			rv = -EPROTO;
 		}
 	}
-	qp->orq_get++;
 out:
 	spin_unlock_irqrestore(&qp->orq_lock, flags);
 

[PATCH 5.10 29/74] RDMA/mlx4: Dont continue event handler after memory allocation failure

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@nvidia.com>

commit f3136c4ce7acf64bee43135971ca52a880572e32 upstream.

The failure to allocate memory during MLX4_DEV_EVENT_PORT_MGMT_CHANGE
event handler will cause skip the assignment logic, but
ib_dispatch_event() will be called anyway.

Fix it by calling to return instead of break after memory allocation
failure.

Fixes: 00f5ce99dc6e ("mlx4: Use port management change event instead of smp_snoop")
Link: https://lore.kernel.org/r/12a0e83f18cfad4b5f62654f141e240d04915e10.1643622264.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/hw/mlx4/main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -3273,7 +3273,7 @@ static void mlx4_ib_event(struct mlx4_de
 	case MLX4_DEV_EVENT_PORT_MGMT_CHANGE:
 		ew = kmalloc(sizeof *ew, GFP_ATOMIC);
 		if (!ew)
-			break;
+			return;
 
 		INIT_WORK(&ew->work, handle_port_mgmt_change_event);
 		memcpy(&ew->ib_eqe, eqe, sizeof *eqe);

[PATCH 5.10 30/74] iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping()

[Greg Kroah-Hartman]

From: Guoqing Jiang <guoqing.jiang@linux.dev>

commit 99e675d473eb8cf2deac1376a0f840222fc1adcf upstream.

After commit e3beca48a45b ("irqdomain/treewide: Keep firmware node
unconditionally allocated"). For tear down scenario, fn is only freed
after fail to allocate ir_domain, though it also should be freed in case
dmar_enable_qi returns error.

Besides free fn, irq_domain and ir_msi_domain need to be removed as well
if intel_setup_irq_remapping fails to enable queued invalidation.

Improve the rewinding path by add out_free_ir_domain and out_free_fwnode
lables per Baolu's suggestion.

Fixes: e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated")
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220119063640.16864-1-guoqing.jiang@linux.dev
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220128031002.2219155-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iommu/intel/irq_remapping.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

--- a/drivers/iommu/intel/irq_remapping.c
+++ b/drivers/iommu/intel/irq_remapping.c
@@ -576,9 +576,8 @@ static int intel_setup_irq_remapping(str
 					    fn, &intel_ir_domain_ops,
 					    iommu);
 	if (!iommu->ir_domain) {
-		irq_domain_free_fwnode(fn);
 		pr_err("IR%d: failed to allocate irqdomain\n", iommu->seq_id);
-		goto out_free_bitmap;
+		goto out_free_fwnode;
 	}
 	iommu->ir_msi_domain =
 		arch_create_remap_msi_irq_domain(iommu->ir_domain,
@@ -602,7 +601,7 @@ static int intel_setup_irq_remapping(str
 
 		if (dmar_enable_qi(iommu)) {
 			pr_err("Failed to enable queued invalidation\n");
-			goto out_free_bitmap;
+			goto out_free_ir_domain;
 		}
 	}
 
@@ -626,6 +625,14 @@ static int intel_setup_irq_remapping(str
 
 	return 0;
 
+out_free_ir_domain:
+	if (iommu->ir_msi_domain)
+		irq_domain_remove(iommu->ir_msi_domain);
+	iommu->ir_msi_domain = NULL;
+	irq_domain_remove(iommu->ir_domain);
+	iommu->ir_domain = NULL;
+out_free_fwnode:
+	irq_domain_free_fwnode(fn);
 out_free_bitmap:
 	bitmap_free(bitmap);
 out_free_pages:

[PATCH 5.10 31/74] iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()

[Greg Kroah-Hartman]

From: Joerg Roedel <jroedel@suse.de>

commit 9b45a7738eec52bf0f5d8d3d54e822962781c5f2 upstream.

The polling loop for the register change in iommu_ga_log_enable() needs
to have a udelay() in it.  Otherwise the CPU might be faster than the
IOMMU hardware and wrongly trigger the WARN_ON() further down the code
stream. Use a 10us for udelay(), has there is some hardware where
activation of the GA log can take more than a 100ms.

A future optimization should move the activation check of the GA log
to the point where it gets used for the first time. But that is a
bigger change and not suitable for a fix.

Fixes: 8bda0cfbdc1a ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220204115537.3894-1-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iommu/amd/init.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -20,6 +20,7 @@
 #include <linux/export.h>
 #include <linux/kmemleak.h>
 #include <linux/mem_encrypt.h>
+#include <linux/iopoll.h>
 #include <asm/pci-direct.h>
 #include <asm/iommu.h>
 #include <asm/apic.h>
@@ -833,6 +834,7 @@ static int iommu_ga_log_enable(struct am
 		status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
 		if (status & (MMIO_STATUS_GALOG_RUN_MASK))
 			break;
+		udelay(10);
 	}
 
 	if (WARN_ON(i >= LOOP_TIMEOUT))

[PATCH 5.10 32/74] spi: bcm-qspi: check for valid cs before applying chip select

[Greg Kroah-Hartman]

From: Kamal Dasu <kdasu.kdev@gmail.com>

commit 2cbd27267ffe020af1442b95ec57f59a157ba85c upstream.

Apply only valid chip select value. This change fixes case where chip
select is set to initial value of '-1' during probe and  PM supend and
subsequent resume can try to use the value with undefined behaviour.
Also in case where gpio based chip select, the check in
bcm_qspi_chip_select() shall prevent undefined behaviour on resume.

Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220127185359.27322-1-kdasu.kdev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-bcm-qspi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -551,7 +551,7 @@ static void bcm_qspi_chip_select(struct
 	u32 rd = 0;
 	u32 wr = 0;
 
-	if (qspi->base[CHIP_SELECT]) {
+	if (cs >= 0 && qspi->base[CHIP_SELECT]) {
 		rd = bcm_qspi_read(qspi, CHIP_SELECT, 0);
 		wr = (rd & ~0xff) | (1 << cs);
 		if (rd == wr)

[PATCH 5.10 33/74] spi: mediatek: Avoid NULL pointer crash in interrupt

[Greg Kroah-Hartman]

From: Benjamin Gaignard <benjamin.gaignard@collabora.com>

commit f83a96e5f033fbbd21764705cb9c04234b96218e upstream.

In some case, like after a transfer timeout, master->cur_msg pointer
is NULL which led to a kernel crash when trying to use master->cur_msg->spi.
mtk_spi_can_dma(), pointed by master->can_dma, doesn't use this parameter
avoid the problem by setting NULL as second parameter.

Fixes: a568231f46322 ("spi: mediatek: Add spi bus for Mediatek MT8173")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Link: https://lore.kernel.org/r/20220131141708.888710-1-benjamin.gaignard@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-mt65xx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -540,7 +540,7 @@ static irqreturn_t mtk_spi_interrupt(int
 	else
 		mdata->state = MTK_SPI_IDLE;
 
-	if (!master->can_dma(master, master->cur_msg->spi, trans)) {
+	if (!master->can_dma(master, NULL, trans)) {
 		if (trans->rx_buf) {
 			cnt = mdata->xfer_len / 4;
 			ioread32_rep(mdata->base + SPI_RX_DATA_REG,

[PATCH 5.10 34/74] spi: meson-spicc: add IRQ check in meson_spicc_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

commit e937440f7fc444a3e3f1fb75ea65292d6f433a44 upstream.

This check misses checking for  platform_get_irq()'s call and may passes
the negative error codes to devm_request_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.
Stop calling devm_request_irq() with invalid IRQ #s.

Fixes: 454fa271bc4e ("spi: Add Meson SPICC driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220126110447.24549-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-meson-spicc.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/spi/spi-meson-spicc.c
+++ b/drivers/spi/spi-meson-spicc.c
@@ -693,6 +693,11 @@ static int meson_spicc_probe(struct plat
 	writel_relaxed(0, spicc->base + SPICC_INTREG);
 
 	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto out_master;
+	}
+
 	ret = devm_request_irq(&pdev->dev, irq, meson_spicc_irq,
 			       0, NULL, spicc);
 	if (ret) {

[PATCH 5.10 35/74] spi: uniphier: fix reference count leak in uniphier_spi_probe()

[Greg Kroah-Hartman]

From: Xin Xiong <xiongx18@fudan.edu.cn>

commit 37c2c83ca4f1ef4b6908181ac98e18360af89b42 upstream.

The issue happens in several error paths in uniphier_spi_probe().
When either dma_get_slave_caps() or devm_spi_register_master() returns
an error code, the function forgets to decrease the refcount of both
`dma_rx` and `dma_tx` objects, which may lead to refcount leaks.

Fix it by decrementing the reference count of specific objects in
those error paths.

Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Fixes: 28d1dddc59f6 ("spi: uniphier: Add DMA transfer mode support")
Link: https://lore.kernel.org/r/20220125101214.35677-1-xiongx18@fudan.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-uniphier.c |   18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

--- a/drivers/spi/spi-uniphier.c
+++ b/drivers/spi/spi-uniphier.c
@@ -726,7 +726,7 @@ static int uniphier_spi_probe(struct pla
 		if (ret) {
 			dev_err(&pdev->dev, "failed to get TX DMA capacities: %d\n",
 				ret);
-			goto out_disable_clk;
+			goto out_release_dma;
 		}
 		dma_tx_burst = caps.max_burst;
 	}
@@ -735,7 +735,7 @@ static int uniphier_spi_probe(struct pla
 	if (IS_ERR_OR_NULL(master->dma_rx)) {
 		if (PTR_ERR(master->dma_rx) == -EPROBE_DEFER) {
 			ret = -EPROBE_DEFER;
-			goto out_disable_clk;
+			goto out_release_dma;
 		}
 		master->dma_rx = NULL;
 		dma_rx_burst = INT_MAX;
@@ -744,7 +744,7 @@ static int uniphier_spi_probe(struct pla
 		if (ret) {
 			dev_err(&pdev->dev, "failed to get RX DMA capacities: %d\n",
 				ret);
-			goto out_disable_clk;
+			goto out_release_dma;
 		}
 		dma_rx_burst = caps.max_burst;
 	}
@@ -753,10 +753,20 @@ static int uniphier_spi_probe(struct pla
 
 	ret = devm_spi_register_master(&pdev->dev, master);
 	if (ret)
-		goto out_disable_clk;
+		goto out_release_dma;
 
 	return 0;
 
+out_release_dma:
+	if (!IS_ERR_OR_NULL(master->dma_rx)) {
+		dma_release_channel(master->dma_rx);
+		master->dma_rx = NULL;
+	}
+	if (!IS_ERR_OR_NULL(master->dma_tx)) {
+		dma_release_channel(master->dma_tx);
+		master->dma_tx = NULL;
+	}
+
 out_disable_clk:
 	clk_disable_unprepare(priv->clk);
 

[PATCH 5.10 36/74] net: ieee802154: hwsim: Ensure proper channel selection at probe time

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit 1293fccc9e892712d910ec96079d3717307f1d2d upstream.

Drivers are expected to set the PHY current_channel and current_page
according to their default state. The hwsim driver is advertising being
configured on channel 13 by default but that is not reflected in its own
internal pib structure. In order to ensure that this driver consider the
current channel as being 13 internally, we at least need to set the
pib->channel field to 13.

Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[stefan@datenfreihafen.org: fixed assigment from page to channel]
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ieee802154/mac802154_hwsim.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/ieee802154/mac802154_hwsim.c
+++ b/drivers/net/ieee802154/mac802154_hwsim.c
@@ -786,6 +786,7 @@ static int hwsim_add_one(struct genl_inf
 		goto err_pib;
 	}
 
+	pib->channel = 13;
 	rcu_assign_pointer(phy->pib, pib);
 	phy->idx = idx;
 	INIT_LIST_HEAD(&phy->edges);

[PATCH 5.10 37/74] net: ieee802154: mcr20a: Fix lifs/sifs periods

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit d753c4004820a888ec007dd88b271fa9c3172c5c upstream.

These periods are expressed in time units (microseconds) while 40 and 12
are the number of symbol durations these periods will last. We need to
multiply them both with phy->symbol_duration in order to get these
values in microseconds.

Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-3-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ieee802154/mcr20a.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ieee802154/mcr20a.c
+++ b/drivers/net/ieee802154/mcr20a.c
@@ -976,8 +976,8 @@ static void mcr20a_hw_setup(struct mcr20
 	dev_dbg(printdev(lp), "%s\n", __func__);
 
 	phy->symbol_duration = 16;
-	phy->lifs_period = 40;
-	phy->sifs_period = 12;
+	phy->lifs_period = 40 * phy->symbol_duration;
+	phy->sifs_period = 12 * phy->symbol_duration;
 
 	hw->flags = IEEE802154_HW_TX_OMIT_CKSUM |
 			IEEE802154_HW_AFILT |

[PATCH 5.10 38/74] net: ieee802154: ca8210: Stop leaking skbs

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit 621b24b09eb61c63f262da0c9c5f0e93348897e5 upstream.

Upon error the ieee802154_xmit_complete() helper is not called. Only
ieee802154_wake_queue() is called manually. We then leak the skb
structure.

Free the skb structure upon error before returning.

Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-5-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ieee802154/ca8210.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/ieee802154/ca8210.c
+++ b/drivers/net/ieee802154/ca8210.c
@@ -1771,6 +1771,7 @@ static int ca8210_async_xmit_complete(
 			status
 		);
 		if (status != MAC_TRANSACTION_OVERFLOW) {
+			dev_kfree_skb_any(priv->tx_skb);
 			ieee802154_wake_queue(priv->hw);
 			return 0;
 		}

[PATCH 5.10 39/74] net: ieee802154: Return meaningful error codes from the netlink helpers

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit 79c37ca73a6e9a33f7b2b7783ba6af07a448c8a9 upstream.

Returning -1 does not indicate anything useful.

Use a standard and meaningful error code instead.

Fixes: a26c5fd7622d ("nl802154: add support for security layer")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-6-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ieee802154/nl802154.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/net/ieee802154/nl802154.c
+++ b/net/ieee802154/nl802154.c
@@ -1441,7 +1441,7 @@ static int nl802154_send_key(struct sk_b
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;
@@ -1634,7 +1634,7 @@ static int nl802154_send_device(struct s
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;
@@ -1812,7 +1812,7 @@ static int nl802154_send_devkey(struct s
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;
@@ -1988,7 +1988,7 @@ static int nl802154_send_seclevel(struct
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;

[PATCH 5.10 40/74] net: macsec: Fix offload support for NETDEV_UNREGISTER event

[Greg Kroah-Hartman]

From: Lior Nahmanson <liorna@nvidia.com>

commit 9cef24c8b76c1f6effe499d2f131807c90f7ce9a upstream.

Current macsec netdev notify handler handles NETDEV_UNREGISTER event by
releasing relevant SW resources only, this causes resources leak in case
of macsec HW offload, as the underlay driver was not notified to clean
it's macsec offload resources.

Fix by calling the underlay driver to clean it's relevant resources
by moving offload handling from macsec_dellink() to macsec_common_dellink()
when handling NETDEV_UNREGISTER event.

Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/1643542141-28956-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/macsec.c |   24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -3869,6 +3869,18 @@ static void macsec_common_dellink(struct
 	struct macsec_dev *macsec = macsec_priv(dev);
 	struct net_device *real_dev = macsec->real_dev;
 
+	/* If h/w offloading is available, propagate to the device */
+	if (macsec_is_offloaded(macsec)) {
+		const struct macsec_ops *ops;
+		struct macsec_context ctx;
+
+		ops = macsec_get_ops(netdev_priv(dev), &ctx);
+		if (ops) {
+			ctx.secy = &macsec->secy;
+			macsec_offload(ops->mdo_del_secy, &ctx);
+		}
+	}
+
 	unregister_netdevice_queue(dev, head);
 	list_del_rcu(&macsec->secys);
 	macsec_del_dev(macsec);
@@ -3883,18 +3895,6 @@ static void macsec_dellink(struct net_de
 	struct net_device *real_dev = macsec->real_dev;
 	struct macsec_rxh_data *rxd = macsec_data_rtnl(real_dev);
 
-	/* If h/w offloading is available, propagate to the device */
-	if (macsec_is_offloaded(macsec)) {
-		const struct macsec_ops *ops;
-		struct macsec_context ctx;
-
-		ops = macsec_get_ops(netdev_priv(dev), &ctx);
-		if (ops) {
-			ctx.secy = &macsec->secy;
-			macsec_offload(ops->mdo_del_secy, &ctx);
-		}
-	}
-
 	macsec_common_dellink(dev, head);
 
 	if (list_empty(&rxd->secys)) {

[PATCH 5.10 41/74] net: macsec: Verify that send_sci is on when setting Tx sci explicitly

[Greg Kroah-Hartman]

From: Lior Nahmanson <liorna@nvidia.com>

commit d0cfa548dbde354de986911d3913897b5448faad upstream.

When setting Tx sci explicit, the Rx side is expected to use this
sci and not recalculate it from the packet.However, in case of Tx sci
is explicit and send_sci is off, the receiver is wrongly recalculate
the sci from the source MAC address which most likely be different
than the explicit sci.

Fix by preventing such configuration when macsec newlink is established
and return EINVAL error code on such cases.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/macsec.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -4017,6 +4017,15 @@ static int macsec_newlink(struct net *ne
 	    !macsec_check_offload(macsec->offload, macsec))
 		return -EOPNOTSUPP;
 
+	/* send_sci must be set to true when transmit sci explicitly is set */
+	if ((data && data[IFLA_MACSEC_SCI]) &&
+	    (data && data[IFLA_MACSEC_INC_SCI])) {
+		u8 send_sci = !!nla_get_u8(data[IFLA_MACSEC_INC_SCI]);
+
+		if (!send_sci)
+			return -EINVAL;
+	}
+
 	if (data && data[IFLA_MACSEC_ICV_LEN])
 		icv_len = nla_get_u8(data[IFLA_MACSEC_ICV_LEN]);
 	mtu = real_dev->mtu - icv_len - macsec_extra_len(true);

[PATCH 5.10 42/74] net: stmmac: dump gmac4 DMA registers correctly

[Greg Kroah-Hartman]

From: Camel Guo <camelg@axis.com>

commit 7af037c39b600bac2c716dd1228e8ddbe149573f upstream.

Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are
located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump
gmac4 DMA registers correctly, this commit checks if a net_device has
gmac4 and uses different logic to dump its DMA registers.

This fixes the following KASAN warning, which can normally be triggered
by a command similar like "ethtool -d eth0":

BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30
Write of size 4 at addr ffffffc010177100 by task ethtool/1839
 kasan_report+0x200/0x21c
 __asan_report_store4_noabort+0x34/0x60
 dwmac4_dump_dma_regs+0x6d4/0xb30
 stmmac_ethtool_gregs+0x110/0x204
 ethtool_get_regs+0x200/0x4b0
 dev_ethtool+0x1dac/0x3800
 dev_ioctl+0x7c0/0xb50
 sock_ioctl+0x298/0x6c4
 ...

Fixes: fbf68229ffe7 ("net: stmmac: unify registers dumps methods")
Signed-off-by: Camel Guo <camelg@axis.com>
Link: https://lore.kernel.org/r/20220131083841.3346801-1-camel.guo@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h      |    1 +
 drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c |   19 +++++++++++++++++--
 2 files changed, 18 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
@@ -130,6 +130,7 @@
 
 #define NUM_DWMAC100_DMA_REGS	9
 #define NUM_DWMAC1000_DMA_REGS	23
+#define NUM_DWMAC4_DMA_REGS	27
 
 void dwmac_enable_dma_transmission(void __iomem *ioaddr);
 void dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx);
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -21,10 +21,18 @@
 #include "dwxgmac2.h"
 
 #define REG_SPACE_SIZE	0x1060
+#define GMAC4_REG_SPACE_SIZE	0x116C
 #define MAC100_ETHTOOL_NAME	"st_mac100"
 #define GMAC_ETHTOOL_NAME	"st_gmac"
 #define XGMAC_ETHTOOL_NAME	"st_xgmac"
 
+/* Same as DMA_CHAN_BASE_ADDR defined in dwmac4_dma.h
+ *
+ * It is here because dwmac_dma.h and dwmac4_dam.h can not be included at the
+ * same time due to the conflicting macro names.
+ */
+#define GMAC4_DMA_CHAN_BASE_ADDR  0x00001100
+
 #define ETHTOOL_DMA_OFFSET	55
 
 struct stmmac_stats {
@@ -413,6 +421,8 @@ static int stmmac_ethtool_get_regs_len(s
 
 	if (priv->plat->has_xgmac)
 		return XGMAC_REGSIZE * 4;
+	else if (priv->plat->has_gmac4)
+		return GMAC4_REG_SPACE_SIZE;
 	return REG_SPACE_SIZE;
 }
 
@@ -425,8 +435,13 @@ static void stmmac_ethtool_gregs(struct
 	stmmac_dump_mac_regs(priv, priv->hw, reg_space);
 	stmmac_dump_dma_regs(priv, priv->ioaddr, reg_space);
 
-	if (!priv->plat->has_xgmac) {
-		/* Copy DMA registers to where ethtool expects them */
+	/* Copy DMA registers to where ethtool expects them */
+	if (priv->plat->has_gmac4) {
+		/* GMAC4 dumps its DMA registers at its DMA_CHAN_BASE_ADDR */
+		memcpy(&reg_space[ETHTOOL_DMA_OFFSET],
+		       &reg_space[GMAC4_DMA_CHAN_BASE_ADDR / 4],
+		       NUM_DWMAC4_DMA_REGS * 4);
+	} else if (!priv->plat->has_xgmac) {
 		memcpy(&reg_space[ETHTOOL_DMA_OFFSET],
 		       &reg_space[DMA_BUS_MODE / 4],
 		       NUM_DWMAC1000_DMA_REGS * 4);

[PATCH 5.10 43/74] net: stmmac: ensure PTP time register reads are consistent

[Greg Kroah-Hartman]

From: Yannick Vignon <yannick.vignon@nxp.com>

commit 80d4609008e6d696a279e39ae7458c916fcd44c1 upstream.

Even if protected from preemption and interrupts, a small time window
remains when the 2 register reads could return inconsistent values,
each time the "seconds" register changes. This could lead to an about
1-second error in the reported time.

Add logic to ensure the "seconds" and "nanoseconds" values are consistent.

Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220203160025.750632-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c |   17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
@@ -142,15 +142,20 @@ static int adjust_systime(void __iomem *
 
 static void get_systime(void __iomem *ioaddr, u64 *systime)
 {
-	u64 ns;
+	u64 ns, sec0, sec1;
 
-	/* Get the TSSS value */
-	ns = readl(ioaddr + PTP_STNSR);
-	/* Get the TSS and convert sec time value to nanosecond */
-	ns += readl(ioaddr + PTP_STSR) * 1000000000ULL;
+	/* Get the TSS value */
+	sec1 = readl_relaxed(ioaddr + PTP_STSR);
+	do {
+		sec0 = sec1;
+		/* Get the TSSS value */
+		ns = readl_relaxed(ioaddr + PTP_STNSR);
+		/* Get the TSS value */
+		sec1 = readl_relaxed(ioaddr + PTP_STSR);
+	} while (sec0 != sec1);
 
 	if (systime)
-		*systime = ns;
+		*systime = ns + (sec1 * 1000000000ULL);
 }
 
 const struct stmmac_hwtimestamp stmmac_ptp = {

[PATCH 5.10 44/74] drm/i915/overlay: Prevent divide by zero bugs in scaling

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 90a3d22ff02b196d5884e111f39271a1d4ee8e3e upstream.

Smatch detected a divide by zero bug in check_overlay_scaling().

    drivers/gpu/drm/i915/display/intel_overlay.c:976 check_overlay_scaling()
    error: potential divide by zero bug '/ rec->dst_height'.
    drivers/gpu/drm/i915/display/intel_overlay.c:980 check_overlay_scaling()
    error: potential divide by zero bug '/ rec->dst_width'.

Prevent this by ensuring that the dst height and width are non-zero.

Fixes: 02e792fbaadb ("drm/i915: implement drmmode overlay support v4")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220124122409.GA31673@kili
(cherry picked from commit cf5b64f7f10b28bebb9b7c9d25e7aee5cbe43918)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/display/intel_overlay.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/gpu/drm/i915/display/intel_overlay.c
+++ b/drivers/gpu/drm/i915/display/intel_overlay.c
@@ -932,6 +932,9 @@ static int check_overlay_dst(struct inte
 	const struct intel_crtc_state *pipe_config =
 		overlay->crtc->config;
 
+	if (rec->dst_height == 0 || rec->dst_width == 0)
+		return -EINVAL;
+
 	if (rec->dst_x < pipe_config->pipe_src_w &&
 	    rec->dst_x + rec->dst_width <= pipe_config->pipe_src_w &&
 	    rec->dst_y < pipe_config->pipe_src_h &&

[PATCH 5.10 45/74] ASoC: fsl: Add missing error handling in pcm030_fabric_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

commit fb25621da5702c104ce0a48de5b174ced09e5b4e upstream.

Add the missing platform_device_put() and platform_device_del()
before return from pcm030_fabric_probe in the error handling case.

Fixes: c912fa913446 ("ASoC: fsl: register the wm9712-codec")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220127131336.30214-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/fsl/pcm030-audio-fabric.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/sound/soc/fsl/pcm030-audio-fabric.c
+++ b/sound/soc/fsl/pcm030-audio-fabric.c
@@ -93,16 +93,21 @@ static int pcm030_fabric_probe(struct pl
 		dev_err(&op->dev, "platform_device_alloc() failed\n");
 
 	ret = platform_device_add(pdata->codec_device);
-	if (ret)
+	if (ret) {
 		dev_err(&op->dev, "platform_device_add() failed: %d\n", ret);
+		platform_device_put(pdata->codec_device);
+	}
 
 	ret = snd_soc_register_card(card);
-	if (ret)
+	if (ret) {
 		dev_err(&op->dev, "snd_soc_register_card() failed: %d\n", ret);
+		platform_device_del(pdata->codec_device);
+		platform_device_put(pdata->codec_device);
+	}
 
 	platform_set_drvdata(op, pdata);
-
 	return ret;
+
 }
 
 static int pcm030_fabric_remove(struct platform_device *op)

[PATCH 5.10 46/74] ASoC: xilinx: xlnx_formatter_pcm: Make buffer bytes multiple of period bytes

[Greg Kroah-Hartman]

From: Robert Hancock <robert.hancock@calian.com>

commit e958b5884725dac86d36c1e7afe5a55f31feb0b2 upstream.

This patch is based on one in the Xilinx kernel tree, "ASoc: xlnx: Make
buffer bytes multiple of period bytes" by Devarsh Thakkar. The same
issue exists in the mainline version of the driver. The original
patch description is as follows:

"The Xilinx Audio Formatter IP has a constraint on period
bytes to be multiple of 64. This leads to driver changing
the period size to suitable frames such that period bytes
are multiple of 64.

Now since period bytes and period size are updated but not
the buffer bytes, this may make the buffer bytes unaligned
and not multiple of period bytes.

When this happens we hear popping noise as while DMA is being
done the buffer bytes are not enough to complete DMA access
for last period of frame within the application buffer boundary.

To avoid this, align buffer bytes too as multiple of 64, and
set another constraint to always enforce number of periods as
integer. Now since, there is already a rule in alsa core
to enforce Buffer size = Number of Periods * Period Size
this automatically aligns buffer bytes as multiple of period
bytes."

Fixes: 6f6c3c36f091 ("ASoC: xlnx: add pcm formatter platform driver")
Cc: Devarsh Thakkar <devarsh.thakkar@xilinx.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220107214711.1100162-2-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/xilinx/xlnx_formatter_pcm.c |   27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

--- a/sound/soc/xilinx/xlnx_formatter_pcm.c
+++ b/sound/soc/xilinx/xlnx_formatter_pcm.c
@@ -37,6 +37,7 @@
 #define XLNX_AUD_XFER_COUNT	0x28
 #define XLNX_AUD_CH_STS_START	0x2C
 #define XLNX_BYTES_PER_CH	0x44
+#define XLNX_AUD_ALIGN_BYTES	64
 
 #define AUD_STS_IOC_IRQ_MASK	BIT(31)
 #define AUD_STS_CH_STS_MASK	BIT(29)
@@ -368,12 +369,32 @@ static int xlnx_formatter_pcm_open(struc
 	snd_soc_set_runtime_hwparams(substream, &xlnx_pcm_hardware);
 	runtime->private_data = stream_data;
 
-	/* Resize the period size divisible by 64 */
+	/* Resize the period bytes as divisible by 64 */
 	err = snd_pcm_hw_constraint_step(runtime, 0,
-					 SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 64);
+					 SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
+					 XLNX_AUD_ALIGN_BYTES);
 	if (err) {
 		dev_err(component->dev,
-			"unable to set constraint on period bytes\n");
+			"Unable to set constraint on period bytes\n");
+		return err;
+	}
+
+	/* Resize the buffer bytes as divisible by 64 */
+	err = snd_pcm_hw_constraint_step(runtime, 0,
+					 SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
+					 XLNX_AUD_ALIGN_BYTES);
+	if (err) {
+		dev_err(component->dev,
+			"Unable to set constraint on buffer bytes\n");
+		return err;
+	}
+
+	/* Set periods as integer multiple */
+	err = snd_pcm_hw_constraint_integer(runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (err < 0) {
+		dev_err(component->dev,
+			"Unable to set constraint on periods to be integer\n");
 		return err;
 	}
 

[PATCH 5.10 47/74] ASoC: cpcap: Check for NULL pointer after calling of_get_child_by_name

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

commit f7a6021aaf02088870559f82fc13c58cda7fea1a upstream.

If the device does not exist, of_get_child_by_name() will return NULL
pointer.
And devm_snd_soc_register_component() does not check it.
Also, I have noticed that cpcap_codec_driver has not been used yet.
Therefore, it should be better to check it in order to avoid the future
dereference of the NULL pointer.

Fixes: f6cdf2d3445d ("ASoC: cpcap: new codec")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220111025048.524134-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/codecs/cpcap.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/soc/codecs/cpcap.c
+++ b/sound/soc/codecs/cpcap.c
@@ -1544,6 +1544,8 @@ static int cpcap_codec_probe(struct plat
 {
 	struct device_node *codec_node =
 		of_get_child_by_name(pdev->dev.parent->of_node, "audio-codec");
+	if (!codec_node)
+		return -ENODEV;
 
 	pdev->dev.of_node = codec_node;
 

[PATCH 5.10 48/74] ASoC: max9759: fix underflow in speaker_gain_control_put()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 4c907bcd9dcd233da6707059d777ab389dcbd964 upstream.

Check for negative values of "priv->gain" to prevent an out of bounds
access.  The concern is that these might come from the user via:
  -> snd_ctl_elem_write_user()
    -> snd_ctl_elem_write()
      -> kctl->put()

Fixes: fa8d915172b8 ("ASoC: max9759: Add Amplifier Driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220119123101.GA9509@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/codecs/max9759.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/sound/soc/codecs/max9759.c
+++ b/sound/soc/codecs/max9759.c
@@ -64,7 +64,8 @@ static int speaker_gain_control_put(stru
 	struct snd_soc_component *c = snd_soc_kcontrol_component(kcontrol);
 	struct max9759 *priv = snd_soc_component_get_drvdata(c);
 
-	if (ucontrol->value.integer.value[0] > 3)
+	if (ucontrol->value.integer.value[0] < 0 ||
+	    ucontrol->value.integer.value[0] > 3)
 		return -EINVAL;
 
 	priv->gain = ucontrol->value.integer.value[0];

[PATCH 5.10 49/74] pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

commit e12963c453263d5321a2c610e98cbc731233b685 upstream.

The commit af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer
when switching to GPIO") hadn't taken into account an update of the IRQ
flags scenario.

When updating the IRQ flags on the preconfigured line the ->irq_set_type()
is called again. In such case the sequential Rx buffer configuration
changes may trigger a falling or rising edge interrupt that may lead,
on some platforms, to an undesired event.

This may happen because each of intel_gpio_set_gpio_mode() and
__intel_gpio_set_direction() updates the pad configuration with a different
value of the GPIORXDIS bit. Notable, that the intel_gpio_set_gpio_mode() is
called only for the pads that are configured as an input. Due to this fact,
integrate the logic of __intel_gpio_set_direction() call into the
intel_gpio_set_gpio_mode() so that the Rx buffer won't be disabled and
immediately re-enabled.

Fixes: af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO")
Reported-by: Kane Chen <kane.chen@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Grace Kao <grace.kao@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pinctrl/intel/pinctrl-intel.c |   10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -441,8 +441,8 @@ static void intel_gpio_set_gpio_mode(voi
 	value &= ~PADCFG0_PMODE_MASK;
 	value |= PADCFG0_PMODE_GPIO;
 
-	/* Disable input and output buffers */
-	value |= PADCFG0_GPIORXDIS;
+	/* Disable TX buffer and enable RX (this will be input) */
+	value &= ~PADCFG0_GPIORXDIS;
 	value |= PADCFG0_GPIOTXDIS;
 
 	/* Disable SCI/SMI/NMI generation */
@@ -487,9 +487,6 @@ static int intel_gpio_request_enable(str
 
 	intel_gpio_set_gpio_mode(padcfg0);
 
-	/* Disable TX buffer and enable RX (this will be input) */
-	__intel_gpio_set_direction(padcfg0, true);
-
 	raw_spin_unlock_irqrestore(&pctrl->lock, flags);
 
 	return 0;
@@ -1105,9 +1102,6 @@ static int intel_gpio_irq_type(struct ir
 
 	intel_gpio_set_gpio_mode(reg);
 
-	/* Disable TX buffer and enable RX (this will be input) */
-	__intel_gpio_set_direction(reg, true);
-
 	value = readl(reg);
 
 	value &= ~(PADCFG0_RXEVCFG_MASK | PADCFG0_RXINV);

[PATCH 5.10 50/74] pinctrl: intel: fix unexpected interrupt

[Greg Kroah-Hartman]

From: Łukasz Bartosik <lb@semihalf.com>

commit e986f0e602f19ecb7880b04dd1db415ed9bca3f6 upstream.

ASUS Chromebook C223 with Celeron N3350 crashes sometimes during
cold booot. Inspection of the kernel log showed that it gets into
an inifite loop logging the following message:

->handle_irq():  000000009cdb51e8, handle_bad_irq+0x0/0x251
->irq_data.chip(): 000000005ec212a7, 0xffffa043009d8e7
->action(): 00000
   IRQ_NOPROBE set
unexpected IRQ trap at vector 7c

The issue happens during cold boot but only if cold boot happens
at most several dozen seconds after Chromebook is powered off. For
longer intervals between power off and power on (cold boot) the issue
does not reproduce. The unexpected interrupt is sourced from INT3452
GPIO pin which is used for SD card detect. Investigation relevealed
that when the interval between power off and power on (cold boot)
is less than several dozen seconds then values of INT3452 GPIO interrupt
enable and interrupt pending registers survive power off and power
on sequence and interrupt for SD card detect pin is enabled and pending
during probe of SD controller which causes the unexpected IRQ message.
"Intel Pentium and Celeron Processor N- and J- Series" volume 3 doc
mentions that GPIO interrupt enable and status registers default
value is 0x0.
The fix clears INT3452 GPIO interrupt enabled and interrupt pending
registers in its probe function.

Fixes: 7981c0015af2 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support")
Signed-off-by: Łukasz Bartosik <lb@semihalf.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pinctrl/intel/pinctrl-intel.c |   54 +++++++++++++++++++++-------------
 1 file changed, 34 insertions(+), 20 deletions(-)

--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -1201,6 +1201,39 @@ static irqreturn_t intel_gpio_irq(int ir
 	return IRQ_RETVAL(ret);
 }
 
+static void intel_gpio_irq_init(struct intel_pinctrl *pctrl)
+{
+	int i;
+
+	for (i = 0; i < pctrl->ncommunities; i++) {
+		const struct intel_community *community;
+		void __iomem *base;
+		unsigned int gpp;
+
+		community = &pctrl->communities[i];
+		base = community->regs;
+
+		for (gpp = 0; gpp < community->ngpps; gpp++) {
+			/* Mask and clear all interrupts */
+			writel(0, base + community->ie_offset + gpp * 4);
+			writel(0xffff, base + community->is_offset + gpp * 4);
+		}
+	}
+}
+
+static int intel_gpio_irq_init_hw(struct gpio_chip *gc)
+{
+	struct intel_pinctrl *pctrl = gpiochip_get_data(gc);
+
+	/*
+	 * Make sure the interrupt lines are in a proper state before
+	 * further configuration.
+	 */
+	intel_gpio_irq_init(pctrl);
+
+	return 0;
+}
+
 static int intel_gpio_add_community_ranges(struct intel_pinctrl *pctrl,
 				const struct intel_community *community)
 {
@@ -1305,6 +1338,7 @@ static int intel_gpio_probe(struct intel
 	girq->num_parents = 0;
 	girq->default_type = IRQ_TYPE_NONE;
 	girq->handler = handle_bad_irq;
+	girq->init_hw = intel_gpio_irq_init_hw;
 
 	ret = devm_gpiochip_add_data(pctrl->dev, &pctrl->chip, pctrl);
 	if (ret) {
@@ -1634,26 +1668,6 @@ int intel_pinctrl_suspend_noirq(struct d
 }
 EXPORT_SYMBOL_GPL(intel_pinctrl_suspend_noirq);
 
-static void intel_gpio_irq_init(struct intel_pinctrl *pctrl)
-{
-	size_t i;
-
-	for (i = 0; i < pctrl->ncommunities; i++) {
-		const struct intel_community *community;
-		void __iomem *base;
-		unsigned int gpp;
-
-		community = &pctrl->communities[i];
-		base = community->regs;
-
-		for (gpp = 0; gpp < community->ngpps; gpp++) {
-			/* Mask and clear all interrupts */
-			writel(0, base + community->ie_offset + gpp * 4);
-			writel(0xffff, base + community->is_offset + gpp * 4);
-		}
-	}
-}
-
 static bool intel_gpio_update_reg(void __iomem *reg, u32 mask, u32 value)
 {
 	u32 curr, updated;

[PATCH 5.10 51/74] pinctrl: bcm2835: Fix a few error paths

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

commit 5297c693d8c8e08fa742e3112cf70723f7a04da2 upstream.

After commit 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio
hogs") a few error paths would not unwind properly the registration of
gpio ranges. Correct that by assigning a single error label and goto it
whenever we encounter a fatal error.

Fixes: 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220127215033.267227-1-f.fainelli@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pinctrl/bcm/pinctrl-bcm2835.c |   23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -1264,16 +1264,18 @@ static int bcm2835_pinctrl_probe(struct
 				     sizeof(*girq->parents),
 				     GFP_KERNEL);
 	if (!girq->parents) {
-		pinctrl_remove_gpio_range(pc->pctl_dev, &pc->gpio_range);
-		return -ENOMEM;
+		err = -ENOMEM;
+		goto out_remove;
 	}
 
 	if (is_7211) {
 		pc->wake_irq = devm_kcalloc(dev, BCM2835_NUM_IRQS,
 					    sizeof(*pc->wake_irq),
 					    GFP_KERNEL);
-		if (!pc->wake_irq)
-			return -ENOMEM;
+		if (!pc->wake_irq) {
+			err = -ENOMEM;
+			goto out_remove;
+		}
 	}
 
 	/*
@@ -1297,8 +1299,10 @@ static int bcm2835_pinctrl_probe(struct
 
 		len = strlen(dev_name(pc->dev)) + 16;
 		name = devm_kzalloc(pc->dev, len, GFP_KERNEL);
-		if (!name)
-			return -ENOMEM;
+		if (!name) {
+			err = -ENOMEM;
+			goto out_remove;
+		}
 
 		snprintf(name, len, "%s:bank%d", dev_name(pc->dev), i);
 
@@ -1317,11 +1321,14 @@ static int bcm2835_pinctrl_probe(struct
 	err = gpiochip_add_data(&pc->gpio_chip, pc);
 	if (err) {
 		dev_err(dev, "could not add GPIO chip\n");
-		pinctrl_remove_gpio_range(pc->pctl_dev, &pc->gpio_range);
-		return err;
+		goto out_remove;
 	}
 
 	return 0;
+
+out_remove:
+	pinctrl_remove_gpio_range(pc->pctl_dev, &pc->gpio_range);
+	return err;
 }
 
 static struct platform_driver bcm2835_pinctrl_driver = {

[PATCH 5.10 52/74] scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe

[Greg Kroah-Hartman]

From: John Meneghini <jmeneghi@redhat.com>

commit 936bd03405fc83ba039d42bc93ffd4b88418f1d3 upstream.

Running tests with a debug kernel shows that bnx2fc_recv_frame() is
modifying the per_cpu lport stats counters in a non-mpsafe way.  Just boot
a debug kernel and run the bnx2fc driver with the hardware enabled.

[ 1391.699147] BUG: using smp_processor_id() in preemptible [00000000] code: bnx2fc_
[ 1391.699160] caller is bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699174] CPU: 2 PID: 4355 Comm: bnx2fc_l2_threa Kdump: loaded Tainted: G    B
[ 1391.699180] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013
[ 1391.699183] Call Trace:
[ 1391.699188]  dump_stack_lvl+0x57/0x7d
[ 1391.699198]  check_preemption_disabled+0xc8/0xd0
[ 1391.699205]  bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699215]  ? do_raw_spin_trylock+0xb5/0x180
[ 1391.699221]  ? bnx2fc_npiv_create_vports.isra.0+0x4e0/0x4e0 [bnx2fc]
[ 1391.699229]  ? bnx2fc_l2_rcv_thread+0xb7/0x3a0 [bnx2fc]
[ 1391.699240]  bnx2fc_l2_rcv_thread+0x1af/0x3a0 [bnx2fc]
[ 1391.699250]  ? bnx2fc_ulp_init+0xc0/0xc0 [bnx2fc]
[ 1391.699258]  kthread+0x364/0x420
[ 1391.699263]  ? _raw_spin_unlock_irq+0x24/0x50
[ 1391.699268]  ? set_kthread_struct+0x100/0x100
[ 1391.699273]  ret_from_fork+0x22/0x30

Restore the old get_cpu/put_cpu code with some modifications to reduce the
size of the critical section.

Link: https://lore.kernel.org/r/20220124145110.442335-1-jmeneghi@redhat.com
Fixes: d576a5e80cd0 ("bnx2fc: Improve stats update mechanism")
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c |   21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -506,7 +506,8 @@ static int bnx2fc_l2_rcv_thread(void *ar
 
 static void bnx2fc_recv_frame(struct sk_buff *skb)
 {
-	u32 fr_len;
+	u64 crc_err;
+	u32 fr_len, fr_crc;
 	struct fc_lport *lport;
 	struct fcoe_rcv_info *fr;
 	struct fc_stats *stats;
@@ -540,6 +541,11 @@ static void bnx2fc_recv_frame(struct sk_
 	skb_pull(skb, sizeof(struct fcoe_hdr));
 	fr_len = skb->len - sizeof(struct fcoe_crc_eof);
 
+	stats = per_cpu_ptr(lport->stats, get_cpu());
+	stats->RxFrames++;
+	stats->RxWords += fr_len / FCOE_WORD_TO_BYTE;
+	put_cpu();
+
 	fp = (struct fc_frame *)skb;
 	fc_frame_init(fp);
 	fr_dev(fp) = lport;
@@ -622,16 +628,15 @@ static void bnx2fc_recv_frame(struct sk_
 		return;
 	}
 
-	stats = per_cpu_ptr(lport->stats, smp_processor_id());
-	stats->RxFrames++;
-	stats->RxWords += fr_len / FCOE_WORD_TO_BYTE;
+	fr_crc = le32_to_cpu(fr_crc(fp));
 
-	if (le32_to_cpu(fr_crc(fp)) !=
-			~crc32(~0, skb->data, fr_len)) {
-		if (stats->InvalidCRCCount < 5)
+	if (unlikely(fr_crc != ~crc32(~0, skb->data, fr_len))) {
+		stats = per_cpu_ptr(lport->stats, get_cpu());
+		crc_err = (stats->InvalidCRCCount++);
+		put_cpu();
+		if (crc_err < 5)
 			printk(KERN_WARNING PFX "dropping frame with "
 			       "CRC error\n");
-		stats->InvalidCRCCount++;
 		kfree_skb(skb);
 		return;
 	}

[PATCH 5.10 53/74] nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client.

[Greg Kroah-Hartman]

From: Dai Ngo <dai.ngo@oracle.com>

commit ab451ea952fe9d7afefae55ddb28943a148247fe upstream.

>From RFC 7530 Section 16.34.5:

o  The server has not recorded an unconfirmed { v, x, c, *, * } and
   has recorded a confirmed { v, x, c, *, s }.  If the principals of
   the record and of SETCLIENTID_CONFIRM do not match, the server
   returns NFS4ERR_CLID_INUSE without removing any relevant leased
   client state, and without changing recorded callback and
   callback_ident values for client { x }.

The current code intends to do what the spec describes above but
it forgot to set 'old' to NULL resulting to the confirmed client
to be expired.

Fixes: 2b63482185e6 ("nfsd: fix clid_inuse on mount with security change")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfsd/nfs4state.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -4047,8 +4047,10 @@ nfsd4_setclientid_confirm(struct svc_rqs
 			status = nfserr_clid_inuse;
 			if (client_has_state(old)
 					&& !same_creds(&unconf->cl_cred,
-							&old->cl_cred))
+							&old->cl_cred)) {
+				old = NULL;
 				goto out;
+			}
 			status = mark_client_expired_locked(old);
 			if (status) {
 				old = NULL;

[PATCH 5.10 54/74] gve: fix the wrong AdminQ buffer queue index check

[Greg Kroah-Hartman]

From: Haiyue Wang <haiyue.wang@intel.com>

commit 1f84a9450d75e08af70d9e2f2d5e1c0ac0c881d2 upstream.

The 'tail' and 'head' are 'unsigned int' type free-running count, when
'head' is overflow, the 'int i (= tail) < u32 head' will be false:

Only '- loop 0: idx = 63' result is shown, so it needs to use 'int' type
to compare, it can handle the overflow correctly.

typedef uint32_t u32;

int main()
{
        u32 tail, head;
        int stail, shead;
        int i, loop;

        tail = 0xffffffff;
        head = 0x00000000;

        for (i = tail, loop = 0; i < head; i++) {
                unsigned int idx = i & 63;

                printf("+ loop %d: idx = %u\n", loop++, idx);
        }

        stail = tail;
        shead = head;
        for (i = stail, loop = 0; i < shead; i++) {
                unsigned int idx = i & 63;

                printf("- loop %d: idx = %u\n", loop++, idx);
        }

        return 0;
}

Fixes: 5cdad90de62c ("gve: Batch AQ commands for creating and destroying queues.")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/google/gve/gve_adminq.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -141,7 +141,7 @@ static int gve_adminq_parse_err(struct g
  */
 static int gve_adminq_kick_and_wait(struct gve_priv *priv)
 {
-	u32 tail, head;
+	int tail, head;
 	int i;
 
 	tail = ioread32be(&priv->reg_bar0->adminq_event_counter);

[PATCH 5.10 55/74] bpf: Use VM_MAP instead of VM_ALLOC for ringbuf

[Greg Kroah-Hartman]

From: Hou Tao <hotforest@gmail.com>

commit b293dcc473d22a62dc6d78de2b15e4f49515db56 upstream.

After commit 2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages
after mapping"), non-VM_ALLOC mappings will be marked as accessible
in __get_vm_area_node() when KASAN is enabled. But now the flag for
ringbuf area is VM_ALLOC, so KASAN will complain out-of-bound access
after vmap() returns. Because the ringbuf area is created by mapping
allocated pages, so use VM_MAP instead.

After the change, info in /proc/vmallocinfo also changes from
  [start]-[end]   24576 ringbuf_map_alloc+0x171/0x290 vmalloc user
to
  [start]-[end]   24576 ringbuf_map_alloc+0x171/0x290 vmap user

Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: syzbot+5ad567a418794b9b5983@syzkaller.appspotmail.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220202060158.6260-1-houtao1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/bpf/ringbuf.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/bpf/ringbuf.c
+++ b/kernel/bpf/ringbuf.c
@@ -108,7 +108,7 @@ static struct bpf_ringbuf *bpf_ringbuf_a
 	}
 
 	rb = vmap(pages, nr_meta_pages + 2 * nr_data_pages,
-		  VM_ALLOC | VM_USERMAP, PAGE_KERNEL);
+		  VM_MAP | VM_USERMAP, PAGE_KERNEL);
 	if (rb) {
 		kmemleak_not_leak(pages);
 		rb->pages = pages;

[PATCH 5.10 56/74] selftests/exec: Remove pipe from TEST_GEN_FILES

[Greg Kroah-Hartman]

From: Muhammad Usama Anjum <usama.anjum@collabora.com>

commit 908a26e139e8cf21093acc56d8e90ddad2ad1eff upstream.

pipe named FIFO special file is being created in execveat.c to perform
some tests. Makefile doesn't need to do anything with the pipe. When it
isn't found, Makefile generates the following build error:

make: *** No rule to make target
'../tools/testing/selftests/exec/pipe', needed by 'all'.  Stop.

pipe is created and removed during test run-time.

Amended change log to add pipe remove info:
Shuah Khan <skhan@linuxfoundation.org>

Fixes: 61016db15b8e ("selftests/exec: Verify execve of non-regular files fail")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/exec/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/testing/selftests/exec/Makefile
+++ b/tools/testing/selftests/exec/Makefile
@@ -5,7 +5,7 @@ CFLAGS += -D_GNU_SOURCE
 
 TEST_PROGS := binfmt_script non-regular
 TEST_GEN_PROGS := execveat load_address_4096 load_address_2097152 load_address_16777216
-TEST_GEN_FILES := execveat.symlink execveat.denatured script subdir pipe
+TEST_GEN_FILES := execveat.symlink execveat.denatured script subdir
 # Makefile is a run-time dependency, since it's accessed by the execveat test
 TEST_FILES := Makefile
 

[PATCH 5.10 57/74] selftests: futex: Use variable MAKE instead of make

[Greg Kroah-Hartman]

From: Muhammad Usama Anjum <usama.anjum@collabora.com>

commit b9199181a9ef8252e47e207be8c23e1f50662620 upstream.

Recursive make commands should always use the variable MAKE, not the
explicit command name ‘make’. This has benefits and removes the
following warning when multiple jobs are used for the build:

make[2]: warning: jobserver unavailable: using -j1.  Add '+' to parent make rule.

Fixes: a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/futex/Makefile |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/tools/testing/selftests/futex/Makefile
+++ b/tools/testing/selftests/futex/Makefile
@@ -11,7 +11,7 @@ all:
 	@for DIR in $(SUBDIRS); do		\
 		BUILD_TARGET=$(OUTPUT)/$$DIR;	\
 		mkdir $$BUILD_TARGET  -p;	\
-		make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
+		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
 		if [ -e $$DIR/$(TEST_PROGS) ]; then \
 			rsync -a $$DIR/$(TEST_PROGS) $$BUILD_TARGET/; \
 		fi \
@@ -32,6 +32,6 @@ override define CLEAN
 	@for DIR in $(SUBDIRS); do		\
 		BUILD_TARGET=$(OUTPUT)/$$DIR;	\
 		mkdir $$BUILD_TARGET  -p;	\
-		make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
+		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
 	done
 endef

[PATCH 5.10 58/74] tools/resolve_btfids: Do not print any commands when building silently

[Greg Kroah-Hartman]

From: Nathan Chancellor <nathan@kernel.org>

commit 7f3bdbc3f13146eb9d07de81ea71f551587a384b upstream.

When building with 'make -s', there is some output from resolve_btfids:

$ make -sj"$(nproc)" oldconfig prepare
  MKDIR     .../tools/bpf/resolve_btfids/libbpf/
  MKDIR     .../tools/bpf/resolve_btfids//libsubcmd
  LINK     resolve_btfids

Silent mode means that no information should be emitted about what is
currently being done. Use the $(silent) variable from Makefile.include
to avoid defining the msg macro so that there is no information printed.

Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220201212503.731732-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/bpf/resolve_btfids/Makefile |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/tools/bpf/resolve_btfids/Makefile
+++ b/tools/bpf/resolve_btfids/Makefile
@@ -9,7 +9,11 @@ ifeq ($(V),1)
   msg =
 else
   Q = @
-  msg = @printf '  %-8s %s%s\n' "$(1)" "$(notdir $(2))" "$(if $(3), $(3))";
+  ifeq ($(silent),1)
+    msg =
+  else
+    msg = @printf '  %-8s %s%s\n' "$(1)" "$(notdir $(2))" "$(if $(3), $(3))";
+  endif
   MAKEFLAGS=--no-print-directory
 endif
 

[PATCH 5.10 59/74] rtc: cmos: Evaluate century appropriate

[Greg Kroah-Hartman]

From: Riwen Lu <luriwen@kylinos.cn>

commit ff164ae39b82ee483b24579c8e22a13a8ce5bd04 upstream.

There's limiting the year to 2069. When setting the rtc year to 2070,
reading it returns 1970. Evaluate century starting from 19 to count the
correct year.

$ sudo date -s 20700106
Mon 06 Jan 2070 12:00:00 AM CST
$ sudo hwclock -w
$ sudo hwclock -r
1970-01-06 12:00:49.604968+08:00

Fixes: 2a4daadd4d3e5071 ("rtc: cmos: ignore bogus century byte")

Signed-off-by: Riwen Lu <luriwen@kylinos.cn>
Acked-by: Eric Wong <e@80x24.org>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220106084609.1223688-1-luriwen@kylinos.cn
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> # preparation for stable
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-mc146818-lib.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/rtc/rtc-mc146818-lib.c
+++ b/drivers/rtc/rtc-mc146818-lib.c
@@ -83,7 +83,7 @@ unsigned int mc146818_get_time(struct rt
 	time->tm_year += real_year - 72;
 #endif
 
-	if (century > 20)
+	if (century > 19)
 		time->tm_year += (century - 19) * 100;
 
 	/*

[PATCH 5.10 60/74] Revert "fbcon: Disable accelerated scrolling"

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

commit 87ab9f6b7417349aa197a6c7098d4fdd4beebb74 upstream.

This reverts commit 39aead8373b3c20bb5965c024dfb51a94e526151.

Revert the first (of 2) commits which disabled scrolling acceleration in
fbcon/fbdev.  It introduced a regression for fbdev-supported graphic cards
because of the performance penalty by doing screen scrolling by software
instead of using the existing graphic card 2D hardware acceleration.

Console scrolling acceleration was disabled by dropping code which
checked at runtime the driver hardware capabilities for the
BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it
enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move
screen contents.  After dropping those checks scrollmode was hard-wired
to SCROLL_REDRAW instead, which forces all graphic cards to redraw every
character at the new screen position when scrolling.

This change effectively disabled all hardware-based scrolling acceleration for
ALL drivers, because now all kind of 2D hardware acceleration (bitblt,
fillrect) in the drivers isn't used any longer.

The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm
and gma500) used hardware acceleration in the past and thus code for checking
and using scrolling acceleration is obsolete.

This statement is NOT TRUE, because beside the DRM drivers there are around 35
other fbdev drivers which depend on fbdev/fbcon and still provide hardware
acceleration for fbdev/fbcon.

The original commit message also states that syzbot found lots of bugs in fbcon
and thus it's "often the solution to just delete code and remove features".
This is true, and the bugs - which actually affected all users of fbcon,
including DRM - were fixed, or code was dropped like e.g. the support for
software scrollback in vgacon (commit 973c096f6a85).

So to further analyze which bugs were found by syzbot, I've looked through all
patches in drivers/video which were tagged with syzbot or syzkaller back to
year 2005. The vast majority fixed the reported issues on a higher level, e.g.
when screen is to be resized, or when font size is to be changed. The few ones
which touched driver code fixed a real driver bug, e.g. by adding a check.

But NONE of those patches touched code of either the SCROLL_MOVE or the
SCROLL_REDRAW case.

That means, there was no real reason why SCROLL_MOVE had to be ripped-out and
just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far
was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it
could go away. That argument completely missed the fact that SCROLL_MOVE is
still heavily used by fbdev (non-DRM) drivers.

Some people mention that using memcpy() instead of the hardware acceleration is
pretty much the same speed. But that's not true, at least not for older graphic
cards and machines where we see speed decreases by factor 10 and more and thus
this change leads to console responsiveness way worse than before.

That's why the original commit is to be reverted. By reverting we
reintroduce hardware-based scrolling acceleration and fix the
performance regression for fbdev drivers.

There isn't any impact on DRM when reverting those patches.

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-3-deller@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/gpu/todo.rst       |   18 ---------------
 drivers/video/fbdev/core/fbcon.c |   45 ++++++++++++++++++++++++++++++++-------
 2 files changed, 37 insertions(+), 26 deletions(-)

--- a/Documentation/gpu/todo.rst
+++ b/Documentation/gpu/todo.rst
@@ -273,24 +273,6 @@ Contact: Daniel Vetter, Noralf Tronnes
 
 Level: Advanced
 
-Garbage collect fbdev scrolling acceleration
---------------------------------------------
-
-Scroll acceleration is disabled in fbcon by hard-wiring p->scrollmode =
-SCROLL_REDRAW. There's a ton of code this will allow us to remove:
-- lots of code in fbcon.c
-- a bunch of the hooks in fbcon_ops, maybe the remaining hooks could be called
-  directly instead of the function table (with a switch on p->rotate)
-- fb_copyarea is unused after this, and can be deleted from all drivers
-
-Note that not all acceleration code can be deleted, since clearing and cursor
-support is still accelerated, which might be good candidates for further
-deletion projects.
-
-Contact: Daniel Vetter
-
-Level: Intermediate
-
 idr_init_base()
 ---------------
 
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -1033,7 +1033,7 @@ static void fbcon_init(struct vc_data *v
 	struct vc_data *svc = *default_mode;
 	struct fbcon_display *t, *p = &fb_display[vc->vc_num];
 	int logo = 1, new_rows, new_cols, rows, cols, charcnt = 256;
-	int ret;
+	int cap, ret;
 
 	if (WARN_ON(info_idx == -1))
 	    return;
@@ -1042,6 +1042,7 @@ static void fbcon_init(struct vc_data *v
 		con2fb_map[vc->vc_num] = info_idx;
 
 	info = registered_fb[con2fb_map[vc->vc_num]];
+	cap = info->flags;
 
 	if (logo_shown < 0 && console_loglevel <= CONSOLE_LOGLEVEL_QUIET)
 		logo_shown = FBCON_LOGO_DONTSHOW;
@@ -1146,13 +1147,11 @@ static void fbcon_init(struct vc_data *v
 
 	ops->graphics = 0;
 
-	/*
-	 * No more hw acceleration for fbcon.
-	 *
-	 * FIXME: Garbage collect all the now dead code after sufficient time
-	 * has passed.
-	 */
-	p->scrollmode = SCROLL_REDRAW;
+	if ((cap & FBINFO_HWACCEL_COPYAREA) &&
+	    !(cap & FBINFO_HWACCEL_DISABLED))
+		p->scrollmode = SCROLL_MOVE;
+	else /* default to something safe */
+		p->scrollmode = SCROLL_REDRAW;
 
 	/*
 	 *  ++guenther: console.c:vc_allocate() relies on initializing
@@ -1965,15 +1964,45 @@ static void updatescrollmode(struct fbco
 {
 	struct fbcon_ops *ops = info->fbcon_par;
 	int fh = vc->vc_font.height;
+	int cap = info->flags;
+	u16 t = 0;
+	int ypan = FBCON_SWAP(ops->rotate, info->fix.ypanstep,
+				  info->fix.xpanstep);
+	int ywrap = FBCON_SWAP(ops->rotate, info->fix.ywrapstep, t);
 	int yres = FBCON_SWAP(ops->rotate, info->var.yres, info->var.xres);
 	int vyres = FBCON_SWAP(ops->rotate, info->var.yres_virtual,
 				   info->var.xres_virtual);
+	int good_pan = (cap & FBINFO_HWACCEL_YPAN) &&
+		divides(ypan, vc->vc_font.height) && vyres > yres;
+	int good_wrap = (cap & FBINFO_HWACCEL_YWRAP) &&
+		divides(ywrap, vc->vc_font.height) &&
+		divides(vc->vc_font.height, vyres) &&
+		divides(vc->vc_font.height, yres);
+	int reading_fast = cap & FBINFO_READS_FAST;
+	int fast_copyarea = (cap & FBINFO_HWACCEL_COPYAREA) &&
+		!(cap & FBINFO_HWACCEL_DISABLED);
+	int fast_imageblit = (cap & FBINFO_HWACCEL_IMAGEBLIT) &&
+		!(cap & FBINFO_HWACCEL_DISABLED);
 
 	p->vrows = vyres/fh;
 	if (yres > (fh * (vc->vc_rows + 1)))
 		p->vrows -= (yres - (fh * vc->vc_rows)) / fh;
 	if ((yres % fh) && (vyres % fh < yres % fh))
 		p->vrows--;
+
+	if (good_wrap || good_pan) {
+		if (reading_fast || fast_copyarea)
+			p->scrollmode = good_wrap ?
+				SCROLL_WRAP_MOVE : SCROLL_PAN_MOVE;
+		else
+			p->scrollmode = good_wrap ? SCROLL_REDRAW :
+				SCROLL_PAN_REDRAW;
+	} else {
+		if (reading_fast || (fast_copyarea && !fast_imageblit))
+			p->scrollmode = SCROLL_MOVE;
+		else
+			p->scrollmode = SCROLL_REDRAW;
+	}
 }
 
 #define PITCH(w) (((w) + 7) >> 3)

[PATCH 5.10 61/74] fbcon: Add option to enable legacy hardware acceleration

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

commit a3f781a9d6114c1d1e01defb7aa234dec45d2a5f upstream.

Add a config option CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION to
enable bitblt and fillrect hardware acceleration in the framebuffer
console. If disabled, such acceleration will not be used, even if it is
supported by the graphics hardware driver.

If you plan to use DRM as your main graphics output system, you should
disable this option since it will prevent compiling in code which isn't
used later on when DRM takes over.

For all other configurations, e.g. if none of your graphic cards support
DRM (yet), DRM isn't available for your architecture, or you can't be
sure that the graphic card in the target system will support DRM, you
most likely want to enable this option.

In the non-accelerated case (e.g. when DRM is used), the inlined
fb_scrollmode() function is hardcoded to return SCROLL_REDRAW and as such the
compiler is able to optimize much unneccesary code away.

In this v3 patch version I additionally changed the GETVYRES() and GETVXRES()
macros to take a pointer to the fbcon_display struct. This fixes the build when
console rotation is enabled and helps the compiler again to optimize out code.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-4-deller@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/console/Kconfig           |   20 ++++++++++++++++
 drivers/video/fbdev/core/fbcon.c        |   39 ++++++++++++++++++++++----------
 drivers/video/fbdev/core/fbcon.h        |   15 +++++++++++-
 drivers/video/fbdev/core/fbcon_ccw.c    |   10 ++++----
 drivers/video/fbdev/core/fbcon_cw.c     |   10 ++++----
 drivers/video/fbdev/core/fbcon_rotate.h |    4 +--
 drivers/video/fbdev/core/fbcon_ud.c     |   20 ++++++++--------
 7 files changed, 84 insertions(+), 34 deletions(-)

--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -78,6 +78,26 @@ config FRAMEBUFFER_CONSOLE
 	help
 	  Low-level framebuffer-based console driver.
 
+config FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
+	bool "Enable legacy fbcon hardware acceleration code"
+	depends on FRAMEBUFFER_CONSOLE
+	default y if PARISC
+	default n
+	help
+	  This option enables the fbcon (framebuffer text-based) hardware
+	  acceleration for graphics drivers which were written for the fbdev
+	  graphics interface.
+
+	  On modern machines, on mainstream machines (like x86-64) or when
+	  using a modern Linux distribution those fbdev drivers usually aren't used.
+	  So enabling this option wouldn't have any effect, which is why you want
+	  to disable this option on such newer machines.
+
+	  If you compile this kernel for older machines which still require the
+	  fbdev drivers, you may want to say Y.
+
+	  If unsure, select n.
+
 config FRAMEBUFFER_CONSOLE_DETECT_PRIMARY
        bool "Map the console to the primary display device"
        depends on FRAMEBUFFER_CONSOLE
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -1147,11 +1147,13 @@ static void fbcon_init(struct vc_data *v
 
 	ops->graphics = 0;
 
+#ifdef CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
 	if ((cap & FBINFO_HWACCEL_COPYAREA) &&
 	    !(cap & FBINFO_HWACCEL_DISABLED))
 		p->scrollmode = SCROLL_MOVE;
 	else /* default to something safe */
 		p->scrollmode = SCROLL_REDRAW;
+#endif
 
 	/*
 	 *  ++guenther: console.c:vc_allocate() relies on initializing
@@ -1717,7 +1719,7 @@ static bool fbcon_scroll(struct vc_data
 			count = vc->vc_rows;
 		if (logo_shown >= 0)
 			goto redraw_up;
-		switch (p->scrollmode) {
+		switch (fb_scrollmode(p)) {
 		case SCROLL_MOVE:
 			fbcon_redraw_blit(vc, info, p, t, b - t - count,
 				     count);
@@ -1807,7 +1809,7 @@ static bool fbcon_scroll(struct vc_data
 			count = vc->vc_rows;
 		if (logo_shown >= 0)
 			goto redraw_down;
-		switch (p->scrollmode) {
+		switch (fb_scrollmode(p)) {
 		case SCROLL_MOVE:
 			fbcon_redraw_blit(vc, info, p, b - 1, b - t - count,
 				     -count);
@@ -1958,12 +1960,12 @@ static void fbcon_bmove_rec(struct vc_da
 		   height, width);
 }
 
-static void updatescrollmode(struct fbcon_display *p,
+static void updatescrollmode_accel(struct fbcon_display *p,
 					struct fb_info *info,
 					struct vc_data *vc)
 {
+#ifdef CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
 	struct fbcon_ops *ops = info->fbcon_par;
-	int fh = vc->vc_font.height;
 	int cap = info->flags;
 	u16 t = 0;
 	int ypan = FBCON_SWAP(ops->rotate, info->fix.ypanstep,
@@ -1984,12 +1986,6 @@ static void updatescrollmode(struct fbco
 	int fast_imageblit = (cap & FBINFO_HWACCEL_IMAGEBLIT) &&
 		!(cap & FBINFO_HWACCEL_DISABLED);
 
-	p->vrows = vyres/fh;
-	if (yres > (fh * (vc->vc_rows + 1)))
-		p->vrows -= (yres - (fh * vc->vc_rows)) / fh;
-	if ((yres % fh) && (vyres % fh < yres % fh))
-		p->vrows--;
-
 	if (good_wrap || good_pan) {
 		if (reading_fast || fast_copyarea)
 			p->scrollmode = good_wrap ?
@@ -2003,6 +1999,27 @@ static void updatescrollmode(struct fbco
 		else
 			p->scrollmode = SCROLL_REDRAW;
 	}
+#endif
+}
+
+static void updatescrollmode(struct fbcon_display *p,
+					struct fb_info *info,
+					struct vc_data *vc)
+{
+	struct fbcon_ops *ops = info->fbcon_par;
+	int fh = vc->vc_font.height;
+	int yres = FBCON_SWAP(ops->rotate, info->var.yres, info->var.xres);
+	int vyres = FBCON_SWAP(ops->rotate, info->var.yres_virtual,
+				   info->var.xres_virtual);
+
+	p->vrows = vyres/fh;
+	if (yres > (fh * (vc->vc_rows + 1)))
+		p->vrows -= (yres - (fh * vc->vc_rows)) / fh;
+	if ((yres % fh) && (vyres % fh < yres % fh))
+		p->vrows--;
+
+	/* update scrollmode in case hardware acceleration is used */
+	updatescrollmode_accel(p, info, vc);
 }
 
 #define PITCH(w) (((w) + 7) >> 3)
@@ -2163,7 +2180,7 @@ static int fbcon_switch(struct vc_data *
 
 	updatescrollmode(p, info, vc);
 
-	switch (p->scrollmode) {
+	switch (fb_scrollmode(p)) {
 	case SCROLL_WRAP_MOVE:
 		scrollback_phys_max = p->vrows - vc->vc_rows;
 		break;
--- a/drivers/video/fbdev/core/fbcon.h
+++ b/drivers/video/fbdev/core/fbcon.h
@@ -29,7 +29,9 @@ struct fbcon_display {
     /* Filled in by the low-level console driver */
     const u_char *fontdata;
     int userfont;                   /* != 0 if fontdata kmalloc()ed */
-    u_short scrollmode;             /* Scroll Method */
+#ifdef CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
+    u_short scrollmode;             /* Scroll Method, use fb_scrollmode() */
+#endif
     u_short inverse;                /* != 0 text black on white as default */
     short yscroll;                  /* Hardware scrolling */
     int vrows;                      /* number of virtual rows */
@@ -208,6 +210,17 @@ static inline int attr_col_ec(int shift,
 #define SCROLL_REDRAW	   0x004
 #define SCROLL_PAN_REDRAW  0x005
 
+static inline u_short fb_scrollmode(struct fbcon_display *fb)
+{
+#ifdef CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
+	return fb->scrollmode;
+#else
+	/* hardcoded to SCROLL_REDRAW if acceleration was disabled. */
+	return SCROLL_REDRAW;
+#endif
+}
+
+
 #ifdef CONFIG_FB_TILEBLITTING
 extern void fbcon_set_tileops(struct vc_data *vc, struct fb_info *info);
 #endif
--- a/drivers/video/fbdev/core/fbcon_ccw.c
+++ b/drivers/video/fbdev/core/fbcon_ccw.c
@@ -65,7 +65,7 @@ static void ccw_bmove(struct vc_data *vc
 {
 	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_copyarea area;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
 
 	area.sx = sy * vc->vc_font.height;
 	area.sy = vyres - ((sx + width) * vc->vc_font.width);
@@ -83,7 +83,7 @@ static void ccw_clear(struct vc_data *vc
 	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_fillrect region;
 	int bgshift = (vc->vc_hi_font_mask) ? 13 : 12;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
 
 	region.color = attr_bgcol_ec(bgshift,vc,info);
 	region.dx = sy * vc->vc_font.height;
@@ -140,7 +140,7 @@ static void ccw_putcs(struct vc_data *vc
 	u32 cnt, pitch, size;
 	u32 attribute = get_attribute(info, scr_readw(s));
 	u8 *dst, *buf = NULL;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -229,7 +229,7 @@ static void ccw_cursor(struct vc_data *v
 	int attribute, use_sw = vc->vc_cursor_type & CUR_SW;
 	int err = 1, dx, dy;
 	char *src;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -387,7 +387,7 @@ static int ccw_update_start(struct fb_in
 {
 	struct fbcon_ops *ops = info->fbcon_par;
 	u32 yoffset;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
 	int err;
 
 	yoffset = (vyres - info->var.yres) - ops->var.xoffset;
--- a/drivers/video/fbdev/core/fbcon_cw.c
+++ b/drivers/video/fbdev/core/fbcon_cw.c
@@ -50,7 +50,7 @@ static void cw_bmove(struct vc_data *vc,
 {
 	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_copyarea area;
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p, info);
 
 	area.sx = vxres - ((sy + height) * vc->vc_font.height);
 	area.sy = sx * vc->vc_font.width;
@@ -68,7 +68,7 @@ static void cw_clear(struct vc_data *vc,
 	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_fillrect region;
 	int bgshift = (vc->vc_hi_font_mask) ? 13 : 12;
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p, info);
 
 	region.color = attr_bgcol_ec(bgshift,vc,info);
 	region.dx = vxres - ((sy + height) * vc->vc_font.height);
@@ -125,7 +125,7 @@ static void cw_putcs(struct vc_data *vc,
 	u32 cnt, pitch, size;
 	u32 attribute = get_attribute(info, scr_readw(s));
 	u8 *dst, *buf = NULL;
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -212,7 +212,7 @@ static void cw_cursor(struct vc_data *vc
 	int attribute, use_sw = vc->vc_cursor_type & CUR_SW;
 	int err = 1, dx, dy;
 	char *src;
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -369,7 +369,7 @@ static void cw_cursor(struct vc_data *vc
 static int cw_update_start(struct fb_info *info)
 {
 	struct fbcon_ops *ops = info->fbcon_par;
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p, info);
 	u32 xoffset;
 	int err;
 
--- a/drivers/video/fbdev/core/fbcon_rotate.h
+++ b/drivers/video/fbdev/core/fbcon_rotate.h
@@ -12,11 +12,11 @@
 #define _FBCON_ROTATE_H
 
 #define GETVYRES(s,i) ({                           \
-        (s == SCROLL_REDRAW || s == SCROLL_MOVE) ? \
+        (fb_scrollmode(s) == SCROLL_REDRAW || fb_scrollmode(s) == SCROLL_MOVE) ? \
         (i)->var.yres : (i)->var.yres_virtual; })
 
 #define GETVXRES(s,i) ({                           \
-        (s == SCROLL_REDRAW || s == SCROLL_MOVE || !(i)->fix.xpanstep) ? \
+        (fb_scrollmode(s) == SCROLL_REDRAW || fb_scrollmode(s) == SCROLL_MOVE || !(i)->fix.xpanstep) ? \
         (i)->var.xres : (i)->var.xres_virtual; })
 
 
--- a/drivers/video/fbdev/core/fbcon_ud.c
+++ b/drivers/video/fbdev/core/fbcon_ud.c
@@ -50,8 +50,8 @@ static void ud_bmove(struct vc_data *vc,
 {
 	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_copyarea area;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
+	u32 vxres = GETVXRES(ops->p, info);
 
 	area.sy = vyres - ((sy + height) * vc->vc_font.height);
 	area.sx = vxres - ((sx + width) * vc->vc_font.width);
@@ -69,8 +69,8 @@ static void ud_clear(struct vc_data *vc,
 	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_fillrect region;
 	int bgshift = (vc->vc_hi_font_mask) ? 13 : 12;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
+	u32 vxres = GETVXRES(ops->p, info);
 
 	region.color = attr_bgcol_ec(bgshift,vc,info);
 	region.dy = vyres - ((sy + height) * vc->vc_font.height);
@@ -162,8 +162,8 @@ static void ud_putcs(struct vc_data *vc,
 	u32 mod = vc->vc_font.width % 8, cnt, pitch, size;
 	u32 attribute = get_attribute(info, scr_readw(s));
 	u8 *dst, *buf = NULL;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
+	u32 vxres = GETVXRES(ops->p, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -259,8 +259,8 @@ static void ud_cursor(struct vc_data *vc
 	int attribute, use_sw = vc->vc_cursor_type & CUR_SW;
 	int err = 1, dx, dy;
 	char *src;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
+	u32 vxres = GETVXRES(ops->p, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -410,8 +410,8 @@ static int ud_update_start(struct fb_inf
 {
 	struct fbcon_ops *ops = info->fbcon_par;
 	int xoffset, yoffset;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
+	u32 vxres = GETVXRES(ops->p, info);
 	int err;
 
 	xoffset = vxres - info->var.xres - ops->var.xoffset;

[PATCH 5.10 62/74] perf stat: Fix display of grouped aliased events

[Greg Kroah-Hartman]

From: Ian Rogers <irogers@google.com>

[ Upstream commit b2b1aa73ade982c175ac926a1fd34e76ad628b94 ]

An event may have a number of uncore aliases that when added to the
evlist are consecutive.

If there are multiple uncore events in a group then
parse_events__set_leader_for_uncore_aliase will reorder the evlist so
that events on the same PMU are adjacent.

The collect_all_aliases function assumes that aliases are in blocks so
that only the first counter is printed and all others are marked merged.

The reordering for groups breaks the assumption and so all counts are
printed.

This change removes the assumption from collect_all_aliases
that the events are in blocks and instead processes the entire evlist.

Before:

  ```
  $ perf stat -e '{UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE,UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE},duration_time' -a -A -- sleep 1

   Performance counter stats for 'system wide':

  CPU0                  256,866      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 494,413      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      967      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,738      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  285,161      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 429,920      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      955      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,443      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  310,753      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 416,657      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,231      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,573      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  416,067      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 405,966      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,481      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,447      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  312,911      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 408,154      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,086      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,380      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  333,994      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 370,349      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,287      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,335      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  188,107      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 302,423      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      701      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,070      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  307,221      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 383,642      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,036      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,158      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  318,479      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 821,545      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,028      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   2,550      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  227,618      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 372,272      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      903      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,456      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  376,783      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 419,827      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,406      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,453      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  286,583      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 429,956      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      999      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,436      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  313,867      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 370,159      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,114      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,291      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  342,083      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 409,111      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,399      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,684      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  365,828      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 376,037      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,378      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,411      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  382,456      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 621,743      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,232      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,955      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  342,316      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 385,067      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,176      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,268      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  373,588      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 386,163      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,394      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,464      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  381,206      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 546,891      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,266      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,712      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  221,176      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 392,069      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      831      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,456      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  355,401      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 705,595      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,235      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   2,216      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  371,436      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 428,103      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,306      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,442      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  384,352      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 504,200      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,468      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,860      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  228,856      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 287,976      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      832      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,060      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  215,121      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 334,162      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      681      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,026      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  296,179      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 436,083      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,084      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,525      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  262,296      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 416,573      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      986      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,533      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  285,852      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 359,842      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,073      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,326      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  303,379      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 367,222      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,008      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,156      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  273,487      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 425,449      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      932      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,367      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  297,596      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 414,793      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,140      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,601      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  342,365      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 360,422      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,291      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,342      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  327,196      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 580,858      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,122      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   2,014      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  296,564      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 452,817      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,087      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,694      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  375,002      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 389,393      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,478      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,540      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  365,213      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 594,685      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,401      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   2,222      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0            1,000,749,060 ns   duration_time

         1.000749060 seconds time elapsed
  ```

After:

  ```
   Performance counter stats for 'system wide':

  CPU0               20,547,434      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36              45,202,862      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                   82,001      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                 159,688      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0            1,000,464,828 ns   duration_time

         1.000464828 seconds time elapsed
  ```

Fixes: 3cdc5c2cb924acb4 ("perf parse-events: Handle uncore event aliases in small groups properly")
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Asaf Yaffe <asaf.yaffe@intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kshipra Bopardikar <kshipra.bopardikar@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220205010941.1065469-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/stat-display.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/tools/perf/util/stat-display.c b/tools/perf/util/stat-display.c
index a963b5b8eb724..96fe9c1af3364 100644
--- a/tools/perf/util/stat-display.c
+++ b/tools/perf/util/stat-display.c
@@ -555,15 +555,16 @@ static void collect_all_aliases(struct perf_stat_config *config, struct evsel *c
 
 	alias = list_prepare_entry(counter, &(evlist->core.entries), core.node);
 	list_for_each_entry_continue (alias, &evlist->core.entries, core.node) {
-		if (strcmp(evsel__name(alias), evsel__name(counter)) ||
-		    alias->scale != counter->scale ||
-		    alias->cgrp != counter->cgrp ||
-		    strcmp(alias->unit, counter->unit) ||
-		    evsel__is_clock(alias) != evsel__is_clock(counter) ||
-		    !strcmp(alias->pmu_name, counter->pmu_name))
-			break;
-		alias->merged_stat = true;
-		cb(config, alias, data, false);
+		/* Merge events with the same name, etc. but on different PMUs. */
+		if (!strcmp(evsel__name(alias), evsel__name(counter)) &&
+			alias->scale == counter->scale &&
+			alias->cgrp == counter->cgrp &&
+			!strcmp(alias->unit, counter->unit) &&
+			evsel__is_clock(alias) == evsel__is_clock(counter) &&
+			strcmp(alias->pmu_name, counter->pmu_name)) {
+			alias->merged_stat = true;
+			cb(config, alias, data, false);
+		}
 	}
 }
 
-- 
2.34.1

[PATCH 5.10 63/74] perf/x86/intel/pt: Fix crash with stop filters in single-range mode

[Greg Kroah-Hartman]

From: Tristan Hume <tristan@thume.ca>

commit 1d9093457b243061a9bba23543c38726e864a643 upstream.

Add a check for !buf->single before calling pt_buffer_region_size in a
place where a missing check can cause a kernel crash.

Fixes a bug introduced by commit 670638477aed ("perf/x86/intel/pt:
Opportunistically use single range output mode"), which added a
support for PT single-range output mode. Since that commit if a PT
stop filter range is hit while tracing, the kernel will crash because
of a null pointer dereference in pt_handle_status due to calling
pt_buffer_region_size without a ToPA configured.

The commit which introduced single-range mode guarded almost all uses of
the ToPA buffer variables with checks of the buf->single variable, but
missed the case where tracing was stopped by the PT hardware, which
happens when execution hits a configured stop filter.

Tested that hitting a stop filter while PT recording successfully
records a trace with this patch but crashes without this patch.

Fixes: 670638477aed ("perf/x86/intel/pt: Opportunistically use single range output mode")
Signed-off-by: Tristan Hume <tristan@thume.ca>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@kernel.org
Link: https://lkml.kernel.org/r/20220127220806.73664-1-tristan@thume.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/events/intel/pt.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/arch/x86/events/intel/pt.c
+++ b/arch/x86/events/intel/pt.c
@@ -897,8 +897,9 @@ static void pt_handle_status(struct pt *
 		 * means we are already losing data; need to let the decoder
 		 * know.
 		 */
-		if (!intel_pt_validate_hw_cap(PT_CAP_topa_multiple_entries) ||
-		    buf->output_off == pt_buffer_region_size(buf)) {
+		if (!buf->single &&
+		    (!intel_pt_validate_hw_cap(PT_CAP_topa_multiple_entries) ||
+		     buf->output_off == pt_buffer_region_size(buf))) {
 			perf_aux_output_flag(&pt->handle,
 			                     PERF_AUX_FLAG_TRUNCATED);
 			advance++;

[PATCH 5.10 64/74] x86/perf: Default set FREEZE_ON_SMI for all

[Greg Kroah-Hartman]

From: Peter Zijlstra <peterz@infradead.org>

commit a01994f5e5c79d3a35e5e8cf4252c7f2147323c3 upstream.

Kyle reported that rr[0] has started to malfunction on Comet Lake and
later CPUs due to EFI starting to make use of CPL3 [1] and the PMU
event filtering not distinguishing between regular CPL3 and SMM CPL3.

Since this is a privilege violation, default disable SMM visibility
where possible.

Administrators wanting to observe SMM cycles can easily change this
using the sysfs attribute while regular users don't have access to
this file.

[0] https://rr-project.org/

[1] See the Intel white paper "Trustworthy SMM on the Intel vPro Platform"
at https://bugzilla.kernel.org/attachment.cgi?id=300300, particularly the
end of page 5.

Reported-by: Kyle Huey <me@kylehuey.com>
Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@kernel.org
Link: https://lkml.kernel.org/r/YfKChjX61OW4CkYm@hirez.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/events/intel/core.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -4353,6 +4353,19 @@ static __initconst const struct x86_pmu
 	.lbr_read		= intel_pmu_lbr_read_64,
 	.lbr_save		= intel_pmu_lbr_save,
 	.lbr_restore		= intel_pmu_lbr_restore,
+
+	/*
+	 * SMM has access to all 4 rings and while traditionally SMM code only
+	 * ran in CPL0, 2021-era firmware is starting to make use of CPL3 in SMM.
+	 *
+	 * Since the EVENTSEL.{USR,OS} CPL filtering makes no distinction
+	 * between SMM or not, this results in what should be pure userspace
+	 * counters including SMM data.
+	 *
+	 * This is a clear privilege issue, therefore globally disable
+	 * counting SMM by default.
+	 */
+	.attr_freeze_on_smi	= 1,
 };
 
 static __init void intel_clovertown_quirk(void)

[PATCH 5.10 65/74] EDAC/altera: Fix deferred probing

[Greg Kroah-Hartman]

From: Sergey Shtylyov <s.shtylyov@omp.ru>

commit 279eb8575fdaa92c314a54c0d583c65e26229107 upstream.

The driver overrides the error codes returned by platform_get_irq() to
-ENODEV for some strange reason, so if it returns -EPROBE_DEFER, the
driver will fail the probe permanently instead of the deferred probing.
Switch to propagating the proper error codes to platform driver code
upwards.

  [ bp: Massage commit message. ]

Fixes: 71bcada88b0f ("edac: altera: Add Altera SDRAM EDAC support")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220124185503.6720-2-s.shtylyov@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/edac/altera_edac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -349,7 +349,7 @@ static int altr_sdram_probe(struct platf
 	if (irq < 0) {
 		edac_printk(KERN_ERR, EDAC_MC,
 			    "No irq %d in DT\n", irq);
-		return -ENODEV;
+		return irq;
 	}
 
 	/* Arria10 has a 2nd IRQ */

[PATCH 5.10 66/74] EDAC/xgene: Fix deferred probing

[Greg Kroah-Hartman]

From: Sergey Shtylyov <s.shtylyov@omp.ru>

commit dfd0dfb9a7cc04acf93435b440dd34c2ca7b4424 upstream.

The driver overrides error codes returned by platform_get_irq_optional()
to -EINVAL for some strange reason, so if it returns -EPROBE_DEFER, the
driver will fail the probe permanently instead of the deferred probing.
Switch to propagating the proper error codes to platform driver code
upwards.

  [ bp: Massage commit message. ]

Fixes: 0d4429301c4a ("EDAC: Add APM X-Gene SoC EDAC driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220124185503.6720-3-s.shtylyov@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/edac/xgene_edac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/edac/xgene_edac.c
+++ b/drivers/edac/xgene_edac.c
@@ -1919,7 +1919,7 @@ static int xgene_edac_probe(struct platf
 			irq = platform_get_irq(pdev, i);
 			if (irq < 0) {
 				dev_err(&pdev->dev, "No IRQ resource\n");
-				rc = -EINVAL;
+				rc = irq;
 				goto out_err;
 			}
 			rc = devm_request_irq(&pdev->dev, irq,

[PATCH 5.10 67/74] ext4: prevent used blocks from being allocated during fast commit replay

[Greg Kroah-Hartman]

From: Xin Yin <yinxin.x@bytedance.com>

commit 599ea31d13617c5484c40cdf50d88301dc351cfc upstream.

During fast commit replay procedure, we clear inode blocks bitmap in
ext4_ext_clear_bb(), this may cause ext4_mb_new_blocks_simple() allocate
blocks still in use.

Make ext4_fc_record_regions() also record physical disk regions used by
inodes during replay procedure. Then ext4_mb_new_blocks_simple() can
excludes these blocks in use.

Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Link: https://lore.kernel.org/r/20220110035141.1980-2-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/ext4.h        |    3 +++
 fs/ext4/extents.c     |    4 ++++
 fs/ext4/fast_commit.c |   20 +++++++++++++++-----
 3 files changed, 22 insertions(+), 5 deletions(-)

--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -2779,6 +2779,9 @@ void ext4_fc_replay_cleanup(struct super
 int ext4_fc_commit(journal_t *journal, tid_t commit_tid);
 int __init ext4_fc_init_dentry_cache(void);
 void ext4_fc_destroy_dentry_cache(void);
+int ext4_fc_record_regions(struct super_block *sb, int ino,
+			   ext4_lblk_t lblk, ext4_fsblk_t pblk,
+			   int len, int replay);
 
 /* mballoc.c */
 extern const struct seq_operations ext4_mb_seq_groups_ops;
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -6088,11 +6088,15 @@ int ext4_ext_clear_bb(struct inode *inod
 
 					ext4_mb_mark_bb(inode->i_sb,
 							path[j].p_block, 1, 0);
+					ext4_fc_record_regions(inode->i_sb, inode->i_ino,
+							0, path[j].p_block, 1, 1);
 				}
 				ext4_ext_drop_refs(path);
 				kfree(path);
 			}
 			ext4_mb_mark_bb(inode->i_sb, map.m_pblk, map.m_len, 0);
+			ext4_fc_record_regions(inode->i_sb, inode->i_ino,
+					map.m_lblk, map.m_pblk, map.m_len, 1);
 		}
 		cur = cur + map.m_len;
 	}
--- a/fs/ext4/fast_commit.c
+++ b/fs/ext4/fast_commit.c
@@ -1558,16 +1558,23 @@ out:
 }
 
 /*
- * Record physical disk regions which are in use as per fast commit area. Our
- * simple replay phase allocator excludes these regions from allocation.
+ * Record physical disk regions which are in use as per fast commit area,
+ * and used by inodes during replay phase. Our simple replay phase
+ * allocator excludes these regions from allocation.
  */
-static int ext4_fc_record_regions(struct super_block *sb, int ino,
-		ext4_lblk_t lblk, ext4_fsblk_t pblk, int len)
+int ext4_fc_record_regions(struct super_block *sb, int ino,
+		ext4_lblk_t lblk, ext4_fsblk_t pblk, int len, int replay)
 {
 	struct ext4_fc_replay_state *state;
 	struct ext4_fc_alloc_region *region;
 
 	state = &EXT4_SB(sb)->s_fc_replay_state;
+	/*
+	 * during replay phase, the fc_regions_valid may not same as
+	 * fc_regions_used, update it when do new additions.
+	 */
+	if (replay && state->fc_regions_used != state->fc_regions_valid)
+		state->fc_regions_used = state->fc_regions_valid;
 	if (state->fc_regions_used == state->fc_regions_size) {
 		state->fc_regions_size +=
 			EXT4_FC_REPLAY_REALLOC_INCREMENT;
@@ -1585,6 +1592,9 @@ static int ext4_fc_record_regions(struct
 	region->pblk = pblk;
 	region->len = len;
 
+	if (replay)
+		state->fc_regions_valid++;
+
 	return 0;
 }
 
@@ -1954,7 +1964,7 @@ static int ext4_fc_replay_scan(journal_t
 			ret = ext4_fc_record_regions(sb,
 				le32_to_cpu(ext.fc_ino),
 				le32_to_cpu(ex->ee_block), ext4_ext_pblock(ex),
-				ext4_ext_get_actual_len(ex));
+				ext4_ext_get_actual_len(ex), 0);
 			if (ret < 0)
 				break;
 			ret = JBD2_FC_REPLAY_CONTINUE;

[PATCH 5.10 68/74] ext4: modify the logic of ext4_mb_new_blocks_simple

[Greg Kroah-Hartman]

From: Xin Yin <yinxin.x@bytedance.com>

commit 31a074a0c62dc0d2bfb9b543142db4fe27f9e5eb upstream.

For now in ext4_mb_new_blocks_simple, if we found a block which
should be excluded then will switch to next group, this may
probably cause 'group' run out of range.

Change to check next block in the same group when get a block should
be excluded. Also change the search range to EXT4_CLUSTERS_PER_GROUP
and add error checking.

Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20220110035141.1980-3-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/mballoc.c |   26 +++++++++++++++++---------
 1 file changed, 17 insertions(+), 9 deletions(-)

--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -5173,7 +5173,8 @@ static ext4_fsblk_t ext4_mb_new_blocks_s
 	struct super_block *sb = ar->inode->i_sb;
 	ext4_group_t group;
 	ext4_grpblk_t blkoff;
-	int i = sb->s_blocksize;
+	ext4_grpblk_t max = EXT4_CLUSTERS_PER_GROUP(sb);
+	ext4_grpblk_t i = 0;
 	ext4_fsblk_t goal, block;
 	struct ext4_super_block *es = EXT4_SB(sb)->s_es;
 
@@ -5195,19 +5196,26 @@ static ext4_fsblk_t ext4_mb_new_blocks_s
 		ext4_get_group_no_and_offset(sb,
 			max(ext4_group_first_block_no(sb, group), goal),
 			NULL, &blkoff);
-		i = mb_find_next_zero_bit(bitmap_bh->b_data, sb->s_blocksize,
+		while (1) {
+			i = mb_find_next_zero_bit(bitmap_bh->b_data, max,
 						blkoff);
+			if (i >= max)
+				break;
+			if (ext4_fc_replay_check_excluded(sb,
+				ext4_group_first_block_no(sb, group) + i)) {
+				blkoff = i + 1;
+			} else
+				break;
+		}
 		brelse(bitmap_bh);
-		if (i >= sb->s_blocksize)
-			continue;
-		if (ext4_fc_replay_check_excluded(sb,
-			ext4_group_first_block_no(sb, group) + i))
-			continue;
-		break;
+		if (i < max)
+			break;
 	}
 
-	if (group >= ext4_get_groups_count(sb) && i >= sb->s_blocksize)
+	if (group >= ext4_get_groups_count(sb) || i >= max) {
+		*errp = -ENOSPC;
 		return 0;
+	}
 
 	block = ext4_group_first_block_no(sb, group) + i;
 	ext4_mb_mark_bb(sb, block, 1, 1);

[PATCH 5.10 69/74] ext4: fix error handling in ext4_restore_inline_data()

[Greg Kroah-Hartman]

From: Ritesh Harjani <riteshh@linux.ibm.com>

commit 897026aaa73eb2517dfea8d147f20ddb0b813044 upstream.

While running "./check -I 200 generic/475" it sometimes gives below
kernel BUG(). Ideally we should not call ext4_write_inline_data() if
ext4_create_inline_data() has failed.

<log snip>
[73131.453234] kernel BUG at fs/ext4/inline.c:223!

<code snip>
 212 static void ext4_write_inline_data(struct inode *inode, struct ext4_iloc *iloc,
 213                                    void *buffer, loff_t pos, unsigned int len)
 214 {
<...>
 223         BUG_ON(!EXT4_I(inode)->i_inline_off);
 224         BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);

This patch handles the error and prints out a emergency msg saying potential
data loss for the given inode (since we couldn't restore the original
inline_data due to some previous error).

[ 9571.070313] EXT4-fs (dm-0): error restoring inline_data for inode -- potential data loss! (inode 1703982, error -30)

Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/9f4cd7dfd54fa58ff27270881823d94ddf78dd07.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/inline.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -1120,7 +1120,15 @@ static void ext4_restore_inline_data(han
 				     struct ext4_iloc *iloc,
 				     void *buf, int inline_size)
 {
-	ext4_create_inline_data(handle, inode, inline_size);
+	int ret;
+
+	ret = ext4_create_inline_data(handle, inode, inline_size);
+	if (ret) {
+		ext4_msg(inode->i_sb, KERN_EMERG,
+			"error restoring inline_data for inode -- potential data loss! (inode %lu, error %d)",
+			inode->i_ino, ret);
+		return;
+	}
 	ext4_write_inline_data(inode, iloc, buf, 0, inline_size);
 	ext4_set_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
 }

[PATCH 5.10 70/74] ext4: fix error handling in ext4_fc_record_modified_inode()

[Greg Kroah-Hartman]

From: Ritesh Harjani <riteshh@linux.ibm.com>

commit cdce59a1549190b66f8e3fe465c2b2f714b98a94 upstream.

Current code does not fully takes care of krealloc() error case, which
could lead to silent memory corruption or a kernel bug.  This patch
fixes that.

Also it cleans up some duplicated error handling logic from various
functions in fast_commit.c file.

Reported-by: luo penghao <luo.penghao@zte.com.cn>
Suggested-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/62e8b6a1cce9359682051deb736a3c0953c9d1e9.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/fast_commit.c |   64 ++++++++++++++++++++++----------------------------
 1 file changed, 29 insertions(+), 35 deletions(-)

--- a/fs/ext4/fast_commit.c
+++ b/fs/ext4/fast_commit.c
@@ -1388,14 +1388,15 @@ static int ext4_fc_record_modified_inode
 		if (state->fc_modified_inodes[i] == ino)
 			return 0;
 	if (state->fc_modified_inodes_used == state->fc_modified_inodes_size) {
-		state->fc_modified_inodes_size +=
-			EXT4_FC_REPLAY_REALLOC_INCREMENT;
 		state->fc_modified_inodes = krealloc(
-					state->fc_modified_inodes, sizeof(int) *
-					state->fc_modified_inodes_size,
-					GFP_KERNEL);
+				state->fc_modified_inodes,
+				sizeof(int) * (state->fc_modified_inodes_size +
+				EXT4_FC_REPLAY_REALLOC_INCREMENT),
+				GFP_KERNEL);
 		if (!state->fc_modified_inodes)
 			return -ENOMEM;
+		state->fc_modified_inodes_size +=
+			EXT4_FC_REPLAY_REALLOC_INCREMENT;
 	}
 	state->fc_modified_inodes[state->fc_modified_inodes_used++] = ino;
 	return 0;
@@ -1427,7 +1428,9 @@ static int ext4_fc_replay_inode(struct s
 	}
 	inode = NULL;
 
-	ext4_fc_record_modified_inode(sb, ino);
+	ret = ext4_fc_record_modified_inode(sb, ino);
+	if (ret)
+		goto out;
 
 	raw_fc_inode = (struct ext4_inode *)
 		(val + offsetof(struct ext4_fc_inode, fc_raw_inode));
@@ -1626,6 +1629,8 @@ static int ext4_fc_replay_add_range(stru
 	}
 
 	ret = ext4_fc_record_modified_inode(sb, inode->i_ino);
+	if (ret)
+		goto out;
 
 	start = le32_to_cpu(ex->ee_block);
 	start_pblk = ext4_ext_pblock(ex);
@@ -1643,18 +1648,14 @@ static int ext4_fc_replay_add_range(stru
 		map.m_pblk = 0;
 		ret = ext4_map_blocks(NULL, inode, &map, 0);
 
-		if (ret < 0) {
-			iput(inode);
-			return 0;
-		}
+		if (ret < 0)
+			goto out;
 
 		if (ret == 0) {
 			/* Range is not mapped */
 			path = ext4_find_extent(inode, cur, NULL, 0);
-			if (IS_ERR(path)) {
-				iput(inode);
-				return 0;
-			}
+			if (IS_ERR(path))
+				goto out;
 			memset(&newex, 0, sizeof(newex));
 			newex.ee_block = cpu_to_le32(cur);
 			ext4_ext_store_pblock(
@@ -1668,10 +1669,8 @@ static int ext4_fc_replay_add_range(stru
 			up_write((&EXT4_I(inode)->i_data_sem));
 			ext4_ext_drop_refs(path);
 			kfree(path);
-			if (ret) {
-				iput(inode);
-				return 0;
-			}
+			if (ret)
+				goto out;
 			goto next;
 		}
 
@@ -1684,10 +1683,8 @@ static int ext4_fc_replay_add_range(stru
 			ret = ext4_ext_replay_update_ex(inode, cur, map.m_len,
 					ext4_ext_is_unwritten(ex),
 					start_pblk + cur - start);
-			if (ret) {
-				iput(inode);
-				return 0;
-			}
+			if (ret)
+				goto out;
 			/*
 			 * Mark the old blocks as free since they aren't used
 			 * anymore. We maintain an array of all the modified
@@ -1707,10 +1704,8 @@ static int ext4_fc_replay_add_range(stru
 			ext4_ext_is_unwritten(ex), map.m_pblk);
 		ret = ext4_ext_replay_update_ex(inode, cur, map.m_len,
 					ext4_ext_is_unwritten(ex), map.m_pblk);
-		if (ret) {
-			iput(inode);
-			return 0;
-		}
+		if (ret)
+			goto out;
 		/*
 		 * We may have split the extent tree while toggling the state.
 		 * Try to shrink the extent tree now.
@@ -1722,6 +1717,7 @@ next:
 	}
 	ext4_ext_replay_shrink_inode(inode, i_size_read(inode) >>
 					sb->s_blocksize_bits);
+out:
 	iput(inode);
 	return 0;
 }
@@ -1751,6 +1747,8 @@ ext4_fc_replay_del_range(struct super_bl
 	}
 
 	ret = ext4_fc_record_modified_inode(sb, inode->i_ino);
+	if (ret)
+		goto out;
 
 	jbd_debug(1, "DEL_RANGE, inode %ld, lblk %d, len %d\n",
 			inode->i_ino, le32_to_cpu(lrange.fc_lblk),
@@ -1760,10 +1758,8 @@ ext4_fc_replay_del_range(struct super_bl
 		map.m_len = remaining;
 
 		ret = ext4_map_blocks(NULL, inode, &map, 0);
-		if (ret < 0) {
-			iput(inode);
-			return 0;
-		}
+		if (ret < 0)
+			goto out;
 		if (ret > 0) {
 			remaining -= ret;
 			cur += ret;
@@ -1778,15 +1774,13 @@ ext4_fc_replay_del_range(struct super_bl
 	ret = ext4_ext_remove_space(inode, lrange.fc_lblk,
 				lrange.fc_lblk + lrange.fc_len - 1);
 	up_write(&EXT4_I(inode)->i_data_sem);
-	if (ret) {
-		iput(inode);
-		return 0;
-	}
+	if (ret)
+		goto out;
 	ext4_ext_replay_shrink_inode(inode,
 		i_size_read(inode) >> sb->s_blocksize_bits);
 	ext4_mark_inode_dirty(NULL, inode);
+out:
 	iput(inode);
-
 	return 0;
 }
 

[PATCH 5.10 71/74] ext4: fix incorrect type issue during replay_del_range

[Greg Kroah-Hartman]

From: Xin Yin <yinxin.x@bytedance.com>

commit 8fca8a2b0a822f7936130af7299d2fd7f0a66714 upstream.

should not use fast commit log data directly, add le32_to_cpu().

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 0b5b5a62b945 ("ext4: use ext4_ext_remove_space() for fast commit replay delete range")
Cc: stable@kernel.org
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20220126063146.2302-1-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/fast_commit.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/fs/ext4/fast_commit.c
+++ b/fs/ext4/fast_commit.c
@@ -1771,8 +1771,9 @@ ext4_fc_replay_del_range(struct super_bl
 	}
 
 	down_write(&EXT4_I(inode)->i_data_sem);
-	ret = ext4_ext_remove_space(inode, lrange.fc_lblk,
-				lrange.fc_lblk + lrange.fc_len - 1);
+	ret = ext4_ext_remove_space(inode, le32_to_cpu(lrange.fc_lblk),
+				le32_to_cpu(lrange.fc_lblk) +
+				le32_to_cpu(lrange.fc_len) - 1);
 	up_write(&EXT4_I(inode)->i_data_sem);
 	if (ret)
 		goto out;

[PATCH 5.10 72/74] net: dsa: mt7530: make NET_DSA_MT7530 select MEDIATEK_GE_PHY

[Greg Kroah-Hartman]

From: Arınç ÜNAL <arinc.unal@arinc9.com>

commit 4223f86512877b04c932e7203648b37eec931731 upstream.

Make MediaTek MT753x DSA driver enable MediaTek Gigabit PHYs driver to
properly control MT7530 and MT7531 switch PHYs.

A noticeable change is that the behaviour of switchport interfaces going
up-down-up-down is no longer there.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220129062703.595-1-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -36,6 +36,7 @@ config NET_DSA_MT7530
 	tristate "MediaTek MT753x and MT7621 Ethernet switch support"
 	depends on NET_DSA
 	select NET_DSA_TAG_MTK
+	select MEDIATEK_GE_PHY
 	help
 	  This enables support for the MediaTek MT7530, MT7531, and MT7621
 	  Ethernet switch chips.

[PATCH 5.10 73/74] cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning

[Greg Kroah-Hartman]

From: Waiman Long <longman@redhat.com>

commit 2bdfd2825c9662463371e6691b1a794e97fa36b4 upstream.

It was found that a "suspicious RCU usage" lockdep warning was issued
with the rcu_read_lock() call in update_sibling_cpumasks().  It is
because the update_cpumasks_hier() function may sleep. So we have
to release the RCU lock, call update_cpumasks_hier() and reacquire
it afterward.

Also add a percpu_rwsem_assert_held() in update_sibling_cpumasks()
instead of stating that in the comment.

Fixes: 4716909cc5c5 ("cpuset: Track cpusets that use parent's effective_cpus")
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/cgroup/cpuset.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -1481,10 +1481,15 @@ static void update_sibling_cpumasks(stru
 	struct cpuset *sibling;
 	struct cgroup_subsys_state *pos_css;
 
+	percpu_rwsem_assert_held(&cpuset_rwsem);
+
 	/*
 	 * Check all its siblings and call update_cpumasks_hier()
 	 * if their use_parent_ecpus flag is set in order for them
 	 * to use the right effective_cpus value.
+	 *
+	 * The update_cpumasks_hier() function may sleep. So we have to
+	 * release the RCU read lock before calling it.
 	 */
 	rcu_read_lock();
 	cpuset_for_each_child(sibling, pos_css, parent) {
@@ -1492,8 +1497,13 @@ static void update_sibling_cpumasks(stru
 			continue;
 		if (!sibling->use_parent_ecpus)
 			continue;
+		if (!css_tryget_online(&sibling->css))
+			continue;
 
+		rcu_read_unlock();
 		update_cpumasks_hier(sibling, tmp);
+		rcu_read_lock();
+		css_put(&sibling->css);
 	}
 	rcu_read_unlock();
 }

[PATCH 5.10 74/74] selftests: nft_concat_range: add test for reload with no element add/del

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

commit eda0cf1202acf1ef47f93d8f92d4839213431424 upstream.

Add a specific test for the reload issue fixed with
commit 23c54263efd7cb ("netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone").

Add to set, then flush set content + restore without other add/remove in
the transaction.

On kernels before the fix, this test case fails:
  net,mac with reload    [FAIL]

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/netfilter/nft_concat_range.sh |   72 +++++++++++++++++-
 1 file changed, 71 insertions(+), 1 deletion(-)

--- a/tools/testing/selftests/netfilter/nft_concat_range.sh
+++ b/tools/testing/selftests/netfilter/nft_concat_range.sh
@@ -27,7 +27,7 @@ TYPES="net_port port_net net6_port port_
        net_port_mac_proto_net"
 
 # Reported bugs, also described by TYPE_ variables below
-BUGS="flush_remove_add"
+BUGS="flush_remove_add reload"
 
 # List of possible paths to pktgen script from kernel tree for performance tests
 PKTGEN_SCRIPT_PATHS="
@@ -337,6 +337,23 @@ TYPE_flush_remove_add="
 display		Add two elements, flush, re-add
 "
 
+TYPE_reload="
+display		net,mac with reload
+type_spec	ipv4_addr . ether_addr
+chain_spec	ip daddr . ether saddr
+dst		addr4
+src		mac
+start		1
+count		1
+src_delta	2000
+tools		sendip nc bash
+proto		udp
+
+race_repeat	0
+
+perf_duration	0
+"
+
 # Set template for all tests, types and rules are filled in depending on test
 set_template='
 flush ruleset
@@ -1455,6 +1472,59 @@ test_bug_flush_remove_add() {
 	nft flush ruleset
 }
 
+# - add ranged element, check that packets match it
+# - reload the set, check packets still match
+test_bug_reload() {
+	setup veth send_"${proto}" set || return ${KSELFTEST_SKIP}
+	rstart=${start}
+
+	range_size=1
+	for i in $(seq "${start}" $((start + count))); do
+		end=$((start + range_size))
+
+		# Avoid negative or zero-sized port ranges
+		if [ $((end / 65534)) -gt $((start / 65534)) ]; then
+			start=${end}
+			end=$((end + 1))
+		fi
+		srcstart=$((start + src_delta))
+		srcend=$((end + src_delta))
+
+		add "$(format)" || return 1
+		range_size=$((range_size + 1))
+		start=$((end + range_size))
+	done
+
+	# check kernel does allocate pcpu sctrach map
+	# for reload with no elemet add/delete
+	( echo flush set inet filter test ;
+	  nft list set inet filter test ) | nft -f -
+
+	start=${rstart}
+	range_size=1
+
+	for i in $(seq "${start}" $((start + count))); do
+		end=$((start + range_size))
+
+		# Avoid negative or zero-sized port ranges
+		if [ $((end / 65534)) -gt $((start / 65534)) ]; then
+			start=${end}
+			end=$((end + 1))
+		fi
+		srcstart=$((start + src_delta))
+		srcend=$((end + src_delta))
+
+		for j in $(seq ${start} $((range_size / 2 + 1)) ${end}); do
+			send_match "${j}" $((j + src_delta)) || return 1
+		done
+
+		range_size=$((range_size + 1))
+		start=$((end + range_size))
+	done
+
+	nft flush ruleset
+}
+
 test_reported_issues() {
 	eval test_bug_"${subtest}"
 }

Re: [PATCH 5.10 00/74] 5.10.99-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 719 bytes --]

Hi!

> This is the start of the stable review cycle for the 5.10.99 release.
> There are 74 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any new kernel problems here (but we still
hit the gmp.h compilation issue):

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 5.10 00/74] 5.10.99-rc1 review

[Shuah Khan]

On 2/7/22 4:05 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.99 release.
> There are 74 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.99-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.10 00/74] 5.10.99-rc1 review

[Guenter Roeck]

On Mon, Feb 07, 2022 at 12:05:58PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.99 release.
> There are 74 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 161 pass: 161 fail: 0
Qemu test results:
	total: 477 pass: 477 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.10 00/74] 5.10.99-rc1 review

[Florian Fainelli]

On 2/7/22 3:05 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.99 release.
> There are 74 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.99-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.10 00/74] 5.10.99-rc1 review

[Slade Watkins]

On Mon, Feb 7, 2022, at 6:05 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.99 release.
> There are 74 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.

Compiled and booted 5.10.99-rc1 on my x86_64 test system successfully without errors or regressions.

Tested-by: Slade Watkins <slade@sladewatkins.com>

Thanks,
Slade

Re: [PATCH 5.10 00/74] 5.10.99-rc1 review

[Naresh Kamboju]

On Mon, 7 Feb 2022 at 16:51, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.10.99 release.
> There are 74 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.99-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.10.99-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.10.y
* git commit: 9f5cb871ceb99f4667e351fd556d9de87b0de526
* git describe: v5.10.98-75-g9f5cb871ceb9
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.98-75-g9f5cb871ceb9

## Test Regressions (compared to v5.10.98)
No test regressions found.

## Metric Regressions (compared to v5.10.98)
No metric regressions found.

## Test Fixes (compared to v5.10.98)
No test fixes found.

## Metric Fixes (compared to v5.10.98)
No metric fixes found.

## Test result summary
total: 101051, pass: 86633, fail: 563, skip: 12965, xfail: 890

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 259 total, 259 passed, 0 failed
* arm64: 37 total, 37 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 36 total, 36 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 34 total, 34 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 52 total, 46 passed, 6 failed
* riscv: 24 total, 22 passed, 2 failed
* s390: 18 total, 18 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 37 total, 37 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.10 00/74] 5.10.99-rc1 review

[Jon Hunter]

On Mon, 07 Feb 2022 12:05:58 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.99 release.
> There are 74 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.99-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.10:
    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    75 tests:	75 pass, 0 fail

Linux version:	5.10.99-rc1-g9f5cb871ceb9
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 5.10 00/74] 5.10.99-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Mon, Feb 07, 2022 at 12:05:58PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.99 release.
> There are 74 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.2.1 20220121): 63 configs -> no new failure
arm (gcc version 11.2.1 20220121): 105 configs -> no new failure
arm64 (gcc version 11.2.1 20220121): 3 configs -> no failure
x86_64 (gcc version 11.2.1 20220121): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]

[1]. https://openqa.qa.codethink.co.uk/tests/724
[2]. https://openqa.qa.codethink.co.uk/tests/726


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip

RE: [PATCH 5.10 00/74] 5.10.99-rc1 review

[Fox Chen]

On Mon,  7 Feb 2022 12:05:58 +0100, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 5.10.99 release.
> There are 74 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.99-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

5.10.99-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
                
Tested-by: Fox Chen <foxhlchen@gmail.com>

Re: [PATCH 5.10 00/74] 5.10.99-rc1 review

[Samuel Zou]

On 2022/2/7 19:05, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.99 release.
> There are 74 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.99-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 5.10.99-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version: 5.10.99-rc1
Commit: 9f5cb871ceb99f4667e351fd556d9de87b0de526
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9014
passed: 9014
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9014
passed: 9014
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>

Re: [PATCH 5.10 72/74] net: dsa: mt7530: make NET_DSA_MT7530 select MEDIATEK_GE_PHY

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 851 bytes --]

Hi!

> From: Arınç ÜNAL <arinc.unal@arinc9.com>
> 
> commit 4223f86512877b04c932e7203648b37eec931731 upstream.
> 
> Make MediaTek MT753x DSA driver enable MediaTek Gigabit PHYs driver to
> properly control MT7530 and MT7531 switch PHYs.
> 
> A noticeable change is that the behaviour of switchport interfaces going
> up-down-up-down is no longer there.

This is unsuitable for 5.10 at least:

> +++ b/drivers/net/dsa/Kconfig
> @@ -36,6 +36,7 @@ config NET_DSA_MT7530
>  	tristate "MediaTek MT753x and MT7621 Ethernet switch support"
>  	depends on NET_DSA
>  	select NET_DSA_TAG_MTK
> +	select MEDIATEK_GE_PHY

This symbol does not exist in 5.10.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]